High Pressure Equipment High Pressure Valves, Fittings and Tubing
|
|
- Georgiana Carpenter
- 7 years ago
- Views:
Transcription
1 igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle valves, fittings, line filters, check valves, safety heads, rupture discs, anti-vibration gland assemblies, tubing and nipples are engineered to the highest standards of repeatable quality. The reliable performance of these products has made ip one of the world s leading suppliers of elevated pressure components. igh components use a coned-and-threaded connection which accommodates the high temperatures and pressures common in these applications. igh valves are available in various tubing sizes and with body designs to satisfy widely varied requirements. line of fittings is available to facilitate adapting to Taper Seal, Medium, or other igh threaded pipe systems. Index Page 0,000 psi Valves ,000 psi Valves psi Valves ittings Unions, Bulkheads & Caps ine ilters & Check Valves Rupture iscs Safety eads nti-vibration land ssemblies..4. Tubing Coned & Threaded Nipples Connection etails ppendix R2 2/ 4.
2 igh quipment 2 ( ) 0,000 psi igh Valves igh (coned & threaded) type connections for,,, /6" and " O.. tubing. Non-rotating tip stems are standard for on-off service and ensure long life on valve seats. Regulating tip stems are available for all valves at no additional cost, add - R to part number. lands and collars for tubing are supplied with each valve unless otherwise requested (glands and collars shown on pages 4.6 and 4.). Materials include high tensile type 6 stainless steel bodies and hardened -4P stainless steel lower section stems. Packing is Teflon (40 ) standard with optional Viton (0 ), BUN-N (200 ) and rafoil (800 ) available at no additional cost. ir operators for remote control operation are available for all valves. (Refer to ir Operator section of catalog for additional data). xtreme temperatures can be accommodated using extended stuffing boxes (See Specialty Valve section of catalog). These are available for all sizes except tubing. 4 ( ), 6 ( ) and ( /6") Valve eatures Non-rotating stem tips Packing below stem threads Type 6 ss high tensile bodies Positive gland lock device No stem adjustment needed Black T-handles or choice of 4 colors Tube sizes through " 6 (") 4.2 R 2/6
3 0,000 psi igh Valves Two Way Straight Valves Tubing Catalog No. psi Connection Orifice Thickness O.. O.. O.. /6" O , ,000 4 " O ,000 6 /6" 0-6 0,000 6 /6" /6" 0-0,000 2 " /6" 8 2 /64" 4 /6" /6" /6" /6" " " /6" 2 /6" 2 /6" 2 /6" /6" 4 /6" 2 /64" /6" " " Two Way ngle Valves Tubing Catalog No. psi Connection Orifice Thickness O.. O.. O.. /6" O.. " O ,000 0,000 0,000 0,000 0, /6" /6" /6" /6" 2 4 /6" " /6" 2 /6" 2 /6" 2 /6" 2 /6" 2 /64" /6" " " Three Way Valves / Two Connections Tubing Catalog No. psi Connection Orifice Thickness O ,000 O ,000 O ,000 /6" O.. 0-0, " O ,000 6 /6" /6" /6" /6" 6 /6" 2 /6" /6" /6" /6" " " 2 /6" /6" 2 /6" 2 /6" /6" /6" 2 /64" /6" " " Three Way Valves / One Connection Tubing Catalog No. psi Connection Orifice Thickness O.. O.. O.. /6" O.. " O ,000 0,000 0,000 0,000 0, /6" /6" /6" /6" /6" /6" " " /6" 2 2 /6" /6" /6" /6" 2 /6" 2 /6" 2 2 /64" /6" " " Three Way / Two Stem Connection Valves Tubing Catalog No. psi Connection Orifice Thickness O ,000 O ,000 O ,000 /6" O.. 0-0, " O ,000 6 /6" 2 " /6" /6" /6" 2 /6" 2 /6" /6" /6" /6" 4" 4 2 " /64" /6" " " Replaceable Seat Valves Tubing Catalog No. psi Connection Orifice Thickness O.. O.. /6" O.. " O R 0-26-R 0-2-R 0-26-R 0,000 0,000 0,000 0, /6" 6" 6 6 /6" " /6" 2 2 /6" 2 /6" 2 2 /6" " " igh quipment Company R4 2/02 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website: 4.
