EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...
|
|
|
- Lindsey Morris
- 8 years ago
- Views:
Transcription
1 EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what we can do here in Gammertingen, Germany. As well as the resulting flexibility, this offers another very significant benefit for our customers: even if what you need is complicated, we can say yes to your request. For example, if you re needing to push the limits of manual measurement technology, you will benefit from our almost unlimited knowledge. Advise, test, solve: even if custom-made products are necessary, there is one thing you can always rely on: we can do it for you! Because with experience, expertise, team spirit and modern machinery, our professionals are there for you to serve your professional needs. Strictly speaking, this is all that high-quality portable measuring technology really needs, which is why this is exactly what we focus on.
2 5. KAPITEL SQUARES, PROTRACTORS AND BEVEL PROTRACTORS Squares with / without base Steel squares Squares with hard and slim blade Knife edge squares Pattern maker angle Inspection set Mitre / Acute angle and Centre squares Squares for specific measuring tasks and target groups Wooden cases Protractors Universal bevel protractors Protractor Pernumeter
3 0368 Squares with base accuracy grade 0 Accuracy grade 0 For exact angle testing (for example: tool making) From blade length 1000 mm in a transportation box Special steel 75 x x x x x x x x x x x x x x x x x x x x x x Stainless steel 75 x x x x x x x x x x x x x x x x x x x x x x , Squares without base accuracy grade 0 Accuracy grade 0 For exact angle testing (for example: tool making) From blade length 1000 mm in a transportation box Special steel 75 x x x x x x x x x x x x x x x x x x x x x x Stainless steel 75 x x x x x x x x x x x x x x x x x x x x x x , Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
4 0385 Inspection squares with base accuracy grade 0, hardened Accuracy grade 0 For exact angle testing (for example: tool making) Special steel Stainless steel 50 x x x x x x x x x x x x x x x x x x x x x x x x Inspection squares without base accuracy grade 0, hardened Accuracy grade 0 For exact angle testing (for example: tool making) Special steel Stainless steel 50 x x x x x x x x x x x x x x x x x x x x x x x x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 191
5 0370 Squares with base accuracy grade 1 Accuracy grade 1 For angle testing in production and factory From blade length 1000 mm in a transportation box Special steel 75 x x x x x x x x x x x x x x x x x x x x x x Stainless steel 75 x x x x x x x x x x x x x x x x x x x x x x Squares without base accuracy grade 1 Accuracy grade 1 For angle testing in production and factory From blade length 1000 mm in a transportation box Special steel 75 x x x x x x x x x x x x x x x x x x x x x x Stainless steel 75 x x x x x x x x x x x x x x x x x x x x x x Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
6 0372 Squares with base accuracy grade 2 Special steel Accuracy grade 2 For angle testing in factory and metal construction From blade length 1500 mm in a transportation box 75 x x x x x x x x x x x x x x x x x x x x x x x x x x Squares without base accuracy grade 2 Special steel Accuracy grade 2 For angle testing in factory and metal construction From blade length 1500 mm in a transportation box 75 x x x x x x x x x x x x x x x x x x x x x x x x x x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 193
7 0374 Steel squares with base Special steel, zinc coated Simple design for angle tests in steel and metal construction From blade length 1500 mm in a transportation box 100 x x x x x x x x x x x x x x x x x x x x x x * x x * *polished 0375 Steel squares without base Special steel, zinc coated Simple design for angle tests in steel and metal construction From blade length 1500 mm in a transportation box 100 x x x x x x x x x x x x x x x x x x x x x x * x x * *polished 194 Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
8 0376 Squares with hard and slim blade, accuracy grade 1 Special steel Accuracy grade 1 For angle testing in production and factory Blade length Hard blade Slim blade Ref. No. List price mm 75 x x x x x x x x x x x x Squares with hard and slim blade, accuracy grade 2 Special steel Accuracy grade 2 For angle tests in the workshop and metal construction 5 Blade length Hard blade Slim blade Ref. No. List price mm 75 x x x x x x x x x x x x x x x x x x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 195
