CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters
|
|
|
- Daisy Shields
- 7 years ago
- Views:
Transcription
1 CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters Features Wide supply voltage range: 3.0V to 15V High noise immunity: 0.45 V DD (Typ.) Low power TTL compatibility: Fan out of 2 driving 74L or 1 driving 74LS Medium speed operation: 8MHz typ. at V DD = 10V Schmitt trigger clock input Ordering Information Order Number Package Number General Description May 2007 The CD4060BC is a 14-stage ripple carry binary counter, and the CD4040BC is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical 1 at the reset input independent of clock. Devices also available in Tape and Reel. Specify by appending the suffix letter X to the ordering number. Connection Diagrams Pin Assignments for DIP and SOIC CD4040BC Top View Package Description CD4040BCM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow CD4060BCM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow CD4060BCN N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Pin Assignments for DIP and SOIC CD4060BC Top View tm CD4040BC, DCD4060BC Rev. 1.5
2 Schematic Diagrams CD4040BC CD4060BC CD4040BC, DCD4060BC Rev
3 CD4060B Typical Oscillator Connections RC Oscillator Crystal Oscillator CD4040BC, DCD4060BC Rev
4 Absolute Maximum Ratings (1) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Rating V DD Supply Voltage 0.5V to +18V V IN Input Voltage 0.5V to V DD +0.5V T S Storage Temperature Range 65 C to +150 C P D Package Dissipation N Package M Package 700mW 500 mw T L Lead Temperature (Soldering, 10 seconds) 260 C Note: 1. V SS = 0V unless otherwise specified. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Rating V DD Supply Voltage +3V to +15V V IN Input Voltage 0V to V DD T A Operating Temperature Range 55 C to +125 C CD4040BC, DCD4060BC Rev
5 DC Electrical Characteristics (2) Symbol Parameter Conditions I DD V OL V OH V IL V IH Quiescent Device Current LOW Level Output Voltage HIGH Level Output Voltage LOW Level Input Voltage HIGH Level Input Voltage 55 C +25 C +125 C Min. Max. Min. Typ. Max. Min. Max. Note: 2. V SS = 0V unless otherwise specified. 3. Data does not apply to oscillator points φ 0 and φ 0 of CD4060BC. I OH and I OL are tested one output at a time. Units V DD = 5V, V IN = V DD or V SS µa V DD = 10V, V IN = V DD or V SS V DD = 15V, V IN = V DD or V SS V DD = 5V V V DD = 10V V DD = 15V V DD = 5V V V DD = 10V V DD = 15V V DD = 5V, V O = 0.5V or 4.5V V V DD = 10V, V O = 1.0V or 9.0V V DD = 15V, V O = 1.5V or 13.5V V DD = 5V, V O = 0.5V or 4.5V V V DD = 10V, V O = 1.0V or 9.0V V DD = 15V, V O = 1.5V or 13.5V V = 5V, V = 0.4V ma V = 5V, V = 4.6V ma I OL LOW Level Output Current (3) DD O V DD = 10V, V O = 0.5V V DD = 15V, V O = 1.5V I OH HIGH Level Output Current (3) DD O V DD = 10V, V O = 9.5V V DD = 15V, V O = 13.5V I IN Input Current V DD = 15V, V IN = 0V µa V DD = 15V, V IN = 15V CD4040BC, DCD4060BC Rev
6 AC Electrical Characteristics (4) CD4040BC T A = 25 C, C L = 50pF, R L = 200kΩ, t r = t f = 20 ns, unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Units t PHL1, t PLH1 Propagation Delay Time to Q 1 V DD = 5V ns V DD = 10V V DD = 15V t PHL, t PLH Interstage Propagation Delay Time V DD = 5V ns from Q n to Q n+1 V DD = 10V V DD = 15V t THL, t TLH Transition Time V DD = 5V ns V DD = 10V V DD = 15V t WL, t WH Minimum Clock Pulse Width V DD = 5V ns V DD = 10V V DD = 15V t rcl, t fcl Maximum Clock Rise and Fall Time V DD = 5V No Limit ns V DD = 10V No Limit V DD = 15V No Limit f CL Maximum Clock Frequency V DD = 5V MHz V DD = 10V 4 10 V DD = 15V 5 12 t PHL(R) Reset Propagation Delay V DD = 5V ns V DD = 10V V DD = 15V t WH(R) Minimum Reset Pulse Width V DD = 5V ns V DD = 10V V DD = 15V C IN Average Input Capacitance Any Input pf C PD Power Dissipation Capacitance 50 pf Note: 4. AC Parameters are guaranteed by DC correlated testing. CD4040BC, DCD4060BC Rev
