Sub-base mounted /, / and / Spool valves Solenoid actuated and pilot operated Ø mm or G/8 High flow from mm body width Compact, sub-base mounted valves Wide range of voltages available Surface or DIN-rail mounting Wide range of sub-bases for up to 0 stations Technical data Medium: Compressed air, filtered, lubricated and non-lubricated Operation: Spool valve, indirectly actuated Mounting: Through-holes in sub-base or DIN-rail fixing Port Size (sub-base): Ø mm, G/8 Operating Pressure: Maximum 0 bar See individual details overleaf Flow Characteristics: Size Function C b A l/min Cv Kv G/8 /,/,87 0, 7,9 0, 0,9 Ø mm /,/,7 0,,8 9 0, 0, Ø mm / APB,9 0,0, 7 0,8 0, Ambient Temperature: -0 C to +80 C pilot models -0 C to +0 C solenoid models (onsult our Technical Service for use below + C) Materials Body and end caps: zinc alloy, Co-polymer: glass filled Spool and modular bases: aluminium Seals: nitrile rubber Ordering information See page Multipole systems Valve Islands - for complete pre-assembled valve islands please contact our technical service For multipole valve islands please see data sheet.. Accessories Connecting plugs and light emitting seals see section 7.7.00 N/en...0
General information / solenoid actuated valves Symbol Model Manual Solenoid Operator Return Operating Pilot Weight Spares kit Overide Pilot pressure pressure (bar) (bar) (kg) V09R-#*A Screwdriver bi-stable Internal Solenoid Spring and air... 0-0,0 V00-K0 0 V09R-#*A push button spring return V09R-#*A Screwdriver bi-stable External Solenoid Spring and air... 0... 0 0,0 V00-K0 V09R-#*A push button spring return / solenoid actuated valves Symbol Model Manual Solenoid Operator Return Operating Pilot Weight Spares kit Overide Pilot pressure pressure (bar) (bar) (kg) V09R-#*A Screwdriver, bi-stable Internal Solenoid Spring and air... 0-0, V00-K00 V09R-#*A push button spring return V09R-#*A Screwdriver, bi-stable External Solenoid Spring and air... 0... 0 0, V00-K00 V09R-#*A push button spring return V09R-#*A Screwdriver, bi-stable Internal Solenoid Solenoid... 0-0,98 V00-K00 V09R-#*A push button spring return V09R-#*A Screwdriver, bi-stable External Solenoid Solenoid... 0... 0 0,98 V00-K00 V09R-#*A push button spring return V09R-#*A Screwdriver, bi-stable Internal Solenoid Air... 0-0, V00-K00 V09R-#*A push button spring return / Solenoid Actuated Valves Symbol Model Manual Solenoid Operator Mid Return Operating Pilot Weight Spares kit Mounting Overide Pilot position pressure pressure option (bar) (bar) (kg) V09R-#*A Screwdriver, bi-stable Internal Solenoid APB Solenoid... 0-0,0 V00-K0 All bases V09R-#*A Push button 8 8 8 8 / 8 8 8 8 / 8 8 V09R-#*A Screwdriver, bi-stable External Solenoid APB Solenoid... 0... 0 0,0 V00-K0 Sub-base V09R-#*A Push button V097R-#*A Screwdriver, bi-stable Internal Solenoid COE Solenoid... 0-0,0 V00-K0 All bases V097R-#*A Push button V097R-#*A Screwdriver, bi-stable External Solenoid COE Solenoid... 0... 0 0,0 V00-K0 Sub-base V097R-#*A Push button V098R-#*A Screwdriver, bi-stable Internal Solenoid COP Solenoid... 0-0,0 V00-K0 All bases V098R-#*A Push button 8 8 / V098R-#*A Screwdriver, bi-stable External Solenoid COP Solenoid... 0... 0 0,0 V00-K0 Sub-base V098R-#*A Push button # Insert pin orientation: E=up, D=down * Insert voltage code from table below. APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure. Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/en...0
Pilot actuated valves Symbol Model Operator Mid Return Operating Pilot Weight Spares kit Mounting position pressure pressure option (bar) (bar) (kg) V09R-X00 Pilot - Spring and Air... 0, + 0, x supply 0, V00-K00 All bases V09R-X000 Pilot - Pilot... 0... 0 0, V00-K00 All bases V09R-X000 Pilot priority - Pilot... 0... 0 0, V00-K00 All bases V09R-X000 Pilot APB Pilot... 0... 0 0,8 V00-K0 All bases V097R-X000 Pilot COE Pilot... 0... 0 0,8 V00-K0 All bases V098R-X000 Pilot COP Pilot... 0... 