SKR - industry relay
|
|
|
- Richard Mark Leonard
- 7 years ago
- Views:
Transcription
1 SKR - industry relay the universal relay SKR the time module STM the socket The strengths of the SKR industry relay lie in the mature and thoughtout construction. Over-average contact safety and life time, electrical and mechanical status indication as well as the unsurpassed construction from only six assemblies makes the relay to the excellent power switch. 8 adjustable functions and 8 selectable time ranges: these are the special features of the time module STM. With only one version of the module all essential features as operating voltage, functions and time ranges are adjustable. The result: a simple and cost-effective warehousing. Simple to handle screw-terminal and clear, rich in contrast labeled clamp identification, are the base for a problemles use. The ZKE/ZKX sockets permit a rapid and secure installation. The separated inputs and outputs are located at one level. There is also the possibility to plug a time module STM or other additional modules together with the SKR relay. features simple construction high contact load contact spring in Beryllium bronze safe wire diameter long life time large coil room electrical or mechanical status indication integrated manual actuation simple installation indelible scheme on socket or cover following international standards applications mostly used where a timedependent event must be headed switch panel making machine industry illuminations locking of functions gate control machine control 4 catalog 00 e / 04.03
2 type number key SKR 5 A... 04VDC coil voltage VDC = direct current VAC = alternating current standard voltage VAC: 04, 5, 30 V VDC: 04, 0 options D = double contact (AgCuNi) L = electrical position indication F = free wheel diode FL= free wheel diode and electrical position indication B = without manual actuation T = push-button actuation C = current coil relay version SKR 085 A SKR 5 A SKR A A = mechanical position indication standard: manual actuation order samples manual actuation position indication free wheel diode LED display SKR085 A VDC/AC SKR5 A VDC/AC SKR A VDC/AC SKR085 AF VDC SKR5 AF VDC SKR AF VDC SKR085 AL VDC/AC SKR5 AL VDC/AC SKR AL VDC/AC SKR085 AFL VDC SKR5 AFL VDC SKR AFL VDC catalog 00 e /
3 SKR085 - industry relay, 8-pole Industry relay with two change-over contacts in different versions. order numbers serial version SKR 085 A... VDC/AC with mechanical position indication contact specifications contact material contact type nominal switching capacity electric life expectancy inrush current max. switching current range switching power range AgCuNi single contact 50 VAC 0 A AC 500 VA 440 VAC 4 A AC app. 700'000 operations 50 VAC, 0 A, AC (360 operations/h) 40 A for 00 ms 50 ma to 0 A 0,3 VA(W) to 500 VA options general data electrical position indication SKR 085 L.. with free wheel diode SKR 085 F.. electrical position indication with free wheel diode SKR 085 FL.. double contact SKR 085 D.. without manual actuation SKR 085 B.. push-button actuation SKR 085 T.. current coil SKR 085 C.. (combinations with mechanical and electrical position indication and free-wheel diode are possible) mechanic life expectancy > 0 8 operations mechanical switching frequency 0 Hz pull-in time ms at DC / 3-0 ms at AC release time 3,5 ms at DC / -5 ms at AC bounce time normally open contact 3,5 ms at DC / 3-6 ms at AC bounce time break contact 9 ms at DC / 6- ms at AC shock resistance AK: > 0 g vibration resistance 0-55 Hz, AK: 0 g, RK: 3 g test voltage, coil/contact 500 Veff test voltage, open contact 500 Veff insulation resistance 0 Ohm weight app. 80 g installation situation any ambient temperature max. +70 C protection standard IP 40 accessories tests, instructions plug-in socket ZVE 8 ZKE 088 metal clamp ZKR 008 certificates insulation group UL, CSA, VDE VDE 00 / group C 50 VAC 6 catalog 00 e / 04.03
