Quik Setup Guide Strt Here DCP-9020CDW Plese red the Produt Sfety Guide first, then red this Quik Setup Guide for the orret setup nd instlltion proedure. To view the Quik Setup Guide in other lnguges, plese visit http://solutions.rother.om/. 1 Unpk the mhine nd hek the omponents Drum Unit nd Toner Crtridge Assemlies (pre-instlled) (Blk, Cyn, Mgent nd Yellow) Wste Toner Box (pre-instlled) CD-ROM AC Power Cord Belt Unit (pre-instlled) Produt Sfety Guide Quik Setup Guide UK/IRE Version 0 1
WARNING CAUTION WARNING indites potentilly hzrdous sitution whih, if not voided, ould result in deth or serious injuries. CAUTION indites potentilly hzrdous sitution whih, if not voided, my result in minor or moderte injuries. WARNING Plsti gs re used in the pking of your mhine. To void dnger of suffotion, keep these plsti gs wy from ies nd hildren. Plsti gs re not toys. This mhine is hevy nd weighs more thn 20.0 kg. To prevent possile injuries, t lest two people should lift the mhine. One person should hold the front of the mhine, nd one person should hold the k, s shown in the illustrtion elow. Be reful not to trp your fingers when you put the mhine down. Keep minimum gp round the mhine s shown in the illustrtion. 400 mm 150 mm 150 mm 150 mm The omponents inluded in the ox my differ depending on your ountry. We reommend tht you sve the originl pkging. If for ny reson you must ship your mhine, refully repk the mhine in the originl pkging to void ny dmge during trnsit. The mhine should e dequtely insured with the rrier. For detils on how to repk the mhine: uu Advned User's Guide: Pking nd shipping the mhine. The interfe le is not stndrd essory. Buy the pproprite interfe le for the onnetion you wnt to use (USB or Network). USB le We reommend using USB 2.0 le (Type A/B) tht is no longer thn 2 metres. DO NOT onnet the interfe le t this time. Conneting the interfe le is done during the MFL-Pro Suite instlltion proess. Network le Use stright-through Ctegory 5 (or greter) twisted-pir le for 10BASE-T or 100BASE-TX Fst Ethernet Network. 2
2 Remove the pking mteril from the mhine d Tke out ll four drum nd toner rtridge ssemlies. CAUTION DO NOT et the sili gel pk, plese throw it wy. If ingested, seek medil ttention immeditely. DO NOT onnet the AC power ord yet. Remove the pking tpe from the outside of the mhine, the sili gel pk on the support flp nd the film overing the snner glss. Fully open the top over y lifting the hndle up. To void print qulity prolems, DO NOT touh the shded prt shown in the illustrtion. e Remove the ornge pking piee from the elt unit. Slide ll eight yellow drum loks in the diretion of the rrows (the loks my require firm push). 3
f Remove the ornge pking piee from eh drum nd toner rtridge ssemly. h Slide ll four drum nd toner rtridge ssemlies into the mhine. Mke sure the toner rtridge olour mthes the sme olour lel on the mhine. BK C M Y g Using oth hnds, hold eh drum nd toner rtridge ssemly level, nd gently shke it from side to side severl times to distriute the toner evenly inside the ssemly. i BK - Blk M - Mgent C - Cyn Y - Yellow Close the top over of the mhine. 4
3 Lod pper in the pper try Pull the pper try ompletely out of the mhine. d Lod pper in the try nd mke sure: The pper is elow the mximum pper mrk (). Overfilling the pper try will use pper jms. The side to e printed on is fe down. The pper guides touh the sides of the pper so it will feed orretly. While pressing the green pper-guide relese lever, slide the pper guides to fit the pper size you re loding in the try. Mke sure the guides re firmly in the slots. e f Put the pper try firmly k in the mhine. Mke sure it is ompletely inserted into the mhine. Lift the support flp to prevent pper from sliding off the fe-down output try. Fn the stk of pper well to void pper jms nd misfeeds. For informtion out reommended pper: uu Bsi User's Guide: Reommended pper nd print medi. 5
4 Connet the power ord DO NOT onnet the interfe le yet. 5 Choose your lnguge After turning on the mhine, the Touhsreen displys: Connet the AC power ord to the mhine nd then plug it into n eletril soket. Press on the ontrol pnel. DO NOT touh the Touhsreen immeditely fter plugging in the power ord or turning the mhine on. Doing this my use n error. Swipe up or down, or press or to disply your lnguge, nd press your lnguge. Press OK. The Touhsreen prompts you to onfirm your seletion. If the Touhsreen shows the orret lnguge, press Yes. OR Press No to go k to step to hoose the lnguge gin. If you hve set the wrong lnguge, you n hnge the lnguge from the utton on the Touhsreen. (, All Settings, Initil Setup, Lol Lnguge) 6
6 Set the dte nd time 7 Automti Dylight Sving Time Press. d Press (Dte & Time). Press Dte. Enter the lst two digits of the yer using the numers on the Touhsreen, nd then press OK. You n set the mhine to hnge utomtilly for Dylight Sving Time. It will reset itself forwrd one hour in the spring nd kwrd one hour in the utumn. Press. d Press (Dte & Time). Press Auto Dylight. Press On (or Off). e Press. e f g h (e.g., Enter 1, 3 for 2013.) Enter the two digits for the month using the numers on the Touhsreen, nd then press OK. Enter the two digits for the dy using the numers on the Touhsreen, nd then press OK. Press Time. Enter the time in 24-hour formt using the numers on the Touhsreen, nd then press OK. i Press. 7
8 Set the Time Zone You n set the time zone on the mhine for your lotion. Press. d Press (Dte & Time). Press Time Zone. Enter your time zone. Press OK. e Press. 8
9 Choose your onnetion type These instlltion instrutions re for Windows XP Home/Windows XP Professionl, Windows XP Professionl x64 Edition, Windows Vist, Windows 7, Windows 8, nd M OS X v10.6.8, 10.7.x nd 10.8.x. For Windows Server 2003/2003 x64 Edition/2008/2008 R2/2012 nd Linux, visit your model pge t http://solutions.rother.om/. You n visit us t http://solutions.rother.om/ where you n get produt support, the ltest driver updtes nd utilities, nd nswers to frequently sked questions (FAQs). For USB Interfe Cles Windows, go to pge 10 Mintosh, go to pge 12 For Wired Network Windows, go to pge 14 Mintosh, go to pge 17 For Wireless Network Windows nd Mintosh, go to pge 19 To onnet your ios devie, Android devie, or Windows Phone to your Brother mhine using Wi-Fi Diret, plese downlod the Wi-Fi Diret Guide t http://solutions.rother.om/. Wired Network Wireless Network Windows USBMintosh Windows Mintosh Windows Mintosh 9
