CPU PN/DP. Function
|
|
|
- Darcy Burns
- 7 years ago
- Views:
Transcription
1 CPU PN/DP Function Password protection; a password concept protects the user program from unauthorized access. Block encryption; the functions (FCs) and function blocks (FBs) can be stored in the CPU in encrypted form by means of S7-Block Privacy to protect the know-how of the application. Diagnostics buffer; the last 500 error and interrupt events are stored in a buffer for diagnostic purposes, of which 100 are stored retentively. Maintenance-free data backup; the CPU automatically saves all data (up to 700 KB) in case of power failure so that the data are available again unchanged when the power returns. Page 1084 Mar 2008 Siemens ITS
2 Parameterizable properties The S7 configuration as well as the properties and response of the CPUs can be parameterized using STEP 7: General: Definition of the name, plant designation and location designation. Startup; definition of the startup characteristics of the CPU and the monitoring time Isochronous mode interrupts; setting of the DP master system, sub-process image number and delay time Cycle/clock memory; specification of the maximum cycle time and load. Setting of the clock memory address. Enabling prioritized HMI communication Retentivity; setting retentive areas Clock interrupts; setting the start date, start time and periodicity Watchdog interrupts; setting of periodicity System diagnostics; determining handling and scope of the diagnostic alarms Clock; setting the type of synchronization in the AS or on the MPI Protection level; specifying the access rights to program and data Communication; reservation of connection resources Page 1085 Mar 2008 Web; Siemens ITS
3 settings for the Web server of the CPU MPI/PROFIBUS DP interface; setting the interface type. Determining node addresses. Parameterizing the operating mode and configuring the transfer areas in the case of PROFIBUS DP. Parameterizing the time synchronization PROFIBUS DP master/slave interfaces; user-defined address assignment for distributed I/O. Parameterizing the operating mode and configuring the transfer areas in the case of PROFIBUS DP. Parameterizing the time synchronization PROFINET interface; Setting the addresses. Parameterizing the PROFINET properties, the I-Device functionality, the type of synchronization on PROFINET, the time synchronization using NTP procedure, the media redundancy, and the KeepAlive function. Parameterizing port 1 and port 2 Display and information functions Status and error indications; LEDs indicate hardware, programming, time, I/O and bus errors, and operating statuses such as RUN, STOP and start-up. In addition, maintenance requirements are displayed Test functions; the PG is used to indicate signal states during program execution, to modify process variables independently of the user program and to output the contents of stack memories. Information functions; Page 1086 Mar 2008 Siemens ITS
4 the PG can be used to obtain information about the memory capacity and operating mode of the CPU, the current loading of the work and load memory, current cycle times and diagnostics buffer content in plain text. Integrated communication functions PG/OP communication Global data communication S7 basic communication S7 communication S5-compatible communication Routing Data record routing PROFIBUS DP master/slave Open communication over TCP/IP, UDP and ISO-on-TCP (RFC1006) PROFINET IO controller PROFINET I-Device PROFINET CBA Web server System functions The CPU provides many extensive system functions for diagnostics, parameterization, synchronization, alerting, time measurement, etc. For detailed information, refer to the manual. Technical specifications Page 1087 Mar 2008 Siemens ITS
5 Technical specifications 6ES EL00-0AB0 Product version Hardware product version 09 Firmware version V2.8 General information associated programming package STEP 7 V5.4 + SP5 or higher or STEP 7 V5.4 + SP4 or higher with HSP 186 Supply voltage 24 V DC Input current Current consumption (rated value) ma Current consumption (in no-load operation), 400 ma typ. Inrush current, typ. 4 A I²t 1.2 A² s Power losses Power loss, typ. 14 W Memory Work memory integrated Kibyte expandable Page 1088 Mar 2008 Siemens ITS
6 Size of retentive memory for retentive data 700 kbyte blocks Load memory pluggable (MMC) pluggable (MMC), max. 8 Mbyte Data management on MMC (after last 10 a programming), min. Backup present ; Guaranteed by MMC (maintenancefree) without battery ; Program and data CPU-blocks Number of blocks (total) 4 096; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used. DB Number, max ; Number range: 1 to Size, max. 64 Kibyte FB Number, max ; Number range: 0 to 7999 Size, max. 64 Kibyte FC Number, max ; Number range: 0 to 7999 Size, max. 64 Kibyte Page 1089 Mar 2008 Siemens ITS
7 OB Size, max. 64 Kibyte Nesting depth per priority class 16 additional within an error OB 4 CPU processing times for bit operations, min µs for word operations, min µs for fixed point arithmetic, min µs for floating point arithmetic, min µs Counters, timers and their retentivity S7 counter Number Retentivity adjustable 0 lower limit upper limit Z 0 to Z 7 preset Counting range Page 1090 Mar 2008 Siemens ITS
8 adjustable 0 lower limit 999 upper limit IEC counter present Type SFB Number Unlimited (limited only by RAM capacity) S7 times Number Retentivity adjustable 0 lower limit upper limit retentivity preset Time range 10 ms lower limit Page 1091 Mar 2008 Siemens ITS
9 9 990 s upper limit IEC timer present Type SFB Number Unlimited (limited only by RAM capacity) Data areas and their retentivity retentive data area, total All, max. 700 KB Flag Number, max byte Retentivity available ; MB 0 to MB 8191 Retentivity preset MB 0 to MB 15 Number of clock memories 8; 1 memory byte Data blocks Retentivity adjustable ; via non-retain property on DB Retentivity preset Local data per priority class, max byte; Max bytes per block Address area I/O address area Inputs byte Outputs byte of which, distributed byte Page 1092 Mar 2008 Siemens ITS
10 8 192 byte Inputs byte Outputs Process image Inputs, adjustable byte Outputs, adjustable byte Inputs, default 256 byte Outputs, default 256 byte Subprocess images Number of subprocess images, max. 1 Digital channels integrated channels (DI) 0 integrated channels (DO) 0 Inputs Outputs Inputs, of which central Outputs, of which central Analog channels Integrated channels (AI) 0 Integrated channels (AO) 0 Inputs Outputs Inputs, of which central 256 Page 1093 Mar 2008 Siemens ITS
11 Outputs, of which central 256 Hardware configuration Racks, max. 4 Modules per rack, max. 8 Expansion devices, max. 3 Number of DP masters integrated 2 via CP 4 Number of operable FMs and CPs (recommended) FM 8 CP, point-to-point 8 CP, LAN 10 Time of day Clock Hardware clock (real-time clock) battery-backed and synchronizable Deviation per day, max. 10 s Backup time Behavior of the clock following expiry of backup period Operating hours counter Number 4 Number/Number range 0 to 3 6 wk; At 40 C ambient temperature Clock continues to run with the time at which the power failure occurred Page 1094 Mar 2008 Siemens ITS
12 Range of values 0 to 2^31 hours (when using SFC 101) Granularity 1 hour retentive ; Must be restarted at each restart Clock synchronization supported to MPI, master to MPI, slave to DP, master ; With DP slave only slave clock to DP, slave in AS, master in AS, slave on Ethernet via NTP ; as client 1st interface Type of interface Integrated RS 485 interface Physics RS 485 Isolated Power supply to interface (15 to 30 V 150 ma DC), max. Functionality MPI DP master DP slave Point-to-point connection MPI Page 1095 Mar 2008 Siemens ITS
