Series VM. Mechanical Valves VM200. VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25
|
|
- Roxanne Daniel
- 7 years ago
- Views:
Transcription
1 Mechanical Valves Series VM Model Dimensions (mm) VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25 VM100 Side ported 17 x 44 x 25 Bottom ported 17 x 44 x 30 VM x 40 x 52 One way roller lever Straight plunger Roller plunger Cross roller plunger Toggle lever Push button (Mushroom) Push button (Extended) Push button (Flush) Twist selector (2 position) Key selector (2 position) Twist selector (3 position) Foot pedal Push-pull Effective area (mm 2 ) Number of ports 1 2, 3 Poppet P P P , 3 Poppet 19 2, 3 Poppet Function 5-6-2
2 Mechanical Valves Series VM Mechanical Valves VM x 35 x 53 VZM x 28 x 87 VZM x 30 x 91 VFM x 35 x 94 VFM x 40 x 115 VM x 40 x 57 VM VR VH VHS Adjustable roller lever Adjustable rod lever P Balanced poppet Rubber spool P P P P P Metal spool 18 5 Rubber spool 18 5 Metal spool 6 3 Balanced poppet Dual pressure is available only on external pilot
3 Mechanical Valves Series VM Precautions Be sure to read before handling. Refer to pages to 6 for Safety lnstructions and Solenoid Valve Precautions. Mounting Warning 1. Conditions for mechanical operation Do not move the mechanical operation beyond the operating limit position, as this could damage the mechanical valve itself and lead to equipment malfunction. Actuator stroke Operate the mechanism within the stroke range that has been obtained through the formula given below. (Do not move beyond the operating limit position.) Operating stroke: ( x ) to ( + 0.1) Series Actuator Actuator stroke (mm) = 4.8 mm 3.7 to 4.7 ( = 2.5 mm) (2.2 to 2.4) VM to 4.4 One way roller lever 3.5 to to to 5.3 VM100 One way roller lever 4.3 to 5.3 Straight plunger 2.7 to 3.4 Roller plunger 2.7 to 3.4 Cross roller plunger 2.7 to to to 10.7 VM200 One way roller lever 9.5 to 11.7 Straight plunger 4.5 to 5.4 Roller plunger 4.5 to 5.4 Cross roller plunger 4.5 to to to 8.2 VM400 One way roller lever 6.5 to 8.7 Straight plunger 4.5 to 5.4 Roller plunger 4.5 to 5.4 Cross roller plunger 4.5 to to 2.9 VZM to 6.0 VZM400 One way roller lever 4.7 to 6.7 VFM300 VFM200 Straight plunger 2.5 to 3.4 Roller plunger 2.5 to 3.4 For straight and roller plunger types, there is a groove indicating and for stroke adjustment. Definition of Symbol F.P. (Free Position) No external force applied. O.P. (Operating Position) Internal valve opening position. P. (Total Travel Position) Includes over travel. O.F. (Operating Force) Operating force required to initial valve opening position. F.O.F. (Full Operating Force) Required force to total travel position. (Pre-travel) From free position to initial valve operating position. (Over Travel) From initial valve operating position to total travel position. (Total Travel) From free position to total travel position. Caution This product cannot be used for applications in which the pressure must be sealed because there will be a slight leakage. Please consult with SMC for this type of application. VM VR VH VHS Warning Pressure Source Operable fluid is either air or inert gas only. It cannot be used for corrosive gas and fluid. Caution When using vacuum pressure for VM100, supply vacuum pressure to P port
4 Series VM Precautions Be sure to read before handling. Refer to pages to 6 for Safety lnstructions and Solenoid Valve Precautions. Warning 2. Conditions for mechanical operation Cam and dog angle and maximum speed Select the angle and the maximum speed of the operating cam and the dog of the mechanism from within the selection range given in the table below. If they are operated beyond the selection range, the cam and the dog could apply impact shocks to the actuator, leading to damage. Series VM1000 VM100 VM200 VM400 VZM500 VZM400 VFM300 VFM200 VM800 Actuator One way roller lever One way roller lever Straight plunger Roller plunger Cross roller plunger One way roller lever Straight plunger Roller plunger Mounting Adjustable roller lever Adjustable rod lever Angle limit switch actuator Avoid abrupt angles on limit switch actuator. Max. speed limit switch actuator (m/s) Caution 1. Do not operate it in an area in which fluids such as oil, coolant, or water splash on it or dust comes in contact with it. Because it does not have a waterproof or dustproof construction, fluids or dust could enter the valve, leading to malfunction. Therefore, take measures such as providing a protective cover to prevent direct exposure. Warning 1. Perform inspections on a regular basis as necessary, such as at the beginning of an operation, to make sure that the mechanical valve operates properly. Failure to observe this precaution could lead to unsafe operation, such as unintended operation or malfunction. Replace the button in the following manner to change color of the button. 