0 0,8 V00-K0 All bases APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure Voltage codes and spare solenoid kits Solenoid Kit Part Number Push MO Turn MO Voltage Code Power Pin Up Pin Down Pin Up Pin Down V d.c. W V8-P V8-P V8-T V8-T V d.c. W V8-P V8-P V8-T V8-T V 0/0 Hz W V8-P V8-P V8-T V8-T 0 V 0/0 Hz 8 W V8-P8 V8-P8 V8-T8 V8-T8 0 V 0/0 Hz 9 W V8-P9 V8-P9 V8-T9 V8-T9 Electrical details for solenoid operators Voltage tolerances: -0/+% Rating: 00% E.D. Inlet orifice: 0,8 mm Electrical connection: DIN 0 table C Manual override: V09****R-**A - Screwdriver bi-stable V09****R-**A - Push button, spring return Protection class: IP (DIN 000) For details of connector plugs and light emitting seals see section 7.7.00. Ordering information To order, quote model number and voltage code from tables overleaf, e.g. V09R-EA for a solenoid pilot actuated, spring and air return model fitted with a V d.c. coil (pin up configuration) and screwdriver operated manual override. N/en...0
Sub-bases Modular sub-base End plate kit Single sub-base Fixed length sub-base V09R-Q0G (G/8 ports) V09R-Q0G Optional tie rod kits V008-G00 V009-G0*) (push-in cartridges) V09R-Q0 (push-in cartridges) V08A-Q00...00 V000-G0*) (G/8 ports) *) Please insert the station no., or *) Please insert the station no., or 8 Accessories Sandwich plate flow regulator Blanking plate DIN rail mounting kits Din rail Blanking plug V09A-Q00 V09A-Q00 V0007-K00 for V000-G** bases V0009-C00 metre V0-K0 V0008-K00 for V009-G** bases Blanking disk set Intermediate supply/exhaust plate Pressure switch assembly V09A-Q900 V09A-Q0G V09A-Q00 N/en...0
V09*R-E... models / single solenoid valves, pin orientation up V09*R-D... models / single solenoid valves, pin orientation down V09***R-D... models / double solenoid valve, pin orientation down V09R-X00 and V09R-X000 / single pilot and priority pilot valves V09R-X000 / double pilot valve V09*R-X000 / double pilot valve, M, x 0,, 7 M, 9,,, 7 9, M,, 98, 9, M,, 98, V09***R-E... models / double solenoid valves, pin orientation up M, 9,,, Manual override Fixing screws, M, x 0,,, 8, M,x0, 7,, N/en...0
Modular sub-bases for DIN-rail or surface mounting 9, 7, Modular sub-base V09R-Q0G Modular sub-base G/8 9 9, / 0, Modular sub-base with Push-in fitting V09R-Q0 Modular sub-base Ø PIF, G/,,, End plate kit V09R-Q0G Consisting of left hand and right hand end cap and DIN rail mounting system. (N x 8) +, 9 8, 7,9 8 Tie rod kits V08A-Q0** ** = number of stations in manifold, 0 to 0 Consisting of x barrel nut, x tie rod and x M nut Dual pressure blanking disk set V09A-Q900, Right hand end Left hand end G/8 or ø mm Pneufit N = Number of stations N/en...0
Single sub-base,, 0 8 0, Side ported sub-base V008-G00 Single station side ported sub-base. G/8 0 7, 0 Fixed length sub-bases with Ø mm push-in cartridges 8, B Type No. of stations A B V009-G0 8 V009-G0 8 8 V009-G0 8, 9,, 0 8 8 8, A 0, G/ 9, 7, 8 8 8,,, 8 Fixed length sub-bases with G/8 connections A, G/8 B 7 0 7 Type No. of stations A B V000-G0 08 8 V000-G0 8 V000-G08 8 80 0 Note: These sub-bases can not be used with Pilot valves or solenoid valves with External pilot supply. 7 G/8,,7 8 8 8 N/en...07
DIN-rail mounting kits V0007-K00 Kit for adapting V000-G** series bases to DIN 77-, BS8 and CENELEC EN 0.0 mounting rail. Blanking plate V09A-Q00 Blanking plate for blocking off unwanted stations.,, A, 7, 8 M, Sandwich plate flow regulator V09A-Q00 Fits between valve body and sub-base to provide compact exhaust flow regulation. 9 7, 8 0 Intermediate supply/exhaust module V09A-Q0G 0,00 kg /8 NPT, Rc/8, G/8. Provides additional porting on Modular Sub-base or Fixed Length Manifold systems. Occupies one valve station. Supplied with gaskets for Sub-base and Manifold mounting. Can be used to: Improve supply flow Increase exhaust capacity Pneumatically separate valves used on Valve Islands for fail safe in emergency Supply and exhaust twin supply valves 8 M, Pressure switch assembly V09A-Q00 0,0 kg Used in conjunction with a suitable P.L.C. based control system. Valves will not operate until the pressure on the valve island is above a pre-set level. 0,9, 0 9 8, ø,8 /8 0 8 8 0 9 9 9 Pressure adjustable screw Interface for sub-base. N/en...08