GE Consumer & Industrial Power Protection UPS. Uninterruptible Power Supplies. GE imagination at work

Transcription

1 GE Consumer & Industrial Power Protection UPS Uninterruptible Power Supplies GE imagination at work

2 For more than a century, GE has led the way with innovative technologies and groundbreaking quality initiatives literally helping to power the world. long the way, through the development and delivery of stateoftheart products and uncompromising service, GE has also built a legacy as a leading supplier of critical power solutions. To bridge the gap between the traditional utility grid and the needs of today s business, GE offers a complete portfolio of critical power products and services, from desktop Uninterruptible Power Supply (UPS) units to engineered power systems, and from basic UPS and battery maintenance to comprehensive service contracts covering every aspect of your power quality and delivery system. t GE, our goal is simple to never let power quality stand in the way of our customers success. That s why GE is committed to continue developing and delivering UPS technology for the digital world

3 Uninterruptible Power Supplies.2 UPS topologies.3 RP Redundant Parallel rchitecture.6 IEM Intelligent Energy Management.8 Service for missioncritical power. Overview UPS families Introduction Order codes Numerical Index.1

4 UPS topologies a brief overview Passive Standby The passive standby system channels the incoming mains power, via a filter, directly to the load. s soon as the incoming power is outside tolerance, the UPS switches to battery operation. mains filter switch to critical load GE s solution: none Introduction LineInteractive battery The lineinteractive system channels the incoming mains power, via an VR utomatic Voltage Regulator, directly to the load. Compared to offline, the system can handle much larger voltage variations before switching to battery operation. mains filter VR switch to critical load GE s solutions: ML Series, Match battery Double Conversion Input and output are completely separated: the output converter (DC to C, or = to ~) continuously supplies the critical load with a completely new, regulated and clean sine wave output. No switching takes place when the incoming mains power gets outside tolerances. bypass switch automatically transfers the load to the mains when the output converter is unable to supply the load (e.g. due to overload or overtemperature). mains static switch battery to critical load GE s solutions: NetPro, LP Series, SitePro, SG Series.2

5 RP Redundant Parallel rchitecture The principle UPS 1 GE provides a unique technology called Redundant Parallel rchitecture (RP) that can parallel Uninterruptible Power Supply (UPS) modules with true redundancy. mains UPS 2 load With RP, there is no need for external electronics or switches to control the UPS modules in the parallel system. One of the UPS modules in the system arbitrarily takes a leadership role, while the other UPS modules have access to all control parameters. If one UPS fails to operate, the load is automatically redistributed among the others. If the lead UPS fails to operate then a different UPS automatically takes on the leadership role. RP unique concept Many other socalled redundant UPS offerings have one critical shortfall, in that they have critical components that are not redundant. RP technology provides complete redundancy of all critical components and there are no single points of failure. RP technology allows UPS system expansion not only to increase capacity but also to improve the reliability of the power provided to critical loads. For mission critical applications, RP technology provides true redundancy for the highest reliability. The RP systems are designed to have no single points of failure, ensuring the highest level of power protection for critical loads. Characteristics RP Configuration provides complete redundancy of all critical components and allows paralleling of up to four units for increased load capacity. It ensures excellent dynamic behaviour based on output voltage load sharing. This provides the highest reliability and availability for missioncritical applications. Modular design allows for system upgrades to meet future power needs without any interruption to the critical load or transfer to bypass. Easy to install and maintain. Scaleable design allows for efficient use of capital. PeertoPeer architecture where any UPS can be the logic leader ensuring no single points of failure..3

6 RP a comparative overview Multiple UPS are configured in a system to support an increase in load capacity and/or to improve reliability. There are several configurations that include multiple UPS. These configurations all share a common shortfall: they all have critical components that are not redundant. Parallel system with automatic transfer switch utility Introduction The parallel system with an utomatic Transfer Switch (TS) consists of one or more UPS modules with outputs connected by a switch that senses a loss in voltage and transfers the load to a different module or modules. Characteristics If one of the UPS modules fails, another unit is available to provide power to the load. No load sharing. UPS #1 dditional cost of the TS. communication link TS The TS is a single point of failure: if it fails, the load will be interrupted even if utility power is available. UPS #2 critical load Parallel system with paralleling cabinet utility The parallel cabinet configuration uses an external set of centralised electronics to distribute the load between the system s UPS modules. UPS #1 communication link UPS #2 paralleling cabinet critical load Characteristics If one of the UPS modules fails, another unit is available to provide power to the load. Motoroperated breakers replace the function of the TS. While less expensive than an TS, they operate much more slowly. Failure or malfunction of the shared control electronics will result in a load interruption, which is possible even if the power is present. The shared electronics package is a single point of failure. Nonredundant communications links. System price is increased because of the additional cost of the shared control electronics and motoroperated breakers..4

