BRIEF INFORMATION L 5570 Bi-LED Module nd generation PRODUCT FEATURES A low beam and high beam are combined in the nd generation Bi-LED Module, an impressive product due to its sophisticated lighting /electronics. The non-patterned 55 x 70 mm polycarbonate lens projects the light from the reflector systematically in the required direction. The module has a hardened plastic cover lens, has no moving parts and is passively cooled. It comes with an FEP or and as an ECE or SAE version. The product has an integrated function output for the failure monitor. Product is licensed according to the ECE guideline. Product is licensed according to the SAE guideline. Electromagnetic compatibility (EMC) tested and EU type approval issued. Product electronics are developed using the latest methods and according to the ISO 66 safety guidelines. LED current regulation by means of active electronics Even if the connecting cable is connected the wrong way round, there is still no danger for the electronics. Dust-proof and protected against water during pressure / steam cleaning.
TECHNICAL DETAILS Technical Specifications Dimensional sketch Multivolt 9 V Functions Bi-LED (low beam and high beam) Connection Integrated, -pin or integrated, -pin, 85 Operating voltage Specification* HELLA standard 670. Car Premium /. Caravan Premium /. Bus / 6. Truck Type approval ECE SAE ECE-R S0 SAE J566, FMVSS08 ECE-R S0 SAE J566, FMVSS08 0 79, 0 * A A fuse from HELLA must be used for all LED headlamps. A fuse of > A is not sufficient to safely interrupt the power supply in the event of a fault. If the degree of protection is unknown, an external safety switch (e.g. 8JD 7 557-0) must also always be used. If water gets in, incorrect protection can lead to damage ranging from melting to burning of the product. 0 0 min. installation space required to allow for ventilation 0 Ø0 0 Pin assignment Pin Pin Pin Ground Pin Function For version see overview of range OVERVIEW OF BI-MODULES Halogen Xenon LED Pin Pin Pin Ground Pin Function
DESCRIPTION OF "FUNCTION OUTPUT" According to ECE-R8 series 05 section 6..8, malfunction monitoring of LED headlamps is mandatory. Faults must be displayed so they are recognisable by the driver. According to the following ECE-R8 series 06, fault detection can be omitted but only if all LEDs in one module are connected in series and go out at the same time if a fault occurs. The HELLA LED L 5570 Modules make use of this exception. This is why malfunction monitoring is not required for this module if the vehicle has been homologised according to the new series 06. If the vehicle has been homologised further according to the old ECE-R8 series 05, the vehicle electronics can perform the malfunction monitoring by making corresponding current measurements. Vehicle electronics that are unable to carry out this kind of current measurement can carry out the monitoring via the integrated function output of the HELLA module. Function of the function monitoring output: Active lighting function Malfunction Function monitoring output signal* Active lighting function during a fault Not available High Available Not available High high beam remains active low beam No lighting function Not available High high beam remains active low beam No lighting function High Signal > Uin- V (Example: Uin = 8 V, High Signal > 6 V) Signal < V
Legend, isolux diagram ( - 50 lux) Note: Bi-light distributions are generated when the low beams are switched on and are only available as a bi-version. Remarks Installation height of headlamps: 0.65 m Distance between headlamps:.0 m COMPARISON OF LED BI-MODULES Road simulation Road simulation colour Road simulation Road simulation colour L 5570 nd generation (bi-module) (0 758) L 70 Bi-LED st generation (00 80) L 5570 nd generation (bi-module) (0 758) L 70 bi-led st generation (00 80)
OVERVIEW OF RANGE Product Image Description Bi-LED low beam and high beam L 5570 with Modular headlight with 55 x 70 mm polycarbonate lens and sturdy die-cast aluminum housing Version Part number ES version AL 0 758-00 LES version LL 0 758-0 SAE version AL 0 758-0 ES version AL 0 758-0 LES version LL 0 758- SAE version AL 0 758- ES version AMP connector AL 00 80-0 LES version AMP connector LL 00 80-0 (nd generation) Bi-LED low beam and high beam L 5570 with DEUTSCH connector Modular headlight with 55 x 70 mm polycarbonate lens and sturdy die-cast aluminum housing (nd generation) Bi-LED low beam and high beam L 5570 with AMP connector Modular headlight with 55 x 70 mm polycarbonate lens and sturdy die-cast aluminum housing (st generation) 90 mm configuration tool: www.hella.com/90mm-modules This tool shows you the options for installing 90 mm LED modules as original equipment in a vehicle. To help you make the right choice for your application, take a look at the pictures showing Europe's biggest light testing facility and compare the light distribution of halogen and LED modules.
ACCESSORIES Part number Characteristics 9AH 69 580-0 9AH 85 978-0 9AH 05 65-0 9AH 05 65-9AH 8-00 9AH 05 65-00 8JA 76 8-0 8KW 7 87-00 9GD 76 85-00 0 pcs. 8JA 0-00 8KW 86 9-0 9GD 86 95-0 9GD 86 95-0 9GD 86 95-00 0 pcs. Connector housing 8JA 0 0-0 Lock/wedgelock 9NB 0 0-0 Contact sleeve 0.5 -.5 mm 8KW 0 05- Dummy plug 9NB 0 06-0 Set packaging 8JA 0 0-8 0 pcs. (** pc. in set) 0 pcs. (** pc. in set) (**5 pcs. in set) (** pcs. in set) Number, see ** 00 80-00 / -0 Accessory components L 70 Bi-LED low beam and high beam 00 80-0 / -0 Legend ) Accessory for proper connection, or mandatory accessory ) Optional accessories Bi-LED low beam and high beam 0 758-0 / - / - Bi-LED low beam and high beam 0 758-00 / -0 / -0 L 5570 Carrier frame Premium carrier frame Performance carrier frame for agricultural and truck applications Premium carrier frame Performance carrier frame Adapter for : exchange from 009 999 bi-halogen modules to bi-led Adapter for : exchange from bi-led to 009 999 bi-halogen modules Surplus supply LED: AMP SUPERSEAL connector, -pin Housing Socket connector Strand insulation Surplus supply LED: FEP -pin connector Housing Flat contact Strand sealing 0.5-0.5 mm or Strand sealing 0.75 mm Dummy plug Surplus supply LED: DEUTSCH -pin connector Illumination range adjustment systems Headlamp leveling system, V Headlamp leveling system, V Bracket for right-side mounting of actuator Bracket for left-side mounting of actuator Mounting set for headlamp leveling actuators (bracket and articulated element) Left bracket/interface for headlamp leveling actuator for connecting to the module Right bracket/interface for headlamp leveling actuator for connecting to the module 6NM 007 8-6NM 008 99-50 8HG 8 69-007 8HG 8 60-007 8HG 8 586-00 8HG 08 79-0 8HG 08 79-00 Other accessories (only if the vehicle was registered i.a.w. ECE-R8, series 05. As of ECE-R8, series 06, no more mandatory accessories) Function monitoring device, V Function monitoring device, V 5DS 0 60-00 5DS 0 60-0 pc. pc. HELLA KGaA Hueck & Co., Lippstadt J000/0.6 Subject to technical and price modifications.