Measuring and testing equipment. Run-out testers Comparator stands Small measuring instruments

Transcription

1 Run-out testers omparator stands Small measuring instruments

2 enennung rtikel-nr. omparator stands with round table MT MT 0 MT MT 0 MT 0 K MT 0 R (MT 0 with horizontal measuring frame M ) The table surfaces of models MT and MT 0 are lapped. The table of MT 0 K is made of high-quality l O.% ceramic and is also lapped. The columns of all models are made of hardened and precision-ground steel. MT 0 The measuring frame of MT can be inclined to an optimal working position. Measuring inserts for MT : MT -: Measuring table plate dia. mm MT -: Measuring table plate dia. mm Model with fine adjustment of dial gauge height. djustment range mm. llgemeintoleranzen IN ISO -m orm- und Lagetoleranzen IN ISO -H Kom.Nr. Kd.Nr. atum Name earb..0.0 insterle Gepr. Maßstab :, / (:,) Position mae Robe Maßblatt MT 0 Modell.0.0 insterle Zust. Änderungen atum Name iese Zeichnung darf ohne unsere Zeichnungsnummer d r i t t e n P e r s o n e n zugeleitet werden. ( des Unl.WG.,..0) enz-0000z Ursprung rsatz für rse Genehmigung weder vervielfältigt, noch Model MT MT 0 MT 0 K MT 0 MT 0 K Total height mm Measuring range vertical mm Reach mm Measuring table dia. mm latness µm olumn diameter mm ial gauge holder mm H H H H H Measuring table material Steel Steel eramic Steel eramic Weight kg approx.. approx.. approx.. approx.. approx.. Horizontal measuring frame M Reach of measuring frame mm 0 Size of gap mm 0 its column diameter mm ial gauge holder mm H approx. Weight kg 0. The measuring frame of M can be used with all measuring tables with a column diameter of mm. It can be used for run-out tests and for measurements of grooves and recesses on cylinders. xtras Horizontal measuring frame M 0 ial gauges are not included.

3 enennung rtikel-nr. iese Zeichnung darf ohne unsere Zeichnungsnummer Genehmigung weder vervielfältigt, noch d r i t t e n P e r s o n e n zugeleitet werden. ( des Unl.WG.,..0) Robert-oschstr. Neuhausen omparator stands with a rectangular table MT 0 The table surfaces of models MT 0 and MT 0 b are lapped. MT 0 The tables of MT 0 K and MT 0 bk are made of high-quality l O.% ceramic and are also lapped. The columns of all models are made of hardened and precision-ground steel. MT 0 b MT 0 K MT 0 bk llgemeintoleranzen IN ISO -m orm- und Lagetoleranzen IN ISO -H Kom.Nr. Kd.Nr. atum Name earb..0.0 insterle Gepr. Maßstab : / (:) Position Menge maederpressen GmbH MT 0 b Modell.0.0 insterle Zust. Änderungen atum Name Ursprung enz-0000z rsatz für rsetzt durch latt Model MT 0 MT 0 b MT 0 K MT 0 bk Total height mm Measuring range vertical mm Measuring range horizontal mm ross arm length mm Measuring table dia. mm 0 x 0 x 0 x 0 x olumn diameter mm ial gauge holder mm H H H H Measuring table material Steel Steel eramic eramic latness µm ust grooves Weight kg approx.. approx.. approx.. approx.. xtras Measuring frame M Subject to technical modifications

4 omparator stands with rectangular table MT The table surfaces of models MT and MT b are lapped. MT MT b The tables of models MT K and MT bk are made of high-quality lapped l O.% ceramic. The columns of all models are made of hardened and precision-ground steel. Measuring tables MT b and MT bk have interchangeable dial gauge holders. MT K MT bk Model MT MT b MT K MT bk Total height mm 00 Measuring range vertical mm 0 Measuring range horizontal mm ross arm length mm Measuring table area mm x x x x olumn diameter mm ial gauge holder mm H H H H Measuring table material Steel Steel eramic eramic latness µm.. ust grooves Weight kg approx..0 approx.. approx..0 approx.. ial gauges are not included.