7 RP a comparative overview utility Hot standby secondary UPS output bypass line bypass line primary UPS critical load The cascade system or isolated redundant system uses the bypass static switch of the primary UPS to tie the output of a secondary (standby) UPS to the load. Characteristics Inexpensive, since no additional components are added to the system. There are many single points of failure. No sharing of the load. If the primary unit fails, the secondary unit must be able to accept a 0% load increase in milliseconds. Overload capacity is limited to the rating of the static switch of the primary module. System MTF is typically lower than the MTF of a single module. Mean Time etween Failures. RP utility nonredundant data bus Parallel system with centralized logic lead UPS #1 Characteristics UPS #2 centralised control logic UPS #3 UPS #4 UPS #5 UPS #6 critical load The parallel system with centralized logic is basically designed the same as the paralleling cabinet configuration. The difference is that they utilize the control electronics of one lead UPS module to control the distribution of the load between the system s other modules. No TS required. If the lead UPS module fails, the remaining units are uncontrolled. The system may go to bypass on all units, or may stop operation completely. If the communication link between the lead and other units fails, the load may be interrupted even without a utility power failure. s stated before, these configurations all share a common shortfall: they all have critical components that are not redundant. GE s RP technology provides complete redundancy of all critical components and there are no single points of failure. RP technology allows UPS system expansion not only to increase capacity but also to improve the reliability of the power provided to critical loads. For mission critical applications, RP technology provides true redundancy for the highest reliability..5

8 IEM Intelligent Energy Management Introduction 15% 37% % purchasing direct operating cost indirect operating cost maintenance 38% Typical life cycle cost of a large UPS GE offers the awardwinning Intelligent Energy Management (IEM ) capability to optimise energy costs while maintaining the highest possible reliability for parallel redundant UPS systems. The life cycle cost of a UPS system is built up from different components. In general, approximately half of the total cost is operating cost as a result of energy losses both direct heat losses in the UPS and indirect energy losses of the air conditioning system. UPS systems are engineered into applications taking into account the maximum load that needs to be supplied by the system. In practice the UPS will only supply a part of that load for most of the time. Many applications are shut down outside business hours. In addition very often a safety margin is included (overdimensioning) for future expansion. s a result the system is not used at its nominal rating most of the time during operation. This reduces the efficiency of the system and increases the energy costs. For parallel UPS installations, secured with RP, IEM saves energy by dynamically utilising the UPS modules as required to supply the load without compromising on the power reliability. load 80% The setup of IEM is flexible, giving the end user the freedom of choice to select redundancy degrees in different time periods. IEM also rotates amongst the units that are switched off to get operating hours equally distributed over all units. 20% 20% Use of IEM resulted in incremental energy savings of up to $33,000 annually for a system of four 0kV units secured by RP operating at full load for 50 hours per week and partial load (%) for the remaining time. 00:00 07:00 18:00 00:00 time In a typical application the actual load supplied is generally smaller than the nominal rating of the system enefits Reduced energy consumption Maintaining of power quality and reliability to the critical load Mains power quality monitoring Userdefinable protection levels Scheduled activation utomatic switch on of additional units in critical situations, increasing reliability Equal operating hours for each UPS in a parallel system.6