1. Push button (Flush type) Installation Of the four colors, red, green, black, and yellow, select and align the protruding portion of the button with the recessed portion of the body and push in. Removal Remove the fastening ring and insert the tip of a small flat screwdriver into the groove of the button to pry it up. Groove Recessed portion Protrusion Environments Maintenance How to Change the Buttons Flat button Fastening ring (Bad) (Good) Above 45 (Bad) (Good) (Good) Over travel Max. travel Abrupt angle Below 45 Below 45 Sufficient travel Max. travel External stop prevent over travel 2. Push button (Mushroom and extended types) At the time of shipment, only 1 button of the color that you specified is attached to the body. Mounting Removal Mushroom type Align the protruding portion of the button with the recessed portion of the body and push in. (Use the mark on the button as a reference to align the protruding part.) Placing your finger under the collar of the button on the side of the mark, tilt it upward. Extended type Align the protruding portion of the button with the recessed portion of the body and push in. Remove the fastening ring and insert the tip of a small flat screwdriver into the groove of the button to pry it up. Cam and Dog Material Roller material Polyacetal Steel Plunger material Steel Steel, Resin Plunger surface finish 3. Never perform additional machining such as enlarging the body s. As doing so could lead to abnormal conditions such as air leakage. 4. Operate all manual valves such as the push pin types, the selector types, and the flip toggle types with your finger. If a hammer or other tools are used, or it is operated mechanically through the use of a cylinder or the like, damage could result. Mushroom button Protrusion Recessed portion Mark Groove Flat head button Protrusion 5-6-6
5 Mechanical Valves Series VM How to remove a mushroom button How to remove at panel mount Support it with your finger. Mark Use your thumb to pull the button down. Replacement parts 1. Use the part numbers listed below to order individual mushroom head or flat head buttons. Color Yellow Color Yellow Mushroom button R B G Y Push button (Flush) R B G Y Extended button R B G Y 2. To order single fastening ring, use the part number below. Fastening ring: To order a single push button for series VM1000 and a single cover use the part number below. Color Push button Cover for push button R B G (White only) VM VR VH VHS Removing the valve as a unit Mark Use your thumb to pry the button upwards
6 Micro Mechanical Valve Series VM1000 Miniature stucture requires little mounting space. Built-in hose nipple connection. Piping options: Side piping, Bottom piping Over Travel after actuation (mechanical operated types) Specifications Valve type Number of ports Piping Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Fitting Weight () N.C. poppet 2 or 3 Side or bottom ported Air/Inert gas 0 to 0.8 MPa 5 to 60 C (No freezing) 1 mm 2 Not required (Use turbine oil Class 1 lso VG32, if lubricated.) With hose nipple 6 g Option Total travel () 2.5 mm () A commercially available actuator for the V microswitch can be installed. However, be aware that there are different microswitches, such as the / or F.O.F. types. 2.5 mm is available for basic style only. Model Mechanical operation Manual operation Actuator One way roller lever Toggle lever Push button Piping Number Applicable tubing of ports T0425 TU0425/ET0403 Note Side ported VM1000-4N-00 VM1000-4NU-00 VM1100-4N-00 VM1100-4NU-00 Bottom ported Side ported Bottom ported Side ported Bottom ported Side ported Bottom ported VM1010-4N-00 VM1000-4N-01 VM1010-4N-01 VM1000-4N-02 VM1010-4N-02 VM1000-4N-08 VM1010-4N-08 VM1010-4NU-00 VM1000-4NU-01 VM1010-4NU-01 VM1000-4NU-02 VM1010-4NU-02 VM1000-4NU-08 VM1010-4NU-08 VM1110-4N-00 VM1100-4N-01 VM1110-4N-01 VM1100-4N-02 VM1110-4N-02 VM1100-4N-08 VM1110-4N-08 VM1110-4NU-00 VM1100-4NU-01 VM1110-4NU-01 VM1100-4NU-02 VM1110-4NU-02 VM1100-4NU-08 VM1110-4NU-08 Side ported Bottom ported Side ported Bottom ported Side ported Bottom ported VM1000-4N-32R VM1010-4N-32R VM1000-4N-32B VM1010-4N-32B VM1000-4N-32G VM1010-4N-32G VM1000-4NU-32R VM1010-4NU-32R VM1000-4NU-32B VM1010-4NU-32B VM1000-4NU-32G VM1010-4NU-32G VM1100-4N-32R VM1110-4N-32R VM1100-4N-32B VM1110-4N-32B VM1100-4N-32G VM1110-4N-32G VM1100-4NU-32R VM1110-4NU-32R VM1100-4NU-32B VM1110-4NU-32B VM1100-4NU-32G VM1110-4NU-32G Note) To replace the push button and push button cover alone, refer to page Other parts and actuator cannot be replaced
7 Micro Mechanical Valve Series VM1000 How to Order VM N 00 R Construction Number of ports 0 1 Side ported/non-actuated R. only 0 1 Piping 0 Side ported 1 Bottom ported Applicable tubing (Material/Size) 4N Nylon ø4/2.5 (T0425) Nylon ø4/3 (T0403) 4NU Soft Nylon ø4/2.5 (TS0425) Polyurethane ø4/2.5 (TU0425) Total travel/ () 4.8 mm 2.5 mm (Option) only. Actuator type One way roller lever 08 Toggle lever 32 Push button Side ported/actuated Force Color of push button R G B VM VR VH VHS Bottom ported/non-actuated R. only Bottom ported/actuated Force Component Parts No. q w e r t Description Body Valve Valve Retainer Spring Material PBT POM NBR POM Stainless steel Note No. y Description Spring Material Stainless steel u i Plunger Lever POM Stainless steel o Packing NBR!1 O-ring NBR Note = 2.5 mm only, w/threads 5-6-9