4 igh quipment 40,000 psi igh Valves igh (coned & threaded) type connections for /6" O.. tubing. Non-rotating tip stems are standard for on-off service and ensure long life on valve seats. Regulating tip stems are available for all valves at no additional cost, add - R to part number. lands and collars for tubing are supplied with each valve unless otherwise requested (glands and collars shown on pages 4.6 and 4.). Materials include high tensile type 6 stainless steel bodies and hardened -4P stainless steel lower section stems. Packing set consists of multiple Teflon packing with nylon back up, with optional Viton (0 ), BUN-N (200 ) and rafoil (800 ) available at no additional cost. ir operators for remote control operation are available for all valves. (Refer to ir Operator section of catalog for additional data). xtreme temperatures can be accommodated using extended stuffing boxes (See Specialty Valve section of catalog). Valve eatures Non-rotating stem tips Packing below stem threads Type 6 ss high tensile bodies Positive gland lock device No stem adjustment needed Black T-handles or choice of 4 colors 4.. R 2/6
5 40,000 psi igh Valves Two Way Straight Valves Tubing Catalog No. psi Connection Orifice Thickness /6" O ,000 2 " /6" 2 Two Way ngle Valves Tubing Catalog No. psi Connection Orifice Thickness ,000 2 /6" 2 /6" O.. Three Way Valves / Two Connections Tubing Catalog No. psi Connection Orifice Thickness /6" O ,000 6 /6" 2 /6" /6" Three Way Valves / One Connection Tubing Catalog No. psi Connection Orifice Thickness /6" O ,000 2 /6" /6" 2 Three Way / Two Stem Connection Valves Tubing Catalog No. psi Connection Orifice Thickness /6" O , /6" /6" 4 Replaceable Seat Valves Tubing Catalog No. psi Connection Orifice Thickness /6" O R 40, /6" 2 igh quipment Company R4 2/02 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website:
6 igh quipment psi igh Valves igh (coned & threaded) type connections for,,, /6" and " O.. tubing. Non-rotating tip stems are standard for on-off service and ensure long life on valve seats. Regulating tip stems are available for all valves at no additional cost, add - R to part number. lands and collars for tubing are supplied with each valve unless otherwise requested (glands and collars shown on pages 4.6 and 4.). Materials include high tensile type 6 stainless steel bodies and hardened -4P stainless steel lower section stems. Packing set consists of multiple Teflon packing with nylon back up, with optional Viton (0 ), BUN-N (200 ) and rafoil (800 ) available at no additional cost. ir operators for remote control operation are available for all valves. (Refer to ir Operator section of the catalog for additional data). xtreme temperatures can be accommodated using extended stuffing boxes (See Specialty Valve section of catalog). These are available for all sizes except tubing. Valve eatures Non-rotating stem tips Packing below stem threads Type 6 ss high tensile bodies Positive gland lock device No stem adjustment needed Black T-handles or choice of 4 colors Tube sizes through /6" 4.4 R 2/6
7 psi igh Valves Two Way Straight Valves Tubing Catalog No. psi Connection Orifice Thickness O O O /6" O /6" /6" /6" /6" /6" /6" /6" 2 " /6" 2 /6" " " /6" 2 /6" 2 /6" 2 " " " Two Way ngle Valves Tubing Catalog No. psi Connection Orifice Thickness O.. O.. O.. /6" O /6" /6" /6" /6" /6" /6" /6" 2 " " /6" 2 /6" 2 /6" 2 /6" 2 " " " Three Way Valves / Two Connections Tubing Catalog No. psi Connection Orifice Thickness O /6" /6" " 2 /6" " O /6" /6" " 2 /6" " O.. /6" O /6" /6" /6" 6 /6" " 2 /6" 2 /6" /6" " Three Way Valves / One Connection Tubing Catalog No. psi Connection Orifice Thickness O O /6" /6" /6" /6" " " 2 /6" 2 /6" " " O.. /6" O /6" /6" /6" 2 /6" /6" 2 /6" 2 " Three Way / Two Stem Connection Valves Tubing Catalog No. psi Connection Orifice Thickness O O O /6" O /6" /6" /6" /6" 2 2 /6" /6" /6" /6" /6" 4" " " " " Replaceable Seat Valves Tubing Catalog No. psi Connection Orifice Thickness O.. O R R 4 6 /6" /6" 6" 6 " 2 /6" 2 /6" " " 60-2-R /6" 6 /6" 2 /6" 2 /6" O.. igh quipment Company R 2/02 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website: 4.