9 IEM compared to legacy parallel system UPS 1 0 kv UPS 2 0 kv 75% 75% load 300 kv load load = 0% 07:00 18:00 time Legacy Parallel System FullLoad Condition In full load condition the efficiency of a UPS is optimal. However, this condition only occurs typically hours / day. UPS 3 0 kv 75% efficiency 4 UPS UPS 4 0 kv 75% load % UPS 1 0 kv UPS 2 0 kv UPS 3 0 kv UPS 4 0 kv 15% 15% 15% 15% load 60 kv load 18:00 07:00 efficiency 4 UPS load = 20% load % time Legacy Parallel System PartialLoad Condition In partial load condition (most of the time) the efficiency of the UPS is lower causing higher energy costs. IEM UPS 1 0 kv UPS 2 0 kv UPS 3 0 kv 30% load 60 kv load 18:00 07:00 efficiency 2 UPS load = 20% time IEM Intelligent Energy Management Partial Critical Load Condition (UPS Redundancy) With IEM installed 2 units will be switched off automatically. In this way the efficiency is improved, still maintaining a n+1 redundant system. UPS 4 0 kv 30% load % UPS 1 0 kv UPS 2 0 kv UPS 3 0 kv UPS 4 0 kv 60% load 60 kv load 18:00 07:00 efficiency 1 UPS load = 20% load % time IEM Intelligent Energy Management Partial noncritical Load Condition (Utility Redundancy) With IEM installed 3 units can be switched off. In this way the efficiency is improved even more. The bypass is still available and will supply the load in case of a failure..7

10 Service for missioncritical power Service coverage GE has local offices in a number of countries around the globe and also a network of selected business partners, whose salespeople and service engineers combine expertise in our solutions with an indepth knowledge of local market conditions. GE s business partners, located in more than 80 countries around the world, use all that expertise and knowledge to adapt GE s products and services precisely to their customers needs. Service Whether you are a large corporation with multiple sites or a small business owner with a single location, GE will enable you to have a constant supply of clean and reliable power to keep your business up and running. We are at home in all industries, specialized in solutions and services for your electrical infrastructure, including: Critical power systems UPS systems stationary battery systems static transfer switches (STS) Low voltage equipment maintenance & service contracts extended warranty remote monitoring & diagnostics Industrial controls variable speed drives soft starters PLC Service portfolio GE offers a comprehensive portfolio of power quality services including: On site & emergency services 247 emergency hotline installation, commissioning, startup and upgrades repair, upgrade, retrofits assessment, inspection, testing online assistance Contractual services maintenance & service contracts extended warranty remote monitoring & diagnostics guaranteed intervention times preventive, planned maintenance resident technical services upgrade management Parts and repairs spare parts supply repair services replacement / return web based parts supply equipment rental Training training for operators training for maintenance staff product training web based training 247.8

11 Notes.9

12 UPS families overview UPS overview Lineinteractive Online double conversion Pluggable Hardwired 11 phase 31 phase kv 0.53 kv 0.64 kv 3 kv 5 kv 820 kv 30 kv ML Series Match and Match 19 inch NetPro and NetPro 19 inch LP 11 LP 31T LP 31 LP phase kv 500 kv LP SitePro Series kv SG Series.

13 Uninterruptible Power Supplies Introduction Order codes ML Series Match and Match 19 inch NetPro and NetPro 19 inch LP Series SitePro Series SG Series STS Static Transfer Switch Connectivity solutions Numerical Index.1

14 ML Series lineinteractive UPS pplications The lineinteractive Digital Energy ML Series UPS is used in a wide range of IT, networking and telecommunications applications. It will protect servers, hubs, switches and routers, and may also be installed to protect PCs, workstations, cash registers, fax machines, modems and ISDN adaptors. Order codes Function Providing exceptional costcritical protection for electrical equipment Standards / Marking Safety: EN ; EN 60950; EMC: EN Characteristics The lineinteractive ML Series UPS normally supplies the load through a bypass circuit. Filtering capabilities guard against surges, spikes and high frequency interferences. The utility also keeps the battery fully charged. The input voltage window is extremely wide: as long as the input voltage is within Vac (ML V) or between Vac (ML 00 V) the utomatic Voltage Regulation (VR) guarantees an output voltage that is between Vac and acceptable for every modern ICT device. In case of a mains failure the UPS switches to battery operation with a transfer time of 4 milliseconds, sufficiently short for computers which therefore will continue to operate without interruption. Technical specifications (general) Input voltage range V models Vac Input voltage range 00 V model Vac Input frequency 50Hz ± % Output voltage Vac +5% / % (battery operation) Output frequency 50Hz mbient operating temperature to 40 C Relative humidity 95% noncondensing udible noise < 35 d() Communication interface RS232 Protection degree IP20 Runtime table (minutes) ML Series model at typical UPS load (75%) Watts (1) (1) Max. power factor 0.6 (0.7 at 90% load).2

