ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/ Reaffirmation ANSI APPROVED 02/28/ Reaffirmation ANSI APPROVED 05/06/2013

Size: px
Start display at page:

Download "ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013"

Transcription

1 STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME B5.1M-1985 (R2009) T-slots, Their Bolts, Nuts, and Tongues B5 SC Reaffirmation ANSI APPROVED 04/11/2014 Reaffirmed: 07/28/2009, 03/05/2004, 08/18/1998 ASME B (R2011) Chuck and Chuck Jaws ASME B (R2009) Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes and Automatic Lathes ASME B (R2013) Machine Tapers ASME B (R2013) Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads ASME B (R2009) Spindle Noses and Tool Shanks for Milling Machines ASME B (R2013) Machine Mounting Specifications for Abrasive Discs and Plate Mounted Wheels ASME B (R2013) Spindle Noses and Tool Shanks for Horizontal Boring Machines 11 Reaffirmation ANSI APPROVED 08/17/2011 ANSI APPROVED 02/28/2014 ANSI APPROVED 02/28/2014 ANSI Approved 05/06/2013 Reaffirmed: 05/23/2006 Reaffirmed: 07/28/2009, 03/05/2004, 08/18/1998 Reaffirmed: 07/28/2009, 03/05/2004, 01/30/1998 Reaffirmed: 04/18/2008, 06/26/2002 ASME B (R2013) Milling Machine Arbor Assemblies B5 SC Reaffirmation ASME B (R2013) Ball Screws 43 Reaffirmation

2 ASME B /24 Taper Tool to Spindle Connection for Automatic Tool Change ASME B (R2009) Power Presses: General Purpose, Single-Point Gap Type ASME B (R2010) Methods for Performance Evaluation of Computer Numerically Controlled Machining Centers ASME B5.55M-1994 (R2013) Specification and Performance Standard, Power Press Brakes ASME B5.56M-1994 (R2009) Specification and Performance Standard, Power Shears ASME B Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers ASME B5.59.1M Information Technology for Machine Tools Part 1 Data Specification for Machine Tool Performance Tests 45 Date of Issuance: 09/30/2015; ANSI Approved: 05/21/2015; 30 Reaffirmation ANSI APPROVED 04/08/ Reaffirmation ANSI APPROVED 06/09/ Reaffirmation 30 Reaffirmation ANSI APPROVED 04/17/ Publication Date: 05/03/2013 ANSI APPROVED 11/30/ PINS #116 for new Document Submitted on 10/12/2004 Previous Edition(s): Publication Date: 12/11/2009 ANSI APPROVED: 03/31/2009 Reaffirmed: 03/31/2009 Document ANSI Approved: 01/12/2005 Reaffirmed: 03/31/2009, 06/26/2002 Previous Editions: 1998 ASME B5.59.2M Information Technology for Machine Tools Part 2 Data Specification for Properties of Machine Tools for Milling and Turning 56 PINS #117 for new Document Submitted on 10/12/2004 Document to be submitted for balloting by the TC 56 and B5 Standards Committee by the end of ASME B Workholding Chucks 11 Date of Issuance: 02/06/2015; ANSI Approved: 09/15/2014; Combine 5 Small Parts into one Standard (parts 1 and 4) Addenda a published Dec Date of Issuance: 09/16/2002