4 A 7 A 8 circuit diagram dimensions coil specifications UB nominal voltage UN rated voltage 3,0,5,0,5,0 0,5 energizing voltage range ambient temperature C DC-relay AC-relay standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9,6 0, /-0 4 9,, 50, / ,4,4 5, / ,0 5,5, 9'000 +/ ,0 7,58 9'000 +/-5 standard coils for alternated current (other voltages on enquiry) - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. VAC 9,6 0,6 3,3 +/-0 4 9,, / ,4, / ,0 5,5 3 '0 +/ ,0,0 4'450 +/ ,5,5 5'600 +/-0 catalog 00 e /
5 SKR5 - industry relay, -pole Industry relay with three changeover contacts in different versions order numbers serial version SKR 5 A... VDC/AC with mechanical position indication contact specifications contact material contact type nominal switching capacity electric life expectancy max. inrush current switching current range switching power range AgCuNi single contact 50 VAC 0 A AC 500 VA 440 VAC 4 A AC app. 700'000 operations 50 VAC, 0 A, AC (360 operations/h) 40 A for 00 ms 50 ma to 0 A 0,3 VA to 500 VA options general data electrical position indication SKR 5 L.. with free wheel diode SKR 5 F.. electrical position indication with free wheel diode SKR 5 FL.. double contact SKR 5 D.. without manual actuation SKR 5 B.. push-button actuation SKR 5 T.. current coil SKR 5 C.. (combinations with mechanical and electrical position indication and free-wheel diode are possible) mechanic life expectancy > 0 8 operations mechanical switching frequency 0 Hz pull-in time ms at DC / 3-0 ms at AC release time 3,5 ms at DC / -5 ms at AC bounce time normally open contact 3,5 ms at DC / 3-6 ms at AC bounce time break contact 9 ms at DC / 6- ms at AC shock resistance AK: > 0 g vibration resistance 0-55 Hz, AK: 0 g, RK: 3 g test voltage, coil/contact 500 Veff test voltage, open contact 500 Veff insulation resistance 0 Ohm weight app. 80 g installation situation any ambient temperature max. +70 C protection standard IP 40 accessories tests, instructions plug-in socket ZVE ZKE 8 ZKX 8 time module STM 00 metal clamp ZKR 008 certificates insulation group UL, CSA, VDE VDE 00 / group C 50 VAC 8 catalog 00 e / 04.03
6 A A 3 circuit diagram dimensions coil specifications UB nominal voltage UN rated voltage 3,0,5,0,5,0 0,5 energizing voltage range ambient temperature C DC-relay AC-relay - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9,6 0, /-0 4 9,, 50, / ,4,4 5, / ,0 5,5, 9'000 +/ ,0 7,58 9'000 +/-5 standard coils for alternated current (other voltages on enquiry) VAC 9,6 0,6 3,3 +/-0 4 9,, / ,4, / ,0 5,5 3 '0 +/ ,0,0 4'450 +/ ,5,5 5'600 +/-0 catalog 00 e /
7 SKR - industry relay, PCB version Industry relay with three changeover contacts in different versions order numbers serial version SKR A... VDC/AC with mechanical position indication contact specifications contact material contact type nominal switching capacity electric life expectancy max. inrush current switching current range switching power range AgCuNi single contact 50 VAC 0 A AC 500 VA 440 VAC 4 A AC app. 700'000 operations 50 VAC, 0 A, AC (360 operations/h) 40 A for 00 ms 50 ma to 0 A 0,3 VA to 500 VA options general data electrical position indication SKR L.. with free wheel diode SKR F.. electrical position indication with free wheel diode SKR FL.. double contact SKR D.. without manual actuation SKR B.. push-button actuation SKR T.. current coil SKR C.. (combinations with mechanical and electrical position indication and free-wheel diode are possible) mechanic life expectancy > 0 8 operations mechanical switching frequency 0 Hz pull-in time ms at DC / 3-0 ms at AC release time 3,5 ms at DC / -5 ms at AC bounce time normally open contact 3,5 ms at DC / 3-6 ms at AC bounce time break contact 9 ms at DC / 6- ms at AC shock resistance AK: > 0 g vibration resistance 0-55 Hz, AK: 0 g, RK: 3 g test voltage, coil/contact 500 Veff test voltage, open contact 500 Veff insulation resistance 0 Ohm weight app. 80 g installation situation any ambient temperature max. +70 C accessories tests, instructions PCB socket ZKR 003 metal clamp ZKR 008 certificates insulation group UL, CSA, VDE VDE 00 / group C 50 VAC 0 catalog 00 e / 04.03