15 TM UPS ML Series lineinteractive UPS ML Series Rating (V / W) Runtime (minutes) at 0% load Dimensions (hxwxd, mm) Net weight (kg) attery (V/h) No. of outlets IEC 320 Ref. No. 350/2 500/ /420 00/ x1x x1x x1x x1x /5 12/7 24/5 24/ Option Manual service bypass 53x130x ML lineinteractive.3

16 Match Series lineinteractive UPS pplications The lineinteractive Digital Energy Match Series UPS is used in a wide range of IT, networking and telecommunications applications. It will protect servers, hubs, switches and routers, and may also be installed to protect PCs, workstations, cash registers, fax machines, modems and ISDN adaptors. Order codes Function Providing exceptional costcritical protection for electrical equipment Standards / Marking Safety: EN ; EN 60950; IEC EMC: EN Characteristics The lineinteractive Match Series UPS normally supplies the load through a bypass circuit. Filtering capabilities guard against surges, spikes and high frequency interferences. The utility also keeps the battery fully charged. The input voltage window is extremely wide: as long as the input voltage is within Vac (Match V) or even between Vac (Match V) the utomatic Voltage Regulation (VR) guarantees an output voltage that is between Vac and acceptable for every modern ICT device. In case of a mains failure the UPS switches to battery operation with a transfer time of 4 milliseconds, sufficiently short for computers which therefore will continue to operate without interruption. Technical specifications (general) Input voltage range V models, 70% load Vac Input voltage range V models, 70% load Vac Input frequency 50 or 60 Hz ± 5% Output voltage Vac ± 2% (battery operation) Output frequency 50 or 60 Hz, autosensing mbient operating temperature to 40 C Relative humidity 95% noncondensing udible noise 3545 d() Communication interface RS232; Plug and Play; open collector alarm contacts (model dependent) Protection degree IP20 Runtime table (minutes) Match Series model L 00 00L at typical UPS load (75%) Watts (1) (1) Max. power factor Match : 0.6; Match 2200/3000: 0.7.4

17 Match Series lineinteractive UPS Match V Rating (V / W) Runtime (minutes) at 0% load Dimensions (hxwxd, mm) Net weight (kg) attery (V/h) No. of outlets IEC 320 Ref. No. Match L builtin longer runtime V 500/ /420 00/ / /1540 battery pack 3000/20 battery pack 700/420 00/ x155x x155x x180x x180x x187x x187x x187x x187x485 UPS enclosure without batteries, order separate battery pack more battery packs can be connected for longer runtimes 225x180x x180x /7 24/7 36/7 36/12 36/14 48/14 36/12 36/ Match lineinteractive Match 19 inch V: 6HU 700/420 00/ / / / HUx19 x440mm 3HUx19 x440mm 3HUx19 x440mm 6HUx19 x440mm 6HUx19 x440mm /7 24/7 36/7 36/12 48/ attery pack for Match 19 inch for 2200 V for 3000 V HUx19 x440mm 3HUx19 x440mm /14 48/ to increase runtime Options Manual service bypass Manual service bypass box, hxwxd = 53x130x204mm DC cable (1.5m) for 3rd party external battery Match 2200 DC cable (1.5m) for 3rd party external battery Match