USB Windows For Windows USB Interfe Users (Windows XP/XP Professionl x64 Edition/Windows Vist / Windows 7/Windows 8) 10 Before you instll 11 Instll MFL-Pro Suite If there re ny progrms running, lose them. The sreens my differ depending on your operting system. The CD-ROM inludes Nune PperPort 12SE. This softwre supports Windows XP (SP3 or greter), XP Professionl x64 Edition (SP2 or greter), Windows Vist (SP2 or greter), Windows 7 nd Windows 8. Updte to the ltest Windows Servie Pk efore instlling MFL-Pro Suite. Mke sure your omputer is ON nd you re logged on with Administrtor rights. Press nd hold down to turn off the mhine, nd mke sure the USB interfe le is NOT onneted. If you hve lredy onneted the le, disonnet it. Put the CD-ROM into your CD-ROM drive. If the model nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen does not pper utomtilly, go to Computer (My Computer). (For Windows 8: lik the (File Explorer) ion on the tskr, nd then go to Computer.) Doule-lik the CD-ROM ion, nd then doule-lik strt.exe. If the User Aount Control sreen ppers, lik Continue or Yes. Clik Instll MFL-Pro Suite, nd lik Yes in the next two windows if you ept the liense greements. If the instlltion does not ontinue utomtilly, restrt the instlltion y ejeting nd then reinserting the CD-ROM or y doule-liking the strt.exe progrm from the root folder. Continue from step to instll MFL-Pro Suite. Choose Lol Connetion (USB), nd then lik Next. To instll the PS driver (BR-Sript3 printer driver), hoose Custom Instll, nd then follow the on-sreen instrutions. 10
USB Windows d Follow the on-sreen instrutions until the Plug in the USB le sreen ppers. 12 Finish nd restrt Clik Finish to restrt your omputer. After restrting the omputer, you must log on with Administrtor rights. e Connet the USB le to the USB port mrked with the symol on your mhine, nd then onnet the le to your omputer. f Press to turn on the mhine. The instlltion will utomtilly ontinue. The instlltion sreens pper one fter nother. If prompted, follow ny on-sreen instrutions. If n error messge ppers during the softwre instlltion, do one of the following: - For Windows XP, Windows Vist nd Windows 7 users: run the Instlltion Dignostis loted in (Strt) > All Progrms > Brother > DCP-XXXX (where DCP-XXXX is your model nme). - For Windows 8 users: to run Instlltion Dignostis, doule-lik the (Brother Utilities) ion on the desktop, nd then lik the drop-down list nd selet your model nme (if not lredy seleted). Clik Tools in the left nvigtion r. Depending on your seurity settings when using the mhine or its softwre, Windows Seurity or ntivirus softwre window my pper. Plese llow or permit the window to ontinue. Windows USBMintosh DO NOT nel ny of the sreens during the instlltion. It my tke few minutes for ll sreens to pper. g h When the On-Line Registrtion sreen ppers, mke your seletion nd follow the on-sreen instrutions. One you hve ompleted the registrtion proess, lik Next. When the Setup is Complete sreen ppers, mke your seletion, nd then lik Next. Finish The instlltion is now omplete. For Windows 8 users: if the Brother mnuls inluded on the CD-ROM re in PDF formt, use Adoe Reder to open them. If Adoe Reder is instlled on your omputer ut nnot open the files in Adoe Reder, hnge the file ssoition for PDF (see How to open PDF file in Adoe Reder (Windows 8) uu pge 38). XML Pper Speifition Printer Driver The XML Pper Speifition Printer Driver is the most suitle driver for Windows Vist, Windows 7 nd Windows 8 when printing from pplitions tht use the XML Pper Speifition. Plese downlod the ltest driver from the Brother Solutions Center t http://solutions.rother.om/. 11
USB Mintosh For Mintosh USB Interfe Users (M OS X v10.6.8, 10.7.x, 10.8.x) 10 Before you instll 11 Instll MFL-Pro Suite For M OS X v10.6.7 or lower users: upgrde to M OS X v10.6.8, 10.7.x, 10.8.x. (For the ltest drivers nd informtion for the M OS X you re using, visit http://solutions.rother.om/.) Put the CD-ROM into your CD-ROM drive, nd then doule-lik the BROTHER ion on your desktop. Doule-lik the Strt Here OSX ion. If prompted, selet your model. Mke sure your mhine is onneted to n AC power soure nd your Mintosh is ON. You must e logged on with Administrtor rights. Connet the USB le to the USB port mrked with the symol on your mhine, nd then onnet the le to your Mintosh. d Choose Lol Connetion (USB), nd then lik Next. The instlltion sreens pper one fter nother. If prompted, follow ny on-sreen instrutions. Mke sure your mhine is turned on. DO NOT nel ny of the sreens during the instlltion. It my tke few minutes for the instlltion to omplete. e Choose your mhine from the list, nd then lik Next. f g When the Add Printer sreen ppers, lik Add Printer. Choose your mhine from the list, lik Add, nd then lik Next. To dd the PS driver (BR-Sript3 printer driver), selet it from the Print Using (Use) pop-up menu. The instlltion of MFL-Pro Suite is now omplete. Go to step 12 on pge 13. 12
USB Mintosh 12 Downlod nd instll Presto! PgeMnger When Presto! PgeMnger is instlled, OCR pility is dded to Brother ControlCenter2. You n esily sn, shre nd orgnize photos nd douments using Presto! PgeMnger. On the Brother Support sreen, lik Presto! PgeMnger nd follow the on-sreen instrutions. Finish The instlltion is now omplete. Windows USBMintosh 13
Wired Network Windows For Windows Wired Network Interfe Users (Windows XP/XP Professionl x64 Edition/Windows Vist / Windows 7/Windows 8) 10 Before you instll Connet the network interfe le to the Ethernet port on your mhine, nd then onnet it to free port on your hu. If there re ny progrms running, lose them. The sreens my differ depending on your operting system. The CD-ROM inludes Nune PperPort 12SE. This softwre supports Windows XP (SP3 or greter), XP Professionl x64 Edition (SP2 or greter), Windows Vist (SP2 or greter), Windows 7 nd Windows 8. Updte to the ltest Windows Servie Pk efore instlling MFL-Pro Suite. Disle ll personl firewll softwre (other thn Windows Firewll), nti-spywre, or ntivirus pplitions for the durtion of the instlltion. Mke sure your omputer is ON nd you re logged on with Administrtor rights. Remove the protetive p from the Ethernet port mrked with symol on your mhine. d 11 Mke sure your mhine is turned on. Instll MFL-Pro Suite Put the CD-ROM into your CD-ROM drive. If the model nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen does not pper utomtilly, go to Computer (My Computer). (For Windows 8: lik the (File Explorer) ion on the tskr, nd then go to Computer.) Doule-lik the CD-ROM ion, nd then doule-lik strt.exe. If the User Aount Control sreen ppers, lik Continue or Yes. Clik Instll MFL-Pro Suite, nd lik Yes in the next two windows if you ept the liense greements. 14 If the instlltion does not ontinue utomtilly, restrt the instlltion y ejeting nd then reinserting the CD-ROM or y doule-liking the strt.exe progrm from the root folder. Continue from step to instll MFL-Pro Suite.