8 6 48 7,6 30, ,08 5,08 7,6 0,6 0, ,3 ±0, 30,48 38,5 a b 5,4 3 circuit diagram 37 drilling plan (view on solder side) dimensions 35 5,4 0,6, x 0,8 coil specifications UB nominal voltage UN rated voltage 3,0,5,0,5,0 0,5 energizing voltage range ambient temperature C DC-relay AC-relay - single relay, no heat concentration by surrounding components with self-heating. - on time 00% ) max. energizing voltage without contact load ) min. energizing voltage (guaranteed value), without operation in advance. standard coils for direct current (other voltages on enquiry) rated pull-in reset nominal resistance voltage voltage voltage current Ohm tolerance VDC at 0 C at 0 C ma at 0 C % 9,6 0, /-0 4 9,, 50, / ,4,4 5, / ,0 5,5, 9'000 +/ ,0 7,58 9'000 +/-5 standard coils for alternated current (other voltages on enquiry) VAC 9,6 0,6 3,3 +/-0 4 9,, / ,4, / ,0 5,5 3 '0 +/ ,0,0 4'450 +/ ,5,5 5'600 +/-0 catalog 00 e / 04.03
9 SKR-contact specifications AgCuNi single contact current (A) ,8 0,6 0,4 0,3 0, load limit curve for DC 0, voltage (VDC) ) inductive load, L/R 40 ms ) resitive load data valid for relay SKR 085 SKR 5 SKR contact material AgCuNi (Ag,88 Ni0,) contact type single contact nominal switching capacity 50 VAC 0 A AC 500 VA 440 VAC 4 A AC 600 VA electric life expectancy app. 700'000 operations 50 VAC 0 A AC (360 operations/h) max. inrush current 40 A for 0 ms switching current range 30 ma to 0 A switching power range 0,8 VA to 500 VA contact resistance 0 mω contact life time 8 7 number of operations A switching current (A) - AC load cos phi (AC) - 50 VAC 50 Hz 360 operations/h AgCuNi double contact current (A) ,8 0,6 0,4 0,3 0, load limit curve for DC 0, voltage (VDC) ) inductive load, L/R 40 ms ) resitive load data valid for relay contact material contact type nominal switching capacity electric life expectancy max. inrush current switching current range switching power range contact resistance SKR 085D SKR 5D SKR D AgCuNi (Ag,88 Ni0,) double contact 50 VAC 6 A AC 500 VA app. 50'000 operations 50 VAC 6 A AC (360 operations/h) 5 A für 0 ms 0 ma to 6 A 0,06 VA to 500 VA 0 mω contact life time 8 7 number of operations switching current (A) - AC load cos phi (AC) - 50 VAC 50 Hz 360 operations/h catalog 00 e / 04.03
10 ZKR-PCB socket with accessories ZKR 003 matching to SKR order numbers ZKR 003 general data nominal data max. 0 A 400 V test voltage 000 Veff contact spring material Ms improved fixing soldering pin x M3 creeping resistance CTI 50 weight app. 7 g installation situation any ambient temperature -40 to +85 C number of poles -pole protection standard IP 30 accessories tests, instructions metal clamp ZKR 008 certificates insulation group UL, CSA VDE 00 / group C 50 VAC dimensions drilling plan 0,6 0,6 3,5,0x0,3 37 5,4 38,5,5 /,54,3 5,4 37 7,6 5,08 30,48 38,5 view from solder side catalog 00 e /
11 SKR-screw socket with accessories socket ZVE8 ZKE088 data nominal data 400 VAC 0 A 400 VAC 0 A dimensions (L x B x H) [mm] 57 x 38 x 8,5 75 x 38 x 6 ambient temperature [ C] -40 to to +85 accessories plug-in modules E... time module STM 00 metal clamp ZKR008 ZKR008 ZVE ZKX8 ZKE8 data nominal data 400 VAC 0 A 400 VAC 0 A 400 VAC 0 A dimensions (L x B x H) [mm] 57 x 38 x 8,5 6 x 38 x 6 75 x 38 x 6 ambient temperature [ C] -40 to to to +85 accessories plug-in modules E... time modules STM 00 metal clamp ZKR008 ZKR008 ZKR008 tests, instructions certificates insulation group UL, CSA VDE 00 / group C 50 VAC 4 catalog 00 e / 04.03
![.. time module STM 00 metal clamp ZKR008 ZKR008 ZVE ZKX8 ZKE8 data nominal data 400 VAC 0 A 400 VAC 0 A 400 VAC 0 A dimensions (L x B x H) [mm] 57 x 38 x 8,5 6 x](/docs-images/46/21732206/images/page_11.jpg "38 x 6 75 x 38 x 6 ambient temperature [ C] -40 to +85-40 to +85-40 to +85 accessories plug-in modules E.")
