Single sub-base valve

Similar documents

Electro-pneumatic control valves

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

3/2-way Solenoid Valve, direct-acting, NC or NO

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and Cv)

4/2-Way Pneumatic Solenoid Valve

VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control

3/2-way Mini Solenoid Valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

zamak nitrile rubber self-extinguishing technopolymer aluminum

Proportional pressure regulators VPPE

System 8. ü ( System 8

97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve

type V46, solenoid or pneumatic operated

zamak nitrile rubber self-extinguishing technopolymes aluminum

Cable Plug acc. to DIN EN , Form A

G1/4 Q8. Standard with biased position

3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223

Solenoid Valve Island Type 3965

Valves. Sub-Base Mounted Valves to ISO 5599/2

2.12. page Products for Explosion hazardous Environment

Control- and feedback head for integrated mounting on Robolux valves Type 2036

Assisted lift operated 2/2-way solenoid valves Type EV250B

3 Port Solenoid Valve

ISO /2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves

zamak nitrile rubber selfestinguishing technopolymer aluminum B10 24 V DC (± 10%) holding 0,32 W, pick-up 5,5 W (25 ms) IP65 button with tool

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

UM/ /2 or 5/3 Solenoid and air pilot actuated soft spool valves

Solenoid Valve Type 3962

Combi switchbox with integrated 3/2 way pilot valve

SOLENOID VALVES AND PNEUMATIC VALVES

4 Posiflow Proportional Solenoid Valves

5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double

AIR-AIR PRESSURE MULTIPLIER (BOOSTER)

Valve systems Base plates, according to standard ISO Brochure

Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3

On-off valves MS-EM/EE, MS series, NPT

2/2 and 3/2 Way Size 6 Seat Valves

SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4

3/2-way pneumatic cartridge solenoid valve

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

3 Port Solenoid Valve

Control block VOFA with safety function

C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890

2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS

4 Dynamic Solutions. Leadership and Innovation in Valve Products and Valve Systems

Electro-Pneumatic Bus Door Control Mechanism

Unit 24: Applications of Pneumatics and Hydraulics

TECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD

Multi-talented. Valve and valve terminal series VG

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm

UM/ /2 & 5/3 valves, solenoid and pilot actuated ISO , ISO size 1, 2, 3 & 4 Sub-base mounted

Line-Mounted Valves L Series

RPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007

Housing diameter Shaft diameter 1. Flange (Mounting of housing) Protection class shaft input (EN 60529) Protection class housing (EN 60529)

3/2- and 2/2-way cartridge valve type BVE

Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)

Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS VS VS VS VS

VSO MAX HP High Flow Proportional Valve

Solenoid Valves 3- & 4-way valves for actuator control

Solenoid valves 2/2-way direct-operated Type EV210A

2/ These vacuum switches are used in measuring ranges between -1 and 0 bar.

Solenoid/pneumatic valves, Tiger Classic

Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32

3/2 Solenoid Cartridge Valve, Size 6

10 mm Solenoid Valves. 0,6 W Power Consumption. 10,5 mm wide. 230 l/min air-flow. Service friendly design. High quality solenoid system

400 Series Buccaneer BUCCANEER POWER. bulgin

MANTA Piston Distributor for Oil and Fluid Grease

2/2 & 3/2 Solenoid operated valves

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits

Inductive sensor NI10-M18-Y1X-H1141

Series VM. Mechanical Valves VM200. VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25

D660 Series Servo-Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10

Control blocks for two-hand start ZSB

SOLENOID VALVES 3-4 WAY

Heavy Duty Solenoid Controlled Access Lock. User Manual - Original Language Version

Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm

Pneumatic actuators The Original! Technics of the top class.

Solenoid valves Type EVU

L-LAS-TB-CL serie. laser light curtains for inline measuring tasks

BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features

Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC

How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)

Mini USB and USB 2.0-IP67 Connector System

Chapter 6: Check Valves

FlowPak TM General Application Valve 1/2-4, Class 150

Actuators and Sensors. Products

LED...A Q Series Sealed High-Intensity

Precision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100.

Directional seated valves type VP 1

Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS /

Solenoid Operated Directional Valves

Digital inductive conductivity transmitter

Transcription:

solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet mini solenoid valves, 10 mm width, with manual override Telephone type (included) Single or manifold sub-base Single sub-base includes M3x0,5 connections for tube int. Ø 2,7. Manifold subbase is M5x0,8 (not included) -10...50 C (14...122 F) Filtered compressed air 0...7 (0...101 psi) 19 l/min (diameter Ø 0,8 mm) M3 x 0,5 (with single sub-base) M5 x 0,8 (with manifold sub-base) 24 V DC 1,2 watt Single sub-base valve NC mini-solenoid 0.900.000.461/-- - valve 10 mm width Manifold sub-base valve Valves qty. 2 0.900.000.462 3 0.900.000.463 4 0.900.000.464 5 0.900.000.465 6 0.900.000.466 7 0.900.000.467 8 0.900.000.468 9 0.900.000.469 10 0.900.000.470 2.2.1.1