9 0390 Squares with hard and slim blade, hardened, accuracy grade 0 Accuracy grade 0 For exact angle testing (for example: tool making) Special steel Stainless steel Blade length Hard blade Slim blade Ref. No. List price mm 50 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Knife edge squares with hard and slim blade, hardened, accuracy grade 00 With knife edge Accuracy grade 00 For exact flatness testing (for example: in production) Blade length Hard blade Slim blade Ref. No. List price mm Special steel, non-glare knife edge 50 x x x x x x x x x x x x x x x x x x Stainless steel 50 x x x x x x x x x x x x x x x x x x Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
10 0388 Knife edge squares, hardened, accuracy grade 00 Accuracy grade 00 For exact angle and flatness testing (for example: tool making) 0394 Pattern maker angle, adjustable Special steel, non-glare knife edge 50 x x x x x x x x x x x x Stainless steel 50 x x x x x x x x x x x x x x Reading parts are satin chrome finished Sliding knife edge 7 x 7 x 60 mm Handle 40 x 23 x 9 mm For tests at short grooves through the sliding straight edge Wooden case 5 Ref. No. List price Euro = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 197
11 0394 Pattern maker angle, adjustable, hardened Satin chrome finished reading parts Sliding knife edge rule: 7 x 7 x 100 mm, Angle adjustable up to ± 5 Handle 35 x 13 x 60 mm For testing on short edges and grooves through the sliding knife edge Wooden case Ref. No. List price Euro Replacement rule Ref. No. List price Euro Replacement rule for Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
12 0387 Knife edge squares, hardened, accuracy grade 00 Stainless steel Accuracy grade 00 Angle 90 Knife edge on the inside Blade length Hard blade Knife edge blade Ref. No. List price mm 25 x 20 6 x x x 28 8 x x Inspection square set Set consists of: Knife edge squares and Wooden case Ref. No. List price Euro Inspection square set piece inspection set Set consists of: Knife edge square, stainless steel 75 x 50 mm Knife edge square, stainless steel 40 x 28 mm Knife edge square, stainless steel 25 x 20 mm Knife edge rule, special steel 100 mm Gauge block scriber, 60 x 9 x 9 mm 5 Wooden case Ref. No. List price Euro = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 199
13 0395 Mitre squares 135 Special steel With base Flat, without base 120 x x x x x x x x x x x x x x x x x x Mitre squares 120 Special steel Flat, without base 50 x x x x x x Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
14 0395 Acute angle squares 60 Special steel With base Flat, without base 120 x x x x x x x x x x x x Acute angle squares 45 5 Special steel With base Flat, without base 120 x x x x x x x x x x x x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 201
15 0380 Centre squares Special steel With mm graduated scale Scale has a satin chrome finish For marking the centre of cylindrical workpieces, for example spindless, slices Bar x Blade length For shafts up to Ref. No. List price mm diameter Euro Special steel, chrome finished 100 x x x x x Special steel 400 x x Flange squares Special steel, zinc coated For accurately aligning flanges e.g. in plumbing and sanitary works in pipeline From blade length 600 mm individually packed 300 x x x x x x x x x x Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
16 0396 Carpenters squares Zinc coated spring steel Satin chrome finished For angle tests in wood construction With marking holes 600 x x x x x x x x Without marking holes 600 x x x x x x x x Alpha squares with marking holes 5 Stainless steel Long blade with mm graduation, short blade used as adjustable protractor For marking and production of wood joints x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 203
17 0396 Joiner squares with mitre Aluminium mm graduation Blade length Slim blade Hard blade Ref. No. List price mm 250 x x 5 40 x x x 5 40 x x x 5 40 x Adjustable squares Special steel, zinc coated Satin chrome finished Screw hinge For transferring, marking and setting of individual angles x x x x x Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