8 Series VM1000 Series VM1000/Side Ported VM1000-4N-00 VM1000-4NU-00 VM1100-4N-00 VM1100-4NU-00 [ ]: = 2.5 mm VM1000-4N-01 VM1000-4NU-01 VM1100-4N-01 VM1100-4NU-01 One way roller lever VM1000-4N-02 VM1000-4NU-02 VM1100-4N-02 VM1100-4NU-02 Toggle lever VM1000-4N-08 VM1000-4NU-08 VM1100-4N-08 VM1100-4NU-08 Applicable tube Applicable tube Applicable tube (Total Travel) 40 Mounting Mounting Mounting Lock nut thick 2 Panel / Side ported Applicable tubing T0425 TU0425, T0403, TS0425 Side VM1000-4N-00 VM1000-4NU-00 ported VM1100-4NU-00 F.O.F. VM1100-4N-006 N 2.5 mm [] 2.3 mm [0.5 mm] 4.8 mm [2.5 mm] / Applicable tubing T0425 TU0425, T0403, TS0425 Side VM1000-4N-01 VM1000-4NU-01 ported VM1100-4N-01 VM1100-4NU-01 6 N 2.5 mm 4.5 mm / / Applicable tubing T0425 TU0425, T0403, TS0425 VM1000-4N-02 VM1000-4NU-02 VM1100-4N-02 VM1100-4NU-02 6 N 2.5 mm 4.5 mm Push button VM1000-4N-32 VM1000-4NU-32 VM1100-4N-32 VM1100-4NU-32 Applicable tube Applicable tube Lock nut thick 2, across flats 14 Lock nut thick 2, across flats 14 Panel Side ported / Side ported Applicable tubing T0425 TU0425, T0403, TS0425 VM1000-4N-08 VM1000-4NU-08 VM1100-4N-08 VM1100-4NU-08 4 N 40 Applicable tubing T0425 TU0425, T0403, TS0425 VM1000-4N-32 VM1000-4NU-32 VM1100-4N-32 VM1100-4NU-32 6 N 2.5 mm 4.5 mm
9 Micro Mechanical Valve Series VM1000 Series VM1000/Bottom Ported VM1010-4N-00 VM1010-4NU-00 VM1110-4N-00 VM1110-4NU-00 [ ]: = 2.5 mm VM1010-4N-01 VM1010-4NU-01 VM1110-4N-01 VM1110-4NU-01 One way roller lever VM1010-4N-02 VM1010-4NU-02 VM1110-4N-02 VM1110-4NU-02 Toggle lever VM1010-4N-08 VM1010-4NU-08 VM1110-4N-08 VM1110-4NU-08 Applicable tube Applicable tube Applicable tube (Total Travel) 40 Mounting Mounting Mounting Lock nut thick 2 Panel / Applicable tubing T0425 VM1010-4N-02 VM1110-4N-026 N 2.5 mm 4.5 mm Bottom ported Applicable tubing T0425 TU0425, T0403, TS0425 Bottom VM1010-4N-00 VM1010-4NU-00 ported VM1110-4NU-00 F.O.F. VM1110-4N-006 N 2.5 mm 2.3 mm [0.5 mm] 4.8 mm [2.5 mm] / Applicable tubing T0425 TU0425, T0403, TS0425 Bottom VM1010-4N-01 VM1010-4NU-01 ported VM1110-4NU-01 F.O.F. VM1110-4N-016 N 2.5 mm 4.5 mm / / TU0425, T0403, TS0425 VM1010-4NU-02 VM1110-4NU-02 VM VR VH VHS Push button VM1010-4N-32 VM1010-4NU-32 VM1110-4N-32 VM1110-4NU-32 Applicable tube Applicable tube Lock nut thick 2, across flats 14 Lock nut thick 2, across flats 14 Panel Applicable tubing T0425 VM1010-4N-08 F.O.F. VM1110-4N-084 N 40 Bottom ported / Applicable tubing T0425 VM1010-4N-32 VM1110-4N-326 N 2.5 mm 4.5 mm Bottom ported TU0425, T0403, TS0425 VM1010-4NU-08 VM1110-4NU-08 TU0425, T0403, TS0425 VM1010-4NU-32 VM1110-4NU
10 2/3 Port Mechanical Valve Series VM100 Compact size. Piping options: Side piping, Bottom piping A variety of actuator types. Specifications Piping Side ported Bottom ported Fluid Air/Inert gas Operating pressure 100 kpa to 1.0 MPa Ambient and fluid temperature Effective area 5 to 60 C (No freezing) 2.5 mm 2 Lubrication Not required (Use turbine oil Class 1 ISO VG32, if lubricated.) Port size 1 8 M5 x 0.8 Weight () 95 g 110 g Model Mechanical operation Manual operation Side ported Bottom ported Actuator part no. Application VM VM VM122-M5-00 VM132-M5-00 VM VM VM123-M5-00 VM133-M5-00 VM VM VM123-M5-01 VM133-M5-01 Polyacetal roller VM S VM S VM123-M5-01S VM133-M5-01S Hard steel roller One way VM VM VM123-M5-02 VM133-M5-02 Polyacetal roller roller lever VM S VM S VM123-M5-02S VM133-M5-02S Hard steel roller Straight plunger VM VM VM122-M5-05 VM132-M5-05 VM-05B Roller VM VM VM122-M5-06 VM132-M5-06 VM-06B Polyacetal roller plunger VM S VM S VM122-M5-06S VM132-M5-06S VM-06BS Hard steel roller Cross roller VM VM VM122-M5-07 VM132-M5-07 VM-07B Polyacetal roller plunger VM S VM S VM122-M5-07S VM132-M5-07S VM-07BS Hard steel roller Toggle lever VM VM VM122-M5-08 VM132-M5-08 VM-08B VM R VM R VM122-M5-30R VM132-M5-30R VM-30AR Push button VM B VM B VM122-M5-30B VM132-M5-30B VM-30AB (Mushroom) VM G VM G VM122-M5-30G VM132-M5-30G VM-30AG VM Y VM Y VM122-M5-30Y VM132-M5-30Y VM-30AY Yellow VM R VM R VM122-M5-32R VM132-M5-32R VM-32AR Push button VM B VM B VM122-M5-32B VM132-M5-32B VM-32AB (Extended) VM G VM G VM122-M5-32G VM132-M5-32G VM-32AG VM Y VM Y VM122-M5-32Y VM132-M5-32Y VM-32AY Yellow Push button (Flush) VM VM VM122-M5-33 VM132-M5-33 VM-33A With a set of red, black, green, yellow Twist selector (2 position) Key selector (2 position) Twist selector (3 position) VM R VM B VM G VM Y VM R VM B VM G VM Y VM122-M5-34R VM122-M5-34B VM122-M5-34G VM122-M5-34Y VM132-M5-34R VM132-M5-34B VM132-M5-34G VM132-M5-34Y VM-34AR VM-34AB VM-34AG VM-34AY VM VM VM122-M5-36 VM132-M5-36 VM-36A VM R VM R VM133-M5-35R VM153-M5-35R VM B VM B VM133-M5-35B VM153-M5-35B VM G VM G VM133-M5-35G VM153-M5-35G VM Y VM Y VM133-M5-35Y VM153-M5-35Y () (5 port) () (5 port) Yellow Yellow Note 1) Actuator replacement is available for all types except for roller lever, one way roller lever, and 3 position selector. Note 2) For push button (mushroom), push button (extended), push button (flush) and a single unit of fastening ring, refer to pages to The other parts are not replaceable. Note 3) The handle of the selector (2 position and 3 position) cannot be removed or replaced alone