solenoid valves Mini-valves 15 mm Electrical connection... Mounting... Rated temperature... Fluid... Working pressure... Nominal flow... Port size... Voltage... Power... LED indicator... NC poppet mini solenoid valves, 15 mm width, with manual override DIN 43650-C socket plug (included) Single or manifold sub-base -10...50 C (14...122 F) Filtered compressed air 0...8 (29...116 psi) 16 l/min (diameter Ø 0,8 mm) M5 x 0,8 24 V DC (consult for other voltages) 1 watt Option 2 Single sub-base valve NC mini-solenoid 0.900.000.471/-- - valve 15 mm width LED indicator 0.900.000.481 Manifold sub-base valve Valves qty. 2 0.900.000.472 3 0.900.000.473 4 0.900.000.474 5 0.900.000.475 6 0.900.000.476 7 0.900.000.477 8 0.900.000.478 9 0.900.000.479 10 0.900.000.480 2.2.1.2

solenoid valves 203 series - M5 Mounting... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... NC poppet solenoid valves, 22 mm width, with manual override Single or manifold assembly -5...50 C (23...122 F) -10...60 C (14...140 F) Filtered compressed air - Inert gases 0...10 (0...145 psi) 40 l/min (0,04 Cv) max. 24 Hz (at 6 ) Zinc alloy housing, epoxi resin encapsulated solenoid coil, stainless steel and brass armature tube Valves are provided with a M5x0,8 plug. If intended to be used in manifold, remove this plug. If intended to be used for single application, place an appropriate thread seal. normally 0.210.005.200/-- - closed solenoid valve Additional code Manifold kit Voltage 101 220V 50Hz - 240V 60Hz 102 110V 50Hz - 120V 60Hz 137 48V 50Hz - 48V 60Hz 103 24V 50Hz - 24V 60Hz 104 12V 50Hz - 12V 60Hz 105 220V 60Hz 106 110V 60Hz 109 190 V DC 110 110 V DC 111 48 V DC 112 24 V DC 113 12 V DC To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.210.005.200 / - - - with voltage 220V 50Hz, should be ordered as 0.210.005.200 / 101 Valves qty. 2 0.200.000.442 3 0.200.000.443 4 0.200.000.444 5 0.200.000.445 6 0.200.000.446 7 0.200.000.447 8 0.200.000.448 9 0.200.000.449 10 0.200.000.450 When ordering a manifold, ask also the necessary quantity of valves. 2.2.2.1

2/2 and solenoid valves 213 series - 1/8" Mounting... Electrical connection... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... Special version... 2/2 and poppet solenoid valves, 32 mm width, with manual override Single mounting with side or bottom connections; manifold mounting DIN 43650-A socket plug (included) -5...50 C (23...122 ºF) -10...60 ºC (14...140 ºF) Filtered compressed air - Inert gases 0...2,5 0...10 0...16 (0...36 psi) (0...145 psi) (0...232 psi) 78 l/min(*) 115 l/min 40 l/min (0,08 Cv) (0,12 Cv) (0,04 Cv) 23 Hz (1,5 ) 17 Hz (6 ) 13 Hz (10 ) Zinc alloy housing, epoxi resin encapsulated solenoid coil, stainless steel and brass armature tube Hydraulic or pneumatic use up to 30 (435 psi). 2 (*) With p=2,5, p=0,5 Desciption Ports position 0...2,5 0...10 0...16 Side 0.210.003.911 0.210.004.011 0.210.004.111 2/2 normally Bottom 0.210.004.211 0.210.004.311 0.210.004.411 /--- closed solenoid valve Manifold 0.210.006.311 0.210.006.411 0.210.006.511 Side 0.210.004.511 0.210.004.611 0.210.004.711 2/2 normally Bottom 0.210.004.811 0.210.004.911 0.210.005.011 open solenoid valve Side 0.210.005.111 0.210.005.211 0.210.005.311 normally Bottom 0.210.005.411 0.210.005.511 0.210.005.611 closed solenoid valve Manifold 0.210.006.611 0.210.006.711 0.210.006.811 Side 0.210.005.711 0.210.005.811 0.210.005.911 normally Bottom 0.210.006.011 0.210.006.111 0.210.006.211 open solenoid valve Hydraulic use solenoid valves Connectio n HD type HP type 2/2 normally Side 0.210.007.211 0.210.006.911 closed solenoid valve Bottom 0.210.007.311 0.210.007.011 hydraulic use Manifold 0.210.007.411 0.210.007.111 Special version for hydraulic oil at pressure 0...30. Nominal Ø1mm. Nominal flow 2,8 l/min. HP type is supplied from port 2 and exhausted by port 1. HD type is supplied from port 1 and exhausted by port 2. Additional code Voltage 001 220V 50Hz - 240V 60Hz 002 110V 50Hz - 120V 60Hz 037 48V 50Hz - 48V 60Hz 003 24V 50Hz 004 12V 50Hz 005 220V 60Hz 006 110V 60Hz 007 24V 60Hz 008 12V 60Hz 009 190 V DC 010 110 V DC 011 48 V DC 012 24 V DC 013 12 V DC To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.210.005.211 / - - - with voltage 220V 50Hz, should be ordered as 0.210.005.211 / 001 2.2.3.1

