EPIC 403
NEW EPIC CIRCON LS1 SERIES Technical Data 407 Straight Panel Mount Inlet with Male s (Style 1) 408 ngled Rotatable Panel Mount Inlet with Male s (Style 3) 409 Straight Panel Mount Socket with Male s & Locknut (Style G5) 409 Cable Connector with Female s (Style D6) 4 Panel Mount Socket with Female s (Style 6) 4 Cable Coupler with Male s (Style F6 & F7) 4 Tools & ccessories 411 pplications with Servo Cables 412 NEW EPIC CIRCON M23 SERIES Technical Data 413 Insert Configurations 4 s 4 Straight Panel Mount Base (Style 1) 415 ngled Panel Mount Base (Style 3) 415 Cable Coupler with Flange (Style F7) 415 Cable Connector (Style D6) 415 Cable Coupler (Style F6) 4 Front Wall Mounting with Locknut or M25 x 1.5 Thread Mount (Style G5) 4 Rear Wall Mounting (Style G6) 4 Rear Wall Mounting (Style B1) 417 Rear Wall Mounting (Style B2) 417 Curved Surface Front Mount (Style O1) 417 Tools & ccessories 418 pplications with Servo Cables 419 EPIC ZYLIN R 3.0 SERIES Technical Data 4 Cross Reference 4 ccessories 4 Model D6 Cable Connector 4 Model F6 Cable Connector 421 Model Panel Mount Base: Front Wall Mounting 421 Model B1 Panel Mount Base: Inside of Panel Mounting 4 Model B2 Panel Mount Base: Inside of Panel Mounting 4 Model G1 Panel Mount Base: Inside of Panel with Locknut 4 404 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
NEW EPIC EB & EC SERIES (5015) Key Features 423 Technical Data 424 Creating a 425 Insert Configuration 426 Wall Mount Receptacles 427 Box Mount Receptacles 427 Cable Coupler Receptacles 428 Straight Plug Connector 429 Right ngle Connector 430 ccessories 431 Tools 432 Finding the Right Cable 433 NEW EPIC EPT SERIES (26482) Key Features 434 Technical Data 435 Creating a 436 Insert Configuration 437 Wall Mount Receptacles 438 Box Mount Receptacles 439 Cable Coupler Receptacles 440 Straight Plug Connector 441 ccessories 442 Tools 443 Finding the Right Cable 444 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 405
Quick Select Chart of s and Configuration. Rated Voltage. Rated Current Termination Type/ Wire (WG) # of s 2 3 4 5 6 6 7 8 8 9 9 12 12 15 17 18 19 21 23 24 26 37 41 55 Configuration 2 3 4 5 5+PE 6 7 3+PE+4 8 8+1 9 8+4 12 +1 +2 17 18 19 21 +1 24 26 37 41 55 50 volts 60 volts 0 volts 150 volts 0 volts 500 volts 600 volts 900 volts 00 volts 7 amps 7.5 amps 13 amps amps amps 23 amps 46 amps Solder Crimp 24 to 24 to 18 to 18 to to 18 to to 12 8 WG Page LS1 Series 407 European DIN Style M23 Series Zylin R3.0 Series 413 4 North merican MIL Style EPT Series EB/EC Series 434 423 406 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
CIRCON LS1 Series The EPIC LS1 connectors have many inherent features which offer application advantages and provide significant benefits. These features make it one on the most application friendly connectors available, and insure quick and easy assembly, high reliability, and long, uninterrupted service life in tough industrial environments. Key features include: Rugged nickelplated, diecast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland provides strainrelief, IP67/68 protection, and 360 shielding Identification marking field and optional color marking clips can be used to provide positive identification and visual differentiation in multiple connector installations. Equipment Description EPIC LS1 Connectors are available in five housing arrangements and two contact configurations. Common to all arrangements are a rugged nickel plated zinc body, plastic contact insulation body and sleeve, and gold plated electrical contacts (included with the connector part number). Cable mounted arrangements also include an integral EMC shield ring and cable clamp and seal. The figure to the right shows the general construction of these connectors. These connectors are offered with a 5+PE contact configuration for power distribution (5 contacts plus ground rated at 630 volts and amps), and a 3+PE+4 contact configuration for mixed power and signal requirements for servo motor with brake and feedback applications (3 contacts plus ground rated 630 volts and amps and 4 contacts rated 250 volts and 7 amps). Used in combination, they connect one flexible cable with another (cable coupler) or one flexible cable to fixed wiring on a machine (appliance coupler). # of s: 5+PE, 3+PE+4 Rated Voltage: VDE: 630V (2mm contacts) 250V (1mm contacts) UL: 600V Rated Current: amps (2mm contacts) 7 amps (1mm contacts) Impulse Voltage: 6kV (2mm contacts) 4kV (1mm contacts) Resistance: <5m Ohms Mating Cycles: 500 Temperature Range: 25 C to +125 C Protection Class: Wire Gauge (Crimp): Cable Diameter: Materials: IP67/68 (h/1m) 2 mm contacts: 0.5 to 2.5 mm 2 ( WG) 1 mm contacts: 0. to 1.0 mm 2 (2418 WG) Standards: DIN EN 61984 pprovals: TECHNICL DT 7.5 to 15.5 mm Housing: Nickel Plated Zinc (Die Cast) Insulation Body: P, PBT, UL94 V0 s: Gold plated copper alloy Gaskets & Seals: FPM 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 407
CIRCON LS1 Series 5+PE 3+PE+4 Male Insert Female Insert Male Insert Female Insert View from contact side View from contact side Derating Curve Wire Gauge 2mm s WG WG 18 WG WG 1mm s WG 18 up to WG 26. Current () ccording to UL 5+PE 3+PE+4 13 13 9 9 5 5 7 1 STRIGHT PNEL MOUNT INLET WITH MLE CONTCTS (STYLE 1) 5+PE 3+PE+4 76003000 76004000 # 74033001 74033000 740331 740330 Male s (Spare s) Description 0. 1.0 mm 2 0. 1.0 mm 2 0.50 2.5 mm 2 0.50 2.5 mm 2 Pack 0 0 408 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
CIRCON LS1 Series NGLED ROTTBLE PNEL MOUNT INLET WITH MLE CONTCTS (STYLE 3) 5+PE 3+PE+4 444058 444056 STRIGHT PNEL MOUNT SOCKET WITH MLE CONTCTS & LOCKNUT (STYLE G5) 5+PE 3+PE+4 76153000 5+PE 76154000 CBLE CONNECTOR WITH FEMLE CONTCTS (STYLE D6) Short Body 3+PE+4 5+PE Standard Body 3+PE+4 761230 761240 76123000 76124000 # 74033501 74033500 74034501 74034500 74034601 74034600 Female s (Spare s) Description 0. 1.0 mm 2 0. 1.0 mm 2 0. 1.0 mm 2 0. 1.0 mm 2 0.50 2.5 mm 2 0.50 2.5 mm 2 Style Slot Slot Hyper boloid Hyper boloid Hyper boloid Hyper boloid Pack 0 0 0 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 409