8 igh quipment lands/sleeves/plugslbows/tees/crosses complete range of elbows, tees, and crosses is available for all of the tubing connection sizes. Material is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. Connection Components Tube Catalog No. Size land 60-2M2 60-2M4 60-2M6 60-2M /6" 40-2M /6" 0-2M6 " Tube Catalog No. Size Collar /6" 40-2 /6" 0-26 " Tube Catalog No. Size 60-M2 60-M4 60-M6 60-M /6" 40-M /6" 0-M6 " Plug B igh lbows Rating Catalog No. psi Connections -B Thickness O.. TUB O.. TUB 4 " " O.. TUB 6 " " /6" O.. TUB ,000 /6" O.. TUB ,000 " O.. TUB 6 " " 2 /6" 2 /6" C B igh Tees Rating Catalog No. psi Connections -B-C Thickness O..TUB O..TUB 4 " " O..TUB 6 /6" " /6" " 60-2 /6" O..TUB 2 2 /6" ,000 /6" O..TUB 2 2 /6" ,000 " O.. TUB 6 4 " 2 /6" 2 /6" C B igh Crosses Rating Catalog No. psi Connections -B-C- Thickness O.. TUB O.. TUB 4 " " O.. TUB 6 2 /6" " " /6" O.. TUB 2 2 /6" ,000 /6" O.. TUB 2 2 /6" ,000 " O.. TUB /6" 2 /6" 4.6 R 8/04
9 Union Couplings (Slip Type) Union (slip type) couplings are ideal for use in confined space installations. This design allows the entire coupling to be disconnected and slipped back over the tubing to facilitate assembly and disassembly. In installations where tubing is easily assembled, it is preferable (and less expensive) to use standard straight couplings (see accessories section). Standard material is high tensile 6 stainless steel. Standard tubing collars and glands are provided unless otherwise specified. Bulkhead Couplings Bulkhead couplings are designed specifically for passing a tubing connection through a panel or steel barricade. These couplings include a locknut as shown. Material is high tensile 6 stainless steel. Standard tubing collars and glands are included unless otherwise specified. Rating ex Catalog No. psi Connections B ength Size U O.. TUBIN U O.. TUBIN 4 4 " U O.. TUBIN 6 6 " 60-2-U /6" O.. TUBIN U 40,000 /6" O.. TUBIN U 0,000 " O.. TUBIN 6 6 B ocknut Rating Panel ex Outside Catalog No. psi Connections ole B ength Size Thread B O.. TUBIN /6" 2 2 " B O.. TUBIN /6" 4 4 " B O.. TUBIN /6" B /6" O.. TUBIN /6" B 40,000 /6" O.. TUBIN /6" B 0,000 " O.. TUBIN /6" B Caps Tubing end caps are offered for use in sealing off tubing ends either for temporary use or permanent use such as on small volume reservoirs. Standard material is high tensile 6 stainless steel. Standard tubing collars and glands are provided unless otherwise specified. Rating ex Catalog No. psi Connections ength Size C O.. TUBIN C O.. TUBIN C O.. TUBIN 6 " 60-2-C /6" O.. TUBIN 40-2-C 40,000 /6" O.. TUBIN 0-26-C 0,000 " O.. TUBIN 6 " igh quipment Company R / 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website: 4.