13 Number of connections 32 Services PG/OP communication Routing Global data communication S7 basic communication S7 communication ; but via CP and loadable FB S7 communication, as client S7 communication, as server Transmission rate, max. 12 Mbit/s DP master Services PG/OP communication Global data communication ; I blocks only Page 1096 Mar 2008 Siemens ITS
14 S7 basic communication S7 communication S7 communication, as client S7 communication, as server Equidistance mode support Isochronous mode SYNC/FREEZE Activation/deactivation of DP slaves Number of DP slaves that can be simultaneously activated/deactivated, max. Direct data exchange (slave-to-slave communication) DPV1 Page 1097 Mar 2008 Siemens ITS 8 ; As subscriber
15 Transmission rate, max. 12 Mbit/s Number of DP slaves, max. 124 Address area 8 Kibyte Inputs, max. 8 Kibyte Outputs, max. User data per DP slave 244 byte Inputs, max. 244 byte Outputs, max. DP slave Services PG/OP communication Global data communication S7 basic communication S7 communication S7 communication, as client Page 1098 Mar 2008 Siemens ITS
16 S7 communication, as server Direct data exchange (slave-to-slave communication) ; Connection configured on one side only DPV1 Transmission rate, max. 12 Mbit/s Automatic baud rate search ; only with passive interface Transfer memory 244 byte Inputs 244 byte Outputs Address area, max. 32 User data per address area, max. 32 byte 2nd interface Type of interface Integrated RS 485 interface Physics RS 485 Isolated Power supply to interface (15 to 30 V DC), 200 ma max. Functionality MPI Page 1099 Mar 2008 Siemens ITS
17 DP master DP slave PROFINET IO Controller PROFINET IO Device PROFINET CBA Local Operating Network DP master Services PG/OP communication Global data communication S7 basic communication S7 communication S7 communication, as client S7 communication, as server Equidistance mode support Isochronous mode ; I blocks only ; Connection configured on one side only ; OB 61 Page 1100 Mar 2008 Siemens ITS
18 SYNC/FREEZE Activation/deactivation of DP slaves 8 Number of DP slaves that can be simultaneously activated/deactivated, max. ; As subscriber Direct data exchange (slave-to-slave communication) DPV1 Transmission rate, max. 12 Mbit/s Number of DP slaves, max. 124 Address area 8 Kibyte Inputs, max. 8 Kibyte Outputs, max. User data per DP slave 244 byte Inputs, max. 244 byte Page 1101 Mar 2008 Siemens ITS
19 Outputs, max. DP slave Services PG/OP communication Global data communication S7 basic communication S7 communication S7 communication, as client S7 communication, as server Direct data exchange (slave-to-slave communication) DPV1 GSD file Transmission rate, max. Automatic baud rate search ; Connection configured on one side only The latest GSD file is available at: 12 Mbit/s ; only with passive interface Page 1102 Mar 2008 Siemens ITS
20 Transfer memory 244 byte Inputs 244 byte Outputs Address area, max. 32 User data per address area, max. 32 byte 3rd interface Type of interface PROFINET Physics Ethernet RJ45 Isolated Integrated switch Number of ports 1 Power supply to interface (15 to 30 V 0 ma DC), max. Automatic detection of transmission speed ; 10/100 Mbit/s Autonegotiation Autocrossing Functionality MPI DP master DP slave PROFINET IO Controller PROFINET IO Device Page 1103 Mar 2008 Siemens ITS
21 PROFINET CBA Local Operating Network PROFINET IO Controller Services PG/OP communication ; with loadable FBs, max. configurable S7 communication connections: 16, max. number of instances: 32 Isochronous mode ; Via TCP/IP, ISO on TCP, and UDP Open IE communication Transmission rate, max. 100 Mbit/s Number of connectable IO devices, max. 256 Max. number of connectable IO devices 256 for RT 256 of which in line, max. Number of IO devices with IRT and the 256 option "high flexibility" 61 of which in line, max. Prioritized Page 1104startup supported Mar 2008 Siemens ITS
22 Number of IO Devices, max. Activation/deactivation of IO Devices Number of IO Devices that can be simultaneously activated/deactivated, max. IO Devices changing during operation (partner ports), supported Max. number of IO devices per tool Device replacement without swap medium Send cycles 250 µs, 500µs, 1 ms Updating time 250 µs ms (with send cycle of 250 µs); 500 µs ms (with send cycle of 500 µs); 1 ms ms (with send cycle 1 ms); minimum value of the send cycle is also dependent on the set communication share for PROFINET IO, on the number of I/O devices, and on the volume of configured user data. Updating times 250 µs ms (with send cycle of 250 µs); 500 µs ms (with send cycle of 500 µs); 1 ms ms (with send cycle Page 1105 Mar 2008 Siemens ITS
23 1 ms); minimum value of the send cycle is also dependent on the set communication share for PROFINET IO, on the number of I/O devices, and on the volume of configured user data. Address area 8 Kibyte Inputs, max. 8 Kibyte Outputs, max. User data per address area, max. 254 byte User data consistency, max. Open IE communication Open IE communication, supported Number of connections, max. 32 Local port numbers used at the system end0, 20, 21, 23, 25, 80, 102, 135, 161, 8080, 34962, 34963, 34964, 65532, 65533, 65534, Communication functions PG/OP communication Data record routing Global data communication supported Page 1106 Mar 2008 Siemens ITS
24 Number of GD loops, max. 8 Number of GD packets, max. 8 Number of GD packets, transmitter, max. 8 Number of GD packets, receiver, max. 8 Size of GD packets, max. 22 byte Size of GD packet (of which consistent), 22 byte max. S7 basic communication supported User data per job, max. User data per job (of which consistent), max. S7 communication supported as server as client User data per job, max. S5-compatible communication supported Open IE communication 76 byte 76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server) ; via integrated PROFINET interface and loadable FB or via CP and loadable FB See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication) ; via CP and loadable FC Page 1107 Mar 2008 Siemens ITS
25 TCP/IP Number of connections, max. Data length for connection type 01H, max. Data length for connection type 11H, max. ISO-on-TCP (RFC1006) Number of connections, max. Data length, max. UDP Number of connections, max. Data length, max. Web server supported ; via integrated PROFINET interface and loadable FBs byte byte ; via integrated PROFINET interface and loadable FBs byte ; via integrated PROFINET interface and loadable FBs byte ; only read function Page 1108 Mar 2008 Siemens ITS
26 Number of HTTP clients 5 PROFINET CBA (at set setpoint communication load) Setpoint for the CPU communication load 20 % Number of remote interconnection partners 32 Number of functions, master/slave 50 Total of all Master/Slave connections Data length of all incoming connections byte master/slave, max. Data length of all outgoing connections byte master/slave, max. Number of device-internal and PROFIBUS interconnections Data length of device-internal und byte PROFIBUS interconnections, max. Data length per connection, max byte Remote interconnections with acyclic transmission Sampling frequency: Sampling time, min. Number of incoming interconnections 200 ms 100 Page 1109 Mar 2008 Siemens ITS
27 100 Number of outgoing interconnections byte Data length of all incoming interconnections, max byte Data length of all outgoing interconnections, max byte Data length per connection, max. Remote interconnections with cyclic transmission 1 ms Transmission frequency: Transmission interval, min. 300 Number of incoming interconnections 300 Number of outgoing interconnections byte Data length of all incoming interconnections, max byte Page 1110 Mar 2008 Siemens ITS
