VDI Tool Holders. for Hardinge Machines. In USA, call: In Canada, call: Other, call: Fax:

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "VDI Tool Holders. for Hardinge Machines. In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Other, call: 607-734-2281 Fax: 607-734-8819"

Transcription

1 VI ool Holders for Hardinge Machines QUES 6/42, 8/51 and 10/65 CNC athes EIE 8/51 CNC athes HARINGE-EMAG V3/V5 Vertical CNC athes QUES WINURN 65 CNC urning Centers In USA, call: In Canada, call: Other, call: Fax: Corporate Headquarters and Manufacturing Facilities Brochure 1316C Part No. C C January 2003 Phone: Internet:

2 VI oolholders Page 2 VI urret ooling System QUES 6/42, 8/51 & 10/65 urret op Plate VI 30 Round Shank ool Holders 3/4" or 20mm Right-Hand, 2-Hole 3/4" or 20mm eft-hand, 2-Hole 1-1/4" or 32mm Right-Hand, ong Offset 1-1/4" or 32mm Right-Hand Offset 1-1/4" or 32mm eft-hand, ong Offset 1-1/4" or 32mm eft-hand Offset 3/4", 1", 1-1/4", 1-1/2" 20mm, 25mm, 32mm or 40mm ong 3/4", 1", 1-1/4", 1-1/2" 20mm, 25mm, 32mm or 40mm B A A B B A C C Square Shank ool Holders Cut-Off ER25 Collet ool Holders ool Holder 3/4" / 1" or 20/25mm ouble 3/4" or 20mm ouble 3/4", 1" 20 or 25mm Right-Hand 3/4", 1" 20 or 25mm eft-hand Plug ouble or ouble ong (shown) Reversible (shown) or Reversible ong Cut-Off C C B A C A ER11 and ER20 Collet Angular Adjustable ool Holders Cross Mill/rill Int. Coolant or Ext. Coolant ER25 Collet riven ool Holders End Mill/rill Right-Hand Int. Coolant or Ext. Coolant End Mill/rill eft-hand Int. Coolant or Ext. Coolant End Mill/rill ouble Spindle Reversible Polygon urning riven ool Holder C B A C VI 30 Page Numbers - VI 40 Page Numbers A - Used for machining on the main spindle B - Used for machining on sub-spindle option only C - Used for machining on both or either spindle - Used for machining on either spindle All marks indicated by and are trademarks of

3 VI 40 urret ooling System Hardinge-EMAG V3/V5 VI oolholders Page 3 VI 40 Square Shank ool Holders 1" or 25mm ouble 1" or 25mm Radial/Axial 1" or 25mm Radial, eft-hand 1" or 25mm Axial, Right-Hand 1" or 25mm Axial, eft-hand Plug ER32 Collet ool Holders Round Shank ool Holders Round Shank Internal Coolant Round Shank External Coolant Round Shank Internal Coolant ER32 Collet riven ool Holders End Mill/rill Internal/External Coolant End Mill/rill External Coolant Cross Mill/rill External Coolant Cross Mill/rill Internal/External Coolant Page Numbers urret (12-Station) All marks indicated by and are trademarks of

4 VI oolholders Page 4 VI 30 urret ooling System QUES winurn 65 VI 30 Round Shank ool Holders 3/4" or 20mm Right-Hand, 2-Hole 3/4" or 20mm eft-hand, 2-Hole 1-1/4" or 32mm Right-Hand, ong Offset 1-1/4" or 32mm Right-Hand Offset 1-1/4" or 32mm eft-hand, ong Offset 1-1/4" or 32mm eft-hand Offset 3/4", 1", 1-1/4", 20mm, 25mm or 32mm ong 3/4", 1", 1-1/4", 20mm, 25mm or 32mm 1/2" or 12mm Y-Axis /4" or 20mm ouble 3/4" or 20mm Right-Hand Y-Axis Square Shank ool Holders 3/4" or 20mm Right-Hand 3/4" or 20mm eft-hand 3/4" or 20mm eft-hand Y-Axis Plug ER25 Collet ool Holders ouble or ouble ong Reversible or Reversible ong Miscellaneous ool Holders Gripper for Part Catcher A, B Cut-Off A, C ER11 Collet Angular Adjustable ool Holder ER20 Collet Angular Adjustable ool Holder ER25 Collet riven ool Holders Cross Mill/rill Int. Coolant or Ext. Coolant End Mill/rill Right-Hand Int. Coolant or Ext. Coolant End Mill/rill eft-hand Int. Coolant or Ext. Coolant End Mill/rill ouble Spindle Ext. Coolant Page Numbers A - Shown positioned 90-degrees clockwise for clarity B - Used on lower turret only C - Used on upper turret only Upper urret (10- or 12-Station) ower urret (10- or 12-Station) All marks indicated by and are trademarks of

5 VI 30 urret ooling System EIE 8/51 VI oolholders Page 5 urret op Plate 3/4" or 20mm eft-hand, 2-Hole 1-1/4" or 32mm eft-hand, ong Offset VI 30 Round Shank ool Holders 1-1/4" or 32mm eft-hand Offset 3/4", 1", 1-1/4", 1-1/2" 20mm, 25mm, 32mm or 40mm ong 3/4", 1", 1-1/4", 1-1/2" 20mm, 25mm, 32mm or 40mm ER25 Collet ool Holders Reversible (shown) or Reversible ong Square Shank ool Holders 3/4", 1" 20 or 25mm eft-hand Plug ER16 Collet Angular Adjustable ool Holder ER25 Collet riven ool Holders Cross Mill/rill Ext. Coolant End Mill/rill eft-hand Int./Ext. Coolant Polygon urning riven ool Holder Page Numbers All marks indicated by and are trademarks of

6 VI oolholders Page 6 Square Shank ool Holders: eft- & Right-hand H1 H S 1 1 EIE 8/51 - VI 30 eft-hand oolholder Shown Right-Hand Mirror Image ool Shank Center Center Shank ia. ength Height Width Height Shoulder Part Number Style H H1 1 1 S X X X A H.750" 1.181" 2.559" 2.992" 1.654" 1.654" 1.339" 1.358" 2.756".866" (19.05) (30) (65) (76) (42) (42) (34) (35) (70) (22) X X A RH.750" 1.181" 2.559" 2.992" 1.654" 1.654" 1.339" 1.358" 2.756".866" (19.05) (30) (65) (76) (42) (42) (34) (35) (70) (22) X X X A H.787" 1.181" 2.559" 2.992" 1.654" 1.654" 1.339" 1.358" 2.756".866" (20) (30) (65) (76) (42) (42) (34) (35) (70) (22) X X A RH.787" 1.181" 2.559" 2.992" 1.654" 1.654" 1.339" 1.358" 2.756".866" (20) (30) (65) (76) (42) (42) (34) (35) (70) (22) All marks indicated by and are trademarks of

7 Square Shank ool Holders VI oolholders Page 7 * Axial urning 2 1 W W1.315" 8mm ool W H2 H3 H1 H 2.079" 2mm eft-hand oolholder Shown Right-Hand Mirror Image Shank Shank ia. ength Width Height Part Number Style W W1 W2 H H1 H2 H3 X X HE E H 1.000" 1.339" 1.574" 3.346" 1.181".492" 3.543" 1.870" 1.004" 1.889" 1.280" 1.280" 2.657" (25.4) (34) (40) (85) (30) (12.5) (90) (47.5) (25.5) (48) (32.5) (32.5) (67.5) X X HE H.984".787" 1.339" 1.574" 3.346" 1.181".492" 3.543" 1.870" 1.004" 1.889" 1.280" 1.280" 2.657" (25) (20) (34) (40) (85) (30) (12.5) (90) (47.5) (25.5) (48) (32.5) (32.5) (67.5) X HE ER RH 1.000" 1.339" 1.574" 3.346" 1.181".492" 3.346" 1.673".807" 1.889" 1.280" 1.280" 2.657" (25.4) (34) (40) (85) (30) (12.5) (85) (42.5) (20.5) (48) (32.5) (32.5) (67.5) * wo shims included with each tool holder. 1 Axial urning Inverted.315" 8mm 15 2 W1 W W2 ool 15 H2 H3 H.079" 2mm H1 2 eft-hand oolholder Shown Right-Hand Mirror Image Shank Shank ia. ength Width Height Part Number Style W W1 W2 H H1 H2 H3 X X QC H 1.000" 1.339" 1.574" 3.346" 1.181".492" 3.543" 1.870" 1.004" 1.889" 1.280" 1.280" 2.657" (25.4) (34) (40) (85) (30) (12.5) (90) (47.5) (25.5) (48) (32.5) (32.5) (67.5) X QC RH 1.000" 1.339" 1.574" 3.346" 1.181".492" 3.346" 1.673".807" 1.889" 1.280" 1.280" 2.657" (25.4) (34) (40) (85) (30) (12.5) (85) (42.5) (20.5) (48) (32.5) (32.5) (67.5) 1 All marks indicated by and are trademarks of

8 VI oolholders Page 8 Square Shank ool Holders Radial urning eft Hand W S 15 1 * H1 H H2 15 H3 H4 ool Shank Center Shank ia. ength Width Width Height Step Part Number W H H1 H2 H3 H4 S X HE E 1.000" 1.339" 1.574" 1.732".866" 3.346" 1.673" 1.889" 1.280".079" 1.378" 2.756".492" (25.4) (34) (40) (44) (22) (85) (42.5) (48) (32.5) (2) (35) (70) (12.5) X HE ".787" 1.339" 1.574" 1.732".866" 3.346" 1.673" 1.889" 1.280".079" 1.378" 2.756".492" (25) (20) (34) (40) (44) (22) (85) (42.5) (48) (32.5) (2) (35) (70) (12.5) * wo shims included with each tool holder. 2 1 Radial/Axial urning H H1 1 ool W eft-hand oolholder Shown Right-Hand Mirror Image Shank Shank ia. ength Width Height Part Number Style 1 W H H1 X HE E H 1.000" 1.574" 3.937".866" 3.543" 1.889" 1.280" (25.4) (40) (100) (22) (90) (48) (32.5) X HE H.984" 1.574" 3.937".866" 3.543" 1.889" 1.280" (25) (40) (100) (22) (90) (48) (32.5) X HE ER RH 1.000" 1.574" 3.937".866" 3.543" 1.889" 1.280" (25.4) (40) (100) (22) (90) (48) (32.5) All marks indicated by and are trademarks of

