BAAN IVc4 BAAN IV Istallatio Maual for Oracle7 ad Oracle8 o Widows NT
A publicatio of: Baa Developmet B.V. P.O.Box 143 3770 AC Bareveld The Netherlads Prited i the Netherlads Baa Developmet B.V. 1999. All rights reserved. The iformatio i this documet is subject to chage without otice. No part of this documet may be reproduced, stored or trasmitted i ay form or by ay meas, electroic or mechaical, for ay purpose, without the express writte permissio of Baa Developmet B.V. Baa Developmet B.V. assumes o liability for ay damages icurred, directly or idirectly, from ay errors, omissios or discrepacies betwee the software ad the iformatio cotaied i this documet. Documet Iformatio Code: U7051E US Group: User Documetatio Editio: E Date: February 1999
Table of cotets 1 To istall Oracle7 ad Oracle8 1-1 Hardware ad software requiremets 1-1 To istall the Oracle7 software 1-1 To istall the Oracle8 software 1-6 2 To istall BAAN IV for Oracle7 ad Oracle8 2-1 Hardware ad software requiremets 2-1 Level II default settig 2-2 Addig the Widows NT user baa 2-2 To istall BAAN IV 2-3 To istall the demo tables 2-16 To create tables for the demo models 2-17 To import the demo models 2-18 To iitiale parameters 2-20 To validate the system 2-21 To istall ad cofigure BAAN IV services 2-28 To cofigure BaaLicesig service 2-28 To cofigure BaaLogicService 2-29 To set up shared memory 2-31 To cofigure BaaSharedMemory 2-34 To set up the Eterprise Modeler 2-36 To set up the priter settigs 2-36 To defie the ru-time resource settigs 2-36 To uistall BAAN IV software 2-38 3 Appedix A - Oracle i a Widows NT eviromet 3-1 Setup issues to cosider with Oracle o Widows NT 3-1 Multiple threads 3-1 Utilities 3-2 To tue NT 4.0 for a dedicated Oracle server 3-3 Additioal tuig suggestios 3-3 To moitor idividual threads through WINDOWS NT performace moitor 3-4 Useful performace moitor couters 3-4 Hard disk/logical disk couters 3-4 Oracle specific couters 3-5 Performace moitor setup otes 3-5 i
Table of cotets ii
About this documet This guide describes how to istall ad cofigure BAAN IVc4 o a Microsoft Widows NT platform ruig Oracle7 ad Oracle8. It also describes how to istall ad customize both the Oracle7 ad Oracle8 database maagemet systems for BAAN IV. The guide is iteded for BAAN IV istallers ad system admiistrators. The reader is assumed to be familiar with Microsoft Widows NT s system admiistratio. The guide is divided ito 2 chapters ad oe appedix: Chapter 1 describes the prerequisites for a Oracle7 ad Oracle8 istallatio ad lists the activities that must be performed to istall the Oracle7 ad Oracle8 software. Chapter 2 describes how to istall the BAAN IV software. Appedix A describes Oracle7 ad Oracle8 issues withi a Widows NT eviromet. iii
About this documet iv
1 To istall Oracle7 ad Oracle8 This chapter describes how to istall ad cofigure the Oracle7 ad Oracle8 software. The followig topics are covered for each versio: Hardware ad software requiremets Istallig the Oracle7 software Istallig the Oracle8 software Hardware ad software requiremets This sectio assumes that you are familiar with Oracle7 or Oracle8 server ad Widows NT. I additio, it is recommeded that you use the iformatio cotaied i this sectio i cojuctio with the Oracle7 Server, Gettig Started for Widows NT or Oracle8 Server, Gettig Started for Widows NT maual. BAAN recommeds the miimum hardware ad software requiremets for Oracle7 or Oracle8 server ad Widows NT as follows: A Itel 80486 system 64 MB RAM, 64 MB pagig file Network iterface card Widows NT Server 4.0 (Service Pack 3 or higher) TCP/IP A destiatio istallatio drive cotaiig the Widows NT file system (NTFS). (It caot be a drive o a etwork) At least 150 MB of free disk space (icludig a miimum of 100 MB for the system tablespace) NOTE To istall the Oracle7 software This sectio describes how to istall ad cofigure the Oracle7 software. The BAAN IVc4 software requires Oracle7 versio 7.3.3 or higher. To istall the Oracle7 software, complete the followig steps: 1 Log o as a user with admiistrator rights. 2 Isert the Oracle distributio CD-ROM. The system displays a iitial scree. 1-1
To istall Oracle7 ad Oracle8 3 Click Yes. 4 Select the desired laguage ad click OK. Figure 1, Laguage 5 Eter your compay ame, select the target drive, ad click OK. Figure 2, Oracle Istallatio Settigs NOTE You ca click the butto to the right of the Oracle Home text box to select a istallatio directory other tha the default. If this is a first-time istallatio, a message is displayed warig you that the PATH variable will be updated. Click Yes for the istaller to perform the update ow. 1-2
To istall Oracle7 ad Oracle8 6 Select Custom Istallatio ad click OK. Figure 3, Custom Istallatio 7 Select +(All Products) ad click Istall. Figure 4, Software Asset Maager 1-3
To istall Oracle7 ad Oracle8 8 Select the followig optios: Oracle Call Iterface 7.3.4.0.0 Oracle Eterprise Maager 1.3.6.0.1 Oracle Eterprise Maager DB Admi Applicatios 1.3.6.0.1 Oracle Networkig Products Oracle7 Server 7.3.4.0.0 Oracle7 Server Optios 7.3.4.0.0 Oracle7 Server Release Notes 7.3.4.0.0 Oracle7 Utilities 7.3.4.0.0 Required Support Files 7.3.4.0.0 Figure 5, All Products 9 Click OK. 1-4
