800-356-1480 256 852-0378 256 852-0388 fax GEOMEMBRANE LINERS, GEOSYNTHETIC SYSTEMS & FLOATING COVERS FOR LAGOONS Floating covers for odor control. Floating cover with gas extraction system. 1
Your Total Containment Resource GEOMEMBRANE LINERS, GEOSYNTHETIC SYSTEMS & FLOATING COVERS FOR LAGOONS Solid waste liner installation. Landfill closure with HDPE & other geosynthetics. Specialized Geomembrane liner installations for secondary containment. 2
800-356-1480 256 852-0378 256 852-0388 fax CONCRETE PROTECTIVE LINERS Concrete protective liner custom fabricated structures. Pump bases installed with lined trenches. Pump bases with secondary containment. Prefabricated double-contained sump liners. 3
Your Total Containment Resource CONCRETE PROTECTIVE LINERS INDUSTRIAL WASTEWATER SUMPS Polypropylene pipe penetration. Form tie caps welded to liner. tie caps Liner system with beam pockets. Field fabrication services. 4
Project Report Industrial wastewater neutralization plant Installation of 5mm HDPE tank concrete protective liners. 2 each Equalization tank liners - 25 w x 25 l x 17.5 d 2 each neutralization tanks - 10 w x 10 l x 17.5 d Total - 7,000 square feet View of project with plastic cover to maximize welding environment. Floor slab was poured and internal forms were placed. Liner was not installed in the floor at this time. Floor elevation is approx. 3 below finished elevation. Oversized pre-fabricated concrete protective liner panels were placed on forms. Internal view of wall. After concrete was poured and cured, the forms were removed. The liner panels were then welded together and all tie holes were capped. Screeds were formed and poured in floor. Strips of concrete protective liner were then placed on the screeds. Concrete was placed and screeded. 5
Project Report Continued Industrial wastewater neutralization plant Installation of 5mm HDPE concrete protective liners 2 each Equalization tank liners - 25 w x 25 l x 17.5 d 2 each neutralization tanks - 10 w x 10 l x 17.5 d Total - 7,000 square feet Floor panels were placed between screeds. Plywood was placed on panels and concrete blocks were used to keep the panels in place until the concrete cured. Floor panels were prepared for welding in the areas where they intersected on top of the screed strips. Welding of floor panels. Floor sloped to a sump. This photo shows a closeup of the wall and floor weld. 3455 Stanwood Blvd. Huntsville, Alabama 35811 256 852-0378 256 852-0388 fax Closeup of pipe penetrations Closeup of welded seams between panels and wall tie caps. (All welds are spark tested to ensure the liner system s integrity.) 6
Project Report Tank process area containment concrete protective liners Installation of 5mm HDPE non-skid floor, trench and sump liners. Approximately 2,500 square feet of lined area. Tank pad fabricated from HDPE plate. Process area non-skid floor lining. Lined trench with lined floor and acid brick tie-ins. 7
Project Report Tank process area containment concrete protective liners Installation of 5mm HDPE non-skid floor, trench and sump liners. Approximately 2,500 square feet of lined area. Lined sump. Non-skid floor liner Fabricated handrail base plates Floor and sump with fabricated HDPE gutter. Process area with equipment installed. 8
Project Report Pre-cast concrete pump station Installation of a double contained embedded HDPE concrete protective liner 6 0 diameter x 25 4 deep. Fabricated HDPE manhole liners. Manhole tops. The double contained pre-fabricated CPL cylinders are shown here ready for shipment to the concrete precaster. Foam disks were placed in penetration areas to block out concrete when poured. Close-up view of structure with HDPE valve & pipe penetrations connected. The secondary liner is extrusion welded and a 2 cap strip is extrusion welded to the primary liner. View of penetrations from structure interior. A non-destructive vacuum test was performed on the annular space between the primary and secondary liners to ensure system integrity. 9
Your Total Containment Resource DOUBLE CONTAINED TRENCH LINER SYSTEMS Shop fabricated trench liners. Liner system cast in place. Leak detection monitoring pipe. Fabric faced concrete protective liner seat for floor coating tie-in. 10 Formed liner system installation. Field welding and testing.
800-356-1480 256 852-0378 256 852-0388 fax TRENCH LINER INSTALLATION Pouring grout around formed liner system. Final grout placement. Copper sheathing for spark test. Trench liner joint preparation. Extrusion welding of trench sections. Spark testing welded sections. 11
Your Total Containment Resource CONCRETE PROTECTIVE LINER CUSTOM FABRICATED STRUCTURES PRE-FABRICATED TRENCHES Pre-fabrication of sloped trenches with grating seats. Pre-fabricated trench system layout for quality control. 12
800-356-1480 256 852-0378 256 852-0388 fax FABRICATED HDPE MANHOLES Manhole for acid sewer. Manhole section with ladder for landfill. Pre-fabricated manholes for landfill sludge system. Landfill sludge dewatering system with perforated piling and perforated HDPE header. 13
Your Total Containment Resource FABRICATED HDPE MANHOLES 120 x 90 double-contained HDPE pump station. Leachate collection system. Custom fabricated HDPE stuctures. 14
CUSTOM FABRICATED HDPE STRUCTURES HDPE fabricated distribution header box. HDPE specialized fabrication centrifugal separator. FABRICATED STRUCTURES PVC fabricated tanks. Reinforced free standing polypropylene tank. POLYPROPYLENE TANKS 15
CONTAINMENT PIPE Pre-fabricated dual containment pipe. Dual containment pipe assembly with spacer. Single and dual wall fabricated pipe fittings. FIELD FUSION SERVICES 16 Leachate force main. Landfill slope risers.
Your Total Containment Resource 3455 Stanwood Blvd. Huntsville, Alabama 35811 800-356-1480 256 852-0378 256 852-0388 fax