Evolant Solutions Distribution System Series 71

Transcription

1 Evolnt Solutions Distriution System Series 71

2

3 Contents Introduction One of the leding Suppliers of MDF Products 04 An Excellent Qulity Mngement System 05 Technicl Principles Insultion Displcement Connection 06 Min Distriution Frme 07 Overvoltge / Overcurrent Protection 09 Description 10 Distriution Blocks of Series 71 4-pir Distriution Block 11 5-pir Distriution Block 12 Technicl Dt 13 Protection Mgzines of Series 71 Bsic product chrcteristics nd order numers 15 Accessories for Distriution System Connecting Cords 17 Disconnection nd Dummy Plugs, Mrking Cps 19 Termintion Tool, Extrction Tool, Tool for jumper support 20 Leling Sets 21 Additionl Informtion Contcts 22 3

4 One of the Leding Suppliers of MDF Products Corning Incorported is diversified technology compny with proud history of developing rekthrough innovtions tht significntly improve people s lives. We hve een chnging the world through innovtions for more thn 150 yers, integrting scientific discovery with mrket need. We focus on high-impct growth opportunities in the telecommunictions, flt pnel disply, environmentl, life sciences nd semiconductor industries. As erly s 1974, when fier optic technology ws still in its initil stge, Corning ws one of the originl pioneers, with expertise second to none. We were working with Europe s leding Pulic Telecommunictions compnies in developing tril fier optic cle routes. In 1977 cme the first fier optic route for Deutsche Telekom in Berlin. This ws followed in 1979 y further projects in the USA, mrking the strt of glol usiness with string of mjor commercil contrcts. In 2000 Corning grouped ll its cle, hrdwre nd equipment usinesses into division. now comprises the former Siecor Corportion, the communiction cles usiness from BICC (Corning Cles Ltd.), Siemens former Communiction Cles division nd RXS Kelgrnituren. In the re of copper cling, the mture Series 71 cme out in 1971 s n MDF product with IDC technology, followed y set of most successful products like in Series 5000 nd Series 1000RT. Tody disposes of more thn 35 yers of rich experience in successful copper IDC technology. Customers round the world pprecite Corning MDF products for performnce highest qulity nd reliility. 4

5 An Excellent Qulity Mngement System is relile prtner tht meets the communiction needs of its customers ll over the world with cost-effective solutions. Corning Cle systems stnds for technicl expertise, superior product qulity nd customized support services. Our qulity nd environmentl mngement systems re certified to DIN EN ISO 9001 nd ISO Our glol presence is your gin ecuse, wherever you re, Corning is close t hnd. 5

6 Technicl Principles Insultion Displcement Connection Doule IDC Contct Soldering methods were replced y connection techniques vi cutting insultion some decdes go. Through this chnge, time-consuming soldering, screwing or filling procedures hve een eliminted. With this technology, the wire is inserted in the IDC contct (Insultion Displcement Connection) y hnd nd pressed into it y using simple termintion / punch-down tool. The wire insultion is stripped during the termintion process in the IDC contct where the connection is mde. DIN IEC 352 descries the requirements for this soldering-, screw- nd stripping-free connection in detil. Functionl elements of Series 71 distriution locks re lwys fitted with doule IDC contcts. The doule contct llows interruption-free jumpering. This mens tht in ddition to the existing connection, e.g. jumpers from the suscrier to the system, second connection to new connecting point cn lso e estlished without interrupting the existing connection. The inry structure of the switching systems (8, 16 or 32 suscriers per line crd) is the reson tht distriution locks intended to connect the switching system lso hve inry structure, e.g. 4-pir functionl element in the cse of the Series 71 or n 8-pir functionl element in the Series The suscriers re generlly connected vi cles orgnized in groups of ten. Accordingly, the distriution locks hve n x 5 structure for the Series 71 (5-pir functionl element) or n x 10 structure for the Series 5000 (10-pir functionl element). The numer of system or suscrier lines to e connected per distriution lock depends minly on the pir count of the cles used. Most of the suscriers in the centrl office re therefore connected to the relevnt distriution locks using 100 or 200 pir cles. The sme pplies to the system side, where 128 wire pir cles re used. The ove descried systemtics is est supported y the 8- nd 10-pir distriution locks of the Series 5000 with 100, 128, 200 nd 512 wire pirs. Series 71 Distriution Blocks re less spce effective nd need twice the numer of functionl elements to support similr wire pir counts. As descried on pge 10, distriution lock siclly consists of metl chssis, functionl elements nd wire guides. The wire guides ensure tht the wires re clerly orgnized in the distriution lock. Ech wire pir is led to the relevnt IDC contcts through the wire guides. 6 The importnce of hving good wire nd cle orgniztion increses with the numer of users to e connected. The jumper com ssemlies of the distriution locks nd the jumpering loops of the distriution frmes re therefore just s importnt to good cle orgniztion s the wire guides.