12 time modules STM 00 data compatible to socket function time range rated voltage ZKE088/8 programmable 0,05s - 40h 4-40 VDC/VAC general data time range 8 ranges: s, 0s, m, 0m, h, 0h, d, 0d time adjustment variable, 5% - 00% of the time range time function 8 functions, selectable by DIP switches display green LED for ON-status, blinking at time delay dimensions B x H x T = 35 x 46,7 x 0,3 mm (without clamp) weight app. 4 g permissible ambient temperature -5 to +55 C nominal voltage 4V to 40V AC (-5%...+0%), 4V to 50V DC (-5%...+0%) frequency 48 Hz to 63 Hz max. power consumption 4V AC/DC: 70mW, 40V AC/DC: 700mW min. impulse time (B) AC: 50ms, DC: 30 ms min. pause time (B) AC&DC: 00ms at 5 C, AC&DC: 40ms at 55 C pull-in delay AC: max. 40ms, DC: 0ms reset time delay AC&DC: max. 00ms at 5 C, AC&DC: max. 40ms at 55 C control voltage 4V: min. 80% of supply voltage 30V: min. 95% of supply voltage time delay after power loss max. 0ms start-up time 60ms re-readiness time max. 00ms at 5 C, max. 50ms at 55 C reset at UN 0Veff precision at the scale stops ±0,5% repeatability <0,5% or 5ms (in % from scale value) accuracy in adjustment 5% temperature influence 0,0% / C voltage influence 0,00% / V max. load current 00mA at 5 C plug-in modules E... data compatible to socket ZKE088/8 free wheel diode 6-0 VDC E RC-circuit 0-30 VAC E 5C varistor 6-4 VAC E 7 varistor 6-30 VAC E 8 LED 4-60 VDC/ VAC E 6EV LED 0-30 VDC/ VAC E 9V catalog 00 e /
Elesta Elektrotechnik AG industry relays and accessories
Elesta Elektrotechnik AG industry relays and accessories edition 003 table of contents SKR-industry relay 4 SKR-screw socket with accessories 4 SFR-industry relay 6 SFR-screw socket with accessories 7
RY2 miniature industrial relays
6 RY2 Relays of general application For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting Flat insert connectors - faston x 0,5 mm Recognitions, certifications, directives: RoHS,
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
Reed V23100-V4 Relay. AXICOM Telecom-, Signal and RF Relays. AXICOM Telecom-, Signal and RF Relays. Reed V23100-V4 Relay
AXICOM AXICOM 108-98011 Nov. 07 Rev. C ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not
40 Series - Miniature PCB/Plug-in relays 8-10 - 16 A. Features 40.31 40.51 40.52
Features 40.31 40.51 40.52 1 & 2 Pole relay range 40.31-1 Pole 10 A (3.5 mm pin pitch) 40.51-1 Pole 10 A (5 mm pin pitch) 40.52-2 Pole 8 A (5 mm pin pitch) PCB mount - direct or via PCB socket 35 mm rail
1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and
Model Number Structure
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
Model Number Structure
General-purpose Relay G2RS Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped with
49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
G7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm
Slim Plug-In Safety Relay Slim Safety Relay for Machine Control H Slim body only 13 x 24 x 50 mm (six poles) H Four-pole and six-pole models are available H Terminal arrangement simplifies PCB pattern
LAUBE TECHNOLOGY DRY REED RELAYS
LAUBE TECHNOLOGY DRY REED RELAYS CONTACT FORM CURRENT PART SERIES PAGE #'S (1A) SPST-NO 1 AMP D41A...0L 147~148 (Link) (1A) SPST-NO 1 AMP D71A.1.0 149~150 (Link) (1A) SPST-NO 1 AMP F51A.100 151~152 (Link)
RM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
SILENT POWER RELAY. FTR-H3 Series. 1 POLE - 78A/120A Inrush Current Type FTR-K1 SERIES FEATURES
FTR-K1 SERIES SILENT POWER RELAY 1 POLE - 78A/120A Inrush Current Type FTR-H3 Series FEATURES Pin compatible with widely used VS and FTR-H1 series power relays Silent relay with patented unique U-shape
RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
60 Series - General purpose relays 6-10 A. Features 60.12 60.13
Features 60.12 60.13 Plug-in mount 10 A General purpose relay 2 & 3 pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listing (certain relay/socket combinations)
48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
