Italian Technlgy Award Milan, 22-26 March 2010
Agenda 22 nd March 2010 Mdule: Technlgy Driven Innvatin Mrning Prfessrs: Gaetan Cascini, Marc Gigli, Albert Zass Afertnn Visit t the Wind Tunnel and Labratries 23 rd March 2010 Mdule: ICT trends fr the develpment f innvative prducts and services Mrning Prfessr: Pier Fraternali Afternn Tur f the MIP Bvisa Campus and Sightseeing f Milan City 24 th March 2010 Mdule: The Silk Experience Mrning: Visit t Ratti Cmpany Visit t Muse della Seta (Silk Museum) Lunch in Cm Afternn: Visit t Fndazine Ratti Visit t Cm Campus 25 th March 2010 Mdule: Design Driven Innvatin Mrning-Afternn Prfessr: Matte Ingaram Evening: Final Dinner and Attendance Ceremny 26 th March 2010 Mdule: Strategic Management f Technlgical Innvatin Mrning-Afternn Prfessr: Federic Frattini
1.1.1 Mdule: Technlgy Driven Innvatin 22 nd March 2010, MIP classrm Cntents (a) by Gaetan Cascini: Innvatin in the prduct develpment cycle (aims and scpes) Methds and Tls fr Systematic Innvatin Prblem Slving and Inventive Design Technlgy Frecasting Engineering Knwledge and Intellectual Prperty Management Methds and Emerging Technlgies fr Virtual Prttyping Human-Cmputer Interactin (Haptic interactin, Multimdal Interactin) Virtual Testing Nn-rigid Bdy Mdelling and Simulatin Cntents (b) by Marc Gigli: Advanced methds fr structural design f helicpter cmpnents: Helicpter cmpnents Damage tlerance apprach Acceptability f flaws and defects Vulnerability (ballistic impact) Cntents (c) by Albert Zass: Innvatin in the Field f Wind-Structure Interactin Analysis Wind Engineering: state f the art in base research and technical applicatins The Wind-Structure Interactin prblem: a typical crss-disciplinary subject invlving Structural Dynamics, Fluid Dynamics, Meterlgical, expertises The Bundary Layer Wind Tunnel at Plitecnic di Milan: a wrldwide recgnized innvative and high perfrmances facility Examples f innvative design techniques relying n the crss-disciplinary numerical-experimental apprach t the Wind Structure Interactin prblem: Lng Span Suspensin Bridges High Rise Buildings Cable Structures Wind Energy issues: very large and flexible high-pwer Wind Turbines Visit t the Wind Tunnel and n-site examples f recent prjects thrugh experimental instrumented scale mdels f different structures Gals: 1.1.2 Mdule: ICT trends fr the develpment f innvative prducts and services 23 rd March 2010, MIP classrm t understand the current trends in ICT that mst affect the develpment in the prduct and service industry t develp a practical knwledge f the mst relevant ICT tls and technlgies that can be put t wrk in imprving the prduct-service design prcess, the marketing activities and the relatinships with the custmers
Cntents by Pier Fraternali: Intrductin Backgrund: key directins f ICT develpment in the manufacturing and service industries ICT & creativity: cntent gathering, analysis and explitatin in the creative prcess supprt f creativity thrugh multimedia infrmatin retrieval supprt f creativity thrugh scial and recmmendatin tls ICT & interactin: pervasive systems in the furniture design, hme and dmtics, and entertainment sectrs The Web 2.0 as a marketing and custmer relatinship tl Overview f the future trends Gals: 1.1.3 Mdule: Design Driven Innvatin 25 th March 2010, POLIDESIGN classrm t understand hw Design can be cnsidered and trusted as reliable activity in New Prduct Develpment prcesses. Creativity, Prductin prcesses and Technlgy can be integrated in a mdel able t imprve cmpany s cmpetitivity. t develp a mdel t reach cmpetitin advantages thrugh Design prcesses basing n references f Made in Italy Design best practices. Cntents by Matte Ingaram: Intrductin t Design in NPD prcesses Design fr cmpetitivity thrugh innvatin Design practice, the Italian mdel. The Design Schl at Plitecnic di Milan. One f the biggest Design Schl in the wrld is a research and knwledge center related t Italian and Internatinal cmpanies fr the cntinuus refining f Design Driven Innvatin prcesses. Wrkshps and research institutes will be shwn t participants: Mdel san Prttipes Decratin Lab LabPht MvieDesign Lab Llight and Clrs Lab Fashin Lab Materials an Prduct Archives