Wired Network Windows Choose Wired Network Connetion (Ethernet), nd then lik Next. To instll the PS driver (BR-Sript3 printer driver), hoose Custom Instll, nd then follow the on-sreen instrutions. f g When the On-Line Registrtion sreen ppers, mke your seletion nd follow the on-sreen instrutions. One you hve ompleted the registrtion proess, lik Next. When the Setup is Complete sreen ppers, mke your seletion, nd then lik Next. d When the Firewll/AntiVirus deteted sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion nd ontinue with the instlltion. (Reommended) nd lik Next. 12 Finish nd restrt Clik Finish to restrt your omputer. After restrting the omputer, you must log on with Administrtor rights. If n error messge ppers during the softwre instlltion, do one of the following: - For Windows XP, Windows Vist nd Windows 7 users: run the Instlltion Dignostis loted in (Strt) > All Progrms > Brother > DCP-XXXX LAN (where DCP-XXXX is your model nme). - For Windows 8 users: to run Instlltion Dignostis, doule-lik the (Brother Utilities) ion on the desktop, nd then lik the drop-down list nd selet your model nme (if not lredy seleted). Clik Tools in the left nvigtion r. Depending on your seurity settings when using the mhine or its softwre, Windows Seurity or ntivirus softwre window my pper. Plese llow or permit the window to ontinue. e If you re not using the Windows Firewll, see the user s guide for your softwre for informtion on how to dd the following network ports: For network snning, dd UDP port 54925. If you still hve troule with your network onnetion, dd UDP ports 161 nd 137. The instlltion will utomtilly ontinue. The instlltion sreens pper one fter nother. If prompted, follow ny on-sreen instrutions. DO NOT nel ny of the sreens during the instlltion. It my tke few minutes for ll sreens to pper. If prompted, hoose your mhine from the list, nd then lik Next. If your mhine is not found over the network, onfirm your settings y following the on-sreen instrutions. If there is more thn one of the sme model onneted on your network, the IP Address nd Node Nme will e displyed to help you identify the mhine. You n find your mhine s IP ddress nd the Node Nme y printing out the Network Configurtion Report (see Print the Network Configurtion Report uu pge 37). If the Windows Seurity sreen ppers, selet the hek ox nd lik Instll to omplete the instlltion orretly. Wired Network Windows Mintosh 15
Wired Network Windows 13 Instll MFL-Pro Suite on dditionl omputers (if needed) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 10 on pge 14. Network liense (Windows ) This produt inludes PC liense for up to five users. This liense supports the instlltion of the MFL-Pro Suite inluding Nune PperPort 12SE on up to five PCs on the network. If you wnt to use more thn five PCs with Nune PperPort 12SE instlled, plese purhse the Brother NL-5 pk whih is multiple PC liense greement pk for up to five dditionl users. To purhse the NL-5 pk, ontt your uthorized Brother deler or ontt Brother ustomer servie. Finish The instlltion is now omplete. For Windows 8 users: if the Brother mnuls inluded on the CD-ROM re in PDF formt, use Adoe Reder to open them. If Adoe Reder is instlled on your omputer ut nnot open the files in Adoe Reder, hnge the file ssoition for PDF (see How to open PDF file in Adoe Reder (Windows 8) uu pge 38). XML Pper Speifition Printer Driver The XML Pper Speifition Printer Driver is the most suitle driver for Windows Vist, Windows 7 nd Windows 8 when printing from pplitions tht use the XML Pper Speifition. Plese downlod the ltest driver from the Brother Solutions Center t http://solutions.rother.om/. 16
Wired Network Mintosh For Mintosh Wired Network Interfe Users (M OS X v10.6.8, 10.7.x, 10.8.x) 10 Before you instll 11 Instll MFL-Pro Suite For M OS X v10.6.7 or lower users: upgrde to M OS X v10.6.8, 10.7.x, 10.8.x. (For the ltest drivers nd informtion for the M OS X you re using, visit http://solutions.rother.om/.) Put the CD-ROM into your CD-ROM drive, nd then doule-lik the BROTHER ion on your desktop. Doule-lik the Strt Here OSX ion. If prompted, selet your model. Mke sure your mhine is onneted to n AC power soure nd your Mintosh is ON. You must e logged on with Administrtor rights. Remove the protetive p from the Ethernet port mrked with mhine. symol on your d Choose Wired Network Connetion (Ethernet), nd then lik Next. The instlltion sreens pper one fter nother. If prompted, follow ny on-sreen instrutions. Connet the network interfe le to the Ethernet port on your mhine, nd then onnet it to free port on your hu. DO NOT nel ny of the sreens during the instlltion. It my tke few minutes for the instlltion to omplete. e Choose your mhine from the list, nd then lik Next. Wired Network Windows Mintosh d Mke sure your mhine is turned on. If your mhine is not found over the network, onfirm your network settings (see Before you instll uu pge 17). 17
Wired Network Mintosh If there is more thn one of the sme model onneted on your network, the IP Address will e displyed to help you identify the mhine. You n find your mhine s IP Address y printing out the Network Configurtion Report (see Print the Network Configurtion Report uu pge 37). If the Setup Network "Sn to" nme sreen ppers, follow the instrutions elow: 12 Downlod nd instll Presto! PgeMnger When Presto! PgeMnger is instlled, OCR pility is dded to Brother ControlCenter2. You n esily sn, shre nd orgnize photos nd douments using Presto! PgeMnger. On the Brother Support sreen, lik Presto! PgeMnger nd follow the on-sreen instrutions. 1) Enter nme for your Mintosh (up to 15 hrters long). 2) Clik Next. Go to f. f g The nme you enter will pper on the mhine s Touhsreen when you press the Sn utton nd hoose sn option (for more informtion: uu Softwre User's Guide). When the Add Printer sreen ppers, lik Add Printer. Choose your mhine from the list, lik Add, nd then lik Next. (OS X v10.8.x) Selet DCP-XXXX CUPS driver from the Use pop-up menu (where XXXX is your model nme). 13 Instll MFL-Pro Suite on dditionl omputers (if needed) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 10 on pge 17. Finish The instlltion is now omplete. To dd the PS driver (BR-Sript3 printer driver), selet it from the Print Using (Use) pop-up menu. The instlltion of MFL-Pro Suite is now omplete. Go to step 12 on pge 18. 18