To istall Oracle7 ad Oracle8 10 Leave all server optios uselected ad click OK. Figure 6, Server Optios The Starter Database Istallatio Optios scree appears, askig you which type of starter database you wat to istall. 11 Select Noe ad click OK. The BAAN istaller will (optioally) create a ew istace. However, the istaller wars you that you will ot create a istace. 12 Click OK to cotiue. The system displays the followig alert. Figure 7, Istallatio Completed 13 Click Exit, followed by Yes at the ext scree. This completes the Oracle7 istallatio. 1-5
To istall Oracle7 ad Oracle8 To istall the Oracle8 software This sectio describes how to istall ad cofigure the Oracle8 software. To istall the Oracle8 software, complete the followig steps: 1 Log o as a user with admiistrator rights. 2 Isert the Oracle distributio CD-ROM. The system displays the iitial scree. 3 Select Begi Istallatio. Figure 8, Autoru 1-6
To istall Oracle7 ad Oracle8 4 Eter the appropriate iformatio ad click OK. Figure 9, Istallatio Settigs 5 Select Custom Istallatio ad click OK. Figure 10, Istallatio Optios 1-7
To istall Oracle7 ad Oracle8 6 Select +(All Products) ad click Istall. Figure 11, Software Asset Maager 1-8
To istall Oracle7 ad Oracle8 7 Select the followig optios: Oracle Call Iterface 8.0.4.0.0 Oracle Eterprise Maager 1.5.0.0.0 Oracle Eterprise Maager DB Admi Applicatios 1.5.0.0.0 Oracle Net8 Products 8.0.4.0.0 Oracle8 Eterprise Editio 8.0.4.0.0 Oracle8 Eterprise Editio Release Notes 8.0.4.0.0 Oracle8 Utilities 8.0.4.0.0 Required Support Files 8.0.4.0.0 Figure 12, All Products 8 Click OK. 1-9
To istall Oracle7 ad Oracle8 9 Click OK at the Oracle8 JDBC Drivers dialog box. Figure 13, JDBC Drivers 10 Select Noe ad click OK. Figure 14, Starter Database Cofiguratio 1-10
To istall Oracle7 ad Oracle8 11 Click No to declie istallatio of the media maagemet layer. Figure 15, Legato Storage Maager 12 Click OK to complete the istallatio. Figure 16, Istallatio Completed 13 Click Exit, ad the Yes. This completes the Oracle8 istallatio. 1-11
To istall Oracle7 ad Oracle8 1-12
2 To istall BAAN IV for Oracle7 ad Oracle8 This chapter describes the hardware ad software requiremets for istallig BAAN IV for Oracle7 ad Oracle8 i the Widows NT eviromet. The followig topics are covered: Hardware ad software requiremets Level II default settig Addig the Widows NT user baa Istallig BAAN IV Istallig the demo tables Creatig tables for the demo models Importig the demo models Iitializig parameters Validatig the system Istallig ad cofigurig BAAN services Settig up shared memory Settig up the Eterprise Modeler Uistallig the BAAN IV software Hardware ad software requiremets Because the BAAN IV services are started durig the istallatio of BAAN IV BackOffice, a etwork iterface card must be istalled i your system before you istall the BAAN IV software. Although the etwork iterface card eed ot be coected to the etwork, the BAAN IV etwork-related services do ot start if the etwork iterface card is ot detected. Although BAAN IV ca be istalled o both a NTFS ad a FAT file system, it is strogly recommeded that you istall the BAAN IV software o a NTFS file system. The NTFS file system allows you to format a disk with 1 KB allocatio uits (or eve 512 bytes), resultig i a ecoomic usage of the disk space. Use 1 KB allocatio uits. If you use a drive formatted as a FAT file system, the allocatio uits are specified as 32 KB, because FAT caot hadle the umber of allocatio uits eeded to reduce the size to 16 KB or less. This meas that each file cosumes at least 32 KB, resultig i a waste of disk space. If you use a FAT file system, you risk fillig the disk quickly. 2-1
To istall BAAN IV for Oracle7 ad Oracle8 The hardware ad software requiremets for the istallatio of BAAN IV for Oracle7 ad Oracle8 i the Widows NT eviromet are as follows: Widows NT Server 4.0 (Service Pack 3 or higher) operatig system must be istalled ad ruig. The Oracle7 (versio 7.3.3 or higher) or Oracle8 (versio 8.0.4 or higher) database maagemet system i the Widows NT eviromet must be istalled. The BAAN database server must cotai 2 GB of free disk space to accommodate the dbspace for BAAN: a fully-loaded database eeds 1500 MB for the tables. Although 1 GB is eough for the iitial istallatio, this leaves little additioal space for ew data, such as ew data created durig testig. The BAAN applicatio server must cotai 600 MB of free disk space to accommodate the BAAN software (icludig demo compaies). BAAN requires at least 8 MB of RAM mai memory per user. The etwork software must be istalled ad ruig. Level II default settig By default, the BAAN Oracle driver rus i Level 2 mode. If you choose to use Level 1 mode, the you must set the eviromet variable ORA_LEVEL1 to 1 before ruig the istallatio. If you choose to remove the eviromet variable after the istallatio, you ca set this variable i the %BSE%\lib\defaults\db_resource file (as ora_level1:1). This will affect all the users. The level mode of the Oracle driver is treated as Level 1 mode. Addig the Widows NT user baa NOTE To add the Widows NT user baa, complete the followig steps: 1 Log o as a user with admiistrator rights. You must log o to the local server. 2 Choose Start, Programs, Admiistrative Tools (Commo), User Maager for Domais. 2-2