1.1.4 Mdule: Strategic Management f Technlgical Innvatin 26 th March 2010, MIP classrm Gals: The gal f the mdule n Strategic Management f Technlgical Innvatin is t develp candidates capability t identify, understand and address the main prblems that an innvative firm is cnfrnted with when it cmes t plan and implement an effective technlgy and innvatin strategy. Cntents by Federic Frattini: The impact that radical innvatins and technlgical discntinuities have n the perfrmance and survival f incumbent firms The strategic and rganizatinal appraches that can be used t successfully master the identificatin, develpment and cmmercializatin f radical innvatins Case studies: Plarid: Entering the digital imaging The emergence f the Open Innvatin paradigm and its implicatins n the technlgical innvatin prcess Case study: Fiat: Open Innvatin in a dwnturn (1993-2003)
****** Gaetan Cascini: Gaetan Cascini tk a Master degree with hnrs in Mechanical Engineering and a PhD in Machine Design at the Università di Firenze. He is certified 4th level TRIZ specialist by MA TRIZ (certificate N.80). He has been a assistant prfessr at the University f Flrence frm 1999 t 2008. He is currently: - Assciate Prfessr at Plitecnic di Milan, Faculty f Industrial Engineering - Chair f the Cmputer-Aided Innvatin wrkgrup and Cmmunicatin Officer f the TC-5 Cmmittee (Cmputer Applicatins in Technlgy) f IFIP (Internatinal Federatin fr Infrmatin Prcessing) - Bard member f ETRIA (Eurpean TRIZ Assciatin) - Member f the Design Creativity Special Interest Grup f the Design Sciety - Member f the Editrial Bard f the TRIZ Jurnal He has been: - President f Apeirn (Italian TRIZ Assciatin) - President f ETRIA (Eurpean TRIZ Assciatin) - Member f the MATRIZ Presidium RESEARCH TOPICS Methds and tls fr inventive design: - scientific frmalizatin and evlutin f methds fr inventive prblem slving - mdelling and analysis f the prduct cycle and Business Prcess Reengineering thrugh prcess innvatin - Knwledge Management and text mining algrithms fr patent analysis Cmputer-Aided systems: - Cmputer-Aided inventive prblem slving - develpment f Knwledge-Based CAD tls - nvel techniques fr tplgical ptimizatin Authr f mre than 80 papers presented at internatinal cnferences and published in authritative Jurnals and 8 patents. EDUCATIONAL ACTIVITY (2009/10) Plitecnic di Milan: 1. Methds fr Technical Representatin (Mech. Eng., 7 ECTS) 2. Design Labratry n Cmputer-Aided Engineering (Mech. Eng., 7 ECTS) 3. Prduct Virtual Mdeling (Ind. Des., 5 ECTS) 4. Mdeling and Simulatin Methds fr Prduct Develping Prcesses (MS Mech. Eng., 5 ECTS) Università di Firenze: 5. Methds and Tls fr Innvatin (MS Mech. Eng., 6 ECTS)
Marc Gigli He was brn in Milan (Italy) n Nvember 1st, 1961. Degree in Mechanical Engineering (September 1988, mark 100/100 cum laude). Researcher at the Plitecnic di Milan (1990). Assciate Prfessr (March 2002) f Machine Design. Teacher f the curses Machine Design, Design f Mechanical Cmpnents. Member f AIAS (Italian Assciatin fr the Analysis f Stress) and IGF (Italian Grup f Fracture). President f the Technical-Scientific Cmmittee f ITALCERT (Ntified bdy fr Eurpean Directive applicatin) n Pressure Equipment Design. The scientific activity has been fcused n the mechanical behaviur f materials and n design and structural integrity evaluatin f cmpnents and mechanical systems. Tpics: Mdelling and experimental assessment f the mechanical strength f rpes. Lw cycle fatigue: assessment methds in mechanical ntched