28 Data length of all outgoing interconnections, max. Data length per connection, max. HMI variables via PROFINET (acyclic) Number of stations that can log on for HMI variables (PN OPC/iMap) HMI variable updating Number of HMI variables Data length of all HMI variables, max. PROFIBUS proxy functionality supported Number of linked PROFIBUS devices Data length per connection, max byte 250 byte 3; 2x PN OPC/1x imap 500 ms byte byte; Slave-dependent Page 1111 Mar 2008 Siemens ITS
29 Number of connections Max. total number of instances 32 S7 message functions Number of login stations for message functions, max. Process diagnostic messages simultaneously active Alarm-S blocks, max. 300 Test commissioning functions Status/control Status/control variable Variables Number of variables, max. 30 of which status variables, max. 30 of which control variables, max. 14 Forcing 32; Depending on the configured connections for PG/OP and S7 basic communication Inputs, outputs, memory bits, DB, times, counters Forcing Force, variables Inputs, outputs Number of variables, max. 10 Status block ; Up to 2 simultaneously Single step Number of breakpoints 4 Diagnostic buffer Page 1112 Mar 2008 Siemens ITS
30 present Number of entries, max. 500 adjustable 100 Of which powerfail-proof Number of entries readable in RUN, max. ; From 10 to 499 adjustable 10 preset Isochronous mode Isochronous mode ; Via 2nd DP interface Ambient conditions Operating temperature Min. 0 C max. 60 C Configuration programming Programming language LAD FBD Page 1113 Mar 2008 Siemens ITS
31 STL SCL CFC GRAPH HiGraph Command set see instruction list Nesting levels 8 Know-how protection User program protection/password protection Dimensions Width 120 mm Height 125 mm Depth 130 mm Weight Weight, approx g 6ES EL01-0AB0 Product version Hardware product version 01 Page 1114 Mar 2008 Siemens ITS
32 Firmware version V3.2 General information associated programming package STEP7 V 5.5 or higher Supply voltage 24 V DC Input current Current consumption (rated value) ma Current consumption (in no-load operation), 500 ma typ. Inrush current, typ. 4 A I²t 1.2 A² s Power losses Power loss, typ. 14 W Memory Work memory integrated Kibyte expandable Size of retentive memory for retentive data 700 Kibyte blocks Load memory pluggable (MMC) pluggable (MMC), max. 8 Mbyte Data management on MMC (after last 10 a programming), min. Page 1115 Mar 2008 Siemens ITS
33 Backup present without battery CPU-blocks Number of blocks (total) 4 096; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used. DB Number, max ; Number range: 1 to Size, max. 64 Kibyte FB Number, max ; Number range: 0 to 7999 Size, max. 64 Kibyte FC Number, max ; Number range: 0 to 7999 Size, max. 64 Kibyte OB Size, max. 64 Kibyte Nesting depth per priority class 16 additional within an error OB 4 CPU processing times for bit operations, min µs for word operations, min µs Page 1116 Mar 2008 Siemens ITS
34 for fixed point arithmetic, min µs for floating point arithmetic, min µs Counters, timers and their retentivity S7 counter Number Retentivity adjustable 0 lower limit upper limit Z 0 to Z 7 preset Counting range adjustable 0 lower limit 999 upper limit IEC counter present Type SFB Page 1117 Mar 2008 Siemens ITS
35 Number Unlimited (limited only by RAM capacity) S7 times Number Retentivity adjustable 0 lower limit upper limit retentivity preset Time range 10 ms lower limit s upper limit IEC timer present Type SFB Number Unlimited (limited only by RAM capacity) Data areas and their retentivity retentive data area, total All, max. 700 KB FlagPage 1118 Mar 2008 Siemens ITS
36 Number, max byte Retentivity available ; MB 0 to MB 8191 Retentivity preset MB 0 to MB 15 Number of clock memories 8; 1 memory byte Data blocks Retentivity adjustable ; via non-retain property on DB Retentivity preset Local data per priority class, max byte; Max bytes per block Address area I/O address area Inputs byte Outputs byte Page 1119 Mar 2008 Siemens ITS
37 of which, distributed Inputs Outputs Process image Inputs, adjustable Outputs, adjustable Inputs, default Outputs, default Subprocess images Number of subprocess images, max byte byte byte byte 256 byte 256 byte Digital channels Inputs Outputs Inputs, of which central Outputs, of which central Analog channels Inputs Outputs Inputs, of which central 256 Outputs, of which central 256 Hardware configuration 1; With PROFINET IO, the length of the user data is limited to 1600 bytes Page 1120 Mar 2008 Siemens ITS
38 Racks, max. 4 Modules per rack, max. 8 Number of DP masters integrated 2 via CP 4 Number of operable FMs and CPs (recommended) FM 8 CP, point-to-point 8 CP, LAN 10 Time of day Clock Hardware clock (real-time clock) battery-backed and synchronizable Deviation per day, max. 10 s; Typ.: 2 s Backup time 6 wk; At 40 C ambient temperature Behavior of the clock following POWER- ON Clock continues running after POWER OFF Behavior of the clock following expiry of backup period Clock continues to run with the time at which the power failure occurred Operating hours counter Number 4 Number/Number range 0 to 3 Range of values 0 to 2^31 hours (when using SFC 101) Page 1121 Mar 2008 Siemens ITS
39 Granularity 1 hour retentive ; Must be restarted at each restart Clock synchronization supported to MPI, master to MPI, slave to DP, master ; With DP slave only slave clock to DP, slave in AS, master in AS, slave on Ethernet via NTP ; as client Interfaces Number of USB interfaces 0 1st interface Type of interface Integrated RS 485 interface Physics RS 485 Isolated Power supply to interface (15 to 30 V DC), 150 ma max. Functionality MPI DP master DP slave Point-to-point connection Page 1122 Mar 2008 Siemens ITS
40 MPI Services PG/OP communication Routing Global data communication S7 basic communication S7 communication S7 communication, as client S7 communication, as server Transmission rate, max. DP master Services PG/OP communication Global data communication ; but via CP and loadable FB 12 Mbit/s ; I blocks only Page 1123 Mar 2008 Siemens ITS
41 S7 basic communication S7 communication S7 communication, as client S7 communication, as server Equidistance mode support Isochronous mode SYNC/FREEZE Activation/deactivation of DP slaves Number of DP slaves that can be simultaneously activated/deactivated, max. Direct data exchange (slave-to-slave communication) DPV1 8 ; As subscriber Page 1124 Mar 2008 Siemens ITS
42 Transmission rate, max. 12 Mbit/s Number of DP slaves, max. 124 Address area 8 Kibyte Inputs, max. 8 Kibyte Outputs, max. User data per DP slave 244 byte Inputs, max. 244 byte Outputs, max. DP slave Services PG/OP communication Global data communication S7 basic communication S7 communication S7 communication, as client Page 1125 Mar 2008 Siemens ITS
43 S7 communication, as server Direct data exchange (slave-to-slave communication) ; Connection configured on one side only DPV1 Transmission rate, max. 12 Mbit/s Automatic baud rate search ; only with passive interface Transfer memory 244 byte Inputs 244 byte Outputs Address area, max. 32 User data per address area, max. 32 byte 2nd interface Type of interface Integrated RS 485 interface Physics RS 485 Isolated Power supply to interface (15 to 30 V 200 ma DC), max. Functionality MPI Page 1126 Mar 2008 Siemens ITS