For Wireless Network Users For Wireless Network Interfe Users 10 Before you egin First you must onfigure the wireless network settings of your mhine to ommunite with your wireless ess point/router. After the mhine is onfigured to ommunite with your wireless ess point/router, the omputers nd moile devies on your network will hve ess to the mhine. To use the mhine from omputer, you must instll the drivers nd softwre. The following steps will guide you through the onfigurtion nd instlltion proess: If you re going to onnet the mhine to your network, we reommend tht you ontt your system dministrtor prior to instlltion. You must know your wireless network settings efore you proeed with this instlltion. If you hve previously onfigured the wireless settings of the mhine, you must reset the network settings efore you n onfigure the wireless settings gin. 1. On your mhine, press, nd All Settings. 2. Swipe up or down, or press or to disply Network, nd press Network. 3. Swipe up or down, or press or to disply Network Reset, nd press Network Reset. 4. Press Yes. 5. Press Yes for two seonds. To hieve optimum results with norml everydy doument printing, ple the Brother mhine s lose to the wireless ess point/router s possile, with miniml ostrutions. Lrge ojets nd wlls etween the two devies nd interferene from other eletroni devies n ffet the dt trnsfer speed of your douments. Due to these ftors, wireless my not e the est method of onnetion for ll types of douments nd pplitions. If you re printing lrge files, suh s multi-pge douments with mixed text nd lrge grphis, you my wnt to onsider hoosing wired Ethernet for fster dt trnsfer or USB for the fstest throughput speed. Although the Brother DCP-9020CDW n e used in oth wired nd wireless network, only one of the onnetion methods n e used t time. If you use your mhine in n IEEE 802.1x supported wireless network: uu Network User's Guide: Using IEEE 802.1x uthentition. Infrstruture Mode Wireless ess point/router Wireless Network mhine (your mhine) Wireless ple omputer onneted to the wireless ess point/router d Wired omputer onneted to the wireless ess point/router e Moile devie onneted to the wireless ess point/router Wireless Network Windows Mintosh 19
For Wireless Network Users 11 Choose your wireless setup method The following instrutions will offer three methods for setting up your Brother mhine on wireless network. Choose the method you prefer for your environment. For methods nd, strt your wireless setup y pressing the utton on the Touhsreen. Setup using the CD-ROM nd temporrily using USB le (Windows nd Mintosh) We reommend using omputer wirelessly onneted to your network for this method. You need to temporrily use USB le during onfigurtion (le not inluded). If you re using Windows XP, or using network le to onnet your omputer to your wireless ess point/router, you need to know the SSID (Network Nme) nd Network Key of your wireless ess point/router efore you proeed. Plese write down your wireless network settings in the re elow. If you need ssistne during setup nd wnt to ontt Brother Customer Servie, mke sure you hve your SSID nd Network Key redy. We nnot ssist you in loting this informtion. Item SSID (Network Nme) Network Key* (Seurity Key/Enryption Key) Reord the urrent wireless network settings * The Network Key my lso e desried s the Pssword, Seurity Key, or Enryption Key. If you do not know this informtion (SSID nd Network Key), you nnot ontinue the wireless setup. To find this informtion (SSID nd Network Key): 1. Chek the doumenttion provided with your wireless ess point/router. 2. The defult SSID ould e the ess point/router mnufturer's nme or the model nme. 3. If you do not know the seurity informtion, plese onsult the router mnufturer, your system dministrtor, or your internet provider. Now go to pge 22 20
For Wireless Network Users Mnul setup from the ontrol pnel using the Setup Wizrd (Windows, Mintosh nd moile devies) If your wireless ess point/router does not support WPS (Wi-Fi Proteted Setup ) or AOSS, write down the wireless network settings of your wireless ess point/router in the re elow. If you need ssistne during setup nd wnt to ontt Brother Customer Servie, mke sure you hve your SSID (Network Nme) nd Network Key redy. We nnot ssist you in loting this informtion. Item SSID (Network Nme) Network Key* (Seurity Key/Enryption Key) Reord the urrent wireless network settings * The Network Key my lso e desried s the Pssword, Seurity Key, or Enryption Key. If you do not know this informtion (SSID nd Network Key), you nnot ontinue the wireless setup. To find this informtion (SSID nd Network Key): 1. Chek the doumenttion provided with your wireless ess point/router. 2. The defult SSID ould e the ess point/router mnufturer's nme or the model nme. 3. If you do not know the seurity informtion, plese onsult the router mnufturer, your system dministrtor, or your internet provider. Now go to pge 25 One-push setup using WPS or AOSS (Windows, Mintosh nd moile devies) Use this method if your wireless ess point/router supports utomti wireless (one-push) setup (WPS or AOSS ). Now go to pge 27 Wireless Network Windows Mintosh 21
For Wireless Network Users Setup using the CD-ROM nd temporrily using USB le (Windows nd Mintosh) 12 Set up the wireless settings (Windows ) Clik Instll MFL-Pro Suite, nd lik Yes in the next two windows if you ept the liense greements. You need to temporrily use USB le during onfigurtion (le not inluded). If you re using Windows XP, or using network le to onnet your omputer to your wireless ess point/router, you need to know the SSID nd Network Key of your wireless ess point/router tht you wrote down in step 11- on pge 20 efore you proeed. If you use your mhine in n IEEE 802.1x supported wireless network: uu Network User's Guide: Using IEEE 802.1x uthentition. The sreens in this step re from Windows. The sreens on your omputer will vry depending on your operting system. Put the CD-ROM into your CD-ROM drive. (Windows ) If the model nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen does not pper utomtilly, go to Computer (My Computer). (For Windows 8: lik the (File Explorer) ion on the tskr, nd then go to Computer.) Doule-lik the CD-ROM ion, nd then doule-lik strt.exe. If the User Aount Control sreen ppers, lik Continue or Yes. If the instlltion does not ontinue utomtilly, restrt the instlltion y ejeting nd then reinserting the CD-ROM or y doule-liking the strt.exe progrm from the root folder. Continue from step to instll MFL-Pro Suite. (Mintosh) Doule-lik the BROTHER ion on your desktop, nd then doule-lik the Strt Here OSX ion on the sreen. If prompted, selet your model. Choose Wireless Network Connetion, nd then lik Next. For Windows, go to d For Mintosh, go to e (Windows ) To instll the PS driver (BR-Sript3 printer driver), hoose Custom Instll, nd then follow the on-sreen instrutions. 22