18 0003 Wooden cases for squares For squares with base For flat type squares Blade length Dimensions Ref. No. List price 50 x x 45 x x x 55 x x x 75 x x x 105 x x x 135 x x x 170 x x x 205 x x x 270 x x x 335 x x x 45 x x x 55 x x x 75 x x x 105 x x x 135 x x x 170 x x x 205 x x x 270 x x x 335 x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 205
19 0410 Protractors With rivetted hinge Special steel, satin chrome finished Graduated arc Pointer arm Ref. No. List price dia Protractors Locking screw High precision, laser graduated degree scale Graduated arc Pointer arm Ref. No. List price dia. Special steel Special steel, satin chrome finished graduated arc Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
20 0412 Protractors Locking screw Stainless steel High precision, laser graduated degree scale Graduated arc Pointer arm Ref. No. List price dia Protractors Locking screw Special steel High precision, laser graduated degree scale Graduated in opposite directions Satin chrome finished Semicircular head Rectangular head Dimensions Pointer arm Ref. No. List price Ø x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 207
21 0415 Bevel protractors Locking screw Special steel, pointer arm is satin chrome finished Adjustable stop bar High precision, laser graduated degree scale Graduated arc Pointer arm Ref. No. List price dia Bevel protractors with double stop rail Locking screw Special steel, pointer arm is satin chrome finished Adjustable stop bar High precision, laser graduated degree scale Two-way adjustable stop bar Graduated arc Pointer arm Ref. No. List price dia Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
22 0422 Universal bevel protractors with magnifying lense Locking screw Stainless steel Fine adjustment screw Parallax-free reading Reading parts are satin chrome finished Vernier scale reading 5 minutes Hardened beam Wooden case Segment Blade Ref. No. List price mm Euro 4 x x x x DIGI-MET Universal bevel protractors OPTO Clamping unit Stainless steel Electronic functions ON/OFF switch Zero setting at any position Reversible measuring range: - 1 x x x 90 Reversible indication - degree and minutes - decimal degree Data output: Opto RS 232 Wooden case Blade Reading Ref. No. List price mm Euro or 1' or or Accessories Ref. No. List price Euro Battery, 3V-Lithium, CR Cable for Opto to RS Cable for Opto to USB = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 209
23 Replacement blades for 0422 / 0425 Blade Ref. No. List price mm Euro Universal bevel protractors Locking screw Stainless steel Vernier scale reading 5 minutes Segment Blade Ref. No. List price mm Euro 4 x x x Accessories Ref. No. List price Euro Magnifying lense Angle stop Prismatic base Replacement blade 150 mm Replacement blade 200 mm Replacement blade 300 mm Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
24 0417 Protractor "Pernumeter" Made from plastic Vernier reading mm and 3 1/2'' graduation Locking screw Case Segment Reading Dia. of index Length of bases Ref. No. List price circle 2 x90 / 2 x 0-150% 1/ x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 211
NOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
1722 / 1723 / 1724 DIGI-MET Indicators
1722 / 172 / 1724 DIGI-MET Indicators for static measurements IP 52 1722 502 172 502 1724 502 Electronic functions Housing Ø 60 mm Replacement probe tip M 2.5 Protection class IP52 Clamping shank Ø 8 mm
Straightness, Angle and Inclination Measurement
www.tesagroup.com J-1 INCLINOMETERS AND PRECISION LEVELS Irrespective of whether they are spirit or electronic inclinometers, all precision levels are based on the same perfectly reliable reference but
DRAWING INSTRUMENTS AND THEIR USES
Chapter - A DRAWING INSTRUMENTS AND THEIR USES Drawing Instruments are used to prepare neat and accurate Drawings. To a greater extent, the accuracy of the Drawings depend on the quality of instruments
3 3.4 Measuring tapes Spirit levels Levelling and laser technology
0 Vernier callipers Depth gauges 1 Outside and inside micrometers 2 Dial gauges / callipers Vblocks, measuring tables Centring devices Page 526 540 Page 541 554 Page 555 577 Height gauges, scribers Engineers
Innovative measurement technology for real professionals.
