INDEX. BALL LOCK BUTTONS IB_ Counter Bore Relief with Standard Hole...37 IF_ Ultra Life/Taper Relief with Standard Hole...38

Transcription

1

2

3 INEX olicies, Terms & Conditions...2 elivery Schedule...3 Catalog Nomenclature & Ordering Examples...4 OCK UNCHES HEVY UTY IH_ Solid with Standard oint...5 IE_ Ejector with Standard oint...6 IH_ ilots...7 I_ lanks...8 IN_ Nose arge Solid with Standard oint...9 I_ Nose arge Ejector with Standard oint...10 OCK UNCHES IHT UTY I_ Solid with Standard oint...11 IJ_ Ejector with Standard oint...12 I_ ilots...13 I_ lanks...14 IO_ Nose arge Solid with Standard oint...15 IV_ Nose arge Ejector with Standard oint...16 OCK UNCHES EXT HEVY UTY IX_ Solid with Standard oint...17 IX lanks...18 SHOUE UNCHES SIC IS_ Solid with Standard oint...19 IC_ Ejector with Standard oint...20 IS_ ilots...21 IS Compact ilot / ointed Type...22 ISV Compact ilot / Straight Type...22 I_ lanks...23 SHOUE UNCHES SEECTIVE I_ Solid with Standard oint...24 IY_ Ejector with Standard oint...25 I_ ilots...26 I Compact ilot / ointed Type...27 IV Compact ilot / Straight Type...27 I_ lanks...28 EUCE SHNK UNCHES IX Solid...29 IYX Ejector...29 QUI UNCHES IQS Square Head...30 IQ evel Head...30 ESS FIT UTTONS I_ Counter ore elief with Standard Hole...31 I_ Counter ore elief / Extended ange...32 IU_ Ultra ife/taper elief with Standard Hole...33 IU_ Ultra ife/taper elief / Extended ange...34 OCK UTTONS I_ Counter ore elief with Standard Hole...37 IF_ Ultra ife/taper elief with Standard Hole...38 UTTON NKS I_ ress Fit with Counter ore elief...39 I_ ress Fit with Straight Thru Hole...40 I_ all ock with Counter ore or Straight Thru Hole...41 UNIVES SHES I_U...42, 43, 44 THE FOm TOOIN I_Q Thread Form Tooling...45 ETINES I_ True Set...46 I_ Economy ound True Set...47 I_ Square Type...48 I_ End Type...49 IX Extra Heavy uty...50 Special Multi Hole all ock...51 I_ Shoulder True Set...52 ETINE CCESSOIES / COmONENTS etainer Components...53 etainer ccessories...54 UETHNE ITO Strippers Open End...55 ITC Strippers Closed End...56 Sheets, ars, ods, Specials...57 EjECTO COmONENTS...58 STN TETIONS ocating evices...59, 60 Out of ange or...61, 62 utton Slug Control...62 Overall ength or Head imension...63 SECI TETIONS Shears, Extrusions, Shank eduction...64 TECHNIC TOICS all ock Space equirements...65 Ejector Specifications...65 Clearances...66 Surface Treatment Selector...66 EFOmNCE ENHNCES...67,68 SHOUE UTTONS II_ Counter ore elief with Standard Hole...35 IM_ Ultra ife/taper elief with Standard Hole

4 OICIES, TEMS N CONITIONS Moeller s urchase ith Confidence uarantee! Customer satisfaction is Moeller s ultimate goal. Moeller was the first domestic punch manufacturer to receive its ISO certification. Moeller products are manufactured to NM, NMS or other recognized industrial standards and are 100% interchangeable with all competing brands. Moeller uses only the highest commercially available grades of high speed and tool steels. The products are heat treated to exacting specifications then processed on some of the best equipment in the industry. Moeller products are warranted to meet or exceed the performance of like products from competing brands. If a customer is unsatisfied, Moeller will replace or allow the customer to return the product for full credit. Over Shipments/Under Shipments: ecause of normal part losses due to machining set-up, Moeller requires that an over or undershipment of + 10% be allowed on quantities of 13 pieces or more. artial Shipments: Standard line items are batched and shipped according to the latest line item due. Specials are shipped according to line item due dates. Note: Moeller will accommodate any partial shipment as requested by the customer. eturns: 1. Catalog items that are custom ground to customer specifications are often non reusable; Moeller will apply discretion for a 15% credit for reusable items. 2. Unused, off the shelf items such as punch blanks and standard retainers can be returned for a 15% restocking charge. The item must be in the orignal packaging in resalable condition. 3. Special make-to-print items are not returnable. 4. Moeller reserves the discretion for all returns exceeding one year from invoice date. Method of Shipment: Moeller ships US or Federal Express whenever possible, unless weight requirements dictate truck delivery, or as specifically requested by the customer. Cancellation: If labor or material has been applied to a cancelled job, a prorated charge will be billed. rices/standards: See current price supplement in effect. rices/specials: er factory quotation good for 90 days or as specified. Terms: Net 30 days, F.O.. our plant, 1 1 / 2 % per month late payment charge. U.S. dollars. Moeller Customer Service Stock rogram: Moeller is pleased to offer an exclusive Service Stock rogram to select customers. The Customer Service Stock program offers many benefits to our valued customers, including product cost reduction, immediate on hand availability, and reduced customer inventory costs. Moeller will manufacture your annual or semi-annual requirements for ierce Tooling and ie Components and make them available for immediate shipment. The parts are billed only as shipped. written purchase order is required with inventory set-up and parts must be released in the subsequent year. lease contact your Moeller Sales epresentative for more details. Moeller reserves the right to modify, correct or improve this literature or products without notice. 2

