Occupancy sensors & PIRs

Transcription

1 Occupancy sensors & PIRs

2 Various ocations where motion sensors can be used are genera office, stairwe, corridors outdoor appications.

3 Master & save fush ceiing motion sensors Crabtree s range of occupancy sensors are designed to offer a quick and easy pug n pay instaation whist offering savings to ighting energy consumption. It is estimated that 70% of the UK s ighting consumption is used in commercia appications. Studies of severa rooms in different commercia environments instaed with occupancy sensors, show that on average, 41% of ighting costs coud be saved. By using Crabtree s pug n pay soution users can achieve these savings with a minima investment, in time and money. The versatiity of the Crabtree pug n pay instaation makes the product idea for coverage in a room shapes as we as a singe detection zone having mutipe sensor ocations. The master unit has power connected to a power suppy modue. Pug n pay is then achieved by save units connecting to each other via a suppied RJ11 cabe in a daisy chain arrangement. Further to the pug n pay Master and Save system the range is further compimented by a dedicated Ceiing and Corridor Sensor. The fush or surface mounted sensors have the argest known detection zone in the market, 24 metre diameter when fitted at optima height. The existing Crabtree Minder IP55 PIR range offers soutions for instaations in arduous conditions.

4 6004 CEIIG MASTER MOTIO SESOR Ceiing Master Motion Sensor Detection circuar 360º 8 metre diameter detection zone at 2.4 metre height Switching capacity: 1800W Incandescent 1100VA Fuorescent 1100VA Energy Saving amp Time adjustment 30 sec to 30 min Photoce: ux adjustment 5 to 1000 UX Sensor adjustment 1 metre diameter to 8 metre diameter Power box suppied with master motion sensor 5 save motion sensors can be connected in ine with 1 master motion sensor Master motion sensor comes compete with 30cm RJ12 patch cord Pastic shroud suppied to hep mask the ens if there are any undesired areas Product standards E 55015: A1:2007 E 61547: A1:2000 E :2006 E : A1: A2:2005 E : C1:2007 cause 26 E : C1:2007 E : A1: A2:2008 exc cause open showing adjustment dias CEIIG SAVE MOTIO SESOR Ceiing Save Motion Sensor 1 o wiring required Detection circuar 360º 8 metre diameter detection zone at 2.4 metre height Switching capacity: 1800W Incandescent 1100VA Fuorescent 1100VA Energy Saving amp Sensor adjustment 1 metre diameter to 8 metre diameter 5 save motion sensors can be connected in ine with 1 master motion sensor Save sensor comes compete with 5 metre RJ11 patch cord Pastic shroud suppied to hep mask the ens if there are any undesired areas Product standards E 55015: A1:2007 E 61547: A1:2000 E :2006 E : A1: A2:2005 E : C1:2007 cause 26 E : C1:2007 E : A1: A2:2008 exc cause open showing adjustment dia

