ELECTRONIC LOGGING DEVICE. User Manual



Similar documents
Networkfleet 3500 Product Line Installation Guide

Vehicle Monitoring Quick Reference Guide

User Guide. Vehicle Diagnostics by Delphi

Actiontec Router Troubleshooting

FX-BTCVT Bluetooth Commissioning Converter Commissioning Guide

Troubleshooting the Verizon MI424WR Router

N600 WiFi USB Adapter

Fi TV Gold Quick Start Guide

Software Update Instructions

How To Use Textbuster On Android (For Free) On A Cell Phone

Verizon 9100EM Router Troubleshooting

Hello Modem. Today I would like

VersaLink 7500 Gateway Troubleshooting

Fi TV Gold Quick Start Guide

RouteShoot Users Guide Android

Troubleshooting Sprint Mobile Broadband USB Modem by Novatel Wireless TM (Ovation TM U727)

Ericsson W25. Mobile Networks. Quick Installation Guide

[USING THE NM150 WITH ADULTICIDING] July 13, 2015

User Guide. Your first steps to smart monitoring

GENUINE PARTS INSTALLATION INSTRUCTIONS

Nighthawk AC1900 WiF Range Extender

Wireless Genie Mini MODEL C41W

Before installation it is important to know what parts you have and what the capabilities of these parts are.

How to use a SMART Board

Technical and Troubleshooting. Guide AIRAVE 2.5

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

port may have a cover that, prior to installing the tracking device, will need to be removed.

Accessing vlabs using the VMware Horizon View Client for OSX

CareSentinel Set Up Guide for Android Devices

MODELS 8007 Gorilla Cycle Alarm 8017 Gorilla Cycle Alarm with 2-way pager system way pager system

b. If NO, we apologize for the inconvenience. Please go to our website and fill out a Technical Support ticket to resolve the issue.

GROUPTALK FOR ANDROID VERSION for Android

LandAirSea Tracking Key READ THIS BEFORE USING THE LANDAIRSEA TRACKING KEY

CRYPTOPAY QUICK START GUIDE

Thank you for purchasing the Mobile WiFi. This Mobile WiFi brings you a high speed wireless network connection.

TPG MOBILE BROADBAND QUICK SETUP GUIDE

Thank you for purchasing the Mobile WiFi. This Mobile WiFi brings you a high speed wireless network connection.

AUDITVIEW USER INSTRUCTIONS

Table of Contents. Use. Troubleshooting. Setup. Welcome. 11 How to arm/disarm system/camera(s) 19 Sync Module setup issues. 3 Installing the Blink app

GROM Interface Installation into Nissan and Infiniti cars using NIS02 vehicle specific harness

This guide will show you how to configure a Windows Mobile 6 PDA for Bluetooth connection to the KBM Systems OBDKey Bluetooth device.

SwannEye HD Plug & Play Wi-Fi Security Camera Quick Start Guide Welcome! Lets get started.

AUDITVIEW USER INSTRUCTIONS

Quick Start. is a trademark of ETSI.

Troubleshooting the Actiontec M1424WR Router

site monitoring Kit Site Monitoring Kit User Manual we prove it.

mysensors mysensors Wireless Sensors and and Cellular Gateway Quick Start Guide Information to Users Inside the Box

Installation Instructions

B890 4G LTE Smart Hub Getting Started Guide

Huawei E5220 Mobile Hotspot User Guide Contents

Networking. General networking. Networking overview. Common home network configurations. Wired network example. Wireless network examples

Configuration Guide Contigo Mobile Tracker

How To Use A Modem On A Pc Or Mac Or Ipad (For A Laptop)

Thank you for purchasing the Huawei E5332 Mobile WiFi. This quick start guide will help you to get started right away.

GTM 11. fm tmc traffic receiver. owner s manual. GTM 11 shown with the whip antenna

How To Use An Imclean Dad (Dvd) With A Car Or Car (Dcd) On A Computer Or Car

SwannEye HD Security Camera Wi-Fi Connections Quick Setup Guide. Welcome! Lets get started.

Apple MacBook/Pro/Air Laptop Guide Tech Tips & Common Issues

Contents. Business Everywhere user guide. 1. Introduction. 2. How to Install/Uninstall Business Everywhere. 3. The Business Everywhere interface

To get times into Arena Managemnt program, from the Farm Tek Timer Console.

Remote Online Support

PUSH BUTTON START INSTALLATION MANUAL

IMMS-CCC. IMMS-CCC Hardwire Central Interface. Installation Instructions

Checking the Package Contents. Installing the Printer Software. Connecting. Unpacking the. the Printer. Printer. Attaching

Alarm Security Kit - NVR

Mobile Broadband Manager Guide Huawei E8278

ZeppelinAir AirPlay. set up

OM2260VW2 USER MANUAL VERIZON WIRELESS HOME PHONE CONNECT

Manual. Start accepting card payments with payleven

Intermedia Cloud Softphone. User Guide

The FlexiSchools Online Order Management System Installation Guide

The Child Reminder System Installation Manual

PIGCHAMP MOBILE. PigCHAMP Knowledge Software. Installation Guide for Mobile Units

How to use SURA in three simple steps:

EASE Scan Tool Customers. SECTION I - Installation

Getting Started. Linksys RE1000 Wireless-N Extender

User Guide HUAWEI UML397. Welcome to HUAWEI

USER MANUAL V5.0 ST100

TE100-P21/TEW-P21G Windows 7 Installation Instruction

10/ English Edition 1. Quick Start Guide. NWA1100N-CE CloudEnabled Business N Wireless Access Point

i ChatterBox! Motorcycle Security

Pocket Verifier Quick Start HTC Touch Diamond

Dealer Tutorial. Uplink Customer Service UPLINK 2010 Uplink Security, LLC. All rights reserved.