2/2 and solenoid valves 213 series - 1/8" NC solenoid valve side connection NC solenoid valve bottom connection NO solenoid valve side connection NO solenoid valve bottom connection Manifold mounting solenoid valve Manifold kit Valves qty. Manifold kit bottom connection Manifold kit side connection Manifold mounting with bottom connection for air supply 2 0.200.000.472 0.200.000.462 3 0.200.000.473 0.200.000.463 4 0.200.000.474 0.200.000.464 5 0.200.000.475 0.200.000.465 6 0.200.000.476 0.200.000.466 7 0.200.000.477 0.200.000.467 8 0.200.000.478 0.200.000.468 9 0.200.000.479 0.200.000.469 10 0.200.000.480 0.200.000.470 When ordering a manifold, ask also the necessary quantity of valves. Manifolds are only possible with NC valves. Manifold mounting with side connection for air supply Accessories Pressure separator 0.200.000.053 Separating seal 0.000.010.013 Manual override 0.200.000.089 Upper threaded connection 0.200.000.040 2.2.3.2

and directional control valves SB 0 series - 1/8" Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... and spool valves, or operated, with manual override Single mounting; manifold or manifold plate mounting Working: G 1/8 - Pilot: M5x0,8-5...50 C (23...122 ºF) -10...60 ºC (14...140 ºF) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 420 l/min (0,42 Cv) 24 Hz (with at 6 ) Zinc alloy housing, stainless steel spool, NBR seals 2 Working pressure Spare kit 1,5...10 0.220.001.311 0.200.000.509, 2,5...10 0.220.001.511 0.200.000.510, 0,5...10 0.220.001.711 0.200.000.511 2,5...10 0.220.001.911 0.200.000.525 2,5...10 0.220.002.11 1 0.200.000.525 2,5...10 0.220.008.11 1 0.200.000.525 1,5...10 0.220.002.311 0.200.000.512 2,5...10 0.220.002.511 0.200.000.513 0,5...10 0.220.002.711 0.200.000.514 2,5...10 0.220.002.911 0.200.000.524 2,5...10 0.220.003.111 0.200.000.524 2,5...10 0.220.008.311 0.200.000.524 To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.220.002.311 / - - - with voltage 220V 50Hz, should be ordered as 0.220.002.311 / 101 Additional code / Ñ- Voltage 101 220V 50Hz - 240V 60Hz 102 110V 50Hz - 120V 60Hz 137 48V 50Hz - 48V 60Hz 103 24V 50Hz - 24V 60Hz 104 12V 50Hz - 12V 60Hz 105 220V 60Hz 106 110V 60Hz 109 190 V DC 110 110 V DC 111 48 V DC 112 24 V DC 113 12 V DC 2.2.4.1

and directional control valves SB 0 series - 1/8" Pneumatic actuated valve Single solenoid actuated valve Double solenoid actuated valve Manifold options When ordering a manifold, ask also the necessary quantity of valves. Valves qty. Manifold Valves qty. Manifold plate 2 0.200.000.132 3 0.200.000.133 4 0.200.000.134 5 0.200.000.135 6 0.200.000.136 2 0.200.000.142 3 0.200.000.143 4 0.200.000.144 5 0.200.000.145 6 0.200.000.146 7 0.200.000.147 8 0.200.000.148 2.2.4.2