10 ine ilters The line filters as shown utilize sintered stainless steel filter discs pc./set. Porosities are available as per the chart to the right. If not otherwise specified, 00 micron filter discsare supplied. (One micron = 0.00 millimeters). Material of bodies and end covers is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. Ball Check Valves Ball type check valves insure flow in one direction only. Material for bodies and covers is 6 stainless steel (0-46 body and cover are -4P). Standard tubing glands and collars are provided unless otherwise specified. Soft Seat Check Valves Soft seat check valves insure flow in one direction only and can be mounted in any position. These are highly reliable for both gas and liquid service. Standard O-ring (soft seat) material for the sealing surface is Buna-N (nitrile) with other materials including Teflon and Viton available on request. Temperature is limited by the choice of O-ring material. Material of all other parts is high tensile 6 stainless steel. (0-46-T body and cover are -4P). Standard glands and collars are provided unless otherwise specified. igh quipment Catalog No. psi Connections ength ex ,000 /6" I PRSSUR I PRSSUR 4 /6" I PRSSUR I PRSSUR /6" I PRSSUR ,000 " I PRSSUR 6 2 R with flats OW Micron Size ilter Rating ex vailable Catalog No. psi Connections ength Size ,000 /6" I PRSSUR 60-2 I PRSSUR 4 /6" 60-4 I PRSSUR I PRSSUR 60- /6" I PRSSUR OW OW Catalog No. psi Connections ength ex 0-42-T 0,000 I PRSSUR " 0-44-T 0,000 I PRSSUR " 0-46-T 0,000 I PRSSUR " 0-4-T 0,000 /6" I PRSSUR T 40,000 /6" I PRSSUR /6" T I PRSSUR 4 /6" T I PRSSUR 4 /6" 60-4-T /6" I PRSSUR /6" 0-46-T 0,000 " I PRSSUR 6 2 R with flats 4.8 R2 2/
11 xcess Surge Check Valves xcess surge check valves are used to eliminate loss of pressure due to a sudden surge or opening of a pressure component in a pressurized system (such as a breakage of a gauge or test component). These check valves should be mounted in the vertical position. Only one basic size is available (60-4-) with adapters readily available to convert to other size connections. Standard tubing glands and collars are provided unless otherwise specified. OW Catalog No. psi Connections ength ex /6" I PRSSUR Rupture iscs /4 " ngled Seat Standard rupture discs are available from stock in burst pressures as listed in the chart to the right. These discs are 6 stainless steel (except for 000 psi which are inconel) and may be used with any of the safety heads shown. Note that these rupture discs are manufactured with a tolerance of plus 6% and minus % of specified burst pressure. Samples of each batch are then tested and the actual average burst pressure is stamped on the accompanying metal tag. actors influencing rupture disc life include corrosion, metal fatigue, and cyclic effect. Periodic replacement is recommended to prevent premature failure. It is recommended that working pressure does not exceed 0% of burst rating for maximum life cycle of the disc.,000,00 2,000 2,00,000,00 4,000 4,00 /4 " effective area,000,00 6,000 6,00,000,00 8,000 8,00,000,00 0,000 0,00 SPCI ISCS are available on special order for pressure ranges not shown above and in numerous materials and coatings. Consult factory for price and delivery. Standard Burst s (in psi at 2 ),000,00 2,00,000,00 8,000 20,000 22,00 2,000 2,000 0,000,000,00 40,000 4,000 0,000,000 6,000 igh quipment Company R4 2/02 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website: 4.
12 igh quipment Safety eads choice of three safety head designs is available, male inlet, female inlet (straight), and tee type. The male inlet design can be inserted directly into the tubing connections of valves and various fittings such as tees and crosses, or located in pressure vessels. Outlet connections on all sizes are pipe (NPT). This outlet may be connected to a suitable discharge line to vent pressure to a safe location in the event of bursting of the rupture disc. Torque required for sealing rupture discs will range from 40 to 0 foot pounds, depending upon pressure and media being used. Material of bodies and hold down nuts is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. Note: Rupture discs are not included and must be ordered as a separate item. NPT Male Inlet Safety eads Rating Inlet ex Catalog No. psi Connection ength Size 60-6M4 I PRSSUR 60-6M6 I PRSSUR M /6" I PRSSUR M 40,000 /6" I PRSSUR 2 0-6M6 0,000 " I PRSSUR NPT B Tee Type Safety eads Rating Inlet Catalog No. psi Connection B Thickness I PRSSUR " I PRSSUR " I PRSSUR " 60-6 /6" I PRSSUR ,000 /6" I PRSSUR 2 NPT emale Inlet (Straight) Safety eads Rating Inlet ex Catalog No. psi Connection ength Size I PRSSUR I PRSSUR I PRSSUR 60-6 /6" I PRSSUR ,000 /6" I PRSSUR R2 2/
13 nti-vibration land ssemblies Tubing systems that are subject to extreme vibration or shock, such as mobile pressure systems or long tubing runs culminating at a compressor, will benefit from the use of igh quipment Company s nti-vibration land ssemblies. These assemblies utilize the same reliable connection geometries as the standard ip fittings, with the added benefit of essentially unlimited vibrational fatigue life. coned and threaded tube, when subjected to unusual or excessive vibration, may fail prematurely and break at the last thread. The nti- Vibration land ssembly acts to move the fulcrum of vibration away from the threaded portion of the tube and onto the strong, solid wall of the tubing. wedge-like collet firmly holds the assembly in place, virtually eliminating premature tubing failure while reliably maintaining a leak-free connection between the tube and the connection seat. igh nti-vibration land ssemblies Rating Catalog No. psi Connections B 60-M4 I PRSSUR /6" 60-M6 I PRSSUR /6" 60-M /6" I PRSSUR /6" /6" 40-M 40,000 /6" I PRSSUR /6" /6" nti-vibration Components Tubing Slotted Collet Size Collet land Collar /4 " B /8 " /6 " igh quipment Company R /6 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website: 4.