To istall BAAN IV for Oracle7 ad Oracle8 3 Choose New User o the User meu ad add the user baa. NOTE The user baa must iitially be created with password baa. After successfully creatig the istallatio, you ca chage this password. 4 Make user baa member of the Users ad Admiistrators groups by clickig the Groups butto. 5 Log o as user baa. NOTE NOTE To istall BAAN IV To istall BAAN IV, complete the followig steps: Multiple BAAN istallatios or eviromets per Widows NT system are supported i this release. The Widows NT user baa must have the password baa durig the BAAN istallatio procedure. Oce you have completed the BAAN istallatio, chage the password of user baa to prevet security problems. You must chage the password for user baa by usig the BAAN DBA Module (ttdba0115m000) sessio. Do ot chage the password if you use the Widows NT User Maager for Domais. 1 Log o as user baa. 2 Close all ruig applicatios. 3 Isert the BAAN distributio CD-ROM. The system automatically displays the Welcome scree. If you eed to perform a maual lauch of the BAAN istallatio program, perform the followig: O a Itel platform, choose setup.exe i the I386 subdirectory of the BAAN istallatio CD-ROM. O a DEC Alpha platform, choose setup.exe i the Alpha subdirectory of the BAAN istallatio CD-ROM. 4 Click Next. The system displays the Software Licese Agreemet scree. 5 Click Yes to accept the licese agreemet. The system displays the Select Eviromet scree. 2-3
To istall BAAN IV for Oracle7 ad Oracle8 6 Select Istall New Eviromet, eter Baa4, ad click Next. Figure 17, Select eviromet 2-4
To istall BAAN IV for Oracle7 ad Oracle8 7 Choose a destiatio directory ad click Next. NOTE You ca accept the default path or eter aother path (ot a root directory) by clickig the Browse butto. If the target directory does ot exist, you are asked if you wat to create it. Do ot eter a etwork drive as the target locatio of the BAAN IV files. The BAAN IV services will ot ru from a etwork drive. Figure 18, Choose Destiatio Locatio 2-5
To istall BAAN IV for Oracle7 ad Oracle8 8 Select Full as the setup type ad click Next. Figure 19, Setup Type You ca select oe of the followig optios for your setup: User Iterface: A BAAN IV Widows NT or Widows 95 cliet. User Iterface ad Logic: A BAAN IV cliet that cotais both the user iterface ad applicatio logic. This must be a Widows NT cliet. Full istallatio (icludig applicatio files ad database): The complete BAAN IV Widows NT server versio. 9 For a full server istallatio, select the third optio, Full Istallatio, ad click Next to defie your database for the istallatio. 2-6
To istall BAAN IV for Oracle7 ad Oracle8 10 The Select Database to use dialog box is displayed. Figure 20, Select Database to use 11 Select Oracle 7.3/8.0.4, ad click Next to defie your BAAN group ame ad BAAN password. 2-7
To istall BAAN IV for Oracle7 ad Oracle8 12 Eter the password iformatio of user baa ad click Next. Figure 21, Baa user password 2-8
To istall BAAN IV for Oracle7 ad Oracle8 13 The BAAN Group ad BAAN Password dialog box is displayed. Figure 22, Logi Iformatio Eter the followig iformatio: Group Name: Eter the Group ame for the BAAN applicatio. For example, baadb. Password: Eter the password for this BAAN group (you are asked to retype the password). 2-9
To istall BAAN IV for Oracle7 ad Oracle8 14 Click Next to cotiue. The Select Oracle Istace scree is displayed as follows: Figure 23, Select Oracle Istace 15 Select the Create a ew Oracle Istace optio ad supply the ame for the Oracle istace for the BAAN database (i this example, the istace is called BAAN). Note that the ame for the istace ca be four characters at maximum. 16 Click Next to cotiue. The Eter Oracle Istace password scree is displayed. Eter ad reeter the password for the ew istaces ad click Next to cotiue. 2-10
To istall BAAN IV for Oracle7 ad Oracle8 17 The Please Eter ew Oracle istace parameters scree is displayed. Figure 24, Oracle istace parameters I this example istallatio, the Large Cofiguratio optio is selected. Click Browse to select the locatio for the system datafile, the redo logs, the rollback ad the temporary tablespace directories. It is recommeded that you locate the Oracle data files o differet drives tha the Oracle software eviromet (defied by the ORACLE_HOME variable). The default sizes are sufficiet for a average istallatio. 2-11
To istall BAAN IV for Oracle7 ad Oracle8 18 Click Next to cotiue. The Optios scree is displayed. Figure 25, Optios I this example istallatio, you caot access the Tablespace Optios area, because you are ot usig a existig istace for the BAAN database. If you wat to make archive loggig available, select the Use Archive Log Mode check box. Either type the directory locatio, or click Browse to choose the archive directory. If you click Browse, the istallatio program displays a dialog box i which you ca browse the directory structure ad select your archive directory. If you leave the dialog area blak, the istaller wars you that if you wat archive loggig, you must specify a archive directory. If you use the archive log mode, the istallatio program edits your parameter file by addig the followig two parameters: LOG_ARCHIVE_START=TRUE LOG_ARCHIVE_DEST=path to archive log directory If you do ot make the archive log mode available, the istallatio program adds the followig lie: LOG_ARCHIVE_START=FALSE 2-12