and directional control valves SB 0 series, surface mounting - 1/8" Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... and spool valves, or operated, with manual override Surface mounted directly or by means an appropiate adaptor plate. Mounting seals and screws are included Working: G 1/8 - Pilot: M5x0,8-5...50 C (23...122 ºF) -10...60 ºC (14...140 ºF) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 420 l/min (0,42 Cv) 24 Hz (with at 6 ) Zinc alloy housing, stainless steel spool, NBR seals 2 Working pressure Spare kit 1,5...10 0.220.011.31 1 0.200.000.509, 2,5...10 0.220.011.51 1 0.200.000.510, 0,5...10 0.220.011.71 1 0.200.000.511 2,5...10 0.220.011.91 1 0.200.000.525 2,5...10 0.220.012.11 1 0.200.000.525 2,5...10 0.220.018.11 1 0.200.000.525 1,5...10 0.220.012.311 0.200.000.512 2,5...10 0.220.012.511 0.200.000.513 0,5...10 0.220.012.711 0.200.000.514 2,5...10 0.220.012.911 0.200.000.524 2,5...10 0.220.013.111 0.200.000.524 2,5...10 0.220.018.311 0.200.000.524 To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.220.012.311 / - - - with voltage 220V 50Hz, should be ordered as 0.220.012.311 / 101 Additional code Voltage 101 220V 50Hz - 240V 60Hz 102 110V 50Hz - 120V 60Hz 137 48V 50Hz - 48V 60Hz 103 24V 50Hz - 24V 60Hz 104 12V 50Hz - 12V 60Hz 105 220V 60Hz 106 110V 60Hz 109 190 V DC 110 110 V DC 111 48 V DC 112 24 V DC 113 12 V DC 2.2.4.3

and directional control valves SB 0 series, surface mounting - 1/8" Pneumatic actuated valve Single solenoid actuated valve Double solenoid actuated valve 2.2.4.4

, and 2x directional control valves VM15 series - 1/8 Ways / Positions... Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... Spool valves, or operated, with manual override - - 2x valves in the same housing Inline Working: G 1/8 - Pilot: M3x0,5 - Pilot air exhaust: M3x0,5-5...50 C (23...122 F) -10...60 C (14...140 F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 850 l/min (0,85 Cv) ( and version) 24 Hz (with at 6 ) Aluminum housing, stainless steel spool, NBR seals 2 Working pressure Spare kit To obtain the maximum flow available in these valves, it is recommended to use G1/8 push-in fittings with enlarged nominal diameter (see page 2.2.4.11). 2,5...8 0.251.001.311 0.200.000.958 2,5...8 0.251.001.511 0.200.000.958 1...8 0.251.001.711 0.200.000.958 2,5...8 0.251.001.911 0.200.000.958 2,5...8 0.251.002.11 1 0.200.000.958 2,5...8 0.251.008.11 1 0.200.000.958 2,5...8 0.251.002.311 0.200.000.959 2,5...8 0.251.002.511 0.200.000.959 1...8 0.251.002.711 0.200.000.994 2,5...8 0.251.002.911 0.200.000.994 2,5...8 0.251.003.111 0.200.000.994 2,5...8 0.251.008.311 0.200.000.994 To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.251.002.311 / - - - with voltage 220V 50Hz, should be ordered as 0.251.002.311 / 901 Additional code Voltage 901 220/230V - 50/60Hz 902 110V - 50/60Hz 937 48V - 50/60Hz 903 24V - 50/60Hz 923 24 V DC 913 12 V DC 2.2.4.10

, and 2x directional control valves VM15 series - 1/8 2 x Valves Working pressure Spare kit 2 x NC s 2,5...8 0.251.008.511 0.200.000.958 2 x NO 2,5...8 0.251.008.711 0.200.000.958 s 2 x NO + NC 2,5...8 0.251.008.911 0.200.000.958 s 2 x NC 2,5...8 0.251.009.111 0.200.000.994 s 2 x NO 2,5...8 0.251.009.311 0.200.000.994 s 2 x NO + NC 2,5...8 0.251.009.511 0.200.000.994 s Pneumatic actuated valve Single solenoid actuated valve Double solenoid actuated valve Pneumatic connection Any connector from chapter 7 can be used. Although, to obtain the maximum flow available in VM15 valves, it is recommended to use G1/8 push-in fittings with enlarged nominal diameter shown below. Type Threa d Tube outer diameter Recto M3x0, 5 4 0.431.010.409 Codo M3x0, 5 4 0.431.990.409 R ecto G 1/8" 8 0.431.010.811 2.2.4.11

, and 2x directional control valves VM15-B series - 1/8 Ways / Positions... Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency... Materials... Spool valves, or operated, with manual override - - 2x valves in the same housing Manifold mounting: plate mounting, multi-pin station or field bus station Working: G 1/8 - Pilot: M3x0,5 - Pilot air exhaust: M3x0,5-5...50 C (23...122 F) -10...60 C (14...140 F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 850 l/min (0,85 Cv) ( and version) 24 Hz (with at 6 ) Aluminum housing, stainless steel spool, NBR seals 2 Working pressure Spare kit To obtain the maximum flow available in these valves, it is recommended to use G1/8 push-in fittings with enlarged nominal diameter (see page 2.2.4.11). 2,5...8 0.252.001.311 0.200.000.958 2,5...8 0.252.001.511 0.200.000.958 1...8 0.252.001.711 0.200.000.958 2,5...8 0.252.001.911 0.200.000.958 2,5...8 0.252.002.11 1 0.200.000.958 2,5...8 0.252.008.11 1 0.200.000.958 2,5...8 0.252.002.311 0.200.000.959 2,5...8 0.252.002.511 0.200.000.959 1...8 0.252.002.711 0.200.000.994 2,5...8 0.252.002.911 0.200.000.994 2,5...8 0.252.003.111 0.200.000.994 2,5...8 0.252.008.311 0.200.000.994 To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.252.002.311 / - - - with voltage 220V 50Hz, should be ordered as 0.252.002.311 / 901 Additional code Voltage 901 220/230V - 50/60Hz 902 110V - 50/60Hz 937 48V - 50/60Hz 903 24V - 50/60Hz 923 24 V DC 913 12 V DC 2.2.4.20