3 ASME B (R2009) Power Presses: General Purpose, Single Action Straight Side Type ASME B5.62 Hollow Taper Tooling with Flange-Face Contact 30 Reaffirmation ANSI APPROVED 04/08/ Revision approved by TC and Standards Committee under Ballot #14-87RC1 and approved. This document is pending resolution of comments by the TC. Ballot Closed: 10/21/2014 Reaffirmed: 03/31/2009 Publication Date: 12/15/2004 ANSI APPROVED 07/07/2003 ASME B5.63 Tool and Socket Connections Gauging ASME B5.64 Methods for the Performance Evaluation of Single-Axis Positioning Systems ASME B (R2010) Reamers ASME B (R2009) Knurling ASME B (R2010) Hobs ASME B94.11M-1993 Twist Drills ASME B (R2009) Milling Cutters and End Mills ASME B (R2009) Gear Shaper Cutters PINS #330 for new Document Submitted on 06/29/2009 (Record # ) 54 PINS #335 for new Document Submitted on 08/11/2009 (Record # ) 52 PINS #577 for new Document Submitted on 10/26/2015 (Record # ) ANSI APPROVED 03/30/2015 ANSI APPROVED 04/15/2014 ANSI APPROVED 03/30/ PINS #474 for new Document Submitted on 11/30/2012 (Record # ) Withdrawn by ANSI Available as an ASME document ANSI APPROVED 04/11/2014 ANSI APPROVED 04/11/2014 Reaffirmed: 06/24/2010, 12/22/2005 Reaffirmed: 07/22/2009, 07/23/2003 Reaffirmed: 08/04/2010, 12/22/2005 Reaffirmed: 08/19/2009, 07/23/2003 Reaffirmed: 07/28/2009, 07/23/2003

4 ASME B Steel Rotary Slitting Knives and Steel Spacing Collars ASME B (R2010) Jig Bushings ASME B (R2010) Jig Bushings (Metric) ASME B (R2010) Drill Drivers, Split-Sleeve, Collet Type ASME B94.37M-1979 Roller Turner Type Cutting Tools Single Point ASME B (R2010) Spade Drill Blades and Spade Drill Holders ASME B94.51M-1999 (R2010) Specifications for Band Saw Blades (Metal Cutting) ASME B94.52M-1999 (R2010) Specifications for Hack Saw Blades ASME B Solid Steel Rectangular Metal Cutting Squaring Shear Knives Dimensional Tolerances ASME B (R2010) Specifications for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories 94 Withdrawn by ANSI Available as an ASME Document ANSI APPROVED 03/30/2015 ANSI APPROVED 03/27/2015 ANSI APPROVED 03/27/ Withdrawn by ANSI Available as an ASME Document 94 PINS #473 for Revision Issued on 11/20/2012 (Record # ) ANSI APPROVED 06/09/2015 ANSI APPROVED 06/09/ Withdrawn by ANSI Available as an ASME Document ANSI APPROVED 06/09/2015 Reaffirmed: 2001 Reaffirmed: 06/24/2010, 02/07/2005 Previous Editions: 1974 (R1994) Reaffirmed: 08/04/2010, 02/07/2005 Document ANSI Approved: 09/22/1997 Reaffirmed: 08/03/2010, 02/07/2005 Reaffirmed: 1985 Reaffirmed: 08/03/2010, 03/11/2005 Reaffirmed: 12/22/2005 Document ANSI Approved: 04/14/1999 Previous Editions: 1984, 1994 Reaffirmed: 12/22/2005 Document ANSI Approved: 04/14/1999 Previous Editions: 1994 Reaffirmed: 1984 Reaffirmed: 12/22/2005 Previous Editions: 1984, 1994

5 ASME B94.55M-1985 (R2009) Tool Life Testing with Single-Point Turning Tools ANSI APPROVED 04/11/2014 Reaffirmed: 07/28/2009, 07/23/2003

6 LIST OF WITHDRAWN/TRANSFERRED STANDARDS ASME B Rotating Air Cylinders and Adapters ASME B Involute Splines, Serrations and Inspection ASME B Accuracy of Engine and Tool Room Lathes ASME B Punch and Die Sets ASME B.25M-1980 Punch and Die Sets (Metric) ASME B Involute Serrations ASME B Mounting Dimensions of Lubricating and Coolant Pumps for Machine Tools ASME B Involute Spline and Serration Gages and Gaging ASME B Grinding Machines, Surface, Reciprocating Table Horizontal Spindle ASME B Grinding Machines, Surface, Reciprocating Table Vertical Spindle ASME B External Cylindrical Grinding Machines Plain Incorporated into ANSI B92.1, Involute Splines and Inspection Withdrawal Date: 12/06/2006 Withdrawal Date: 12/06/2006 Incorporated into ANSI B92.1, Involute Splines and Inspection Withdrawal Date: 06/2002 Incorporated into ANSI B92.1, Involute Splines and Inspection