To istall BAAN IV for Oracle7 ad Oracle8 19 Click Next. The Data tablespace dialog box is displayed. Figure 26, Data tablespace Eter the followig data i the Data tablespace dialog box: Tablespace ame: I this example BAANDB is the ame of the tablespace. Specify the locatio ad ame of the datafile: I this example, the ame ad locatio of the data file is D:\ORANT\DATABSE\BAANDB.DBF. Click Browse to isert a alterate path for the tablespace. Size i Megabytes: The miimum recommeded tablespace size is 2000 MB. 2-13
To istall BAAN IV for Oracle7 ad Oracle8 20 Click Next. The Idex tablespace dialog box is displayed. Figure 27, Idex tablespace Eter the followig data: Tablespace ame: I this example, BAANDIDX is the ame of the tablespace. Specify the locatio ad ame of the datafile: I this example the ame ad locatio of the data file is E:\ORANT\DATABSE\BAANDBIDX.DBF. Click Browse to isert a alterate path for the tablespace. Size i Megabytes: The miimum recommeded tablespace size is 2000 MB. 2-14
To istall BAAN IV for Oracle7 ad Oracle8 21 Click Next. The Select Program Folder dialog box is displayed. Figure 28, Select Program Folder 22 Supply a program folder (or select a existig oe) ad click Next to cotiue. The Check Setup Iformatio dialog box is displayed. 23 Click Next to cotiue. The istallatio program starts iitializig the database. 2-15
To istall BAAN IV for Oracle7 ad Oracle8 To istall the demo tables To istall the demo tables for compaies 550 ad 750, complete the followig steps: 1 Log o as user baa. 2 Start BAAN IV. 3 Select BAAN IV Tools, Software Istallatio, Miscellaeous from the mai widow. 4 Select Istall Demo Tables (ttiex1290m000) ad isert the appropriate demo compay umbers i the From ad To fields. Figure 29, Istall Demo Tables 5 Choose Special, click Cotiue. 6 Repeat steps 4 ad 5 for additioal compaies. 2-16
To istall BAAN IV for Oracle7 ad Oracle8 To create tables for the demo models To create tables for the demo models, complete the followig steps (i this example, the tables for compay 550 are created). 1 Log o as user baa. 2 Start BAAN IV Meu Browser. 3 Select File, Ru Program. 4 Type ttaad4230m000 i the Program/Sessio field ad click OK. 5 Isert the demo compay umber 550 i the From ad To fields. 6 Choose Special, click Cotiue. Figure 30, Create Tables 7 Click OK. 8 Repeat steps 5 through 7 for additioal compaies. 2-17
To istall BAAN IV for Oracle7 ad Oracle8 To import the demo models Durig the istallatio of BAAN IV, several dumps of demo models are copied to disk. The table below shows the istalled dumps. Type of Compay Path to dump compay umber Stadard c Compay 550 %BSE%\test\tgB40_c4\550\550\tg550.imp Stadard c Compay 750 %BSE%\test\tgB40_c4\750\750\tg750.imp To import the demo models, complete the followig steps (i this example, the demo models for compay 550 are imported). 1 Log o as user baa ad start BAAN IV. 2 From the Meu browser widow choose Optios, Chage Compay to chage to compay 550. 3 Choose File, Ru Program i the Meu Browser. 4 Type tgbrg1245m000 i the Program/Sessio field ad click OK. 5 Type the path to the relevat dump for the demo models. Figure 31, Import Versio Dump You must accept the default settigs o the other forms. 2-18
To istall BAAN IV for Oracle7 ad Oracle8 6 Choose Special, click Import. 7 Click Yes whe asked if you wat to add the versio. 8 Click Yes whe asked if you wat to import the compoets of the versio. 9 Click OK i the message box that shows the import is complete. 10 Click Yes whe asked if you wat to chage the curret versio to the imported versio. 11 Repeat steps 2 through 10 for additioal compaies. 2-19
To istall BAAN IV for Oracle7 ad Oracle8 To iitiale parameters Perform the followig steps to iitialize the parameters for each imported demo compay: 1 Log o as user baa. 2 Start BAAN IV Meu Browser. 3 From the Meu browser widow choose Optios, Chage Compay to chage to the relevat compay. 4 Choose File, Ru Program i the Meu Browser. 5 Type tcmcs0295m000 i the Program/Sessio field ad click OK. 6 Choose Special, click Cotiue. Figure 32, Iitialize Parameters 7 Repeat steps 3 through 6 for all demo compaies except compay 000. 2-20
To istall BAAN IV for Oracle7 ad Oracle8 To validate the system This sectio describes how to validate your BAAN IV system. The procedure assumes that you kow the customer ad licese code. The Baa Compay seds you these codes after receivig your order form. To validate the system, complete the followig steps: 1 Log o as user baa. 2 Start BAAN IV Meu browser. 3 Choose Software Istallatio i the Baa IV Tools package. Figure 33, Software Istallatio NOTE 4 Choose the Maitai Requested System Cofiguratio (ttiex3100m000) sessio from the Validatio folder. The system asks for a password. 5 Eter the default password Yi984. Do ot give the default password to uauthorized people because iexperieced users ca cause serious damage to your system. 2-21