7 Technicl Principles Min Distriution Frme Tsks Options for Appliction The min distriution frme (MDF) is the interfce etween the suscrier cles coming in from ll directions nd the switching system. The suscrier cles nd the system cles re ll led nd connected to the min distriution frme. The connection etween oth cle sides is implemented y jumpering. In ddition to connecting nd orgnizing ll cles, the min distriution frme lso provides the option to instll protection ginst overvoltge nd overcurrent for service technicins nd the switching system itself. Suscrier nd system cles cn e oth checked nd disconnected in the min distriution frme; xdsl splitters for dt trnsmission cn e instlled s well. Min distriution frmes re used wherever lrge numer of suscriers needs to e connected with the switching system, for exmple in networks of telecommunictions providers or in lrge uildings such s nks, insurnce compnies nd hedqurters of glol plyers. Jumpering All underground suscrier cles re connected to specific distriution components (line or suscrier lock) in the min distriution frme. Not every suscrier wire pir is necessrily connected to suscrier. By the sme token spre pirs in suscrier cles do not need to e connected to the switching system. Additionl suscrier wire pirs re only connected to the system if required. Frequently the switching system nd the min distriution frme my not e in the sme room or even on the sme floor. Given tht ech operting wire pir cnnot e guided to the switching system over severl floors, the required wire pirs re connected to n dditionl distriution component (system lock to which the system cles re connected). Thus the wire pirs in use re connected in stges to these distriution components. These connections re in turn connected to the switching system vi cles (e.g. 128 wire pirs). The cles cn then e led over severl floors to the switching system without ny difficulty. 7

8 Technicl Principles Distriution Frme Vritions Min distriution frmes cn e rrnged verticlly or verticlly / horizontlly nd re ville s wllmounted or free-stnding vrints. The choice of the distriution frmes depends on the loction s well s on the numer of suscriers tht hve to e connected. recommends tht merely verticl distriutors should e used for less thn 5,000-10,000 suscriers to e connected. If the numer of suscriers is higher, the need for cross jumpering increses. We therefore recommend using verticl / horizontl distriution frme which est supports cross jumpering etween the horizontl distriution locks. By compring the option for cross jumpering of oth MDF types, the difference ecomes ovious: in distriution frme with 13 horizontls there re 12 cross jumpering options, wheres most of the verticl distriution frmes offer cross-jumpering only ove nd elow the verticl distriution locks. Wll-mounted frme, verticl Wll-mounted frme, verticl / horizontl Free-stnding frme, verticl Free-stnding frme, verticl / horizontl Recommended for < suscriers Recommended for > suscriers Recommended for < suscriers Recommended for > suscriers 8

9 Technicl Principles Overvoltge Overvoltge / Overcurrent Protection Dmge cused y overvoltge / overcurrent is one of the most common cuses of mlfunctions in communiction devices. Overvoltge / overcurrent cn stop individul components or even result in the filure of entire centrl offices. Without sufficient protection, telecommuniction equipment is exposed to potentilly costly nd dngerous thret. Dmge cn e cused y lightning, electrosttic or electromgnetic interference or y power lines coming into contct with communictions lines. Primry protection ginst such dmge consists in inserting protection mgzines into the distriution components nd in grounding the system in ccordnce with the relevnt requirements. In the context of telecommunictions, distinction is mde etween the following types of protection: Overvoltge Protection (3-Point Protection) The overvoltge protection mgzines / plugs re fitted with 3-electrode rresters (see the circuit digrm on pge 27 et sqq.). In cse of overvoltge, n rc is generted in the rrester which dischrges the energy towrds the ground potentil. The rc is roken when the voltge flls elow the nominl response direct voltge of the rrester. This reversile procedure cn e repeted numer of times if necessry. Overcurrent Protection (2-Point Protection) The overcurrent single pir protector is fitted with PTCs, i.e. Positive Temperture Coefficient (see the circuit digrm on pge 27 et sqq.). When the nominl current of the PTC is exceeded, the component hets up nd the resistnce increses exponentilly. The PTC therefore limits the current. The PTC cools down in ccordnce with the lod nd then returns to its originl stte. This reversile procedure cn lso e repeted numer of times if necessry. 9

10 Technicl Principles Description The distriution components consist of the following elements: Metll chssis used for the stle mounting of the functionl elements nd wire guides 4- or 5-pir functionl elements re fitted with doule IDC contcts with nd without option for overvoltge protection Wire guides with doule chnnels guide the twisted wire pirs to the IDC contcts Jumper coms used to give cler structure to the designted undles of pirs per functionl element The following optionl elements my e ordered: Protection mgzine 3-point (overvoltge) protection mgzine with 3-electrode rresters 2-point (overcurrent) protection plug with polymer PTCs to e instlled from the front side 10 Accessories Termintion tool Leling sets (including lel holders nd covers) Lel strips Disconnection/dummy plugs Mrking cps Cle cover

