HF3 Relay n YDesign n Frequency range DC to 3GHz n Impedance Ω or 7Ω n Small dimensions (4.x7.2xmm) n form C contact ( changeover contact) n Immersion cleanable n Low power consumption ( 4mW) Typical applications Cable modems and linecards/ CATV, Tabs, measurement and test equipment ATE, satellite / audio / video tuners, wireless base stations and antennas, switching boards Contact Data Contact arrangement form C, CO Max. switching voltage 22VDC, 2VAC Rated current 2A Limiting continuous current, 23 C 2A Switching power W, 2.VA, W (2.GHz) Max. continuos RFpower, 23 C W (2.GHz) Contact material Ag, Au covered Minimum switching voltage µv Initial contact resistance <mω at ma, 3mV Operate time typ. 3ms, max. ms Release time without diode in parallel typ. 2ms, max. ms with diode in parallel typ. 4ms, max. ms Bounce time typ. ms, max. 3ms Duration of set/reset pulse min. 2ms Mechanical endurance 7 operations Coil Data Coil voltage range 3 to 24VDC Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC Ω±% mw Ω version, monostable, coil 3 2.2..3 4 4 2 4. 3.38 9.8.4 4 4 3 3.7 78 4 4 4. 3.. 27 4 9.7 9. 74 4 2 9. 2..2 28 4 7 24 8. 2.3 2.4 44 4 7Ω version, monostable, coil 3 2.2..3 4 4 2 4. 3.38 9.8.4 4 4 3 3.7 78 4 4 4. 3.. 27 4 9.7 9. 74 4 2 9. 2..2 28 4 7 24 8. 2.3 2.4 44 4 All figures are given for coil without preenergization, at ambient temperature +23 C. Coil Data (continued) Coil versions, bistable Coil Rated Set Limiting Reset Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC Ω±% mw Ω version, bistable, coil 7 3 2.2 9.2 2.2 28 7 72 4. 3.38 3.8 3.38 289 7 73 3.7.3 3.7 37 7 74 4. 8. 4. 4 7 7 9.7 27.7.7 7 7 7 2 9. 37. 9. 27 7 77 24 8. 74. 8. 8228 7 Ω version, bistable, 2 coils 9 3 2.2. 2.2 4 4 92 4. 3.38 9.8 3.38 4 4 93 3.7 3.7 78 4 94 4. 3. 4. 27 4 9 9.7 9..7 74 4 9 2 9. 2. 9. 28 4 97 24 8. 2.3 8. 44 4 All figures are given for coil without preenergization, at ambient temperature +23 C. Coil Data (continued) Coil versions, bistable Coil Rated Set Limiting Reset Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC Ω±% mw 7Ω version, bistable, coil 2 3 2.2 9.2 2.2 28 7 22 4. 3.38 3.8 3.38 289 7 23 3.7.3 3.7 37 7 24 4. 8. 4. 4 7 2 9.7 27.7.7 7 7 2 2 9. 37. 9. 27 7 27 24 8. 74. 8. 8228 7 7Ω version, bistable, 2 coils 4 3 2.2. 2.2 4 4 42 4. 3.38 9.8 3.38 4 4 43 3.7 3.7 78 4 44 4. 3. 4. 27 4 4 9.7 9..7 74 4 4 2 9. 2. 9. 28 4 47 24 8. 2.3 8. 44 4 All figures are given for coil without preenergization, at ambient temperature +23 C. 2, Rev. according to IEC 8 and to be used