New: the LAX 200 crossed line laser, the 300 and laser distance measurers Innovative measurement technology for real professionals. ACCURATE. TOUGH. RELIABLE. EASY-TO-USE. Three new measuring LAX 200/
Installation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
TOOLS FOR SELF RELIANCE REFURBISHING SHEET No 2. Registered Charity No 280437. Saws for Woodworking
Registered Charity No 280437 Saws for Woodworking Issued December 2002 Registered Charity No 280437 page no 1 SAW TYPES Rip saw For cutting along the grain Crosscut saw [A smaller version is known as a
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
Micro Precision Tools Your partner for precision applications
Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic
HP Laser Jet 4200/4240/4250/4300/4350 Swing Plate
HP Laser Jet 4200/4240/4250/4300/4350 Swing Plate 1 Swing Plate Assembly-RM1-0043 1 Swing Plate Kit-5851-2766 (RM1-0043 plus RM1-1091 gear) CAUTION: Fuser may be hot. Turn off printer, unplug it and allow
PORTABLE MICROSCOPES PORTABLE MICROSCOPES PORTABLE MICROSCOPES PORTABLE MICROSCOPES PORTABLE MICROSCOPES PORTABLE MICROSCOPES
British Made Portable Microscopes with Image Erection PCB Through - Hole Scope Depthscope Brinell Hardness Impression Microscope Cathode Ray Tube Inspector Portable Video Scope Metallurgical Microscope
Is your concept unique?
wirerodsystems STRUCTURAL structural residential landscape coercial retail Sta-Lok Terminals Ltd are one of the world s leading manufacturers of stainless steel fittings for wire ropes, rods & fabricated
The tablesaw may be your shop s most valuable cutting. Crosscut Sleds. Foolproof. Innovative approach guarantees perfect results
Foolproof Crosscut Sleds Innovative approach guarantees perfect results B Y A L A N T U R N E R The tablesaw may be your shop s most valuable cutting tool, but for precise, repeatable crosscuts it needs
Fixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
M A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
Speed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
OPERATING P L AYA B I L I T Y P R E C I S I O N D E S I G N
P L AYA B I L I T Y P R E C I S I O N P E R F O R M A N C E OPERATING INSTRUCTIONS FOR: GolfWorks Loft and Lie Gauges code: HGCG/DGCG/LOLI2 4820 Jacksontown Road P.O. Box 3008 Newark, Ohio 43058-3008 Toll-Free:
Go-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
COASTAL SERIES. 316 Solid Stainless Steel Door Furniture
COASTAL SERIES 316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES SOLID STAINLESS STEEL ROSE AND PLATE DOOR FURNITURE DORMA in Australia and New Zealand is developing into a leading manufacturer
HORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
Original Assembly Guide
TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this
HOW TO MAKE A MOTOR BRACKET
HOW TO MAKE A MOUNTING BRACKET FOR AN ELECTRIC MOTOR Often, brackets supplied with purchased items (e.g. electric motors or servos) are not ideally suited for fitting into our models or they are not supplied
Ref: GA13UK Glass Awning Support System
Ref: GA13UK Glass Awning Support System Give any entrance an uncomplicated, graceful look, enhancing the design of any building. Installation LAMINATED TOUGHENED GLASS High grade 316 stainless steel for
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
Practical Alignment Tools and Techniques
Practical Alignment Tools and Techniques Bruce Lehmann Sr. Engineer, Thin Kerf Technologies Inc Accurate sawing requires attention to proper alignment and maintenance. Alignment is critical to modem sawmills
MODEL T10023 ACCESSORY KIT #1 FOR T10010/T10097 WET GRINDER
MODEL T0023 ACCESSORY KIT # FOR T000/T0097 WET GRINDER INSTRUCTION SHEET Introduction The Model T0023 Accessory Kit # for the Model T000/T0097 Wet Grinder includes fixtures for sharpening small knives,
Series 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
OD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
HARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
YUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
Removable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
Slides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
majestic install ation guide barcelona three sided enclosure 24mm surface mounted wall channels and underframe to base
majestic install ation guide barcelona three sided enclosure 24mm surface mounted wall channels and underframe to base These Instructions are for a left and right handed unit. The diagrams show a left
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
Precision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: info@alaks.com.tr 1160F Aluminum Corner
Industrial magnetic products and tools
Industrial magnetic products and tools M Products and tools for industrial applications akker Magnetics, established in 1971, is a leading producer of magnetic products and industrial systems based on
AZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail
DIGI-MET ELECTRONIC INDICATORS
DIGI-MET ELECTRONIC INDICATORS Featuring Direct RS232C Output And Swiss SYLVAC Electronics. A sophisticated non-contact linear measuring system... can be connected to any computer or printer with no interface
ROUNDO 3-Roll Plate Bending Machines Type PS
ROUNDO 3-Roll Plate Bending Machines Type PS Universal Machine used for all Plate Bending Double Pinch Design 1. Align the plate using the alignment grooves in the lower rolls or against the rear roll.