7 ASME B External Cylindrical Grinding Machines Centerless ASME B External Cylindrical Grinding Machines Universal ASME B Modular Machine Tool Standards ASME B5.43M-1979 Modular Machine Tool Standards ASME B Rotary Table Surface Grinding Machines ASME B Milling Machines ASME B Symbols for Machine Tool Indicator Plates ASME B Glossary of Power Press Terms ASME B Preferred SI Units for Machine Tools ASME B5.53M-1982 Cutter and Tool Grinding Machines ASME B Straight Cut-Off Blades for Lathes and Screw Machines ASME B Inserted Blade Milling Cutter Bodies ASME B Taps Ground and Cut Threads ASME B Punches Basic Head Type ASME B Punches Basic Head Type (Metric) Withdrawal Date: 07/2003 Withdrawal Date: 08/11/2003 Withdrawal Date: 04/14/2008 Withdrawal Date: 12/04/2008 Withdrawal Date: 06/26/2002 Withdrawal Date: 08/25/2003 Withdrawal Date: 08/25/2003 Transferred to the B1 Standards Committee

8 ASME B Retainers Basic Ball-Lock, Punch and Die Button, Light and Heavy Duty ASME B Retainers Basic Ball-Lock, Punch and Die Button, Light and Heavy Duty (Metric) ASME B Gages Functional, Ball-Lock Punches, Die Buttons and Retainers ASME B Gages Functional, Ball-Lock Punches, Die Buttons and Retainers (Metric) ASME B Punches Basic Ball-Lock, Light and Heavy Duty ASME B Punches Variable Head Type (Metric) ASME B Punch Guide Bearings- Variable, Press Fit ASME B Die Buttons Basic Taper Relief, Press Fit ASME B M-1983 Die Buttons Basic Taper Relief, Press Fit (Metric) ASME B Die Buttons Basic Straight Relief, Press Fit ASME B M-1984 Die Buttons Basic Straight Relief, Press Fit (Metric) ASME B Die Buttons Basic Ball-Lock

9 ASME B Die Buttons Basic Ball-Lock (Metric) ASME B Die Buttons Variable, Press Fit ASME B Punches Basic, Combination Angle Head Type and Related Quill Bushings ASME B Punches Wire Type ASME B Punches Basic, Angle Head Type and Related Quill Bushings ASME B Die Buttons Variable, Press Fit, Headless and Head Type, Step Relief ASME B Punches Basic, Cylindrical Head Type and Related Quill Bushings ASME B Basic Nomenclature and Definitions for Single- Point Cutting Tools ASME B Gages Functional, Ball-Lock Punches (Inch) ASME B M-1995 Gages Functional, Ball-Lock Punches (Metric) Withdrawal Date: 03/31/2009

UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS

UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars

More information

MACHINING OPERATIONS AND MACHINE TOOLS

MACHINING OPERATIONS AND MACHINE TOOLS MACHINING OPERATIONS AND MACHINE TOOLS 1. Turning and Related Operations 2. Drilling and Related Operations 3. Milling 4. Machining & Turning Centers 5. Other Machining Operations 6. Shape, Tolerance and

More information

YUASA MILLING MACHINE ACCESSORIES & TOOLS

YUASA MILLING MACHINE ACCESSORIES & TOOLS 97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage

More information

Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö

Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors

More information

COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES

COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,

More information

Lathe Milling Attachment

Lathe Milling Attachment Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,

More information

Common Mechanical Engineering Terms

Common Mechanical Engineering Terms Common Mechanical Engineering Terms Ball and Detent (n) A simple mechanical arrangement used to hold a moving part in a temporarily fixed position relative to another part. The ball slides within a bored

More information

ACCURACY PRATT & WHITNEY PRODUCTS OF 1930

ACCURACY PRATT & WHITNEY PRODUCTS OF 1930 ACCURACY PRATT & WHITNEY PRODUCTS OF PRATT & WHITNEY MACHINE TOOLS, SMALL TOOLS AND GAGES OF M ODERN Pratt & Whitney tools are made to the same high standards of craftsmanship which our founders established,