44 DP master DP slave PROFINET IO Controller PROFINET IO Device PROFINET CBA DP master Services PG/OP communication Global data communication S7 basic communication S7 communication S7 communication, as client S7 communication, as server Equidistance mode support Isochronous mode ; I blocks only ; Connection configured on one side only ; OB 61 - isochronous mode is possible either on DP or PROFINET IO (not simultaneously) Page 1127 Mar 2008 Siemens ITS
45 SYNC/FREEZE Activation/deactivation of DP slaves 8 Number of DP slaves that can be simultaneously activated/deactivated, max. ; As subscriber Direct data exchange (slave-to-slave communication) DPV1 Transmission rate, max. 12 Mbit/s Number of DP slaves, max. 124 Address area 8 Kibyte Inputs, max. 8 Kibyte Outputs, max. User data per DP slave 244 byte Inputs, max. 244 byte Page 1128 Mar 2008 Siemens ITS
46 Outputs, max. DP slave Services PG/OP communication Global data communication S7 basic communication S7 communication S7 communication, as client S7 communication, as server Direct data exchange (slave-to-slave communication) DPV1 GSD file Transmission rate, max. Automatic baud rate search ; Connection configured on one side only The latest GSD file is available at: 12 Mbit/s ; only with passive interface Page 1129 Mar 2008 Siemens ITS
47 Transfer memory 244 byte Inputs 244 byte Outputs Address area, max. 32 User data per address area, max. 32 byte 3rd interface Type of interface PROFINET Physics Ethernet RJ45 Isolated Integrated switch Number of ports 2 Automatic detection of transmission speed ; 10/100 Mbit/s Autonegotiation Autocrossing Media redundancy supported Switchover time on line break, typically 200 ms; PROFINET MRP Number of stations in the ring, max. 50 Change of IP address at runtime, supported Functionality MPI DP master Page 1130 Mar 2008 Siemens ITS
48 DP slave PROFINET IO Controller PROFINET IO Device PROFINET CBA PROFINET IO Controller Services ; Also simultaneously with I-Device functionality ; Also simultaneously with IO Controller functionality PG/OP communication ; with loadable FBs, max. configurable S7 communication connections: 16, max. number of instances: 32 ; OB 61 - isochronous mode is possible Isochronous mode either on DP or PROFINET IO (not simultaneously) ; Via TCP/IP, ISO on TCP, and UDP Open IE communication Transmission rate, max. 100 Mbit/s Number of connectable IO devices, max. 256 Max. number of connectable IO devices 256 for RT 256 Page of 1131 which in line, max. Mar 2008 Siemens ITS
49 Number of IO devices with IRT and the option "high flexibility" of which in line, max. Number of IO Devices with IRT and the option "high performance", max. of which in line, max. Shared device, supported Prioritized startup supported Number of IO Devices, max. Activation/deactivation of IO Devices Number of IO Devices that can be simultaneously activated/deactivated, max. IO Devices changing during operation (partner ports), supported 8 Max. number of IO devices per tool Device replacement without swap medium Send cycles 250 μs, 500 μs,1 ms; 2 ms, 4 ms (not in Page 1132 Mar 2008 the case of IRT with "high flexibility" Siemens ITS
50 Updating time Address area Inputs, max. Outputs, max. User data per address area, max. User data consistency, max. PROFINET IO Device Services PG/OP communication Routing S7 communication Isochronous mode option) 250 µs to 512 ms (depending on the operating mode, see Manual "S7-300 CPU 31xC and CPU 31x, Technical Data" for more details) 8 Kibyte 8 Kibyte byte ; with loadable FBs, max. configurable connections: 16, max. number of instances: 32 Page 1133 Mar 2008 Siemens ITS
51 Open IE communication IRT, supported PROFIenergy, supported Shared device, supported Number of IO controllers with shared device, max. Transfer memory Inputs, max. Outputs, max. Submodules Number, max. User data per submodule, max. Open IE communication Open IE communication, supported ; Via TCP/IP, ISO on TCP, and UDP ; With SFB 73 / 74 prepared for loadable PROFIenergy standard FB for I- Device byte; Per IO Controller with shared device byte; Per IO Controller with shared device byte Page 1134 Mar 2008 Siemens ITS
52 Number of connections, max. 32 Local port numbers used at the system end0, 20, 21, 23, 25, 80, 102, 135, 161, 8080, 34962, 34963, 34964, 65532, 65533, 65534, Keep-alive function, supported Communication functions PG/OP communication Data record routing Global data communication supported Number of GD loops, max. 8 Number of GD packets, max. 8 Number of GD packets, transmitter, max. 8 Number of GD packets, receiver, max. 8 Size of GD packets, max. 22 byte Size of GD packet (of which consistent), 22 byte max. S7 basic communication supported User data per job, max. User data per job (of which consistent), max. S7 communication 76 byte 76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server) Page 1135 Mar 2008 Siemens ITS
53 supported as server as client ; via integrated PROFINET interface and loadable FB or via CP and loadable FB User data per job, max. See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication) S5-compatible communication supported ; via CP and loadable FC Open IE communication TCP/IP ; via integrated PROFINET interface and loadable FBs 32 Number of connections, max byte Data length for connection type 01H, max byte Data length for connection type 11H, max. Several passive connections per port, supported ISO-on-TCP (RFC1006) ; via integrated PROFINET interface and Page 1136 Mar 2008 Siemens ITS
54 loadable FBs 32 Number of connections, max byte Data length, max. UDP ; via integrated PROFINET interface and loadable FBs 32 Number of connections, max byte Data length, max. Web server supported Number of HTTP clients 5 User-defined websites PROFINET CBA (at set setpoint communication load) Setpoint for the CPU communication load 20 % Number of remote interconnection partners 32 Number of functions, master/slave 50 Total of all Master/Slave connections Data length of all incoming connections byte master/slave, max. Data length of all outgoing connections byte Page 1137 Mar 2008 Siemens ITS
55 master/slave, max. Number of device-internal and PROFIBUS interconnections Data length of device-internal und byte PROFIBUS interconnections, max. Data length per connection, max byte Remote interconnections with acyclic transmission 200 ms Sampling frequency: Sampling time, min. 100 Number of incoming interconnections 100 Number of outgoing interconnections byte Data length of all incoming interconnections, max byte Data length of all outgoing interconnections, max byte Data length per connection, max. Page 1138 Mar 2008 Siemens ITS
56 Remote interconnections with cyclic transmission 1 ms Transmission frequency: Transmission interval, min. 300 Number of incoming interconnections 300 Number of outgoing interconnections byte Data length of all incoming interconnections, max byte Data length of all outgoing interconnections, max. 450 byte Data length per connection, max. HMI variables via PROFINET (acyclic) 3; 2x PN OPC/1x imap Number of stations that can log on for HMI variables (PN OPC/iMap) 500 ms HMI variable updating Page 1139 Mar 2008 Siemens ITS
57 Number of HMI variables Data length of all HMI variables, max. PROFIBUS proxy functionality supported Number of linked PROFIBUS devices byte 240 byte; Slave-dependent Data length per connection, max. Number of connections Max. total number of instances 32 usable for routing S7 message functions Number of login stations for message functions, max. 32 X1 as MPI: max. 10; X1 as DP master: max. 24; X1 as DP slave (active): max. 14; X2 as DP master: max. 24; X2 as DP slave (active): max. 14; X3 as PROFINET: 48 max. 32; Depending on the configured connections for PG/OP and S7 basic communication Page 1140 Mar 2008 Siemens ITS