5 EIvEy SCHEUE/ EXEITE SEvICES STN EIVEY SmE Y/1 Y: unch and utton lanks, Standard etainers and ll Other Stocked roducts 3 OKIN YS: Standard In-ange unches and ie uttons Includes one Standard lteration Quantities of 23 ieces or ess 5 OKIN YS: Nose arge unches & uttons over 45 mm iameter Includes one Standard lteration Quantities of 7 ieces or ess 10 OKIN YS: Universal Shaped unches and ie uttons, Quill unches & Closed End Strippers EFOmNCE ENHNCE: TiN, TiCN, MOST, CF, MS, TiIN, lcrona NOTE: 2-10 dditional ork ays to the Standard elivery ate OES MUST E ECEIVE EFOE 11:00M EST (O S OVE Y CUSTOME SEVICE EESENTTIVE) TO E CONSIEE OK Y. QUNTITIES E THN 23 IECES MY EQUIE ITION E TIME. CUSTOME SEVICE EESENTTIVE MUST CONSUT FCTOY. N..S. NEXT Y SEVICE Standard roducts eceived by 5:30 p.m. EST ill Ship Next ay QUIFYIN OUCTS: ound iercing roducts (excluding Ultra ife) EQUIE SECIFICTIONS: 1. N..S. Items MUST be on an Independent Order (i.e. they must be separate from other delivery items) 2. Service imited to Quantities of 1-20 ieces 3. MUST be within Standard Catalog ange 4. Customer MUST Specify Next ay Service 5. Customer SHOU Specify Method of Shipment (e.g. US, US Next ay ir, ick Up, etc.) COST: No dditional Charge EQUIE SECIFICTIONS MUST E CEY STTE ON INEENENT UCHSE OE(S) TO UNTEE NEXT Y SEVICE. E TImE: S..S. SmE Y SEVICE Orders MUST be received before 11:00 a.m. EST or as approved by a Customer Service epresentative E..S. EXEITE EIVEY SEVICE roducts Shipped Earlier Than Standard elivery E TImE: s Negotiated with a Customer Service epresentative QUIFYIN OUCTS: ll Standard Catalog Items COST: ist rice + 25% Net Minimum Order = $25.00 QUIFYIN OUCTS: 1. Catalog Standard roducts with Only One Standard lteration 2. ound roducts - 20 iece Maximum Shaped roducts - 10 iece Maximum 3. Coating Excluded 4. Excluded roducts: Nose arge unches, arge uttons, Urethane, Close Space or Quill unches Some escriptive Shaped roducts COST: ist rice + 50% Net Minimum Order = $50.00 CUSTOME SEVICE EESENTTIVE MUST ECEIVE OV FOM EITHE OUCTION CONTO MNE O NT SUEINTENENT. 3

6 CTO NOMENCTUE FIST H CHCTE THI H CHCTE OVE ENTH OINT O UTTON HOE SIZES CUSTOm ENTH, STN TETIONS O UNIVES SHE COE X IHO C = =, EXTENE OUCT INE EFIX X SEE EXTENE NE OCHUES SECON H CHCTE first character mesuement SYSTEm I = Inch M = Metric OUCT INE OY O SHNK ImETE STN O,, C,, E, ENTH/N ImENSION secon character asic ody Type ccessories all ock uttons Counter ore elief C Shoulder unch asic/ejector ress Fit utton Counter ore elief E all ock unch Heavy uty/ejector F all ock utton Ultra ife/taper elief uide ushing H all ock unch Heavy uty/solid I Shoulder utton Counter ore elief J all ock unch ight uty/ejector all ock unch ight uty/solid M Shoulder utton ress Fit Ultra ife/taper elief N Nose arge unch Heavy uty/solid O Nose arge unch ight uty/solid Shoulder unch Selective/Solid Q Quill unch Square/evel Head etainers S Shoulder unch asic/solid T Strippers U ress Fit utton Ultra ife/taper elief V Nose arge unch ight uty/ejector Nose arge unch Heavy uty/ejector X all ock unch Extra Heavy uty/solid Y Shoulder unch Selective/Ejector thir character unches or uttons ilot - ong ead lank - unch & utton C Circular ee F Flatted ound H Hexagon K Key Flat O Oblong ilot ullet Nose Q Thread Form ectangle S Square T ilot Standard U Universal Shapes V Straight Compact ong ead ilot ointed Compact ong ead ilot X educed ody unch etainers all ock etractable / E End Type Heavy uty F Square Type ight uty End Type ight uty H True Set Heavy uty True Set ight uty True Set Economy Heavy uty S Square Type Heavy uty X Extra Heavy uty Strippers True Strip Units for all ock etainers J True Strip Unit - Economy ound all ock K True Strip Unit - Economy Shape all ock True Strip Unit - Economy lank all ock T True Strip Unit - ound all ock U True Strip Unit - lank all ock Z True Strip Unit - Shape all ock True Strip Units for Shoulder etainers V True Strip Unit - lank Shoulder True Strip Unit - Shape Shoulder X True Strip Unit - ound Shoulder Urethane Strippers C Closed End Strippers O Open End Strippers ccessories True Strip ssembly Tool alls C Cap Screws, all elease Screws owels E Ejector Component ssembly Ejector in ockout Kit N etainer ngle Hole Set Screw O etainer ngle Hole Hex rench ins Ejectors S Springs T all elease Tools Shoulder etainer acking late X True Set etainer Shim lates Y ound etainer Shim lates OE EXME: all lock punch heavy duty with oblong point and ength of 1.00, standard alteration of ballseat rotated to 45 degrees IHO C =.625 =.325 S@45 Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49,

7 OUN OON OCK UNCHES OUN OON OON SQUE OON SQUE HEvy IHCIHO UTy/ IHO IHS IHOSOI IHS IHCIHO IC IOIC IO IO IS IO 90 IS ECTNE SQUE IH IHS I IS ECTNE HEXON ECTNE HEXON IHH IH IH I IH_ IHC ONHEXON HEXON KEYFT HIHH IHH IHK IH 180 IH IK HEXON IHH OUN IHC KEYFT IHK IK OON IHO KEYFT IHK IK KEYFT IHK FTTE OUN KEYFT IHF IHK IF IK SQUE IHS FTTE OUN FTTE OUN IHF IHF IF IF FTTE OUN IHF SQUE IHS IS ECTNE FTTE OUN EE IH IHF I IF ECTNE IH I IH IH I EE IC IH I /-.000 IH EE IH EE EE IH I 0 I IHH IH /-.000 HEXON IHH IH 1/2 KEYF H IH I 270 FO STN TETIONS SEE ES VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com OUN SHE OvE ENTH CTO SHNK TyE NE MIN MX / IH_ X X X X X X X X X X X X X IH_ X X X X X X X X X X X X X X IH_ X X X X X X X X X X X X X X IH_ X X X X X X X X X X X X X X IH_ X X X X X X X X X X X X X IH_ X X X X X X X X X X X X IH_ X X X X X X X X X X X X Steel: M2, HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 4 IHC X1 = 4.85 EXME: 8 IHO x Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, OINT ENTH CTO SHNK NM TENTES TyE ST C E MIN =2.50 MIN =2.75 MIN =3.00 MIN =3.25 IH_ IH_ IH_ IH_ IH_ IH_ IH_ STN SET OCTION IS T 90 S SHON. VIE T 0, 180, 270, FO SME ICE. 5