Type Sealing Poles Contacts Rated voltage Model Standard d Flux-tight 4 poles oes 3PST-NO, SPST-NC 24 VDC G7SA-3A1B 3PST-NO, 3PST-NC
Safety Relay Slim Safety Relays Conforming to EN Standards The forcibly guided contact in the assures safe operation (EN50205 Class A, approved by VDE.) Ideal for use in safety circuits in press machinery,
1 POLE - 16A 80A Inrush type. (a) Relay type FTR-K1 : FTR-K1-Series
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) High insulation Insulation distance (between coil and
PCB Relay. LED indicator G2R-1A3-SN G2R-13-SN --- --- contact) LED indicator and diode DC G2R-1A3-SND G2R-13-SND --- ---
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE045 (VDE approval: C2 insulation grade), UL8, CSA22.2, SEV, SEMKO. Meets VDE0700 requirements for household products
Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules
CHIEF EN TERPRISES INC. M a s t e r I n t e r n a t i o n a l D i s t r i b u t o r Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules M AS TER IN
1 POLE - 8A Medium Load Control
POWER RELAY 1 POLE - 8A Medium Load Control JS Series FEATURES UL class B (130 C) coil wire insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile and space saving - Height: 12.5 mm - Mounting
SPST-NO SPDT DPST-NO DPDT
PCB Relay Next-generation PCB Relay Available in 2 Models Low profile:. mm max. in height Contains no lead inside and features cadmium-free contacts ensuring environment-friendly use. Conforms to VDE0
Control Devices Catalogue. Control Devices. Preferred and Standard Products
Control Devices Catalogue Control Devices Preferred and Standard Products KOP.J Timer Electronic 22.5 mm Characteristics Mounting KOP.J 22.5 mm mono or multifunction high immunity to interference surface
Type Contact material Contact form Construction Model General purpose AgCdO SPDT Semi-sealed G2R-1
Power PCB Relay G2R Creepage distance of 8.0 mm (0.31) min. between coil and contact. Dual-winding latching type available. Plug-in and quick-connect terminals available. High sensitivity (360 mw) and
POWER RELAY. JV Series. 1 POLE - 5A/10A Medium Load Control FTR-K1 SERIES FEATURES
FTR-K1 SERIES POWER RELAY 1 POLE - 5A/10A Medium Load Control JV Series FEATURES UL, CSA, VDE, SEMKO, CQC recognized UL class B (130 C) wire class Low profile and space saving - Height: 12.5 mm - Mounting
The Best Relaytion. Reed Relays. 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04
The Best Relaytion Reed Relays 108-98011 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04 1 and 2 pole relays non-polarized, non-latching Features Direct coil control with TTL-signals possible Highly reliable
Pluggable interface relays CR-P Pcb relays
2CDC 293 034 F0004 1 2 4 3 Features 9 different supply s: DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2 c/o (8 A) Cadmium-free contact
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
Telemecanique Zelio Relay complementary and easy to assemble
Telemecanique Zelio Relay complementary and easy to assemble Get more with the world s Power & Control specialist RS interface relays Compact dimensions, enabling multiplication of contacts in electrical
RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters
Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main
38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
SZR-LY Series. General Purpose Power Relay WARNING WARNING. Sensing and Control
Power Relay FEATURES Small package design ARC barrier equipped Silver Cadium Oxide contact High dielectric strength (,800 Vac) High reliability and long life Ultra-high sensitivity with quick response
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated. Ordering information
Type: DILM115(RAC240) Article No.: 239548 Sales text Contactor,55kW/400V,AC operated Ordering information Connection technique Description Description Rated operational current Screw terminals 3 pole AC
4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES
4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS FEATURES 28. 1.12 12..472 1.4.49 The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High