More information

The Bonelle Tool and Cutter Grinder

The Bonelle Tool and Cutter Grinder The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently

More information

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. 1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

L I V E T O O L F O R O K U M A

L I V E T O O L F O R O K U M A L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,

More information

Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw

Home > ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche

More information

Milling Milling milling cutter milling machines 1

Milling Milling milling cutter milling machines 1 Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece as it is fed to a rotating cutter in a direction perpendicular to the

More information

Driven Toolholders for SAUTER Turrets

Driven Toolholders for SAUTER Turrets Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets

More information

CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING

CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING APPRENTICE CORE COMPETENCIES 1. Identify and Demonstrate Usage of Machine Safety and Personal Protective Equipment

More information

Static and Driven Tools LB and LT Series

Static and Driven Tools LB and LT Series Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide

More information

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing

More information

Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö

Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

Fixturing systems Fixturing systems for measurement technology

Fixturing systems Fixturing systems for measurement technology Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

HONING LATHE DUPLICATOR CUTTERS

HONING LATHE DUPLICATOR CUTTERS Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the

More information

MACHINE TOOLS LAB MANUAL

MACHINE TOOLS LAB MANUAL MACHINE TOOLS LAB MANUAL 3 RD YEAR B.TECH I-SEMESTER MECHANICAL ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING MALLAREDDY COLLEGE OF ENGINEERING & TECHNOLOGY SECUNDERABAD 14. A.P. INDEX 1. Nomenclature

More information

Slide the new steering column shaft through the steering column from the driver compartment.

Slide the new steering column shaft through the steering column from the driver compartment. Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.

More information

MILLING OPERATIONS TYPES OF MILLING MACHINES

MILLING OPERATIONS TYPES OF MILLING MACHINES Chapter 8 MILLING OPERATIONS Milling is the process of machining flat, curved, or irregular surfaces by feeding the workpiece against a rotating cutter containing a number of cutting edges. The milling

More information

Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop

Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a

Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a rotating cutter or endmill which rotates about the spindle

More information

UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary

More information

Specifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed)

Specifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed) Specifications for a Precision CNC Vertical Machining Center Introduction The Naval Research Laboratory Vacuum Electronics Branch requires a high precision computer numerically controlled (CNC) vertical

More information

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400

More information

DRILLING MACHINES GENERAL INFORMATION

DRILLING MACHINES GENERAL INFORMATION Chapter 4 DRILLING MACHINES GENERAL INFORMATION PURPOSE This chapter contains basic information pertaining to drilling machines. A drilling machine comes in many shapes and sizes, from small hand-held

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)

More information

TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS

TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

Milling and Machining Center Basics

Milling and Machining Center Basics Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will

More information

VDI Tool Holders. for Hardinge Machines. In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Other, call: 607-734-2281 Fax: 607-734-8819

VDI Tool Holders. for Hardinge Machines. In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Other, call: 607-734-2281 Fax: 607-734-8819 VI ool Holders for Hardinge Machines QUES 6/42, 8/51 and 10/65 CNC athes EIE 8/51 CNC athes HARINGE-EMAG V3/V5 Vertical CNC athes QUES WINURN 65 CNC urning Centers In USA, call: 800-843-8801 In Canada,

More information

GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING

GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING AND lubrication Check- and Measuring instruments for optimal tool clamping and lubrication Pre-requisite for perfect machining results

More information

Machine devices, jig devices

Machine devices, jig devices Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class

More information

Making Clock Wheel & Pinion Cutters

Making Clock Wheel & Pinion Cutters Making Clock Wheel & Pinion Cutters When making hand made clocks or in repair work an odd size cutter is sometimes needed. Sometimes just one pinion is required and does not justify the cost of a commercial

More information

INTRODUCTION. Dear Business Partners,

INTRODUCTION. Dear Business Partners, INTRODUCTION Dear Business Partners, We are proud to issue the new catalogue of STROJFERR s.r.o. which was established in 1997 as a genuinely Czech company. In its activities and production programme,

More information

Revised September 2013. Vincennes University. Indiana Center for Applied Technology (ICAT) - Haas Technical Education Center (HTEC) CNC Machinist Now