9 Square Shank ool Holders: eft- & Right-hand Y-Axis VI oolholders Page 9 H1 H 1 S 1 eft-hand oolholder Shown Right-Hand Mirror Image ool Shank Center Center Shank ia. ength Height Width Height Shoulder Part Number Style H H1 1 1 S X A Y H.750" 1.181" 1.772" 2.992" 1.654" 1.654" 1.339" 1.358" 2.756".866" (19.05) (30) (45) (76) (42) (42) (34) (35) (70) (22) X A Y RH.750" 1.181" 1.772" 2.992" 1.654" 1.654" 1.339" 1.358" 2.756".866" (19.05) (30) (45) (76) (42) (42) (34) (35) (70) (22) X A Y H.787" 1.181" 1.772" 2.992" 1.654" 1.654" 1.339" 1.358" 2.756".866" (20) (30) (45) (76) (42) (42) (34) (35) (70) (22) X A Y RH.787" 1.181" 1.772" 2.992" 1.654" 1.654" 1.339" 1.358" 2.756".866" (20) (30) (45) (76) (42) (42) (34) (35) (70) (22) All marks indicated by and are trademarks of

10 VI oolholders Page 10 Square Shank ool Holders: eft- & Right-hand H H1 H2 W W EIE 8/51 - VI 30 eft-hand oolholder Shown Right-Hand Mirror Image ool Shank Shank ia. ength Height Width Part Number Style H H1 H2 W W1 X X QC H 1.000" 1.181" 2.756" 1.358" 1.890" 1.358" 1.811" 1.378" (25.4) (30) (70) (34.5) (48) (34.5) (46) (35) X X QC H.984" 1.181" 2.756" 1.358" 1.890" 1.358" 1.811" 1.378" (25) (30) (70) (34.5) (48) (34.5) (46) (35) X QC R RH 1.000" 1.181" 2.756" 1.358" 1.890" 1.358" 1.811" 1.378" (25.4) (30) (70) (34.5) (48) (34.5) (46) (35) X QC R RH.984" 1.181" 2.756" 1.358" 1.890" 1.358" 1.811" 1.378" (25) (30) (70) (34.5) (48) (34.5) (46) (35) All marks indicated by and are trademarks of

11 Square Shank ool Holders: ouble VI oolholders Page 11 1 ool Shank Center Center Shank ia. ength Height Width Height Part Number Style H 1 X X A B.750" 1.181" 2.559" 2.756" 1.654" 3.308" 1.358" (19.05) (30) (65) (75) (42) (84) (35) X X A B.787" 1.181" 2.559" 2.756" 1.654" 3.308" 1.358" (20) (30) (65) (75) (42) (84) (35) H H1 H ool Shank Center Shank ia. Height Width Part Number H H1 H2 H X QC " 1.000" 1.500".750" 1.181" 3.778" 1.889" 1.358" 2.716" 4.880" 1.579".787" 1.653" 1.653" (50.8) (25.4) (38.1) (19.05) (30) (96) (48) (34.5) (69) (124) (40) (20) (42) (42) X QC ".984" 1.574".787" 1.181" 3.778" 1.889" 1.358" 2.716" 4.880" 1.579".787" 1.653" 1.653" (50) (25) (40) (20) (30) (96) (48) (34.5) (69) (124) (40) (20) (42) (42) H2 H3 All marks indicated by and are trademarks of

12 VI oolholders Page 12 Square Shank ool Holders: ouble W1 H1 H 1 W 1 ool Shank Shank ia. Width Height Part Number 1 1 W W1 H H1 X X HE E 1.000" 1.339" 1.574" 2.835" 1.969" 3.681" 1.870" 1.890" 3.169" (25.4) (34) (40) (72) (50) (93.5) (47.5) (48) (80.5) X X HE " 1.339" 1.574" 2.835" 1.969" 3.681" 1.870" 1.890" 3.169" (25) (34) (40) (72) (50) (93.5) (47.5) (48) (80.5) All marks indicated by and are trademarks of

13 Plugs & Cut-Off ool Holder VI oolholders Page 13 Plug H EIE 8/51 - VI 30 S Shank Hub Center ia. ia. Height Shoulder Part Number H 1 S X X X " 2.677" 1.102" 1.181".630" (30) (68) (28) (30) (16) X X HE " 3.267" 1.279".787" (40) (83) (32.5) (20) 1 Cut-Off 2 1 H H1 1 NOE: Used on upper turret only for QUES " maximum cut-off diameter Side to ool ool Blade Shank Center Center Center Gauge Center ength Height Height ia. ength Width Holder Height ength Part Number Style H H G X X B H 1.378" 4.134".843" 1.024" 1.181" 2.992" 1.575" 3.150".787" 1.693" 3.386".787" (35) (105) (21.4) (26) (30) (76) (42) (80) (20) (43) (86) (20) All marks indicated by and are trademarks of

14 VI oolholders Page 14 Round Shank ool Holders: External Coolant External Coolant 2 S 1 F 1 H * * * * ool Shank ia. ia. ength Screw hread Part Number F S H X HE " 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (8) (40) (55) (83) (75) (61) (22) (32.5) X HE " 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (10) (40) (55) (83) (75) (61) (22) (32.5) X HE E.375" 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (9.52) (40) (55) (83) (75) (61) (22) (32.5) X HE " 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (12) (40) (55) (83) (75) (61) (22) (32.5) X HE E.500" 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (12.70) (40) (55) (83) (75) (61) (22) (32.5) X HE " 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (16) (40) (55) (83) (75) (61) (22) (32.5) X HE E.625" 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (15.87) (40) (55) (83) (75) (61) (22) (32.5) X HE " 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (20) (40) (55) (83) (75) (61) (22) (32.5) X HE E.750" 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (19.05) (40) (55) (83) (75) (61) (22) (32.5) X HE " 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (25) (40) (55) (83) (75) (61) (22) (32.5) X HE E 1.000" 1.574" 2.165" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (25.4) (40) (55) (83) (75) (61) (22) (32.5) X HE " 1.574" 3.268" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (32) (40) (76) (83) (75) (61) (22) (32.5) X HE E 1.250" 1.574" 3.268" 3.268" 2.952" 2.401".866" 1.280" M8 M22x1.5 (31.75) (40) (76) (83) (75) (61) (22) (32.5) X HE " 1.574" 3.268" 3.268" 2.952" 2.992".866" 1.280" M8 M22x1.5 (40) (40) (76) (83) (75) (76) (22) (32.5) X HE E 1.500" 1.574" 3.268" 3.268" 2.952" 2.992".866" 1.280" M8 M22x1.5 (38.1) (40) (76) (83) (75) (76) (22) (32.5) * Slotted bushings can be found in the last few pages of this brochure. 2 All marks indicated by and are trademarks of

15 Round Shank ool Holders: Internal Coolant VI oolholders Page 15 Internal Coolant F 1 S 2 * * ool Shank ia. ia. ength Screw Part Number F S X HE " 1.574" 2.125" 3.267" 2.637" 2.125".866" 1.377" 1.280" (16) (40) (54) (83) (67) (54) (22) (35) (32.5) X HE " 1.574" 2.125" 3.267" 2.637" 2.125".866" 1.377" 1.280" (20) (40) (54) (83) (67) (54) (22) (35) (32.5) X HE " 1.574" 2.480" 3.267" 2.952" 2.322".866" 1.574" 1.280" (25) (40) (63) (83) (75) (59) (22) (40) (32.5) X HE " 1.574" 2.716" 3.267" 2.952" 2.480".866" 1.732" 1.280" (32) (40) (69) (83) (75) (63) (22) (44) (32.5) X HE " 1.574" 2.992" 3.267" 3.543" 2.874".866" 2.125" 1.280" (40) (40) (76) (83) (90) (73) (22) (54) (32.5) * Slotted bushings can be found in the last few pages of this brochure. All marks indicated by and are trademarks of

16 VI oolholders Page 16 Round Shank ool Holders: 1 /2" & 12mm Y-Axis C NOE: One straight nozzle is included with each tool holder. Refer to page 38 for straight & 90 nozzles. Used on upper turret only for QUES 65 ool ool ool Shank Center Center ia. ength Center ia. ength Width Height Part Number C X A A.500" 5.000" 2.717" 1.181" 3.059" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" 1.004" (12.7) (127) (69) (30) (77.7) (35) (35) (44.2) (53) (34.5) (69) (25.5) (25.5) X A A.472" 5.000" 2.717" 1.181" 3.059" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" 1.004" (12) (127) (69) (30) (77.7) (35) (35) (44.2) (53) (34.5) (69) (25.5) (25.5) All marks indicated by and are trademarks of

17 Round Shank ool Holders: Standard & ong VI oolholders Page C * * * * EIE 8/51 - VI 30 ool ool Shank Center Center Center Center Center Center Center ia. Center ia. ength ocator Width Width Width Height Height Height Part Number Style C &3 X X X A A Std..750" 2.756" 1.181" 3.583" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (19.05) (70) (30) (91) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A ong.750" 3.465" 1.181" 4.291" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (19.05) (88) (30) (109) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A Std..787" 2.756" 1.181" 3.583" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (20mm) (70) (30) (91) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A ong.787" 3.465" 1.181" 4.291" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (20mm) (88) (30) (109) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A Std " 2.756" 1.181" 3.583" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (25.4) (70) (30) (91) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A ong 1.000" 3.465" 1.181" 4.291" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (25.4) (88) (30) (109) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A Std..984" 2.756" 1.181" 3.583" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (25mm) (70) (30) (91) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A ong.984" 3.465" 1.181" 4.291" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (25mm) (88) (30) (109) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A Std " 2.756" 1.181" 3.583" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (31.75) (70) (30) (91) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A ong 1.250" 3.465" 1.181" 4.291" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (31.75) (88) (30) (109) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A Std " 2.756" 1.181" 3.583" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (32mm) (70) (30) (91) (35) (35) (44.2) (53) (34.5) (69) (25.5) X X X A A ong 1.260" 3.465" 1.181" 4.291" 1.378" 1.378" 1.740" 2.087" 1.358" 2.716" 1.004" (32mm) (88) (30) (109) (35) (35) (44.2) (53) (34.5) (69) (25.5) X QC ong 1.250" 4.331" 1.181" 5.160" 1.378" 1.398" 1.713" 2.087" 1.358" 2.716" 1.004" (31.75) (110) (30) (131) (35) (35.5) (43.5) (53) (34.5) (69) (25.5) X QC ong 1.260" 4.331" 1.181" 5.160" 1.378" 1.398" 1.713" 2.087" 1.358" 2.716" 1.004" (32mm) (110) (30) (131) (35) (35.5) (43.5) (53) (34.5) (69) (25.5) * Slotted bushings can be found on the last few pages of this brochure. esigned for use on QUES 6/42 machines; may be used on QUES 8/51 and 10/65 lathes. All marks indicated by and are trademarks of NOE: One straight nozzle is included with each tool holder. Refer to page 38 for straight & 90 nozzles.