, and 2x directional control valves VM15-B series - 1/8 Valves Working pressure Spare kit 2 x NC s 2,5...8 0.252.008.511 0.200.000.958 2 x NO 2,5...8 0.252.008.711 0.200.000.958 s 2 x NO + NC 2,5...8 0.252.008.911 0.200.000.958 s 2 x NC 2,5...8 0.252.009.111 0.200.000.994 s 2 x NO 2,5...8 0.252.009.311 0.200.000.994 s 2 x NO + NC 2,5...8 0.252.009.511 0.200.000.994 s Manifold plate mounting When ordering a manifold, ask also the necessary quantity of valves. Valves qty. Manifold plate 4 0.200.000.944 6 0.200.000.946 8 0.200.000.948 10 0.200.000.950 12 0.200.000.952 Accessories Blanking plate 0.200.000.941 Pressure separator 0.200.000.955 Plane mounting bracket (A) 0.200.000.956 DIN Rail mounting 0.200.000.957 2.2.4.21

, and 2x directional control valves VM15-B series - 1/8 multi-pin station Electrical connection... Voltage... Indicators... Degree of protection... Port sizes... Available valves... Ambient temperature... Multi-pin solenoid valve station SUB-D 25 connector plug for Ø10mm multiwire cable, 0,20 mm 2 section 24 V DC LED and protection circuit for each solenoid IP65 acc. IEC 529 (with the socket adjusted) Supply: G 3/8 - Working: G 1/8 - Pilot: M3x0,5 - Pilot air exhaust: M3x0,5 (includes 2xG3/8 exhaust silencers and 3xG3/8 plugs) Any valve shown in page 2.2.4.20 and 2.2.4.21-5...50 C (23...122 F) 2 Note: the multi-pin stations are delivered totally mounted, connected and tested. Ask for assistance from a MICRO consultant or ask for the coding software aid. Multi-pin station base 4 positions 6 positions 8 positions 10 positions 12 positions Simgle solenoid valve 0.200.000.960 0.200.000.961 0.200.000.962 0.200.000.963 0.200.000.964 Double solenoid valve 0.200.000.965 0.200.000.966 0.200.000.967 0.200.000.968 - Connector wiring A: Plane mounting bracket B: Manual override Accesories Blanking plate (valve) 0.200.000.941 Pressure separator 0.200.000.955 Blanking plate (electrical) 0.200.000.954 SUB-D 25 terminal 0.200.000.981 Terminal with 5 m cable 0.200.000.982 Terminal with 10 m cable 0.200.000.983 Plane mounting bracket (A) 0.200.000.956 DIN Rail mounting 0.200.000.957 Pin C able colour P os. Solen. unctio n 1 Red 14 V1 2 Orang e 12 3 Light green 14 V2 4 Yellow 12 5 Violet 14 V3 6 Light pink 12 7 Light broun 14 V4 8 White 12 9 Grey 14 V5 10 Dark blue 12 11 Dark broun 14 24 Vcc V6 12 Dark green 12 13 Skay-blue 14 V7 14 Dark + Yellow 12 15 Dark broun + Yellow 14 V8 16 Green Yellowish 12 17 Light green + Yellow 14 V9 18 Black 12 19 Dark pink 14 V10 20 Light broun + Yellow 12 21 Grey + Black V11 14 22 Light blue - - ree 23 Grey + Yellow V12 14 24 Vcc 24 Blue + Yellow - - 0 V 25 White Yellowish - - 0 V 2.2.4.22

