6ES7315-2AG10-0AB0 Page 1 Product data sheet 6ES7315-2AG10-0AB0 SIMATIC S7-300, CPU 315-2DP CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 128 KBYTE WORKING MEMORY 2. INTERFACE DP-MASTER/SLAVE MICRO MEMORY CARD NECESSARY Product version Hardware product version 01 Firmware version V2.6 associated programming package Supply voltages Rated value 24 V DC permissible range, lower limit (DC) permissible range, upper limit (DC) external protection for supply cables (recommendation) Current consumption Current consumption (rated value) Current consumption (in no-load operation), typ. Inrush current, typ. I²t Current consumption/ power loss Power loss, typ. Memory Work memory integrated expandable Load memory pluggable (MMC) pluggable (MMC), max. Data management on MMC (after last programming), min. Backup present STEP 7 V 5.2 or higher + SP 1 with HW update 20.4 V 28.8 V Min. 2 A 0.8 A 60 ma 2.5 A 0.5 A² s 2.5 W 128 Kibyte ; For program and data 8 Mbyte 10 a ; guaranteed by MMC (maintenance-free)
6ES7315-2AG10-0AB0 Page 2 without battery CPU/ blocks Number of blocks (total) DB ; Program and data 1024 ; (DBs, FCs, FBs OBs, SDBs); the maximum number of loadable blocks can be reduced by the MMC being used. Number, max. 1023 ; Number band: 1 to 1023 FB Number, max. 1024 ; Sequence of numbers: 0 to 2047 FC Number, max. 1024 ; Sequence of numbers: 0 to 2047 OB Number of free cycle OBs 1 ; OB 1 Number of time alarm OBs 1 ; OB 10 Number of delay alarm OBs 1 ; OB 20 Number of watchdog interrupts 1 ; OB 35 Number of process alarm OBs 1 ; OB 40 Number of DPV1 alarm OBs 3 ; OB 55, 56, 57 Number of startup OBs 1 ; OB 100 Number of asynchronous error OBs 1 ; OB 80 Number of synchronous error OBs 2 ; OB 121, 122 Nesting depth per priority class 8 additional within an error OB 4 CPU/ processing times for bit operations, min. 0.1 µs for word operations, min. 0.2 µs for fixed point arithmetic, min. 2 µs for floating point arithmetic, min. 3 µs Times/counters and their retentivity S7 counter Number 256
6ES7315-2AG10-0AB0 Page 3 Retentivity can be set lower limit 0 upper limit 255 preset 8 Counting range can be set lower limit 0 upper limit 999 IEC counter present Type SFB Number Unlimited (limited only by RAM capacity) S7 times Number 256 Retentivity can be set lower limit 0 upper limit 255 preset no retentivity Time range lower limit 10 ms upper limit 9990 s IEC timer present Type SFB Number unlimited (limited only by RAM capacity) Data areas and their retentivity Flag Number, max. 2048 byte Retentivity available ; MB 0 to MB 2047 Retentivity preset MB 0 to MB 15 Number of clock memories 8 ; 1 memory byte Data blocks Number, max. 1023 ; Number range: 1 to 1023
6ES7315-2AG10-0AB0 Page 4 Retentivity adjustable ; via non-retain property on DB Retentivity preset yes Local data per priority class, max. 1024 byte ; per block max. 510 Address area I/O address area Inputs 2 Kibyte Outputs 2 Kibyte of which, distributed Inputs 2 Kibyte Outputs 2 Kibyte Process image Inputs 128 byte Outputs 128 byte Digital channels Inputs 16384 Outputs 16384 Inputs, of which central 1024 Outputs, of which central 1024 Analog channels Inputs 1024 Outputs 1024 Inputs, of which central 256 Outputs, of which central 256 Hardware configuration Racks, max. 4 Modules per rack, max. 8 Number of DP masters integrated 1 via CP 4 Number of operable FMs and CPs (recommended) FM 8 CP, point-to-point 8 CP, LAN 10
6ES7315-2AG10-0AB0 Page 5 Time of day Clock Hardware clock (real-time clock) battery-backed and synchronizable Backup time Deviation per day, max. Runtime meter Number 1 Number/Number range 0 6 wk ; at 40 C ambient temperature Range of values 0 to 2^31 hours (when using SFC 101) Granularity retentive Clock synchronization to MPI, master to MPI, slave to DP, master to DP, slave in AS, master in AS, slave on Ethernet via NTP S7 message functions Number of login stations for message functions, max. Process diagnostic messages simultaneously active Alarm-S blocks, max. 40 Test commissioning functions Status/control Status/control variable Variables Number of variables, max. 30 of which status variables, max. 30 of which control variables, max. 14 Forcing Forcing 10 s 1 hour ; Must be restarted at each restart ; on DP slave only time-of-day slave 16 ; Depending on the connections configured for PG/OP and S7 basic communication Inputs, outputs, memory bits, DB, times, counters