58 Process diagnostic messages simultaneously active Alarm-S blocks, max. 300 Test commissioning functions Status/control Status/control variable Variables Number of variables, max. 30 of which status variables, max. 30 of which control variables, max. 14 Forcing Inputs, outputs, memory bits, DB, times, counters Forcing Force, variables Inputs, outputs Number of variables, max. 10 Status block ; Up to 2 simultaneously Single step Number of breakpoints 4 Diagnostic buffer present Number of entries, max. 500 adjustable 100 Of which powerfail-proof Page 1141 Mar 2008 Siemens ITS
59 Number of entries readable in RUN, max. 499 ; From 10 to 499 adjustable 10 preset Isochronous mode Isochronous mode Ambient conditions Operating temperature Min. 0 C max. 60 C Configuration programming Programming language LAD FBD STL SCL ; Via 2nd PROFIBUS DP or PROFINET interface Page 1142 Mar 2008 Siemens ITS
60 CFC GRAPH HiGraph Command set see instruction list Nesting levels 8 Know-how protection User program protection/password protection Block encryption ; With S7 block Privacy Dimensions Width 120 mm Height 125 mm Depth 130 mm Weight Weight, approx g Page 1143 Mar 2008 Siemens ITS
SIMATIC S7-300, CPU 315-2DP CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 128 KBYTE WORKING MEMORY 2
6ES7315-2AG10-0AB0 Page 1 Product data sheet 6ES7315-2AG10-0AB0 SIMATIC S7-300, CPU 315-2DP CPU WITH MPI INTERFACE INTEGRATED 24 V DC POWER SUPPLY 128 KBYTE WORKING MEMORY 2. INTERFACE DP-MASTER/SLAVE
CPUs - CPU 315-2 PN/DP
Overview The CPU with a medium program memory and quantity framework High processing performance in binary and floating-point arithmetic Used as a central controller on production lines with central and
6ES7314-6CG03-0AB0. Supply voltages Rated value 24 V DC Yes permissible range, upper limit (DC) circuit breaker type B, min. 4 A
6ES7314-6CG03-0AB0 Page 1 Product data sheet 6ES7314-6CG03-0AB0 SIMATIC S7-300, CPU 314C-2DP COMPACT CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), INTEGRATED DP INTERFACE, INTEGRATED
6ES7313-5BF03-0AB0. Supply voltages Rated value 24 V DC Yes permissible range, upper limit (DC) circuit breaker type B, min. 4 A
6ES7313-5BF03-0AB0 Page 1 Product data sheet 6ES7313-5BF03-0AB0 SIMATIC S7-300, CPU 313C, COMPACT CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO 1 PT100, 3 FAST COUNTERS (30 KHZ), INTEGRATED 24V DC POWER SUPPLY,
SIMATIC S7-300. 5/30 SIPLUS digital modules 5/30 SIPLUS SM 322 digital output module. 5/31 Analog modules 5/31 SM 331 analog input module
/2 Central processing units /2 Standard CPUs /2 CPU 312 /2 CPU 314 /2 CPU 31-2 DP /2 CPU 31-2 PN/DP /3 CPU 317-2 PN/DP /17 Fail-safe CPUs /17 CPU 31F-2 DP /17 CPU 31F-2 PN/DP /18 CPU 317F-2 PN/DP /30 SIPLUS
6ES7 313-6BE01-0AB0 6ES7 313-5BE01-0AB0
4 SIMATIC S7-300 Central processing units CPU 312C to CPU 317F-2 DP CPU 317F-2 DP The failsafe CPU with a large program memory and quantity framework for demanding applications For configuration of a failsaf
http://support.automation.siemens.com/ww/view/en/4067870&td=1
6ES7316-2AG00-0AB0 SIMATIC S7-300, CPU 316 Technical / CAx data nmlkji Technical Data nmlkj CAx data As of 2010-01-24 Power supply Input voltage Rated value (DC) permissible range, lower limit (DC) permissible
Data sheet SLIO CPU 015 (015-CEFPR00)
Data sheet SLIO CPU 015 (015-CEFPR00) Technical data Order no. 015-CEFPR00 SLIO CPU 015 Module ID - General information Note - Features SPEED7 technology 256 kb work memory Memory extension (max. 512 kb)
SIMATIC S7-300 4/2 Introduction Function modules (continued) 4/4 Central processing units 4/38 SIPLUS central processing units 4/40 Digital modules
/2 Introduction /2 S7-300/S7-300F / Central processing units / CPU 312C to CPU 317F-2 DP /38 SIPLUS central processing units /38 SIPLUS CPU 312C, CPU 313C, CPU 31, CPU 315-2 DP /0 Digital modules /0 SM
S7-1500/S7-1500F Technical Data
Standard CPUs CPU 1511-1 PN CPU 1513-1 PN CPU 1515-2 PN Type Standard CPU Standard CPU Standard CPU Dimensions 35 x 147 x 129 mm 35 x 147 x 129 mm 70 x 147 x 129 mm Spare part availability after 10 years
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODULE A5 Programming the CPU 314C-2DP
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODULE T I A Training Document Page 1 of 25 Module This document has been written by Siemens AG for training
SIMATIC S7-300. 4/2 Introduction. 4/4 Central processing units. 4/34 Digital modules. 4/44 Analog modules. 4/55 F digital /analog modules
/2 Introduction / Central processing units /3 Digital modules / Analog modules /55 F digital /analog modules /61 Ex input/output modules /65 Function modules /65 FM 350-1 counter module /67 FM 350-2 counter
CP 342-5. Page 1342 Mar 2008 Siemens ITS
CP 342-5 Function The CP 342-5 provides access to different communication services of the PROFIBUS bus system: PROFIBUS DP (according to IEC 61158/61784, master or slave) PG/OP communication S7 communication
The CP 342-5 provides access to different communication services of the PROFIBUS bus system:
SIPLUS CP 342-5 Function The CP 342-5 provides access to different communication services of the PROFIBUS bus system: PROFIBUS DP (according to IEC 61158/61784, master or slave) PG/OP communication S7
The CP 342-5 FO provides access to different communication services of the PROFIBUS bus system:
CP 342-5 FO Function The CP 342-5 FO provides access to different communication services of the PROFIBUS bus system: PROFIBUS DP (according to IEC 61 158/61784, master or slave) PG/OP communication S7
S7-1500/S7-1500F Technical Data
CPU 1511-1 PN CPU 1513-1 PN CPU 1515-2 PN Type Standard CPU Standard CPU Standard CPU Dimensions 35 x 125 x 130 mm 35 x 125 x 130 mm 70 x 147 x 129 mm Spare part availability after 10 years 10 years 10
PROFINET the Industrial Ethernet standard. Siemens AG 2013. Alle Rechte vorbehalten.
the Industrial Ethernet standard is 100% Ethernet is Ethernet Ethernet is the established standard in the IT world for fast exchange of data (IEEE 802.3) is always full duplex simultaneous communication
Main Catalog 2012/2013 for specialists in automation and control technology
Main Catalog 2012/2013 for specialists in automation and control technology www.vipa.com Welcome to VIPA This is VIPA Specialists in automation and control systems. Developer in some to the most advanced
SIMATIC S7-1200. It s the Interplay that makes the difference. Siemens AG 2010. All Rights Reserved.
SIMATIC S7-1200 It s the Interplay that makes the difference SIMATIC S7-1200 Controller SIMATIC S7-1200 CPUs CPU 1211C 3 configurations per CPU Dimensions W x H x D (mm) CPU 1212C CPU 1214C DC/DC/DC, AC/DC/RLY,
S7 CPs for Industrial Ethernet - SIMATIC NET. S7-300 - Industrial Ethernet S7 CPs for Industrial Ethernet - CP 343-1 Advanced.
S7 CPs for Industrial Ethernet - CP 343-1 Advanced SIMATIC NET S7-300 - Industrial Ethernet S7 CPs for Industrial Ethernet - CP 343-1 Advanced Manual Preface Properties and services 1 Performance data
SIMATIC NET. S7-CPs for PROFIBUS. CP 443-5 Basic. Manual Part B3
SIMATIC NET S7-CPs for PROFIBUS Manual Part B3 CP 443-5 Basic 6GK7 443-5FX02-0XE0 Version 1 and higher (firmware version V4.0 and higher) for SIMATIC S7-400 / S7-400H Status and fault LEDs Mode selector
Siemens AG 2013. 6/56 Digital modules 6/56 SM 421 digital input module 6/59 SM 422 digital output module
Siemens AG 2013 SIMATIC S7-400 /2 Introduction /4 Central processing units /4 Standard CPUs /4 CPU 412 /8 CPU 414 /13 CPU 41 /18 CPU 417 /21 SIPLUS Standard CPUs /21 SIPLUS CPU 412 /22 SIPLUS CPU 414 /23
SIMATIC. C7-621, C7-621 AS-i Control Systems. Volume 2 Working with C7 A B C D E. Contents. User Information. Introduction. Startup.