elements with multiaxial state f stress and strain. Fatigue design f cmpnents with defects. Evaluatin f structural behaviur f helicpter cmpnents. Ballistic damage and residual strength assessment (FOD). Over 70 publicatins, mainly n internatinal jurnals and/r sympsia. Albert Zass: Brn in Brescia 10 June 1960. Graduatin 100/100 first class hnurs in Mech. Eng., at Plitecnic di Milan, 31-1-1985. PhD in Applied Mechanics, at Plitecnic di Milan, 28-9-1989. Researcher Applied Mechanics, 16-5-1990, Assciated Prfessr 26-10-1998, Full Prfessr 1-09-2009, Plitecnic di Milan. Chair n the fllwing Curses: Applied Mechanics (Mechanical Engineering 2 Year). Vibratins f Mechanical Systems (Mechanical Engineering 3 Year). Dynamics f Mechanical Systems (Mechanical Engineering 4 Year). Member f the Teaching Bard f the PhD Schl in Applied Mechanics. Respnsible in the Academic Year 2003-04 f the rganizatin f the Master in Wind Engineering and chair f the Curse Structures Aerelasticity. SCIENTIFIC CURRICULUM Research activities in the field f Dynamics f Structures due t Fluid-Dynamics Interactin. The scientific activity resulted in mre than 100 publicatins at Natinal and Internatinal level. Respnsible fr the cnceptin, prject and realizatin f the Bundary Layer Wind Tunnel at Campus Bvisa, Plitecnic di Milan, nw extensively used bth fr applied research cntract as well as fr base research prjects, being nwadays the mst significant facility fr Wind Engineering applicatins in Eurpe and ne f the mst prestigius wrldwide. Prf. A. Zass is at present the reference persn fr the Wind Engineering activities f Civil and Envirnmental Aerdynamics n behalf f CIRIVE, (Research Centre n Wind Engineering), the Scientific and Administrative Management Bard f
Plitecnic di Milan-Campus Bvisa Wind Tunnel. The fundamental research tpics, characterized by a strng experimental cnntatin and relying n wide experience n full scale structures testing as well as scale mdel Wind Tunnel testing, are summarized in the fllwing pints: 1. Fluid-Structure interactin f lng-span suspensin bridges: (Prf. A. Zass member f the research team respnsible fr the aerdynamic design f the suspensin bridge fr Messina Straight Crssing). 2. Mdal and aerelastic parameters identificatin in case f slender structures under wind actin: full scale and scale mdel applicatins (Lng-span bridges, high rise twers, ftbridges and tensined structures). 3. Unsteady aerdynamics effects n the dynamics and handling f the high perfrmance vehicle. 4. Wind Tunnel fr bundary layer lw turbulence applicatins: frm the cnceptin and design n scale mdel t the full scale realizatin and tuning. 5. Bluff Bdy fluid-dynamics, with specific reference t vrtex shedding mechanism f circular sectin and rectangular sectin cylinders. 6. High rise buildings fluid-structure interactin. Experimental (Wind Tunnel scale mdel testing) and numerical evaluatin f the wind lads n high rise buildings. 7. Wind Energy. Wind Tunnel testing activities n different Wind Turbines typlgies. CONTRIBUTION TO ASSOCIATIONS CONFERENCES - REVIEWS Member f the Bard f Directrs f the Italian Assciatin fr Wind Engineering and Internatinal Delegate f the assciatin. Member f the Organizing Cmmittee f the 7th Natinal Cnference n Wind Engineering IN-VENTO 2002 (Milan, September, 2002). Member f the Organizing Cmmittee f the 5th Internatinal Sympsium n Cable Dynamics (S. Margherita Ligure, 2003). Member f the Scientific Cmmittee f the 5th Internatinal Cllquium n Bluff Bdy Aerdynamics & Applicatins BBAA V (Ottawa, 2004). Scientific and rganizatinal respnsible f the 6th Internatinal Cllquium n Bluff Bdy Aerdynamics & Applicatins BBAA VI (Milan, 2008). Member f the Scientific Cmmittee f the 5th Eurpean & African Cnference n Wind Engineering (Flrence, 2009). Reviewer f sme f the mst significant Internatinal Jurnals in the field f Wind Engineering: - Jurnal f Wind Engineering and Industrial Aerdynamics - Jurnal f Fluids and Structures - Wind and Structures PARTICIPATION TO RELEVANT PROJECTS Member f the Panel f Specialists (Expert fr Aerdynamics and Aerelasticity f the bridge) fr the P.M.C. Advisry Activity cncerning Strett di Messina Suspensin Bridge, leading respnsible PARSONS. Messina Straits Crssing Prject, member f the research team in charge f the aerdynamic design f the bridge. Respnsible fr the Frth Replacement Crssing Wind Tunnel Testing (Cable Stayed