For Wireless Network Users d When the Firewll/AntiVirus deteted sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion nd ontinue with the instlltion. (Reommended) nd lik Next. h Chek Yes if you wnt to onnet with the listed SSID. Clik Next, nd then go to k. e f If you re not using the Windows Firewll, see the user s guide for your softwre for informtion on how to dd the following network ports: For network snning, dd UDP port 54925. If you still hve troule with your network onnetion, dd UDP ports 161 nd 137. Choose Yes, I hve USB le to use for instlltion., nd then lik Next. If the Importnt Notie sreen ppers, red the notie. Chek the ox fter you onfirm the SSID nd Network Key, nd then lik Next. Temporrily onnet the USB le (not inluded) diretly to the omputer nd the mhine. i j The wizrd will serh for ville wireless networks from your mhine. Choose the SSID tht you wrote down for your network in step 11- on pge 20, nd then lik Next. If the list is lnk, hek tht the wireless ess point/router hs power nd is rodsting the SSID. See if the mhine nd the wireless ess point/router re within rnge for wireless ommunition. Clik Refresh. If your wireless ess point/router is set to not rodst the SSID, mnully dd it y liking the Advned utton. Follow the on-sreen instrutions for entering the Nme(SSID), nd then lik Next. Enter the Network Key you wrote down in step 11- on pge 20, nd then lik Next. g Do one of the following: If the Instlltion onfirmtion sreen ppers, hek the ox nd lik Next, nd then go to h. If the Instlltion onfirmtion sreen does not pper, go to i. If your network is not onfigured for Authentition nd Enryption, the ATTENTION! sreen will pper. To ontinue onfigurtion, lik OK. Wireless Network Windows Mintosh 23
For Wireless Network Users k Confirm the wireless network settings, nd then lik Next. The settings will e sent to your mhine. l The settings will remin unhnged if you lik Cnel. To mnully enter the IP ddress settings of your mhine, lik Chnge IP Address nd enter the neessry IP ddress settings for your network. If the wireless setup filure sreen ppers, lik Retry. Disonnet the USB le etween the omputer nd the mhine, nd then lik Next. Wireless setup is now omplete. A four-level inditor t the top right of your mhine s Touhsreen will show the wireless signl strength of your wireless ess point/router. To instll the MFL-Pro Suite, ontinue to step 14. For Windows Users: Now go to step 14-e on pge 33 For Mintosh Users: Now go to step 14-d on pge 35 24
For Wireless Network Users Mnul setup from the ontrol pnel using the Setup Wizrd (Windows, Mintosh nd moile devies) 12 Set up the wireless settings You must hve the wireless settings you wrote down for your network in step 11- on pge 21 efore you proeed. If you use your mhine in n IEEE 802.1x supported wireless network: uu Network User's Guide: Using IEEE 802.1x uthentition. On your mhine, press. Press Setup Wizrd. d When Enle WLAN? is displyed, press Yes. This will strt the wireless setup wizrd. The mhine will serh for ville SSIDs. It will tke few minutes to disply list of ville SSIDs. If list of SSIDs is displyed, swipe up or down, or press or to hoose the SSID you wrote down in step 11- on pge 21. Press OK. If the list is lnk, hek tht the wireless ess point/router hs power nd is rodsting the SSID. Move your mhine loser to the wireless ess point/router nd try strting from gin. If your wireless ess point/router is set to not rodst the SSID you will hve to mnully dd the SSID nme. For detils: uu Network User's Guide: Configuring your mhine when the SSID is not rodst. Do one of the following: If the wireless ess point/router of the seleted SSID supports WPS nd the mhine sks to use WPS, go to e. If you re using n uthentition nd enryption method tht requires Network Key, go to f. If your uthentition method is Open System nd your enryption mode is None, go to g. e f g To onnet your mhine using the utomti wireless mode, press Yes. (If you hoose No (Mnul), go to f to enter the Network Key.) When the Touhsreen instruts you to strt WPS, press the WPS utton on your wireless ess point/router, nd then press Next on the Touhsreen. Go to g. Enter the Network Key you wrote down in step 11- on pge 21 using the numers nd hrters on the Touhsreen. To enter numers or speil hrters, press repetedly until the hrter you wnt to enter ppers, then press the hrter you wnt. If you entered hrter inorretly nd wnt to hnge it, press d or to move the ursor to the inorret hrter, then press. To enter spe, press Spe. For more detils, see Entering Text uu pge 31. Press OK when you hve entered ll the hrters, nd then press Yes to pply your settings. Your mhine will now try to onnet to your wireless network using the informtion you hve entered. A onnetion result messge ppers on the Touhsreen nd WLAN report will utomtilly print. If the onnetion filed, hek the error ode on the printed report nd refer to Trouleshooting uu pge 28. Press OK. Wireless setup is now omplete. A four-level inditor t the top right of your mhine s Touhsreen will show the wireless signl strength of your wireless ess point/router. Wireless Network Windows Mintosh 25
For Wireless Network Users To instll the MFL-Pro Suite, ontinue to step 13. For Windows Users: Now go to pge 32 For Mintosh Users: Now go to pge 35 For moile devie users, see the Advned Network User's Guides for detils on how to use your mhine with your moile devie(s). To downlod the User s Guide for the pplition you re using, visit the Brother Solutions Center t http://solutions.rother.om/ nd lik Mnuls on your model's pge. 26