Modular I/O System Analog and Digital Interface Modules
OPERATING INSTRUCTIONS Modular I/O System Analog and Digital Interface Modules Installation Operation Maintenance Document Information Document ID Title: Operating Instructions Modular I/O System Part
FP2 Relay. The Best Relaytion
The Best Relaytion 2 pole telecom / signal relay Through Hole Type (THT) Polarized. Relay types: non-latching with1 coil latching with 1 coil latching with 2 coils Features Telecom / signal relay (dry
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in
Inductive Sensors Single or Dual Loop Detectors Type LD with teach-in Single or Dual loop detector Automatically adjustment of detection level Manual sensitivity for compensations of variations Easy installation
HERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
TQ SMD RELAYS TQ SMD LOW-PROFILE SURFACE-MOUNT RELAY FEATURES SPECIFICATIONS
LOW-PROFILE SURFACE-MOUNT RELAY RELAYS.55 5.6. FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6.5 mm.56 inch) Tape and reel package is available as standard packing style Surge withstand between
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
CQM1-SF200/CS1W-SF200
Safety Relay Unit ( I/O Unit Type) CQM1-SF200/CS1W-SF200 CSM_CQM1-SF200_CS1W-SF200_DS_E_2_1 A Safety Relay Unit That Functions as a I/O Unit. Less Installation Space and Wiring Required. Safety Relay Unit
1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C
FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between
Safety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
Thermal-Magnetic Circuit Breaker 3120-...-M1-..
Thermal-Magnetic Circuit Breaker -...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic tripping
Product Catalogue. Relays with forcibly guided contacts
Product Catalogue Relays with forcibly guided contacts Product Catalogue - Relays with forcibly guided contacts Edition / Publisher: ELESTA relays GmbH, Bad Ragaz, Switzerland All rights reserved. This
POWER RELAY. FTR-K1-KS Series. 1 POLE - 16A / Inrush 120A relay FTR-K1 SERIES FEATURES
POWER RELAY POLE - 6A / Inrush 20A relay FTR-K-KS Series FTR-K SERIES FEATURES pole 6A, form A or form C Peak inrush current 20A / TV-8 Coil power 400mW High insulation in small package (between coil and
Type: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
Preset Counter signo 721
Most simple handling Impressive, clearly readable display in 48x48 mm Input frequency up to 60 khz Easy installation due to pluggable terminals TECHNICAL DATA GENERAL Display Height of digits Supply voltage
General Purpose Relays Accessories. Accessories Miniature Relay PT
Miniature Relay PT n Easy replacement of relays on a densely packed DIN rail n No reduction of protection class or creepage/clearance with plastic retainer n Plug-in indicator- and protection modules n
2 POLES - 5A LOW PROFILE TYPE
FTR-K1 SERIES POWER RELAY 2 POLES - 5A LOW PROFILE TYPE FTR-F1 Series FEATURES Low profile (height: 16.5mm) DPST/DPDT 5A, TV-3 rating available High insulation (due to its reinforced insulation construction)
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
1a/1c 5A/10A small power relays
VDE a/c A/A small power relays RELAYS RoHS compliant FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw (c) High surge voltage:, V between
Data Sheet. Electro-mechanical counters Hengstler 800 series
Data Pack D Issued March 00 504897 Data Sheet Electro-mechanical counters Hengstler 800 series The 800 series totalising and predetermining batch counters, manufactured by Hengstler, is available from
Goodsky Technical Data. Contact Details
Goodsky Technical Data The following page(s) are extracted from multi-page Goodsky product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
E-STOP relays, safety gate monitors
Unit features Safety features gang engertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
1 pole, 16 A Screw terminal connection 35 mm rail (EN 60715) mounting. 2 pole, 8 A Screw terminal connection 35 mm rail (EN 60715) mounting