Bridge, Arup Design, Transprt Sctland Owner). Nuv Pl Fieristic, City Life and Varesine Prjects (Milan), Dambvita Center (Bucarest), Millennium Twer and Cultural Center Abuja (Nigeria): respnsible f the wind tunnel testing, defining the design wind lads f the high rise buildings and large span rfing system. High Speed Vehicles Nn Statinary Aerdynamics, respnsible f the research prject n high speed vehicles nn statinary aerdynamics in cllabratin with Ferrari Aut. Cnsultant f Parsns Crpratin, Victr Buyck Steel Cnstructin, SETEC Travaux Public et Industriels, Astaldi and ther Cnstructin Cmpanies in the field f windstructures interactin, with specific fcus n flexible structures aerelasticity, and damping f the flw-induced vibratins. Pier Fraternali Pier Fraternali is full prfessr at the Dipartiment di Elettrnica e Infrmazine, Plitecnic di Milan and Deputy Directr f the same Department. He received a Laurea Degree in Electrical Engineering (cum laude) in 1989 and a PhD in Cmputer Science frm the Plitecnic di Milan in 1994. His main research interests cncern database integrity, active databases, sftware engineering, and methdlgies and tls fr WEB applicatin develpment. He is authr f several articles n Internatinal Jurnals and Cnference Prceedings, and als the authr, with Stefan Ceri, f the bks: "Designing Database Applicatins with Objects and Rules: the IDEA Methdlgy" (Addisn-Wesley, 1997); "Designing data-intensive web Applicatins" (The Mrgan-Kaufmann Series in Data Management Systems, Jim Gray, Series Editr, December 2002). He was the technical manager f the W3I3 Prject "Web-Based Intelligent Infrmatin Infrastructures" (1998-2000). He is c-inventr f WebML (http://www.webml.rg) a mdel fr the cnceptual design f Web applicatins (US Patent 6,591,271, July 2003) and c-funder f Web Mdels (http://www.webrati.cm), a start-up f the Plitecnic di Milan fcused n the cmmercializatin f an innvative tl suite called WebRati fr the Mdel-Driven Develpment f Web applicatins. I served as Prgram Chair f the Internatinal Cnference n Web Engineering in 2004, Vice President f the Sftware Engineering Track f the WWW cnference in 2005, General Chair f the Internatinal Cnference n Web Engineering in 2007 and Area Chair f the WWW Cnference in 2010. Matte Ingaram He graduated in 1997 in architecure with a prject f Industrial Design published as excellent thesis by the Plitecnic di Trin, he tk his master degree in Strategic Design at the Plitecnic di Milan. He is PhD in Industrial Design at the Plitecnic di Milan. Since 2005 he develps his research and didactic activities as Assistant Prfessr at the Department f Industrial Design, Art and Cmmunicatin at the Plitecnic di Milan. Lecturer at Master degree curse in Design fr Prduct develpment at the Plitecnic di Milan and lecturer at the Plitecnic di Trin frm 2003. C-rdinatr f research prjects at the UdR PP (Prduct Design Research Unit INDACO Department) cncerning design driven innvatin, he is respnsible fr IDEA (InnvatinDEsign Actin) research grup. Frm its fundatin he is secretary and prfessr fr the Master Degree in Design&Engineering. He is