18 VI oolholders Page 18 Round Shank ool Holders: eft/right-hand & ong Offset S For RH Holders C 1 EIE 8/51 - VI 30 eft-hand oolholder Shown Right-Hand Mirror Image NOE: One straight nozzle is included with each tool holder. Refer to page 35 for straight & 90 nozzles and the last few pages of this brochure for slotted bushings. ool ool Shank Center Center Center Center Center Center ia. Center ia. ength ocator Width Width Width Height Height Step Part Number Style C S X X X A A H 1.250" " 3.622" 1.378" 1.378" 2.362" 2.724" 1.358" 2.716" 1.181" (31.75) (70) (30) (92) (35) (35) (60) (69.2) (34.5) (69) (30) X X X A A H 1.250" " 4.331" 1.378" 1.378" 2.362" 2.724" 1.358" 2.716" 1.181" (31.75) (88) (30) (110) (35) (35) (60) (69.2) (34.5) (69) (30) X X A A RH 1.250" " 3.622" 1.378" 1.378" 2.362" 2.724" 1.358" 2.716" 1.181" (31.75) (70) (30) (92) (35) (35) (60) (69.2) (34.5) (69) (30) X X A A RH 1.250" " 4.331" 1.378" 1.378" 2.362" 2.724" 1.358" 2.716" 1.181" (31.75) (88) (30) (110) (35) (35) (60) (69.2) (34.5) (69) (30) X X X A A H 1.260" " 3.622" 1.378" 1.378" 2.362" 2.724" 1.358" 2.716" 1.181" (32mm) (70) (30) (92) (35) (35) (60) (69.2) (34.5) (69) (30) X X X A A H 1.260" " 4.331" 1.378" 1.378" 2.362" 2.724" 1.358" 2.716" 1.181" (32mm) (88) (30) (110) (35) (35) (60) (69.2) (34.5) (69) (30) X X A A RH 1.260" " 3.622" 1.378" 1.378" 2.362" 2.724" 1.358" 2.716" 1.181" (32mm) (70) (30) (92) (35) (35) (60) (69.2) (34.5) (69) (30) X X A A RH 1.260" " 4.331" 1.378" 1.378" 2.362" 2.724" 1.358" 2.716" 1.181" (32mm) (88) (30) (110) (35) (35) (60) (69.2) (34.5) (69) (30) All marks indicated by and are trademarks of

19 Round Shank ool Holders: 2-Hole, 3 /4" eft- & Right-hand VI oolholders Page 19 RH Holders W3 W2 C1 C NOE: One straight nozzle is included with each tool holder. Refer to page 35 for straight & 90 nozzles and the last few pages of this brochure for slotted bushings. EIE 8/51 - VI 30 eft-hand oolholder Shown Right-Hand Mirror Image 1st 2nd ool ool ool Shank Center Center Center Center Center Center ia. Center Center ia. ength ocator Width Width Height Height Height Part Number Style C C1 W1 W2 1 2&3 X X X A H.750" 2.717" 3.780" 1.181" 4.331" 1.378" 1.890" 2.165" 1.358" 2.716".984" (19.05) (69) (96) (30) (110) (35) (48) (55) (34.5) (69) (34.5) X X A RH.750" 2.717" 3.780" 1.181" 4.331" 1.378" 1.890" 2.165" 1.358" 2.716".984" (19.05) (69) (96) (30) (110) (35) (48) (55) (34.5) (69) (34.5) X X X A H.787" 2.717" 3.780" 1.181" 4.331" 1.378" 1.890" 2.165" 1.358" 2.716".984" (20) (69) (96) (30) (110) (35) (48) (55) (34.5) (69) (34.5) X X A RH.787" 2.717" 3.780" 1.181" 4.331" 1.378" 1.890" 2.165" 1.358" 2.716".984" (20) (69) (96) (30) (110) (35) (48) (55) (34.5) (69) (34.5) All marks indicated by and are trademarks of

20 VI oolholders Page 20 Round Shank ool Holders: 1 1 /2" & 40mm 1 H1 H EIE 8/51 - VI 30 NOE: his holder cannot be used on the sub-spindle for QUES 6/42, 8/51 and 10/65 machines. Refer to the last few pages of this brochure for slotted bushings. Shank ool Center ia. ia. ength Height Width Part Number Style 1 H H1 1 2 X X QC Std 1.181" 1.575" 2.756" 1.397" 2.716" 1.358" 3.109" 1.712" 1.397" (30) (40) (70) (35.5) (69) (34.5) (79) (43.5) (35.5) X X QC ong 1.181" 1.575" 3.543" 1.397" 2.716" 1.358" 3.109" 1.712" 1.397" (30) (40) (90) (35.5) (69) (34.5) (79) (43.5) (35.5) X X QC Std " 1.500" 2.756" 1.397" 2.716" 1.358" 3.109" 1.712" 1.397" (30) (38) (70) (35.5) (69) (34.5) (79) (43.5) (35.5) X X QC ong 1.181" 1.500" 3.543" 1.397" 2.716" 1.358" 3.109" 1.712" 1.397" (30) (38) (90) (35.5) (69) (34.5) (79) (43.5) (35.5) X QC Std " 1.575" 3.151" 1.377" 3.151" 1.575" 3.623" 1.969" 1.654" (40) (40) (80) (35) (80) (40) (92) (50) (42) X QC ong 1.575" 1.575" 4.331" 1.377" 3.151" 1.575" 3.623" 1.969" 1.654" (40) (40) (110) (35) (80) (40) (92) (50) (42) X QC Std " 1.500" 3.151" 1.377" 3.151" 1.575" 3.623" 1.969" 1.654" (40) (38) (80) (35) (80) (40) (92) (50) (42) X QC ong 1.575" 1.500" 4.331" 1.377" 3.151" 1.575" 3.623" 1.969" 1.654" (40) (38) (110) (35) (80) (40) (92) (50) (42) All marks indicated by and are trademarks of

21 ool Holders: ER32 Collet & Gripper/Catcher VI oolholders Page 21 Internal Coolant 2 F 1 B Collet Shank 1 2 NOE: Refer to the last few pages of this brochure for ER collets and tap collets. Bore ia. ength Part Number Style Collet 1 2 F 1 2 H X HE ER 3 32"- 3 4" ER " 1.968" 3.268" 1.280" 2.952" 2.480".866" 5 8"-18 (2-20) (40) (50) (83) 32.5 (75) (63) (22) Gripper/Catcher 1 2 CO C UC F F1 3 W1 W G ;y;y;y;y;y;y;y;y P NOE: Used on lower turret only for QUES 65. One set of machinable nylon pads is included. Replacement pad part numbers are and (1 each required). Shank Max. Center ia. Open Height Height ength Part Number CO F F1 G 1&2 3 P C UC W W1 X A ".394".472" 3.937" 2.593" 1.378" 2.087" 3.780" 3.000" 2.953" 5.197" 3.425" 2.717" (30) (10) (12) (100) (75) (35) (53) (96) (76.2) (75) (132) (87) (69) All marks indicated by and are trademarks of

22 VI oolholders Page 22 ool Holders: ER25 Collet Reversible Standard & ong 1 Max. 2 C S 1 EIE 8/51 - VI 30 NOE: One straight nozzle is included with each tool holder. Refer to page 38 for straight & 90 nozzles and the last few pages of this brochure for ER collets, tap collets and ER25 setting bar. Collet ool Shank Center Center Center Center Center Bore Center ia. ength ocator Width Width Height Height Step Part Number Style Collet C S X X X A Std. 1 16"- 5 8" ER " 1.181" 3.622" 1.378" 1.988" 2.087" 1.319" 2.638" 1.732" (1-16) (70) (30) (92) (35) (50.5) (53) (33.5) (67) (44) X X X A ong 1 16"- 5 8" ER " 1.181" 4.331" 1.378" 1.988" 2.087" 1.319" 2.638" 2.441" (1-16) (88) (30) (110) (35) (50.5) (53) (33.5) (67) (62) All marks indicated by and are trademarks of

23 ool Holders: ER25 Collet Standard & ong VI oolholders Page 23 Max. 1 Max. 2 3 C S 1 NOE: One straight nozzle is included with each tool holder. Refer to page 38 for straight & 90 nozzles and the last few pages of this brochure for ER collets, tap collets and ER25 setting bar. Collet ool Shank Center Center Center Center Center Bore Center ia. ength ocator Width Width Height Height Step Part Number Style Collet C 1&2 3 1 S X X A Std. 1 16"- 5 8" ER " 1.181" 3.622" 1.378" 1.988" 2.087" 1.319" 2.638".1.732" (1-16) (70) (30) (92) (35) (50.5) (53) (33.5) (67) (44) X X A ong 1 16"- 5 8" ER " 1.181" 4.331" 1.378" 1.988" 2.087" 1.319" 2.638" 2.441" (1-16) (88) (30) (110) (35) (50.5) (53) (33.5) (67) (62) All marks indicated by and are trademarks of

24 VI oolholders Page 24 ool Holders: ER25/32/40 with Interchangeable Heads Interchangeble Heads ER Inserts must be purchased separately. See dimensions and part numbers to the right. ER40 Insert QC I40 =.118 to 1.024" 3 to 26mm Ø1.969" 50mm Ø2.482" 63mm " 32mm.472" 12mm 1.850" 47mm Max ER32 Insert QC I32 =.079 to.787" 2 to 20mm C Ø1.969" 50mm Ø1.970" 50mm ER25 Insert QC I " 32mm.472" 12mm 1.772" 45mm Max =.032 to.625" 1 to 16mm 2 Ø1.969" 50mm 1.260" 32mm.472" 12mm 1.654" 42mm Max Ø1.655" 42mm Standard-ength oolholder Shown NOE: One 3.9"/100mm straight copper nozzle is included with each tool holder (part number QC ). Refer to the last few pages of this brochure for ER collets, tap collets and ER25 setting bar. Collet ool Shank Center Center Center Center Bore Center ia. ength ocator Width Width Height Height Part Number Style Collet C X QC Std. See ER 3.149" 1.575" 4.526" 1.654" 1.299" 3.308" 1.575" 3.15" Illus. (80) (40) (115) (42) (33) (84) (40) (80) X QC ong See ER 4.331" 1.575" 5.708" 1.654" 1.299" 3.308" 1.575" 3.15" Illus. (110) (40) (145) (42) (33) (84) (40) (80) All marks indicated by and are trademarks of

25 riven ool Holders: ER32 End-Working VI oolholders Page 25 External Coolant NOE: Coolant must be fed continuously through internal coolant holders. Refer to the last few pages of this brochure for ER collets & tap collets. Collet Shank Max. Bore ia. Coolant Part Number Style Collet RPM orque Ratio Psi X X HE ER 3 32"- 3 4" ER " 3.465" ft-lb 1: psi (2-20) (40) (88) 50 Nm 70 bar Internal & External Coolant NOE: Coolant must be fed continuously through internal coolant holders. Refer to the last few pages of this brochure for ER collets & tap collets. Collet Shank Max. Bore ia. Coolant Part Number Style Collet RPM orque Ratio Psi X X HE ER 3 32"- 3 4" ER " 3.465" ft-lb 1: psi (2-20) (40) (88) 50 Nm 70 bar All marks indicated by and are trademarks of