, and 2x directional control valves VM15-B series - 1/8 AS-i field bus station Electrical connection... Electrical supply... Quiescent current... Switching threshold of inputs... Indicators... Degree of protection... Port sizes... Available valves... Ambient temperature... Pneumatic valve station with AS-i protocol interface AS-i yellow flat cable (option AS-i black cable for external power supply) Inputs: M8 connector AS-i power supply via yellow flat cable 20 ma (with input=0, output=0) 1,5 ma (low level) - 5 ma (high level) LED and protection circuit for each solenoid IP65 acc. IEC 529 Supply: G 3/8 - Working: G 1/8 - Pilot: M3x0,5 - Pilot air exhaust: M3x0,5 (includes 2xG3/8 exhaust silencers and 3xG3/8 plugs) Any valve shown in page 2.2.4.20 and 2.2.4.21-5...50 C (23...122 F) AS-I station bases Inputs and Outputs Without external power supply With external power supply Single solenoid Double solenoid (*) Single solenoid Single solenoid Double solenoid Single solenoid 4I / 4O 0.200.000.979 0.200.001.101 4I / 4O 0.200.000.980 0.200.001.102 8I / 4O 0.200.000.995 0.200.001.104 8I / 8O 0.200.000.996 0.200.001.105 8I / 8O 0.200.000.997 0.200.001.106 16I / 8O 0.200.000.998 0.200.001.107 (*) Only 2 valves are mounted, 2 blanking plates included. Single solenoid valves 4I / 4O Double solenoid valves 4I / 4O A: Plane Mounting bracket B: Manual override 2.2.4.23

, and 2x directional control valves VM15-B series - 1/8 AS-i field bus station Single solenoid valves 8I / 4O 2 Single solenoid valves 8I / 8O A: Plane Mounting bracket B: Manual override 2.2.4.24

, and 2x directional control valves VM15-B series - 1/8 AS-i field bus station Double solenoid valves 8I / 8O Single solenoid valves 16I / 8O A: Plane Mounting bracket B: Manual override Accesories Blanking plate 0.200.000.941 Pressure separator 0.200.000.955 Plane mounting bracket (A) 0.200.000.956 DIN Rail mounting 0.200.000.957 Note: the field-bus stations are delivered totally mounted, connected and tested. Ask for assistance from a MICRO consultant for coding. 2.2.4.25

and directional control valves SB 1 series - 1/4 Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency (at 6 )... Materials... and spool valves, or operated, with manual override Single mounting; manifold or manifold plate mounting Working: G 1/4 - Pilot: M5x0,8-5...50 C (23...122 F) -10...60 C (14...140 F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 1000 l/min (1,016 Cv) 18 Hz () 16 Hz () Zinc alloy housing, aluminum spool, NBR seals 2 Working pressure Spare kit 1,5...10 0.220.001.322 0.200.000.176 2,5...10 0.220.001.522 0.200.000.177 0,5...10 0.220.001.722 0.200.000.178 2,5...10 0.220.001.922 0.200.000.527 2,5...10 0.220.002.122 0.200.000.527 2,5...10 0.220.008.122 0.200.000.527 1,5...10 0.220.002.322 0.200.000.182 2,5...10 0.220.002.522 0.200.000.183 0,5...10 0.220.002.722 0.200.000.184 2,5...10 0.220.002.922 0.200.000.526 2,5...10 0.220.003.122 0.200.000.526 2,5...10 0.220.008.322 0.200.000.526 To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.220.002.322 / - - - with voltage 220V 50Hz, should be ordered as 0.220.002.322 / 101 Additional code Voltage 101 220V 50Hz - 240V 60Hz 102 110V 50Hz - 120V 60Hz 137 48V 50Hz - 48V 60Hz 103 24V 50Hz - 24V 60Hz 104 12V 50Hz - 12V 60Hz 105 220V 60Hz 106 110V 60Hz 109 190 V DC 110 110 V DC 111 48 V DC 112 24 V DC 113 12 V DC 2.2.5.1

and directional control valves SB 1 series - 1/4 Pneumatic actuated valve Single solenoid actuated valve Double solenoid actuated valve Manifold Valves qty. 2 0.200.000.162 3 0.200.000.163 4 0.200.000.164 5 0.200.000.165 6 0.200.000.166 When ordering a manifold, ask also the necessary quantity of valves. Manifold plate Valves qty. 2 0.200.000.502 3 0.200.000.503 4 0.200.000.504 5 0.200.000.505 6 0.200.000.506 7 0.200.000.507 8 0.200.000.508 When ordering a manifold, ask also the necessary quantity of valves. 2.2.5.2

, and directional control valves SB 1 series - 1/4 NAMUR mounting Mounting... Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Frequency (at 6 )... Materials..., and spool valves, or operated, with manual override NAMUR pattern surface mounting Working: G 1/4 - Pilot: M5x0,8-5...50 C (23...122 F) -10...60 C (14...140 F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 1000 l/min (1,016 Cv) 18 Hz () 16 Hz () Zinc alloy housing, aluminum spool, NBR seals 2 Two M5x35 fixing screws, one M5x10 positioning screw and two O rings are included. Version includes an adapter plate. Working pressure Spare kit 1,5...10 0.220.011.32 2 0.200.000.176 2,5...10 0.220.011.52 2 0.200.000.177 0,5...10 0.220.011.72 2 0.200.000.178 2,5...10 0.220.011.92 2 0.200.000.527 2,5...10 0.220.012.122 0.200.000.527 2,5...10 0.220.018.122 0.200.000.527 1,5...10 0.220.012.322 0.200.000.182 2,5...10 0.220.012.522 0.200.000.183 0,5...10 0.220.012.722 0.200.000.184 2,5...10 0.220.012.922 0.200.000.526 2,5...10 0.220.013.122 0.200.000.526 2,5...10 0.220.018.322 0.200.000.526 To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.220.012.322 / - - - with voltage 220V 50Hz, should be ordered as 0.220.012.322 / 101 For explosion-proof solenoids, see chapter 5. Additional code Voltage 101 220V 50Hz - 240V 60Hz 102 110V 50Hz - 120V 60Hz 137 48V 50Hz - 48V 60Hz 103 24V 50Hz - 24V 60Hz 104 12V 50Hz - 12V 60Hz 105 220V 60Hz 106 110V 60Hz 109 190 V DC 110 110 V DC 111 48 V DC 112 24 V DC 113 12 V DC 2.2.5.3