respnsible fr the Italian participatin t the Sin-Eurpean Design Management Netwrk. Since 2009 he is General Directr f Cnsrzi POLI.design the cnsrtium f Plitecnic di Milan fr actin research and pst graduate teaching. 2008 in Lucia Rampin (a cura di),aavv, L'impresa di success. Il design e la cmpetitività cn il saggi Prgett e Prcess vers la cmpetitività pagg. 77-88, McGraw-Hill, Milan, Dicembre 2008. 2008 in Il girnale dell Architettura, n 150, Umbert allemandi & C, Trin, Nvembre 2008, il tema del mese, Design sacr. Nvita ed event 2007 in AAVV, Il Design e la Strategia Aziendale cn il saggi Prdtt, prduzine e prfessine: il prduct design cme strument cmpetitiv pagg. 85-92, Maggili Editre, Milan, 2007. 2007 Paper dal titl: Educating Design students t Design Research fr innvatin negli atti di Shaping the future. Internatinal Cnference n Engineering and Prduct Design Educatin, Newcastle,UK, Nrthumbria University, 13-14 Settembre 2007, cn Lucia Rampin, pagg. 573-578 ISBN 978-0-9553942-1-8, Hatleys Ltd, Basildn, Essex, UK. 2007 Paper dal titl: Design and Innvatin: Actin Research fr cmpetitiveness negli atti di Cnnected 2007 Internatinal Cnference n Design Educatin, Sydney, Australia, University f New Suth Wales, 09-12 Lugli 2007, cn Lucia Rampin. Pubblicat su CDRm ISBN 978-0-646-48147-0. 2007 Paper dal titl: IT and 3d tls fr Design Teaching and research negli atti di Design n elearning: Learning and Teaching with Technlgy in Art Design and Cmmunicatin, Lndn, UK, University f the Arts Lndn, 12-14 Settembre 2007, cn Marina Carulli. Pubblicat su CDRm ISBN 978-0-9541439-7-8 2006-2007 Paper dal titl: Enhancing creativity in Higher Design Educatin: analgy as a tl fr brainstrming negli atti di Creativity r Cnfrmity? Building Cultures f Creativity in Higher Educatin, Cardiff, Wales UK, University f Wales Institute, 08-10 gennai 2007, cn Lucia Rampin. Pubblicat al sit: http://www.creativitycnference.rg/presented_papers/rampi n_enhancing.dc 2006 Paper dal titl: Prduct Design Educatin "Wrld Wide": Cultural Cntext and Teaching Prcess-an Italian case Study negli atti di D2B the 1st internatinal Design Management Sympsium, Shanghai, Shanghai Jia Tng University, 16-19 Marz 2006, cn Serena Selva, pagg. 65-75 ISBN 0-9552338-
1-X, Adelphi Research Institute, Salfrd, UK. 2005 Matte O. Ingaram (a cura di) Hard design. Il prduct design ggi tra innvazine e cmpetitività., Aracne editrice Srl, Rma, dicembre 2005 Saggi dal titl Gestire l innvazine attravers la ricerca prgettuale, pagg.13-22. 2005 Paper dal titl: Teaching n line Industrial Design practices negli atti di Design n elearning. Internatinal Cnference n Teaching and Learning with Technlgy in Art, Design and Cmmunicatin, cn Marc Maicchi, Lndra, University f the Arts, 14-16 Settembre 2005. Pubblicat su CDRm ISBN 1-903455-09-X. 2005 in AAVV, Transprtatin Design Learning cn il saggi Metdlgie e strumenti per l innvazine guidata dal design pagg. 76-94, cn Lucia Rampin, CETMA, Brindisi, lugli 2005. 2005 in Laura Gallni, Raffaella Mangiartti, (a cura di), Disegnat in Italia. Il design cme element cmpetitiv nella picclamedia impresa, Ulric Hepli Editre, Milan, Gennai 2005. Agape:l stile dell innvazine Pagg.71-80. 2004 in Francesc Trabucc, (a cura di), Macchine del Vent. Evluzine, stria, significat del ventilatre da tavl, attravers la cllezine Vrtice. Edizini Grafiche Mretti, Milan, 2004. Test in Italian e in Inglese. Prdtt, sensazine, significat Pagg. 86-96 Aerei immbili, aria in mviment Pagg. 96-111 2004 in Lucia Rampin, (a cura di), Sapere, Immaginare, Fare. Il design d innvazine per l elettrdmestic, Edizini POLI.design, Milan, dicembre 2004. Prgettare l elettrdmestic Pagg.15-22 Gli strumenti di rappresentazine del prgett Pagg. 37-42 Il prgett di innvazine Pagg. 69-76 La prima esercitazine prgettuale, Il Wrkshp finale Pagg. 99-107 2004 in Ezi Manzini, (a cura di), Fenmenlgia del design, saggi dai titli La nuva cultura del prduct design, Il rapprt cn l industria, Nuva metdica del prduct design, nel capitl Il design del prdtt. Editre PliDesign, Milan 2004. 2004 in Design Space, n 150, Shanghai, May 2004, ISSN 1003-