26 VI oolholders Page 26 riven ool Holders: ER32 Collet Cross-Working External or Internal & External Coolant 1 NOE: Coolant must be fed continuously through internal coolant holders. Refer to the last few pages of this brochure for ER collets & tap collets. Collet Shank Max. Bore ia. Coolant Part Number Style Collet 1 RPM orque Ratio Psi X HE ER 3 32"- 3 4" ER " 4.606" 2.953" 1.102" ft-lb 1:1 1015psi (External Only) (2-20) (40) (117) (75) (28) 80 Nm 70 bar X HE ER 3 32"- 3 4" ER " 3.465" 2.953" 1.102" ft-lb 1:1 1015psi (Int. & Ext.) (2-20) (40) (117) (75) (28) 80 Nm 70 bar All marks indicated by and are trademarks of

27 riven ool Holders: eft-/right-hand End-Working VI oolholders Page 27 Internal or External Coolant 1 Picture shows orientation to main spindle. Input rotation is opposite to output rotation. M 52/54 M 51/53 W1 W2 For internal coolant only H2 H eft-hand oolholder Shown Right-Hand Mirror Image NOE: Coolant must be fed continuously through internal coolant holders. Refer to the last few pages of this brochure for ER collets and tap collets. Collet Shank Max. Bore ia. Coolant Part Number Collet 1 W1 W2 H H1 orque Ratio Psi X QCA AG 1 16"- 5 8" ER " 3.740" 2.755" 2.559" 1.377" 2.558" 1.279" ft-lb 1:1 1000psi (Main Spindle - Ext. Coolant) (1-16) (30) (95) (70) (65) (35) (65) (32.5) 20 Nm 70 bar X QCA AG 1 16"- 5 8" ER " 3.740" 2.755" 2.559" 1.377" 2.047" 2.558" 1.279" ft-lb 1:1 350psi (Main Spindle - Int. Coolant) (1-16) (30) (95) (70) (65) (35) (52) (65) (32.5) 20 Nm 25 bar X QCA AG 1 16"- 5 8" ER " 3.740" 2.755" 2.559" 1.377" 2.558" 1.279" ft-lb 1:1 1000psi (Sub Spindle - Ext. Coolant) (1-16) (30) (95) (70) (65) (35) (65) (32.5) 20 Nm 70 bar X QCA AG 1 16"- 5 8" ER " 3.740" 2.755" 2.559" 1.377" 2.047" 2.558" 1.279" ft-lb 1:1 350psi (Sub Spindle - Int. Coolant) (1-16) (30) (95) (70) (65) (35) (52) (65) (32.5) 20 Nm 25 bar X QC AG 3 32"- 3 4" ER " 5.000" 3.543" 3.307" 1.929" 1.831" 3.150" 1.575" ft-lb 1:1 1000psi (Main Spindle - Ext. Coolant) (2-20) (40) (127) (90) (84) (49) (46.5) (80) (40) 50 Nm 70 bar X QC AG 3 32"- 3 4" ER " 5.000" 3.543" 3.307" 1.929" 2.756" 3.150" 1.575" ft-lb 1:1 350psi (Main Spindle - Int. Coolant) (2-20) (40) (127) (90) (84) (49) (70) (80) (40) 50 Nm 25 bar X QC AG 3 32"- 3 4" ER " 5.000" 3.543" 3.307" 1.929" 1.831" 3.150" 1.575" ft-lb 1:1 1000psi (Sub Spindle - Ext. Coolant) (2-20) (40) (127) (90) (84) (49) (46.5) (80) (40) 50 Nm 70 bar X QCA AG 3 32"- 3 4" ER " 5.000" 3.543" 3.307" 1.929" 2.756" 3.150" 1.575" ft-lb 1:1 350psi (Sub Spindle - Int. Coolant) (2-20) (40) (127) (90) (84) (49) (70) (80) (40) 50 Nm 25 bar All marks indicated by and are trademarks of

28 VI oolholders Page 28 riven ool Holders: eft-hand End-Working Internal & External Coolant 2 1 C NOE: Refer to the last few pages of this brochure for ER collets and tap collets. EIE 8/51 - VI 30 Collet ool Shank Center Center Center Max. Bore Center ia. ength Height ocator Width Coolant Part Number Style Collet C 1 2 Psi X M H 1 16"- 5 8" ER " 1.181" 4.567" 2.520" 1.270" 2.599" 2.500" 363 psi (1-16) (85) (30) (116) (64) (32) (66) (63.5) 25 bar All marks indicated by and are trademarks of

29 riven ool Holders: eft-/right-hand End-Working VI oolholders Page 29 External Coolant C 2 1 Max. NOE: Coolant must be fed continuously through internal coolant holders. Refer to the last few pages of this brochure for ER collets and tap collets. Right-Hand oolholder Shown eft-hand Mirror Image Collet ool Shank Center Center Center Bore Center ia. ength Height ocator Width Part Number Style Collet C 1 2 X EG RH 1 16"- 5 8" ER " 1.181" 3.937" 2.717" 1.378" 2.953" 1.673" (1-16) (70) (30) (100) (69) (35) (75) (42.5) X EG H 1 16"- 5 8" ER " 1.181" 3.937" 2.717" 1.378" 2.953" 1.673" (1-16) (70) (30) (100) (69) (35) (75) (42.5) All marks indicated by and are trademarks of

30 VI oolholders Page 30 riven ool Holders: eft- or Right-Hand End-Working Internal Coolant C 2 1 NOE: Coolant must be fed continuously through internal coolant holders. Refer to the last few pages of this brochure for ER collets and tap collets. Right-Hand oolholder Shown eft-hand Mirror Image Collet ool Shank Center Center Center Max. Bore Center ia. ength Height ocator Width Coolant Part Number Style Collet C 1 2 Psi X EG RH 1 16"- 5 8" ER " 1.181" 3.937" 2.717" 1.378" 3.209" 2.165" 176 psi (1-16) (70) (30) (100) (69) (35) (81.5) (55) 12 bar X EG H 1 16"- 5 8" ER " 1.181" 3.937" 2.717" 1.378" 3.209" 2.165" 76 psi (1-16) (70) (30) (100) (69) (35) (81.5) (55) 12 bar All marks indicated by and are trademarks of

31 riven ool Holders: ER25 Cross-Working VI oolholders Page 31 External Coolant NOE: Refer to the last few pages of this brochure for ER collets and tap collets. Collet Shank Center Center Max. Bore ia. ength Height Width Coolant Part Number Style Collet Psi X EG ER 1 16"- 5 8" ER " 2.362" 1.500" 3.000" 1.500" 3.000" 176 psi (1-16) (30) (60) (38) (76) (38) (76) 12 bar Internal Coolant NOE: Coolant must be fed continuously through internal coolant holders. Refer to the last few pages of this brochure for ER collets and tap collets. Collet Shank Center Center Max. Bore ia. ength Height Width Coolant Part Number Style Collet Psi X EG ER 1 16"- 5 8" ER " 2.362" 1.500" 3.000" 1.500" 3.000" 176 psi (1-16) (30) (60) (38) (76) (38) (76) 12 bar All marks indicated by and are trademarks of

32 VI oolholders Page 32 riven ool Holders: ER25 Cross-Working External Coolant 1 EIE 8/51 - VI 30 1 Collet Shank Center Center Max. Bore ia. ength Width Height Coolant Part Number Collet orque Ratio Psi X M "- 5 8" ER " 2.540" 2.284" 2.441" 1.220" 2.520" 1.260" 23.6 ft-lb 1:1 1000psi (External Coolant) (1-16) (30) (64.5) (58) (69) (31) (64) (32) 32 Nm 70 bar 1 NOE: Refer to the last few pages of this brochure for ER collets and tap collets. Internal or External Coolant 1 Max. 1 Collet Shank Center Center Max. Bore ia. ength Width Height Coolant Part Number Collet orque Ratio Psi X QCA AG 1 16"- 5 8" ER " 3.818" 2.165" 2.716" 1.358" 2.754" 1.377" ft-lb 1:1 1000psi (External Coolant) (1-16) (30) (97) (55) (69) (34.5) (70) (35) 20 Nm 70 bar X QCA AG 1 16"- 5 8" ER " 3.818" 2.165" 2.716" 1.358" 2.754" 1.377" ft-lb 1:1 350psi (Internal Coolant) (1-16) (30) (97) (55) (69) (34.5) (70) (35) 20 Nm 25 bar 1 NOE: Coolant must be fed continuously through internal coolant holders. Refer to the last few pages of this brochure for ER collets and tap collets. All marks indicated by and are trademarks of

33 riven ool Holders: ouble-spindle End-Working VI oolholders Page 33 External Coolant C 1 2 NOE: Refer to the last few pages of this brochure for ER collets and tap collets. Collet ool Shank Center Center Center Center Max. Bore Center ia. ength Height ocator Width Width Coolant Part Number Style Collet C 1 2 Psi X EG ER 1 16"- 5 8" ER " 1.181" 4.213" 2.914" 1.378" 2.756" 5.512" 176 psi (1-16) (70) (30) (107) (74) (35) (70) (140) 12 bar External Coolant C Input rotation is equal to output rotation. M 51/53 M 52/54 NOE: Refer to the last few pages of this brochure for ER collets and tap collets. Max. 1 Max. W W1 Input rotation is opposite to output rotation. M 52/54 M 51/53 1 Collet Shank ool Center Center Max. Bore ia. Center ength Height Width Width Coolant Part Number Collet C 1 1 W W1 W2 W3 orque Ratio Psi X QC AG 1 16"- 5 8" ER " 2.755" 3.740" 2.558" 1.279" 6.062" 3.031" 1.811" 1.751" 1.397" 1.279" ft-lb 1:1 1000psi (External Coolant) (1-16) (30) (70) (95) (65) (32.5) (154) (77) (46) (44.5) (35.5) (32.5) 20 Nm 70 bar W2 W3 All marks indicated by and are trademarks of