To istall BAAN IV for Oracle7 ad Oracle8 6 Eter the start date i the From Date field ad press TAB. NOTE The date must be etered i the followig format: DDMMYY. Do ot eter dashes or ay other puctuatio. Figure 34, Maitai Requested System Cofiguratio 7 Eter the ed date of your licese i the Ed Date field ad press TAB. 8 Select the Ruable check box. 9 Choose File, Save+Exit. 10 Choose Maitai Requested System Cofiguratio (Tools) ttiex3101m000. The system asks for a password. 11 Eter the default password Yi984. 12 Choose Group, Goto. This positios the cursor i the Package field. 13 Press TAB to repositio the cursor. 14 Eter the From Date ad press TAB. 15 Eter the Ed Date. 2-22
To istall BAAN IV for Oracle7 ad Oracle8 16 Eter the Number of Seats (cocurret users) i the Number of Users field. Figure 35, Number of Users 17 Select the correspodig Ruable check box to select the supported database (the RDBMS o which the BAAN IV istallatio is ruig). 18 Select the Ruable check boxes for the other licesed parts. 19 Choose File, Save+Exit. 20 Choose the Prit Requested System Cofiguratio (ttiex3400m000) sessio from the Validatio folder to prit your system cofiguratio. The system asks for a password. 21 Eter the default password Yi984. 2-23
To istall BAAN IV for Oracle7 ad Oracle8 22 Supply the requested iformatio ad click Cotiue. The Select Device sessio is started. Figure 36, Prit Requested System Cofiguratio 23 Select a priter (Device) ad click Cotiue. Figure 37, Select Device 24 Provide this pritout to the Baa Compay. This will be used to create the validatio key. Whe you receive this key i a pritout from the Baa Compay, you ca proceed with the validatio. 2-24
To istall BAAN IV for Oracle7 ad Oracle8 25 Choose the Maitai Security Code/Validatio Key (ttiex3102m000) sessio i the Validatio folder. The system asks for a password. 26 Eter the default password Yi984. 27 Fill i the Validatio Key (Tools) field ad the Validatio Key Software (Stadard) field. Make sure the Security Key field matches the security key o the Baa pritout. Figure 38, Maitai Security Code/Validatio Key 28 Choose File, Save+Exit. 29 Choose the Validate Tools Set (ttiex3220m000) sessio i the Validatio folder. Choose Special, Cotiue. If the validatio process succeeds, the followig message is displayed. Figure 39, Validate Tools Set 30 Click OK. A warig message is displayed. 2-25
To istall BAAN IV for Oracle7 ad Oracle8 31 Read the message ad choose File, Save+Exit. 32 Choose the Cofigure Applicatio (ttiex3225m000) sessio i the Validatio folder. The system displays the followig alert. Figure 40, Cofigure Applicatio 33 Click OK. 34 Click Yes whe asked if you wat to start the licese daemo. Figure 41, Start Licese Daemo 2-26
To istall BAAN IV for Oracle7 ad Oracle8 35 Click Cotiue. Figure 42, Cofigure Applicatio 36 Click OK i the Patch Process Ready message box. 2-27
To istall BAAN IV for Oracle7 ad Oracle8 NOTE NOTE To istall ad cofigure BAAN IV services By default BaaLogic Service ad BaaSharedMemory Service will be ruig after the istallatio. You ca stop, start, ad cofigure the BAAN IV services by startig the Baa NT Maager. BaaLicesig ad the Job Daemos are also available, but ot started automatically. The followig sectios describe how to cofigure the BAAN IV services. To cofigure BaaLicesig service You must ever istall BaaLicesig service before you receive the licese from the Baa Compay. After you succeed i validatig the system, BaaLicesig should be eabled ad started automatically. You ca stop, start, eable, ad disable BaaLicesig. To cofigure BaaLicesig, perform the followig steps: 1 Start the BAAN NT Maager. 2 Right-click the Licesig Service ico. 3 If the Licesig Service has ot bee started, clisk Start. The system displays a message that the Licesig Service is started. 4 If the Licesig Service has bee started ad you wat to disable it, click Stop. The system displays a message that the Licesig Service is stopped. 5 Select Disable. 2-28
To istall BAAN IV for Oracle7 ad Oracle8 To cofigure BaaLogicService BaaLogicService is set to start automatically after istallatio. To cofigure the protocol i BaaLogicService, complete the followig: 1 Start the Baa NT Maager. 2 Right-click the Logic service ico. Figure 43, Baa NT Maager 3 Click Stop. You must stop BaaLogicService before you cofigure the protocol. The system displays a message that the Logic Service is stopped. 4 Right-click the Logic service ico. 2-29
To istall BAAN IV for Oracle7 ad Oracle8 5 Select Protocol. You ca oly modify the Named pipe optio. Figure 44, Protocol Cofiguratio 6 Click OK. 7 Right-click the Logic service ico. 8 Click Start. This starts the BaaLogicService. 2-30
To istall BAAN IV for Oracle7 ad Oracle8 To set up shared memory To set up shared memory, complete the followig steps: 1 Start the Maitai Shared Memory Data (ttaad4150m000) sessio. The followig scree appears. 2 Choose Group, GoTo. Figure 45, Maitai Shared Memory Data 2-31
To istall BAAN IV for Oracle7 ad Oracle8 3 Select Program Object i the SharedMemory Data Type dropdow box. Figure 46, Shared Memory Data Type 4 Choose Special, Copy Objects from DD. Figure 47, Copy Objects from DD 2-32