7 AC Electrical Characteristics (5) CD4060BC T A = 25 C, C L = 50pF, R L = 200k, t r = t f = 20 ns, unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Units t PHL4, t PLH4 Propagation Delay Time to Q 4 V DD = 5V ns V DD = 10V V DD = 15V t PHL, t PLH Interstage Propagation Delay Time V DD = 5V ns from Q n to Q n+1 V DD = 10V V DD = 15V t THL, t TLH Transition Time V DD = 5V ns V DD = 10V V DD = 15V t WL, t WH Minimum Clock Pulse Width V DD = 5V ns V DD = 10V V DD = 15V t rcl, t fcl Maximum Clock Rise and Fall Time V DD = 5V No Limit ns V DD = 10V No Limit V DD = 15V No Limit f CL Maximum Clock Frequency V DD = 5V 1 3 MHz V DD = 10V 3 8 V DD = 15V 4 10 t PHL(R) Reset Propagation Delay V DD = 5V ns V DD = 10V V DD = 15V t WH(R) Minimum Reset Pulse Width V DD = 5V ns V DD = 10V V DD = 15V C IN Average Input Capacitance Any Input pf C PD Power Dissipation Capacitance 50 pf Note: 5. AC Parameters are guaranteed by DC correlated testing. RC Oscillator Notes: 1. R 2 = 2 R 1 to 10 R 1 2. RC Oscillator applications are not recommended at supply voltages below 7.0V for R 1 < 50kΩ 3. f R 1 C X at V CC = 10V CD4040BC, DCD4060BC Rev
8 Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M16A CD4040BC, DCD4060BC Rev
9 Physical Dimensions (Continued) Dimensions are in inches (millimeters) unless otherwise noted. Figure Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N16E CD4040BC, DCD4060BC Rev
10 TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks ACEx Build it Now CorePLUS CROSSVOLT CTL Current Transfer Logic EcoSPARK FACT Quiet Series FACT FAST FastvCore FPS FRFET Global Power Resource SM Green FPS DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Green FPS e-series GTO i-lo IntelliMAX ISOPLANAR MegaBuck MICROCOUPLER MicroPak Motion-SPM OPTOLOGIC OPTOPLANAR PDP-SPM Power220 Power247 POWEREDGE Power-SPM PowerTrench Programmable Active Droop QFET QS QT Optoelectronics Quiet Series RapidConfigure SMART START SPM STEALTH SuperFET SuperSOT -3 SuperSOT -6 SuperSOT -8 Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Obsolete Formative or In Design First Production Full Production Not In Production SyncFET The Power Franchise TinyBoost TinyBuck TinyLogic TINYOPTO TinyPower TinyPWM TinyWire µserdes UHC UniFET VCX 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I28 CD4040BC, DCD4060BC Rev
74LVX132 Low Voltage Quad 2-Input NAND Schmitt Trigger
74LVX132 Low Voltage Quad 2-Input NAND Schmitt Trigger Features Input voltage level translation from 5V to 3V Ideal for low power/low noise 3.3V applications Guaranteed simultaneous switching noise level
74VHC112 Dual J-K Flip-Flops with Preset and Clear
74VHC112 Dual J-K Flip-Flops with Preset and Clear Features High speed: f MAX = 200MHz (Typ.) at V CC = 5.0V Low power dissipation: I CC = 2µA (Max.) at T A = 25 C High noise immunity: V NIH = V NIL =
CD4013BC Dual D-Type Flip-Flop
CD4013BC Dual D-Type Flip-Flop General Description The CD4013B dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement mode transistors.
CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset
October 1987 Revised March 2002 CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset General Description The CD4027BC dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits
CD40174BC CD40175BC Hex D-Type Flip-Flop Quad D-Type Flip-Flop
Hex D-Type Flip-Flop Quad D-Type Flip-Flop General Description The CD40174BC consists of six positive-edge triggered D- type flip-flops; the true outputs from each flip-flop are externally available. The
FDD4243 40V P-Channel PowerTrench MOSFET -40V, -14A, 44mΩ Features
FDD443 4V P-Channel PowerTrench MOSFET -4V, -4A, 44mΩ Features Max r DS(on) = 44mΩ at V GS = -V, I D = -6.7A Max r DS(on) = 64mΩ at V GS = -4.5V, I D = -5.5A High performance trench technology for extremely
FSAL200 Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch
FSAL200 Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch Features Typical 6Ω Switch Connection Between Two Ports Minimal Propagation Delay Through the Switch Low I CC Zero Bounce in Flow-Through
CD4013BC Dual D-Type Flip-Flop
Dual D-Type Flip-Flop General Description The CD4013B dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit cotructed with N- and P-channel enhancement mode traistors. Each
CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate
CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate General Description The CD4001BC and CD4011BC quad gates are monolithic complementary MOS (CMOS) integrated
CD4043BC CD4044BC Quad 3-STATE NOR R/S Latches Quad 3-STATE NAND R/S Latches
CD4043BC CD4044BC Quad 3-STATE NOR R/S Latches Quad 3-STATE NAND R/S Latches General Description The CD4043BC are quad cross-couple 3-STATE CMOS NOR latches, and the CD4044BC are quad cross-couple 3- STATE
SS32 - S310 Schottky Rectifier
SS32 - S310 Schottky Rectifier Features Metal to Silicon Rectifiers, Majority Carrier Conduction Low-Forward Voltage Drop Easy Pick and Place High-Surge Current Capability Description October 2013 The
CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate
Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate General Description The CD4001BC and CD4011BC quad gates are monolithic complementary MOS (CMOS) integrated circuits cotructed
1N5401-1N5408 General-Purpose Rectifiers
N540 - N5408 General-Purpose Rectifiers Features 3.0 A Operation at T A = 75 C with No Thermal Runaway High Current Capability Low Leakage DO-20AD COLOR BAND DENOTES CATHODE August 205 N540 - N5408 General-Purpose
P6KE6V8(C)A - P6KE440(C)A 600 W Transient Voltage Suppressors
P6KE6V8(C)A - P6KE440(C)A 600 W Transient Suppressors Features Glass-Passivated Junction 600 W Peak Pulse Power Capability at 1.0 ms Excellent Clamping Capability Low Incremental Surge Resistance Fast
MBR20200CT Dual High Voltage Schottky Rectifier
MBR20200CT Dual High Voltage Schottky Rectifier Features Low Forward Voltage Drop Low Power Loss and High Efficiency High Surge Capability RoHS Compliant Matte Tin (Sn) Lead Finish Terminal Leads Surface
Description. TO-220F FDPF Series. Symbol Parameter FDP26N40 FDPF26N40 Units V DSS Drain to Source Voltage 400 V V GSS Gate to Source Voltage ±30 V
FDP26N40 / FDPF26N40 N-Channel MOSFET 400V, 26A, 0.6Ω Features R DS(on) = 0.3Ω ( Typ.)@ V GS = 0V, I D = 3A Low gate charge ( Typ. 48nC) Low C rss ( Typ. 30pF) Fast switching 00% avalanche tested Improved
MM74HC174 Hex D-Type Flip-Flops with Clear
Hex D-Type Flip-Flops with Clear General Description The MM74HC174 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise immunity,
N-Channel Logic Level Enhancement Mode Field Effect Transistor. Features. TA=25 o C unless otherwise noted
October 5 BSS38 BSS38 N-Channel Logic Level Enhancement Mode Field Effect Transistor General Description These N-Channel enhancement mode field effect transistors are produced using Fairchild s proprietary,
CD4027BM CD4027BC Dual J-K Master Slave Flip-Flop with Set and Reset
CD4027BM CD4027BC Dual J-K Master Slave Flip-Flop with Set and Reset General Description These dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-
QRE1113, QRE1113GR Minature Reflective Object Sensor
QRE1113, QRE1113GR Minature Reflective Object Sensor Features Phototransistor output No contact surface sensing Miniature package Lead form style: Gull Wing QRE1113GR Package Dimensions 1.80 2.90 2.50
MM74HC273 Octal D-Type Flip-Flops with Clear
MM74HC273 Octal D-Type Flip-Flops with Clear General Description The MM74HC273 edge triggered flip-flops utilize advanced silicon-gate CMOS technology to implement D-type flipflops. They possess high noise
MM74HC14 Hex Inverting Schmitt Trigger
MM74HC14 Hex Inverting Schmitt Trigger General Description The MM74HC14 utilizes advanced silicon-gate CMOS technology to achieve the low power dissipation and high noise immunity of standard CMOS, as
BD135 / 137 / 139 NPN Epitaxial Silicon Transistor