, and directional control valves SB 1 series - 1/4 NAMUR mounting valves Working pressure Spare kit 1,5...10 0.220.021.322 0.200.000.176, 2,5...10 0.220.021.522 0.200.000.177, 0,5...10 0.220.021.722 0.200.000.178 1,5...10 0.220.022.322 0.200.000.182 2,5...10 0.220.022.522 0.200.000.183 0,5...10 0.220.022.722 0.200.000.184 Pneumatic actuated valve ( and ) Single solenoid actuated valve ( and ) Double solenoid actuated valve ( and ) 2.2.5.4

and directional control valves CH1 NG series - 1/4 Port sizes... Electric operator... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow ()... Nominal flow ()... Materials... and spool valves, or operated Working: G 1/4 - Pilot: M5x0,8 Electric operator with manual override (option CNOMO standard) -5...50 C (23...122 F) -10...60 C (14...140 F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 1650 l/min (1,6 Cv) 1000 l/min (1,0 Cv) Zinc alloy housing, hard anodized aluminum spool, NBR seals 2 Working pressure 0.250.001.322 0.250.001.522 1...10 0.250.001.722 0.250.001.922 0.250.002.122 0.250.008.122 0.250.002.322 0.250.002.522 1...10 0.250.002.722 0.250.002.922 0.250.003.122 0.250.008.322 Operators spare kits Pneumati c 0.200.000.653 ( 1) "NG" versions 0.200.000.828 (1) Electrical 0.200.000.654 0.200.000.829 (1) To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.250.002.322 / - - - with voltage 220V 50Hz, should be ordered as 0.250.002.322 / 101 Additional code Voltage 101 220V 50Hz - 240V 60Hz 102 110V 50Hz - 120V 60Hz 137 48V 50Hz - 48V 60Hz 103 24V 50Hz - 24V 60Hz 104 12V 50Hz - 12V 60Hz 105 220V 60Hz 106 110V 60Hz 109 190 V DC 110 110 V DC 111 48 V DC 112 24 V DC 113 12 V DC 2.2.6.1

and directional control valves CH1 NG series - 1/4 Pneumatic actuated valve Single solenoid actuated valve Double solenoid actuated valve 2.2.6.2

and directional control valves CH1 NG series - 1/4 Manifold Valves qty. 2 0.200.000.802 3 0.200.000.803 4 0.200.000.804 5 0.200.000.805 6 0.200.000.806 7 0.200.000.807 8 0.200.000.808 9 0.200.000.809 10 0.200.000.810 2 Blanking plate 0.200.000.801 When ordering a manifold, ask also the necessary quantity of valves. Blanking plate is used for spare valve positions. Manifold plate Valves qty. 2 0.200.000.672 3 0.200.000.673 4 0.200.000.674 5 0.200.000.675 6 0.200.000.676 7 0.200.000.677 8 0.200.000.678 9 0.200.000.679 10 0.200.000.680 Blanking plate 0.200.000.651 When ordering a manifold, ask also the necessary quantity of valves. Blanking plate is used for spare valve positions. 2.2.6.3

, and directional control valves CH1 NG series - 1/4 NAMUR mounting Mounting... Port sizes... Electric operator... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow ()... Nominal flow ()... Materials..., and spool valves, or operated NAMUR pattern surface mounting Working: G 1/4 - Pilot: M5x0,8 Electric operator with manual override (option CNOMO standard) -5...50 C (23...122 F) -10...60 C (14...140 F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 1650 l/min (1,6 Cv) 1000 l/min (1,0 Cv) Zinc alloy housing, hard anodized aluminum spool, NBR seals Two M5x35 fixing screws, one M5x10 positioning screw and two O rings are included. Version includes an adapter plate. Working pressure 0.250.011.32 2 0.250.011.52 2 1...10 0.250.011.72 2 0.250.011.92 2 0.250.012.122 0.250.018.122 0.250.012.322 0.250.012.522 1...10 0.250.012.722 0.250.012.922 0.250.013.122 0.250.018.322 Operators spare kits Pneumati c 0.200.000.653 ( 1) "NG" versions 0.200.000.828 (1) Electrical 0.200.000.654 0.200.000.829 (1) To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.250.012.322 / - - - with voltage 220V 50Hz, should be ordered as 0.250.012.322 / 101 For explosion-proof or low consumption solenoids, see chapter 5. Additional code Voltage 101 220V 50Hz - 240V 60Hz 102 110V 50Hz - 120V 60Hz 137 48V 50Hz - 48V 60Hz 103 24V 50Hz - 24V 60Hz 104 12V 50Hz - 12V 60Hz 105 220V 60Hz 106 110V 60Hz 109 190 V DC 110 110 V DC 111 48 V DC 112 24 V DC 113 12 V DC 2.2.6.4