CIRCON LS1 Series 5+PE PNEL MOUNT SOCKET WITH FEMLE CONTCTS (STYLE 6) 3+PE+4 76083000 76084000 CBLE COUPLER WITH MLE CONTCTS (STYLE F6 & F7) 5+PE Style F6 3+PE+4 76133000 76134000 5+PE Style F7 3+PE+4 Male s (Spare s) 763000 764000 # 74034001 74034000 740341 740340 Description 0. 1.0 mm 2 0. 1.0 mm 2 0.50 2.5 mm 2 0.50 2.5 mm 2 Pack 0 0 4 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
CIRCON LS1 Series TOOLS & CCESSORIES Crimp Tool 0. 6.0 mm Locator Removal Tool 2 Style 1, G5 118000 1 118300 # 75017400 75017500 Description 1 mm s 2 mm s 2 Metal Screw Cap Style 1 2 # 750182 750183 For Housing Style 1, 3, 6, F7 Style D6, F6, F7, G5 Plastic Protection Cap # 750077 750078 Description Style D6 Style 1, 6, F6, F7, G5 Yellow Marking Rings 750134 Red Marking Rings 750131 Green Marking Rings 750133 Blue Marking Rings 750132 Transparent Marking Rings 750130 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 411
CIRCON LS1 Series pplication with OLFLE Servo Cables Cable Series OLFLE SERVO 709 CY UL/CS/CE OLFLE SERVO 700 CE OLFLE SERVO 700 CY CE OLFLE SERVO FD LKSMSF5 UL/CS/VDE/CE Stationary pplications Use with LS1 (5+PE) 00380 0038011 0025700 0025701 Conductor Configuration WG/4c WG/4c WG/4c WG/4c Use with LS1 (3+PE+4) 0038021 00380 00365 0036150 0036157 0036158 0025715 00257 Conductor Configuration WG/4c + 2pr 19 WG/4c + 2pr 18 WG/4c + 2pr 19 WG/4c + 2pr 19 WG/4c + 2pr 19 WG/4c + 2pr 19 WG/4c + 1pr WG/4c + 1 pr Cable Series OLFLE SERVO FD 750 P CE OLFLE SERVO FD 750 CP UL/CS/CE OLFLE SERVO FD 755 P CE OLFLE SERVO FD 755 CP CE OLFLE SERVO FD LKSMSF8 UL/CS/VDE/CE OLFLE SERVO FD LKIN UL/CS/CE Continuous Flex pplications Use with LS1 (5+PE) 0027724 0027725 Conductor Configuration WG/4c WG/4c Use with LS1 (3+PE+4) 36245 36250 323UL 36350 36351 36370 36371 36360 0027718 0027719 7072404 7072405 Conductor Configuration WG/4c + 2pr 18 WG/4c + 2pr 18 WG/4c + 2pr 17 WG/4c + 2pr 18 WG/4c + 2pr 18 WG/4c + 1pr 17 WG/4c + 1pr 17 WG/4c + 2pr 18 WG/4c + 1pr WG/4c + 1pr WG/4c + 2pr 19 WG/4c + 2pr 18 412 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
CIRCON M23 Series The M23 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors available, and insure quick and easy assembly, high reliability, and long, uninterrupted service life in tough industrial environments Key features include: Rugged Nickelplated, diecast Zinc Body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland provides strainrelief, IP67/IP68 protection, and 360 degree shielding Identification marking field and unique color marking clips provide positive identification and visual differentiation in multiple connector installations. Colorcoded keying rings insure correct mating selection in applications where several connectors are mounted in the same location. Equipment Description EPIC CIRCON M23 Connectors are available in 3 housing arrangements that can accommodate 3 different insert keying positions. Inserts are offered in 7 contact configurations for mounting male or female, crimp or solder contacts. Common to all arrangements are a rugged nickel plated zinc body, plastic contact insulation body and sleeve, and gold plated electrical contacts. Cable mounted arrangements also include an integral EMC shield ring and cable clamp and seal. The figure to the right shows the general construction of these connectors. The connectors are offered with insert configurations for 6, 7, 8+1, 9, 12,, and 17 crimp or solder contacts in either a clockwise or counterclockwise orientation. Used in combination, they connect one cable with another (cable coupler) or a cable to fixed wiring in a control enclosure or on a machine, instrument, or servo motor. Technical Specifications # of s: 6, 7, 8+1, 9, 12,, 17 Rated Voltage: 6,7,8+1,9 poles 150 volts 12 & poles 0 volts 17 poles 50 volts Rated Current: 6 & 7 pole: amps; 8+1, 9, 12,, 17 pole: 7 amps Impulse Voltage: 0.8 kv Resistance: <5m Ohms Mating Cycles: 0 minimum Temperature Range: 25 C to +125 C Protection Class: IP67/68 (h/1m) Wire Gauge: Crimp 1mm : 0.1.0mm2 (2418 WG) 2mm : 1.02.5mm2 (18 WG) Solder 1mm : up to 1mm2 (18 WG) 2mm : up to 2.5mm2 ( WG) Cable Diameter: 7.0 to 13.5 mm Materials: Housing: Nickel Plated Zinc Insert: P, PBT, UL94 V0 s: gold plated copper alloy Gaskets & Seals: FPM Standards: DIN EN 61984 pprovals: TECHNICL DT 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 413
CIRCON M23 Series Insert Configurations Connector inserts will accept both male and female contacts. complete connection requires one EType insert and one PType insert 73002766 without contacts 73002754 without contacts 73002742 without contacts 73002730 without contacts 73002718 without contacts 73002706 without contacts 73008500 without contacts EType Insert (Clockwise numbered contacts viewed from the mating side) 73002768 with male solder 73002770 with female solder 73002756 with male solder 73002758 with female solder 73002744 with male solder 73002746 with female solder Use 2mm s Use 2mm s Use 1 & 2mm s 73002732 with male solder 73002734 with female solder 730027 with male solder 730027 with female solder 73002708 with male solder 730027 with female solder 73028500 with male solder 73018500 with female solder Use 1mm s Use 1mm s Use 1mm s Use 1mm s # of s 6 7 8+1 9 12 17 PType Insert (Counter Clockwise numbered contacts viewed from the mating side) Use 2mm s Use 2mm s Use 1 & 2mm s 73002760 without contacts 73002762 with male solder 73002748 without contacts 73002750 with male solder 73002736 without contacts 73002738 with male solder Use 1mm s Use 1mm s Use 1mm s Use 1mm s 73002724 without contacts 73002726 with male solder 73002712 without contacts 730027 with male solder 73002700 without contacts 73002702 with male solder 73008000 without contacts 73028000 with male solder 73002764 with female solder 73002752 with female solder 73002740 with female solder 73002728 with female solder 730027 with female solder 73002704 with female solder 73018000 with female solder s 72400000 724000 72402600 740600 74034500 724000 72404000 724000 72403000 Description M23 Gold Male Crimp 1mm : 0. 1.0 mm 2 (26 18 WG) M23 Gold Male Solder : up to 1.0 mm 2 (18 WG) M23 Gold Female Solder : up to 1.0 mm 2 (18 WG) M23 Gold Female Crimp : 0. 1.0 mm 2 (26 18 WG) M23/LS1 HYP Gold Female Crimp D6: 0. 1.0 mm 2 (26 18 WG) M23 Gold Female Crimp 2 mm : 1.0 2.5 mm 2 (18 WG) M23 Gold Female Solder 2mm up to 2.5 mm 2 ( WG) M23 Gold Male Crimp 2mm : 1.0 2.5 mm 2 (18 WG) M23 Gold Male Solder 2 mm : up to 2.5 mm 2 ( WG) Pack 0 0 0 0 0 0 0 0 0 4 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