BD135 / 137 / 139 NPN Epitaxial Silicon Transistor Features Complement to BD136, BD138 and BD140 respectively Applications Medium Power Linear and Switching 1 TO-126 1. Emitter 2.Collector 3.Base August
DM74LS191 Synchronous 4-Bit Up/Down Counter with Mode Control
August 1986 Revised February 1999 DM74LS191 Synchronous 4-Bit Up/Down Counter with Mode Control General Description The DM74LS191 circuit is a synchronous, reversible, up/ down counter. Synchronous operation
DM7474 Dual Positive-Edge-Triggered D-Type Flip-Flops with Preset, Clear and Complementary Outputs
DM7474 Dual Positive-Edge-Triggered D-Type Flip-Flops with Preset, Clear and Complementary Outputs General Description This device contains two independent positive-edge-triggered D-type flip-flops with
SS22 - S210 Schottky Rectifier
SS22 - S210 Schottky Rectifier Features Glass-Passivated Junctions High-Current Capability, Low V F Applications Low Voltage High-Frequency Inverters Free Wheeling Polarity Protection Description October
S1A - S1M General Purpose Rectifiers
S1A - S1M General Purpose Rectifiers Features 1 AI F(AV) Current Rating Glass Passivated Low Leakage: - 1 μa Maximum at 25 C - 50 μa Maximum at 125 C Fast Response: 1.8 μs (Typical) 30 A Surge Rating 50
TIP41A / TIP41B / TIP41C NPN Epitaxial Silicon Transistor
TIP41A / TIP41B / TIP41C NPN Epitaxial Silicon Transistor Features Medium Power Linear Switching Applications Complement to TIP42 Series Ordering Information 1 TO-220 1.Base 2.Collector 3.Emitter November
DM74LS193 Synchronous 4-Bit Binary Counter with Dual Clock
September 1986 Revised March 2000 DM74LS193 Synchronous 4-Bit Binary Counter with Dual Clock General Description The DM74LS193 circuit is a synchronous up/down 4-bit binary counter. Synchronous operation
MM74HC4538 Dual Retriggerable Monostable Multivibrator
MM74HC4538 Dual Retriggerable Monostable Multivibrator General Description The MM74HC4538 high speed monostable multivibrator (one shots) is implemented in advanced silicon-gate CMOS technology. They feature
DM74LS169A Synchronous 4-Bit Up/Down Binary Counter
Synchronous 4-Bit Up/Down Binary Counter General Description This synchronous presettable counter features an internal carry look-ahead for cascading in high-speed counting applications. Synchronous operation
Features. T A=25 o C unless otherwise noted. Symbol Parameter Ratings Units. (Note 1b) 0.46
N-Channel.8 Vgs Specified PowerTrench MOSFET October 2 General Description This 2V N-Channel MOSFET uses Fairchild s high voltage PowerTrench process. It has been optimized for power management applications.
MM74HCT373 MM74HCT374 3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop
3-STATE Octal D-Type Latch 3-STATE Octal D-Type Flip-Flop General Description The MM74HCT373 octal D-type latches and MM74HCT374 Octal D-type flip flops advanced silicongate CMOS technology, which provides
Features. TA=25 o C unless otherwise noted
NDSAN N-Channel, Logic Level, PowerTrench MOSFET June NDSAN General Description These N-Channel Logic Level MOSFETs are produced using Fairchild Semiconductor s advanced PowerTrench process that has been
RS1A - RS1M Fast Rectifiers
RSA - RSM Fast Rectifiers Features Glass-Passivated Junction For Surface Mounted Applications uilt-in Strain Relief, Ideal for Automated Placement UL Certified: Certificate # E326243 SMA/DO-24AC COLOR
DM74LS00 Quad 2-Input NAND Gate
DM74LS00 Quad 2-Input NAND Gate General Description This device contains four independent gates each of which performs the logic NAND function. Ordering Code: August 1986 Revised March 2000 Order Number
MM74C74 Dual D-Type Flip-Flop
Dual D-Type Flip-Flop General Description The MM74C74 dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit cotructed with N- and P-channel enhancement traistors. Each flip-flop
MID400 AC Line Monitor Logic-Out Device
MID400 AC Line Monitor Logic-Out Device Features Direct operation from any line voltage with the use of an external resistor. Externally adjustable time delay Externally adjustable AC voltage sensing level
DM74LS112A Dual Negative-Edge-Triggered Master-Slave J-K Flip-Flop with Preset, Clear, and Complementary Outputs
August 1986 Revised March 2000 DM74LS112A Dual Negative-Edge-Triggered Master-Slave J-K Flip-Flop with Preset, Clear, and Complementary General Description This device contains two independent negative-edge-triggered
DM74LS05 Hex Inverters with Open-Collector Outputs
Hex Inverters with Open-Collector Outputs General Description This device contains six independent gates each of which performs the logic INVERT function. The open-collector outputs require external pull-up
DM74LS151 1-of-8 Line Data Selector/Multiplexer
1-of-8 Line Data Selector/Multiplexer General Description This data selector/multiplexer contains full on-chip decoding to select the desired data source. The DM74LS151 selects one-of-eight data sources.
