DCS Data and communication server

Transcription

1 8 58 PLD.TOWER PLD.RACK VISONIK DCS Data and communication server PLD.TOWER PLD.RACK Data and communication servers (DCS) are used as management stations in building automation and control (BAC). With DDC technology, the DCSs, as superposed system components, allow for customer-specific solutions of all building automation and control tasks. Use The DCS' application range comprises a large number of building automation and control tasks such as: Process station communication at the subsystem level. Processing of acquired process data in real time. Continuous storage of selected process values (temperatures, setpoints, etc.). Monitoring of technical installations. Output of higher commands (e.g. peak load control, emergency power and network restoration). Logging of plant faults. Alarming of internal and external service organizations. Sending clear text messages based on technical plant events. Triggering reactions based on various causes: Time, date, process value changes and operating hours (maintenance). Simultaneous execution of various BAC tasks (multitasking). CMN858en Building Technologies

2 Presentation of process values, consumption variables, efficiency degrees and further operational and technical system information in transparent displays. Operation of system-wide BAC functions via graphical user interfaces. Connection of linked and third-party systems. Operation of building automation and control systems via networks. Type summary The PLD-series of the DCS data and communication server consists of two housing types with scalable software licenses and hardware options. Tower housing: 9 rack housing: PLD.TOWER PLD.RACK DCS for 0 00 subsystems Option : Number of subsystems 0, 5, 5, 50, 75, 00, 50, 00 Option : VISONIK Version V Option : R-server redundant server operation System configuration Example for a VISONIK system configuration: Printer Insight Printer Printer System link via SDLC Ring, V. port or network Operating Level (Management Level Network) DCS PLD... BPS Building Level Network (SDLC) BPS BPS PVS PRV CFE TEC controllers Floor level Network (FLN) Link to foreign system NetBPS EcuBPS PRV BPS CFE / Siemens DCS Data and communication server PLD.TOWER / RACK CMN858en Building Technologies

3 Basic hardware The data and communication server is delivered with the following hardware components: We reserve the right to make changes to the basic hardware configuration. Required number of server types PLD... Basic PC Caution: The computers are delivered without keyboard and monitor! Tower Rack Order number Housing tower PLD.TOWER Housing rack PLD.RACK Mouse CPU hard drive supporting - mouse - keyboard - LAN, x RJ5 - COM serial RS-3-C (9-pin) - 0 USB interfaces (3 x front, x back, 3 x internal) - RAID5/ controller for SAS base units - I/O slots PCI-Express x - I/O slot PCI-Express x - I/O slots PCI-Express x8 - I/O slot PCI 3-bit / 33MHz, x long, 5V - SATA controller ( ports used for accessible drives) - VGA graphics (5-pin) Intel XENON processor X350 / memory. GHz Quad Core / GB DDR3 PC-M multifunction card with: - Watchdog - Radio clock - Auto reset WD - Front control panel including cable set Network card on main disk Storage media: DVD-RW 5.5 Hot plug hard drive SAS GB.5 ALD.F Basic software The data and communication server is delivered with the following preinstalled software: Server type PLD. Tower Rack Microsoft Windows Server Bit VISONIK software (functionality according to version and computer type) VISONIK DCS license for 0 process stations VT00 emulator to connect terminals in a window to $T Siemens DCS Data and communication server PLD.TOWER / RACK CMN858en Building Technologies /