For Wireless Network Users 12 One-push setup using WPS (Wi-Fi Proteted Setup) or AOSS (Windows, Mintosh nd moile devies) Configure the wireless settings Confirm tht your wireless ess point/router hs the WPS or AOSS symol s shown elow. Ple the Brother mhine within rnge of your WPS or AOSS ess point/router. The rnge my differ depending on your environment (see the instrutions provided with your wireless ess point/router). f A onnetion result messge ppers on the Touhsreen nd WLAN report will utomtilly print. If the onnetion filed, hek the error ode on the printed report nd refer to Trouleshooting uu pge 28. Press OK. Wireless setup is now omplete. A four-level inditor t the top right of your mhine s Touhsreen will show the wireless signl strength of your wireless ess point/router. To instll the MFL-Pro Suite, ontinue to step 13. For Windows Users: On your mhine, press. Press WPS/AOSS. d e When Enle WLAN? is displyed, press Yes. This will strt the wireless setup wizrd. When the Touhsreen instruts you to strt WPS or AOSS, press the WPS or AOSS utton on your wireless ess point/router (for more informtion, see the instrutions provided with your wireless ess point/router), nd then press OK on your mhine. Now go to pge 32 For Mintosh Users: Now go to pge 35 For moile devie users, see the Advned Network User's Guides for detils on how to use your mhine with your moile devie(s). To downlod the User s Guide for the pplition you re using, visit the Brother Solutions Center t http://solutions.rother.om/ nd lik Mnuls on your model's pge. This feture will utomtilly detet whih mode (WPS or AOSS ) your wireless ess point/router uses to onfigure your mhine. If your wireless ess point/router supports WPS nd you wnt to onfigure your mhine using the PIN (Personl Identifition Numer) Method: uu Network User's Guide: Configurtion using the PIN Method of WPS (Wi-Fi Proteted Setup). Wireless Network Windows Mintosh 27
For Wireless Network Users Trouleshooting If you need ssistne during setup nd wnt to ontt Brother Customer Servie, mke sure you hve your SSID (Network Nme) nd Network Key redy. We nnot ssist you in loting this informtion. To find the wireless settings (SSID (Network Nme) nd Network Key)* 1. Chek the doumenttion provided with your wireless ess point/router. 2. The defult SSID ould e the ess point/router mnufturer's nme or the model nme. 3. If you do not know the seurity informtion, plese onsult the router mnufturer, your system dministrtor, or your internet provider. * The Network Key my lso e desried s the Pssword, Seurity Key, or Enryption Key. * If the wireless ess point/router is set not to rodst the SSID, the SSID will not e deteted utomtilly. You must mnully enter the SSID nme (uu Network User's Guide: Configuring your mhine when the SSID is not rodst). WLAN report If the printed WLAN report shows tht the onnetion filed, hek the error ode on the printed report nd refer to the following instrutions: Error Code TS-01 TS-02 Reommended Solutions The wireless setting is not tivted, turn the wireless setting to ON. - If LAN le is onneted to your mhine, disonnet it nd turn the wireless setting of your mhine to ON. 1. On your mhine, press. 2. Press Network. 3. Press WLAN, nd then press Setup Wizrd. 4. When Enle WLAN? is displyed, press Yes. This will strt the wireless setup wizrd. The wireless ess point/router nnot e deteted. - Chek the following four points: 1. Mke sure the wireless ess point/router is powered on. 2. Move your mhine to n ostrution-free re, or loser to the wireless ess point/router. 3. Temporrily ple your mhine within out one metre from the wireless ess point/router when you re onfiguring the wireless settings. 4. If your wireless ess point/router is using MAC ddress filtering, onfirm tht the MAC ddress of the Brother mhine is llowed in the filter (see Print the Network Configurtion Report uu pge 37). - If you mnully entered the SSID nd seurity informtion (SSID/uthentition method/enryption method/network Key), the informtion my e inorret. Confirm the SSID nd seurity informtion (see To find the wireless settings (SSID (Network Nme) nd Network Key)* uu pge 28). Re-enter the orret informtion, if neessry. 28
For Wireless Network Users Error Code TS-03 Reommended Solutions The wireless network nd seurity setting you entered my e inorret. Confirm tht the wireless network settings re orret (see To find the wireless settings (SSID (Network Nme) nd Network Key)* uu pge 28). * Chek if the entered or seleted SSID/uthentition method/enryption method/network Key re orret. The uthentition/enryption methods used y the seleted wireless ess point/router re not supported y your mhine. For infrstruture mode, hnge the uthentition nd enryption methods of the wireless ess point/router. Your mhine supports the following uthentition methods WPA, WPA2, OPEN nd Shred key. WPA supports TKIP or AES enryption methods. WPA2 supports AES for the enryption method. OPEN nd Shred key orrespond to WEP enryption. If your prolem is not solved, the SSID or network settings you entered my e inorret. Confirm tht the wireless network settings re orret (see To find the wireless settings (SSID (Network Nme) nd Network Key)* uu pge 28). TS-04 Comined tle of uthentition nd enryption methods Authentition method WPA-Personl WPA2-Personl OPEN Shred key Enryption method TKIP AES AES WEP NONE (without enryption) WEP For d-ho mode, hnge the uthentition nd enryption methods of your omputer for the wireless setting. Your mhine supports OPEN uthentition method only, with optionl WEP enryption. The seurity informtion (SSID/Network Key) is inorret. TS-05 Confirm tht the SSID nd seurity informtion (Network Key) re orret (see To find the wireless settings (SSID (Network Nme) nd Network Key)* uu pge 28). If your router uses WEP enryption, enter the key used s the first WEP key. Your mhine supports the use of the first WEP key only. The wireless seurity informtion (uthentition method/enryption method/network Key) is inorret. TS-06 Confirm the wireless seurity informtion s shown in the Comined tle of uthentition nd enryption methods tle in error TS-04. If your router uses WEP enryption, enter the key used s the first WEP key. Your mhine supports the use of the first WEP key only. Confirm the Network Key (see To find the wireless settings (SSID (Network Nme) nd Network Key)* uu pge 28). Wireless Network Windows Mintosh 29