11 2/3 Port Mechanical Valve Series VM100 How to Order VM S 2 3 Construction Long Short Long Short Number of ports Port size 01 Rc 1 8 M5 M5 x 0.8 (Female thread) N01 NPT 1 8 F01 G 1 8 Piping direction and the length of push rod Side ported Bottom ported Actuator type One way roller lever 05 Straight plunger 06 Roller plunger 07 Cross roller plunger 08 Toggle lever 30 Push button (Mushroom) 32 Push button (Extended) 33 Push button (Flush) 34 Twist selector (2 position) 36 Key selector (2 position) 35 Twist selector (3 position) Suffix for actuator S R B G Y Hard steel roller Color of push button selector Yellow Suffix for indicator light Z With miniature indicator light (Bottom piping type only) Height of rod push Side ported Bottom ported Actuator Long Short Long Short x x One way roller lever 02 x x Straight plunger 05 x x Roller plunger 06 x x Cross roller plunger 07 x x Toggle lever 08 x x Push button (Mushroom) 30 x x Push button (Extended) 32 x x Push button (Flush) 33 x x Twist selector (2 position) 34 x x Key selector (2 position) 36 x x Twist selector (3 position) 35 x x Combination possible:, Combination impossible: x VM VR VH VHS Side ported only Bottom ported only Non-actuated Non-actuated Force Force Actuated Actuated Component Parts No. q w e r t Description Valve Plunger Valve sheet Valve Spring Material ZDC POM POM NBR Stainless steel Note Metallic plated No. y u i o Description Gasket Cover Sub-plate Hexagon socket head plug Material NBR Rolled steel ZDC Rolled steel Note Metallic plated
12 Series VM100 Series VM100/Side Ported VM VM VM VM Actuator ( only) Model VM VM VM VM L A N 1.5 mm 1.5 mm 3.0 mm VM VM VM S VM S Polyacetal or hard steel roller ( only) 10 N 3.2 mm 2.3 mm 5.5 mm One way roller lever VM VM VM S VM S Polyacetal or hard steel roller ( only) 10 N 3.2 mm 2.3 mm 5.5 mm Straight plunger VM VM Hexagon nut thick 5, across flats 17 Panel mounting ( only) 23 N 1.5 mm 3.5 mm Roller plunger VM VM VM S VM S Polyacetal or hard steel roller Hexagon nut thick 5, across flats 17 Panel mounting ( only) 23 N 1.5 mm 3.5 mm
13 2/3 Port Mechanical Valve Series VM100 Series VM100/Side Ported Cross roller plunger VM VM VM S VM S Polyacetal or hard steel roller Hexagon nut thick 5, across flats 17 Panel mounting Toggle lever VM VM ( only) Hexagon nut thick 5, across flats 17 Panel mounting 23 N 2 mm 1.5 mm 3.5 mm VM ( only) VR VH 10 N 60 VHS Push button (Mushroom) VM R/B/G/Y VM R/B/G/Y Panel mounting ( only) Push button (Extended) VM R/B/G/Y VM R/B/G/Y Panel mounting 21 N 4.9 mm 1.6 mm 6.5 mm Push button (Flush) VM VM ( only) Panel mounting 21 N 4.9 mm 1.6 mm 6.5 mm ( only) 21 N 4.9 mm 1.6 mm 6.5 mm
14 Series VM100 Series VM100/Side Ported Twist selector (2 position) VM R/B/G/Y VM R/B/G/Y Panel ( only) Key selector (2 position) VM VM Panel 15 N 90 ( only) Key can be removed at the on and off positions. Twist selector (3 position) VM R/B/G/Y VM R/B/G/Y Panel 15 N 90 5 port ( only) 15 N
15 2/3 Port Mechanical Valve Series VM100 Series VM100/Bottom Ported VM122-M5-00 VM132-M5-00 VM123-M5-00 VM133-M5-00 Actuator ( only) 2-M5 x 0.8 depth 4 VM123-M5-01 VM133-M5-01 VM123-M5-01S VM133-M5-01S Polyacetal or hard steel roller ( only) Model VM122-M5-00 VM132-M5-00 VM123-M5-00 VM133-M M5 x 0.8 depth 4 L A N 1.5 mm 1.5 mm 3.0 mm 10 N 3.2 mm 2.3 mm 5.5 mm VM VR VH VHS One way roller lever VM123-M5-02 VM133-M5-02 VM123-M5-02S VM133-M5-02S Polyacetal or hard steel roller ( only) Straight plunger VM122-M5-05 VM132-M M5 x 0.8 depth 4 Hexagon nut thick 5, across flats 17 ( only) Panel 10 N 3.2 mm 2.3 mm 5.5 mm Roller plunger VM122-M5-06 VM132-M5-06 VM122-M5-06S VM132-M5-06S Polyacetal or hard steel roller 2-M5 x 0.8 depth 4 Hexagon nut thick 5, across flats 17 Panel 23 N 1.5 mm 3.5 mm 2-M5 x 0.8 depth 4 ( only) 23 N 1.5 mm 3.5 mm
16 Series VM100 Series VM100/Bottom Ported Cross roller plunger VM122-M5-07 VM132-M5-07 VM122-M5-07S VM132-M5-07S Polyacetal or hard steel roller Hexagon nut thick 5, across flats 17 ( only) Panel mounting Toggle lever VM122-M5-08 VM132-M5-08 Hexagon nut thick 5, across flats 17 ( only) 2-M5 x 0.8 depth 4 Panel mounting 23 N 2 mm 1.5 mm 3.5 mm 2-M5 x 0.8 depth 4 10 N 60 Push button (Mushroom) VM122-M5-30R/B/G/Y VM132-M5-30R/B/G/Y Panel mounting 2-M5 x 0.8 depth 4 ( only) 21 N 4.9 mm 1.6 mm 6.5 mm Push button (Extended) VM122-M5-32R/B/G/Y VM132-M5-32R/B/G/Y Panel mounting 2-M5 x 0.8 depth 4 ( only) 21 N 4.9 mm 1.6 mm 6.5 mm Push button (Flush) VM122-M5-33 VM132-M5-33 Panel mounting ( only) 2-M5 x 0.8 depth 4 21 N 4.9 mm 1.6 mm 6.5 mm
17 2/3 Port Mechanical Valve Series VM100 Series VM100/Bottom Ported Twist selector (2 position) VM122-M5-34R/B/G/Y VM132-M5-34R/B/G/Y Panel ( only) 2-M5 x 0.8 depth 4 VM Key selector (2 position) VM122-M5-36 VM132-M5-36 Panel 15 N 90 VR VH VHS ( only) 2-M5 x 0.8 depth 4 Key can be removed at the on and off positions. 15 N 90 Twist selector (3 position) VM133-M5-35R/B/G/Y VM153-M5-35R/B/G/Y Panel 5 port (5 port only) 3-M5 x 0.8 Depth 4 20 N