14 igh quipment igh Tubing Tubing is cold drawn, seamless, and is supplied in the hard condition (not annealed). Tensile strength is approximately 40 percent higher than that of annealed tubing. ll tubing is manufactured in strict accordance with igh quipment Company specifications to insure tolerances and bore quality. Tubing is stocked in lengths of 8 to 22 feet but may be ordered in shorter lengths with no additional cutting charge. Note: The O.. tubing sizes may be coiled for shipment. arger sizes must be shipped in straight lengths. /8 " /4 " /8 " /6 " /6 " " Working Type of Catalog Tubing Size psi Connection Used Material Order Number O.. x 0.020" I.. I PRSSUR (2) 6 SS 60-2 O.. x 0.040" I.. 0,000 I PRSSUR (2) 6 SS 0-2 O.. x 0.08" I.. I PRSSUR (4) O.. x I.. I PRSSUR (6) /6" O.. x /6" I.. /6" I PRSSUR () /6" O.. x I.. 40,000 /6" I PRSSUR () 6 SS * SS * SS SS SS SS SS SS " O.. x 0.4" I.. 0,000 " I PRSSUR (6) 6 SS Nipples Nipples as shown below are stocked in Types 04 and 6 Stainless Steel. Nipples in lengths other than those shown are supplied upon request. Nipples are not furnished with collars and glands, unless specified at time of order. Coned and Threaded Nipples ength Tubing Size (O.. x I..) x 0.020" x 0.040" ** x 0.08" x * /6" x * /6" x /6" * " x 0.4" ** psi psi 0,000 psi psi psi 40,000 psi psi 0,000 psi 60-M2-2 0-M M4-2. " 60-M2-0-M2-60-M6-4" 60-M2-4 0-M M-4 60-M-4 6" 60-M2-6 0-M M M M-6 60-M-6 0-M6-6 8" 60-M M M-8 60-M-8 0-M6-8 " 60-M2-0-M2-0" 60-M M M-0 60-M-0 0-M M2-2 0-M M M M-2 60-M-2 0-M6-2 Specify 6 SS or 04 SS when ordering. * lso used for 0,000 psi series. ** 6 SS 4.2 R4 /06
15 igh Connections (Coned and Threaded) 0,000/40,000/ psi service The igh tubing connection is available for,,, /6" and " O.. tubing. The tubing may be prepared with the use of tooling (see tooling section.0) or prepared at the factory to specified lengths. dditionally, standard length coned and threaded tubing nipples are available from stock (see page 4.2). This connection has become an industry standard for use at elevated pressures and temperatures in both liquid and gas applications. It may be disassembled and retightened indefinitely. The threads of the gland are right-hand while the threads of the collar and tubing are left-hand to prevent rotation of the collar during assembly. Materials ll of the components required for make-up of a igh connection (glands, collars and plugs) are produced in Type 6 stainless steel. lands and collars. ll valves and fittings are provided (except nipples) unless otherwise requested. (See chart on the right for size details and catalog numbers). 2 /8 " O.. Tubing /4 " O.. Tubing emale Opening etail land -20 IN. 60 #6 rill.046 0,000 & psi 40,000 psi 0,000 psi /8 " O.. Tubing /6 " O.. Tubing /6 " O.. Tubing " O.. Tubing /6"-8 60 /6" /6" /6" /6" X /6" X /6" /6" X /6" 60 /6" /6" /6" /6" -2 T. 60 -X /6" /6" 2, 4, 6, 60-2M2 60-2M4 60-2M6 60-2M 60-2M 0-2M6 Collar Plug /6" /6" /6" /6" /6" /6" /6"-8-.. "-4-.. Tubing land Collar /6" 2 2 /6" /6" /6" 60-M2 60-M4 60-M6 60-M 40-M 0-M6 6 Tube nd Prep /6" /6" /6"-8-.. /6" /6" /6"-8-.. /6" /6" " Tubing land Collar /6" /6" M2 M4 M6 M M M6 /6" 4. igh quipment Company R 2/4 ppendix 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website:
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationFittings, Tubing & Nipples