CIRCON M23 Series Keying "N" Keying "" Keying "+" STRIGHT PNEL MOUNT BSE (STYLE 1) 704000 7040 7040 (ll dimensions above are in mm) NGLED PNEL MOUNT BSE (STYLE 3) 444055 (ll dimensions above are in mm) CBLE COUPLER WITH FLNGE (STYLE F7) 444009 444011. Cable O.D. 7 mm 9.5 13.5 mm (ll dimensions above are in mm) Keying "N" Keying "" Keying "+" CBLE CONNECTOR (STYLE D6) 444037 444036 444038 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 415
CIRCON M23 Series Keying "N" Keying "" Keying "+" CBLE COUPLER (STYLE F6) 444040 444039 444041 FRONT WLL MOUNTING WITH LOCKNUT OR M25 1.5 THRED MOUNT (STYLE G5) Keying "N" Keying "" Keying "+" 444046 444044 444048 RER WLL MOUNTING (STYLE G6) Keying "N" 444071 4 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
CIRCON M23 Series RER WLL MOUNTING (STYLE B1) Keying "N" Keying "" Keying "+" 444024 4440 444026 RER WLL MOUNTING (STYLE B2) Keying "N" Keying "" Keying "+" 444050 444052 444035 CURVED SURFCE FRONT MOUNT (STYLE O1) Mounting ø 50mm Mounting ø 58mm Mounting ø 70mm Mounting ø 90mm 444083 444085 444087 444028 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 417
CIRCON M23 Series Crimp Tool 0. 6.0 mm 2 Locator 118000 118300 Removal Tool Panel Base Insert: Style, B, G, O 444078 2 1 1 2 Metal Screw Cap Plastic Protection Cap Style 1 2 # 750181 750180 For Housings Style D, F, G Style, B, F7, O Style 1 2 # 750077 750078 For Housings Style D6 Style, B, F, G, O Yellow Marking Rings 444098 Red Marking Rings 4440 Green Marking Rings 444099 Blue Marking Rings 444096 Transparent Marking Rings 444097 418 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
CIRCON M23 Series The CIRCON M23 connectors are ideal for use with industrial control and data cables, and servo feedback cables. Based on the specific application, a wide variety of cable/connector combinations is possible. The tables below provide a sampling of the possibilities. pplication Industrial Equipment Control and Signal Servo Feedback (Siemens) Stationary/Flexible pplications Use With Connector Configuration 6 & 7 Pole 8+1, 9, 12,, & 17 Pole OLFLE 190/190 CY OLFLE 490P/490 CP UNITRONIC 190/190 CY/190 CY TP OLFLE 590P/590 CP OLFLE SPIRL 400P/540 P OLFLE TC 600 UNITRONIC 300/300CY OLFLE Tray II OLFLE Servo LKSMSF5 0025724 4x2x() + 4x() 0025725 3x2x(26) + 4x(26) + 1x2x() 0025726 3x2x(26) + 4x(26) + 1x2x() + 4x(24) pplication Industrial Equipment Control and Signal Servo Feedback (Siemens) Servo Feedback (Indramat) Continuous Flex pplications Use With Connector Configuration 6 & 7 Pole 8+1, 9, 12,, & 17 Pole OLFLE FD 890/890 CY OLFLE FD 891/891 CY OLFLE FD 890 P/890 CP OLFLE FD 891 P/891 CP UNITRONIC FD 890 UNITRONIC FD P UNITRONIC FD CP UNITRONIC FD CP (TP) OLFLE SERVO FD LKSMSF8 0027711 4x2x() + 4x() 0027713 3x2x(26) + 4x(26) + 1x2x() 00277 3x2x(26) + 4x(26) + 1x2x() + 4x(24) OLFLE SERVO FD LKIN 7072400 4x2x(24) + 2x(18) 7072401 4x2x(24) + 2x() 7072402 9x() 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 419
ZYLIN R 3.0 Series The Zylin R3.0 Series Circular Connectors is used as an alternative to the Zylin R2.5 Series connector when additional contacts are required. Note: s are specified separately but sold assembled. lways use combination part number when ordering. of s: Rated Voltage: Test Voltage: Insulation: Rated Current: Temperature Range: Protection Class: Wire Gauge: Cable O.D. Range: Resistance Mating Cycles: Material: Housing: Insulation Body (Inserts): Gaskets: s: TECHNICL DT 21, 26 25V/ 60V C/DC 1.5 kv, C B: corresponds to equipment used primarily in residential premises, sales or other professional environments, precision engineering workshops, laboratories, testing centers, hospitals, etc. 7.5 40 C to 125 C IP 65... IP 67, mated, DIN 40050 dependent on cable gland Solder: up to 1 mm2 6.5 mm <3 (mohm) 500 (higher mating cycles depends on the application) Copper alloy, nickel plated Thermoplastic according to UL94 V0 Neoprene Copper alloy, gold plated CROSS REFERENCE TBLE lways use Combination when ordering HOUSING: Connector.40F.50F Panel Mount Sockets...30.60 21 CONTCTS 26 CONTCTS INSERT 40.0121 00009045 00008854 00008747 00009082 000621 00009371 INSERT 40.250121 00008749 00008779 00008867 00009135 000041 00009057 INSERT 40.0126 00008899 000088 00008825 00009700 00008939 00009894 INSERT 40.250126 00008829 00008979 00008746 00008978 00009470 00009005 CCESSORIES NGLED HOUSING METL SCREW CP FLT GSKET SELING RING SSEMBLY TOOL Std Pack of 5: Metal Screw Cap Flat Gasket ngled Housing 4 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
ZYLIN R 3.0 Series MODEL D6 CBLE CONNECTOR 40F # of s 21 26 Male # 00009045 00008899 Female # 00008749 00008829 ccessory s: Metal Screw Cap: 504121 ssembly Tool: 500800 MODEL F6 CBLE CONNECTOR 50F # of s 21 26 Male # 00008854 000088 Female # 00008779 00008979 ccessory s: Metal Screw Cap: 505121 ssembly Tool: 500800 MODEL PNEL MOUNT BSE: FRONT WLL MOUNTING # of s 21 26 Male # 00008747 00008825 Female # 00008867 00008746 ccessory s: Flat Gasket: 5013 Metal Screw Cap: 5011 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 421
ZYLIN R 3.0 Series MODEL B1 PNEL MOUNT BSE: INSIDE OF PNEL MOUNTING # of s 21 26 Male # 00009082 00009700 Female # 00009135 00008978 ccessory s: Flat Gasket: 5013 Metal Screw Cap: 5011 ngled Housing: 5012C MODEL B2 PNEL MOUNT BSE: INSIDE OF PNEL MOUNTING 30 # of s 21 26 Male # 000621 00008939 Female # 000041 00009470 ccessory s: Metal Screw Cap: 5031 Flat Gasket: 5023 MODEL G1 PNEL MOUNT BSE: INSIDE OF PNEL WITH LOCKNUT 60 # of s 21 26 Male # 00009371 00009894 Female # 00009057 00009005 ccessory s: Sealing Ring: 5064 4 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