18 2/3 Port Mechanical Valve Series VM200 Large flow capacity. A variety of actuator types. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Weight () Air/Inert gas 0 to 1.0 MPa 5 to 60 C (No freezing) 19 mm 2 Not required (Use turbine oil Class 1 ISO VG32, if lubricated.) g Model Mechanical operation Manual operation No. of ports Actuator VM VM VM VM VM S VM S One way VM VM roller lever VM S VM S Straight plunger VM VM Roller plunger VM VM VM S VM S Cross roller plunger VM VM VM S VM S Toggle lever VM VM VM R VM R Push button VM B VM B (Mushroom) VM G VM G VM Y VM Y VM R VM R Push button VM B VM B (Extended) VM G VM G VM Y VM Y Push button (Flush) VM VM Twist selector (2 position) Key selector (2 position) Twist selector (3 position) Foot pedal VM R VM B VM G VM Y VM VM R VM B VM G VM Y () VM VM R VM B VM G VM Y VM VM R VM B VM G VM Y (5 port) VM Actuator part no. VM-01A VM-01AS VM-02A VM-02AS VM-05A VM-06A VM-06AS VM-07A VM-07AS VM-08A VM-30AR VM-30AB VM-30AG VM-30AY VM-32AR VM-32AB VM-32AG VM-32AY VM-33A VM-34AR VM-34AB VM-34AG VM-34AY VM-36A Application Polyacetal roller Hard steel roller Polyacetal roller Hard steel roller Polyacetal roller Hard steel roller Polyacetal roller Hard steel roller Yellow Yellow With a set of red, black, green, yellow Yellow Yellow Note 1) Actuator replacement is available for all types except twist selector (3 position) and foot pedal. Note 2) For push button (mushroom), push button (extended), push button (flush) and a single unit of fastening ring, refer to pages to The other parts are not replaceable. Note 3) The handle of the selector (2 position and 3 position) cannot be removed or replaced alone
19 2/3 Port Mechanical Valve Series VM200 How to Order VM S Construction N02 F02 Number of ports Non-actuated Port size Rc 1 4 NPT 1 4 G 1 4 EXH port only Actuator type One way roller lever 05 Straight plunger 06 Roller plunger 07 Cross roller plunger 08 Toggle lever 30 Push button (Mushroom) 32 Push button (Extended) 33 Push button (Flush) 34 Twist selector (2 position) 36 Key selector (2 position) 35 Twist selector (3 position) 40 Foot pedal S R B G Y Actuated Force Suffix for actuator Hard steel roller Yellow Color of push button selector VM VR VH VHS Component Parts No. q w e Description Valve Plunger Plunger retainer Material ADC POM PBT Note Metallic plated No. r t y Description Cover Valve Spring Material POM Brass, NBR Steel Note
20 Series VM200 Series VM200 VM VM M3x0.5 Actuator EXH port ( only) VM VM VM S VM S ø17 polyacetal or hard steel roller EXH port ( only) 52 N 3.0 mm 5.0 mm One way roller lever VM VM VM S VM S ø17 polyacetal or hard steel roller 24 N 6.5 mm 4.5 mm 11.0 mm EXH port ( only) Straight plunger VM VM Hexagon nut thick 6, across flats 27 EXH port ( only) Panel mount 22 N 7.0 mm 5.0 mm N 3.5 mm 5.5 mm
21 2/3 Port Mechanical Valve Series VM200 Series VM200 Roller plunger VM VM VM S VM S ø17 polyacetal or hard steel roller Hexagon nut thick 6, across flats 27 EXH port ( only) Panel mounting Cross roller plunger VM VM VM S VM S ø17 polyacetal or hard steel roller Hexagon nut thick 6, across flats 27 EXH port ( only) Panel mounting 56 N 3.5 mm 5.5 mm VM VR VH VHS Toggle lever VM VM N 3.5 mm 5.5 mm Hexagon nut thick 6, across flats 27 EXH port Panel mounting ( only) N 60 Push button (Mushroom) VM R/B/G/Y VM R/B/G/Y Panel mounting EXH port ( only) N 4.9 mm 1.6 mm 6.5 mm
22 Series VM200 Series VM200 Push button (Extended) VM R/B/G/Y VM R/B/G/Y Panel EXH port ( only) Push button (Flush) VM VM N 4.9 mm 1.6 mm 6.5 mm Panel EXH port ( only) Twist selector (2 position) VM R/B/G/Y VM R/B/G/Y N 4.9 mm 1.6 mm 6.5 mm Panel EXH port ( only) N
23 2/3 Port Mechanical Valve Series VM200 Series VM200 Key selector (2 position) VM VM Panel EXH port ( only) VM Key can be removed at the on and off positions. Twist selector (3 position) VM R/B/G/Y VM R/B/G/Y Panel 32 N 90 VR VH VHS EXH port (5 port only) EXH port (5 port only) 5 port 40 N 45 Foot pedal VM VM (Mounting ) 5 port 65 N
24 3 Port Mechanical Valve Series VM400 Either N.C. or N.O. is available. Piping possible to any port. Proper countermeasures can be taken for applications in which the noise of the exhaust could cause problems to the surroundings. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Weight () Air/Inert gas 100 kpa to 1.0 MPa 5 to 60 C (No freezing) 7 mm 2 Not required (Use turbine oil Class 1 ISO VG32, if lubricated) g Model Manual operation Mechanical operation Actuator One way roller lever Straight plunger Roller plunger Cross roller plunger Toggle lever Push button (Mushroom) Push button (Extended) Push button (Flush) Model VM VM VM S VM VM S VM VM VM S VM VM S VM VM R VM B VM G VM Y VM R VM B VM G VM Y VM Actuator part no. VM-01A VM-01AS VM-02A VM-02AS VM-05A VM-06A VM-06AS VM-07A VM-07AS VM-08A VM-30AR VM-30AB VM-30AG VM-30AY VM-32AR VM-32AB VM-32AG VM-32AY VM-33A Application Polyacetal roller Hard steel roller Polyacetal roller Hard steel roller Polyacetal roller Hard steel roller Polyacetal roller Hard steel roller Yellow Yellow With a set of red, black, green, yellow VM R VM-34AR Twist selector (2 position) VM B VM-34AB VM G VM-34AG VM Y VM-34AY Yellow Key selector (2 position) VM VM-36A Note 1) Actuator replacement is available for all types. Note 2) For push button (mushroom), push button (extended), push button (flush) and a single unit of fastening ring, refer to pages to The other parts are not replaceable. Note 3) The handle of the selector (2 position) cannot be removed or replaced alone