, and directional control valves CH1 NG series - 1/4 NAMUR mounting valves Working pressure Spare kit 1,5...10 0.250.021.322 0.200.000.681, 2,5...10 0.250.021.522 0.200.000.681, 0,5...10 0.250.021.722 0.200.000.681 2 1,5...10 0.250.022.322 0.200.000.682 2,5...10 0.250.022.522 0.200.000.682 0,5...10 0.250.022.722 0.200.000.682 Pneumatic actuated valve ( and ) Single solenoid actuated valve ( and ) Double solenoid actuated valve ( and ) 2.2.6.5

directional control valves CH1 NG series - 1/4 Port sizes... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow... Materials... spool valves, or operated Working: G 1/4 - Pilot: M5x0,8-5...50 C (23...122 F) -10...60 C (14...140 F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 1650 l/min (1,6 Cv) Zinc alloy housing, hard anodized aluminum spool, NBR seals Working pressure 0.250.031.322, 0.250.031.522, 1...10 0.250.031.722 0.250.032.322 0.250.032.522 1...10 0.250.032.722 Spare kits for Pneumati c 0.200.000.828 Electro-pneumatic 0.200.000.829 To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.250.032.322 / - - - with voltage 220V 50Hz, should be ordered as 0.250.032.322 / 101 For explosion-proof or low consumption solenoids, see chapter 5. Additional code Voltage 101 220V 50Hz - 240V 60Hz 102 110V 50Hz - 120V 60Hz 137 48V 50Hz - 48V 60Hz 103 24V 50Hz - 24V 60Hz 104 12V 50Hz - 12V 60Hz 105 220V 60Hz 106 110V 60Hz 109 190 V DC 110 110 V DC 111 48 V DC 112 24 V DC 113 12 V DC 2.2.6.6

directional control valves CH1 NG series - 1/4 Pneumatic actuated valve 2 Single solenoid actuated valve Double solenoid actuated valve 2.2.6.7

and directional control valves CH 3 series - 1/2 Port sizes... Electric operator... Rated temperature... Medium temperature... Fluid... Working pressure... Nominal flow ()... Nominal flow ()... Materials... and spool valves, or operated Working: G1/2 - Pilot: G1/8 CNOMO standard electric operator with manual override -5...50 C (23...122 F) -10...60 C (14...140 F) Filtered compressed air (lubrication recommended) - Inert gases See table for each model 4200 l/min (4,2 Cv) 4000 l/min (4,0 Cv) Zinc alloy housing, hard anodized aluminum spool, NBR seals Working pressure Spare kit 0.250.001.344 0.250.001.544 1...10 0.250.001.744 0.250.001.944 0.250.002.144 0.250.008.144 0.250.002.344 0.250.002.544 1...10 0.250.002.744 0.250.002.944 0.250.003.144 0.250.008.344 Operators spare kits Pneumati c 0.200.000.681 Electrical 0.200.000.682 To specify solenoid voltage, dashes must be replaced by values in the table. i.e.: a valve 0.250.002.344 / - - - with voltage 220V 50Hz, should be ordered as 0.250.002.344 / 101 Additional code Voltage 101 220V 50Hz - 240V 60Hz 102 110V 50Hz - 120V 60Hz 137 48V 50Hz - 48V 60Hz 103 24V 50Hz - 24V 60Hz 104 12V 50Hz - 12V 60Hz 105 220V 60Hz 106 110V 60Hz 109 190 V DC 110 110 V DC 111 48 V DC 112 24 V DC 113 12 V DC 2.2.7.1

and directional control valves CH 3 series - 1/2 Single solenoid actuated valve Double solenoid actuated valve 2 Pneumatic actuated valve Manifold Valves qty. 2 0.200.000.842 3 0.200.000.843 4 0.200.000.844 5 0.200.000.845 6 0.200.000.846 Blanking plate 0.200.000.841 When ordering a manifold, ask also the necessary quantity of valves. Blanking plate is used for spare valve positions. 2.2.7.2