Series - Relay interface modules 8-10 - 16 A Features.01.02 1 & 2 pole relay interface modules, screw terminal socket, mm wide. Ideal interface for PL and electronic systems.01-1 Pole 16 A.02-2 Pole 8
General-purpose Relay
General-purpose Relay An Improved Miniature Power Relay with Many Models for Sequence Control and Power Applications A wide range of relay variations including ones with operation indicators, high-capacity
Circuit Breakers. NRC Series. NRC Series. 900 www.idec.com
Switches & Pilot Lights Display Lights NRC series circuit breakers offer circuit protection which is far superior to using fuses in applications containing relay circuits, motor circuits, heater circuits,
Type: DILM9 10(24VDC) Article No.: 276705
Type: DILM9 10(24VDC) Article No.: 276705 Ordering information Rated operational current AC 3 400 V I e A 9 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors, 50
Solid-State Timer H3G
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-11000(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid-State Timer Low-Cost, Plug-In
SPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay for a Variety of Purposes with Various Models Conforms to VDE (EN680-), UL08, CSA22.2. Meets EN6033- requirements for household products. Clearance and creepage distance: 8 mm/8
O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications
Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection
(e) Enclosure B : Flux proof type, RTII C : Plastic sealed type (with tape), RTIII K : Plastic sealed type, RTIII
Non-promotional not for new designs FTR-K1 SERIES POWER RELAY 1 POLE - 10A VS Series FEATURES UL, CSA, VDE, SEV, SEMKO, CQC recognized TV-5 is available Working class: C UL class B (130 C) coil wire insulation
Power Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
Safety automation solutions
Operating principle, characteristics Preventa safety s types XPS AV,, For and switch monitoring Operating principle Safety s XPS AV, and are used for monitoring circuits conforming to standards EN/ISO
SERIES 1800 - SINGLE POLE AND DOUBLE POLE ROCKER SWITCHES UP TO 12 (4) A 250 V~ AND 8 (8) A 250 V~
SERIES 1800 - SINGLE POLE AND DOUBLE POLE ROCKER SWITCHES UP TO 12 (4) A 250 V~ AND 8 (8) A 250 V~ PRODUCT ADVANTAGES Switching principle with long life endurance due to a low friction contact system (ball),
Description Part-No. Type PU. Nominal voltage DC12V 768001 Relais-SNR 12V 1W 20 DC 24 V 768002 Relais-SNR 24V 1W 20
Replacement relay, 1COcontact, 6 A, : AgSnO 2,AgSnO 2 +5 µm HV Relay with AgSnO 2 Nominal voltage DC12V 768001 Relais-SNR 12V 1W 20 768002 Relais-SNR 24V 1W 20 DC 60 V 768003 Relais-SNR 60V 1W 20 Relay
34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51
34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in
Speed Control Relays SX2
SX2 File 850 CONENS Description.....................................................Page General Information................................................ 2-3 SX2DV General Information...........................................
Series 427. 1/16 DIN Multi-Mode Bar Graph Display Timer TIMERS PRODUCT HIGHLIGHTS
Series 427 1/16 DIN Multi-Mode Bar Graph Display Timer PRODUCT HIGHLIGHTS Digital Setting with 0.1% Accuracy Unique LED Bargraph Indicates Time Cycle in 20% Increments 8 Field Selectable Modes of Operation
RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER
Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.
Reference. 910 402 230 V, 50 Hz A10 415 120 V,60 Hz. 916 402 230 V, 50/60 Hz A16 418 120 V, 50/60 Hz. 910 103 230 V, 50 Hz A10 104 120 V, 60 Hz
Rex - analog time switches MicroRex - 3 modules for DIN rail mounting Rex - analog time switches MicroRex - module for DIN rail mounting 926 428 A0 4 MicroRex T3 24 hour program, synchronous motor 92 429
VAQ. Built-in V-series Miniature Basic Switch for Compatibility with Business and Consumer Equipment. Pushbutton Switch (Cylindrical 10.5-dia.