0069, cn Lucia Rampin, Design Research and prduct innvatin. Hw Design management can enhance creativity and influence cmpanies strategies Pagg. 10-17. 2004 in Designjurnalen, Vl. 12, n. 2/04, Sckhlm, 2004, ISSN 1400-8963, cn Lucia Rampin, Design Research and prduct innvatin. Hw Design management can enhance creativity and influence cmpanies strategies Pagg. 6-21. 2004 in V. Arquilla, A. Vignati (a cura di), Sistema Design Italia Cnfidential 11
Magazine n 01/2004, peridic semestrale n-line, ISSN 1824-2219 HPE High perfrmance engineering pagg. 5, Divanmdern.it pagg. 7. 2004 Matte O. Ingaram, (a cura di), Design e finitura dei cmpsiti derivati dal legn. Un mtre per l innvazine di prdtt, La Rivista del Clre SpA, Milan, 2004. Pubblicat su CDRm ISBN 88-85041-11-6 2004 Paper dal titl: Design research fr innvatin: integrating creativity and prduct develpment prcesses, cn Lucia Rampin, in Prceedings f the DESIGN 2004 8th Internatinal Design Cnference, Dubrvnik, May 18 21, vl. 1, Pagg. 285-296, ISBN 953-6313-61-8 2003 Paper dal titl: Innvatin fr Sustainable Service Thrugh Design: The Milan CarSharing prject, negli atti di Sustainable Innvatin 03. Creating sustainable prducts, services and prduct-service systems. Stcclma 27-29 Ottbre 2003. Pubblicat n-line nel sit www.cfsd.rg.uk/events/tspd8.html. 2003 in Verniciatura Industriale n 2 Speciale Plveri 2003, Edizine de La Rivista del Clre Spa, Vimercate, MI. Design e finitura dei cmpsiti derivati dal legn. Un mtre per l innvazine di prdtt. 2003 Paper dal titl: Prject research and prduct innvatin methds:hw design management can influence cmpanies strategies and rganisatin,pgg.3-15 negli atti di EURAM Eurpean Academy f Managegement 2003 Cnference: Managing thrugh variety: the eurpean style? Track:Design-Based Organizatin and Management, 3-5 Aprile 2003, SDA Bccni, Milan. Pubblicat n line nel sit www.sdabccni.it/en /eventi/euram/euram10.html. 2002 Matte O. Ingaram (a cura di) Design per gli spazi di lavr: ambiente, energia, nuve tecnlgie. Design fr wrking places: envirnment, energy, new technlgies., Silvana Editriale Arti Grafiche Amilcare Pizzi Milan. Test in italian e in inglese. Cap. 2.2 Gestire l innvazine attravers la ricerca prgettuale, pgg.42-53 Parte Secnda L esperienza di ricerca, pgg. 55-58 Cap. 4 La secnda fase: Analisi dei fattri evlutivi, pgg. 87- Cnfidential 12
97 Cap. 5 La terza fase: Il brief di prgett e l scenari,pgg. 98-99, 119-125 2002 in Nicletta Mrrne (a cura di) Prgettare per una mbilità sstenibile: il car sharing a MIlan - Edizini PliDesign Milan. Test in italian e in inglese. Capp. 5-6, Pagg. 119-141. 2002 Paper dal titl: Managing Design Driven Innvatin -The experience f the Prduct Design Research Unit pubblicat da DMI - Design Management Institute, Bstn, USA negli atti del 11th Internatinal Frum n Design Management Research & Educatin, 10-12 Giugn 2002, Nrtheastern University, Bstn, Massachussetts, USA. Federic Frattini is Assistant Prfessr at the Department f Management, Ecnmics and Industrial Engineering Plitecnic di Milan. He btained a PhD cum laude in Management Engineering in May, 2008, with a thesis entitled The cmmercializatin f innvatin in high-tech markets. He teaches in the Technlgy Strategy curses fr the MBA and Executive MBA prgrams at MIP-Plitecnic di Milan. His research interests are in the area f technlgy and innvatin management, with a particular fcus n renewable energies. He is ne f the funding members f the Energy&Strategy Grup f the Schl f Management Plitecnic di Milan, which carries ur research and cnsultancy prjects in the area f energy efficiency and renewable energy markets. He is authr f mre than 50 publicatins n scientific jurnals and prceeding f internatinal cnferences. He is reviewer fr the fllwing internatinal jurnals: Research Plicy, Technvatin, R&D Management, Internatinal Jurnal f Innvatin Management, Eurpean Jurnal f Innvatin Management. Since 2005, he has been member f the Italian Assciatin f Management Engineering. Selected publicatins: 1. Chiesa, V. and Frattini, F., (2009). Evaluatin and Perfrmance Measurement f Research and Develpment: Techniques and Perspectives fr Multi-Level Analysis, Edward Elgar, Cheltenham, UK, ISBN 978-1847209481. 