EB & EC Series (5015) EPIC EB and EC Series Connectors are available in five housing styles, eight housing sizes, and twenty contact configurations. Common to all arrangements are a rugged nickel plated aluminum alloy body with either threaded coupling (EC) or bayonet coupling (EB), thermoplastic rubber contact insert, and silver plated electrical contacts. Cable mounted arrangements are also available with an integral 360 degree EMC shield and cable clamp with environmental seal. The figure below shows the general construction of these connectors. ll housings are available with either male pin or female socket contacts. The connectors are offered with insert configurations from 2 to 37 crimp contacts. Used in combination, they connect one cable with another (cable coupler) or a cable to fixed wiring in a control enclosure or on a machine, robot, instrument, or servo motor. The new connectors incorporate many inherent features offering significant application advantages. These features make it one of the most application friendly connectors available, and insure quick and easy assembly, high reliability, and long, uninterrupted service life in tough industrial environments. Key features include: Rugged Nickelplated, luminum alloy body TPE insert material provides high degree of environmental and chemical resistance. vailable backshell designs provide strainrelief, IP 67 protection, and 360 degree EMC shielding ll materials used in these connectors are RoHS compliant. Standard crimp contacts provide easy field assembly and replacement. EC Series are fully intermateable and interchangeable with connectors produced in accordance with MILC5015. EB Series uses a threepoint Bayonet Coupling which provides positive vibration protection for use with motor drives and moving assemblies. They are fully intermateable and interchangeable with connectors produced in accordance with MILC5015 (inserts) and VG95234 (housings). Compression Sleeve Pin Pin Insert Seal Gasket Insert Holder Socket Insert Straight Plug Connector Backshell Seal Grommet Socket Socket Insert Coupling Nut Receptacle Pin Insert Socket Pin Box Mount Receptacle 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 423
EB & EC Series (5015) of s Termination Wire Range Current Rating Voltage Rating Mating Cycles Jacketed Cables OD (Class J&S) Housing: Insert: : Gaskets & Seals: Temperature Range: Environmental Seal: RoHS Compliance: Standards: 12 8 12 8 Service Rating Inst D Rated mps 13 23 46 Test Voltage C (rms) 00 00 2800 2 to 37 Crimp Wire Gauge (WG) 18,, 12 8 Test Current (a) 35 60 C (rms) 0 500 900 500 minimum Voltage Drop (mv) 21 12. Work Voltage DC 250 700 1250 0.08 to 1. inches (2.0 to 28 mm) depending on housing size Nickel plated aluminum alloy TPE Synthetic Rubber UL 94 V0 Copper alloy, silver plate per QQS365 TPE Synthetic Rubber UL94 V0 55 C to +125 C Ref MILC5015 (MILSTD 2/1344) (Class J& S IP67 equiv. mated) Yes MILC5015; QQS365; VG95234 (EB Series) SL S S 18 24 28 Screw Height.138 (3.5).138 (3.5).138 (3.5).138 (3.5).138 (3.5).138 (3.5).138 (3.5).197 (5.0).197 (5.0) With Backshell.1 (2.54).1 (2.54).1 (2.54).1 (2.54).1 (2.54).1 2.54).1 (2.54).1 (2.54).1 (2.54) Panel Cutout Dimensions in inches (mm) H R T G SL.650.717.130 0.728 (.5) (18.21) (3.3) (18.5) S.774.906.130 0.980 (19.7) (23.0) (3.3) (24.9) S.900.969.130 1.090 (.9) (24.6) (3.3) (27.7) 18 24 28 (35.6) (34.9) (4.0) (41.3) 1.650 1.563.197 1.854 (41.9) (39.7) (5.0) (47.1).900 (.9) 1.028 (26.1) 1.150 (29.2) 1.276 (32.4) 1.402.969 (24.6) 1.063 (27.0) 1.157 (29.4) 1.252 (31.8) 1.374.130 (3.3).130 (3.3).130 (3.3).130 (3.3).157 1.090 (27.7) 1.4 (31.1) 1.358 (34.5) 1.488 (37.8) 1.626 imum Panel Thickness inches (mm) EB Series Front Mount Rear Mount EB Series Front Mount Without Backshell.271 (6.88).271 (6.88).271 (6.88).271 (6.88).271 (6.88).271 (6.88).271 (6.88).271 (6.88).271 (6.88) Screw + Panel.305 (7.82).305 (7.82).305 (7.82).315 (8.0).305 (7.82).305 (7.82).305 (7.82).305 (7.82).315 (8.0) Screw Height.125 (3.18).125 (3.18).125 (3.18).125 (3.18).125 (3.18).125 (3.18).125 (3.18).125 (3.18).125 (3.18) With Backshell.1 (.254).1 (.254).1 (.254).1 (.254).1 (.254).1 (.254).1 (.254).1 (.254).1 (.254) Without Backshell.271 (6.88).271 (6.88).271 (6.88).271 (6.88).271 (6.88).271 (6.88).271 (6.88).271 (6.88).271 (6.88) Rear Mount Screw + Panel.187 (4.75).187 (4.75).187 (4.75).125 (3.18).125 (3.18).125 (3.18).125 (3.18).187 (4.75).187 (4.75) 424 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
EB & EC Series (5015) EC 06 J S6 S C _ M Series Prefix EB Bayonet Coupling EC Thread Coupling Style 00 Wall Mount Receptacle 01 Cable Coupler 02 Box Mount Receptacle (Class E Only) 06 Straight Connector 08 Right ngle Connector Service Class Class M Environmental housing seal with Metric Backshell (add xx modification code at the end). Up to IP 67 based on threaded accessory Class E Class J Class S Environmental seal for individual wires Watertight IP 67 seal, metric backshell & strain relief (SKINTOP MSM, MSRM) for jacketed cable (add xxx modification code at the end) Same a J type (with SKINTOP MSSC) for shielded jacketed cable (add xxx modification code at the end.) Style P Pin S Socket Type C crimp lternate Insert Orientation Blank Normal Other These are special order. Consult for availability and minimums. Modification Codes xx Metric Thread Code (Class M) Metric x 1.5 Metric x 1.5 25 Metric 25 x 1.5 32 Metric 32 x 1.5 40 Metric 40 x 1.5 xxx Metric SKINTOP Code (Class J, S) (See Table 1) rrangement Code Code SL3 SL4 S2 S5 S6 S1 181 7* * 27 29 33* 247 2428 2812 2821 1811 4 15 24 18 24 24 28 28 18 24 # of s 3 2 4 5 6 7 8 7+2 17 11 19 +2 24 26 37 3 5 4 7 4 7 Oper mps 13 13 13 13 13 13 13 13 13+23 13 13 13 13 13+23 13 13 13 23 23 23 23 46 46. Volts 500 500 0 0 0 500 (6) 0, (4) 500 (4) 500, (4) 900 500 500 500 500 500 500 0 500 500 500 500 900 500 500 500 * Currently not tooled, consult for availability and minimums. Code M R S M R S 25M 25R 25S 32M 32R 32S 40M 40R 40S Metric SKINTOP Selection (Table 1) Thread SKINTOP Reference Cable OD Range Type mm inches M M M25 M32, 18, MSM MSRM MSSC MSM MSRM MSSC MSM MSRM MSSC MSM MSRM 5311 531121 531126 5311 531121 53112630 531130 53112130 53112640 5310 531120 4.5 2 7 4.5 9 7 13 5 7 12.5 9 17 6 13 9.5 11 21 7 15.177.394.079.276.177.354.276.512.197.394.276.492.354.669.236.512.354.650.433.827.276.591 MSSC MSM 53112650 531150 11 21 19 28.433.827.748 1.2 M40 24, 28 MSRM 53112150 15 23.591.906 MSSC 53112660 19 28.748 1.2 Service Class J J S J J S J J S J J S J J S 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 425