To istall BAAN IV for Oracle7 ad Oracle8 5 Supply the iformatio as show i Figure 48 ad click Cotiue. Figure 48, Copy Program Objects 6 Click OK. 7 Repeat steps 4 through 6 for the programs dsk to dskzzzzzzzzz. 8 Repeat steps 4 through 6 for the programs stp to stpzzzzzzzzz. 9 Choose Covert to Rutime i the Special meu, as show i Figure 49. Figure 49, Covert to Rutime 2-33
To istall BAAN IV for Oracle7 ad Oracle8 10 Click OK i the message box that shows that ${BSE}/lib/srdd_tab6.1 was created. Figure 50, ${BSE}/lib/srdd_tab6.1 was created You must reboot the system to make the chages take effect. To cofigure BaaSharedMemory BaaSharedMemory is set to start automatically after istallatio. To cofigure the BaaSharedMemory services, complete the followig: 1 Start the Baa NT Maager. 2 Right-click the SharedMemoryService ico. 3 Select Cofigure The system displays the Shared Memory Cofiguratio dialog box. Figure 51, Shared Memory Cofiguratio 2-34
To istall BAAN IV for Oracle7 ad Oracle8 You ca set the followig optios: The Memory optios group box: Start address: The start address will be calculated automatically. Maximum size (MB): This box defies the maximum size of shared memory allocated for BAAN IV applicatios. Note that, if the BAAN IV applicatios eed less tha the size defied i this field, the rest of the reserved shared memory is released as oshared memory. The Load optios group box: Load shared memory at startup: Select this check box to load shared memory at system startup. Load as user: This text box defies the user accout that will be used to load shared memory. Accept the default user baa. Diagostic optios: You ca decide if you wat to Show All Messages, Errors Oly, or o messages at all (Silet). You ca have a look at the messages by usig the BAAN IV Shared Memory Maager. Maitai shared memory timer: Do ot eable this optio (reserved for future use). 4 Click OK to accept the ew shared memory cofiguratio. You retur to the Baa NT Maager. 5 Start ad stop BaaSharedMemory by right-clickig o the ico ad clickig Stop ad Start i successio. You ca check the ew settigs by startig the Shared Memory Maager. 6 Right-click the Shared memory services ico ad select Shared Memory Maager. Figure 52, Shared Memory Maager If settigs are appropriate, click Close. 2-35
To istall BAAN IV for Oracle7 ad Oracle8 To set up the Eterprise Modeler This sectio describes how to cofigure the Eterprise Modeler. It explais how to: Cofigure the priter to prit the diagrams Defie the rutime resource settigs to display the diagrams To set up the priter settigs Perform the followig steps to set up the priter to prit the diagrams (diagrams must be prited o a PostScript priter). 1 Log o to BAAN IV ad use the Maitai Paper Types (ttaad3110m000) sessio to add the Paper Type PS. 2 Use the Maitai Device Data (ttaad3100m000) sessio to add oe or more devices with paper type set to PS. Note that these devices must write directly to a PostScript priter, for example, by usig the hp_lj4 driver. Example values (defied i the Maitai Device Data sessio) for a device able to prit the diagrams are listed as follows: Device Type: Driver: Device queue: Paper Type: Priter hp_lj4 pr8006 PS To defie the ru-time resource settigs The way i which the Eterprise Modeler s editors ad process-flow meus are displayed depeds o the ru-time resource settigs for the Eterprise Modeler. If, for example, a process flow meu does ot fit o the moitor, the the resource settigs must be modified by usig the Maitai Rutime Resources (ttdsk3160m000) sessio. This sessio ca be started by activatig Resource Settigs o the Optios meu i the Eterprise Modeler editor, or by opeig the Miscellaeous meu of the Desktop Maagemet module i BAAN IV Tools. The sessio ca be used to defie user-specific ru-time resource settigs for the Eterprise Modeler, such as fots, colors, sizes of editor compoets, ad default optios. 2-36
To istall BAAN IV for Oracle7 ad Oracle8 The ru-time resources for the Eterprise Modeler have bee divided ito the followig four groups: 1 Orgaizer resources, relatig to the complete Eterprise Modeler 2 Orgaizatio resources, relatig to the Orgaizatio Model Editor 3 Process resources, relatig to the Busiess Process Model Editor 4 Fuctio resources, relatig to the Busiess Fuctio Model Editor The default value of the settigs ca always be restored through the Restore Default optio o the Specific meu i the Maitai Ru-time Resources (ttdsk3160m000) sessio. Oe of the most importat resource settigs for the Eterprise Modeler is the Display Idetificatio field, which is oe of the resource settigs i the Orgaizer group. It is ot possible to zoom i this field, but the followig combiatios have bee predefied, ad ca therefore be etered i this field: 10 ich 640x480 10 ich 800x600 10 ich 1024x768 12 ich 800x600 14 ich 640x480 14 ich 800x600 17 ich 1024x768 17 ich 1280x1024 20 ich 800x600 20 ich 1024x768 20 ich 1280x1024 22 ich 1280x1124 The modified display idetificatio settigs become active the ext time that BAAN IV is started. To defie ew display idetificatios the Maitai Display Idetificatios (tgbrg1120m000) sessio must be used (Eterprise Modeler meu, Master Data, Miscellaeous). As a result of this sessio, the size ad resolutio of the editor screes i the Eterprise Modeler are set to the type of moitor that is used. Aother importat resource settig field for the Eterprise Modeler is the Normal Fot field, which is also oe of the Resource Settig fields i the Orgaizer group. 2-37