Contents User Information Introduction 1 Startup 2 SIMATIC C7-621, C7-621 AS-i Control Systems Volume 2 Working with C7 Manual Controlling Controlling with the C7 CPU 3 Addessing, Parameter Assignment,
SOFTLINK 300. CPU Specifications. Reference Manual
SOFTLINK 300 Reference Manual This manual is part of the documentation Package with the order number 300 314-1SL01 300 314-2DP01 300 315-2DP01 Edition 04/2011 i Preface Purpose of the manual This manual
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODUL E04
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODUL PROFINET with IO Controller CPU 315F-2 PN/DP and IO Device ET 200S T I A Training Document Page 1 of
Siemens AG 2011. 3/42 Analog modules 3/42 EM 231 3/42 EM 232 3/42 EM 235 3/47 EM 231 thermocouple module 3/49 EM 231 RTD module
Siemens AG 2011 /2 Introduction /4 Central processing units /4 CPU 221 /4 CPU 222 /4 CPU 224 /4 CPU 224 XP, CPU 224 XPsi /4 CPU 226 /24 SIPLUS central processing units /24 SIPLUS CPU 221 /25 SIPLUS CPU
S7-1200 and STEP 7 Basic V10.5
S7-1200 and STEP 7 Basic V10.5 S7-200 vs. S7-1200 Expandability S7-200 S7-1200 max. 7 Modules max. 3 Modules (CM) max. 8 Modules (SM) Page 2 Advantages of S7-1200, compared to S7-200 I/O Internal periphery
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODULE E05
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODULE PROFINET with IO-Controller CP343-1 Advanced and IO-Device ET 200S T I A Training Document Page 1 of
Product type designation. Display. Control elements
Data sheet SIMATIC HMI, KTP700 BASIC DP, BASIC PANEL, KEY AND TOUCH OPERATION, 7" TFT DISPLAY, 65536 COLORS, PROFIBUS INTERFACE, CONFIGURATION FROM WINCC BASIC V13/ STEP7 BASIC V13, CONTAINS OPEN SOURCE
SIMATIC S7-400 advanced controller
Siemens AG 2015 /2 Introduction /4 Central processing units /4 Standard CPUs /4 CPU 412 /8 CPU 414 /13 CPU 41 /18 CPU 417 /21 SIPLUS Standard CPUs /21 SIPLUS S7-400 CPU 412 /22 SIPLUS S7-400 CPU 414 /23
Technical Information POWER PLANT CONTROLLER
Technical Information POWER PLANT CONTROLLER Content The Power Plant Controller offers intelligent and flexible solutions for the control of all PV power plants in the megawatt range. It is suitable for
PROFINET IO Diagnostics 1
PROFINET IO is a very cost effective and reliable technology. However, extensive installations can have thousands of PROFINET IO devices operating on many networks. The reliable operation of these networks
SIMATIC NET. S7-CPs for Industrial Ethernet. CP 343-1 Lean. Manual Part B8. Version 1 or higher (Firmware Version V1.0) for SIMATIC S7-300 / C7-300
SIMATIC NET S7-CPs for Industrial Ethernet Manual Part B8 CP 343-1 Lean 6GK7 343-1CX00-0XE0 for SIMATIC S7-300 / C7-300 Version 1 or higher (Firmware Version V1.0) LED displays TP port: 8-pin RJ-45 jack
Permissible ambient temperature Operation Storage, transport
The Sitras PRO combined DC protective unit and controller is used in the power supply for DC railways in mass transit and main-line systems up 3,000 V DC. It protects DC switch gear and contact line systems
PROFINET. The leading. Industrial. Ethernet. Standard. The Benefits of PROFINET
PROFINET The leading The Benefits of PROFINET Industrial Ethernet Standard Automation Structure 2 ))) Automation system Industrial Ethernet Automation Structure 3 Network standard Ethernet High transmission
Configuring PROFINET
CHAPTER 9 This chapter describes how to configure the PROFINET feature on the Cisco IE 3000 switch. Understanding PROFINET, page 9-1, page 9-4 Displaying the PROFINET Configuration, page 9-5 Troubleshooting
Using the AnyBus -X Gateway to Communicate between a DVT camera and a Profibus Master
Using the AnyBus -X Gateway to Communicate between a DVT camera and a Profibus Master Page 1 of 13 Table of Contents 1 OVERVIEW... 3 2 INSTALLING AND CONFIGURING THE ANYBUS -X GENERIC GATEWAY AND ETHERNET
Cover sheet. Reading out the topology data of a PROFINET IO system SFB52 "RDREC" FAQ September 2009. Service & Support. Answers for industry.
Cover sheet Reading out the topology data of a PROFINET IO system FAQ September 2009 Service & Support Answers for industry. Question This entry originates from the Service&Support Portal of Siemens AG,
CP 343-1 BACnet 6FL4343-1CX10-0XE0 DESIGO S7. Used with DESIGO S7, Building Solution & Building Integration
s 9 291 9291P01 DESIGO S7 CP 343-1 BACnet 6FL4343-1CX10-0XE0 Used with DESIGO S7, Building Solution & Building Integration SIMATIC S7.300 CP 343-1 for Industrial Ethernet TCP/IP with BACnet communications
SIMATIC NET. CP 243-2 AS-Interface Master B C. Preface Contents. Technical Description and Installation Instructions Interface to the User Program
Preface Contents SIMATIC NET CP 243-2 AS-Interface Master Manual Technical Description and Installation Instructions Interface to the User Program 2 in the S7-200 CPU Access to the Data of the AS-i Slaves
Versions. Q.station Q.station T. Q.station D. Q.station DT x x
Most important features: Very high data rates up to 100 khz each channel 100 khz at 16 channels, 10 khz at 128 channels 64 Q.bloxx modules connectable Ethernet interface for configuration and data output
DATA COMMUNICATION BETWEEN PROGRAMMABLE LOGIC CONTROLLERS IN THE INDUSTRIAL DISTRIBUTION APPLICATIONS
DATA COMMUNICATION BETWEEN PROGRAMMABLE LOGIC CONTROLLERS IN THE INDUSTRIAL DISTRIBUTION APPLICATIONS Anna BYSTRICANOVA 1, Andrej RYBOVIC 1 1 Department of Mechatronics and Electronics, Faculty of Electrical
S7 for Windows S7-300/400
S7 for Windows S7-300/400 A Programming System for the Siemens S7 300 / 400 PLC s IBHsoftec has an efficient and straight-forward programming system for the Simatic S7-300 and ern controller concept can
C7 Control Systems PLC and Operator Panel in one device. Product Brief November 2003
C7 Control Systems PLC and Operator Panel in one device Product Brief November 2003 Overview, advantages, innovation SIMATIC C7 control systems comprising SIMATIC OP & S7-300 SIMATIC OP SIMATIC S7-300
SIMATIC. S7-300 CPU 31xT. Preface. Product Overview 1. Operator controls and indicators. Setting up an S7-300 with a Technology CPU
SIMATIC S7-300 SIMATIC S7-300 Manual Preface Product Overview 1 Operator controls and indicators 2 Setting up an S7-300 with a Technology CPU 3 Communication with S7-300 4 Memory concept 5 Cycle and response
SIMATIC NET. S7-CPs for Industrial Ethernet Configuring and Commissioning
SIMATIC NET S7-CPs for Industrial Ethernet Configuring and Commissioning Manual Part A - General Application Preface, Contents Communication in S7 Stations 1 Characteristics of the Ethernet CPs 2 Commissioning
Light scene push button 8gang comfort flush-mounted 751688xx
751688xx Documentation Product name: Light scene push button 8gang comfort Design: flush-mounting type (Up) ETS search path: Push button / Push button general / Light scene push button 8gang comfort Functional
Swiss Time Systems. The new multipurpose time server for the LAN and NTP-based Distributed Time System. by MOBATIME DTS 4138.