18 NetPro Series double conversion UPS pplications The online NetPro UPS is designed for missioncritical applications. It is used in a wide range of IT networking and telecommunications applications: missioncritical servers, telecommunication equipment and local area networks. Characteristics Order codes Standards / Marking Safety: EN ; EN 60950; IEC EMC: EN ; EN EN ; IEC Technical specifications (general) The NetPro UPS is a true VFI (Voltage & Frequency Independent) online double conversion UPS. This technology allows the NetPro to eliminate any power reliability problem. The incoming C mains power is continuously converted by the input converter to DC, which is used to charge the batteries and to supply the output converter. This output converter synthesizes a completely new C sine wave output for the connected load. ny mains disturbance is blocked at the input. The V models are equipped with a LCD information panel with status and alarm settings. The V models have a programmable outlet that can be switched off for less critical loads, thus maximizing uptime of critical devices. Function Providing exceptionally reliable protection for electrical equipment Input voltage range V models, 70% load Vac Input voltage range V models, 70% load Vac Input frequency 50 or 60 Hz ± 5% Output voltage V models Vac ± 2% Output voltage V models 220//240 Vac ± 1% Output frequency 50 or 60 Hz, front selectable mbient operating temperature to 40 C Relative humidity 95% noncondensing udible noise 3545 d() Communication interface US; RS232; Plug and Play; open collector alarm contacts Protection degree IP20 Runtime table (minutes) NetPro Series model at typical UPS load (75%) Watts

19 9 mm 6 mm UPS NetPro Series double conversion UPS NetPro Series V NetPro ISO V galvanic isolation Rating (V / W) 600/360 00/ / / /1800 0/2 2000/ /1800 Runtime (minutes) at 0% load Dimensions (hxwxd, mm) 225x185x x185x x185x x220x x220x x220x x220x x220x557 Net weight (kg) attery (V/h) 24/7 36/7 48/7 72/7 8/7 120/7 72/7 8/7 No. of outlets IEC (1) 2+1 (1) (1) (1) programme output DC connector (batt. ext.) no no no Ref. No NetPro double conversion attery packs for NetPro (ISO) for NP 00 for NP x185x x185x /14 no batt for NP 2000 for NP 2000 for NP 2000 for NP x220x x220x x220x x220x /7 72/14 72/21 no batt to increase runtime for NP 3000 for NP 3000 for NP x220x x220x x220x /7 8/14 no batt NetPro 19 inch V: 3HU 600/360 00/ / / / HUx19 x440mm 3HUx19 x440mm 3HUx19 x440mm 3HUx19 x440mm 6HUx19 x440mm /7 36/7 48/7 72/7 8/ no no attery pack for NetPro 19 inch for NP 00 for NP HUx19 x440mm 3HUx19 x440mm /14 36/ for NP HUx19 x440mm / for NP HUx19 x440mm / to increase runtime Options Manual service bypass Manual service bypass box, hxwxd = 53x130x204mm DC cable (1.5m) for 3rd party external battery NetPro 00 DC cable (1.5m) for 3rd party external battery NetPro 2000 DC cable (1.5m) for 3rd party external battery NetPro

20 LP 11 Series double conversion UPS pplications The online LP UPS Series is designed for a range of missioncritical applications. The LP UPS is easy to install and service, optimised for the office environment. The robust design allows for more traditional industrial applications. Order codes Standards / Marking Safety: EN ; EN 60950; IEC EMC: EN ; IEC Surge capability: IEC (6kV 1.2/50μs, 3k 8/20μs) Characteristics The LP 11 UPS is a 1phase in / 1phase out, true VFI (Voltage & Frequency Independent) online double conversion, intelligent and heavy duty UPS. The VFI design concept enables the highest level of protection even under the toughest conditions. The system power and reliability can be easily expanded by adding units, creating a redundant system with no single points of failure, utilizing GE s unique Redundant Parallel rchitecture (RP ) technology. Function Providing exceptionally reliable protection for electrical equipment Technical specifications (general) Input voltage range Vac Input frequency range 4070 Hz Output voltage 220//240 Vac ± 1% (user selectable) Output frequency 50 or 60 Hz, front selectable Environment IP 20 (IEC 60529) mbient operating temperature to 40 C Relative humidity 95% noncondensing udible noise 4055 d(), load and temperature dependent Interfacing std: RS232; optional: potential free contacts, SNMP Standard features ECO mode, SM Superior attery Management, boost charging RP optional attery extension optional for 5 kv models, not available for 3 kv ackfeed protection optional for 36 kv models, not available for 8 kv Software compatibility JUMP DataShield, JUMP Manager, IRIS Runtime table (minutes) LP 11 UPS model at typical UPS load (75%) V/Watts 00 / / / / / / /