4 Options The following software and hardware components can be installed in addition to the basic installation. We reserve the right to make changes to the basic hardware configuration. Possible number for server types PLD... Tower Rack Order number PCIe- graphics card, 5 MB for higher performance PCI analog modem with USB interface PCI ISDN modem with USB unterface PCI audio card PLD.G5/E ALD.ANALOG ALD.ISDN ALD.AUDIO Uninterrupted power supply (UPS) APC SU-000 Redundant power supply ALD.USV ALD.RPS Equipment for connection of BLNs. SDLC/FSK kit to operate SDLC rings incl.: - PC-S express card - Connection cable to SDLC plug panel - SDLC plug panel x5 D-sub ALD.S/KIT Equipment for additional interfaces: Terminal server ( x V. interfaces), incl. - power supply (30 VAC / VDC) - adapter cables CBL-RJ5M9-50. Terminal server ( x V. interfaces), incl. - power supply (30 VAC / VDC) Terminal server (8 x V. interfaces), incl. - mains cable (30 VAC) - adapter cables.5m, type CBL-RJ5M adapter cables.5m, type CBL-RJ5M RJ5 loopback test plug - mounting brackets for 9 - rubber bases Terminal server ( x V. interfaces), incl. - mains cable (30 VAC) - 8 adapter cables.5m, type CBL-RJ5M adapter cables.5m, type CBL-RJ5M RJ5 loopback test plug - mounting brackets for 9 - rubber bases ALD.TS ALD.TS ALD.TS8 ALD.TS Storage media: RDX drive 80-0 GB for upgrades and data backup, incl. - RDX cartridge 0/30 GB DAT drive DDS-5 incl. - mounting kit - 3 tapes ALD.RDX ALD.DAT Hot plug hard drive GB SAS for expansion to RAID Hot plug hard drive GB SAS for expansion to RAID5 3 3 ALD.F ALD.F / Siemens DCS Data and communication server PLD.TOWER / RACK CMN858en Building Technologies

5 Computer performance characteristics Below is a list of performance features not readily apparent from the list of components and accessories above. Furthermore, a few important VISONIK system variables are listed. Options are printed in parentheses. Server types PLD... Tower Rack Basic feature: Upgradeability to higher PLD types and options Yes Yes Watchdog, reset, radio clock, control panel Yes Yes RAID or 5 (redundant array of independent disks) Yes Yes Interfaces: Serial interfaces - Terminal server x V. interfaces (RS3) - Terminal server x V. interfaces (RS3) - Terminal server 8 x V. interfaces (RS3) - Terminal server x V. interfaces (RS3) Standard Operation: Total number of terminals, printers and modems Standard Maximum* (5) (5) Maximum number of dial modems Operating system languages (3) (3) Number of access levels 5 5 Maximum number of concurrent users 5 5 System variables: Maximum number of connections for SDLC rings Maximum number of process stations (EKL-X, PRV, PRV, BPS, CFE ) on BLN (SDLC, Ethernet) or via modem Addressing (alphanumeric user address), number of characters Linked system: Number of VISONIK computers within linked system 0 0 Alarm printer for messages from various systems possible in each system Yes Yes Security VISONIK computer as R-server; redundant operation of VISONIK server possible as an option via network. Yes Yes *) The maximum number of 5 messaging channels or 8 terminal channels respectively per DCS cannot be exceeded. The indicated standard characters represent a recommendation. We reserve the right to make changes to the computer configuration. Documentation See the following data sheets for information on VISONIK subsystems: BPS process station Building process station BPS/NetBPS EcuBPS CMN830 CMN830 CMN8307 Siemens DCS Data and communication server PLD.TOWER / RACK CMN858en Building Technologies /

6 Technical data If not mentioned specifically, the following information applies to all computer types. Power supply Mains supply PLD.TOWER and PLD.RACK Mains frequency 00-0 V 50-0 Hz Dimensions Max. rated current: PLD.TOWER and PLD.0.RACK Active power W x D x H PLD.TOWER PLD.RACK PLD.RACK (installation depth) 00 V 0 V / A 3 A 58 W 05 x 58 x mm 8 x 570 x 0 mm 5 height units (U) Weight PLD.TOWER and PLD.RACK ca. 8 Kg (depending on configuration). Ambient conditions Operating temperature 0-35 C BLN data transmission System bus protocol SDLC/FSK V. data transmission Transmission rates for terminals, INSIGHT, printers and modems As per the specifications Network data transmission Europe conformity CE label according to EU directivies Global Transmission protocol Networks Rate of transmission EMC directive Low voltage guideline TCP/IP, NetBIOS via TCP/IP Ethernet 0/00/000 Mbps 00/08/EC 00/95/EC EN 30038, EN 5037, EN55 0, EN 550, EN 0950-, EN , EN CB, RoHS, WEE / 00 Siemens Switzerland Ltd Subject to change Siemens DCS Data and communication server PLD.TOWER / RACK CMN858en Building Technologies