5 Each power box can have not ony one MASTER sensor but aso can extend fexiby up to 5 SAVE sensors POWER BOX 30cm RJ12 Patch Cord 0.2m 1x2 RJ12 Patch Cord OTE: Master x1 Save x5 18m tota 5m 5m 6004 MASTER SESOR SAVE SESOR 5m 1x2 RJ11 Patch Cord Typica maximum ayout of master foowed by 5 saves SAVE SESOR 30cm RJ11 Patch Cord ADJUSTMETS The sensor has an adjustabe TIME O contro from 30 seconds minimum to a maximum of 30 minutes. ight wi remain on for the setting time interva after the ast movement is detected. Whie there is movement from a heat source in the detecting area the ighting wi remain on and the time wi keep resetting S 20 PUSE S 20 PUSE 30 Master ony If time adjustment is set to PUSE, the sensor wi enter short puse mode. In short puse mode, the sensor wi send a signa to the device. The signa wi be 1 sec O and 9 sec OFF. Master 6004 Save 5 Save 4 5m Save 1 Save 2 18m tota 5m Save 3 5m 1 tota S 20 PUSE 30 Master ony The UX adjustment contros the ight eve at which the unit wi switch on the ight when movement is sensed. If set to the maximum position, it wi switch during dayight. If set to the minimum position, it wi operate ony in tota darkness. Ideay it shoud be set at dusk or in the ight conditions under which the sensor and ights are expected to operate. Master 6004 Save 1 Save 3 Save 4 Save 2 Save 5 5m 5m 18m tota TEST TEST Master ony If UX adjustment is set to maximum, the sensor wi enter TEST mode. In TEST mode, the ight wi turn on for 3 sec when PIR is triggered. Check the detection area and adjust sensor to the desired ange. Afterwards, it can be switched back to desired time setting. 5m 1 tota Determine the best ocation for the sensor. Insta the sensor at east 1m away from fuorescent and HVAC ducts, and at east 1. away from incandescent fixtures and HVAC diffusers. 1. Determine the best ocation for the sensor. 2. Dri a 6m diameter hoe in the ceiing. The thickness of the ceiing must be between 5mm and 25mm. 3. Insert the power modue into the ceiing first and then fix the sensor with meta spring as shown. S TEST The sensor adjustment contros the detection range. If set to the maximum position, the detection range is about radius. If set to the minimum position, the detection range is about 0.5m radius. 360º S Master ony Power Modue HEIGHT RADIUS (M) 6m Ceiing 5-25mm 2. High Ø 8m

6 6001 CEIIG MOTIO SESOR Ceiing Motion Sensor º Detection range, fush mounting 24 metre diameter detection zone at 3 metre height Switching capacity: 1000W Incandescent 500VA Fuorescent 500VA Energy Saving amp Photoce: ux adjustment 2 to 1000 UX Time adjustment 10 sec to 20 min Sensor adjustment 4 metre diameter to 24 metre diameter Product standards E : A1: A2:2008 E : A1:2009 E 55015: A1: A2:2009 E :2006 E :2008 E 61547: A1:2000 Rear view of product CORRIDOR MOTIO SESOR Corridor Motion Sensor º Detection range, fush mounting 24 metre in ength 6 metre width detection range at 3 metre height Switching capacity: 1000W Incandescent 500VA Fuorescent 500VA Energy Saving amp Photoce: ux adjustment 2 to 1000 UX Time adjustment 10 sec to 20 min Sensor adjustment 4 metre diameter to 24 metre diameter Detection range is achieved by aigning the doube arrow aong corridor t t Product standards E : A1: A2:2008 E : A1:2009 E 55015: A1: A2:2009 E :2006 E :2008 E 61547: A1:2000 Rear view of product 6002 FUSH MOUT BACK BOX 1 Gang 47mm deep dry ining back box 10 SB632 Tie Thickness 6.35 to 15mm Dimensions 8m x 8m x 48mm Cut out dimension 7m x 7m 6003 SB632 SURFACE MOUT BACK BOX 1 Gang 39mm deep Dimensions 90mm x 90mm x 39mm

7 DETECTIO RAGE ADJUSTMETS 360º 6001 The sensor has an adjustabe TIME O contro from 10 seconds minimum to a maximum of 20 minutes (approx). ight wi remain on for the setting time interva after the ast movement is detected. Whie there is movement from a heat source in the detecting area the ighting wi remain on and the time wi keep resetting. Ø 2 High HEIGHT RADIUS (M) TIME + TIME + Minimum 10 seconds Maximum 20 minutes 360º High 6002 HEIGHT RADIUS (M) The UX adjustment contros the ight eve at which the unit wi switch on the ight when movement is sensed. If set to the maximum position, it wi switch during dayight. If set to the minimum position, it wi operate ony in tota darkness. Ideay it shoud be set at dusk or in the ight conditions under which the sensor and ights are expected to operate. 12m 12m UX UX OTE: 6002 detection range is achieved by aigning the doube arrow aong corridor. t t Minimum dark operation Maximum dayight operation The sensor adjustment contros the detection range. If set to the Maximum position +, detection range is approximatey 12m radius, if set to the Minimum position, detection range is approximatey 2m radius. SES SES + Minimum 2m detected range + Maximum 12m detected range