8 OCK UNCHES HEvy UTy/ EjECTO OUN OON OUN OON OON OON SQUE SQUE SQUE ECTNE SQUE ECTNE ECTNE ECTNE HEXON HEXON HEXON HEXON KEYFT KEYFT C C ON IEO IEC IJO IJC HEXON KEYFT H 180 IEHIEK IJHIJK HEXON IEH OUN IEC IEO IJO IEO IJO OON IEO KEYFT KEYFT IEK IEK IJK IJK KEYFT IEK IEO IES IJO IJS 90 FTTE KEYFT OUN IEK IEF IJK IJF VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com 270 IES IJS SQUE IES IES IJS FTTE FTTE OUN OUN IEF IEF IJF IJF FTTE OUN IEF IES IE IJS IJ ECTNE FTTE OUNEE IEF IE IJFIJ IE EE IE IE IJ EE EE IE IJ IE 0 IE IJ IJ EE IE IEH IJ IJH IE IJ IE_ IEC IJC IEH IJH / /2 FO STN TETIONS SEE ES IEH IJH /-.000 SHNK OUN SHE OvE ENTH CTO TyE I NE MIN MX / IE_ X X X X X X X X X X X IE_ X X X X X X X X X X X X X X X IE_ X X X X X X X X X X X X X X X IE_ X X X X X X X X X X X X X X X IE_ X X X X X X X X X X X X X X IE_ X X X X X X X X X X X X X IE_ X X X X X X X X X X X X X IEH IEK IJH IJK IEK IJK Steel: M2, HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 5 IEC X2 = 2.98 EXME: 7 IEO x Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, SHNK OINT ENTH CTO I NM TENTES EjECTO TyE ST C E SIZE MIN =2.50 MIN =2.75 MIN =3.00 MIN =3.25 IE_ IE 4 IE_ IE 6 IE_ IE 6 IE_ IE 9 IE_ IE 9 IE_ IE 9 IE_ IE 9 STN SET OCTION IS T 90 S SHON. VIE T 0, 180, 270, FO SME ICE. 6

9 OCK IOTS HEvy UTy STN STYE UET NOSE STYE ON E STYE IHT IH IHT IH IH IT I I IH / / *.09 / / E / / N* * SIHTY ESS FO I'S UNE.222 OIC SHE SHEIC. IM E / U 13/32 40 INCUE NE N * HEN ECOMES IS EO 1.2 X HEN IS EO MIN N ECOMES 1.2 X IM (SEE CHT) FO STN TETIONS SEE ES Complete design & C files visit.moeemc.com SHNK ENTH CTO MIN IM I NE TyE N FO N E IH_ X X X X X X X X X X X X IH_ X X X X X X X X X X X X X IH_ X X X X X X X X X X X X X IH_ X X X X X X X X X X X X X IH_ X X X X X X X X X X X X IH_ X X X X X X X X X X X IH_ X X X X X X X X X X X Steel: M2, HC Standard oint Tolerance ound to hen = Shank Tolerances pply OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 6 IHT X1 = 4.85 EXME: 2 IH Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, SHNK OINT ENTH CTO I NM TENTES TyE ST C E MIN =2.50 MIN =2.75 MIN =3.00 MIN =3.25 IH_ IH_ IH_ IH_ IH_ IH_ IH_

10 OCK UNCH NKS HEvy UTy/ SOI/ EjECTO IH IH I /-.000 IE IJ IE / Steel: M2, HC OE EXME: (eference page 4) SECIFy: QTy: TyE EXME: 4 IH EXME: 6 IE Complete design & C files visit.moeemc.com FO STN TETIONS SEE ES CTO SHNK OvE ENTH NUME I SOI IH X X X X X X X X X X X X X IH X X X X X X X X X X X X X X IH X X X X X X X X X X X X X X IH X X X X X X X X X X X X X X IH X X X X X X X X X X X X X IH X X X X X X X X X X X X IH X X X X X X X X X X X X CTO SHNK OvE ENTH NUME EjECTO I SIZE EjECTO IE X X X X X X X X X X X IE 4 IE X X X X X X X X X X X X X X X IE 6 IE X X X X X X X X X X X X X X X IE 6 IE X X X X X X X X X X X X X X X IE 9 IE X X X X X X X X X X X X X X IE 9 IE X X X X X X X X X X X X X IE 9 IE X X X X X X X X X X X X X IE 9 8

11 NOSE E UNCHES OUN OON SQUE ECTNE HEvy IOO IOC IOOUTy/ IOO IOS SOI IOS OUN OUNOON OON OON SQUE SQUE SQUE ECTNE ECTNE ECTNE HEXON HEXON HEXON HE KE OC NC IOC INCINO INO EXON HEXON IOH IOH IOH IOK INH INH180 INH INK HEXON KEYFT INO INO INS 90 FTTE OUN KEYFT IOF IOK INF INK INS IOS INS IOS IO INS IN IO IN EE IO IO IN IO IOH IN INH IN_ INC EE IO IOC IN /-.000 FTTE OUN EE IOF IO INF IN OUN INC HEXON INH OON INO KEYFT KEYFT IOK IOK INK INK KEYFT INK SQUE INS FTTE FTTE OUN OUN IOF IOF INF INF FTTE OUN INF ECTNE IN EE IN EE IO IN 0 IN IOH INH /-.000 S IOH INH IOI INI 270 FO STN TETIONS SEE ES VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com CTO TyE SHNK OINT OUN SHE OvE ENTH I ENTH NE MIN MX S / IN_ X X X X X IN_ X X X X X X X X X IN_ X X X X X X X X X IN_ X X X X X X X X X IN_ X X X X X X X X X IN_ X X X X X X X X X IN_ X X X X X X X Steel: M2, HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) (O &) TETION SECIFy: QTy: TyE IMENSIONS COE EXME: 2 INC X1 = 3.85 EXME: 5 INO x.625 Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, STN SET OCTION IS T 90 S SHON. VIE T 0, 180, 270, FO SME ICE. 9