For Wireless Network Users Error Code Reommended Solutions The mhine nnot detet wireless ess point/router tht hs WPS or AOSS enled. To onfigure your wireless settings using WPS or AOSS, you must operte oth your mhine nd the wireless ess point/router. Confirm your wireless ess point/router supports WPS or AOSS nd try strting gin. TS-07 If you do not know how to operte your wireless ess point/router using WPS or AOSS, see the doumenttion provided with your wireless ess point/router, sk the mnufturer of your wireless ess point/router, or sk your network dministrtor. Two or more wireless ess points/routers tht hve WPS or AOSS enled re deteted. TS-08 - Confirm tht only one wireless ess point/router within rnge hs WPS or AOSS tive nd try gin. - Try strting gin fter few minutes in order to void interferene from other wireless ess points/routers. 30
For Wireless Network Users Entering Text When you re setting ertin menu seletions, you my need to enter text into the mhine. Press repetedly to hoose etween letters, numers nd speil hrters. Press to hnge etween upper se nd lower se. Inserting spes To enter spe, press Spe. Mking orretions If you entered hrter inorretly nd wnt to hnge it, press d or to move the ursor under the inorret hrter, nd then press. Enter the orret hrter. The hrters ville my differ depending on your ountry. The keyord lyout my differ depending on the funtion you re setting. Windows Mintosh Wireless Network 31
Wireless Network Windows Instll the Drivers nd Softwre (Windows XP/XP Professionl x64 Edition/Windows Vist / Windows 7/Windows 8) 13 Before you instll Clik Instll MFL-Pro Suite, nd lik Yes in the next two windows if you ept the liense greements. If there re ny progrms running, lose them. The sreens my differ depending on your operting system. The CD-ROM inludes Nune PperPort 12SE. This softwre supports Windows XP (SP3 or greter), XP Professionl x64 Edition (SP2 or greter), Windows Vist (SP2 or greter), Windows 7 nd Windows 8. Updte to the ltest Windows Servie Pk efore instlling MFL-Pro Suite. Disle ll personl firewll softwre (other thn Windows Firewll), nti-spywre, or ntivirus pplitions for the durtion of the instlltion. 14 Mke sure your omputer is ON nd you re logged on with Administrtor rights. Instll MFL-Pro Suite If the instlltion does not ontinue utomtilly, restrt the instlltion y ejeting nd then reinserting the CD-ROM or y doule-liking the strt.exe progrm from the root folder. Continue from step to instll MFL-Pro Suite. d Choose Wireless Network Connetion, nd then lik Next. To instll the PS driver (BR-Sript3 printer driver), hoose Custom Instll, nd then follow the on-sreen instrutions. When the Firewll/AntiVirus deteted sreen ppers, hoose Chnge the Firewll port settings to enle network onnetion nd ontinue with the instlltion. (Reommended) nd lik Next. Put the CD-ROM into your CD-ROM drive. If the model nme sreen ppers, hoose your mhine. If the lnguge sreen ppers, hoose your lnguge. If the Brother sreen does not pper utomtilly, go to Computer (My Computer). (For Windows 8: lik the (File Explorer) ion on the tskr, nd then go to Computer.) Doule-lik the CD-ROM ion, nd then doule-lik strt.exe. If the User Aount Control sreen ppers, lik Continue or Yes. If you re not using the Windows Firewll, see the user s guide for your softwre for informtion on how to dd the following network ports: For network snning, dd UDP port 54925. If you still hve troule with your network onnetion, dd UDP ports 161 nd 137. 32
Wireless Network Windows e Choose the mhine from the list, nd then lik Next. 15 Finish nd restrt Clik Finish to restrt your omputer. After restrting the omputer, you must log on with Administrtor rights. f If your wireless settings fil, lik the Wireless Setup utton nd follow the on-sreen instrutions to omplete the wireless onfigurtion. If you re using WEP nd the Touhsreen displys Conneted ut your mhine is not found, mke sure you entered the WEP key orretly. The WEP key is se-sensitive. The instlltion will utomtilly ontinue. The instlltion sreens pper one fter nother. If prompted, follow ny on-sreen instrutions. If n error messge ppers during the softwre instlltion, do one of the following: - For Windows XP, Windows Vist nd Windows 7 users: run the Instlltion Dignostis loted in (Strt) > All Progrms > Brother > DCP-XXXX LAN (where DCP-XXXX is your model nme). - For Windows 8 users: to run Instlltion Dignostis, doule-lik the (Brother Utilities) ion on the desktop, nd then lik the drop-down list nd selet your model nme (if not lredy seleted). Clik Tools in the left nvigtion r. Depending on your seurity settings when using the mhine or its softwre, Windows Seurity or ntivirus softwre window my pper. Plese llow or permit the window to ontinue. DO NOT nel ny of the sreens during the instlltion. It my tke few minutes for ll sreens to pper. If the Windows Seurity sreen ppers, selet the hek ox nd lik Instll to omplete the instlltion orretly. g h When the On-Line Registrtion sreen ppers, mke your seletion nd follow the on-sreen instrutions. One you hve ompleted the registrtion proess, lik Next. When the Setup is Complete sreen ppers, mke your seletion, nd then lik Next. 16 Instll MFL-Pro Suite on dditionl omputers (if needed) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 13 on pge 32. Network liense (Windows ) This produt inludes PC liense for up to five users. This liense supports the instlltion of the MFL-Pro Suite inluding Nune PperPort 12SE on up to five PCs on the network. If you wnt to use more thn five PCs with Nune PperPort 12SE instlled, plese purhse the Brother NL-5 pk whih is multiple PC liense greement pk for up to five dditionl users. To purhse the NL-5 pk, ontt your uthorized Brother deler or ontt Brother ustomer servie. Wireless Network Windows Mintosh 33
Wireless Network Windows Finish The instlltion is now omplete. For Windows 8 users: if the Brother mnuls inluded on the CD-ROM re in PDF formt, use Adoe Reder to open them. If Adoe Reder is instlled on your omputer ut nnot open the files in Adoe Reder, hnge the file ssoition for PDF (see How to open PDF file in Adoe Reder (Windows 8) uu pge 38). XML Pper Speifition Printer Driver The XML Pper Speifition Printer Driver is the most suitle driver for Windows Vist, Windows 7 nd Windows 8 when printing from pplitions tht use the XML Pper Speifition. Plese downlod the ltest driver from the Brother Solutions Center t http://solutions.rother.om/. 34