5 xtra-sturdy comparator stands MT U MT -U MT -U MT -U The dial gauge holders of these models are interchangeable. Holders can be supplied with 0H, H, H and 0H holes. dapters for commonly used electronic length measuring probes are available. Model MT U- MT U- MT U- Total height mm Measuring range vertical mm Measuring range horizontal mm Measuring table area mm dia. x Measuring block V-block depth mm / 0 Measuring block measuring table area mm 0 x olumn diameter mm ial gauge holder mm H H H Measuring table material Steel Steel Steel latness µm... ust grooves Weight kg approx. 0.0 approx. 0.0 approx. 0.0 Subject to technical modifications

6 xtra-sturdy comparator stands MT 0 The comparator stands in the MT 0 series are distinguished by a large measurement surface. They were designed for high accuracy in spite of their rugged construction. The measuring table plate rests on an adjustable three-point support. MT 0 SOGG The models MT 0b and MT 0 U-0b have a sliding horizontal measuring arm that can reach every point of the measurement surface. The horizontal measuring arm of models MT 0b and MT 0 U-0b can also be supplied with a rotation lock for special requirements. MT 0 SOGGG Model MT 0 SOGG MT 0 SOGL MT 0 SMGG MT 0 SMGL MT 0 SOGGG Total height mm Measuring range vertical mm Reach mm MT 0 SOGGL Measuring table area x mm 0 x 0 x 0 x 0 x 0 x 0 x Precision-ground table surface Lapped table surface olumn diameter mm Smooth column olumn with thread and setting ring olumn with hand wheel for vertical adjustment ial gauge holder mm H H H H H H Measuring table material Steel Steel Steel Steel Steel Steel latness µm ust grooves Weight kg approx. approx. approx. approx. approx. approx. ial gauges are not included.

7 enennung rtikel-nr. xtra-sturdy comparator stands MT 0 MT 0b SMGG MT 0U 0b-GS The dial gauge holders of the MT 0b types are interchangeable. Holders are available with 0H, H, H and 0H holes. dapters for commonly used electronic lengthmeasuring probes are available. llgemeintoleranzen Kom.Nr. Maßstab : / (:) Position Menge IN ISO -m maederpressen GmbH orm- und Lagetoleranzen Kd.Nr. Robert-oschstr. IN ISO -H Neuhausen MT 0 b MT 0 b MT 0 b MT 0 b MT 0 U MT 0 U atum Name MT 0 U earb..0.0 insterle MT 0 b Gepr. Model SOGG SOGL SMGG SMGL 0b-GS 0b-GL Modell.0.0 insterle0b-gsv iese Zeichnung darf ohne unsere Zeichnungsnummer latt Genehmigung weder vervielfältigt, noch d r i t t e n P e r s o n e n zugeleitet werden. ( des Unl.WG.,..0) enz-0000z Total height mm Zust. Änderungen 0 atum Name Ursprung rsatz 0 für rsetzt durch 0 Measuring range vertical mm Reach up to mm MT 0 U 0b-GLV Measuring table area x mm 0 x 0 x 0 x 0 x 0 x 0 x 0 x 0 x Precision-ground table surface Lapped table surface olumn diameter mm Smooth column olumn with thread and setting ring Horizontal measuring arm with rotation lock (option) ial gauge holder mm H H H H H H H H Interchangeable dial gauge holder Measuring table material Steel Steel Steel Steel Steel Steel Steel Steel latness µm ust grooves Weight kg approx. approx. approx. approx. approx. approx. approx. approx. Subject to technical modifications

8 omparator stands with long reach MT The measuring tables in the MT series are distinguished by their long reach, sturdy column and large measurement surface. nother advantage is their low weight. The measuring table plate rests on an adjustable three-point support. MT - MT H The MT b models have a sliding horizontal measuring arm that can reach every point of the measurement surface. The horizontal measuring arm can also be equipped with a rotation lock. The dial gauge holder is interchangeable. Mounting holes for commonly used length measuring probes are available. Model MT - MT - MT -G MT -G MT -H MT -H Total height mm Measuring range vertical mm Reach mm Measuring table area x mm x x x x x x Precision-ground table surface Lapped table surface olumn diameter mm Smooth column olumn with thread and setting ring olumn with hand wheel for vertical adjustment ial gauge holder mm H H H H H H Interchangeable dial gauge holder Measuring table material Steel Steel Steel Steel Steel Steel latness µm... ust grooves Weight kg approx. approx. approx. approx. approx. approx. ial gauges are not included.