EB & EC Series (5015) Connector inserts follow standard MILC5015 configurations and are available with either all male or all female contacts. Insert No. of Voltage s Class 812 Insert No. of Voltage s Class 812 Insert No. of Voltage s Class 8 12 3 3 4 D 4 19 19 SL3 4 SL4 2 2 7 * 8 =B,C, F,G Inst= BL 8 4 4 4 Inst 4 7 7 2 S2 15 247 S5 5 Inst 5 * 9 2 7 24 24 7 7 6 Inst 6 24 Inst 24 S6 27 2428 7 7 17 17 26 26 S1 29 28 2812 3 3 33 * 11 11 2821 37 37 18 181 =B,C, F,G Inst= BL 12 8 1811 5 5 * Currently not tooled, consult for availability and minimums. 426 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
EB & EC Series (5015) Wall Mount Receptacle (E_00...) Thd Class M Class E Class J & Class S M CC Thd V Thd Yj/Ys Lm K La/Le Lj/Ls Dimensions in Inches (Millimeters) SL.717 (18.2) S.969 (24.6) S 1.079 (27.4) 1.079 (27.4) 18 1.213 (30.8) 1.346 (34.2) 1.472 (37.4) 24 1.6 (40.9) 28 1.839 (46.7) Thread Class 2.62524.875 1.000 1.000 1.12518 1.25018 1.37518 1.50018 1.75018 K.1 (2.8).126 (3.2).126 (3.2).126 (3.2).154 (3.9).154 (3.9).154 (3.9).154 (3.9).154 (3.9) La/Le 1.575 (40) 1.575 (40) 1.575 (40) 2.0 (51.2) 2.0 (51.21) 2.0 (51.21) 2.0 (51.21) 2.067 (52.50) 2.382 (60.50) Lm 2.317 (58.85) 2.317 (58.85) 2.317 (58.85) 2.758 (70.05) 2.758 (70.05) 2.953 (75.01) 2.953 (75.01) 3.004 (76.30) 3.319 (84.30) Lj/Ls 3.341 (84.86) 3.459 (87.86) 3.518 (89.36) 3.959 (0.6) 3.959 (0.6) 4.390 (111.5) 4.390 (111.5) 4.540 (115.3) 4.855 (123.3) M.567 (.4).567 (.4).567 (.4).756 (19.2).756 (19.2).756 (19.2).756 (19.2).819 (.8).819 (.8) R.717 (18.21).906 (23.0).969 (24.6).969 (24.6) 1.063 (27.0) 1.157 (29.4) 1.252 (31.8) 1.374 (34.9) 1.563 (39.7) S 1.000 (25.4) 1.181 (30.0) 1.280 (32.5) 1.280 (32.5) 1.378 (35.0) 1.496 (38) 1.6 (41) 1.752 (44.5) 2.000 (50.8) T.126 (3.2).126 (3.2).126 (3.2).126 (3.2).126 (3.2).126 (3.2).126 (3.2).6 (3.7).6 (3.7) Yj/Ys.894 (.7) 1.075 (27.3) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.594 (40.5) 1.594 (40.5) 2.0 (51.2) 2.0 (51.2) Cable OD Nominal *1.177.354 (4.5 9.0).276.492 (7.0 12.5).354.650 (9.0.5).354.650 (9.0.5).354.650 (9.0.5).433.827 (11.0 21.0).433.827 (11.0 21.0).748 1.2 (19.0 28.0).748 1.2 (19.0 28.0) cc Thread M M M25 M25 M25 M32 M32 M40 M40 V Thread Class 2 5/824 3/4 7/8 7/8 1 1 3/18 1 3/18 1 7/18 1 7/18 *1 For exact OD range see SKINTOP MSM (Page 502) or MSSCM (Page 505) Box Mount Receptacle (E_02...) Thd pplication: Wall/box mounting connector. Mates with housing styles E_06..., E_08... Note: L* dimension equals total connector length including cable accessory. Class E M L K N SL S S 18 24 28 Dimensions in Inches (Millimeters) Thread K L M N R S T See Table bove See Table bove See Table bove.972 (24.7).972 (24.7).972 (24.7) 1.358 (34.5) 1.358 (34.5) 1.358 (34.5) 1.358 (34.5) 1.409 (35.8) 1.409 (35.8) See Table bove.630 (.0).754 (19.15).880 (.35).880 (.35) 1.008 (25.6) 1.130 (28.7) 1.492 (37.9) 1.382 (35.1) 1.630 (41.4) See Table bove See Table bove See Table bove 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 427
EB & EC Series (5015) Cable Coupler Receptacle (E_01...) Thd Class M Class E M CC Thd V Thd S Lm K La/Le Class J & Class S Yj/Ys Lj/Ls SL S S 18 24 28.717 (18.2).969 (24.6) 1.079 (27.4) 1.079 (27.4) 1.213 (30.8) 1.346 (34.2) 1.472 (37.4) 1.6 (40.9) 1.839 (46.7) Thread Class 2.62524.875 1.000 1.000 1.12518 1.25018 1.37518 1.50018 1.75018 K.1 (2.8).126 (3.2).126 (3.2).126 (3.2).154 (3.9).154 (3.9).154 (3.9).154 (3.9).154 (3.9) La/Le 1.575 (40) 1.575 (40) 1.575 (40) 2.0 (51.2) 2.0 (51.21) 2.0 (51.21) 2.0 (51.21) 2.067 (52.50) 2.382 (60.50) Dimensions in Inches (Millimeters) Lm 2.317 (58.85) 2.317 (58.85) 2.317 (58.85) 2.758 (70.05) 2.758 (70.05) 2.953 (75.01) 2.953 (75.01) 3.004 (76.30) 3.319 (84.30) Lj/Ls 3.341 (84.86) 3.459 (87.86) 3.518 (89.36) 3.959 (0.6) 3.959 (0.6) 4.390 (111.5) 4.390 (111.5) 4.540 (115.3) 4.855 (123.3) M.567 (.4).567 (.4).567 (.4).756 (19.2).756 (19.2).756 (19.2).756 (19.2).819 (.8).819 (.8) S.976 (24.8) 1.5 (29.6) 1.260 (32.0) 1.260 (32.0) 1.343 (34.1) 1.500 (38.1) 1.6 (41.2) 1.764 (44.8) 2.012 (51.1) *1 For exact OD range see SKINTOP MSM (Page 502) or MSSCM (Page 505) Yj/Ys.894 (.7) 1.075 (27.3) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.594 (40.5) 1.594 (40.5) 2.0 (51.2) 2.0 (51.2) Cable OD Nominal *1.177.354 (4.5 9.0).276.492 (7.0 12.5).354.650 (9.0.5).354.650 (9.0.5).354.650 (9.0.5).433.827 (11.0 21.0).433.827 (11.0 21.0).748 1.2 (19.0 28.0).748 1.2 (19.0 28.0) cc Thread M M M25 M25 M25 M32 M32 M40 M40 V Thread Class 2 5/824 3/4 7/8 7/8 1 1 3/18 1 3/18 1 7/18 1 7/18 pplication: Cable coupler receptacle. Mates with housing styles E_06... and E_08... Note: L* dimension equals total connector length including cable accessory. 428 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