Wireless Network Mintosh Instll the Drivers nd Softwre (M OS X v10.6.8, 10.7.x, 10.8.x) 13 Before you instll For M OS X v10.6.7 or lower users: upgrde to M OS X v10.6.8, 10.7.x, 10.8.x. (For the ltest drivers nd informtion for the M OS X you re using, visit http://solutions.rother.om/.) 14 Mke sure your mhine is onneted to n AC power soure nd your Mintosh is ON. You must e logged on with Administrtor rights. Instll MFL-Pro Suite Put the CD-ROM into your CD-ROM drive, nd then doule-lik the BROTHER ion on your desktop. Doule-lik the Strt Here OSX ion. If prompted, selet your model. If there is more thn one of the sme model onneted on your network, the IP Address will e displyed to help you identify the mhine. You n find your mhine s IP Address y printing out the Network Configurtion Report (see Print the Network Configurtion Report uu pge 37). e The instlltion sreens pper one fter nother. If prompted, follow ny on-sreen instrutions. DO NOT nel ny of the sreens during the instlltion. It my tke few minutes for the instlltion to omplete. If the Setup Network "Sn to" nme sreen ppers, follow the instrutions elow: Choose Wireless Network Connetion, nd then lik Next. 1) Enter nme for your Mintosh (up to 15 hrters long). 2) Clik Next. Go to f. The nme you enter will pper on the mhine s Touhsreen when you press the Sn utton nd hoose sn option (for more informtion: uu Softwre User's Guide). If your wireless settings fil, the Wireless Devie Setup Wizrd sreen ppers. Follow the on-sreen instrutions to omplete the wireless onfigurtion. d Choose your mhine from the list, nd then lik Next. Wireless Network Windows Mintosh 35
Wireless Network Mintosh f g When the Add Printer sreen ppers, lik Add Printer. Choose your mhine from the list, lik Add, nd then lik Next. (OS X v10.8.x) Selet DCP-XXXX CUPS driver from the Use pop-up menu (where XXXX is your model nme). To dd the PS driver (BR-Sript3 printer driver), selet it from the Print Using (Use) pop-up menu. 15 Downlod nd instll Presto! PgeMnger When Presto! PgeMnger is instlled, OCR pility is dded to Brother ControlCenter2. You n esily sn, shre nd orgnize photos nd douments using Presto! PgeMnger. On the Brother Support sreen, lik Presto! PgeMnger nd follow the on-sreen instrutions. The instlltion of MFL-Pro Suite is now omplete. Go to step 15 on pge 36. 16 Instll MFL-Pro Suite on dditionl omputers (if needed) If you wnt to use your mhine with multiple omputers on the network, instll MFL-Pro Suite on eh omputer. Go to step 13 on pge 35. Finish The instlltion is now omplete. 36
For Network Users We Bsed Mngement (we rowser) The Brother print server is equipped with we server tht llows you to monitor its sttus or hnge some of its onfigurtion settings using HTTP (Hypertext Trnsfer Protool). We reommend Windows Internet Explorer 8.0/9.0 for Windows nd Sfri 5.0 for Mintosh. Plese lso mke sure JvSript nd ookies re lwys enled in whihever rowser you use. To use we rowser, you will need to know the IP ddress of the print server, whih is listed on the Network Configurtion Report. Open your rowser. Type http://mhine s IP ddress/ into your rowser s ddress r (where mhine s IP ddress is the IP ddress of the Brother mhine or the print server nme). For exmple: http://192.168.1.2/ If you hve onfigured n optionl login pssword, you must enter it when prompted to ess the We Bsed Mngement. For more informtion: uu Network User's Guide: We Bsed Mngement. Print the Network Configurtion Report You n print the Network Configurtion Report to onfirm the urrent network settings. Press. d e Press All Settings. Swipe up or down, or press or to disply Print Reports. Press Print Reports. Press Network Configurtion. Press OK. The mhine will print the urrent network settings. Restore the network settings to the ftory defult You n restore ll network settings of the internl Print/Sn server to the ftory defult. Press. d e f Press All Settings. Swipe up or down, or press or to disply Network. Press Network. Swipe up or down, or press or to disply Network Reset. Press Network Reset. Press Yes. Press Yes for two seonds. The mhine will restrt. Disonnet the les, nd fter the mhine hs restrted, reonnet the les. 37
Other Informtion Colour Corretion The output density nd print position of eh olour my vry depending on the mhine's environment. Ftors like temperture nd humidity n ffet olour. Colour lirtion nd olour registrtion help you to improve the olour density nd the print position of eh olour. Colour Clirtion Clirtion helps you to improve the olour density. If you print using the BR-Sript printer driver, you need to perform the lirtion from the ontrol pnel (see Using the ontrol pnel uu pge 38). If you print using the Windows printer driver, the driver will get the lirtion dt utomtilly if oth Use Clirtion Dt nd Get Devie Dt Automtilly re on (uu Softwre User's Guide). If you print using the Mintosh printer driver, you need to perform the lirtion using Sttus Monitor. After turning Sttus Monitor on, hoose Color Clirtion from Control menu (uu Softwre User's Guide). Using the ontrol pnel Press (Toner). d Press Clirtion. Press Clirte. Press Yes. e Press. Colour Registrtion Auto Registrtion Auto registrtion helps you to improve the print position of eh olour. How to open PDF file in Adoe Reder (Windows 8) d Move your mouse to the lower right orner of your desktop. When the menu r ppers, lik Settings, nd then lik Control Pnel. Clik Progrms, lik Defult Progrms, nd then lik Assoite file type or protool with progrm. Selet.pdf, nd then lik on the Chnge progrm... utton. Clik Adoe Reder. The ion next to.pdf hnges to the 'Adoe Reder' ion. Adoe Reder is now the defult pplition for reding.pdf files until you hnge this file ssoition. Brother CretiveCenter Get inspired. If you're using Windows, doule-lik the Brother CretiveCenter ion on your desktop to ess our FREE wesite with mny ides nd resoures for personl nd professionl use. For Windows 8 users: lik (Brother Utilities), nd then lik the drop-down list nd selet your model nme (if not lredy seleted). Clik Use More in the left nvigtion r, nd then lik Brother Cretive Center. M users n ess Brother CretiveCenter t this we ddress: http://www.rother.om/retiveenter/ Press (Toner). Press Auto Regist.. Press Yes. d Press. 38