9 enennung rtikel-nr. iese Zeichnung darf ohne unsere Zeichnungsnummer Genehmigung weder vervielfältigt, noch d r i t t e n P e r s o n e n zugeleitet werden. ( des Unl.WG.,..0) Robert-oschstr. Neuhausen omparator stands with long reach MT MT b- MT b-g Model MT b- MT b- atum Name earb..0.0 insterle MT 0 b Gepr. MT b-g Modell.0.0 insterle MT b-g llgemeintoleranzen IN ISO -m orm- und Lagetoleranzen IN ISO -H Kom.Nr. Maßstab Kd.Nr. : / (:) Position Menge maederpressen GmbH enz-0000z Zust. Änderungen atum Name Ursprung rsatz für rsetzt durch Total height mm Measuring range vertical mm Reach up to mm Measuring table area x mm x x x x Precision-ground table surface Lapped table surface olumn diameter mm Smooth column olumn with thread and setting ring ial gauge holder mm H H H H Interchangeable dial gauge holder Measuring table material Steel Steel Steel Steel latness µm.. ust grooves Weight kg approx. approx. approx. approx. latt Subject to technical modifications

10 omparator stands with granite base plate. MT 0 MT MT MT 00 These measuring tables have base plates made of natural black granite. ged over millions of years, the rock material is tension-free, wear-proof and harder than steel. The measurement surface is corrosion-free and non-magnetic. It requires no special care. MT 0-HG The surface is lapped and the flatness of the measurement surface conforms to IN /00. The columns are hard chrome-plated and ground. In models MT 0 b-hg MT b-hg MT 00 b-hg MT 00 b-hgv the dial gauge holder is interchangeable. MT -HG MT b-hg Holders with 0H, H, H and 0H holes are available. dapters for commonly used electronic length measuring probes are available. Model MT 0-HG MT 0 b-hg MT -HG MT b-hg MT -HG MT 00 b-hg MT 00 b-hgv Total height mm Measuring range vertical mm Reach mm Reach up to mm Table dimensions x mm 0 x 0 x 0 x 0 x 0 x 00 x 0 00 x 0 Measurement surface x G mm 00 x 00 x 00 x 00 x 00 x 00 x 0 00 x 0 olumn diameter mm 0 0 Smooth column olumn with thread and setting ring olumn with hand wheel for vertical adjustment Horizontal measuring arm with rotation lock on request on request ial gauge holder mm H H H H H H H Interchangeable dial gauge holder Measuring table material Granite Granite Granite Granite Granite Granite Granite latness of measurement surface as per IN Weight kg approx.. approx..0 approx.. approx.. approx.. approx..0 approx..0 ial gauges are not included.

11 enennung rtikel-nr. iese Zeichnung darf ohne unsere Zeichnungsnummer Genehmigung weder vervielfältigt, noch d r i t t e n P e r s o n e n zugeleitet werden. ( des Unl.WG.,..0) Robert-oschstr. Neuhausen omparator stands with a granite base plate MT 0 MT MT MT 00 MT -HG MT 00 b-hg llgemeintoleranzen IN ISO -m orm- und Lagetoleranzen IN ISO -H Kom.Nr. Kd.Nr. atum Name earb..0.0 insterle Gepr. Maßstab : / (:) Position Menge maederpressen GmbH MT 0 b Modell.0.0 insterle Zust. Änderungen atum Name Ursprung enz-0000z rsatz für rsetzt durch latt Subject to technical modifications

