B517 NPN Darlington Transistor Features This device is designed for applications requiring extremely high current gain at currents to 1. A. Sourced from process 5. 1 2 3 1 2 3 September 215 TO-92 1. ollector 2. Base 3. Emitter Straight Lead Bulk Packing Bent Lead Tape & Reel Ammo Packing Ordering Information Part Number Top Mark Package Packing Method B517_D74Z B517 TO-92 3L (Bent Lead) Ammo (1), (2) Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at T A = 25 unless otherwise noted. Symbol Parameter Value Unit V EO ollector-emitter Voltage 3 V V BO ollector-base Voltage 4 V V EBO Emitter-Base Voltage 1 V I - ontinuous 1.2 A T J, T STG Operating and Storage Junction Temperature Range -55 to +15 Notes: 1. These ratings are based on a maximum junction temperature of 15. 2. These are steady-state limits. Fairchild Semiconductor should be consulted on applications involving pulsed or low-duty-cycle operations. 25 Fairchild Semiconductor orporation www.fairchildsemi.com B517 Rev. 1.1
Thermal haracteristics (3) Values are at T A = 25 unless otherwise noted. Symbol Parameter Value Unit Total Device Dissipation, T A = 25 625 mw P D Derate Above 25 5. mw/ R θj Thermal Resistance, Junction-to-ase 83.3 /W R θja Thermal Resistance, Junction-to-Ambient 2 /W Note: 3. PB size: FR-4, 76 mm x 114 mm x 1.57 mm (3. inch x 4.5 inch x.62 inch) with minimum land pattern size. Electrical haracteristics Values are at T A = 25 unless otherwise noted. Symbol Parameter onditions Min. Typ. Max. Unit V EO ollector-emitter Breakdown Voltage I = 2. ma, I B = 3 V V BO ollector-base Breakdown Voltage I = 1 μa, I E = 4 V V EBO Emitter-Base Breakdown Voltage I E = 1 na, I = 1 V I BO ollector ut-off urrent V B = 3 V, I E = 1 na h FE D urrent Gain V E = 2 V, I = 2 ma 3, V E (sat) ollector-emitter Saturation Voltage I = 1 ma, I B =.1 ma 1 V V BE (on) Base-Emitter On Voltage I = 1 ma, V E = 5. V 1.4 V 25 Fairchild Semiconductor orporation www.fairchildsemi.com B517 Rev. 1.1 2
Typical Performance haracteristics h - TYPIAL PULSED URRENT GAIN (K) FE 25 2 15 1 5 V = 5V E - 4.1.1.1 1 I - OLLETOR URRENT (A) 25 V - OLLETOR EMITTER VOLTAGE (V) ESAT 1.6 1.2.8.4 β = 1-4 1 1 1 1 I - OLLETOR URRENT (ma) 25 Figure 1. Typical Pulsed urrent Gain vs. Figure 2. ollector-emitter Saturation Voltage vs. V - BASE EMITTER VOLTAGE (V) BESAT 2 1.6 1.2.8.4 β = 1-4 1 1 1 1 I - OLLETOR URRENT (ma) 25 V - BASE EMITTER ON VOLTAGE (V) BEON 2 1.6 1.2.8.4-4 1 1 1 1 I - OLLETOR URRENT (ma) 25 V = 5V E Figure 3. Base-Emitter Saturation Voltage vs. Figure 4. Base Emitter On Voltage vs. I - OLLETOR URRENT (na) BO 1 V B= 3V 1 1.1.1 25 5 75 1 125 T A- AMBIENT TEMPERATURE ( ) BV - BREAKDOWN VOLTAGE (V) ER 62.5 62 61.5 61 6.5 6 59.5.1 1 1 1 1 RESISTANE (k Ω) Figure 5. ollector ut-off urrent vs. Ambient Temperature Figure 6. ollector-emitter Breakdown Voltage with Resistance Between Emitter-Base 25 Fairchild Semiconductor orporation www.fairchildsemi.com B517 Rev. 1.1 3
Typical Performance haracteristics (ontinued) APAITANE (pf) 2 1 5 2.1 1 1 1 V ib - OLLETOR VOLTAGE(V) f = 1. MHz ob f - GAIN BANDWIDTH PRODUT (MHz) T 5 4 3 2 1 V ce = 5V 1 1 2 5 1 15 I - OLLETOR URRENT (ma) Figure 7. Input and Output apacitance vs. Reverse Voltage Figure 8. Gain Bandwidth Product vs. 1 P - POWER DISSIPATION (W) D.75.5.25 TO-92 25 5 75 1 125 15 o TEMPERATURE ( ) Figure 9. Power Dissipation vs. Ambient Temperature 25 Fairchild Semiconductor orporation www.fairchildsemi.com B517 Rev. 1.1 4