RadianceRail Installation Guide
RadianceRail Installation Guide Installing RadianceRail with CableRail by Feeney... 2 Installing CableRail by Feeney for RadianceRail... 7 Installing RadianceRail Stairs with CableRail by Feeney... 10
Sheet Metal Shearing & Bending
Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal
HVAC/R GAS TEST GAUGES SPECIFICATIONS ACCURACY CASE SIZES CASE MATERIAL MOUNTING STYLE HOUSING MATERIAL TUBE & SOCKET MOVEMENT RANGES DIAL STANDARD
HVAC/R GAS TEST GAUGE Hex or Bell Type mounting 5 to00 Psi pressure ranges Steel case and brass internals Use to pressure test all new gas installations for leaks and passing inspection codes. After installing
ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM. UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN DESIGN
ECLIPSE CHROME WIRE SHELVING ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN A S S E M B LY Fully Adjustable
Tubular connection elements
KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular
Think precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
MaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
VCE VET ENGINEERING STUDIES
Victorian Certificate of Education 2013 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET ENGINEERING STUDIES Written examination Section Wednesday 20 November 2013
www.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
TRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
DMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
RAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
Installation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
RL HW / RL HW+ / RL HGW / RL HV / RL HVPW/RL HVPW-G
Auto-Levelling Rotary Laser Level RL HW / RL HW+ / RL HGW / RL HV / RL HVPW/RL HVPW-G 77-496 / 77-429 / 77-439 / 77-497 / 77-427/ 77-441 Please read these instructions before operating the product Auto-Levelling
40-6680 5 Beam Laser Pointer Service Manual
40-6680 5 Beam Laser Pointer Service Manual Contents Item Description Pages 1.0 Introduction 2 2.0 Overall Instrument Dis-assembly 2 2.1 Body module Dis-assembly 3 2.2 Core Module Dis-Assembly 4-5 2.3
Gate Leg Drop Leaf Table Plans
Preparing the table top blanks: Cut and glue enough 3/4 stock to make three panels 40 long by 24 wide (they will be cut to final size at a later time). While the glue dries we will work on the legs. Preparing
Installation Instructions and Ordering Information
The Flush Finish Trimless Door Frame Installation Instructions and Ordering Information CLEAN LINES! The Flush Finish Door Jamb System Manufactured by STUDCO Building Systems Step 1 Verify if you are using
Thickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
Installation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
Product Information 19 / 45HU Data-Center-Rack (Cabinet)
The Rosenberger-OSI Data-Center-Rack has been developed especially for FO patch distributors in Data Centers. In Data Centers the requirement for highest density becomes increasingly more important than
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
Chapter 73 Articles of iron or steel
Notes. Chapter 73 Articles of iron or steel 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and
MEASURING MACHINES. Pratt & Whitney METROLOGY LABORATORY. Measurement Systems, Inc.
METROLOGY LABORATORY Pratt & Whitney Measurement s, Inc. METROLOGY LABORATORY The Standard of Accuracy Pratt & Whitney Metrology Laboratory Machines are the standard of accuracy to which all other gages
Step by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
Engineered Solutions
Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to
Wren Kitchens Installation Tips... 3. Carefully check your kitchen delivery... 4. Measuring out and marking up... 5. Fitting the base cabinets...