25 3 Port Mechanical Valve Series VM400 How to Order VM S Port size 01 Rc 1 8 N01 NPT 1 8 F01 G 1 8 Number of ports 3 Actuator type One way roller lever 05 Straight plunger 06 Roller plunger 07 Cross roller plunger 08 Toggle lever 30 Push button (Mushroom) 32 Push button (Extended) 33 Push button (Flush) 34 Twist selector (2 position) 36 Key selector (2 position) Suffix for actuator S R B G Y Hard steel roller Color of push button selector Yellow VM Construction Non-actuated Actuated VR VH Force VHS Component Parts No. q w e r Description Body Plunger Upper lid Spool valve Material ADC POM Brass Aluminum alloy Note Metallic plated zinc chromated Rubber lined No. t y u i Description Over travel spring Retainer Spring Spring Material Stainless steel Brass Stainless steel Stainless steel Note
26 Series VM400 Series VM400 VM Actuator VM VM S ø17 polyacetal or hard steel roller F.O.F. 26 N 1.5 mm 3.5 mm F.O.F. 12 N 4.0 mm 4.5 mm 8.5 mm One way roller lever VM VM S ø17 polyacetal or hard steel roller Straight plunger VM F.O.F. 11 N 4.0 mm 5.0 mm 9.0 mm Panel Hexagon nut thick 6, across flats F.O.F. 30 N 3.5 mm 5.5 mm
27 3 Port Mechanical Valve Series VM400 Series VM400 Roller plunger VM VM S ø17 polyacetal or hard steel roller Panel Hexagon nut thick 6, across flats F.O.F. 30 N 3.5 mm 5.5 mm Cross roller plunger VM VM S ø17 Polyacetal or hard steel roller Hexagon nut thick 6, across flats 27 Panel VM VR VH VHS Toggle lever VM (Total Travel) Hexagon nut thick 6, across flats 27 F.O.F. 30 N 3.5 mm 5.5 mm Panel Push button (Mushroom) VM R/B/G/Y F.O.F. 7 N 60 Panel F.O.F. 26 N 4.6 mm 1.6 mm 6.5 mm
28 Series VM400 Series VM400 Push button (Extended) VM R/B/G/Y Panel Push button (Flush) VM F.O.F. 26 N 5.4 mm 1.6 mm 6.5 mm Panel Twist selector (2 position) VM R/B/G/Y F.O.F. 26 N 4.9 mm 1.6 mm 6.5 mm Panel F.O.F. 20 N
29 3 Port Mechanical Valve Series VM400 Series VM400 Key selector (2 position) VM Panel F.O.F. 20 N Key can be removed at the on and off positions. 90 VM VR VH VHS
30 3 Port Mechanical Valve: Heavy Duty Type Series VM800 Sturdy construction. Either N.C. or N.O. is available. Piping possible to any port. Proper countermeasures can be taken for applications in which the noise of the exhaust could cause problems to the surroundings. Many actuator positions and orientation options. Specifications Fluid Operating pressure Ambient and fluid temperature Effective area Lubrication Port size Weight () Model Actuator Adjustable roller lever Adjustable rod lever Actuator replacement is available. Air/Inert gas 100 kpa to 1.0 MPa 5 to 60 C (No freezing) 6 mm 2 Not required (Use turbine oil Class 1 ISO VG32, if lubricated.) g Model Actuator part no. VM VM VM-01F VM VM VM-13F VM-14F VM How to Order 01 Port size 01 Rc 1 8 N01 NPT 1 8 F01 G 1 8 Number of ports 3 Actuator type Adjustable roller lever 14 Adjustable rod lever Application Movement is changeable. Actuated Actuated Free travel Actuated Actuated Free travel Roller can be mounted to inside of lever. Stepped plunger Loosen the hexagon socket head cap screw to reverse lever. Loosen the hexagon socket head cap screw to reverse lever. Standard movements Lever location can be changed. Head direction can be changed. Lever length adjustment. Loosen the hexagon socket head cap screw to adjust through 360. Loosen the hexagon socket head cap screw to adjust the lever. Loosen the hexagon socket head cap screw to adjust rod length. It can be operated by bending the rod. In this case, make sure that the minimum bending radius of the rod is 10R or more
31 3 Port Mechanical Valve: Heavy Duty Type Series VM800 Construction Non-actuated Actuated Force VM VR VH Component Parts No. q w e Description Body Plunger Spool valve Material ADC POM Aluminum alloy, NBR Note Metallic plated Rubber lined No. r t y Description Over travel spring Retainer Spring Material Stainless steel Brass Steel Note Zinc chromated VHS Series VM800 VM Actuator (Pre-Travel) 1 (Over Travel) 2 (Total Travel) Thread depth 15 F.O.F. 23 N 1.0 mm 3.0 mm
32 Series VM800 Series VM800 VM Stainless sintered roller Hexagon socket head cap screw 4-M6 x 1 depth 15 Adjustable roller lever VM nylon roller F.O.F. 20 N Adjustment length 26 to 89 Hexagon socket head cap screw Adjustable rod lever VM ø3.2 stainless rod Depth 15 At lever length 38.1 mm 20 N MAX Hexagon socket head set screw Hexagon socket head cap screw Depth At lever length mm 2.3 N
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
More informationSpecifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
More informationInrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationSocket case Socket. Easy insertion of tube by the floating mechanism to adjust to the case hole. Clamp bolt. Possible to clamp with one bolt at once.
Multi-connector Series DM RoHS The use of the multiconnector enables panel mount connections with other apparatus and can provide the reliability of one-touch installation and removal of multi-tubes (nylon,
More informationSingle sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationHYDRAULIC LIFT TABLE CART 2200-LB.