Revised September 2013. Vincennes University. Indiana Center for Applied Technology (ICAT) - Haas Technical Education Center (HTEC) CNC Machinist Now Revised September 2013 Vincennes University Indiana Center for Applied Technology (ICAT) - Haas Technical Education Center (HTEC) CNC Machinist Now An Accelerated Training Program for Veterans and Civilians

More information

for MANUAL MILLING MACHINES

for MANUAL MILLING MACHINES UC RIVERSIDE MECHANICAL ENGINEERING DEPARTMENT MACHINE SHOP STANDARD OPERATING PROCEDURES for MANUAL MILLING MACHINES REVISION: V5 DATE: 11-15-2011 TABLE OF CONTENTS SECTION TOPIC(S) PAGE Basic Capabilities

More information

TL-Series Sub-Spindle Operator s Addendum

TL-Series Sub-Spindle Operator s Addendum 3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are

More information

6.6 GEAR MANUFACTURING. Introduction. Gear forming

6.6 GEAR MANUFACTURING. Introduction. Gear forming Valery Marinov, Manufacturing Technology Gear Manufacturing 123 6.6 GEAR MANUFACTURING Introduction Because of their capability for transmitting motion and power, gears are among the most important of

More information

MACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)

MACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04) MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer

More information

METAL-TURNING LATHE Built from Stock Parts

METAL-TURNING LATHE Built from Stock Parts by Frank Beatty USING STANDARD PARTS and stock materials that are available almost anywhere, you can build this metalworking lathe with only a few tools. Because of simplification of the assembly in order

More information

SUBCOURSE EDITION OD1645 8 LATHE OPERATIONS

SUBCOURSE EDITION OD1645 8 LATHE OPERATIONS SUBCOURSE EDITION OD1645 8 LATHE OPERATIONS US ARMY REPAIR SHOP TECHNICIAN WARRANT OFFICER ADVANCED CORRESPONDENCE COURSE MOS/SKILL LEVEL: 441A LATHE OPERATIONS SUBCOURSE NO. OD1645 EDITION 8 US Army

More information

413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX

413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX 413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:

More information

CHAPTER 82. Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal

CHAPTER 82. Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal NOTES : CHAPTER 82 Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure or pedicure

More information

Providing Answers For All Your Machine Tool Needs

Providing Answers For All Your Machine Tool Needs Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION

More information

KOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement.

KOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement. KOMET Adaptors Perfecting the Connection With our comprehension programme of tool s we have the right answer for every requirement. Adaptors with connections specified by manufacturers available on request.

More information

SAMPLE TEST PAPER - I

SAMPLE TEST PAPER - I SCHEME E SAMPLE TEST PAPER - I Course Name : Mechanical Engineering Group Course Code : AE/PG/PT/ME/MH/FE Semester : Third Subject : Mechanical Engineering Drawing 12042 Time : 90 Minutes Marks: 25 Instruction:

More information

Front axle components, overview

Front axle components, overview just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,

More information

Dismantling and Reassembly Guide

Dismantling and Reassembly Guide Super X3 Mill Dismantling and Reassembly Guide A picture story book to help you dismantle and reassemble your Sieg Super X3 Mill Arc Euro Trade Ltd. 10 Archdale Street, Syston, Leicester, LE7 1NA. Web:

More information

FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R

FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP Designated Trade: Level 1 2 3 4 Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK under the appropriate

More information

Phone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com

Phone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com 1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine Holders...7

More information

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy

More information

SHOP NOTES METAL SHAPER FOR YOUR SHOP

SHOP NOTES METAL SHAPER FOR YOUR SHOP SHOP NOTES METAL SHAPER FOR YOUR SHOP A METAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,

More information

Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center

Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale

More information

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997 Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

More information

Product Guide SaraDrill

Product Guide SaraDrill Product Guide SaraDrill SARADRILL / A QUICK GUIDE Drilling from solid - a proven technology to drill large diameter holes on low horse power machines. Drilling from 49mm to 270mm diameter holes from solid

More information

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev. Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical

More information

RAPID DIAL TEST INDICATORS

RAPID DIAL TEST INDICATORS RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot

More information

FAG Hydraulic nuts. Technical Product Information

FAG Hydraulic nuts. Technical Product Information FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables

More information

This last dimension, the thread pitch diameter, is the most important as it is a reference from which all other thread measurements originate

This last dimension, the thread pitch diameter, is the most important as it is a reference from which all other thread measurements originate Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the design and use of various thread types and how they are produced.