34 VI oolholders Page 34 riven ool Holder: ER11 & ER20 Angular Adjustable External Coolant B 1 2 NOE: Refer to the last few pages of this brochure for ER collets and tap collets. ool Side to Collet Shank Center Center Center Center Bore ia. ength Width Height ength Part Number B Collet X AG 1.016" 1 16"- 1 4" ER " 3.150" 1.685" 1.181" 1.378" 1.280" 2.560" 1.496" 2.165" (25.8) (0.5-7) (30) (80) (42.8) (30) (35) (32.5) (65) (38) (55) External Coolant NOE: Refer to the last few pages of this brochure for ER collets and tap collets. 180 Input rotation is equal output rotation M 51/53 M 52/54 C 1 Collet Shank Center Center ool ool Bore ia. ength Height Width Center ength Part Number Collet C X QC AG 1 16"- 1 2" ER " 4.528" 1.339" 2.678" 1.969" 1.398" 1.280" 3.189" 2.579" (1-13) (30) (115) (34) (68) (50) (35.5) (32.5) (81) (65.5) X QC AG 1 16"- 1 4" ER " 4.528" 1.339" 2.678" 1.969" 1.398" 1.280" 3.189" 1.890" (0.5-7) (30) (115) (34) (68) (50) (35.5) (32.5) (81) (48) 1 2 All marks indicated by and are trademarks of

35 riven ool Holder: ER16 Angular Adjustable VI oolholders Page 35 External Coolant Input rotation is equal output rotation M 51/53 M 52/ C EIE 8/51 - VI 30 NOE: Refer to the last few pages of this brochure for ER collets and tap collets. Collet Shank Center Center ool ool Bore ia. Height Width Center ength Part Number Collet 1 1 C X M " " ER " 1.496" 2.776" 2.106" 1.280" 2.520" 2.126" (1.0-10) (30) (38) (70.5) (53.5) (32.5) (64) (54) All marks indicated by and are trademarks of

36 VI oolholders Page 36 riven ool Holder: ER20 Angular Adjustable Max C NOE: his holder occupies two tool stations on a 10-station turret; three tool stations on a 12-station turret. One turret plug (part no P) is included for adjacent station. Refer to the last few pages of this brochure for ER collets & tap collets. Collet Shank Center Center ool ool Bore ia. ength Height Width Center ength Part Number Collet C X EG 1 16"- 1 2" ER " 2.667" 2.441" 4.213" 4.685" 1.417" 2.953" 1.732" (1-13) (30) (68) (62) (107) (119 (36) (75) (44) All marks indicated by and are trademarks of

37 riven ool Holder: Polygon urning VI oolholders Page 37 External Coolant Picture shows orientation to main spindle. Input rotation is opposite to output rotation. M 52/54 M 51/ C NOE: For use on main or sub-spindle on QUES lathes. 1 Ø1.063" (27.0) Ø3.543" (90.0).635" (16.1) Ø1.063" (27.0) Ø3.543" (90.0).635" (16.1) Ø1.654" (42.0) Ø1.654" (42.0) 2-ooth Polygon Cutter (Part No. QC MAS2) 3-ooth Polygon Cutter (Part No. QC MAS3) Inserts apply to all Polygon holders. EIE 8/51 - VI 30 ool Shank Center Center Center Arbor ia. ength Height Width Part Number C X QC AG 2.760" 1.063" 1.181" 3.740" 2.560" 1.280" 2.950" 3.310" 4.870" (See Note A) (70.0) (27.0) (30.0) (95.0) (65.0) (32.5) (75.0) (84.0) (123.7) X M " 1.063" 1.181" 3.189" 2.520" 1.260" 3.248" 3.602" 5.177" (See Note B) (55.0) (27.0) (30.0) (81.0) (64.0) (32.0) (82.5) (91.5) (131.5) Note A: Part number QC AG is for the reversible Polygon Holder only. Use kit part number QC PK to order the holder, one 2-tooth polygon cutter, one 3-tooth polygon cutter, and a package of ten inserts (insert part number QC P). Note B: Part number M is for the Polygon Holder only. Use kit part number M PK to order the holder, one 2-tooth polygon cutter, one 3-tooth polygon cutter, and a package of ten inserts (insert part number QC P). All marks indicated by and are trademarks of

38 VI oolholders Page 38 ER25 Collet Setting Bar / Straight & 90 ool Holder Nozzles ER25 Setting Bar.500" 12.7mm.315" 8.0mm.630" 16.0mm ia " 26.0mm 3.340" 84.8mm NOE: his setting bar (part number ) is used to center boring bars in ER tool holders. 1 ength Part Number 1 X X " 5.440" (163.57) (138.17) 1 2 ength Part Number 1 2 X X " 5.560".910" (166.62) (141.22) (23.11) All marks indicated by and are trademarks of

39 HC Slotted Bushings for Round Shank ool Holders VI oolholders Page 39 HC-Style Solid Bushings have one or two longitudinal slots, depending on the size of the bore. he slot allows the set screw from the tool holder to locate directly on the body of the tool. he HC10 has a 1 1 4" or a 32mm O. he HC 12 has a 1 1 2" or a 40mm O. Both styles are available with fractional or metric size bores and with female Morse tapers. IN MERIC O & I MERIC O IN I HC10 Slotted - Fractional Part Number O Bore ecimal ength " 3 8".3750" 3.38" " 1 2".5000" 3.38" " 5 8".6250" 3.38" " 3 4".7500" 3.38" " 7 8".8750" 3.38" " 1" 1.000" 3.38" " 1 1 8" 1.125" 3.38" HC10 aper Hole - I Part Number O Size aper ength " #3 Morse 3.38" HC10M Slotted - Metric Part Number O Bore ecimal ength mm " 3.38" mm " 3.38" mm " 3.38" mm " 3.38" mm " 3.38" mm " 3.38" HC10M aper Hole - Metric Part Number O Size aper ength mm #2 Morse 3.38" mm #3 Morse 3.38" HC10M Slotted - Fractional Part Number O Bore ecimal ength mm 3 8".3870" 3.38" mm 1 2".5000" 3.38" mm 5 8".6250" 3.38" mm 3 4".7500" 3.38" mm 7 8".8750" 3.38" mm 1" " 3.38" HC12 Slotted - Fractional Part Number O Bore ecimal ength " 3 8".3750" 3.56" " 1 2".5000" 3.56" " 5 8".6250" 3.56" " 3 4".7500" 3.56" " 7 8".8750" 3.56" " 1" " 3.56" " 1 1 8" " 3.56" " 1 1 4" " 3.56" HC12 aper Hole - I Part Number O Size aper ength " #3 Morse 3.56" " #4 Morse 3.56" HC12M Slotted - Metric Part Number O Bore ecimal ength mm " 3.56" mm " 3.56" mm " 3.56" mm " 3.56" mm " 3.56" mm " 3.56" mm " 3.56" HC12M aper Hole - Metric Part Number O Size aper ength mm #2 Morse 3.56" mm #3 Morse 3.56" mm #4 Morse 3.56" HC12M Slotted - Fractional Part Number O Bore ecimal ength mm 1 2".5000" 3.56" mm 5 8".6250" 3.56" mm 3 4".7500" 3.56" mm 7 8".8750" 3.56" mm 1" " 3.56" mm 1 1 8" " 3.56" mm 1 1 4" " 3.56" All marks indicated by and are trademarks of

40 VI oolholders Page 40 HC Slotted Bushings for Round Shank ool Holders (Cont d.) IN O HC10 Slotted - Fractional Part Number O Bore ecimal ength " 3 8".3750" 2.95" " 1 2".5000" 2.95" " 5 8".6250" 2.95" " 3 4".7500" 2.95" " 7 8".8750" 2.95" " 1" " 2.95" HC10 Slotted - Fractional for Offset Holders Part Number O Bore ecimal ength " 3 8".3750" 2.55" " 1 2".5000" 2.55" " 5 8".6250" 2.55" " 3 4".7500" 2.55" " 7 8".8750" 2.55" " 1" " 2.55" MERIC O HC10M Slotted - Metric Part Number O Bore ecimal ength mm 8 mm.3149" 2.95" mm 10 mm.3937" 2.95" mm 12 mm.4724" 2.95" mm 16 mm.6299" 2.95" mm 20 mm.7874" 2.95" mm 25 mm.9842" 2.95" HC10M Slotted - Metric for Offset Holders Part Number O Bore ecimal ength mm 8 mm.3149" 2.55" mm 10 mm.3937" 2.55" mm 12 mm.4724" 2.55" mm 16 mm.6299" 2.55" mm 20 mm.7874" 2.55" mm 25 mm.9842" 2.55" IN O HC10V Slotted - Fractional Part Number O Bore ecimal ength " 3 8".3750" 2.63" " 1 2".5000" 2.63" " 5 8".6250" 2.63" " 3 4".7500" 2.63" " 7 8".8750" 2.63" " 1" " 2.63" " 1 1 8" " 2.63" HC12V Slotted - Fractional Part Number O Bore ecimal ength " 3 8".3750" 3.15" " 1 2".5000" 3.15" " 5 8".6250" 3.15" " 3 4".7500" 3.15" " 7 8".8750" 3.15" " 1" " 3.15" " 1 1 8" " 3.15" " 1 1 4" " 3.15" MERIC O HC10M -V Slotted - Metric Part Number O Bore ecimal ength mm 8 mm.3149" 2.63" mm 10 mm.3937" 2.63" mm 12 mm.4724" 2.63" mm 16 mm.6299" 2.63" mm 20 mm.7874" 2.63" mm 25 mm.9842" 2.63" HC12M-V Slotted - Metric Part Number O Bore ecimal ength mm " 3.15" mm " 3.15" mm " 3.15" mm " 3.15" mm " 3.15" mm " 3.15" mm " 3.15" MERIC O IN I HC10M -V Slotted - Fractional Part Number O Bore ecimal ength mm 3 8".3750" 2.63" mm 1 2".5000" 2.63" mm 5 8".6250" 2.63" mm 3 4".7500" 2.63" mm 1" " 2.63" HC12M-V Slotted - Fractional Part Number O Bore ecimal ength mm 1 2".5000" 3.15" mm 5 8".6250" 3.15" mm 3 4".7500" 3.15" mm 1" " 3.15" mm 1 1 8" " 3.15" mm 1 1 4" " 3.15" All marks indicated by and are trademarks of