BD434/436/438. Symbol Parameter Value Units V CBO Collector-Base Voltage : BD434 : BD436 : BD438
Medium Power Linear and Switching Applications Complement to BD433, BD435 and BD437 respectively 1 TO26 1. Emitter 2.Collector 3.Base PNP Epitaxial Silicon Transistor Absolute Maximum Ratings T C =25 C
Features 1.7 A, 20 V. R DS(ON) Symbol Parameter Ratings Units
N-Channel.5V Specified PowerTrench TM MOSFET April 999 General Description This N-Channel.5V specified MOSFET is produced using Fairchild Semiconductor's advanced PowerTrench process that has been especially
Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking
14-stage ripple carry binary counter/divider and oscillator Applications Automotive Industrial Computer Consumer Description Datasheet - production data Features Medium speed operation Common reset Fully
74AC139 74ACT139 Dual 1-of-4 Decoder/Demultiplexer
Dual 1-of-4 Decoder/Demultiplexer General Description The AC/ACT139 is a high-speed, dual 1-of-4 decoder/ demultiplexer. The device has two independent decoders, each accepting two inputs and providing
FMBS2383 NPN Epitaxial Silicon Transistor
FMBS2383 NPN Epitaxial Silicon Transistor Features Power Amplifier ollector-emitter Voltage : V EO =60V urrent Gain Bandwidth Product : f T =20MHz SuperSOT TM -6 E B 2 3 6 5 4 April 20 Marking : 2383 Absolute
Features. I-PAK FQU Series
00V LOGIC N-Channel MOSFET General Description These N-Channel enhancement mode power field effect transistors are produced using Fairchild s proprietary, planar stripe, DMOS technology. This advanced
FGH40N60UFD 600 V, 40 A Field Stop IGBT
FGH4N6UFD 6 V, 4 A Field Stop IGBT Features High Current Capability Low Saturation Voltage: V CE(sat) =.8 V @ I C = 4 A High Input Impedance Fast Switching RoHS Compliant Applications Solar Inverter, UPS,
74LS193 Synchronous 4-Bit Binary Counter with Dual Clock
74LS193 Synchronous 4-Bit Binary Counter with Dual Clock General Description The DM74LS193 circuit is a synchronous up/down 4-bit binary counter. Synchronous operation is provided by having all flip-flops
CD4008BM CD4008BC 4-Bit Full Adder
CD4008BM CD4008BC 4-Bit Full Adder General Description The CD4008B types consist of four full-adder stages with fast look-ahead carry provision from stage to stage Circuitry is included to provide a fast
1-800-831-4242
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. DM74LS161A DM74LS163A Synchronous 4-Bit Binary Counters General Description
Applications. Pin 1 TOP. WL-CSP 0.8X0.8 Thin
FDZ66PZ P-Channel.5 V Specified PowerTrench Thin WL-CSP MOSFET - V, -.6 A, 4 mω Features Max r DS(on) = 4 mω at V GS = -4.5 V, I D = - A Max r DS(on) = 8 mω at V GS = -.5 V, I D = -.5 A Max r DS(on) =
BC546 / BC547 / BC548 / BC549 / BC550 NPN Epitaxial Silicon Transistor
BC546 / BC547 / BC548 / BC549 / BC550 NPN Epitaxial Silicon Transistor Features Switching and Amplifier High-oltage: BC546, CEO = 65 Low-Noise: BC549, BC550 Complement to BC556, BC557, BC558, BC559, and
DM74LS157 DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers
September 1986 Revised April 2000 DM74LS157 DM74LS158 Quad 2-Line to 1-Line Data Selectors/Multiplexers General Description These data selectors/multiplexers contain inverters and drivers to supply full
Features S 1. TA=25 o C unless otherwise noted. (Note 1b) 0.8
FC54P V P-Channel Logic Level PowerTrench MOSFET February 22 FC54P General escription This V P-Channel MOSFET uses Fairchild s high voltage PowerTrench process. It has been optimized for power management
FDS6679AZ P-Channel PowerTrench MOSFET -30V, -13A, 9mΩ General Description
FS6679AZ P-Channel PowerTrench MOSFET -3V, -3A, 9mΩ General escription This P-Channel MOSFET is producted using Fairchild Semiconductor s advanced PowerTrench process that has been especially tailored
74AC191 Up/Down Counter with Preset and Ripple Clock
74AC191 Up/Down Counter with Preset and Ripple Clock General Description The AC191 is a reversible modulo 16 binary counter. It features synchronous counting and asynchronous presetting. The preset feature
BUZ11. 30A, 50V, 0.040 Ohm, N-Channel Power MOSFET. Features. [ /Title (BUZ1 1) /Subject. (30A, 50V, 0.040 Ohm, N- Channel. Ordering Information
Data Sheet June 1999 File Number 2253.2 [ /Title (BUZ1 1) /Subject (3A, 5V,.4 Ohm, N- Channel Power MOS- FET) /Autho r () /Keywords (Intersil Corporation, N- Channel Power MOS- FET, TO- 22AB ) /Creator
DM74LS153 Dual 1-of-4 Line Data Selectors/Multiplexers
Dual 1-of-4 Line Data Selectors/Multiplexers General Description Each of these data selectors/multiplexers contains inverters and drivers to supply fully complementary, on-chip, binary decoding data selection
FPF2163/4/5 Full Function Load Switch with Adjustable Current Limit
October 2008 FPF2163/4/5 Full Function Load Switch with Adjustable Current Limit Features 1.8 to 5.5V Input Voltage Range Controlled Turn-On 0.15-1.5A Adjustable Current Limit Undervoltage Lockout Thermal
FQPF2N70. N-Channel QFET MOSFET 700 V, 2.0 A, 6.3 Ω. FQPF2N70 N-Channel QFET MOSFET. Absolute Maximum Ratings T C = 25 C unless otherwise noted.