12 NOSE E UNCHES OUN OON OUN OON OON OON SQUE SQUE SQUE ECTNE SQUE ECTNE ECTNE ECTNE HEXON HEXON HEXON HEXON KEYFT HEvy IVC IVO IVO UTy/ IVO IVSEjECTO IVCIVO ICIO ICIO ON HEXON KEYFT H IVH IVK IVK IVK H180 IH IK IK IK OUN IC HEXON IH IO IO IS 90 FTTE OUN KEYFT IS IVF IVK IVF IVF IF IKIFIF IS IVS IV IS I FTTE OUN EE IV I IV I IV IVH I IH I_ IC EE IVIVC I /-.000 /-.000 S IVH IH IVH IVK IH IK EE IV IVF IV IV IF I I 0 I OON IO KEYFT KEYFT KEYFT IK SQUE IS FTTE FTTE OUN OUN FTTE OUN IF ECTNE I EE I EE IVH IH 270 FO STN TETIONS SEE ES VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com CTO TyE SHNK OINT OUN SHE OvE ENTH I ENTH NE MIN MX EjECTO S / SIZE I_ X X X X X IE 4 I_ X X X X X X X X X IE 6 I_ X X X X X X X X X IE 6 I_ X X X X X X X X X IE 9 I_ X X X X X X X X X IE 9 I_ X X X X X X X X X IE 9 I_ X X X X X X X IE 9 Steel: M2, HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) (O &) TETION SECIFy: QTy: TyE IMENSIONS COE EXME: 8 IC EXME: 3 I x.625 X1 = 4.35 Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, STN SET OCTION IS T 90 S SHON. VIE T 0, 180, 270, FO SME ICE. 10

13 OUN XONHEXON H H OCK UNCHES OON OUN OON OON SQUE OON SQUE IHT UTy/ SOI IHCIHOIHCIHO IC IOIC IO IHH IHH IHK IH180 IH IK HEXON IH IHO IO IHS IHO IHS IS IO 90 IS ECTNE SQUE IH IHS I IS ECTNE HEXON ECTNE HEXON IHH IH IH I I_ IHC OUN IC HEXON KEYFT KEYFT IHK IK OON IO KEYFT IHK IK KEYFT IK FTTE OUN KEYFT IHF IHK IF IK SQUE IS FTTE OUN FTTE OUN IHF IHF IF IF FTTE OUN IF SQUE IHS IS ECTNE FTTE OUN EE IH IHF I IF ECTNE IH I IH IH I EE IC IH I /-.000 I EE I EE EE IH I 0 I IHH IH /-.000 HEXON IHH IH 1/2 K I I 270 FO STN TETIONS SEE ES VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com SHNK OUN SHE OvE ENTH CTO TyE I NE MIN MX / I_ X X X X X X X X X I_ X X X X X X X X X X X X I_ X X X X X X X X X X X X I_ X X X X X X X X X X X X I_ X X X X X X X X X X X I_ X X X X X X X X X X X I_ X X X X X X X X X X X Steel: M2, HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 3 IC S2 = 7 EXME: 7 I x.605 =.080 X2 = Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, SHNK CTO I TyE STN SET OCTION IS T 90 S SHON. VIE T 0, 180, 270, FO SME ICE. OINT ENTH NM TENTES ST C MIN =2.00 MIN =2.25 MIN =2.50 I_ I_ I_ I_ I_ I_ I_

14 OCK UNCHES IHT UTy/ EjECTO OUN OON OUN OON OON OON SQUE SQUE SQUE ECTNE SQUE ECTNE ECTNE ECTNE HEXON HEXON HEXON HEXON KEYFT KEYF IEC IJC XON IEO IEC IJO IJC OUN IjC HEXON KEYFT H IEHIEK 180 H IJHIJK HEXON IjH IEO IJO IEO IJO OON IjO KEYFT KEYFT IEK IEK IJK IJK KEYFT IjK IEO IES IJO IJS 90 FTTE KEYFT OUN IEK IEF IJK IJF VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com 270 IES IJS SQUE IjS IES IJS FTTE FTTE OUN OUN IEF IEF IJF IJF FTTE OUN IjF IES IE IJS IJ ECTNE FTTE OUNEE IEF IE IJFIJ Ij EE Ij IE IJ EE EE IE IJ IE IE 0 IJ IJ EE IE IEH IJ IJH IE IJ Ij_ IEC IJC IEH IJH / /2 FO STN TETIONS SEE ES IEH IJH /-.000 SHNK OUN SHE OvE ENTH CTO TyE I NE MIN MX / IJ_ X X X X X X X IJ_ X X X X X X X X X IJ_ X X X X X X X X X IJ_ X X X X X X X X X IJ_ X X X X X X X X IJ_ X X X X X X X X IJ_ X X X X X X X X IEH IEK IJH IJK IE IJK Steel: M2, HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 9 IJC X1 = 3.85 EXME: 6 IJO x.625 S3 = 5 Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, SHNK CTO I TyE OINT ENTH NM TENTES EjECTO ST C SIZE MIN =2.00 MIN =2.25 MIN =2.50 IJ_ IE 3 IJ_ IE 4 IJ_ IE 6 IJ_ IE6 IJ_ IE 9 IJ_ IE 9 IJ_ IE 9 STN SET OCTION IS T 90 S SHON. VIE T 0, 180, 270, FO SME ICE. 12