Pushbutton Switch (Cylindrical 10.5-dia.) CSM DS_E_4_4 Built-in V-series Miniature Basic Switch for Compatibility with Business and Consumer Equipment Momentary operation and lock. available in six colors.
DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
PNOZsigma - Base units
PNOZsigma - Base units Register Login Sensors Control and Communication Electronic monitoring relays Safety Relays PNOZ X PNOZsigma PNOZelog PNOZmulti PNOZpower Configurable control systems Programmable
ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.
1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
Relays. Relays. RH Series. RH Series General Purpose Midget Relays. Specifications
RH Series RH Series General Purpose Midget Key features of the RH series include: Compact midget size saves space High switching capacity (A) Choice of blade or PCB style terminals Relay options include
PCB transformers. Short circuit proof PCB transformer VB. General Data. Advantages. Applications. Circuit diagram. Standards & 1 Certifications W v
Short circuit PCB transformer General Data Rated input 230 Vac Rated output 6-2 x 24 Vac Rated power 0.35-3.2 VA Insulation class B Maximum ambient temperature 70 C Efficiency up to 58 % Degree of protection
1 POLE - 5A SLIM POWER RELAY
POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw
DATA SHEET COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE
DATA SHEET MINIATURE SIGNAL RELAY EC SERIES COMPACT AND LIGHTWEIGHT, SMALL MOUNTING SIZE, HIGH BREAKDOWN VOLTAGE DESCRIPTI The EC series has reduced mounting space but sustained high-performance of NEC
Ordering Information. Latching Relay G2AK. Model Number Legend G2AK-@@@@@ 1 2 3 4 5. Magnetic Latching Version of G2A Ideal for Sequence Control
Latching Relay CSM DS_E_4_1 Magnetic Latching Version of G2A Ideal for Sequence Control Double-winding latch system with continuous rating. Terminals pulled from the respective junctions between the built-in
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection
Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!
Actuator-Sensor-Interface
Selection and ordering data Design Order No. Price Pack 3RX9 307-0AA00 3RX9 307-1AA00 4FD5 213-0AA10-1A 3RX9 305-1AA00 3RX9 306-1AA00 Single output IP 65 current 2.4 A Rated input voltage DC 24 V current
NA Series. 2 POLES - 1 to 2 A (For Signal Switching) MINIATURE RELAY FTR-K1 SERIES
FTR-K1 SERIES MINIATURE RELAY 2 POLES - 1 to 2 A (For Signal Switching) NA Series FEATURES Slim type relay for high density mounting Conforms to Telcordia specification and FCC Part 68 - Dielectric strength
Capacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
HV reed relays K-551H, K-552H K-553H, K-554H, K-555H, K-556H form A contact (normally open) for PCBs
50-5 Wrocław, ul. Krakowska 6, Poland tel. (+8) 7/-65-5, fax (+8) 7/-58-59 HV reed relays K-55H, K-55H K-55H, K-55H, K-555H, K-556H K-55H K-55H K-55H K-55H K-555H K-556H.CONTACT 0 Breakdown voltage min
Type: DILM50(230V50HZ,240V60HZ) Article No.: 277830
Type: DILM50(230V50HZ,240V60HZ) Article No.: 277830 Ordering information Rated operational current AC 3 400 V I e A 50 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase
Number of poles 1-pole 2-pole Minimum Enclosure Contact. G2R-1AZ G2R-1Z DC Fully sealed G2R-1AZ4 G2R-1Z4 G2R-1A-E G2R-1-E
PCB Power elay The Best Seller eneral purpose power elays of single-pole0 A and double-pole A. Safety-oriented design with dielectric strength of,000 V between coil and contacts, and surge resistance of
V REG.-Nr. 115719, Z E135149 Technical data 2-pole 4-pole Rated current 12 A 6 A SCHRACK. Accessories Miniature Relay PT. General Purpose Relays
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules
Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
Contact expansion modules
Gertebild ][Bildunterschrift Kontakterweiterungen Contact for increasing the number of available contacts Approvals Zulassungen Unit features Gertemerkmale Positive-guided relay outputs: 4 safety contacts