41 HZ Slotted Bushings for Round Shank ool Holders VI oolholders Page 41 HZ-Style Solid Bushings feature one or two longitudinal slots, depending on the size of the bore. he slot allows the set screws from the tool holder to locate directly on the body of the tool. he bushing has a flange with two set screws 90 apart. he tool can be put in the bushing and set to a specific dimension from the locating shoulder and locked in place. he HZ10 bushing has a 1 1 4" or a 32mm O. he HZ12 bushing has a 1 1 2" or a 40mm O. Both bushings are available in metric or inch Os and/or Is. IN O MERIC O HZ10 Slotted - Fractional Part Number O Bore ecimal ength " 3 8".3750" 3.56" " 1 2".5000" 3.56" " 5 8".6250" 3.56" " 3 4".7500" 3.56" " 7 8".8750" 3.56" " 1" " 3.56" HZ10M Slotted - Metric Part Number O Bore ecimal ength mm 10 mm.3937" 3.56" mm 12 mm.4724" 3.56" mm 16 mm.6299" 3.56" mm 20 mm.7874" 3.56" mm 25 mm.9842" 3.56" HZ12 Slotted - Fractional Part Number O Bore ecimal ength " 3 8".3750" 3.87" " 1 2".5000" 3.87" " 5 8".6250" 3.87" " 3 4".7500" 3.87" " 7 8".8750" 3.87" " 1" " 3.87" " 1 1 4" " 3.87" HZ12M Slotted - Metric Part Number O Bore ecimal ength mm 10 mm.3937" 3.87" mm 12 mm.4724" 3.87" mm 16 mm.6299" 3.87" mm 20 mm.7874" 3.87" mm 25 mm.9842" 3.87" mm 32 mm " 3.87" IN O HZ10-V Slotted - Fractional Part Number O Bore ecimal ength " 3 8".3750" 2.94" " 1 2".5000" 2.94" " 5 8".6250" 2.94" " 3 4".7500" 2.94" " 7 8".8750" 2.94" " 1" " 2.94" HZ12-V Slotted - Fractional Part Number O Bore ecimal ength " 3 8".3750" 3.46" " 1 2".5000" 3.46" " 5 8".6250" 3.46" " 3 4".7500" 3.46" " 7 8".8750" 3.46" " 1" " 3.46" " 1 1 4" " 3.46" MERIC O HZ10M-V Slotted - Metric Part Number O Bore ecimal ength mm 10 mm.3937" 2.94" mm 12 mm.4724" 2.94" mm 16 mm.6299" 2.94" mm 20 mm.7874" 2.94" mm 25 mm.9842" 2.94" HZ12M-V Slotted - Metric Part Number O Bore ecimal ength mm 10 mm.3937" 3.46" mm 12 mm.4724" 3.46" mm 16 mm.6299" 3.46" mm 20 mm.7874" 3.46" mm 25 mm.9842" 3.46" mm 32 mm " 3.46" All marks indicated by and are trademarks of

42 VI oolholders Page 42 ER11, ER16 & ER20 Collets ER Series collets range from the small ER8 collet to the large ER50 collet. One collet has enough flex to hold a large range of tool shanks, eliminating the need for separate collets for each tool. Both the metric and the inch sizes for all collets are listed. Refer to Brochure 2351 for mounting collets and concentricity specifications. ER-series collets are interchangeable with R- and ESX-type collets. MERIC IN Collet imensions ER A - ia. B - ength Style mm Inch mm Inch " " " " " " " " " " ER11 Collets ER11 Collet Size Range Part Number mm Inch " -.019" " -.039" " -.059" " -.079" " -.098" " -.118" " -.138" " -.157" " -.177" " -.197" " -.217" " -.236" " -.255" Set of S013 Special Accuracy Set Fractional Collet Inch mm " " " " " " " Set of S007 Special Accuracy Set IN MERIC ap Standard Collets ER16 and ER20 Collets ER16 Collet Size Range ER20 Collet Part Number mm Inch Part Number "-.039" "-.079" "-.118" "-.157" "-.197" "-.136" "-.276" "-.315" "-.354" "-.394" "-.433" "-.472" Sets: ER16 (10) ER20 (12) S010 Special Accuracy Sets S012 Fractional Collet Inch mm Fractional Collet " " " " " " " " " " " " " " " Sets: ER16 (12) ER20 (15) S012 Special Accuracy Sets S015 All marks indicated by and are trademarks of

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

Static and Driven Tools LB and LT Series

Static and Driven Tools LB and LT Series Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide

More information

Product Guide SaraDrill

Product Guide SaraDrill Product Guide SaraDrill SARADRILL / A QUICK GUIDE Drilling from solid - a proven technology to drill large diameter holes on low horse power machines. Drilling from 49mm to 270mm diameter holes from solid

More information

Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö

Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors

More information

Driven Toolholders for SAUTER Turrets

Driven Toolholders for SAUTER Turrets Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets

More information

L I V E T O O L F O R O K U M A

L I V E T O O L F O R O K U M A L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,

More information

Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö

Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due

More information

PRECI-FLEX The Flexible Tool System

PRECI-FLEX The Flexible Tool System The Flexible Tool System EXSYS Tool, Inc. T:800.397.9748 F:800.397.9739 P:352.8.4345 www.doosantooling.com CONTACT INFORMATION Main Distribution Repair and Maintenance Service Preventative Maintenance

More information

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013 STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME

More information

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. 1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

FlexC Collet Systems for CNC Lathes

FlexC Collet Systems for CNC Lathes WORKHOLDING FlexC Collet Systems for CNC Lathes Turning Milling Grinding Workholding ROTARY www.hardinge.com FlexC Collet Systems for CNC Lathes Flexibility without Compromise Hardinge welcomes the FlexC

More information

Tooling, Attachments and Accessories

Tooling, Attachments and Accessories Tooling, ttachments and ccessories for Hardinge HN athes HN III and HN IIISP SUPER-PREISION N athes In US, call: 800-843-8801 In anada, call: 800-468-5946 Elsewhere, call: 607-734-2281 ax: 607-734-8819

More information

WORKHOLDING. Toolholder Collets, Bushings and Tool Holders TURNING MILLING GRINDING WORKHOLDING ROTARY.

WORKHOLDING. Toolholder Collets, Bushings and Tool Holders TURNING MILLING GRINDING WORKHOLDING ROTARY. WORKHOLDING Toolholder Collets, Bushings and Tool Holders TURNING MILLING GRINDING WORKHOLDING ROTARY www.hardinge.com Hardinge. Solid Since 80. When it comes to tool holding, value is all about precision

More information

TL-Series Sub-Spindle Operator s Addendum

TL-Series Sub-Spindle Operator s Addendum 3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are

More information

indexable Center Drill

indexable Center Drill Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining

More information

Contents. VDI system. BMT system. 1. Driven Coupling Type DIN 1809 DIN 5480 DIN 5482 HAAS SPUR MT TOEM (BARUFFALDI) 1809 5480 MORI SEIKI

Contents. VDI system. BMT system. 1. Driven Coupling Type DIN 1809 DIN 5480 DIN 5482 HAAS SPUR MT TOEM (BARUFFALDI) 1809 5480 MORI SEIKI ISO 9001:2008 Contents 1. Driven Coupling Type VDI system DIN 1809 DIN 5480 DIN 5482 SPUR MT TOEM (BARUFFALDI) HAAS BMT system 1809 5480 MORI SEIKI 2. Turret Type Radial Turret Axial Turret 3. Driven Tool

More information

HOBBING MACHINE TYPE ZFWZ 8000x40

HOBBING MACHINE TYPE ZFWZ 8000x40 Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth

More information

Machine Tool Facilities

Machine Tool Facilities TECHNOLOGY 1721 LARKIN-WILLIAMS ROAD FENTON, MO 63026 IN C. 636/349-7680 FAX: 636/349-6608 Machine Tool Facilities CNC SWISS MACHINES (1) Citizen C-16 Contouring, Threading, Milling, Slotting, Cross Work

More information

Heavy Duty & Industrial Air Tools

Heavy Duty & Industrial Air Tools Heavy Duty & Industrial Air Tools Heavy-Duty Impacts with Magnesium Housing Tool Part Number 0 607 450 614 0 607 450 615 0 607 450 618 0 607 450 616 0 607 450 619 Drive end 3/8 square 1/2 square 1/2 extended

More information

KOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement.

KOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement. KOMET Adaptors Perfecting the Connection With our comprehension programme of tool s we have the right answer for every requirement. Adaptors with connections specified by manufacturers available on request.

More information

2. DRILLING MACHINE. 2.1 Introduction. 2.2 Construction of a drilling machine. 2.3 Types of drilling machines Portable drilling machine

2. DRILLING MACHINE. 2.1 Introduction. 2.2 Construction of a drilling machine. 2.3 Types of drilling machines Portable drilling machine 2.1 Introduction 2. DRILLING MACHINE Drilling machine is one of the most important machine tools in a workshop. It was designed to produce a cylindrical hole of required diameter and depth on metal workpieces.

More information

] means: More space, more options, more design. emcoturn e45. CNC turning center for bar stock work of up to Ø 45 (51) mm and chucking work

] means: More space, more options, more design. emcoturn e45. CNC turning center for bar stock work of up to Ø 45 (51) mm and chucking work [ E[M]CONOMy ] means: NEW More space, more options, more design. emcoturn e45 CNC turning center for bar stock work of up to Ø 45 (51) mm and chucking work EMCOTURN E45 [Tool turret] - 12 stations VDI

More information

OFFICE LATHE OPERATOR S ADDENDUM

OFFICE LATHE OPERATOR S ADDENDUM OFFICE LATHE OPERATOR S ADDENDUM OL 1 96-0199 Rev. N 2010 Haas Automation, Inc. Installation Move the Office Lathe Warning The Office Lathe has a high center of gravity. Move the machine slowly and carefully

More information

MACHINING OPERATIONS AND MACHINE TOOLS

MACHINING OPERATIONS AND MACHINE TOOLS MACHINING OPERATIONS AND MACHINE TOOLS 1. Turning and Related Operations 2. Drilling and Related Operations 3. Milling 4. Machining & Turning Centers 5. Other Machining Operations 6. Shape, Tolerance and

More information

That s E[M]CONOMY: Design to Cost. EMCOTURN E45. CNC turning center for bar stock work of up to Ø 45 (51) mm and chucking work

That s E[M]CONOMY: Design to Cost. EMCOTURN E45. CNC turning center for bar stock work of up to Ø 45 (51) mm and chucking work [ That s ] E[M]CONOMY: Design to Cost. EMCOTURN E45 CNC turning center for bar stock work of up to Ø 45 (5) mm and chucking work EMCOTURN E45 [Control unit] - Cutting-edge digital control technology -

More information

STANDARD TAPERS 906 STANDARD TAPERS

STANDARD TAPERS 906 STANDARD TAPERS 906 STNDRD TPERS STNDRD TPERS Standard s Certain types small tools and machine parts, such as twist drills, end mills, arbors, lathe centers, etc., are provided with taper shanks which fit into spindles

More information

2, mountable digital vernier calipers X-, Y- and Z-axis 5, ,899.00

2, mountable digital vernier calipers X-, Y- and Z-axis 5, ,899.00 No. 11906V Tool holder MT2 main drive motor 14kW 1.4 3,309.39 140-3000 r.p.m. work table 450 x 180 mm 2,349.00 longitudinal X-axis 260 mm transverse Y-axis 150 mm vertical Z-axis 280 mm Milling machine

More information

MODULAR ANGLE HEAD CATALOG

MODULAR ANGLE HEAD CATALOG ANGLE HEAD CATALOG FLEXIBILITY & PERFORMANCE CAT2014-MRAM NOV. 2014 TABLE OF CONTENTS FLEXIBILITY & PERFORMANCE ANGLE HEAD SYSTEM PAGE 3 ORDERING EXAMPLE PAGE 4 COOLANT CONFIGURATIONS PAGE 5 ANGLE HEAD

More information

Driven & Static CONTENT. Overview... Mazak Tooling... Mori Seiki Tooling... Nakamura Tooling... Driven & Static. Tooling Rebuild service...