15 OCK IOTS IHT UTy STN STYE UET NOSE STYE ON E STYE IHT IH IT I I IH / / *.09 / / E / / N* * SIHTY ESS FO I'S UNE.222 OIC SHE SHEIC. IM E / U 13/32 40 INCUE NE * N HEN ECOMES IS EO 1.2 X HEN IS EO MIN N ECOMES 1.2 X IM (SEE CHT) FO STN TETIONS SEE ES Complete design & C files visit.moeemc.com SHNK ENTH CTO MIN IM I NE TyE N FO N E I_ X X X X X X X X X I_ X X X X X X X X X X X X I_ X X X X X X X X X X X X I_ X X X X X X X X X X X X I_ X X X X X X X X X X X I_ X X X X X X X X X X X I_ X X X X X X X X X X X Steel: M2, HC Standard oint Tolerance ound to hen = Shank Tolerances pply OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 4 IT X1 = 4.85 EXME: 2 I Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, SHNK OINT ENTH CTO I NM TENTES TyE ST C MIN =2.00 MIN =2.25 MIN =2.50 I_ I_ I_ I_ I_ I_ I_

16 OCK UNCH NKS IHT UTy/SOI/EjECTO IH I IE IJ Ij /-.000 / Steel: M2, HC OE EXME: (eference page 4) SECIFy: QTy: TyE EXME: 2 I EXME: 6 IJ Complete design & C files visit.moeemc.com FO STN TETIONS SEE ES CTO SHNK OvE ENTH NUME I SOI I 25 X X X X X X X X X X I X X X X X X X X X X X X X I X X X X X X X X X X X X X X I X X X X X X X X X X X X X X I X X X X X X X X X X X X X I X X X X X X X X X X X X X I X X X X X X X X X X X X X I X X X X CTO SHNK OvE ENTH NUME I EjECTO EjECTO SIZE IJ 25 X X X X X X X IE 3 IJ X X X X X X X X X IE 4 IJ X X X X X X X X X IE 6 IJ X X X X X X X X X IE 6 IJ X X X X X X X X IE 9 IJ X X X X X X X X IE 9 IJ X X X X X X X X IE 9 14

17 NOSE E UNCHES OUN OUNOON OON OON OON SQUE SQUE SQUE ECTNE SQUE ECTNE ECTNE ECTNE HEXON HEXON HEXON HK OC NC IHT IOO IOC IOO UTy/ IOO IOO SOI IOS IOC INCINO INO HEXON HEXON IOH IOH IOH IOK INH INH180 INH INK HEXON KEYFT INO INO INS 90 FTTE OUN KEYFT IOF IOK INF INK IOS INS IOS INS IOS IO INS IN IO IN EE IO IO IN IO IOH IN INH IO_ INC EE IO IOC IN /-.000 FTTE OUN EE IOF IO INF IN OUN IOC HEXON IOH OON IOO KEYFT KEYFT IOK IOK INK INK KEYFT IOK SQUE IOS FTTE FTTE OUN OUN IOF IOF INF INF FTTE OUN IOF ECTNE IO EE IO EE IO IN 0 IN IOH INH /-.000 S IOH INH I I 270 FO STN TETIONS SEE ES VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com CTO TyE SHNK OINT OUN SHE OvE ENTH I ENTH NE MIN MX S / IO_ X X X X X IO_ X X X X X X X X X IO_ X X X X X X X X X IO_ X X X X X X X X X IO_ X X X X X X X X X IO_ X X X X X X X X X IO_ X X X X X X X Steel: M2, HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) (O &) TETION SECIFy: QTy: TyE IMENSIONS COE EXME: 5 IOC X1 = 3.85 EXME: 8 IOS = Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, STN SET OCTION IS T 90 S SHON. VIE T 0, 180, 270, FO SME ICE. 15

18 NOSE E UNCHES OUN OON OUN OON OON OON SQUE SQUE SQUE ECTNE SQUE ECTNE ECTNE ECTNE HEXON HEXON HEXON HEXON KEYFT IHT IVC IVO UTy/ IVO IVO IVS EjECTO IVS IVS IVC IVO ICIO ICIO ON OUN IVC HEXON KEYFT OON IVO H IVH IVK IVK IVK H180 IH IK IK IK HEXON IVH IO IO IS 90 KEYFT IVK FTTE KEYFT OUN IS SQUE IVS IVF IVK IVF IVF IF IKIFIF FTTE OUN IVF IS IVS IV IS I ECTNE IV FTTE OUNEE IVF IV IVIV IF I I 0 I IV_ IC EE IVIVC I /-.000 EE IV IV I IV I KEYFT KEYFT FTTE FTTE OUN OUN IV IVH I IH /-.000 S IVH IVK IH IK EE EE IVH IH IVH IH 270 FO STN TETIONS SEE ES VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com CTO TyE SHNK OINT OUN SHE OvE ENTH I ENTH NE MIN MX EjECTO S / SIZE IV_ X X X X X IE 4 IV_ X X X X X X X X X IE 6 IV_ X X X X X X X X X IE 6 IV_ X X X X X X X X X IE 9 IV_ X X X X X X X X X IE 9 IV_ X X X X X X X X X IE 9 IV_ X X X X X X X IE 9 Steel: M2, HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) (O &) TETION SECIFy: QTy: TyE IMENSIONS COE EXME: 8 IVC X1 = 3.35 EXME: 4 IVS = Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, STN SET OCTION IS T 90 S SHON. VIE T 0, 180, 270, FO SME ICE. 16

19 OUN OCK UNCHES OON OUN OON OON SQUE OON SQUE SQUE ECTNE SQUE EXT HEvy UTy/ SOI IHCIHOIHCIHO IC IOIC IO IHO IO IHS IHO IHS IS IO 90 IS IHS IS IH IHS I IS ECTNE IH I ECTNE HEXON ECTNE HEXON IH I IHH IH IH I IX_ IXC ONHEXON H H HEXON KEYFT IHH IHH IHK IH 180 IH IK HEXON IXH OUN IXC KEYFT IHK IK OON IXO KEYFT IHK IK KEYFT IXK FTTE OUN KEYFT IHF IHK IF IK SQUE IXS FTTE OUN FTTE OUN IHF IHF IF IF FTTE OUN IXF ECTNE IX FTTE OUN EE IH IHF I IF EE IX EE EE IH I 0 I IH EE IH I /-.000 IHH IH /-.000 HEXON IHH IH KE IH I 1/2 270 FO STN TETIONS SEE ES VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com CTO TyE SHNK I OINT OUN SHE OvE ENTH SHNK ENTH NE MIN MX TOENCE / IX_ / X X X IX_ / X X X IX_ / X X X IX_ / X X X IX_ / X X IX_ / X X IX_ / X X Steel: M2, HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) (O &) TETION SECIFy: QTy: TyE IMENSIONS COE EXME: 3 IXC X1 = 4.90 EXME: 6 IXO X Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, STN SET OCTION IS T 90 S SHON. VIE T 0, 180, 270, FO SME ICE. 17