Proud Partners with MOBATime GPS or DCF 77 MOBA-NMS (Network Management Sy The new multipurpose time server for the LAN and NTP-based Distributed Time System by MOBATIME DTS 4138.timeserver The DTS 4138.timeserver
Applications & Tools. Configuration of Messages and Alarms in WinCC (TIA Portal) WinCC (TIA Portal) Application description December 2012
Cover Configuration of Messages and Alarms in WinCC (TIA Portal) WinCC (TIA Portal) Application description December 2012 Applications & Tools Answers for industry. Siemens Industry Online Support This
Overview and Applications of PROFINET. Andy Verwer Verwer Training & Consultancy Ltd
Overview and Applications of PROFINET Andy Verwer Verwer Training & Consultancy Ltd What exactly is PROFINET? PROFINET is an open Industrial Ethernet standard developed by the PROFIBUS Organisation. PROFINET
Software redundancy for SIMATIC S7 SIMATIC. S7-300/S7-400 Software redundancy for SIMATIC S7. Contents 1
Contents 1 How should I use this description? - A tip for 2 readers SIMATIC S7-300/S7-400 Software redundancy for SIMATIC S7 Function Manual Introduction 3 How software redundancy works 4 Blocks for software
Configuration limits for products of the SIMATIC NET PC Software V12 SIMATIC NET. Configuration limits for products of the SIMATIC NET PC Software V12
Configuration limits for products of the SIMATIC NET PC Software V12 Communications partners and configuration limits for HARDNET-PB DP-Base 1 software Configuration limits, SOFTNET-PB DP 2 SIMATIC NET
SIMATIC NET. S7-CPs for Industrial Ethernet. CP 343-1 Lean. Manual Part B. Release 09/2009 C79000-G8976-C198-06
SIMATIC NET S7-CPs for Industrial Ethernet Manual Part B CP 343-1 Lean 6GK7 343 1CX10 0XE0 as of hardware version 2, as of firmware version V2.2 for SIMATIC S7 300 / C7 300 LEDs TP port: 2 x 8-pin RJ-45
PCS0100en 02.2008. Persy Control Services B.V. Netherlands
P-Bus Gateway PBGW2.128 Universal gateway between the P-bus protocol and open standard protocols. The variety of available electrical interfaces on the gateway offers a wide range of possibilities for
Lecture 4 Profibus. Urban Bilstrup Urban.Bilstrup@ide.hh.se
Lecture 4 Profibus Urban Bilstrup Urban.Bilstrup@ide.hh.se Profibus Outline Introduction Profibus-DP Physical Layer Link Layer Application Layer 2 Profibus Introduction Three different versions of PROFIBUS
Fieldbus slave modules with I/Os, DIO
140 Fieldbus slave modules with I/Os, DIO 1534CF00 1534CH00 1534PF00 1534PH00 1536CH00 1536CL10 1536PH00 1536PL00 Order number 1534CF00 1534CH00 1534PF00 1534PH00 Figure Type SM 153, CANopen slave, DIO
SIMATIC. STEP 7 From S5 to S7. Preface, Contents Part 1: Planning Your Conversion. Introduction. Hardware. Converter Manual.
SIMATIC STEP 7 Converter Manual Preface, Contents Part 1: Planning Your Conversion Introduction 1 Hardware 2 Software 3 Part 2: Converting Programs Procedure 4 Preparing for Conversion 5 Conversion 6 Editing
TRAINING INDEX SIEMENS SIMATIC S7-200 S7-200 BASIC COURSE S7-200 ADVANCED COURSE SIEMENS SIMATIC S5 S5 STARTER S5 EXPERT
TRAINING INDEX SIEMENS SIMATIC S7-300/400 S7 BASIC COURSE S7 ADVANCED COURSE S7 ADVANCED DIAGNOSTICS S7 COMMUNICATION S7 ETHERNET S7 AS-I S7 OPC S7 PROFINET S7 LOOP CONTROL S7 GRAPH S7 SCL S7 DISTRIBUTED
Research of PROFIBUS PA s integration in PROFINET IO
3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015) Research of PROFIBUS PA s integration in PROFINET IO Zhijia Yang 1, a *, Zhongsheng Li 1,2,b, Feng Qiao 2
SIMATIC NET. Functions (FC) and function blocks (FB) for SIMATIC NET S7 CPs. Preface. Overview and general information on working with FCs and FBs
Preface Overview and general information on working with FCs and FBs 1 SIMATIC NET Functions (FC) and function blocks (FB) for SIMATIC NET S7 CPs Programming Manual FCs / FBs for Industrial Ethernet 2
SIMATIC. PLC S7-300, CPU Specifications CPU 312 IFM to CPU 318-2 DP A B. Preface, Contents
Preface, Contents SIMATIC PLC S7-300, CPU Specifications CPU 312 IFM to CPU 318-2 DP Reference Manual CPUs 1 CPU 31x-2 as DP Master/DP Slave and Direct Communication 2 Cycle and Reaction times 3 CPU Function,
Bellplast S.R.L. www.caipe.com Informe del Dpto. Técnico
- CPU 306 EX - CPU306EX Performance Indexes K306EX-14AT K306EX-24AR CPU Program Execution DI Points DO Points Application Memory Program Backup Memory Area 16-bit industrial Typical Bool instruction time:
applicomio Profibus-DP
BradCommunications Profibus-DP network interface cards allow deterministic I/O data acquisition for PC-based control applications. Features New! Support of Windows 32-bit and 64-bit (WoW64) Support of
VisorALARM-Manager Application Quick Guide. (Ver. 1.3) Dm 380-I. V:3.0
VisorALARM-Manager Application Quick Guide. (Ver. 1.3) Dm 380-I. V:3.0 1. Installation Requirements 1.1. PC Pentium III processor or higher. Minimum RAM memory: 128 Mbytes Operating system: Windows XP
TEXT DISPLAY TD17 LC DISPLAY, BACK-LIT LED, 4X20/8X40 LINES X CHARACTERS F0R SIMATIC S5,505,S7,M7 NATIVE DRIVERS, PROFIBUS-DP12
6AV3017-1NE30-0AX0 Page 1 Product data sheet 6AV3017-1NE30-0AX0 TEXT DISPLAY TD17 LC DISPLAY, BACK-LIT LED, 4X20/8X40 LINES X CHARACTERS F0R SIMATIC S5,505,S7,M7 NATIVE DRIVERS, PROFIBUS-DP12 Supply voltage
Cover. SEB SIMOTION Easy Basics. Collection of standardized SIMOTION basic functions. FAQ April 2011. Service & Support. Answers for industry.
Cover SEB SIMOTION Easy Basics Collection of standardized SIMOTION basic functions FAQ April 2011 Service & Support Answers for industry. 1 Preface 1 Preface The SEB is a collection of simple, standardized
OPERATOR PANEL OP7/DP LC DISPLAY, BACKLIT LED 4 LINES, 20 CHARACTERS/LINE, SIMATIC S7, M7, PROFIBUS-DP 1.5 MBAUD UL/CSA-LISTED
6AV3607-1JC20-0AX1 Page 1 Product data sheet 6AV3607-1JC20-0AX1 OPERATOR PANEL OP7/DP LC DISPLAY, BACKLIT LED 4 LINES, 20 CHARACTERS/LINE, SIMATIC S7, M7, PROFIBUS-DP 1.5 MBAUD UL/CSA-LISTED Supply voltage
Ponto Series. A new concept for automation
Ponto Series A new concept for automation Programmable Controller Remote I/O for Field Buses Special models of I/O modules Web connection Ponto Series Programmable Controller High connectivity CPUs Direct
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODULE C2. High Level Programming with S7-SCL
Training Document for Comprehensive Automation Solutions Totally Integrated Automation (T I A) MODULE High Level Language Programming with S7-SCL T I A Training Document Page 1 of 34 Module High Level
1 Application Description... 3. 1.1 Objective... 3 1.2 Goals... 3
Contents Moxa Technical Support Team support@moxa.com 1 Application Description... 3 1.1 Objective... 3 1.2 Goals... 3 2 System Topology... 3 3 Hardware and Software Requirements... 4 4 Configuration...
PROCESS AUTOMATION PLANNING AND INTEGRATION INFORMATION LB8106* Integration in Siemens SIMATIC PCS 7
PROCESS AUTOMATION PLANNING AND INTEGRATION INFORMATION LB8106* Integration in Siemens SIMATIC PCS 7 With regard to the supply of products, the current issue of the following document is applicable: The
Cut down your costs, increase your productions efficiently with the knowledge of PLC s Siemens technology. SITRAIN TM THAILAND Page 1 of 14
Training Center Digital Factory and Process Industries & Drives 1. Introduction 2. Course content 3. Course Schedule 4. Terms and Condition 5. Registration Channel Page 1 of 14 1. Introduction SITRAIN
Programmable set for Ethernet Modbus/TCP in IP20 TI-BL20-PG-EN-8
CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps LEDs for display of supply voltage, group and bus errors as well as status and diagnostics Connection
6AV3617-1JC30-0AX1. Type of voltage. UPS connectable (serial) Backup battery. minimum backup duration Memory. Flash / RAM.