Coil operating Range Coil Voltage [U/Unom] Coil Voltage [U/Unom] 3. 3 2. 2. 4 mw Umax. at A Unom. nominal coil voltage Uop. min. Urel. min. Ambient Temperature [ C] 7 mw Umax. at A Unom. nominal coil voltage RF Data Isolation at MHz/9MHz 8dB/72dB 8dB/72dB at 3GHz 4dB 4dB Insertion loss at MHz/9MHz.3dB/.2dB.3dB/.2dB at 3GHz.3dB.4dB Voltage standing wave ratio (VSWR) at MHz/9MHz/3GHz./.2/.2./.2/.4 Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at /customersupport/rohssupportcenter Ambient temperature C to +8 C Thermal resistance <K/W Category of environmental protection IEC 8 RT III wash tight Degree of protection, IEC 29 IP 7, immersion cleanable Vibration resistance (functional) 3g, to Hz Shock resistance (functional), half sinus ms g Shock resistance (destructive), half sinus ms g Terminal type SMT Weight max. 2.g Resistance to soldering heat SMT Peak Value IEC 828 2 C Moisture sensitive level, JEDEC JStd2D MSL3 Ultrasonic cleaning not recommended Packaging/unit reel/4 pcs., box/4 or 2 pcs. Uop. min. 4 3 2 2 3 4 7 8 9 2 3 Ambient Temperature [ C] Insulation Data Ω version 7Ω version Initial dielectric strength between open contacts V rms between contact and coil V rms Initial surge withstand voltage between open contacts V between contact and coil V 2 2, Rev. according to IEC 8 and to be used
Typical RF performance, Ω version Isolation [db] 2 4 8 2 2 2 3 Frequency [Mhz] Typical RF performance, 7Ω version 2 Isolation [db] 4 8 2 2 2 Typical RF performance, Ω version (continued). Insertionloss [db] VSWR..2.3.4 2 2 3.2.2.... 2 2 3 Frequency[Mhz] Terminal assignment TOP view on component side of PCB Typical RF performance, 7Ω version (continued). Insertionloss [db] VSWR..2.3.4 2 2 Frequency [Mhz].2.2.... 2 2 Frequency[Mhz] Monostable Bistable, coil Bistable, 2 coils + set reset + 22 2 2 9 8 7 4 3 2 2 3 4 7 8 9 + reset Contacts are shown in reset condition. Contact position might change during transportation and must be reset before use. set + 2, Rev. according to IEC 8 and to be used 3
AA AA RF Signal Relays PCB layout TOP view on component side of PCB Ω version 7Ω version LOC DIST Dimensions HJ REVISIONS THIS DRAWING IS A CONTROLLED DOCUMENT. P LTR DESCRIPTION DATE DWN APVD 4. +. C Printing 2JUL29 UKo HD D Printing 9JUL2 UKo HD D REVIESED PER eco 9JUL2 RK HMR D2 REVISED Ω PER version ECO772 (ECR394) 4JUN23 UKo AK 7.2 +. A LOC DIST HJ REVISIONS THIS DRAWING IS A CONTROLLED DOCUMENT. P LTR DESCRIPTION DATE DWN APVD C Printing 2JUL29 UKo HD D Printing7Ω version 9JUL2 UKo HD D REVISED PER ECO 2MAR2 UKo HMR D2 REVISED PER ECO772 (ECR394) 4JUN23 UKo AK 4. +. 7.2 +. A 3 2 +. + 3 2 2 +. + 3.8 +. 3.8 +. 2.4 +..8 Coplanarity<=.mm.8 2.4 +..4 4.9.7 9.4 +.2.2. A 4..7 RELEASED FOR PUBLICATION ALL RIGHTS RESERVED. Coplanarity<=.mm Coplanarity<=.mm 3.8 +. 3.8 +. 3.8 2.4 +. +. 2.4 +. 3.8 +. 2.4 +..8.8.4 2.4 +..4 4.9.7 9.4 +.2.2. A 4..7 22 2 2 9 8 7 4 3 2 4. 