20 OCK UNCH NKS IX EXT HEvy UTy /-.000 IX FO STN TETIONS SEE ES Complete design & C files visit.moeemc.com SHNK OvE ENTH CTO I. SHNK NUME TOENCE IX / X X X IX / X X X IX / X X X IX / X X X IX / X X IX / X X IX /.0010 X X Steel: M2, HC OE EXME: (eference page 4) TETION SECIFy: QTy: TyE COE EXME: 3 IX X1 = 4.90 EXME: 6 IX

21 UN C C SHOUE UNCHES SQUE OON OUN OON OON SIC/SOI IO IC IO IO OUN IC ISC HEXON HEXON IH ISH HEXON KEYFT IH IHIK ISH180 ISHISK HEXON ISH ISO ISC ISO OUN ISC KEYFT IK ISK ISO OON ISO KEYFT IK ISK KEYFT ISK OON SQUE FTTE KEYFT OUN IK I ISK ISF SQUE IO IS IS ISO ISS 90 ISS FTTE OUN IS I ISS IS SQUE ISS SQUE IS ISS ECTNE VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com FTTE OUN I I FTTE ISF ISF OUN ISF ECTNE FTTE OUNEE I I ISF IS IS EE IS ECTNE I IS EE EE I IS 0 IS ECTNE I I IS T ECTNE HEXON I IH IS ISH EE I IS / HEXON IH ISH ISC IC IS_ / FO STN TETIONS SEE ES HEXON IH ISH /-.000 OUN SHE OvE ENTH CTO SHNK TyE NE MIN MX / IS_ X X X X X X X X X X X IS_ X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X 1/2 HEXO KEYF IH IK ISH ISK Steel: M2, HC Heads HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 4 ISC X1 = 4.85 EXME: 8 ISO x Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, STN FT OCTION IS T 0 S SHON. VIE T 90, 180, 270, FO SME TETION ICE. 19 HE IM OINT ENTH CTO SHNK NM TENTES TyE T ST C E MIN =1.75 MIN =2.00 MIN =2.25 MIN =2.50 IS_ IS_ IS_ IS_ IS_ IS_ IS_ IS_ IS_ IS_ IS_

22 OUNOON SHOUE UNCHESSQUE OUN OON OON SQUE OON SIC/EjECTO ICCICO ICO ICS ICO ICCICO IYCIYOIYCIYO XON H ICK ICH H180 IYK IYH HEXON ICH OUN ICC IYO IYS IYO 90 SQUE ICS IYS SQUE ICS IYS ECTNE IC ICS IY IYS VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com ECTNE IC IY ECTNEHEXON ECTNE HEXON ICC IYC EE IC IY / / T IC IY ICH IC IYH IY KEYFT HEXON KEYFT ICK IYK OON ICO KEYFT ICK IYK KEYFT ICK FTTE OUN KEYFT ICF ICK IYF IYK 270 SQUE ICS FTTE OUN ICF IYF FTTE OUN ICF FTTE OUN ICF IYF ECTNE IC FTTE OUN EE IC ICF IY IYF EE IC EE IC 0 IY EE IC IY FO STN TETIONS SEE ES IC_ ICH IYH /-.000 OUN SHE OvE ENTH CTO SHNK TyE NE MIN MX / IC_ X X X X X X X X X X X IC_ X X X X X X X X X X X IC_ X X X X X X X X X X X X X X X X X X X IC_ X X X X X X X X X X X X X X X X X X IC_ X X X X X X X X X X X X X X X X X X IC_ X X X X X X X X X X X X X X X X X IC_ X X X X X X X X X X X X X X X X X IC_ X X X X X X X X X X X X X X X X IC_ X X X X X X X X X X X X X X X IC_ X X X X X X X X X X X X X X X IC_ X X X X X X X X X X X X X 1/2 HEXON KEYFT HEXON ICH IYH ICK ICH IYK IYH Steel: M2, HC Heads HC Standard oint Tolerance ound Shape, to.001 to OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 5 ICC X2 = 2.98 EXME: 7 ICO x.685 F6 F =.390 Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, CTO TyE HE OINT ENTH SHNK IM NM TENTES EjECTO T ST C E SIZE MIN =1.75 MIN =2.00 MIN =2.25 MIN =2.50 IC_ IE 2 IC_ IE 3 IC_ IE 4 IC_ IE 6 IC_ IE 6 IC_ IE 6 IC_ IE 9 IC_ IE 9 IC_ IE 9 IC_ IE 9 IC_ IE 9 STN FT OCTION IS T 0 S SHON. VIE T 90, 180, 270, FO SME TETION ICE. 20

23 SHOUE IOTS SIC/IOT STN STYE UET NOSE STYE ON E STYE * IST IS IS I / /-.000 T / IT SIHTY ESS FO I'S UNE.222 OIC SHE * T Complete design & C files visit.moeemc.com IS / / / SHEIC. IM E / U 13/32.09 E T I / / / INCUE NE * N HEN ECOMES IS EO 1.2 X HEN IS EO MIN N ECOMES 1.2 X IM (SEE CHT) SHNK ENTH CTO OINT MIN IM TyE I N NE FO N E IS_ X X X X X X X X X X IS_ X X X X X X X X X X X IS_ X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X IS_ X X X X X X X X X X X X X IS_ X X X X X X X X X X X N * FO STN TETIONS SEE ES Steel: M2, HC Heads HC Standard oint Tolerance ound to OE EXME: (eference page 4) OINT TETION SECIFy: QTy: TyE ENTH IMENSION COE EXME: 6 IST X1 = 4.85 EXME: 2 IS Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, CTO TyE SHNK HE I THICK T OINT ENTH NM TENTES ST C E MIN =1.75 MIN =2.00 MIN =2.25 MIN =2.50 IS_ IS_ IS_ IS_ IS_ IS_ IS_ IS_ IS_ IS_ IS_