Driven & Static CONTENT. Overview... Mazak Tooling... Mori Seiki Tooling... Nakamura Tooling... Driven & Static. Tooling Rebuild service... 205 CONTENT 207 Citizen Tooling.............. 209 Daewoo Tooling............. 217 Haas Tooling................ 221 Mazak Tooling............... 223 Mori Seiki Tooling.......... 249 Nakamura Tooling..........

More information

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle DUGARD Machine Tools Since 1939 CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle www.dugard.com Structure Design Assures Outstanding Stability

More information

GEAR CUTTING MACHINES

GEAR CUTTING MACHINES OFA, OHA ČELÁKOVICE GEAR CUTTING MACHINES SLOVÁCKÉ STROJÍRNY, a.s. G E A R C U T T I N G M A C H I N E S T O S F O R Y O U R P R O F I T GEAR HOBBING MACHINES OFA 32 CNC6, OFA 75 CNC6, OFA 100 CNC6 GEAR

More information

Machine Tool Practices, 8th Edition 2006 Correlated to: South Carolina Manufacturing Course Standards for Machine Technology 1, 2, 3, 4

Machine Tool Practices, 8th Edition 2006 Correlated to: South Carolina Manufacturing Course Standards for Machine Technology 1, 2, 3, 4 62300100 A. PERFORMING WORK SAFETY PRACTICES 62300101 Demonstrate the ability to work safely. SE: p.6-13, 208-210, 233-235 TE: Manual p.11-12, 51-52, 55-58 TECH: CD Shop Safety: PowerPoint Slides 1-8 62300102

More information

INTEGRATED TURN-MILL OPERATIONS SMART TURN

INTEGRATED TURN-MILL OPERATIONS SMART TURN INTEGRATED TURN-MILL OPERATIONS SMART TURN Integrated turn-mill technology. SMART TURN 2-3 Multipurpose innovating technology. The new family of multipurpose turn-mill centres SMART TURN with automatic

More information

Providing Answers For All Your Machine Tool Needs

Providing Answers For All Your Machine Tool Needs Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION

More information

Driven & Static Tooling HAAS

Driven & Static Tooling HAAS Driven & Static Tooling HAAS Haas Driven & Static Haas Tools 3 Table of Contents Haas Tooling SL20, SL30 Standard VDI Turret Driven Tools SL20, SL30 Haas Turret Driven Tools SL20, SL30, TL15, TL25 Hyrbid

More information

Rotary Parts Accumulator

Rotary Parts Accumulator The Perfect Bar Feed Companion Rotary Parts Accumulator Patent Pending - Eliminate Part Damage - Run Your CNC Lathes Completely Unattended for Hours at a Time - Keep Parts in Order for QC Purposes - Pays

More information

Tool Holder for CNC Lathes ISO 9001:2008 ID 9105040234

Tool Holder for CNC Lathes ISO 9001:2008 ID 9105040234 SO 9001:2008 9105040234 Tool older for CNC Lathes 1. pplication Radial Turret xial Turret 2. riven Tool older is produced in accordance with N69880 N69880 1 h6 2 3 1 max 2 0.05 3 min R 0.02 L1 max L2 0.05

More information

3-Component Measuring System

3-Component Measuring System Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters

More information

Definitions and introductions: Terminology: DRILLING MACHINES

Definitions and introductions: Terminology: DRILLING MACHINES DRILLING MACHINES Definitions and introductions: 1. Drilling: It is an operation-producing hole in solid materials using drill- a rotating cutting tool. 2. Drills: these are the ends cutting tools designed

More information

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing

More information

This is a picture of both the 3/8 inch and ¼ inch broaches, the long thin sleeve is the sleeve I made from drill rod for the C type broaches to cut

This is a picture of both the 3/8 inch and ¼ inch broaches, the long thin sleeve is the sleeve I made from drill rod for the C type broaches to cut This is a picture of both the 3/8 inch and ¼ inch broaches, the long thin sleeve is the sleeve I made from drill rod for the C type broaches to cut the bolt guide slot (1/4 inch broach) and start the raceways.

More information

RENISHAW measuring OMP 40 system EN3M0-0 Edgecam Advanced Milling ENS-M0-G EdgeCam Solid Machinist for Granite

RENISHAW measuring OMP 40 system EN3M0-0 Edgecam Advanced Milling ENS-M0-G EdgeCam Solid Machinist for Granite 1 Horizontal Machining Center MATSUURA Model: H-Plus 300 PC 5 Year: 2008 Control: Matsuura G-Tech 30i No. of pallets: 5 Size (each) 300 x 300 mm. Table indexation: 1 Index speed: 1,5 sek./90 Index speed:

More information

Specifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed)

Specifications for a Precision CNC Vertical Machining Center. Section I. Mechanical Performance Specifications (must meet or exceed) Specifications for a Precision CNC Vertical Machining Center Introduction The Naval Research Laboratory Vacuum Electronics Branch requires a high precision computer numerically controlled (CNC) vertical

More information

Cylindrical ER & Floating Holders

Cylindrical ER & Floating Holders Cylindrical & Floating Holders 1 Cylindrical Holders - Features Benefits 2 Information 3 CYL 4 CYL M (Mini Nut) 5 CYL MF (Mini Nut w/flat) 6 CYD MF (Double Sided Mini Nut w/flat) 7 CYL NC (Lathe Standard

More information

Tubular connection elements

Tubular connection elements KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular

More information

Setting up the DeskCNC controller.

Setting up the DeskCNC controller. 1) Determine the steps to linear motion ratios for each axis. 2 2) Determine Maximum velocity (speed). 3 3) Setting up the software Machine Tab 4 4) Setting up the software DeskCNC Setup Tab 5 5) Setting

More information

Lathe Series Training Manual. Live Tool for Haas Lathe (including DS)

Lathe Series Training Manual. Live Tool for Haas Lathe (including DS) Haas Factory Outlet A Division of Productivity Inc Lathe Series Training Manual Live Tool for Haas Lathe (including DS) Created 020112-Rev 121012, Rev2-091014 This Manual is the Property of Productivity

More information

UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS

UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars

More information

That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance

That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance [ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable

More information

DRIVEN and STATIC TOOLING For OKUMA VDI30 (LB200-LT200-GENOS L200M-LT10M)

DRIVEN and STATIC TOOLING For OKUMA VDI30 (LB200-LT200-GENOS L200M-LT10M) DRIVEN and STATIC TOOLING For OKUMA VDI30 (LB200-LT200-GENOS L200M-LT0M) 039 BERGIN RD. HOWELL, MI 48843 PHONE : 877-9-TOOLS ( 80-632-4446 ) FAX: 877-92-TOOLS ( 80-632-4467 ) EMAIL: info@mdtooling.com

More information

TOS Čelákovice Slovácké strojírny, a.s. Stankovského Čelákovice CZECH REPUBLIC

TOS Čelákovice Slovácké strojírny, a.s. Stankovského Čelákovice CZECH REPUBLIC ČELÁKOVICE GPS: 50 9'49.66"N; 14 44'29.05"E TOS Čelákovice Slovácké strojírny, a.s. Stankovského 1892 250 88 Čelákovice CZECH REPUBLIC Tel.: +420 283 006 227, 213 Tel.: +420 283 006 217 Fax: +420 283 006

More information

How to select toolholding

How to select toolholding ow to select tool holding ow to select toolholding eneral Turning ow to select toolholding 1 Select a coupling size - Turn to the ordering page and select the right coupling size. CParting and rooving

More information

MAXICUT FLEX WING MOWERS

MAXICUT FLEX WING MOWERS MAXICUT 600 FLEX WING MOWERS PARTS MANUAL 5301-04 - 12 Twose of Tiverton Limited 6 Chinon Court, Lower Moor Way, Tiverton Business Park, Tiverton, Devon. EX16 6SS. Telephone: (01884) 253691 Fax: (01884)

More information

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400

More information

Quick Reference Catalog

Quick Reference Catalog Gearboxes Turrets Y-Axis Rotary Tools Tool Discs B-Axis Quick Reference Catalog WWW.BARUFFALDI.IT TB Servo Turret SERVO MOTOR TURRETS TB-type turrets rotate thanks to a BRUSHLESS SERVO MOTOR controlled

More information

ELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply

ELLIOTT COLLET STYLE Baffle Expander With Hydraulic Power Supply TM-37 07-29-04 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque

More information

Safety and Operation Instructions RCT50

Safety and Operation Instructions RCT50 Safety and Operation Instructions RCT50 Safety Precautions and Instructions To avoid serious injury and ensure best results for your application, please read carefully all operation and safety instructions

More information

PVM Piston Pumps Service Manual

PVM Piston Pumps Service Manual PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...

More information

HARDINGE Sure-Grip Expanding Collet Systems

HARDINGE Sure-Grip Expanding Collet Systems WORKHOLDING HARDINGE Sure-Grip Expanding Collet Systems www.hardinge.com The Hardinge ID Gripping Advantage Hardinge Sure-Grip Expanding Collet Systems offer solutions to difficult machining problems for

More information

TRIMMING UNIT/DIAMOND MACHINE TST.13

TRIMMING UNIT/DIAMOND MACHINE TST.13 TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.

More information

Milling Chuck Features

Milling Chuck Features Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings

More information

Description. Dimensions. Features. www.pwb-encoders.com. precision works better

Description. Dimensions. Features. www.pwb-encoders.com. precision works better Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature

More information

4 IN 1 COUNTER BORE. 4 main functions. Bolt counter bore 140 spot drill Standard punch 1 Shank for different types of inserts * Patent Pending

4 IN 1 COUNTER BORE. 4 main functions. Bolt counter bore 140 spot drill Standard punch 1 Shank for different types of inserts * Patent Pending 4 IN 1 COUNTER BORE 4 main functions Bolt counter bore 140 spot drill Standard punch 1 Shank for different types of inserts * Patent Pending 45 Bolt counter bore MM large Bolt counter bore MM small Bolt

More information

4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580

4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580 PRECISION LIVE TOOLING & MACHINE TOOL ACCESSORIES MADE IN THE USA 4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580 Patent Pending Live Tooling Planet Products Corporation

More information

CAD 302.02.10.1 SK 30 1 10 (ER 16) 100 32 302.02.16.1 SK 30 2 16 (ER 25) 100 42 302.02.20.1 SK 30 2 20 (ER 32) 100 50

CAD 302.02.10.1 SK 30 1 10 (ER 16) 100 32 302.02.16.1 SK 30 2 16 (ER 25) 100 42 302.02.20.1 SK 30 2 20 (ER 32) 100 50 Spannfutter für Spannzangen DIN 6499 (ISO 15488) System ER Collet chucks for collets DIN 6499 (ISO 15488) ER-system Mandrins à pinces pour pinces DIN 6499 (ISO 15488) système ER Verwendung: Zur Aufnahme

More information

The Boxford range of 3-axis CNC Machining Centres are

The Boxford range of 3-axis CNC Machining Centres are The Boxford range of 3-axis CNC Machining Centres are requirements. Featuring a high-end machine controller, utilising the latest motion control technology, they can satisfy all your 2½ and 3D milling

More information

Technical Information

Technical Information tapping Technical Information Troubleshooting Guide 115 TAP DOES NOT START Program depth: Tap drill size: Tap sharpness: Compression stroke may use up the entire program depth. Check for tap drill size.