FQPF2N70 N-Channel QFET MOSFET 700 V, 2.0 A, 6.3 Ω Description This N-Channel enhancement mode power MOSFET is produced using Fairchild Semiconductor s proprietary planar stripe and DMOS technology. This
QFET TM FQP50N06. Features. TO-220 FQP Series
60V N-Channel MOSFET QFET TM General Description These N-Channel enhancement mode power field effect transistors are produced using Fairchild s proprietary, planar stripe, DMOS technology. This advanced
74AC138 74ACT138 1-of-8 Decoder/Demultiplexer
1-of-8 Decoder/Demultiplexer General Description The AC/ACT138 is a high-speed 1-of-8 decoder/demultiplexer. This device is ideally suited for high-speed bipolar memory chip select address decoding. The
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines
74F74 Dual D-Type Positive Edge-Triggered Flip-Flop
Dual D-Type Positive Edge-Triggered Flip-Flop General Description The F74 is a dual D-type flip-flop with Direct Clear and Set inputs and complementary (Q, Q) outputs. Information at the input is traferred
IRF640, RF1S640, RF1S640SM
IRF64, RFS64, RFS64SM Data Sheet January 22 8A, 2V,.8 Ohm, N-Channel Power MOSFETs These are N-Channel enhancement mode silicon gate power field effect transistors. They are advanced power MOSFETs designed,
CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger
CD4093BM CD4093BC Quad 2-Input NAND Schmitt Trigger General Description The CD4093B consists of four Schmitt-trigger circuits Each circuit functions as a 2-input NAND gate with Schmitt-trigger action on
IRF840. 8A, 500V, 0.850 Ohm, N-Channel Power MOSFET. Features. Ordering Information. Symbol. Packaging. Data Sheet January 2002
IRF84 Data Sheet January 22 8A, 5V,.85 Ohm, N-Channel Power MOSFET This N-Channel enhancement mode silicon gate power field effect transistor is an advanced power MOSFET designed, tested, and guaranteed
DM74LS47 BCD to 7-Segment Decoder/Driver with Open-Collector Outputs
DM74LS47 BCD to 7-Segment Decoder/Driver with Open-Collector Outputs General Description The DM74LS47 accepts four lines of BCD (8421) input data, generates their complements internally and decodes the
74VHC574 Octal D-Type Flip-Flop with 3-STATE Outputs
74HC574 Octal D-Type Flip-Flop with 3-STATE Outputs General Description Ordering Code: March 1993 Revised May 2005 The HC574 is an advanced high speed CMOS octal flipflop with 3-STATE output fabricated
LM78XX / LM78XXA 3-Terminal 1 A Positive Voltage Regulator
LM78XX / LM78XXA 3-Terminal A Positive oltage Regulator Features Output Current up to A s: 5, 6, 8, 9, 0,, 5, 8, 4 Thermal Overload Protection Short-Circuit Protection Output Transistor Safe Operating
IRF510. 5.6A, 100V, 0.540 Ohm, N-Channel Power MOSFET. Features. Ordering Information. Symbol. Packaging. Data Sheet January 2002
IRF5 Data Sheet January 22 5.6A, V,.5 Ohm, N-Channel Power MOSFET This N-Channel enhancement mode silicon gate power field effect transistor is an advanced power MOSFET designed, tested, and guaranteed
FQP5N60C / FQPF5N60C N-Channel QFET MOSFET
FQP5N60C / FQPF5N60C N-Channel QFET MOSFET 600 V, 4.5 A,.5 Ω Description This N-Channel enhancement mode power MOSFET is produced using Fairchild Semiconductor s proprietary planar stripe and DMOS technology.