More information

Rating when used as a weight carrying hitch without spring bars:

Rating when used as a weight carrying hitch without spring bars: BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.

More information

HOBBING MACHINE TYPE ZFWZ 8000x40

HOBBING MACHINE TYPE ZFWZ 8000x40 Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth

More information

20000068 WIRELESS REMOTE ASSEMBLY, 24VDC, 1 TRANS,1 REC

20000068 WIRELESS REMOTE ASSEMBLY, 24VDC, 1 TRANS,1 REC 20000068 WIRELESS REMOTE ASSEMBLY, 24VDC, 1 TRANS,1 REC Fitment to MP-25 620 CR 4841, Haslet, TX 76052 Ph 817.439.1108 Fax 817.636.5675 www.machine-technologies.com Kit contents 1 Transmitter 2 button,

More information

Cutting and Shearing die design Cutting die design

Cutting and Shearing die design Cutting die design Manufacturing Processes 2 Dr. Alaa Hasan Ali Cutting and Shearing die design Cutting die design A stamping die is a special, one-of-a-kind precision tool that cuts and forms sheet metal into a desired

More information

EQUIPMENT LIST. CNC MACHINING CENTERS (12 Machining Centers)

EQUIPMENT LIST. CNC MACHINING CENTERS (12 Machining Centers) EQUIPMENT LIST CNC MACHINING CENTERS (12 Machining Centers) 5: Mazak V-414/32 with M-32 CNC control and integral two pallet flexible manufacturing module.this state of the art machining center along with

More information

Technical Product Specification (TPS)

Technical Product Specification (TPS) ISO Standards collection Technical Product Specification (TPS) Contents ISO 1:2002 Geometrical Product Specifications (GPS) -- Standard reference temperature for geometrical product specification and verification

More information

CNC HARDWARE & TOOLING BASICS

CNC HARDWARE & TOOLING BASICS Computer Aided Manufacturing (CAM) CNC HARDWARE & TOOLING BASICS Assoc. Prof. Dr. Tamer S. Mahmoud 1. Parts of CNC Machine Tools Any CNC machine tool essentially consists of the following parts: Part Program,

More information

TOOL CLAMPING SYSTEMS

TOOL CLAMPING SYSTEMS TOOL CLAMPING SYSTEMS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths

More information

PARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS

PARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration

More information

Pump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford

Pump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford Pump Skid Fabrication for Magnetic Coupling Rick Soltis Chief Mechanic City of Bedford Contents Magnetic Couplings What They Are, How They Work, Where They re Used Fabrication and Manufacturing of Pump

More information

Introduction to JIGS AND FIXTURES

Introduction to JIGS AND FIXTURES Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production

More information

It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool

It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend

More information

Resharpening Companion

Resharpening Companion Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace

More information

Where to order engine kits The displacer cylinder CONTINUED

Where to order engine kits The displacer cylinder CONTINUED By Harry Walton OCUS sunlight on this model engine, and it runs at full speed, fueled by Fthe biggest nuclear reactor in the solar system the sun. Power is ample to drive a midget water pump or spin a

More information

Chapter 9 MILLING-GRINDING-DRILLING AND SLOTTING ATTACHMENT (VERSA-M I L)

Chapter 9 MILLING-GRINDING-DRILLING AND SLOTTING ATTACHMENT (VERSA-M I L) Chapter 9 MILLING-GRINDING-DRILLING AND SLOTTING ATTACHMENT (VERSA-M I L) GENERAL DESCRIPTION The milling-grinding-drilling and slotting attachment is commonly referred to as a Versa- Mil. It is a compact,

More information

Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced Mills

Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced Mills 1 of 6 9/9/2014 3:59 PM I. Catalog Information Credit- Degree applicable Effective Quarter: Fall 2014 MCNC 75B Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced

More information

Advantages and application of PCD and CBn tools

Advantages and application of PCD and CBn tools PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.