11 Distriution Blocks with 4-Pir Functionl Elements Pirs Position Overvoltge Lels Weight Size Order Numer Protection Option [kg] [mm] H V H V H H x x x x x C39104-A61-A1 C39104-A65-A1 C39104-A66-A1 S30264-D1001-S44 C39104-A51-A1 C39104-A51-A4 H = Distriution locks for horizontl instlltion V = Distriution locks for verticl instlltion Scope of Delivery: Block + Leling Set For optionl mounting of protection mgzines or plugs, we offer the following types: 2-point protection plug 3-point protection mgzine S30264-D1004-S455 (120 ma) S30264-D1004-S282 (230 V; 10 ka) 11

12 Distriution Blocks with 5-Pir Functionl Elements Pirs Position Overvoltge Lels Weight Size Order Numer Protection Option [kg] [mm] 100 V 10 x C39104-A45-A1 100 V - 10 x C39104-A45-A2 100 V 1 x S30264-D1001-S V - 1 x S30264-D1001-S35 V = Distriution locks for verticl instlltion Scope of Delivery: Block + Leling Set For optionl mounting of protection mgzines or plugs, we offer the following types: 2-point protection plug 3-point protection mgzine 3-point protection mgzine S30264-D1004-S455 (120 ma) S30264-D1004-S501 (230 V; 20 ka) S30264-D1004-S502 (230 V; 10 ka) 12

13 Technicl Dt IDC Element: Contct principle cc. to DIN IEC 352 Spring mteril Contct force Contct surfce Suitle for: Insultion displcement connection for the ccomodtion of two lines per IDC terminl Spring ronze S23 > 10 N (0.4 mm wire core dimeter) Ag (4-7 µm) Solid conductor with dimeter of mm; Outside dimeter of mx. 1.2 mm Clmp for PCM wires with n outside dimeter of mx. 1.5 mm (with PE or PVC insultion) Service life A clmp for 0.35 to 0.6 mm Ø > 400 clmpings for 0.8 mm Ø connected on one side > 50 clmpings for 0.8 mm Ø comined with 0.6 mm Ø > 25 clmpings Volume resistnce t clmping point < 5 mohms, lnk (when new) cc. to DIN IEC > 2 mohms, tin-plted (when new) Resistnce chnge during the < 1 mohms (sed on new) service life cc. to DIN IEC Dielectric strength cc. to DIN IEC > 2000 V ~ Current crrying cp. cc. to > 2.5 A t T u 20 C DIN IEC > 1.6 A t T u 65 C Insultion resistnce under l. conditions > ohms (when new) cc. to DIN IEC Coupling cpcit. cc. to DIN IEC < 3 pf Surge voltge cc. to VDE 0433 > 1.5 kv (surge dischrge 1.2/5 µs) Module ody Polycronte Utiliztion ctegory cc. to DIN IEC 68 25/100/21 Cold -25 C Prt 1 Dry het +100 C Dmp het, stedy stte 21 dys 13

14 Protection Mgzines Series 71 Communictions equipment nd systems for dt trnsmission cn e dmged or even destroyed y overvoltges nd the resulting current surges or y overcurrent. Protection mgzines offer optimum primry protection in such cses. The surge rresters limit overvoltges quickly nd sfely to uncriticl levels nd relily dischrge the resulting dngerous currents. Optionl PTC in 2-Point Protection Plug to e instlled from the front side limits overcurrent y incresing its resistnce nd therefore locking the current. 14

15 Protection Mgzines Series 71 Bsic product chrcteristics nd order numers Pirs Protection Clss (*) Nominl Voltge [V] Nominl Disch. Current [ka] Nominl Current PTC [ma] Order numer (**) Point 3-Point 3-Point 3-Point S30264-D1004-S S30264-D1004-S S30264-D1004-S S30264-D1004-S502 (*) 2-Point-Protection = overcurrent protection 3-Point-Protection = overvoltge protection (**) Minimum order quntity 10 pieces or multiple of 10 pieces for 3-Point-Protection-Mgzines Minimum order quntity 25 pieces or multiple of 25 pieces for 1-Point-Protection-Plugs 15

16 Test nd Connecting Cords A complete rnge of cords is ville for the Series 5000 Distriution System. Cords cn e used for short-term jumpering (connecting cords) or for testing nd mesurement purposes (test cords). 16

17 Test nd Connecting Cords Connecting Cords, 2- nd 4-Pin, one Plug on ech Side Type Length Plug Connection Order Numer Connecting cord Connecting cord Connecting cord Connecting cord Connecting cord 3.0 m 5.0 m 3.0 m 4.0 m 6.0 m C39195-A346-A4 C39195-A346-A5 C39195-A348-A1 C39195-A348-A16 C39195-A348-A25 Test Cord with one Plug Type Length Plug Connection Order Numer Test cord Test cord Other cords on request 3.0 m 10.0 m without plug C39195-A346-A10 C39195-A346-A11 17