FODM3011, FODM3012, FODM3022, FODM3023, FODM3052, FODM3053 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
April 9 FODM311, FODM31, FODM3, FODM33, FODM35, FODM353 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers Features Compact 4-pin surface mount package (.4 mm maximum standoff
Features I-PAK (TO-251AA) T A=25 o C unless otherwise noted. Symbol Parameter Ratings Units
F62A/FU62A 2V N-Channel PowerTrench MOSFET General escription This N-Channel MOSFET has been designed specifically to improve the overall efficiency of C/C converters using either synchronous or conventional
DM74121 One-Shot with Clear and Complementary Outputs
June 1989 Revised July 2001 DM74121 One-Shot with Clear and Complementary Outputs General Description The DM74121 is a monostable multivibrator featuring both positive and negative edge triggering with
Data Sheet September 2004. Features. Packaging
HGTG3N6A4D Data Sheet September 24 6V, SMPS Series N-Channel IGBT with Anti-Parallel Hyperfast Diode The HGTG3N6A4D is a MOS gated high voltage switching devices combining the best features of MOSFETs
BDX33/A/B/C. Symbol Parameter Value Units V CBO Collector-Base Voltage : BDX33 : BDX33A : BDX33B : BDX33C
Power Linear and Switching Applications High Gain General Purpose Power Darlington TR Complement to BDX34/34A/34B/34C respectively 1 TO-220 1.Base 2.Collector 3.Emitter NPN Epitaxial Silicon Transistor
2N7000 / 2N7002 / NDS7002A N-Channel Enhancement Mode Field Effect Transistor
November 995 N7 / N7 / NS7A N-Channel Enhancement Mode Field Effect Transistor General escription Features These N-Channel enhancement mode field effect transistors are produced using Fairchild's proprietary,
MC14008B. 4-Bit Full Adder
4-Bit Full Adder The MC4008B 4bit full adder is constructed with MOS PChannel and NChannel enhancement mode devices in a single monolithic structure. This device consists of four full adders with fast
Symbol Parameter Ratings Units V DSS Drain-to-Source Voltage 80 V V GS Gate-to-Source Voltage ±20 V Drain Current - Continuous (V
FDBL8636_F85 N-Channel PowerTrench MOSFET 8 V, 3 A,.4 mω Features Typical R DS(on) =. mω at V GS = V, I D = 8 A Typical Q g(tot) = 72 nc at V GS = V, I D = 8 A UIS Capability RoHS Compliant Qualified to
DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs
DM9368 7-Segment Decoder/Driver/Latch with Constant Current Source Outputs General Description The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits
74F675A 16-Bit Serial-In, Serial/Parallel-Out Shift Register
74F675A 16-Bit Serial-In, Serial/Parallel-Out Shift Register General Description The 74F675A contai a 16-bit serial in/serial out shift register and a 16-bit parallel out storage register. Separate serial
TA = 25 C unless otherwise noted. Symbol Parameter Value Units
Discrete POWER & Signal Technologies C B E TO-92 NPN Darlington Transistor This device is designed for applications requiring extremely high current gain at currents to 1.0 A. Sourced from Process 05.
HCF4010B HEX BUFFER/CONVERTER (NON INVERTING)
HEX BUFFER/CONVERTER (NON INVERTING) PROPAGATION DELAY TIME: t PD = 50ns (Typ.) at V DD = 10V C L = 50pF HIGH TO LOW LEVEL LOGIC CONVERSION MULTIPLEXER: 1 TO 6 OR 6 TO 1 HIGH "SINK" AND "SOURCE" CURRENT
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer
MM74C150 MM82C19 16-Line to 1-Line Multiplexer 3-STATE 16-Line to 1-Line Multiplexer General Description The MM74C150 and MM82C19 multiplex 16 digital lines to 1 output. A 4-bit address code determines
Obsolete Product(s) - Obsolete Product(s)
SYNCHRONOUS PROGRAMMABLE 4-BIT BINARY COUNTER WITH ASYNCHRONOUS CLEAR INTERNAL LOOK-AHEAD FOR FAST COUNTING CARRY OUTPUT FOR CASCADING SYNCHRONOUSLY PROGRAMMABLE LOW-POWER TTL COMPATIBILITY STANDARDIZED