8 6845 MIDER 90, 220 & 280 SESORS IP55 Passive infrared motion detector which switches consumers through a timing eement when sources of heat move within its range. Minder 90 Deg PIR sensor, no remote contro, surveiance range 12m fronta, 6m atera Minder 220 Deg PIR sensor, c/w remote contro, surveiance range 16m fronta & atera Minder 280 Deg PIR sensor, c/w remote contro, surveiance range 16m fronta & atera Dimensions 102mm x 102mm x 182mm Minder 90 and 220 can be swiveed verticay Sensor head can be swiveed horizontay +/- 65 Can be wa or ceiing mounted Minder 90 and 220 offer rear-fied anti-creep protection Maximum Switching current 16AX 6846 MIDER SECURITY 220 SESOR IP55 Minder Security 220 Deg PIR sensor, c/w remote contro,surveiance range 16m fronta & atera Dimensions 102mm x 102mm x 182mm Minder 220 can be swiveed verticay Sensor head can be swiveed horizontay +/- 65 Can be wa or ceiing mounted Minder 220 offers rear-fied anti-creep protection Maximum Switching current 16AX ACIIARY ITEMS Corner mounting bracket Manua remote contro Service Manua remote contro

9 MIDER PASSIVE IFRA RED SESORS The Minder is a muti-adjustabe, passive infrared movement detector. Peope and animas radiate heat, which is invisibe to the human eye (infrared range). Consequenty, the recorded infrared energy pattern changes when they enter the detection zone DETECTIO RAGE DIAGRAMS 90º Rearfied detection 220º Rearfied detection 280º Rearfied detection 6m 6m Range up to 12m Range up to 16m Range up to 16m Minder 280 Insataation sites Be aware of trees and bushes Do not insta outside ights in detection zone Settings/Restrictions of detection 2.5m ED m 16m 220 & m The various detection eves To fuy cover the surveiance zone, the Fresne ens spits the zone into severa overapping eves. eve 1 eve 2 eve 3 eve 4 eves 1 and 2 cover remote surveiance and ensure seamess detection when the surveiance zone is entered from the outside. eve 3 covers cose range detection to prevent undetected entry of the surveiance zone cose to the wa. eve 4 covers the rearfied detection, which is activated when the front door is opened from the inside.

10 CEIIG FUSH-MOUT MASTER & SAVE OCCUPACY SESOR 6004 & SPECIFICATIO: 1. POWER: 220V to 240V ~ 50Hz. 2. Detection range: refer to fig Time adjustment: 30 sec, 1min, in, 5min, 10min, 20min, 30min (appy to Master sensor ony) 4. ux adjustment: ight eve sensing from 5 to 1000 ux. (appy to Master Sensor ony) 5. Sensitivity adjustment: 0.5m to radius. 6. Switching capacity: 1800W incandescent ight / 1100VA fuorescent ight / 1100VA Energy saving amp 7. Master sensor can be connected to up to 5 save sensors. 8. Warm up: 60 sec. 9. Test mode: ux adjustment switch to maximum. ight turns on for 3 sec in each trigger. 10. Short time puse mode: Time adjustment switch to minimum. 1 sec O, 9 sec OFF. 11. Operating temperature: -10ºC to +40ºC. 12. Storage temperature: -25ºC to +70ºC. 13. Termina capacity: 2 x 1.5mm 2. WIRIG: Warning: Products shoud be instaed by a quaified eectrician. Ensure that the sensor is fixed securey to the ceiing without any movement. 1. The phase () and neutra () conductors of the suppy cabe are connected according to termina assignment. 2. The OUTPUT phase ( ) and neutra () conductors are to be connected to the oad terminas marked and. 6001/6002 CEIIG & CORRIDOR MOUT IDOOR MOTIO SESOR SPECIFICATIO: 1. POWER: 220V to 240V ~ 50Hz. 2. Fuse: T6.3A, 250VAC. 3. Time adjustment from 10sec to 20min. 4. ux adjustment: ight eve sensing from 2 ux to 1000 ux. 5. Range of detection from 2m to 12m radius. Detection range can be adjusted using the suppied shroud stickers 6. Switching capacity: 1000W incandescent ight / 500VA fuorescent ight / 500VA Energy saving amp /6002 detection range: pease refer to the fig Auto mode / Test mode / Timer mode. 9. Operating temperature: -10ºC to +40ºC. 10. Storage temperature: -25ºC to +70ºC. 11. Termina capacity: 2 x 1.5mm 2. WIRIG: Warning: Products shoud be instaed by a quaified eectrician. Ensure that the sensor is screwed securey to the ceiing without any movement. 1. The phase () and neutra () conductors of the suppy cabe are connected according to termina assignment. 2. The output (or oad) phase ( ) and neutra () connectors are to be connected to the oad terminas marked and / 6002 ISTAATIO: 1. Fuse can be repaced by using a screwdriver to pu up the fuse. S S FIG. 2 Minimum Maximum 360º FIG. 1 High 6001 HEIGHT RADIUS (M) º Ø HEIGHT RADIUS (M) 2. High º Ø 8m 6002 High HEIGHT RADIUS (M) m 12m OTE: 6002 detection range is achieved by aigning the doube arrow aong corridor. t t