Fittings,Tubing & Nipples - Medium Pressure Fittings, Tubing & Nipples Medium Pressure Pressures to 20,000 psi (1379 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples Medium Pressure Pressures to 20,000 psi (1379 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More informationHigh Pressure Equipment Pressure Vessels and Reactors Index
Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples High Pressure Pressures to 150,000 psi (10342 bar) Since 1945 utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering
More informationFittings and Tubing. Low Pressure. Fittings and Tubing - Low Pressure. Low Pressure Fittings and Tubing Features: Pressures to 15,000 psi (1034 bar)
ittings and Tubing - Low Pressure ittings and Tubing Low Pressure Pressures to 15,000 psi (1034 bar) Since 1945 utoclave ngineers has designed and built premium quality valves, fittings and tubing. This
More informationNeedle Valves. Needle Valves - High Pressure. 30SC, 43SC, 30VM, 40VM, 60VM, 100VM & 150V Series. High Pressure. Pressures to 150,000 psi (10342 bar)
Needle Valves High Pressure 30S, 43S, 30V, 40V, 60V, 00V & 50V Series Pressures to 50,000 psi (0342 bar) Since 945, utoclave ngineers has designed and built premium quality valves, fittings and tubing.
More informationFittings, Tubing & Nipples
Fittings, Tubing & Nipples High Pressure Pressures to 150,000 psi (10342 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationIndex 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationIndex 7.1. Page R2 12/99
High Equipment Air Operated s High Equipment Company offers five lines of air operators to accommodate remote operation of pressure valves up to 00,000 psi. Various models of diaphragm and piston operated
More informationFittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
More informationNITROUS TRANSFER PUMP INSTRUCTIONS
NITROUS TRANSFER PUMP INSTRUCTIONS SAFETY TIPS Never directly inhale nitrous oxide. When inhaled in large quantities, nitrous oxide can cause respiratory ailments or in extreme cases, death by suffocation.
More informationThese features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net < 129 >
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationStyle 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More informationTYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
More informationSIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationYour safety and the safety of others are very important.
NATURAL GAS TO PROPANE CONVERSION KIT 090 INSTALLATION INSTRUCTIONS FOR ALTITUDES 0 -,00 FT. ONLY PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements...
More informationKF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
More informationneedle valves Needle Valves Index At a Glance 1
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationAIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
More informationInstallation and Operating Instructions Installation Instructions for SS EPE-316L Series
INSTR3010 0406 Installation and Operating Instructions Installation Instructions for SS EPE-316L Series Congratulations on your purchase of this Aqua-Pure high flow, single housing filtration system. This
More informationFloat and Thermostatic Traps Series H, C and X
Hoffman Specialty Installation & Maintenance Instructions HS-(E) and Thermostatic Traps Series H, C and X Series C & NPT Series C NPT Series X NPT Series C NPT Series H Ratings Maximum Max. Operating NPT
More informationOPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...
OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3
More informationBlock and Bleed Gauge Valves M25 and M251
Product Overview The M25 and M251 are two-valve single outlet gauge valves that combine isolating, calibrating, and venting facilities in a single compact unit. These valves enable gauges, pressure transmitters,
More informationFRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
More informationFITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
More informationCajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
More informationInstallation Instructions 4508 4508S
SYMPHONY Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. Speed Connect
More informationOcean Engineering Technical Data Sheet Stuffing Tubes
Ocean Engineering Technical Data Sheet Stuffing Tubes Stuffing tubes are devices used to allow a wire or cable to pass through a wall or bulkhead and protect components from the outside environment. Many
More informationCheck Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
More informationMACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC
RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side
More informationBUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
More information1998½-2007 Dodge Ram 5.9L Cummins
9 January 2014 1081130-33 Dodge Cummins Low Fuel Pressure Alarm Light Kit (I-00143) 1 1998½-2007 Dodge Ram 5.9L Cummins LOW FUEL PRESSURE ALARM LIGHT - Installation Manual - Part Number Sequence: 1081130
More informationReplacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS
Replacement parts DO NOT SERVICE THE BOILER WITHOUT A WM97+ MAINTENANCE KIT AVAILABLE Failure to adhere to these guidelines can result in severe personal injury, death or substantial property damage. The
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationSubmersion/Insertion Toroidal Sensor
Instruction Sheet PN 51A-228/rev.P December 2010 Model 228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS
More informationSAFETY SAFETY APPAREL 20,000 PSI
SAFETY APPAREL TurtleSkin Water Armor is designed for UHP safety. Protection up to 2800 bar or 40,000 psi One size fits all money-saving design Modular design allows you to buy only what you need Replacement
More informationVogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22
The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed
More informationInstallation Instructions
Installation Instructions S50-310 (Semi-Circular) S50-311 (Circular) Accu-Zone Infrared Control Conversion Kit for Terrazzo & Stainless Steel Classic Washfountains (Non-sectional) Table of Contents Pre-Installation
More informationMFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
More informationLimit Switches/ Receptacle Assembly... For Nuclear Environments
180-302/402 Series Inside ontainment reas TM Limit Switches/ Receptacle ssembly... or Nuclear nvironments eatures: Qualified to I s 344-1975, 323-1974, and 382-1972. Manufactured to a quality assurance
More informationASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net < 129 >
Needle Valves BelGAS Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationTHERMOMETER INSTALLATION, OPERATION AND MAINTENANCE
THERMOMETER INSTALLATION, OPERATION AND MAINTENANCE www.winters.com MANUFACTURER OF INDUSTRIAL INSTRUMENTATION Bi-Metal Thermometers Bi-Metal Thermometers Winters bi-metal thermometers are direct sensing
More informationSelect Radiators Installation Guide
Select Radiators Installation Guide Table of Contents Informational Symbols...3 Before You Begin...4 Select Rough-In... 5 Connection Installation...6 Optional Piping Arrangements...7 Conventional Wall
More informationDESIGN STANDARDS SECTION 23 60 00
PART 1 - GENERAL 1.01 Work included: A. Piping, tubing and fittings. B. Piping specialties. C. Special duty valves. D. Refrigerants. E. Chillers. F. Refrigerant monitors. 1.02 General requirements: A.
More information2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV
More informationInstalling a Probe. Typical Installation
for hazardous locations. Prior to any installation in a Classified Hazardous Location, verify installation methods by the Control Drawing referenced on the product s name tag 2. The Feed Through Assembly
More informationBall Valves (HB Series) Catalog 4121-HB Revised, April 2005
Ball Valves (HB Series) Revised, April 2005 Introduction Parker High Pressure HB4 Series Ball Valves provide reliable shut-off or switching functions. The upper and lower trunnion bearings enhance the
More informationIF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
More informationStainless steel process fittings
Page 1/6 Stainless steel process fittings Installation in pipe systems Installation in tanks and vessels Hygienic version FDA conformity of materials Probe length 120 mm 120 mm Availability of various
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationWatts Pure Water Systems
Watts Pure Water Systems WM-120-PT Installation and Operation Manual Premier Water Systems Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before
More informationFlare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationWD600 STEAM TRAPS. Thermodynamic Steam Trap
WD600 Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company WD600, WD600L Sizes 3/8, 1/2, 3/4, 1 NPT Material Stainless
More information167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
More informationP900 SERIES PORTABLE HYDROSTATIC TESTER
P900 SERIES PORTABLE HYDROSTATIC TESTER MODELMODEL P900-SM ( STANDARD MODEL) SHOWN IN PHOTO coated square tubular frame on wheels for easy transport. PANEL MOUNTED CONTROLS: 4 dial gauges, pump regulator
More information5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationPLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263
More informationUtility Distribution Systems
Utility Distribution Systems 6/2012 A0011037 1 WARRANTY This equipment is warranted to be free from defects in materials and workmanship, under normal use and service, for a period of 12 months from date
More informationTAMPERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
TAMPERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1064 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Check the tamping butt lock screw, it must be tightened
More informationHM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control
HM Series - DBB Single, Double Block & Bleed Valves INDEX / USER RESPONSIBILITY Index Technical Specifications... 3 How To Order / Optional Extras... 5, 9, 12, 14 Hand Valves... 4 Gauge Valves... 6 Model
More informationResidential Plumbing
Residential Plumbing Residential Plumbing At this Construction Zone workstation, you will explore the field of residential plumbing using a hands-on approach. You will learn about common pipe fittings
More informationAPCO SLOW CLOSING AIR/VACUUM VALVES
BULLETIN 1 JULY 01 APCO SLOW CLOSING AIR/VACUUM VALVES Series 1900 APCO Slow Closing Air/Vacuum s Maximum Air Flow Velocity in Good Pipeline Design The Air/Vacuum operates in the normal fashion allowing
More informationMeter Units. Inch and Metric Threads. General. Application. How to Order 35470 R2 09/12
Meter Units Inch and Metric Threads General Meter units are oil proportioning devices for cyclic systems. Each outlet of a lubricating system is controlled by a meter unit. The lubricator in the system
More informationTable of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
More informationProduct Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More informationBOWL ASSEMBLY SELECTION Select impeller in exactly the same manner as for lineshaft type pump. Note comments under WELL SIZE.