Physical Dimensions Figure 1. 3-Lead, TO-92, Molded,.2 In Line Spacing Lead Form, Ammo, Tape and Reel Packing 25 Fairchild Semiconductor orporation www.fairchildsemi.com B517 Rev. 1.1 5
TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPower AttitudeEngine Awinda AX-AP * BitSi Build it Now oreplus orepower ROSSVOLT TL urrent Transfer Logic DEUXPEED Dual ool EcoSPARK EfficientMax ESB Fairchild Fairchild Semiconductor FAT Quiet Series FAT Fastvore FETBench FPS F-PFS FRFET Global Power Resource SM GreenBridge Green FPS Green FPS e-series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and Better MegaBuck MIROOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax MotionGrid MTi MTx MVN mwsaver OptoHiT OPTOLOGI OPTOPLANAR Power Supply WebDesigner PowerTrench PowerXS Programmable Active Droop QFET QS Quiet Series Rapidonfigure Saving our world, 1mW/W/kW at a time SignalWise SmartMax SMART START Solutions for Your Success SPM STEALTH SuperFET SuperSOT -3 SuperSOT -6 SuperSOT -8 SupreMOS SyncFET Sync-Lock * TinyBoost TinyBuck Tinyalc TinyLogic TINYOPTO TinyPower TinyPWM TinyWire TranSi TriFault Detect TRUEURRENT * μserdes UH Ultra FRFET UniFET VX VisualMax VoltagePlus XS Xsens * Trademarks of System General orporation, used under license by Fairchild Semiconductor. DISLAIMER FAIRHILD SEMIONDUTOR RESERVES THE RIGHT TO MAKE HANGES WITHOUT FURTHER NOTIE TO ANY PRODUTS HEREIN TO IMPROVE RELIABILITY, FUNTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRHILDSEMI.OM. FAIRHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLIATION OR USE OF ANY PRODUT OR IRUIT DESRIBED HEREIN; NEITHER DOES IT ONVEY ANY LIENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPEIFIATIONS DO NOT EXPAND THE TERMS OF FAIRHILD S WORLDWIDE TERMS AND ONDITIONS, SPEIFIALLY THE WARRANTY THEREIN, WHIH OVERS THESE PRODUTS. AUTHORIZED USE Unless otherwise specified in this data sheet, this product is a standard commercial product and is not intended for use in applications that require extraordinary levels of quality and reliability. This product may not be used in the following applications, unless specifically approved in writing by a Fairchild officer: (1) automotive or other transportation, (2) military/aerospace, (3) any safety critical application including life critical medical equipment where the failure of the Fairchild product reasonably would be expected to result in personal injury, death or property damage. ustomer s use of this product is subject to agreement of this Authorized Use policy. In the event of an unauthorized use of Fairchild s product, Fairchild accepts no liability in the event of product failure. In other respects, this product shall be subject to Fairchild s Worldwide Terms and onditions of Sale, unless a separate agreement has been signed by both Parties. ANTI-OUNTERFEITING POLIY Fairchild Semiconductor orporation's Anti-ounterfeiting Policy. Fairchild's Anti-ounterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Terms of Use ounterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. ustomers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Datasheet contains the design specifications for product development. Specifications may change Advance Information Formative / In Design in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Preliminary First Production Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make No Identification Needed Full Production changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. Obsolete Not In Production The datasheet is for reference information only. Rev. I76 Fairchild Semiconductor orporation www.fairchildsemi.com