INTEGRATED CIRCUITS. 74LVC08A Quad 2-input AND gate. Product specification IC24 Data Handbook. 1997 Jun 30
INTEGRATED CIRCUITS IC24 Data Handbook 1997 Jun 30 FEATURES Wide supply voltage range of 1.2 V to 3.6 V In accordance with JEDEC standard no. 8-1A Inputs accept voltages up to 5.5 V CMOS low power consumption
HCF4001B QUAD 2-INPUT NOR GATE
QUAD 2-INPUT NOR GATE PROPAGATION DELAY TIME: t PD = 50ns (TYP.) at V DD = 10V C L = 50pF BUFFERED INPUTS AND OUTPUTS STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS QUIESCENT CURRENT SPECIFIED UP TO 20V
Si9953DY* Dual P-Channel Enhancement Mode MOSFET 9 '66 'UDLQ6RXUFHÃ9ROWDJH 9 9 *66 *DWH6RXUFHÃ9ROWDJH ± 9 Ã3XOVHG 3 '
Si9953DY* Dual P-Channel Enhancement Mode MOSFET 0.250 Ω 0.400 Ω ÃÃÃÃÃÃÃ7 $ R &ÃXQOHVVÃRWKHUZLVHÃQRWHG 9 '66 'UDLQ6RXUFHÃ9ROWDJH 9 9 *66 *DWH6RXUFHÃ9ROWDJH ± 9, ' 'UDLQÃ&XUUHQW Ã&RQWLQXRXVÃ ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ1RWHÃD
MC14175B/D. Quad Type D Flip-Flop
Quad Type D Flip-Flop The MC475B quad type D flipflop is cotructed with MOS Pchannel and Nchannel enhancement mode devices in a single monolithic structure. Each of the four flipflops is positiveedge triggered
FOD060L, FOD260L 3.3V/5V High Speed-10 MBit/s Logic Gate Optocouplers
FOD060L, FOD260L 3.3V/5V High Speed-0 MBit/s Logic Gate Optocouplers Features FOD060L in SO8 and FOD260L in 8-pin DIP Very high speed 0 MBit/s Superior CMR 50 kv/µs at,000v peak Fan-out of 8 over -40 C
CD4511BM CD4511BC BCD-to-7 Segment Latch Decoder Driver
CD4511BM CD4511BC BCD-to-7 Segment Latch Decoder Driver General Description The CD4511BM CD4511BC BCD-to-seven segment latch decoder driver is constructed with complementary MOS (CMOS) enhancement mode
MC14001B Series. B Suffix Series CMOS Gates MC14001B, MC14011B, MC14023B, MC14025B, MC14071B, MC14073B, MC14081B, MC14082B
MC4B Series BSuffix Series CMOS Gates MC4B, MC4B, MC4B, MC4B, MC4B, MC4B, MC4B, MC4B The B Series logic gates are constructed with P and N channel enhancement mode devices in a single monolithic structure
HEF4011B. 1. General description. 2. Features and benefits. 3. Ordering information. 4. Functional diagram. Quad 2-input NAND gate
Rev. 6 10 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input NAND gate. The outputs are fully buffered for the highest noise
4-bit binary full adder with fast carry CIN + (A1 + B1) + 2(A2 + B2) + 4(A3 + B3) + 8(A4 + B4) = = S1 + 2S2 + 4S3 + 8S4 + 16COUT
Rev. 03 11 November 2004 Product data sheet 1. General description 2. Features The is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). The is specified in compliance
HCF4028B BCD TO DECIMAL DECODER
BCD TO DECIMAL DECODER BCD TO DECIMAL DECODING OR BINARY TO OCTAL DECODING HIGH DECODED OUTPUT DRIVE CAPABILITY "POSITIVE LOGIC" INPUTS AND OUTPUTS: DECODED OUTPUTS GO HIGH ON SELECTION MEDIUM SPEED OPERATION
HCC4541B HCF4541B PROGRAMMABLE TIMER
HCC4541B HCF4541B PROGRAMMABLE TIMER 16 STAGE BINARI COUNTER LOW SYMMETRICAL OUTPUT RESISTANCE, TYPICALLY 100 OHM AT DD = 15 OSCILLATOR FREQUENCY RANGE : DC TO 100kHz AUTO OR MASTER RESET DISABLES OSCIL-
HCF4081B QUAD 2 INPUT AND GATE
QUAD 2 INPUT AND GATE MEDIUM SPEED OPERATION : t PD = 60ns (Typ.) at 10 QUIESCENT CURRENT SPECIFIED UP TO 20 5, 10 AND 15 PARAMETRIC RATINGS INPUT LEAKAGE CURRENT I I = 100nA (MAX) AT DD = 18 T A = 25
DM74157 Quad 2-Line to 1-Line Data Selectors/Multiplexers
DM74157 Quad 2-Line to 1-Line Data Selectors/Multiplexers General Description These data selectors/multiplexers contain inverters and drivers to supply full on-chip data selection to the four out-put gates.