11 MIDER PASSIVE IFRA RED SESORS The Minder is a muti-adjustabe, passive infrared movement detector. Peope and animas radiate heat, which is invisibe to the human eye (infrared range). Consequenty, the recorded infrared energy pattern changes when they enter the detection zone DETECTIO RAGE DIAGRAMS Rearfied detection Additiona protection for windows and doors up to the wa of the house, even in case of instaation directy above doors and windows, is provided by the integrated rearfied detection. S 16A Standard Connection S 16A With Break Switch TECHICA DATA ISTAATIO Horizonta range of detection Max. fronta range 12m 16m 16m Max. biatera range 6m 16m 10m Water protection IP55 IP55 IP55 Switch off deay 1-3-5min 10 sec-30min 10 sec-30min Dusk sensor, in ux 3/15/ux 0,5-300/ux 0,5-300/ux Switching Capacity 3680 W/VA 3680 W/VA 3680 W/VA Max switching Current 16AX 16AX 16AX The Minder functions optimay when instaed atera to waking direction. When seecting the instaation site, ensure that: The minder is not covered by rigid or moveabe objects (e.g. roofing eements, branches of tree, etc.). When unit is instaed above, or atera to uminaires, a minimum distance is aways aowed between the unit and the uminaire, in order to prevent maoperation. when the unit is instaed beow uminaires, it is not heated up as a resut of radiant heat from the uminaire. When mounted at a height of 2.5m, the detection range is as above mentioned, though deviations in the mounting height cause changes in the detection range. In the case of specia conditions at the site (e.g. rows of trees, sma pot of and, proximity to road, etc.) the encosed masking strip can be used to restrict the detection range by sticking it on the Minder ens. Operating Temperature -25 C C -25 C C -25 C C MIDER FAUT FIDIG AAYSIS ATURE OF FAUT REASO FOR FAUT REMEDY Minder does not operate ens covered or dirty Check power suppy, uncover and/or cean ens Inadvertent operation of Minder Hot air or smoke e.g. out of kitchens activate Minder Insta Minder at a different ocation amp is permanenty on Permanent movement in the monitored area Make sure that no heat source is in the detection zone and wait unti adjusted time apse has run down.. For contro purposes, pease cover the ens competey. Minder is bridged to manua operation by additiona switch Switch to automatic operation

12 EECTRIUM SAES IMITED A SIEMES COMPAY Commercia Centre, akeside Paza, Wakmi ane, Bridgtown, Cannock WS11 0XE. emai: info@eectrium.co.uk Web: UK SAES Teephone: Facsimie: emai: crabtree.saes@eectrium.co.uk TECHICA Teephone: Facsimie: emai: crabtree.technica@eectrium.co.uk EXPORT SAES Teephone: Facsimie: emai: export@eectrium.co.uk DUBAI OFFICE Teephone: Facsimie: Athough every effort has been made to ensure accuracy in the compiation of the technica detai within this pubication, specifications and performance data are constanty changing. atest detais can be obtained from Crabtree. Pubication o. A /12 Printed in Engand.