HYDRAULIC LIFT TABLE CART 2200-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationDIAMOND Retractable Rodding Robot Model SPRAYROD-R
2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic
More informationWear Resistant Tubing
Wear Resistant Tubing 1/ brasion: pprox. (Compared with SMC polyurethane tubing TU series) 3 6-color variations Description Wear resistant tubing TUZ series Polyurethane tubing TU series Green RoHS Maximum
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationPrecision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100.
Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationCompact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
More information5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationChar-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
More informationSECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
More information0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3
Port Solenoid Valve 00/00/00 Metal Seal Rubber Seal 0. 0.9 (Standard) (High pressure type, High speed response type) Power consumption: 0. W/0.9 W Compact, High Flow Body ported Base mounted 00 00 00 00
More information3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
More informationService Manual Rol-Lift
R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing
More informationElectro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
More informationINSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
More informationPA5. Series. Quick-Connect Cables with Connectors. Simplifies sensor wiring. Wide variety of connectors attached to cables.
Quick-Connect Cables with Connectors PA Simplifies sensor wiring. Wide variety of connectors attached to cables. Series No wiring or staking work needed Shorter replacement time in unlikely event of sensor
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More informationHYDRAULIC TABLE CART 500-LB.
HYDRAULIC TABLE CART 500-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationCylinder head, removing and replacing
15-1 Cylinder head, removing and replacing WARNING! Do not re-use any fasteners that are worn or deformed in normal use. Some fasteners are designed to be used only once, and are unreliable and may fail
More informationUniversal type. Elbow type AS13 1FG-M5 AS23 1FG-01 AS23 1FG-02 AS33 1FG-02 AS33 1FG-03 AS43 1FG-04. Specifications
Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type Series -FG RoHS Stainless specifications for use in corrosive environments. Stainless steel used for metal parts.
More informationRecognizing and understanding schematic symbols will enable you to comprehend a circuit s function.
Schematic symbols are used to identify and graphically depict the function of fluid power components. Recognizing and understanding schematic symbols will enable you to comprehend a circuit s function.
More information-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5
More informationOverview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer
Overview READ ENTIRE INSTRUCTIONS BEFORE STARTING INSTALLATION PARTS LIST A. Flush valve B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationCHROME FRONT BRAKE MASTER CYLINDER KIT
-J075 REV. 009-0-0 CHROME FRONT BRAKE MASTER CYLINDER KIT GENERAL Kit Number 5-99D, 5-99D Models These Chrome Master Cylinder Kits are designed to replace the original equipment front brake master cylinder
More informationMANUAL TRANSMISSION CONTENTS ...
22D-0-1 MANUAL TRANSMISSION CONTENTS GENERAL INFORMATION... 22D-0-3 1. SPECIFICATIONS... 22D-1-1 TRANSMISSION MODEL TABLE GENERAL SPECIFICATIONS SERVICE SPECIFICATIONS TORQUE SPECIFICATIONS............
More informationValve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
More informationD2SW-P. Sealed Subminiature Basic Switch. Ordering Information
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
More informationProcess Valve. 2 Port Valve For Compressed Air and Air-hydro Circuit Control
Process Valve Series VN Port Valve For Compressed ir and ir-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Valve [Option] Cylinder actuation by external
More informationTable of Contents. www.hunterfan.com. What to Expect with. Preparation. Tools Needed. Wiring. Hanging the Fan. Blades. Motor Housing.
www.hunterfan.com Table of Contents What to Expect with Your Installation 30 inches Hanging the Fan Wiring 8 Maintenance, Operation & Cleaning Light Kit 13??? 14 1 9 Troubleshooting 11 5 Blades Motor Housing
More informationControl blocks for two-hand start ZSB
Key features Function This pneumatic control block for twohand start ZSB is used where a manually started operation, such as the triggering of compressed air cylinders, would otherwise involve danger for
More informationhttp://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html
http://waterheatertimer.org/troubleshoot-rheem-tankless-water-heater.html TECHNICAL SERVICE DEPARTMENT Removal, Cleaning, & Reinstallation of the Burner Assembly For models 74 & GT199 Required tools -
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationProcenter Delivery System* Troubleshooting Charts
1 2 3 4 Procenter Delivery System* Troubleshooting Charts * includes International (Whip) Units Component Page Procenter / Int l. (Whip) Delivery Units*... 2 Assistant s Units...6 Midmark Cuspidor...7
More informationWater Separator. Main Line Filter. Mist Separator. Micro Mist Separator 150C 250C 350C 450C AMG 550C 2C 4C 8C 11C AFF 22C 37B 75B 150C 250C 350C 450C
Water droplet removal Water Separator Water droplet separation rate: % Model Flow capacity l/min (ANR) Max. flow capacity at 0.7 MPa inlet pressure 300 750 1,500 AMG 2,0 AMG to AMG/ Large dust particle
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationA&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS
A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS 1. Check your gauges before you take them out of the packaging to make sure they are at 0 (zero) psi for both boost and fuel pressure.