18 Test nd Connecting Cords Test Cord with Bnn Jck Type Length Plug Connection Order Numer Blck receptcle Test cord 0.25 m C39195-A356-A3 White receptcle Blck receptcle Test cord 0.25 m White receptcle C39195-A356-A30 Test Cord with Bnn Plug Type Length Plug Connection Order Numer Red plug Test cord 1.50 m C39195-A356-A2 Blue plug Test cord 1.50 m Blck plug C39195-A356-A21 White plug Test cord 4.00 m Blck plug C39195-A356-A40 White plug 18 Other cords on request

19 Disconnection nd Dummy Plugs, Mrking Cps Disconnection nd Dummy Plugs Disconnection plugs re used in disconnection elements for disconnecting indoor nd outdoor lines; dummy plugs re used to prevent connections from eing disconnected indvertently. Designtion For n Color Order Numer pirs Disconn. plug 1 Brown C39334-A111-A20 Disconn. plug 4 Brown C39334-A111-A540 Disconn. plug 5 Brown C39334-A111-A550 Dummy plug 1 Red C39334-A111-A120 (1 pck = 50 pcs per unit ordered) Mrking Cps Mrking Cps re used for the identifiction of lines on the front side of the functionl elements. The cps re ttched on the IDC contcts of ech wire pir. Color Order Numer Lilc C39104-A44-C100 Blck C39104-A44-C300 White C39104-A44-C400 Gry C39104-A44-C500 Red C39104-A44-C600 Green C39104-A44-C700 Blue C39104-A44-C800 Yellow C39104-A44-C900 (1 pck = 100 pcs per unit ordered) 19

20 Tools Termintion Tool For connecting the wires Cutting device with lock for optionl cutting of excess wire length Extrction hook for removing wires Designtion Termintion tool Order Numer C39407-A139-A12 Extrction Tool for Functionl Elements For removing the functionl elements. Designtion Extrction tool, 4-pir shielded Extrction tool, 5-pir Extrction tool, 4-pir Order Numer C39407-A139-A4 C39407-A139-A5 C39407-A139-A6 Extrction Tool for Protection Mgzine For removing the protection mgzines from the functionl elements. Designtion Extrction tool for protection mgzine Order Numer C39407-A149-A3 Tool for jumper support This tool supports the instlltion of jumpers in cse of limited spce etween ys or if jumpers need to e hnded over to the other side of free-stnding (i.e. doule sided) MDF frmes. Designtion Tool for jumper support Order Numer C39407-A149-A21 20

21 Additionl Leling Sets Additionl leling sets re ville for the purpose of identifying distriution components. Customized vrints cn lso e produced on request. The extr leling sets consist of the following components: A Lel Holder B Cover A C Leling components A, B nd C do lwys come with distriution lock on first shipment. B Leling Sets for Verticlly Mounted Distriution Components B C A Reihe Leiste Kel-Nr. DA-Nr Order Numer: C39104-A45-D1 10 x (1...10) Leling set for: C39104-A45-A1, -A45-A2, Order Numer: C39104-A45-D7 1 x ( ) Leling set for: S30264-D1001-S35, -D1001-S70 Leling Sets for Horizontlly Mounted Distriution Components C A x B x Order Numer: C39104-A61-D1 12 x (1...8) Leling set for: C39104-A61-A1 Order Numer: C39104-A65-D1 20 x (1...8) Leling set for: C39104-A65-A1 Order Numer: C39104-A66-D1 20 x (1...8) Leling set for: C39104-A66-A1 Order Numer: C39104-A51-D10 64 x ( ) Leling set for: C39104-A51-A4 Order Numer: C39104-A51-D11 64 x ( ) Leling set for: S30264-D1001-S44 21

22 Contcts Customer Service Center EMEA Customer Service Phone: or Fx: E-Mil: APAC Customer Service Phone: Fx: E-Mil: NAFTA Customer Service Phone: Fx: E-Mil: 22

23 Notes 23

24 COPYRIGHT 2007 GmH & Co. KG Profilstr Hgen Germny This puliction is the exclusive property of Corning Cle Systems GmH & Co. KG. This puliction must not e reproduced or copied in ny wy whtever without the express consent in writing of CCS. CCS reserves the right to improve, enhnce, nd modify the fetures nd specifictions of CCS products without prior notifiction. The informtion contined within this puliction hs een reproduced in good fith nd is ccurte, to the est of CCS knowledge, t the time of printing. However, CCS mkes no wrrnty s to, nd will not e lile on ny sis for, the informtion contined within this puliction.