6ES7315-2AG10-0AB0 Page 6 Status block Single step Number of breakpoints 2 Diagnostic buffer present Number of entries, max. 100 can be set Communication functions PG/OP communication Routing Global data communication Number of GD loops, max. 8 Number of GD packets, max. 8 Number of GD packets, transmitter, max. 8 Number of GD packets, receiver, max. 8 Size of GD packets, max. Size of GD packet (of which consistent), max. S7 basic communication User data per job, max. User data per job (of which consistent), max. S7 communication as server as client User data per job, max. User data per job (of which consistent), max. S5-compatible communication Number of connections overall 16 usable for PG communication 15 reserved for PG communication 1 22 byte 22 byte 76 byte 76 byte ; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server) ; via CP and loadable FB 180 byte ; With PUT/GET 64 byte ; as server ; via CP and loadable FC
6ES7315-2AG10-0AB0 Page 7 Adjustable for PG communication, max. 15 usable for OP communication 15 reserved for OP communication 1 adjustable for OP communication, max. 15 usable for S7 basic communication 12 Reserved for S7 basic communication 0 adjustable for S7 basic communication, max. 12 usable for routing 4 1st interface Type of interface Integrated RS 485 interface Physics RS 485 Isolated Power supply to interface (15 to 30 V DC), max. 200 ma Functionality MPI DP master DP slave Point-to-point connection MPI Number of connections 16 Services PG/OP communication Routing Global data communication S7 basic communication S7 communication S7 communication, as client S7 communication, as server Transmission speeds, max. 187.5 kbit/s 2nd interface Type of interface integrated RS 485 interface Physics RS 485 Isolated Power supply to interface (15 to 30 V DC), max. 200 ma Functionality
6ES7315-2AG10-0AB0 Page 8 MPI DP master DP slave Point-to-point connection DP master Number of connections, max. 16 Services PG/OP communication Routing Global data communication S7 basic communication ; I blocks only S7 communication S7 communication, as client S7 communication, as server Equidistance mode support Isochronous mode SYNC/FREEZE DPV1 Transmission speeds, max. 12 Mbit/s Number of DP slaves, max. 124 ; Per station Address area Inputs, max. 2048 byte Outputs, max. 2048 byte User data per DP slave Inputs, max. 244 byte Outputs, max. 244 byte DP slave Number of connections 16 Services PG/OP communication Routing ; with interface active Global data communication S7 basic communication S7 communication, as client S7 communication, as server
6ES7315-2AG10-0AB0 Page 9 Direct data exchange (slave-to-slave communication) DPV1 GSD file Transmission speeds, max. automatic baud rate search Transfer memory Inputs Outputs Address area, max. 32 User data per address area, max. CPU/ programming Programming language STEP 7 LAD FBD STL SCL CFC GRAPH HiGraph Command set Nesting levels 8 [nicht versorgt: TAK_ABT744_001_000] User program protection/password protection System functions (SFC) System function blocks (SFB) Dimensions and weight Dimensions and weight Width Height Depth Weight Weight, approx. The current GSD file can be obtained from: http://www.siemens.de/profibus-gsd 12 Mbit/s ; only with passive interface 244 byte 244 byte 32 byte ; V 5.2 SP1 or higher with HW update See instruction list see instruction list see instruction list 40 mm 125 mm 130 mm 290 g Status Apr 26, 2010