tra 1 Index Wren Kitchens Installation Tips... 3 Carefully check your kitchen delivery... 4 Measuring out and marking up... 5 Fitting the base cabinets... 6 Fitting the corner cabinets... 7 The 972mm or
TELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
NEWSTAR BROCHURE. December 2007
NEWSTAR BROCHURE December 2007 Surface Overhead Door Closers Door Closing 5003 Silver Slide Cover SE Door Widths from 850mm to 1100mm. Door Weights 40kg to 80kg. Suitable for use in temperatures from -15
Part Number Description D" x W" x H" ESSIX, Bed, Full, 3-Piece Wood Deck, Uses Mattress 56 89 38. Sized 54" x 80" - Not Included
Extruded aluminum posts Material :Y Veneer plywood or L Laminate headboard/footboard with matching PVC edge band One-piece steel side rails: black 7 deck heights with steel pin channel Open Market Tip:
Panel Carts refer Page 112. 136 Intex Price Guide All prices are exclusive of GST
Panel Carts refer Page 112 136 Intex Price Guide All prices are exclusive of GST Cradle outriggers easily adjust Fast action single stage winch with silent cam lock brake Unique tilting cradle for easy
Atling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
QUANTIFYING SOLAR ENERGY
www.sustainicum.at QUANTIFYING SOLAR ENERGY Recommendations for implementation in the course Author: E-Mail address: Institution: Philipp Weihs weihs@mail.boku.ac.at BOKU Important considerations Very
Item Number Description Type of Gauge Size in " Price
FARIA Euro Perimeter lighted black dial with bold white graphics, black aluminum bezel, contoured white pointer and flat fog resistant lens EURO Item Number Description Type of Gauge Size in " Price 32805
Flash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
Mandrel system MIS. www.microcentric.de
Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
Metal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel Easy Folding Bends
FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Tools and Glue. Required Materials
Do not try to make your ornithopter using "household materials". If you want it to fly, you have to build it right. FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Wingspan: 16 inches Weight: 1/4 ounce The Ornithopter
How to Install UnderDeck The Original.
How to Install UnderDeck The Original. TOOLS: Chalk Line Caulk Gun Garden hose or water bucket Gloves Hammer or Screw Gun Power Mitre Saw with OSB Blade Pencil Pliers Safety Glasses Straight Edge / Carpenter
tidesmarine Smart Seal Temperature Alarm System Generation II Installation Instructions Starboard side cable
tidesmarine Smart Seal Temperature Alarm System Generation II Installation Instructions Starboard side cable Port side cable (with black cable tie attached) Power cable Preparing for Installation 1 Overall
Cable & Rod Displays DELIVERY NEXT DAY
4 Cable & Rod Displays LED Cable Kits 48 Cable Poster Kits 49-50 Freestanding Cable Poster Kits 51 Cable Fixings 5-5 Rod Fixings 54-55 Cable/Rod Acrylic Accessories 56 Cable/Rod Poster Pocket Accessories
Can you design a frameless shower enclosure that doesn't leak?
Can you design a frameless shower enclosure that doesn't leak? With proper design and installation frameless shower enclosures should not have any problems with water leakage, but they are not 100 percent
Incorporating V2.3. Product spec >>> > Series ECG - Egg Crate Grilles. > Series ECG45-45 Egg Crate Grilles
Incorporating V2.3 Product spec >>> > Series ECG - Egg Crate Grilles > Series ECG45-45 Egg Crate Grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract
Rose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au
Rose Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Robert Watson Series 20 Symphony Series 1420 Symphony Series 1360 Series Door
Installation instruction do88 Intercooler for Volvo S40 / V50 / C30
Installation instruction do88 Intercooler for Volvo S40 / V50 / C30 This instruction shows how to replace the OEM intercooler with our performance intercooler. 2. 3. 1. 4. 5. Part number: ICM-170 6. At
Basic Technical Fundamentals of Builders Hardware Mortise, Bored and Auxiliary Locks
Mortise, Bored and Auxiliary Locks Copyright 2002, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Page SARGENT History...................................................
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
Magnetic Levitation Track Construction Instruction Manual August 2012
This document is intended to be used by Science Olympiad teams to assist them in building a magnetically-levitated track that will meet all specifications in the event rules for Magnetic Levitation and
Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
CONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
Sense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,