24 SHOUE IOTS SIC/COMCT IOT OINTE TYE STYE IS FIET.01 /.02 H T Complete design & C files visit.moeemc.com CTO TyE OINTE SHNK I NE STIHT TYE STYE I NE Ø Ø.12 (1) N 40 INCUE FO STN TETIONS SEE ES ENTH MIN IM N FO N E T H IS X X X X X X X IS X X X X X X X IS X X X X X X X IS X X X X X X X IS X X X X X X X IS X X X X X X IS X X X X X X IS X X X X X X IS X X X X X X * N ECOMES 1.2 X HEN IS EO MIN (SEE CHT) Steel: M2, HC Standard oint Tolerance ound to FIET.01 /.02 Ø Steel: M2, HC ISV H Complete design & C files visit.moeemc.com T N * N ECOMES 1.2 X HEN IS EO MIN (SEE CHT) 40 INCUE OE EXME: (eference page 4) TETION SECIFy: QTy: TyE IMENSION COE EXME: 3 IS X1 =.900 EXME: 5 ISV X4 =.175 Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, FO STN TETIONS SEE ES CTO TyE STIHT SHNK I NE ENTH MIN IM N FO N E T H ISV X X X X X X X ISV X X X X X X X ISV X X X X X X X ISV X X X X X X X ISV X X X X X X X ISV X X X X X X ISV X X X X X X ISV X X X X X X ISV X X X X X X 22

25 SHOUE UNCH NKS SIC/ SOI/ EjECTO T IS I IS / T IC IY IC / / / Steel: M2, HC Heads HC Complete design & C files visit.moeemc.com OE EXME: (eference page 4) SECIFy: QTy: TyE EXME: 4 IS EXME: 6 IC FO STN TETIONS SEE ES CTO SHNK HE IM OvE ENTH NUME I SOI T IS X X X X X X X X IS X X X X X X X X X X X IS X X X X X X X X X X X X IS X X X X X X X X X X X X X X X IS X X X X X X X X X X X X X X X X X IS X X X X X X X X X X X X X X X X X IS X X X X X X X X X X X X X X X X IS X X X X X X X X X X X X X X X X IS X X X X X X X X X X X X X X X IS X X X X X X X X X X X X X X IS X X X X X X X X X X X X X X IS X X X X X X X X X X X X CTO SHNK HE IM OvE ENTH NUME I EjECTO EjECTO T SIZE IC X X X X X X X X X X X IE 2 IC X X X X X X X X X X X IE 3 IC X X X X X X X X X X X X X X X X X X X IE 4 IC X X X X X X X X X X X X X X X X X X IE 6 IC X X X X X X X X X X X X X X X X X X IE 6 IC X X X X X X X X X X X X X X X X X IE 6 IC X X X X X X X X X X X X X X X X X IE 9 IC X X X X X X X X X X X X X X X X IE 9 IC X X X X X X X X X X X X X X X IE9 IC X X X X X X X X X X X X X X X IE 9 IC X X X X X X X X X X X X X IE 9 23

26 SHOUE UNCHESSQUE OON OUN OON OON OON SQUE IO IC IO IO IO IS SEECTIvE/SOI OUN IC ISC ON HEXON H H HEXON KEYFT IH IHIK ISH 180 ISHISK HEXON IH ISO ISC ISO OUN IC KEYFT IK ISK ISO OON IO KEYFT IK ISK KEYFT IK FTTE KEYFT OUN IK I ISK ISF SQUE IS ISO ISS ISS 90 FTTE OUN I ISF SQUE IS ISS ECTNE IS I ISS IS VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com FTTE OUN I ISF ECTNE I IS SQUE IS FTTE OUN IF ECTNE FTTE OUNEE I I ISF IS I EE I ECTNE I IS EE EE I IS 0 IS I T ECTNE HEXON I IH IS ISH EE / ISC IC I_ I IS HEXON IH ISH / FO STN TETIONS SEE ES HEXON IH ISH / /2 HEXON KEYFT IH IK ISH ISK OUN SHE OvE ENTH CTO SHNK NE MIN MX TyE / I_ X X X X X X X I_ X X X X X X X X X X X I_ X X X X X X X X X X X X I_ X X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X I_ X X X X X X X X X X X X Steel: M2, HC Heads HC Standard oint Tolerance ound Shape, lternate oint Tolerance , TOENCE 0 to to.001 to T2 OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 4 IC T2 EXME: 8 IO x Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, STN FT OCTION IS T 0 S SHON. VIE T 90, 180, 270, FO SME TETION ICE. 24 CTO TyE SHNK HE I THICK T OINT ENTH NM TENTES ST C E MIN =1.75 MIN =2.00 MIN =2.25 MIN =2.50 I_ I_ I_ I_ I_ I_ I_ I_ I_ I_ I_ I_