EB & EC Series (5015) Straight Plug Connector (E_06...) Thd Class M Class E CC Thd V Thd Q Lm La/Le Class J & Class S Yj/Ys Lj/Ls SL S S 18 24 28 Thread Class 2.62524.875 1.000 1.000 1.12518 1.25018 1.37518 1.50018 1.75018 La/Le 1.575 (40) 1.575 (40) 1.575 (40) 2.0 (51.2) 2.0 (51.21) 2.0 (51.21) 2.0 (51.21) 2.067 (52.50) 2.382 (60.50) Dimensions in Inches (Millimeters) Lm 2.317 (58.85) 2.317 (58.85) 2.317 (58.85) 2.758 (70.05) 2.758 (70.05) 2.953 (75.01) 2.953 (75.01) 3.004 (76.30) 3.319 (84.30) Lj/Ls 3.341 (84.86) 3.459 (87.86) 3.518 (89.36) 3.959 (0.6) 3.959 (0.6) 4.390 (111.5) 4.390 (111.5) 4.540 (115.3) 4.855 (123.3) EB Q.866 (.0) 1.2 (29.0) 1.252 (31.8) 1.252 (31.8) 1.433 (36.4) 1.567 (39.8) 1.693 (43.0) 1.831 (46.5) 2.067 (52.5) EC Q.906 (23.0) 1.2 (28.0) 1.240 (31.5) 1.240 (31.5) 1.343 (34.1) 1.469 (37.3) 1.587 (40.3) 1.713 (43.5) 1.945 (49.4) Yj/Ys.894 (.7) 1.075 (27.3) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) 1.594 (40.5) 1.594 (40.5) 2.0 (51.2) 2.0 (51.2) *1 For exact OD range see SKINTOP MSM (Page 502) or MSSCM (Page 505) Cable OD Nominal *1.177.354 (4.5 9.0).276.492 (7.0 12.5).354.650 (9.0.5).354.650 (9.0.5).354.650 (9.0.5).433.827 (11.0 21.0).433.827 (11.0 21.0).748 1.2 (19.0 28.0).748 1.2 (19.0 28.0) cc Thread M M M25 M25 M25 M32 M32 M40 M40 V Thread Class 2 5/824 3/4 7/8 7/8 1 1 3/18 1 3/18 1 7/18 1 7/18 pplication: Straight plug connector. Mates with housing styles E_00...; E_01...; E_02... Note: L* dimension equals total connector length including cable accessory 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 429
EB & EC Series (5015) Right ngle Plug Connector (E_08...) Y Class M Class E Class J & Class S L C/L C/L C/L Thd CC Thd m a/e V Thd j/s Yj/Ys SL S S 18 24 28 Thread Class 2.62524.875 1.000 1.000 1.12518 1.25018 1.37518 1.50018 1.75018 L 1.512 (38.4) 1.571 (39.9) 1.701 (43.2) 2.089 (53.1) 2.195 (55.8) 2.315 (58.8) 2.417 (61.4) 2.465 (62.6) 2.555 (64.9) a/e.945 (24.0) 1.031 (26.2) 1.094 (27.8) 1.094 (27.8) 1.189 (30.2) 1.252 (31.8) 1.319 (33.5) 1.378 (35.0) 1.476 (37.5) Dimensions in Inches (Millimeters) m 2.294 (58.3) 2.375 (60.3) 2.438 (61.9) 2.493 (63.3) 2.588 (65.7) N N N N j/s 3.318 (84.3) 3.517 (89.3) 3.639 (92.4) 3.694 (93.8) 3.789 (96.2) N N N N EB Y.894 (.7) 1.2 (29.0) 1.252 (31.8) 1.252 (31.8) 1.433 (36.4) 1.567 (39.8) 1.693 (43.0) 1.831 (46.5) 2.067 (52.5) EC Y.906 (23.0) 1.2 (28.0) 1.240 (31.5) 1.240 (31.5) 1.343 (34.1) 1.469 (37.3) 1.587 (40.3) 1.713 (43.5) 1.965 (49.4) *1 For exact OD range see SKINTOP MSM (Page 502) or MSSCM (Page 505) Yj/Ys.894 (.7) 1.075 (27.3) 1.280 (32.5) 1.280 (32.5) 1.280 (32.5) N N N N Cable OD Nominal *1.177.354 (4.5 9.0).276.492 (7.0 12.5).354.650 (9.0.5).354.650 (9.0.5).354.650 (9.0.5) N N N N cc Thread M M M25 M25 M25 N N N N V Thread Class 2 5/824 3/4 7/8 7/8 1 1 3/18 1 3/18 1 7/18 1 7/18 pplication: Right angle plug connector. Mates with housing styles E_00...; E_01...; and E_02... Note: * dimension equals total length from center line including cable accessory 430 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
EB & EC Series (5015) Panel Gasket Grommet Hole Seal Plug 18 24 28 Flat Panel Gasket 61U05315 61U053 61U05317 61U05318 61U05319 61U053 61U05321 61U053 12 8 Color Blue Yellow White 61U05332 61U05333 61U05334 Crimp s: Spares only Basic connector includes contact S 12 8 mm 2 1 1.5 1 1.5 2.5 4.0 WG 18 18 12 8 L1 inches (mm) 1.050 (26.7) 1.250 (31.7) 1.480 (37.7) 1.660 (42.0) L2 inches (mm) 1.050 (26.7) 1.440 (36.5) 1.480 (37.7) 1.660 (42.0) ød inches (mm).062 (1.6).062 (1.6).093 (2.4).1 (3.6) Pin 61U05335 61U05336 61U05337 61U05338 Socket 61U05339 61U05340 61U05341 61U05342 Strip Length inch (mm).312 (7.9).563 (.3) Connector Dust Caps EB Series EC Series SL S /S 18 24 28 Plug Cap* 61U05367 61U05368 61U05369 61U05370 61U05371 61U05372 61U05373 61U05374 EB Series Receptacle Cap + 61U05359 61U05360 61U05361 61U05362 61U05363 61U05364 61U05365 61U05366 SL S /S 18 24 28 Plug Cap* 61U05351 61U05352 61U05353 61U05354 61U05355 61U05356 61U05357 61U05358 EC Series Receptacle Cap + 61U05343 61U05344 61U05345 61U05346 61U05347 61U05348 61U05349 61U05350 B B *Protective plug caps for use with E_06... and E_08... connectors + Protective receptacle caps for use with E_00...; E_01...; and E_02... connectors SL S /S 18 24 28 Chain Hole Diameter Plug Cap in/(mm).157 (4.0).157 (4.0).157 (4.0).157 (4.0).189 (4.8).189 (4.8).189 (4.8).189 (4.8) Receptacle Cap B (in/mm).2 (3.6).2 (3.6).2 (3.6).2 (3.6).2 (3.6).2 (3.6).7 (4.25).7 (4.25) 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 431
EB & EC Series (5015) S mm 2 1 1.5 1 1.5 WG 18 18 Crimp Tool 61U05397 Turret Head 61U05398 Crimp Gage GoNo Go 61U05399 Insertion Tool 61U05400 Removal Tool 61U05403 12 2.5 4.0 12 61U05401 61U05404 8 8 *1 *1 *1 61U05402 61U05405 * Requires pneumatic crimp tool and positioner as manufactured by Pico Crimping Tool Co. SKINDICHT Reducers, Enlargers, and dapters For use with Class M connectors SL S S/ 18 24 28 Class M Thread M M M25 M32 M40 Reducers M/ M12 5243 M/ M 524312 M25/ M 5243 M32/ M25 5243 M40/ M32 524318 Enlargers M/ M 524452 M/ M25 524454 M25/M32 524456 M32/ M40 524458 M40/M50 524460 Metric to NPT M/ 1/2 5400 M/ 1/2 5401 M25/ 3/4 540130 M32/ 1 540152 M40/ 1 1/4 540153 Metric to PG M/ PG7 5240 M/ PG9 5242 M25/ PG 524240 M32/ PG21 524260 M40/ PG21 524270 Metric to PG B M/ PG9 524340 M/ PG11 524360 M25/PG21 524400 M32/PG29 5244 M40/PG36 5244 432 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
EB & EC Series (5015) The EB and EC Series connectors are ideal for use with industrial power and control cables. Based on the specific application, a wide variety of cable/connector combinations is possible. The table below provides a sampling of the possibilities. pplication Stationary/ Flexible Continuous Flex Power OLFLE 190/ 190 CY OLFLE TRY II/ II CY OLFLE POWER I OLFLE POWER QUD II OLFLE VFD SLIM OLFLE SERVO 709 CY OLFLE TC 600 OLFLE FD 890/ 890 CY OLFLE FD 891/ 891 CY OLFLE FD 890P/ 890 CP OLFLE FD 891P/ 891 CP OLFLE FD 890/ 890 CY OLFLE ROBOT 900 P Control OLFLE 190/ 190 CY OLFLE TRY II/ II CY OLFLE CONTROL M OLFLE CONTROL TM OLFLE CONTROL COLD OLFLE UTO I OLFLE TC 600 OLFLE FD 890/ 890 CY OLFLE FD 891/ 891 CY OLFLE FD 890P/ 890 CP OLFLE FD 891P/ 891 CP OLFLE FD 890/ 890 CY OLFLE ROBOT 900 P OLFLE FD UTO 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 433