SUBMERSIBLE PUMP selection A submersible pump consists of the following basic elements: < Bowl Assembly < Motor < Cable < Drop Pipe < Surface Plate (with)(without) discharge elbow DATA REQUIRED FOR SELECTION
More informationInstallation Manual DIAPHRAGM WELL TANK
Installation Manual DIAPHRAGM WELL TANK Safety Instructions Installation Warranty IN-LINE SERIES: 2-5 & 7 GALLON HORIZONTAL SERIES: 7-14 & 20 GALLON VERTICAL SERIES: 14-20-32-36-52-86-96-119 GALLON KEEP
More informationMorrison Bros. Co. General Product Specifications
Morrison Bros. Co. General Product Specifications Tank Mounted Spillbox The spill containment device is manufactured to contain spills and drips that may occur at the fill point on aboveground storage
More informationThe Silencer. Silencer Outdoor Air Blower, The Name That Says It All. Quality Product. Call 1-800-848-3077 for more information
The Silencer The Silencer is our most popular outdoor-rated air blower for one simple reason. It s quiet! Turn on your Silencer day or night, and you won t disturb the neighbors or ruin your relaxing spa
More informationCopper Meter Resetters
Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710
More informationTrouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
More informationBERMAD Waterworks. Pressure Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features
Pressure Reducing Valve Flow and leakage reduction Cavitation damage protection Throttling noise reduction Burst protection System maintenance savings The Pressure Reducing Valve is a hydraulically operated,
More informationStainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
More informationCommercial / HVAC / Plumbing. Specification Guide. For. Pressure & Temperature Instruments & Related Accessories
Commercial / HVAC / Plumbing Specification Guide For Pressure & Temperature Instruments & Related Accessories Prepared for Consultant, Design & Specification Engineers Gauges Contractor Gauge (PCT, PCT-LF)
More information300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS
Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES
More informationHVAC/R GAS TEST GAUGES SPECIFICATIONS ACCURACY CASE SIZES CASE MATERIAL MOUNTING STYLE HOUSING MATERIAL TUBE & SOCKET MOVEMENT RANGES DIAL STANDARD
HVAC/R GAS TEST GAUGE Hex or Bell Type mounting 5 to00 Psi pressure ranges Steel case and brass internals Use to pressure test all new gas installations for leaks and passing inspection codes. After installing
More informationSubmersion/Insertion Toroidal Sensor
Instruction Manual 228 Sensor LIQ_MAN_ABR_228 May 2014 PN 51A-228 Submersion/Insertion Toroidal Sensor For additional information, please visit our website at www.rosemountanalytical.com CAUTION SENSOR/PROCESS
More informationSTC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
More informationHome. News. Products. Contact Us. Treated Swagelok Fittings--for better inertness!
New GC Accessories New GC Accessories New GC Accessories Fittings: Swagelok : Home Brass & Stainless Steel News Also available: Products Silco Fittings : Siltek & Sulfinert Also available: Info & Support
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationType 119 Control Valve
Instruction Manual Form 5204 Type 119 December 2009 Type 119 Control Valve Introduction Scope of the Manual This instruction manual provides installation, spring adjustment, maintenance, and parts information
More information60 Series Pilot Regulator
0 Series Pilot Regulator Repair Parts List www.elster-americanmeter.com Read carefully and follow all instructions shipped with this regulator. The incorrect installation of this equipment could result
More informationFlygt Ball Check Valves
4/13 Supersedes: 6/96 The basic purpose of a check valve is to permit flow in one direction, prevent flow in the opposite direction and perform this function automatically and with minimum maintenance.
More information