12 ial gauge stands The dial gauge stand MS 0b is distinguished by its long reach. It is used mainly for setting up measuring equipment. It can be attached either using a T-slot block or by bolting the flange directly onto the base plate. MS 0b The dial gauge holders are interchangeable. Holders can be supplied with 0H, H, H and 0H holes. dapters for commonly used length measuring probes are available. The horizontal measuring arm can also be supplied with a rotation lock. The columns and the adjustable horizontal measuring arm of the models MS 0b are hard chrome plated. Model MS 0b MS 0b-V MS 0-HG MS -HG MS b-hg MS -HG Total height mm Measuring range vertical mm Reach mm 0 0 olumn diameter mm 0 0 ial gauge holder mm H H H H H H Interchangeable dial gauge holder Rotation lock for horizontal measuring arm lange dia. mm Weight kg approx.. approx.. approx.. approx.. approx.. approx.. 0 ial gauges are not included.

13 ial gauge stands The bottom faces of the type MS 0 to MS dial gauge stands are surface-ground and have an M thread for mounting. The stands are therefore easy to mount on measuring plates, measuring equipment and granite base plates. MS 0-HG MS -HG Model MS b-hg The dial gauge holder is interchangeable. The horizontal measuring arm can also be supplied with a rotation lock. MS b-hg MS -HG Subject to technical modifications

14 Magnetic dial gauge stands M-P 0 M-P 0 M ST M-P Model M-P 0 M-P 0 M-P M ST Total height mm iameter of column and cross arm mm Reach mm 0 0 Magnet area mm dia. 0 dia. dia. 0 x 0 Magnet strength N 0 0 ial gauge holder mm H H H H ine adjustment of dial gauge arm Weight kg approx. 0. approx. 0. approx..0 approx.. ial gauges are not included.

15 ial gauge stands with sectional base Swivel heads for dial gauge stands UM-00 Swivel heads for dial gauge stands The GK swivel head turns by 0 on all axes, allowing one to make stands, linkage mountings and other devices. Hole diameters are provided in pairs as standard. However, it is also possible to combine holes of different diameters. MSV 0 V-block in base Model UM 00 MSV 0 GK GK GK Measuring height mm 00 0 iameter of column and cross arm mm Hole dia. mm H x H H x H H x H Reach mm imensions of base mm 0 x x 0 0 x x 0 ial gauge holder mm H H ine adjustment of dial gauge arm Weight kg approx.. approx..0 approx. 0. approx. 0. approx. 0. Subject to technical modifications

16 Tolerances latness of measuring table plates work-holding tables. ll of the measuring table plates listed are lapped. Plates designated as ground are precision-ground. Model Measuring table dimensions mm Material Precision as per IN Tolerance µm MT dia. Steel 0.0 MT 0 dia. 0 Steel 0. MT 0 K dia. 0. eramic actory standard.0 MT 0 0 x 0 Steel 0. MT 0 ground 0 x 0 Steel actory standard.0 MT 0 bk x eramic actory standard.0 MT 0 K x eramic actory standard.0 MT - x 0 Steel 0. MT x Steel 0. MT bk 0 x eramic 0.0 MT K 0 x eramic 0.0 MT U- dia. Steel 0. MT U- x Steel 0. MT U-K 0 x eramic 0.0 MT U- 0 x 0 Steel 0. MT 0 0 x Steel 0. MT 0 ground 0 x Steel actory standard.0 MT 0 x 00 Granite 00.0 MT x 00 Granite 00.0 MT x 00 Granite 00.0 MT x Steel 0. MT ground x Steel actory standard.0 MT x 00 Granite 00. RP 0-00 T 00 ast iron.0 RP 0-0 T 0 ast iron. RP -00 T 00 ast iron.0 RP -0 T 0 ast iron. RP 0 T 00 ast iron. RP T 00 ast iron. RP 00 T 0 Granite.0 Run-out accuracy tolerances of collets. The run-out accuracy is measured using a measuring pin at a distance L from the collet. Holes from to L Standard collet µm Ultra-precision collet µm