To istall BAAN IV for Oracle7 ad Oracle8 To uistall BAAN IV software I case of a istallatio failure, complete the followig steps: 1 Start the Baa NT Maager. Figure 53, Baa NT Maager 2 Right-click Logic service ad select Stop. 3 Right-click the Logic service ad select Disable. 4 Right-click the Shared memory service ad select Stop. 5 Right-click the Shared memory service ad select Disable. 6 Right-click the Licesig service ad select Stop. 7 Right-click the Licesig service ad select Disable. 8 Ru Uistall from Start, Programs, Baa IV, Uistall Baa. 2-38
To istall BAAN IV for Oracle7 ad Oracle8 The BAAN IV BackOffice UIstaller does ot remove all data. You must maually remove the followig items from the system after you ru the BackOffice uistaller: The Baa %BSE% istallatio directory (for example, c:\baa). Files created after the istallatio of BAAN IV BackOffice (such as log files, user cofiguratio files, ad temporary files) remai i the BSE directory. You ca safely remove the whole BSE directory from the system. Baa-specific registry etries. The followig registry items must be removed: registry key HKEY_LOCAL_MACHINE\SOFTWARE\Baa registry values BSE, BSE_REM ad BSE_TMP (all uder HKEY_USERS\.DEFAULT\Eviromet ) The program folder BAAN IV o the Start meu. To remove the folder, use Widows Explorer ad remove the BAAN IV directory uder <WINNT>\Profiles\<User>\Start Meu\Programs Delete the <Widows NT directory>\baa6.1.lic file 2-39
To istall BAAN IV for Oracle7 ad Oracle8 2-40
3 Appedix A - Oracle i a Widows NT eviromet This appedix describes additioal setup cosideratios for Oracle i the Widows NT eviromet. Setup issues to cosider with Oracle o Widows NT There are several uique cosideratios to keep i mid whe you set up Oracle i the Widows NT eviromet to work with BAAN. Issues such as multithreadig i a sigle-operatio system, the Oracle eviromet, Widows NT Evet Viewer ad Performace Moitor utilities requiremets, file system support ad backup fuctioality eed to be cosidered. Here are some keys to successfully settig up the Oracle i the Widows NT eviromet. Multiple threads The followig are some evirometal cosideratios regardig multithreadig i a sigle operatig system: Oracle o Widows NT is a sigle operatig system process with multiple threads. Each Oracle backgroud process, such as LGWR, DBWR, ad ARCH, as well as each dedicated server process is a thread of the master Oracle process o NT. This multithreaded architecture is very efficiet o Widows NT, permittig fast, low-overhead cotext switches due to all threads sharig resources of the master process. If you have multiple Oracle istaces ruig o Widows NT, you have oe Oracle process per istace, each with multiple compoet threads. A Oracle istace ad all the coected users are limited to a 2GB address space o Widows NT, but 3GB o Widows NT Eterprise Editio. Because Oracle rus as a sigle Widows NT process, it is restricted by the Widows NT limit o the address space for a process. O both Widows NT ad Widows NT Eterprise Editio, a process address space is limited to 4GB. 3-1
Appedix A - Oracle i a Widows NT eviromet However, o Widows NT, 2GB of the 4GB limit is reserved for system resources, such as buffer cachig, security resources, ad stacks, while o Widows NT Eterprise Editio, oly 1GB of the 4GB limit is reserved for system resources. Widows NT services permit a program to ru idepedet of a user logo sessio. Oracle registers each istace as a service to allow istaces to be started idepedetly of a user loggig oto the system. For example, Oracle registers a istace started by machie boot as a service. By default services ru as the SYSTEM user i Widows NT. SYSTEM caot create a logo sessio. SYSTEM is specifically for ruig system-orieted services. NOTE Utilities Oracle o Widows NT is itegrated with the Evet Viewer ad Performace Moitor utilities o Widows NT. The Evet Viewer utility is how system-alert messages are displayed o Widows NT. Oracle has itegrated with Evet Viewer to display Oracle startup ad shutdow messages ad the OS audit trail (if you cofigure OS auditig i Oracle) i the Evet Viewer. Performace Moitor is the Widows NT sar utility suite, providig detailed resource utilisatio data for all processes ruig o the system. Oracle has itegrated with Performace Moitor to eable viewig utilizatio of operatig system ad Oracle resources, such as file write bytes per secod related to Oracle or library-cache hit-ratios. The Oracle Performace Moitor ico i the Oracle group starts the stadard Widows NT Performace Moitor utility but feeds it Oracle-specific data. The Widows NT Performace Moitor ad Evet Viewer utilities recogise oly oe Oracle istace o Widows NT. The oly Oracle istace recogised by Widows NT is the istace defied by the registry etry: HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/ORACLE_SID: Although you ca ru multiple istaces of Oracle o NT, oly the oe idetified by the ORACLE_SID value i the registry is visible to the Performace Moitor, Evet Viewer ad Server Maager. 3-2