6AV3617-1JC30-0AX1 Page 1 Product data sheet 6AV3617-1JC30-0AX1 OPERATOR PANEL OP17/DP12 LC DISPLAY, BACKLIT LED 4X20/8X40 LINESXCHARACTERS SIMATIC S5, 505, S7, M7, NATIVE DRIVERS, PROFIBUS-DP 12 MBAUD,
CPU systron S 200 - S 250 - S 250c. systron S 200 - S 250 - S 250c. CPUs to the process modules. Stand-alone PLC
E031019 000823 systron S 200 - S 250 - S 250c CPU systron S 200 - S 250 - S 250c 45 mm width Flexible and expandable Easy to use software for bus connection (S 250/ S 250c) CPUs to the process modules
S7-400H SIMATIC. Fault-tolerant systems S7-400H. Preface 1 Fault-tolerant automation systems. S7-400H setup options 3.
SIMATIC Fault-tolerant systems System Manual 12/2010 A5E00267695-07 Preface 1 Fault-tolerant automation systems 2 setup options 3 Getting Started 4 Assembly of a CPU 41x H 5 Special functions of a CPU
Hirschmann Networking Interoperability in a
Automation and Network Solutions Hirschmann Networking Interoperability in a PROFInet Environment Hirschmann Interoperability White Paper Rev. 1.1 Contents Hirschmann Networking Interoperability in a Profinet
Temperature & Humidity SMS Alert Controller
Temperature & Humidity Alert Controller METERS 3 simple steps starting the unit: Insert the SIM card Plug in the sensors connectors Connect the AC power cord. Specifications: AC 90~260V Auto Select Internal
The most powerful PLC. Product Brief January 2003
The most powerful PLC Product Brief January 00 Introduction The S7-00 is the most powerful PLC in the SIMATIC Controller family; the range that enables successful automation solutions with Totally Integrated
I.S. 1 remote I/O system Redundant coupling via PROFIBUS DP
I.S. 1 remote I/O system Redundant coupling via PROFIBUS DP 1. Functions An I. S. 1 fieldstation can be equipped with a primary and a redundant central unit (), whereby each has its own independent PROFIBUS
SIMATIC. System Software for S7-300 and S7-400 Program Design A B C D. Programming Manual C79000-G7076-C506-01. Preface, Contents
SIMATIC System Software for S7-300 and S7-400 Program Design Programming Manual Preface, Contents How to Design Control Programs 1 Structuring the User Program 2 Organization Blocks and Executing the 3
Automating with STEP7 in LAD and FBD
bisk Automating with STEP7 in LAD and FBD Programmable Controllers SIMATIC S7-300/400 by Hans Berger Publicis MCD Verlag Contents Indroduction 19 1 SIMATIC S7-300/400 Programmable Controller... 20 1.1
VIPA System 500S. SPEED7 - CPU 515-2AJ02 Manual
VIPA System 500S SPEED7 - CPU 515-2AJ02 Manual HB145E_CPU RE_515-2AJ02 Rev. 10/23 June 2010 Copyright VIPA GmbH. All Rights Reserved. This document contains proprietary information of VIPA and is not to
FAQ Communication over IE
FAQ Communication over IE S7 communication between S7-200 and S7-300/400 FAQ Table of Contents Table of Contents... 2 Question...2 How do I configure a S7 connection to exchange data between S7-200 and
JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410
The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a
Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2
Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male
SMS GSM Alarm Messenger
SMS GSM Alarm Messenger Data Logging Alarm Input Relay Output Voice Temperature Humidity Analog Input Capture and Send Data via SMS Report triggered alarm via SMS Output triggered via SMS Auto pick up
154 PHOENIX CONTACT Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370 Main Office: (650) 588-9200-Outside Local
154 PHOENIX CONTACT PROFINET The future-oriented system solution PROFINET is the realtime Ethernet approach that can be used in all industrial motion control fields - from factory automation to process
SOLARCARE SERIES PRODUCT AND APPLICATION GUIDE
SOLARCARE SERIES PRODUCT AND APPLICATION GUIDE for solar energy management LEATEC Delivering Solutions for Energy Management SOLAR ENERGY DATA CENTER BUILDING 4 to8 String Monitoring with 0.% Accuracy
Applications & Tools. Configuration and Diagnostics of a PROFINET IO System. PROFINET IO Configuration Example. Application Description January 2010
Cover Sheet Configuration and Diagnostics of a PROFINET IO System PROFINET IO Configuration Example Application Description January 2010 Applications & Tools Answers for industry. Industry Automation and
DCS Data and communication server
8 58 PLD.TOWER PLD.RACK VISONIK DCS Data and communication server PLD.TOWER PLD.RACK Data and communication servers (DCS) are used as management stations in building automation and control (BAC). With
Introduction to PROFIBUS and PROFINET
Introduction to PROFIBUS and PROFINET Andy Verwer Technical Officer for PROFIBUS UK Verwer Training & Consultancy Ltd Gold distributor PROFIBUS Characteristics PROFIBUS is a bi-directional digital communication
Automating with STEP 7 in STL and SCL
Berger Automating with STEP 7 in STL and SCL Automating with STEP7 in STL and SCL Programmable Controllers SIMATIC S7-300/400 by Hans Berger 6 th revised and enlarged edition, 2012 Publicis Publishing
SNMP Web Management. User s Manual For SNMP Web Card/Box
SNMP Web Management User s Manual For SNMP Web Card/Box Management Software for Off-Grid Inverter Version: 1.2 Table of Contents 1. Overview... 1 1.1 Introduction... 1 1.2 Features... 1 1.3 Overlook...
s Preface SIMATIC Configuring Hardware and Communication Connections with STEP 7 Contents Basics of Configuring Hardware with STEP 7 1
s Preface SIMATIC Configuring Hardware and Communication Connections with STEP 7 Manual This manual is part of the documentation package with the order number: 6ES7810-4CA08-8BW0 Contents Basics of Configuring
INTEGRATED MONITORING RECEIVER WITH MICRO SERVER STAM-IRS. 1. Features. 2. Description
INTEGRATED MONITORING RECEIVER WITH MICRO SERVER STAM-IRS stam-irs_en 01/11 STAM-IRS is a dedicated server to be used with the STAM-2 monitoring station which enables receiving transmissions sent via telephone
Automating witfi STEP7 in LAD and FBD
Automating witfi STEP7 in LAD and FBD Programmable Controllers SIMATIC S7-300/400 by Hans Berger 2nd revised edition, 2001 Publicis MCD Corporate Publishing Contents Contents Indroduction 19 1 SIMATIC
PROFINET Diagnostics Software and Tools
PROFINET Diagnostics Software and Tools Dr. Xiu Ji Static wiring test, diagnostics Live system diagnostics Basics of PROFINET Content PROFINET Diagnostics by Dr. Xiu Ji, Page 2 What is PROFINET? PROFINET
WWW.Processcontrol.mihanblog.com
Contents File: PRO1_02E.1 Information and Page From Process to Project... 2 STEP 7 Tools... 3 Starting the SIMATIC Manager... 4 SIMATIC Manager Menus and Toolbars... 5 The Toolbar in the SIMATIC Manager...
Start-up of IVI-KHD2-4HRX, IVI-KHA6-4HRX at S7-300 V1.1. Table of Contents TABLE OF CONTENTS... 1
Table of Contents TABLE OF CONTENTS... 1 1. DESCRIPTION OF HARDWARE... 2 1.1 Modules and devices... 2 1.2 Set-up and installation... 2 2. SETTING UP PARAMETERS... 2 2.1 Setting up parameters in accordance