Installation Fleet Tracker (SBC3)

mysensors mysensors Wireless Sensors and Ethernet Gateway Quick Start Guide Information to Users Inside the Box mysensors Ethernet Gateway Quick Start

Troubleshooting Guide

Your Digital Adapter Easy Setup Guide

ReachFree ID Installation Instructions For Portal TI, Sentinel and C-Start. Unitec

Wireless Joey High/Standard Definition Uses Wireless Joey Access Point. Receivers Wireless Joey

DSL Installation Guide

AIRAVE 2.5 User Guide

If you need additional assistance please contact our Technical Support Center at 24 hours a day, 7 days a week.

USER GUIDE AC2600 MU-MIMO GIGABIT ROUTER. Model# EA8500

User Guide VERIZON WIRELESS HOME PHONE CONNECT

Uplink GPS Vehicle Tracking User Guide

Quick Reference Guide

a. If necessary update the Beamage-3.0 s firmware, using the BeamageUpdater (refer to p.7);

One of the following messages will appear in red when DisplayStudio is not properly connected to a media player on the wireless network.

The FlexiSchools Online Order Management System Installation Guide

Wireless Network Guide

Transcription:

ELECTRONIC LOGGING DEVICE User Manual

Installing Your HD 100 > Installation Instructions Installing your HD 100 can take as little as 10 minutes. Installation instructions are provided here, as well as quick diagnostic information so you can verify your device is working correctly. Box contents * : HD 100 device HD 100 device tray Get Started card User Manual Driver and DOT Quick Reference card * Does not include IntelliRoute TND 720 device E-Log sticker for vehicle 9-pin power cable USB-to-Mini USB cable Adhesive mounting strips (2) Screws and nuts (4) Cable ties (4) Installation Instructions 1. Locate the truck s diagnostic port. Connect the cable to the port and turn the collar on the cable end to lock it in place. NOTE: For information on alternative installation options, refer to the Alternative Installation Options on page 13. 2. Route the cable from the diagnostic port to the location you selected for mounting the HD 100 device, making sure to place it on a flat surface, away from any vents and any locations where it may interfere with the driver. NOTE: Tuck the cable in the space between the windshield and the dash. 8 HD 100 User Manual

Installing Your HD 100 > Installation Instructions 3. Connect the HD 100 to the cable and place it (with the tray attached) on the flat surface. 4. Make sure the area selected is clean and dry. Peel the protective layer off one side of the adhesive mounting strips and place on the bottom of the HD 100 tray. Then peel off the other protective layer, and place the device with tray attached on your dash in the desired location, pressing firmly to secure it to the dash surface. NOTE: Do not cover the HD 100 device or place anything over it, as this may interfere with the GPS signal. HD 100 User Manual 9

Installing Your HD 100 > Installation Instructions 5. Once the HD 100 device is mounted and connected to the vehicle, turn on your engine. The four colored lights on the side of the device should illuminate within about 20 seconds, indicating that the device is connected and running properly. For more information on how the colored lights work, refer to the Quick Diagnostics section on page 12. Power (Red) Cell (Green) 6. Now, mount your IntelliRoute TND 720, if it is not already. Then, turn on your IntelliRoute TND 720 device. You will first see the IntelliRoute software Home Menu. Click the HD 100 button on this screen. NOTE: Because your IntelliRoute TND 720 displays your Hours of Service logs and helps you keep track of your compliance, Rand McNally recommends that you keep your IntelliRoute TND 720 plugged in with the charging cable while in use with the HD 100. Wi-Fi (Yellow) JBus (Blue) HD 100 IntelliRoute TND 720 10 HD 100 User Manual 7. Once the HD 100 software loads, log on by entering the Driver ID you created when activating your device through the Rand McNally Dock, then tap Submit. NOTE: You can also refer to the Rand McNally HD 100 Activation email you received after you completed the activation process. Your log-in information is provided in this email for your records.