27 OUNOON SHOUE UNCHESSQUE OUN OON SQUE OON SEECTIvE/EjECTO ICCICO ICO ICS ICO ICS ICCICO IYCIYOIYCIYO ICH ICK ICH IYH 180 IYK IYH HEXON IYH VIES E SHON OOKIN THOUH THE SHNK UT N ITH SOI INES FO CITY. Complete design & C files visit.moeemc.com Steel: M2, HC Heads HC Standard oint Tolerance ound Shape, lternate oint Tolerance , TOENCE 0 to.0003 IYO.0005 to.001 to IYS IYO 90 T2 STN FT OCTION IS T 0 S SHON. VIE T 90, 180, 270, FO SME TETION ICE. 25 IC ICS IY IYS / ICC IYC / T ECTNEHEXON ECTNE HEXON ICH IC IYH IY N HEXON OUN IYC KEYFT HEXON OON KEYFT ICK IYK OON IYO KEYFT ICK IYK KEYFT IYK FTTE OUN KEYFT ICF ICK IYF IYK 270 SQUE IYS SQUE IYS FTTE OUN ICF IYF FTTE OUN IYF FTTE OUN ICF IYF SQUE ICS IYS ECTNE ECTNE IY FTTE OUN EE IC ICF IY IYF EE IY CTO TyE ECTNE IC IY EE IC 0 IY EE IC IY IC IY IY_ EE IC IY FO STN TETIONS SEE ES ICH IYH /-.000 OUN SHE OvE ENTH CTO SHNK TyE NE MIN MX / IY_ X X X X X X X X X X X IY_ X X X X X X X X X X X IY_ X X X X X X X X X X X X X X X X X X X IY_ X X X X X X X X X X X X X X X X X X IY_ X X X X X X X X X X X X X X X X X X IY_ X X X X X X X X X X X X X X X X X IY_ X X X X X X X X X X X X X X X X X IY_ X X X X X X X X X X X X X X X X IY_ X X X X X X X X X X X X X X X IY_ X X X X X X X X X X X X X X X IY_ X X X X X X X X X X X X X OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 2 IYC T2 EXME: 6 IYO x.685 F6 F =.390 Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, OINT ENTH HE SHNK IM NM TENTES EjECTO ST C E T SIZE MIN =1.75 MIN =2.00 MIN =2.25 MIN =2.50 IY_ IE 2 IY_ IE 3 IY_ IE 4 IY_ IE 6 IY_ IE 6 IY_ IE 6 IY_ IE 9 IY_ IE 9 IY_ IE 9 IY_ IE 9 IY_ IE 9 1/2 HEXON KEYFT HEX ICH IYH ICK IYK

28 SHOUE IOTS SEECTIvE/IOT STN STYE UET NOSE STYE ON E STYE IT IST I IS I / /-.000 T / IT OIC SHE * T IS / / / SHEIC..09 E T I / / / INCUE NE * N HEN ECOMES IS EO 1.2 X HEN N ECOMES IS EO 1.2 X MIN IM (SEE CHT) * SIHTY ESS FO I'S UNE.222 IM E / U 13/32 FO STN TETIONS SEE ES Complete design & C files visit.moeemc.com SHNK OINT ENTH CTO MIN IM TyE I NE N FO N E I_ X X X X X X X I_ X X X X X X X X X X I_ X X X X X X X X X X X I_ X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X X I_ X X X X X X X X X X X X X I_ X X X X X X X X X X X N * Steel: M2, HC Heads HC Standard oint Tolerance ound lternate oint Tolerance , TOENCE 0 to to T2 OE EXME: (eference page 4) OINT (O &) TETION SECIFy: QTy: TyE ENTH IMENSIONS COE EXME: 3 I X1 = 4.85 EXME: 7 I T2 Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, SHNK HE OINT ENTH CTO I THICK NM TENTES TyE T ST C E MIN =1.75 MIN =2.00 MIN =2.25 MIN =2.50 I_ I_ I_ I_ I_ I_ I_ I_ I_ I_ I_ I_

29 SHOUE IOTS SEECTIvE/COMCT IOT OINTE TYE STYE I Complete design & C files visit.moeemc.com CTO TyE OINTE SHNK I NE H I NE FIET.01 / Ø Ø (1) N 40 INCUE FO STN TETIONS SEE ES ENTH MIN IM N FO N E T H I X X X X X X X I X X X X X X X I X X X X X X X I X X X X X X X I X X X X X X X I X X X X X X I X X X X X X I X X X X X X I X X X X X X * N ECOMES 1.2 X HEN IS EO MIN (SEE CHT) Steel: M2, HC Standard oint Tolerance ound to lternate Hole Tolerance, TOENCE to.0003 T2 STIHT TYE STYE FIET.01 /.02 Ø Steel: M2, HC IV H Complete design & C files visit.moeemc.com N * N ECOMES 1.2 X HEN IS EO MIN (SEE CHT) 40 INCUE OE EXME: (eference page 4) TETION SECIFy: QTy: TyE IMENSION COE EXME: 4 I X1 =.900 EXME: 2 IV X4 =.175 Note: hen ordering, standard quantity breaks are: 1, 2-3, 4-11, 12-23, 24-49, FO STN TETIONS SEE ES CTO TyE STIHT SHNK I NE ENTH MIN IM N FO N E T H IV X X X X X X X IV X X X X X X X IV X X X X X X X IV X X X X X X X IV X X X X X X X IV X X X X X X IV X X X X X X IV X X X X X X IV X X X X X X 27

30 SHOUE UNCH NKS SEECTIvE/ SOI/ EjECTO IS I I IC IY IY T / T / Steel: M2, HC Heads HC / Complete design & C files visit.moeemc.com OE EXME: (eference page 4) SECIFy: QTy: TyE EXME: 4 I EXME: 3 IY / FO STN TETIONS SEE ES CTO SHNK HE OvE ENTH NUME I IM SOI T I X X X X X X X X I X X X X X X X X X X X I X X X X X X X X X X X X I X X X X X X X X X X X X X X X I X X X X X X X X X X X X X X X X I X X X X X X X X X X X X X X X X I X X X X X X X X X X X X X X X I X X X X X X X X X X X X X X X I X X X X X X X X X X X X X X I X X X X X X X X X X X X X I X X X X X X X X X X X X X I X X X X X X X X X X X CTO SHNK HE OvE ENTH NUME I IM EjECTO EjECTO T SIZE IY X X X X X X X X X X X IE 2 IY X X X X X X X X X X X IE 3 IY X X X X X X X X X X X X X X X X X X X IE 4 IY X X X X X X X X X X X X X X X X X X IE 6 IY X X X X X X X X X X X X X X X X X X IE 6 IY X X X X X X X X X X X X X X X X X IE 6 IY X X X X X X X X X X X X X X X X X IE 9 IY X X X X X X X X X X X X X X X X IE 9 IY X X X X X X X X X X X X X X X IE 9 IY X X X X X X X X X X X X X X X IE 9 IY X X X X X X X X X X X X X IE 9