EPT Series (26482) EPIC EPT Series Connectors are available in four housing styles, six housing sizes, and sixteen contact configurations. Common to all arrangements are a rugged nickel plated aluminum alloy body, thermoplastic rubber contact insert, and gold plated electrical contacts. Cable mounted arrangements are also available with an integral 360 degree EMC shield and cable clamp with environmental seal. The figure below shows the general construction of these connectors. ll housings are available with either male pin or female socket contacts. The connectors are offered with insert configurations from 3 to 55 crimp contacts. Used in combination, they connect one cable with another (cable coupler) or a cable to fixed wiring in a control enclosure or on a machine, robot, instrument, encoder, or servo motor. The new connectors incorporate many inherent features offering significant application advantages. These features make it one of the most application friendly connectors available, and insure quick and easy assembly, high reliability, and long, uninterrupted service life in tough industrial environments. Straight Plug Connector Compression Sleeve Backshell Seal Grommet Key features include: Rugged Nickelplated, luminum alloy body TPE insert material provides high degree of environmental and chemical resistance Threepoint Bayonet Coupling provides positive vibration protection for use with motor drives and moving assemblies vailable backshell designs provide strainrelief, IP67 protection, and 360 degree EMC shielding ll materials used in these connectors are RoHS compliant Standard crimp contacts provide easy field assembly and replacement Retention Disk Wave Washer Pin Insert Pin Socket Insert Seal Gasket Socket Seal Grommet Socket Coupling Nut Plug Socket Insert Receptacle Pin Insert Retention Disk Pin Fully intermateable and interchangeable with connectors produced in accordance with MILC26482 Series 1 and 2 Compression Sleeve Cable Coupler Receptacle Backshell 434 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
EPT Series (26482) Electrical: of s Termination Wire Range Current Rating Voltage Rating Mating Cycles Jacketed Cables OD (Class J&S) ltitude Sea Level 70,000 ft Wire Gauge (WG) 24,,, 18, Rated mps 7.5 13.0 Service Rating 1 2 1 2 Material & Environmental: Housing: Insert: : Gaskets & Seals: Temperature Range: Environmental Seal: RoHS Compliance: Standards: 3 to 55 Crimp Insulation OD Inch (mm) Min..060 (1.52).066 (1.68) Test Current (mps) 7.5 13.0 Test Voltage C (rms) 1500 2300 375 500 500 minimum DC 20 30 535 770 0.08 to 0.83 inches (2.0 to 21 mm) depending on housing size Nickel plated aluminum alloy TPE Synthetic Rubber UL94 V0 Copper alloy, gold plate per MILG454 Type II TPE Synthetic Rubber UL94 V0 55 C to +125 C Ref MILC26482 (MILSTD 2/1344) (Class J& S IP67 equiv. mated) Yes MILC26482; MILG454 Type II..083 (2.11).9 (2.77). Millivolt Drop 55 49. Work Voltage C (rms) DC 600 850 0 00 300 5 450 740 Panel Cutout Panel Mounting for Wall and Box Mount Receptacles EPT Wall and Box Mount Receptacles are usually front mounted to avoid clearance problems with bayonet pins and coupling nuts. imum Panel Thickness inches (mm) 12 Screw Height.087 (2.21).087 (2.21).087 (2.21).087 (2.21).212 (5.38).212 (5.38) With Backshell.1 (2.54).1 (2.54).1 (2.54).1 (2.54).1 (2.54).1 (2.54) Without Backshell.25 (6.35).25 (6.35).25 (6.35).25 (6.35).25 (6.35).25 (6.35) Dimensions in inches (mm) 12 H.603 (15.3).730 (18.5).855 (21.7).979 (24.9) 1.3 (31.1) 1.350 (34.3) R.719 (18.3).812 (.6).906 (23.0).969 (24.6) 1.157 (29.4) 1.252 (31.8) T.125 (3.18).125 (3.18).125 (3.18).125 (3.18).125 (3.18).125 (3.18) 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 435
EPT Series (26482) EPT 06 J 12 S C _ M Series Prefix EPT Style 00 Wall Mount Receptacle 01 Cable Coupler 02 Box Mount Receptacle (Class E Only) 06 Straight Plug Connector Service Class Class E Environmental seal for individual wires Class M Environmental housing seal with Metric Backshell. Up to IP 67 based on threaded accessory. (add xx modification code at the end) Class J Watertight IP 67 seal, metric backshell & strain relief (SKINTOP MSM, MSRM) for jacketed cable (add xxx modification code at the end) Class S Same as J type (with SKINTOP MSSC) for shielded jacketed cable (add xxx modification code at the end.) Style P Pin S Socket Type C crimp lternate Insert Orientation Blank Normal Other These are special order. Consult for availability and minimums. Modification Codes xx Metric Thread Code (Class M) Metric x 1.5 Metric x 1.5 25 Metric 25 x 1.5 32 Metric 32 x 1.5 xxx Metric SKINTOP Code (Class J, S) (See Table 1) rrangement Code # of Oper. Code s mps Volts 6 6 7.5 600 7 7 7.5 600 12 12 7.5 600 12 8+4 7.5 +13 600 15 +1 7.5 + 13 600 18 18 7.5 600 19 19 7.5 600 23 +1 7.5 + 13 600 26 26 7.5 600 41 41 7.5 600 55 55 7.5 600 123 12 3 13 00 5 5 13 00 8 8 13 00 13 00 21 21 13 00 Code M R S M R S 25M 25R 25S 32M 32R 32S Metric SKINTOP Selection (Table 1) Thread SKINTOP Reference Cable OD Range Type mm inches M M M25 M32 12,, MSM MSRM MSSC MSM MSRM MSSC MSM MSRM MSSC MSM MSRM MSSC 5311 531121 531126 5311 531121 53112630 531130 53112130 53112640 5310 531120 53112650 4.5 2 7 4.5 9 7 13 5 7 12.5 9 17 6 13 9.5 11 21 7 15 11 21.177.394.079.276.177.354.276.512.197.394.276.492.354.669.236.512.354.650.433.827.276.591.433.827 Service Class J J S J J S J J S J J S 436
EPT Series (26482) Connector inserts follow standard MILC26482 configurations and are available with either all male or all female contacts. Insert No. of Voltage s Class Insert No. of Voltage s Class 6 1 6 8 2 8 6 8 7 1 7 23 1 1 7 23 3 2 3 26 1 26 12 123 26 1 2 12 5 2 5 41 1 41 5 41 12 1 4 8 21 2 21 12 21 15 1 1 55 1 55 15 55 18 18 1 18 19 1 19 19 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 437