More information

Atelier STCG, Inc. Atelier STCG Inc. SBA. Tooling and Machine Shop Equipment. Ended Feb 26, 2015 4:36pm EST. Description

Atelier STCG, Inc. Atelier STCG Inc. SBA. Tooling and Machine Shop Equipment. Ended Feb 26, 2015 4:36pm EST. Description Atelier STCG, Inc. Atelier STCG Inc. SBA Tooling and Machine Shop Equipment 14230 Boulevard Cure Labelle St-Janvier Mirabel Quebec J7J 1B1 Canada Ended Feb 26, 2015 4:36pm EST Lot Description 1 Lot of

More information

Machine tools. Milling- and boring machines

Machine tools. Milling- and boring machines Milling- and boring machines Milling- and boring machines Our family owned company develops and manufactures customized machines and designs machine tools based on work piece requirements successfully

More information

2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13)

2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13) 2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13) Exploded View Special Tools Required Ball joint remover, 28 mm 07MAC-SL0A202 Hub dis/assembly tool 07GAF-SD40100 Bearing driver attachment,

More information

Queensborough Community College NSF Tech ASCEND

Queensborough Community College NSF Tech ASCEND Queensborough Community College NSF Tech ASCEND Computer Numerical Control (CNC) Component Student Manual Prepared by Prof. Joseph Goldenberg, MET&DD Department 2003 Edition Table of Contents Introduction

More information

The Speed of Live and the Accuracy of Fixed

The Speed of Live and the Accuracy of Fixed The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.

More information

STIH) STIHL NG 7. Gebrauchsanleitung. Instruction Manual Notice d emploi Instrucciones de servicio Istruzioni d uso Instruções de serviço Handleiding

STIH) STIHL NG 7. Gebrauchsanleitung. Instruction Manual Notice d emploi Instrucciones de servicio Istruzioni d uso Instruções de serviço Handleiding STIH) STIHL Gebrauchsanleitung Instruction Manual Notice d emploi Instrucciones de servicio Istruzioni d uso Instruções de serviço Handleiding Contents English Guide to Using this Manual BA_SE_098_002_0_02.fm

More information

Working Drawing and Assemblies. Chapter 10

Working Drawing and Assemblies. Chapter 10 Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.

More information

SC-32 CNC LATHE OPERATION MANUAL

SC-32 CNC LATHE OPERATION MANUAL SC-32 OPERATION MANUAL NCT Ipari Elektronikai Kft. 1 / 29 Dátum: 2013.09.27. CONTENTS 1. ACCURACY RECORD... 2 2. SAFETY PRECAUTIONS... 2 2.1. Safety Rules... 2 2.2. Warning label attaching positions...

More information

Rebuild Instructions for 70001 and 70010 Transmission

Rebuild Instructions for 70001 and 70010 Transmission Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before

More information

Sheet Metal Shearing & Bending

Sheet Metal Shearing & Bending Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal

More information

Milling Chuck Features

Milling Chuck Features Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings

More information

Maxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME

Maxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator

More information

Course outline. Know Your Machine From A Programmer s Viewpoint 11 If you ve had experience with conventional (non-cnc) machine tools 11

Course outline. Know Your Machine From A Programmer s Viewpoint 11 If you ve had experience with conventional (non-cnc) machine tools 11 Course outline Know Your Machine From A Programmer s Viewpoint 11 If you ve had experience with conventional (non-cnc) machine tools 11 Machine Configurations 13 Vertical machining centers 13 C-frame style

More information

MACHINE TOOLS. quakerchem.com info@quakerchem.com

MACHINE TOOLS. quakerchem.com info@quakerchem.com MACHINE TOOLS OVERVIEW DEFINITION Metal removal fluids (MRF) are used in machine tools to provide lubrication, cooling of the tooling and parts, and to provide chip removal to the filtration systems. What

More information