More informationInstallation Instructions 4508 4508S
SYMPHONY Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. Speed Connect
More informationStandard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationManual for GlobePharma Mini-Press II Rotary Tablet Press
1 of 13 Preparing the Rotary Press 1. Make sure the rotary press is unplugged. 2. Open the bottom cabinet of the rotary press and take out the grey tool kit, and the beige box of punches and dies. 3. Take
More informationball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
More informationSTEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER
14 14 STEERING HANDLEBAR/FRONT WHEEL/ SCHEMATIC DRAWING ------------------------------------------------- 14-1 SERVICE INFORMATION------------------------------------------------ 14-2 TROUBLESHOOTING-----------------------------------------------------
More information2 position single. (Standard) 100V AC 50/60Hz 200V AC 50/60Hz 24V DC. 2 position double
4/ Port Solenoid Valve Rubber Seal VZ1000/000/000 Solenoid Valve Variations Port Size Effective area (mm 2 ) Position solenoid Voltage Electrical entry Option/ Indicator light and surge voltage suppressor
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationALBINS SEQUENTIAL SHIFTER
ALBINS SEQUENTIAL SHIFTER Updated 12/11/11 8-AGB5-INST GENERAL NOTES The Albins Sequential Shifter is specifically designed for AGB transaxles. It features an integral reverse lockout lever and has a position
More informationREPAIR AND MAINTENANCE MANUAL
REPAIR AND MAINTENANCE MANUAL Professional Pest Control Application Equipment Prime Line Sprayers B&G Equipment Company 135 Region South Drive, Jackson, GA 30233 800.544.8811 Phone 678.688.5601 Fax 678.688.5633
More informationINSTRUCTION. Industrial Sewing Machines. No. 010012. First published : June 1997 Second edition : March 2001
INSTRUCTION Industrial Sewing Machines First published : June 1997 Second edition : March 2001 No. 010012 INTRODUCTION Thank you for your purchasing Kansai Special's DLR Series. Read and study this instruction
More informationOriginal Assembly Guide
TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)
46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel
More informationTITAN 13 x 2 ½ BRAKES
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
More information13. REAR WHEEL/BRAKE/SUSPENSION
13. REAR WHEEL/BRAKE/SUSPENSION 13 3.5~4.5kg-m 8.0~10.0kg-m 0.8~1.2kg-m 3.0~4.0kg-m 2.4~3.0kg-m 3.5~4.5kg-m 6.0~8.0kg-m 13-0 13. REAR WHEEL/BRAKE/SUSPENSION 13 REAR WHEEL/BRAKE/SUSPENSION SERVICE INFORMATION...
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More information5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Model position position Type of actuation
More informationINGROUND, ROPED, AND HOLELESS JACK SEAL REPLACEMENT
D. L. Martin Company INGROUND, ROPED, AND HOLELESS JACK SEAL REPLACEMENT TYPICAL HYDRAULIC JACK HEAD ASSEMBLY 1 TOOLS REQUIRED: 1) Container to hold hydraulic fluid. 2) Clean rags and protective covers
More information2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
More informationDive Rite 200 & 300 Bar Isolator Manifold Service Manual
Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Principal Photography and Text by Pete Nawrocky Copyright 2003 Lamartek Inc. D/B/A Dive Rite 0 Warning This manual is only to be used as a guide
More informationThis kit may void factory warranty please check with manufacturer.
Mfg Company TM Thank you for purchasing a Sinister Manufacturing Company EGR delete kit. Precision manufactured using aircraft quality 304 stainless steel and billet aluminum; this EGR kit is designed
More informationSET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY
SET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY 82-13-1 O-Ring (Rear) The Lead Screw Assembly is shipped separately. Note: Install Electrical and Pneumatic Circuitry. Be Sure electrical and pneumatic
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationM A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
More informationBODY-12, Door Handle - Removal, Installation, and Adjustment
Introduction BODY-12, Door Handle - Removal, Installation, and Adjustment There are many different procedures floating around describing how to replace the door handles on a 944 and every one of them will
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More informationPOSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT
POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationMODEL T200-F18 MODEL T125-F18 Finish Nailers
P MODEL T200-F18 MODEL T125-F18 Finish Nailers IMPORTANT! DO NOT DESTROY It is the customer s responsibility to have all operators and service personnel read and understand this manual. OPERATING MANUAL
More informationFluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
More informationDOOR STOP SERIES. www.shengjiu.com LS531 LS532 ERP LS531F3A100001. Main material: Black PC ERP LS532N00000001. Accessories.
Accessories LS531 DOOR STOP SERIES Electronic Handle Cylinder Main material and finish: Bright chrome plated steel Panel LS5 Main material: Black PC LS531F3A100001 LS5N00000001 TX80 P245 TX0-3 P247 TX100-A
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationArecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual
0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security
More information1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
More informationSTEERING SYSTEM - POWER
STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and
More informationPneumatic. PXC Limit Switches. Authorised Distributor TTS Valve Technologies Sdn Bhd
Pneumatic PXC Limit Switches Limit Switches Series PXC High durability Very good repeat accuracy Design for process duty cycle Push-in or threaded connection Versatile and easily maintained Wide range
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationUSE AND MAINTENANCE MANUAL
FORKS POSITIONER Mod. FR-FP-FFP ORIGINAL INSTRUCTIONS INTRODUCTION This manual includes instructions for assembly, maintenance (regular and extraordinary), and for possible faults with remedies. The instructions
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationPowers Controls TH 192 S Single Temperature Room Thermostat
Technical Instructions Document No. 155-065P25 TH 192-1 Powers Controls TH 192 S Single Temperature Room Thermostat 50 60 70 80 TH0355R1 70 80 POWERS Description The TH 192 S thermostats are proportional
More informationRound Housing with Side Ports
Power Steering Steering Control Unit (SCU) Parts and Repair Information 5 Series Steering Control Units 001 Square Housing with Side Ports Round Housing with Side Ports T E L RP Round Housing with End
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More information2010-2011. Shortform Catalogue. Solutions for appliance & electronic applications. rocker switches. lever. switches. push. switches.
2010-2011 Solutions for appliance & electronic applications Shortform Catalogue rocker lever push vandal resistant slide door snap-action & safety rotary IEC sockets fuseholders indicators A trading name
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationDenotes New Winner s Circle Product Line. Catalog HY15-3502/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI HIGH FLOW VALVE FAMILY
Catalog HY-5/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI HIGH FLOW VALVE FAMILY See individual catalog pages for exact specifications. WAY SPOOL TYPE GS *... X / C9-.. Position,
More informationtype V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
More informationWHAT YOU DON T KNOW ABOUT ACCUMULATORS CAN KILL YOU!
WHAT YOU DON T KNOW ABOUT ACCUMULATORS CAN KILL YOU! Atlanta (Monroe) GA 770-267-3787 gpm@gpmhydraulic.com www.gpmhydraulic.com What You Don t Know About Hydraulic Accumulators Can Kill You TABLE OF CONTENTS
More informationREPAIR INSTRUCTIONS UNDER BODY CYLINDER (UM, UL)
Table of contents 1. Introduction... 3 1.1. Scope of use... 3 1.2. General remarks... 3 1.3. Contact Hyva... 3 1.4. Precautions... 4 1.5. Spare parts... 4 1.5.1. Prior to use... 4 1.6. Recycling and Reuse
More information