More information

CNC Turning Center. L280 Series

CNC Turning Center. L280 Series CNC Turning Center L280 Series The Splendid Double Speed Lathe in The Next Generation CNC Turning Center Basic Structure Bed & Guide Way Spindle Tail Stock Turret VDI Turret Mill Tool Holders Machining

More information

COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES

COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,

More information

INTEGRATED TURN-MILL OPERATIONS SMART TURN

INTEGRATED TURN-MILL OPERATIONS SMART TURN INTEGRATED TURN-MILL OPERATIONS SMART TURN Integrated turn-mill technology. SMART TURN 2-3 Multipurpose innovating technology. The new family of multipurpose turn-mill centres SMART TURN with automatic

More information

Oscillating Steam Engine Building Tips

Oscillating Steam Engine Building Tips The premier source of tooling, parts, and accessories for bench top machinists. Oscillating Steam Engine Building Tips While we can t provide a complete course on machining, this document provides some

More information

CNC - Lathe. in very maintained condition

CNC - Lathe. in very maintained condition CNC Lathe in very maintained condition Manufacture DOOSAN Type PUMA 2600 B Year of manufacture 2012 Control CNC FANUC 0iTD with Manual Guide i Machinenumber ML0200024 operating hours ca. 3.000 Spindle

More information

Chapter 42 Thread and Gear Manufacturing THREAD MANUFACTURING SCREW THREAD STANDARDS 10/16/2014. MET Manufacturing Processes.

Chapter 42 Thread and Gear Manufacturing THREAD MANUFACTURING SCREW THREAD STANDARDS 10/16/2014. MET Manufacturing Processes. MET 33800 Manufacturing Processes Chapter 42 Thread and Gear Manufacturing Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. THREAD MANUFACTURING Screw

More information

LABORATORY MANUAL ADVANCED CAD/CAM LAB ME 413 F

LABORATORY MANUAL ADVANCED CAD/CAM LAB ME 413 F LABORATORY MANUAL ADVANCED CAD/CAM LAB ME 413 F INDEX S.No. Title Page No. 1. Setting up of drawing environment by setting drawing limits, drawing units, naming the drawing, naming layers, setting line

More information

Pos-Z-Cam. Milfact: Milfact: FEATURES: Make long-term die reliability a reality!

Pos-Z-Cam. Milfact: Milfact: FEATURES: Make long-term die reliability a reality! 2PIERCE POSITIVE RETURN CAM Pos-Z-Cam Make long-term die reliability a reality! The Milfab Pos-Z-Cam is a powerful compact positive return cam designed to maximize die runtime. PUNCH BODY GREASE FITTING

More information

Weeke CNC Machining Center, Model BHC 550 NB

Weeke CNC Machining Center, Model BHC 550 NB Weeke CNC Machining Center, Model BHC 550 NB Weeke's BHC-550 NB is a truly industrial machine designed primarily for boring and routing of flat components that have been nested into full sheets of material.

More information

Weeke CNC Machining Center, Model BP-150 Optimat

Weeke CNC Machining Center, Model BP-150 Optimat Weeke CNC Machining Center, Model BP-150 Optimat Weeke's BP-150 is a truly industrial machine designed primarily for point-topoint boring and machining of flat components without special workpiece fixtures.

More information

Because of the many types of drilling tools and methods, the tool choice is determined by a number of factors, including:

Because of the many types of drilling tools and methods, the tool choice is determined by a number of factors, including: Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of the basics of the drills and machines used in a variety of holemaking

More information

The Speed of Live and the Accuracy of Fixed

The Speed of Live and the Accuracy of Fixed The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.

More information

Manufacturing Technician Training

Manufacturing Technician Training Mike McKinney / Jefferson College I. Objective: Developed to meet the industry demands and provide an six-week certification program to fast track individuals to secure a position in the manufacturing

More information

TOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...

TOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers... TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49

More information

ARTI Bileme GRINDING & WELDING MACHINERY

ARTI Bileme GRINDING & WELDING MACHINERY UNIVERSAL TOOL GRINDER (Hydraulic Complete with PowerLock Unit) ARTI Bileme Universal Tool Grinding machine is designed specially to grind the tools used in window-door production and other types of cutter

More information

Air Motors. The The Ultimate Power Tools

Air Motors. The The Ultimate Power Tools ir Motors Tools ir Motors The The Ultimate Power Tools Introduction ir motors are versatile power sources which can be used to power many kinds of operations requiring a rotational drive. They have many

More information

Machinist s Guide to Toolholder Maintenance

Machinist s Guide to Toolholder Maintenance Machinist s Guide to Toolholder Maintenance For Collet & Nut Style Toolholders General Overview Modern CNC machines feature high-capacity tool changers that automatically swap toolholders in and out of

More information

IN-LINE OPPOSED TWIN SPINDLE CNC TURNING MACHINE

IN-LINE OPPOSED TWIN SPINDLE CNC TURNING MACHINE IN-LINE OPPOSED TWIN SPINDLE CNC TURNING MACHINE Chip conveyor discharge height : 1200 Chip conveyor discharge height : 1000 Hydraulic unit (L) Hydraulic unit (R) Operation panel Standard : Light Gray

More information

MURATA MACHINERY EUROPE GmbH Hanns-Martin-Schleyer-Straße 3, D-47877, Willich, GERMANY TEL : +49-(0) FAX : +49-(0)

MURATA MACHINERY EUROPE GmbH Hanns-Martin-Schleyer-Straße 3, D-47877, Willich, GERMANY TEL : +49-(0) FAX : +49-(0) Chip conveyor discharge height : 1200 Chip conveyor discharge height : 1000 Hydraulic unit (L) Control Box Hydraulic unit (R) C/L Operation panel Operation panel MT25 MT25 Standard : Ivory / Light green

More information

Table of contents. Exploded view. Plug/O-ring. Screw, 12pt 17. Shuttle/relief valve Parts shown Enlarged below. Spring. 10 Shims 9

Table of contents. Exploded view. Plug/O-ring. Screw, 12pt 17. Shuttle/relief valve Parts shown Enlarged below. Spring. 10 Shims 9 Table of contents Contents Exploded view 2 Parts list for standard and wheel motor 3 Disassembly, standard and wheel motor 5 Reassembly, standard and wheel motor 7 Disassembly, bearing pack 9 Reassembly,

More information

Mandrel system MIS. www.microcentric.de

Mandrel system MIS. www.microcentric.de Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:

More information

Chapter 6 Machining Center Carbide Insert Fundamentals

Chapter 6 Machining Center Carbide Insert Fundamentals This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5

More information

TECHNICAL INFORMATION Models No. Description

TECHNICAL INFORMATION Models No. Description TECHNICAL INFORMATION Models No. Description HP2070, HP2070F, HP2071, HP2071F 20mm (3/4") 2-Speed Hammer Drill CONCEPT AND MAIN APPLICATIONS L W NEW TOOL P 1 /13 W L These hammer drills have been developed

More information

ACCESSORIES FOR TURNING

ACCESSORIES FOR TURNING ACCESSORIES FOR TURNING Accessories for turning D140 D180 D210 D240 D250 D280 D320 D330 D360 D420 D460 D560 Plane clamping disk Ø 170 mm 344 0295 Plane clamping disk Ø 200 mm 344 0352 Plane clamping disk

More information

INSTRUCTION S G-Comp Front Suspension: Chevy Nova Speedway Motors, Inc. 2015

INSTRUCTION S G-Comp Front Suspension: Chevy Nova Speedway Motors, Inc. 2015 INSTRUCTION S 350-100 G-Comp Front Suspension: 62-67 Chevy Nova Speedway Motors, Inc. 2015 Kit Contents: 91035700 G-Comp Bare Subframe 350101 G-Comp Support Tubes 91035702 G-Comp Front Subframe Hardware

More information

Use a spring loaded spindle adaptor is highly recommended on all multiple spindle and automatic machines.

Use a spring loaded spindle adaptor is highly recommended on all multiple spindle and automatic machines. 100 Series automatic Stud Driver TITAN 100 Series automatic stud drivers are designed for the fast and accurate driving of large studs (M10 M30) to a predetermined projection height. Their time proven

More information

Introduction. Drilling operation.

Introduction. Drilling operation. 112 Drilling and Reaming Valery Marino, Manufacturing Technology 6.3 DRILLING AND REAMING Introduction Drilling is a process of producing round holes in a solid material or enlarging existing holes with

More information

Tork-Lok Arbors and Collets

Tork-Lok Arbors and Collets Tork-Lok Arbors and Collets TORK-LOK ARBORS AND COLLETS The Tork-Lok arbor design answers the need for a completely versatile workholding device. Precision ground flats on collets and arbors improve long-term

More information

Module 4 General Purpose Machine Tools. Version 2 ME, IIT Kharagpur

Module 4 General Purpose Machine Tools. Version 2 ME, IIT Kharagpur Module 4 General Purpose Machine Tools Lesson 18 Kinematic system and operations of drilling machines Instructional Objectives At the end of this lesson, the students will be able to : (i) State the basic

More information

QUICK-CHANGE tool system for multi-tasking and turning lathes

QUICK-CHANGE tool system for multi-tasking and turning lathes System solution from SISSTOOLS Tool system for upper turning-/milling spindles System solution from SISSTOOLS Increase productivity by reducing nonproductive time Very quick tool changing time SISS TOOLS

More information

Standard Scales SERIES 182 Made of Low Expansion Glass. Working Standard Scales SERIES 182 E-32 FEATURES DIMENSIONS SPECIFICATIONS FEATURES DIMENSIONS

Standard Scales SERIES 182 Made of Low Expansion Glass. Working Standard Scales SERIES 182 E-32 FEATURES DIMENSIONS SPECIFICATIONS FEATURES DIMENSIONS Standard Scales SERIES 182 Made of Low Expansion Glass under Mitutoyo s leading-edge Linear Scale production technology. a standard for calibrating graduated scales. 182-502-50 182-501-50 Accuracy (at

More information