EPT Series (26482) Wall Mount Receptacle (EPT00...) Class M M VV Thd CC Thd Lm K Class E Class J & Class S Ye Yj/Ys Le Lj/Ls Dimensions in Inches (Millimeters) 12.588 (.94).748 (19.0).873 (.17).998 (25.35) 1.248 (31.7) 1.373 (34.27) K.062 (.157).062 (.157).062 (.157).062 (1.57).094 (2.39).094 (2.39) Lm. 1.624 (41.3) 1.624 (41.3) 1.624 (41.3) 1.742 (44.3) 2.29 (58.2) 2.29 (58.2) Le 1.281 (32.54) 1.281 (32.54) 1.281 (32.54) 1.281 (32.54) 1.531 (38.89) 1.531 (38.89) Lj/Ls 2.608 (66.2) 2.709 (68.8) 2.709 (68.8) 2.903 (73.7) 3.596 (91.3) 3.596 (91.3) M.431 (.95).431 (.95).431 (.95).431 (.95).556 (.12).556 (.12) R.719 (18.26).812 (.63).906 (23.01).969 (24.61) 1.156 (29.36) 1.250 (31.75) S.954 (24.23) 1.047 (26.59) 1.1 (28.98) 1.234 (31.34) 1.453 (36.91) 1.578 (40.08) T.1 (3.05).1 (3.05).1 (3.05).1 (3.05).1 (3.05).1 (3.05) Ye.734 (18.64).858 (21.79).984 (24.99) 1.1 (28.19) 1.360 (34.54) 1.484 (37.82) Yj/Ys.894 (.7) 1.075 (27.3) 1.075 (27.3) 1.280 (32.5) 1.594 (40.5) 1.594 (40.5) cc Thread M M M M25 M32 M32 V Thread Class 2 9/24 11/24 13/ 15/ 1 3/18 1 5/18 pplication: Wall/ panel mounting connector. Mates with housing style EPT06. Note: L dimension equals total connector length including cable accessory. 438 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
EPT Series (26482) Box Mount Receptacle (EPT02...) Class E L M K 12.588 (.94).748 (19.0).873 (.17).998 (25.35) 1.248 (31.7) 1.373 (34.87) Dimensions in Inches (Millimeters) K L M N R S 1.3.431.062 (.157).062 (1.57).062 (1.57).062 (1.57).094 (2.39).094 (2.39) (33.53) 1.3 (33.53) 1.3 (33.53) 1.3 (33.53) 1.367 (34.72) 1.367 (34.72) (.95).431 (.95).431 (.95).431 (.95).556 (.12).556 (.12).558 (.27).688 (17.48).812 (.62).938 (23.83) 1.188 (30.18) 1.312 (33.32).719 (18.26).812 (.62).906 (23.01).969 (24.61) 1.156 (29.36) 1.250 (31.75).954 (24.23) 1.047 (26.59) 1.1 (28.98) 1.234 (31.34) 1.453 (36.91) 1.578 (40.08) T.1 (3.05).1 (3.05).1 (3.05).1 (3.05).1 (3.05).1 (3.05) pplication: Panel mounting connector. Mates with housing style EPT06. 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 439
EPT Series (26482) Cable Coupler Receptacle (EPT01...) Class M M CC Thd Ym Lm K Class E Class J & Class S Ye Yj/Ys Le Lj/Ls Dimensions in Inches (Millimeters) 12.588 (.94).748 (19.0).873 (.17).998 (25.35) 1.248 (31.7) 1.373 (34.27) K.094 (2.39).094 (2.39).094 (2.39).094 (2.39).115 (2.92).115 (2.92) Lm. 1.624 (41.3) 1.624 (41.3) 1.624 (41.3) 1.742 (44.3) 2.29 (58.2) 2.29 (58.2) Le 1.281 (32.54) 1.281 (32.54) 1.281 (32.54) 1.281 (32.54) 1.531 (38.89) 1.531 (38.89) Lj/Ls 2.608 (66.2) 2.709 (68.8) 2.709 (68.8) 2.903 (73.7) 3.596 (91.3) 3.596 (91.3) M.400 (.).400 (.).400 (.).400 (.).535 (13.59).535 (13.59) S.954 (24.23) 1.047 (26.59) 1.1 (28.98) 1.234 (31.34) 1.453 (36.91) 1.578 (40.08) G 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.344 (34.) 1.562 (39.67) 1.688 (42.88) Ym.791 (.1).947 (24.05).947 (24.05) 1.055 (26.8) 1.299 (33.0) 1.424 (36.2) Ye.734 (18.64).858 (21.79).984 (24.99) 1.1 (28.19) 1.360 (34.54) 1.484 (37.82) Yj/Ys.894 (.7) 1.075 (27.3) 1.075 (27.3) 1.280 (32.5) 1.594 (40.5) 1.594 (40.5) cc Thread M M M M25 M32 M32 pplication: Cable coupler receptacle. Mates with housing styles EPT06 Note: L* dimension equals total connector length including cable accessory. 440 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
EPT Series (26482) Straight Plug Connector (EPT06...) Class M CC Thd Ym Lm Class E Class J & Class S Ye Yj/Ys Lm Lj/Ls 12 Lm. 1.856 (47.15) 1.856 (47.15) 1.856 (47.15) 1.974 (50.) 2.398 (60.91) 2.398 (60.91) Dimensions in Inches (Millimeters) Le 1.513 (38.43) 1.513 (38.43) 1.513 (38.43) 1.513 (38.43) 1.638 (41.61) 1.638 (41.61) Lj/Ls 2.84 (72.) 2.941 (74.70) 2.941 (74.70) 3.135 (79.63) 3.704 (94.08) 3.704 (94.08) Q.926 (23.52) 1.043 (26.49) 1.183 (30.05) 1.305 (33.15) 1.531 (38.89) 1.656 (42.06) Ym.717 (18.21).834 (21.18).970 (24.61) 1.088 (27.64) 1.332 (33.83) 1.460 (37.08) Ye.734 (18.64).858 (21.79).984 (24.99) 1.1 (28.19) 1.360 (34.54) 1.484 (37.82) Yj/Ys.894 (.7) 1.075 (27.3) 1.075 (27.3) 1.280 (32.5) 1.594 (40.5) 1.594 (40.5) cc Thread M M M M25 M32 M32 pplication: Straight plug connector. Mates with housing styles EPT00...; EPT01...; EPT02... Note: L* dimension equals total connector length including cable accessory 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 441
EPT Series (26482) Panel Gasket Grommet Hole Seal Plug 12 Flat Panel Gasket 61U054 61U05411 61U05412 61U05413 61U054 61U05415 Color Red Blue 61U054 61U05417 Crimp s: Spares Only Basic connector includes contacts mm 2.23 0.5 0.5 1.5 WG 24 L1 inches (mm) 0.915 (23.2) 0.905 (23.0) L2 inches (mm) 0.854 (21.7) 0.844 (21.4) ød inches (mm).040 (1.0).063 (1.6) Pin 61U05381 61U05382 Socket 61U05383 61U05384 Strip Length inch (mm).375 (9.5).250 (6.35) Connector Dust Caps Plug Cap Receptacle Cap 12 Plug Cap* 61U05385 61U05386 61U05387 61U05388 61U05389 61U05390 EB Series Receptacle Cap + 61U05391 61U05392 61U05393 61U05394 61U05395 61U05396 0.2 * Protective plug caps for use with EPT06... connectors + Protective receptacle caps for use with EPT00...; EPT01...; and EPT02... connectors 0.2 442 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com
EPT Series (26482) Tool & ccessories mm 2.25.52.52 1.5 WG 24 Crimp Tool 61U05397 Turret Head 61U05398 Crimp Gage GoNo Go 61U05399 Insertion Tool 61U05406 61U05407 Removal Tool 61U05408 61U05409 SKINDICHT Reducers, Enlargers, and dapters For use with Class M connectors 12,, Class M Thread M M M25 M32 Reducers M/ M12 5243 M/ M 524312 M25/ M 5243 M32/ M25 5243 Enlargers M/ M 524452 M/ M25 524454 M25/M32 524456 M32/ M40 524458 Metric to NPT M/ 1/2 5400 M/ 1/2 5401 M25/ 3/4 540130 M32/ 1 540152 Metric to PG M/ PG7 5240 M/ PG9 5242 M25/ PG 524240 M32/ PG21 524260 Metric to PG B M/ PG 29 524340 M/ PG11 524360 M25/PG21 524400 M32/PG29 5244 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com 443
EPT Industrial Connectors The EPT Series connectors are ideal for use with industrial control, data, and servo feedback cables. Based on the specific application, a wide variety of cable/ connector combinations are possible. The tables below provide a sampling of the possibilities. pplication Stationary/ Flexible Continuous Flex Power OLFLE 190/ 190 CY OLFLE TRY II/ II CY OLFLE TC 600 OLFLE FD 890/ 890 CY OLFLE FD 891/ 891 CY OLFLE FD 890P/ 890 CP OLFLE FD 891P/ 891 CP OLFLE FD 890/ 890 CY OLFLE ROBOT 900 P Control OLFLE 190/ 190 CY OLFLE TRY II/ II CY OLFLE CONTROL M OLFLE CONTROL COLD OLFLE UTO I OLFLE TC 600 OLFLE FD 890/ 890 CY OLFLE FD 891/ 891 CY OLFLE FD 890P/ 890 CP OLFLE FD 891P/ 891 CP OLFLE FD 890/ 890 CY OLFLE ROBOT 900 P OLFLE FD UTO 444 8007743539 www.lappusa.com www.lappcanada.com www.lappmexico.com