22 2 2 9 8 7.7 4 3 2 22 2 2 9 8 7 4 3 2 7.2 C COPYRIGHT 2 BY TE Connectivity S DIMENSIONS: DWN APPLICATION SPEC AUG22 MATERIAL FINISH CHK AUG22 HD 92 TOLERAES UNLESS THERWISE SPECIFIED: APVD AUG22 DIN 78m HD 92 PRODUCT SPEC NAME HF3Relay (3/) XX = Relay type zz = nominal voltage YYWW = Date code NNNN = Lot number mm.8.8.27 +..27 +..3 +..3 +. SIZE.27 2.4 CAGE CODE DRAWING 2 3 4 7 8 9 UKo 993 Dimensions DRAWING ALIAS: TE Connectivity RESTRICTED TO.8.3 +..3 +. 4 WEIGHT 2, Rev. A4 779 422 CUSTOMER DRAWING SCALE SHEET OF according to IEC 8 3: and to be used D2 REV.7 7.2 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 2 BY TE Connectivity 493 (3/).8.27 +..27 +. A4.27 2.4 Relay housing 2 3 4 7 8 9. XX = Relay type.27 +..27 +. zz = nominal voltage YYWW = Date code Relay housing Relay housing NNNN = Lot number.27.3 +..3 +.. DIMENSIONS: DWN AUG22 MATERIAL FINISH UKo 993 mm 2.4 CHK AUG22 HD 92 TOLERAES UNLESS OTHERWISE SPECIFIED: APVD AUG22 TE Connectivity DIN 78m HD 92 PRODUCT SPEC PLC NAME H2DOK2 PLC HF3Relay 7 2 PLC 3 PLC Dimensions APPLICATION SPEC 4 PLC SIZE CAGE CODE DRAWING RESTRICTED TO ANGLES WEIGHT 779 422 SCALE SHEET OF REV CUSTOMER DRAWING 3: D2 2 3 4 7 8 9 7.2
Processing Packing Tape and reel for SMT Resistance to soldering heat Reel dimensions Infrared soldering temperature/time profile (lead and housing peak temp.) Temperature [ C] Time [s] Recommended soldering conditions Vapour phase soldering 2 to 4s 24 C full line: typical dotted line: process limits Temperature [ C] 8 C 3 C external preheating C forced cooling Vapour phase soldering temperature/time profile (lead and housing peak temp.) Time [s] 2, Rev. according to IEC 8 and to be used
Product code structure Typical product code HF3 3 Type Coil HF3 Signal Relays HF3 Series form C, CO Coil code: please refer to coil versions table Performance type x Ω version, monostable coil x 7Ω version, monostable coil 7x Ω version, bistable coil 2x 7Ω version, bistable coil 9x Ω version, bistable 2coils 4x 7Ω version, bistable 2coils Product code Arrangement Version Coil Coil type Part number HF3 form C ( CO) ohm 3VDC Monostable 42 HF3 2 4.VDC 42 HF3 3 VDC 422 HF3 4 VDC 427 HF3 9VDC 423 HF3 2VDC 424 HF3 7 24VDC 42 HF3 7 form C ( CO) ohm 3VDC Bistable coil 42 HF3 72 4.VDC 428 HF3 73 VDC 427 HF3 7 2VDC 429 HF3 9 form C ( CO) ohm 3VDC Bistable 2 coils 42 HF3 92 4.VDC 242 HF3 93 VDC 422 HF3 9 9VDC 423 HF3 9 2VDC 424 HF3 97 24VDC 42 HF3 form C ( CO) 7ohm 3VDC Monostable 42 HF3 2 4.VDC 42 HF3 3 VDC 422 HF3 2VDC 424 HF3 7 24VDC 42 HF3 2 form C ( CO) 7ohm 3VDC Bistable coil 42 HF3 23 VDC 427 HF3 2 2VDC 429 HF3 4 form C ( CO) 7ohm 3VDC Bistable 2 coils 42 HF3 43 VDC 422 HF3 4 2VDC 424 HF3 47 24VDC 42 This list represents the most common types and does not show all variants covered by this data sheet. Other types on request 2, Rev. according to IEC 8 and to be used