Appedix A - Oracle i a Widows NT eviromet To tue NT 4.0 for a dedicated Oracle server I geeral NT is a self-tuig OS, with most of the memory ad thread maagemet iterally cotrolled, with o user itervetio possible. The followig are some tuig tips that have bee foud to improve database performace. 1 Remove ay protocols ad services ot required for the Oracle database. This frees memory ad CPU. 2 Move the primarily-used protocols to the top of the bidig list, such as Cotrol Pael, Network, Bidigs, Server, [move protocols]. 3 Choose Noe for performace boost for foregroud applicatio: Cotrol Pael, System, Performace tab. 4 I the Network Cotrol Pael, o the Services tab, click o the Server service ad click the Properties butto. There are four selectios to choose from. The default is Maximize throughput for file sharig. 5 Click Maximize throughput for Network Applicatios, istead of usig the default. The default choice devotes too much memory for file system buffers. Because the server will be a database [applicatio] server ad ot a file server this memory ca better serve the system if give to the applicatio. This will improve Oracle s performace. Additioal tuig suggestios 1 Keep Redo Logs (sequetial disk I/O) o separate disks from data files ad o disks that have very little other activity. 2 Make sure SGA ad PGA size is ot larger tha physical memory (for performace): Use the SHOW SGA parameter to view the sga. 3 Make the Shared Pool area large eough to hold a copy of all of the most used queries. This ca be *key*. 4 4K pages for the DB_BLOCK_SIZE were determied to be optimal for Oracle because WINDOWS NT page size is also 4K. However, for queries that have a lot of full table scas, cosider movig up the block size to 8K. 5 DB_BLOCK_BUFFER: if (Oracle logical reads-physical reads)/oracle logical reads ratio is below.90, add more blocks to the buffer. 6 Make the HASH_AREA_SIZE large if you are doig DSS type work (2*SORT_AREA_SIZE is suggested). 3-3
Appedix A - Oracle i a Widows NT eviromet NOTE To moitor idividual threads through WINDOWS NT performace moitor The followig explais how to get WINDOWS NT thread ids for ay ad all Oracle processes. Ay Oracle threads ot listed by these queries are sql*et watchdog threads ad parallel query slaves. Oce you have the SPID, covert it to decimal. The, i WINDOWS NT performace moitor, look at Thread, IDThread for the thread that is causig problems. Match this umber with the decimal of SPID, ad you have a match. For backgrouds: select spid, ame from v$process, v$bgprocess where paddr = addr; SPID NAME 000BE PMON 000BF DBWR 000C9 SNP0 ad so o The SPID is simply the system thread ID as maitaied by WINDOWS NT. Useful performace moitor couters Process, %Privilege Time for ORACLE80.exe Processor, % User Time for ORACLE80.exe (use ORACLE73.EXE for Oracle7.3 etc..) Oracle threads/processes should be spedig more time i %User time tha %Privilege time: User time is the Oracle real-applicatio time-usage, Privilege time is the Oracle server processes i the kerel (memory ad disk maagemet, ad so o). Processor, >%Processor Time: if over 85%, CPU is boud Hard disk/logical disk couters First, ru the utility from the DOS prompt: diskperf -y to activate the disk couters ad reboot the machie. Note, this takes system resources, so oly use it while testig, ot durig actual productio uavg. To tur off the couters, ru diskperf - ad reboot. Avg.PhysicalDisk-->Disk Trasfers/Sec: The amout of reads/writes o the physical disk. PhysicalDisk, Avg. Disk Bytes Read/Sec, Avg. Disk Queue Legth (average umber of requests queued to disk durig sample iterval). 3-4
Appedix A - Oracle i a Widows NT eviromet Pagig File, %Usage Peak: Shows how ofte the OS goes to pagig swap file o disk (for additioal memory). If the usage peak is too high, you eed more RAM. LogicalDisk, Avg. Disk Queue Legth: Similar to Physical disk, but this time lookig at OS-labelled logical drives. Same couters as Physical Disk ca be used. Oracle specific couters Oracle BufferCache, %PhysReads/gets: Ratio of physical reads for data/data grabbed from the db_block_buffer. Oracle Library Cache, %Reloads/Pis: Ratio of reloads(parsig, ad so o) of queries i the Shared Pool of the SGA/ pied, pre-parsed sql already foud i the area. Oracle Sorts sorts i memory, sorts o disk/sec: may be useful for the Pershig bechmark sceario. Oracle DataFiles ca moitor the reads/writes to each datafile i the Oracle database. Oracle DBWR Stats ca moitor the DBWR process. Performace moitor setup otes Performace moitor is foud i the Admiistrative Tools program group. It automatically loads ito chart mode for moitorig. To add couters, simply click the Add (+) butto. To have Oracle couters available from withi perfmo, be sure to istall the Oracle Performace Utility foud o the Oracle istallatio media. To activate disk couters, be sure to ru diskperf -y ad reboot the machie. To deactivate, ru disperf - ad reboot. Be sure to tur this off whe you go ito productio. You ca ru performace moitor remotely to ot adversely affect the machie that is ruig the db. Select the computer (usig a UNC ame) whe you add couters to the chart. 3-5
Appedix A - Oracle i a Widows NT eviromet 3-6