Installing Your HD 100 > Quick Diagnostics Quick Diagnostics Once your HD 100 and IntelliRoute TND 720 are installed in your truck, follow the Quick Diagnostic steps to ensure your system is working properly. 1. Verify HD 100 Connectivity. Ensure the four colored lights are on. These lights indicate that the HD 100 is connected and running properly. The JBus (Blue) light should turn on soon after connecting. If the Power (Red), Wi-Fi (Yellow), or Cell (Green) lights remain flashing or off for more than 3 minutes after you connect your HD 100 device to the diagnostic port with the power cable, then there may be an error. Refer to the Troubleshooting section on page 14. 4. Once you log into the HD 100 software, verify GPS and ECM connectivity. Select the Diagnostics tab, then the GPS sub-tab. Confirm GPS status is good by verifying that there are values in the Latitude and Longitude fields. For more information on the Diagnostics tab, refer to page 52. Drive the truck at least 0.2 miles. Select the SysInfo icon from the HD 100 Home Menu. Select Diagnostics, then the JBus sub-tab. Confirm that there is an odometer value in the Eng. odom. field. Once you confirm all of these items are operating correctly, the system is ready to use. 2. Confirm access to HD 100 Home Menu. Click the HD 100 icon on IntelliRoute Home Menu. Log into the HD 100 software with your Driver ID. Confirm that the HD 100 Home Menu screen is visible. 3. Once you log on to the HD 100 software, confirm Cell icon is visible on status bar. For more information on the status bar, refer to page 24. HD 100 User Manual 11

Installing Your HD 100 > Quick Diagnostics Power Port Mini-USB Port Power (Red) Cell (Green) Wi-Fi (Yellow) JBus (Blue) Reset Button External Antenna Port* Power (Red) Wi-Fi (Yellow) Cell (Green) JBus (Blue) On Flashing Off On Flashing Off On Flashing Off On Off Device Powered On System alert (HOS alerts) No power/device turned off Connected Attempting to connect Not connected Connected Attempting to connect Not connected Connected Not connected *For use with external antenna when installing the HD 100 device behind the dash or under the seat. 12 HD 100 User Manual

Installing Your HD 100 > Alternative Installation Options Alternative Installation Options Accessories and parts for alternative installations can also be purchased at randmcnally.com/fleetaccessories. 9- to 6-pin Cable Adapter: For use in trucks with a 6-pin-compatible diagnostic port Contact Rand McNally Customer Support at 1-800-641-RAND (7263) or fleetsupport@randmcnally.com for more information on alternative installation options. Customer may select from various professional installation options. A list of certified installers can be found at randmcnally.com/hd100installation. External Antenna: For use with the HD 100 when installing behind the dash or under the seat HD 100 User Manual 13

Installing Your HD 100 > Troubleshooting Troubleshooting This section covers basic troubleshooting scenarios. For the most up-to-date troubleshooting information, refer to randmcnally.com/hd100troubleshooting. NOTE: To remain compliant, you must keep paper logs if your HD 100 or IntelliRoute TND 720 is not functioning properly. Red light is off for more than 3 minutes after connecting HD 100 to diagnostic port (No power on HD 100 device): Check power connection on HD 100 device. - Ensure the cable is secured to the truck s diagnostic port and to the HD 100 device. Disconnect, then reconnect both ends of the power cable, making sure the collar on the diagnostic port end of the cable is locked in place. Check that the red light turns on. The red light should illuminate within about 20 seconds, indicating that the device is receiving power from the vehicle. Nothing appears on the IntelliRoute TND 720 screen: Make sure your IntelliRoute TND 720 is charged and powered on. 14 HD 100 User Manual

Installing Your HD 100 > Troubleshooting Yellow or Green lights stay off for more than 3 minutes after connecting HD 100 to diagnostic port (Wi-Fi or Cell not connecting on HD 100 device): Make sure your IntelliRoute TND 720 device is charged and within 10 feet of the HD 100 device. Push the Reset button on the side of the HD 100 device. Check power connection on HD 100 device. - Ensure the cable is secured to the truck s diagnostic port and to the HD 100 device. Disconnect, then reconnect both ends of the power cable, making sure the collar on the diagnostic port end of the cable is locked in place. Make sure truck ignition is on. Restart the ignition. Check that the colored lights are on. The colored lights should illuminate within about 20 seconds, indicating that the HD 100 is connected and running properly. NOTE: If, after following these steps, the green Cell light stays off, this may indicate that you are currently located in an area without Cell coverage. If you do not have Cell coverage, you may continue to log on to the HD 100 software with your Driver ID and use the HOS application, provided you have logged in at least once before with that particular Driver ID. Your HD 100 will continue to capture your Hours of Service data, and once you regain Cell connectivity, your Hours of Service data will update. Cannot access the HD 100 software, after clicking the HD 100 button from the IntelliRoute Home Menu: Make sure your IntelliRoute TND 720 device is within 10 feet of the HD 100 device. Wait up to 3 minutes for the colored lights on the HD 100 device to illuminate. Push the Reset button on the side of the HD 100 device. Blue light is still off for more than 3 minutes after connecting HD 100 to diagnostic port (JBus is not responding on HD 100 device): Make sure truck ignition is on. Restart the ignition. Restart both the IntelliRoute TND 720 and HD 100 devices. - Log off the HD 100 software. - Press the Power button on your IntelliRoute TND 720 device. - Disconnect the cable from your HD 100 device. - Reconnect the cable to your HD 100 device. Check that the blue light turns on. The blue light should illuminate within about 20 seconds, indicating that the device is connected to the vehicle s ECM. HD 100 User Manual 15