2. Di Minin, A., Frattini, F. and Piccaluga, A. (frthcming). Fiat: Open Innvatin in a dwnturn (1993-2003). Hw the Italian carmaker successfully transfrmed its R&D strategy t maintain its technlgical capabilities, Califrnia Management Review. ISSN 0008-1256. 3. Chiarni, D., Chiesa, V. and Frattini, F. (frthcming). The Open Innvatin Jurney: hw firms dynamically implement the emerging innvatin management paradigm, Technvatin. ISSN 0166-4972. 4. Chiesa, V., Frattini, F., Lamberti, L. and Nci, G. (2009). Explring management
cntrl in radical innvatin prjects, Eurpean Jurnal f Innvatin Management, Vl. 12, N. 4, pp. 416-443. ISSN 1460-1060. 5. Bianchi, M., Chiesa, V. and Frattini, F. (2009). Explring the micrfundatins f External Technlgy Cmmercializatin: a dynamic capabilities perspective, Eurpean Jurnal f Innvatin Management, Vl. 12, N. 4, pp. 444-469. ISSN 1460-1060. 6. Chiarni, D., Chiesa, V. and Frattini, F. (frthcming). Unraveling the prcess frm Clsed t Open Innvatin: evidence frm mature, asset-intensive industries, R&D Management. 7. Chiarni, D., Chiesa, V., Frattini, F. and Turba, L. (frthcming). Explring the relatinship between incumbency and radical innvatin: the case f businesst-cnsumer e-cmmerce applicatins. Internatinal Jurnal f Entrepreneurship and Innvatin Management. 8. Chiarni, V., Chiesa, V. and Frattini, F. (2009). Investigating the adptin f pen innvatin in the bi-pharmaceutical industry: a framewrk and an empirical analysis. Eurpean Jurnal f Innvatin Management, Vl. 12, N. 3, pp. 285-305. ISSN 1460-1060. 9. Chiesa, V., Frattini, F., Lazzartti, V. and Manzini, R. (2009). Perfrmance measurement in R&D: explring the interplay between measurement bjectives, dimensins f perfrmance and cntextual factrs. R&D Management, Vl. 39, N. 5, pp. 488-519. ISSN 0033-6807. 10. Chiesa, V. and Frattini, F. (frthcming). Cmmercializing technlgical innvatin: learning frm failures in high-tech markets. Jurnal f Prduct Innvatin Management. 11. Chiesa, V., Frattini, F., Lazzartti, V. and Manzini, R. (2009). An explratry study n R&D perfrmance measurement practices: a survey f Italian R&Dintensive firms. Internatinal Jurnal f Innvatin Management, Vl. 13, N. 1, pp. 65-104, ISSN 1363-9196. 12. Chiesa, V., Frattini, F., Lazzartti, V and Manzini, R. (2009). Perfrmance measurement f Research and Develpment activities. Eurpean Jurnal f Innvatin Management, Vl. 12, N. 1, pp. 25-61, ISSN 1460-1060. 13. Chiesa, V., Frattini, F. and Manzini, R. (2008). Managing and rganising technical and scientific service firms: a taxnmy and an empirical study. Internatinal Jurnal f Services Technlgy and Management, Vl. 10, Ns. 2/3/4, pp. 211-234. ISSN 1460-6720 14. Chiesa, V., Frattini, F., Lazzartti, V. and Manzini, R. (2008). Designing a perfrmance measurement system fr the research activities: a reference framewrk and an empirical study. Jurnal f Engineering and Technlgy Management, Vl. 25, pp. 213-226. ISSN 0923-4748 15. Chiarni, D., Chiesa, V., De Massis, A. and Frattini, F. (2008). The knwledge bridging rle f technical and scientific services in knwledge-intensive industries. Internatinal Jurnal f Technlgy Management, Vl. 41, N. 3/4, pp. 249-272. ISSN 0267-5730 16. Chiarni, D., Chiesa, V. and Frattini, F. (2008). Patterns f cllabratin alng the bipharmaceutical innvatin prcess. Jurnal f Business Chemistry, vl. 5, N. 1, pp. 7-22. ISSN 1613-9615.