21 LP 11 Series double conversion UPS LP 11 with batteries Rating (kv) attery (V/h) Runtime (minutes) at 0% load Dimensions (hxwxd, mm) Net weight (kg) DC connector (batt. ext.) Ref. No. LP 11 parallel with batteries LP 11 without batteries /7 240/7 240/7 240/12 240/12 144/7 240/7 240/7 240/12 240/ x313x x313x x313x x313x x313x x313x no (1) no (1) no (1) LP 11 double conversion LP 11 parallel without batteries x313x x313x no (1) attery cabinets with batteries for LP 511 for LP /7 240/ no for LP 611 for LP /7 240/ no for LP 811 for LP /7 240/ no for LP 11 for LP /7 240/ no attery cabinets without batteries for LP 5/6/8/11 20 Options for LP 11 RP Redundant Parallel rchitecture kit (1 per unit) ackfeed relay for LP 3/5/611 Connector and cable for 3rd party external battery (1) For longer runtimes choose LP 511 For ordering please contact customer service..9

22 LP 31T Series double conversion UPS pplications Order codes Standards / Marking Safety: EN ; EN 60950; IEC EMC: EN ; IEC Surge capability: IEC (6kV 1.2/50μs, 3k 8/20μs) The online LP UPS Series is designed for a range of missioncritical applications. The LP UPS is easy to install and service, optimised for the office environment. The robust design allows for more traditional industrial applications. Characteristics The LP 31T UPS is a 3phase in / 1phase out, true VFI (Voltage & Frequency Independent) online double conversion, intelligent and heavy duty UPS. The VFI design concept enables the highest level of protection even under the toughest conditions. The system power and reliability can be easily expanded by adding units, creating a redundant system with no single points of failure, utilizing GE s unique Redundant Parallel rchitecture (RP ) technology. The LP 31T is a LP 11 UPS equipped with a 31 phase conversion input transformer, galvanically separating the UPS from the incoming 3phase mains. Function Technical specifications (general) Providing exceptionally reliable protection for electrical equipment Input voltage range Vac Input frequency range 4070 Hz Output voltage 220//240 Vac ± 1% (user selectable) Output frequency 50 or 60 Hz, front selectable Environment IP 20 (IEC 60529) mbient operating temperature to 40 C Relative humidity 95% noncondensing udible noise 4055 d(), load and temperature dependent Interfacing std: RS232; optional: potential free contacts, SNMP Standard features ECO mode, SM Superior attery Management, boost charging RP optional attery extension optional ackfeed protection standard available Software compatibility JUMP DataShield, JUMP Manager, IRIS Runtime table (minutes) LP 31T UPS model 531T 631T 831T 31T at typical UPS load (75%) V/Watts 00 / / / / / / /

23 LP 31T Series double conversion UPS LP 31T with batteries LP 31T parallel with batteries LP 31T without batteries Rating (kv) attery (V/h) 240/7 240/7 240/12 240/12 240/7 240/7 240/12 240/12 Runtime (minutes) at 0% load Dimensions (hxwxd, mm) 855x313x x313x x313x x313x x313x x313x x313x x313x x313x x313x x313x x313x720 Net weight (kg) DC connector (batt. ext.) Ref. No. LP 31T double conversion LP 31T parallel without batteries x313x x313x x313x x313x attery cabinets with batteries for LP 531T for LP 531T 240/7 240/ no for LP 631T for LP 631T 240/7 240/ no for LP 831T for LP 831T 240/7 240/ no for LP 31T for LP 31T 240/7 240/ no attery cabinets without batteries for 5 kv 20 Options for LP 31T RP Redundant Parallel rchitecture kit (1 per unit) Connector and cable for 3rd party external battery For ordering please contact customer service..11

24 LP 31 Series double conversion UPS pplications The online LP UPS Series is designed for a range of missioncritical applications. The LP UPS is easy to install and service, optimised for the office environment. The robust design allows for more traditional industrial applications. Order codes Function Providing exceptionally reliable protection for electrical equipment Standards / Marking Safety: EN ; EN 60950; IEC EMC: EN ; IEC Characteristics The LP 31 UPS is a 3phase in / 1phase out, true VFI (Voltage & Frequency Independent) online double conversion, intelligent and heavy duty UPS. The VFI design concept enables the highest level of protection even under the toughest conditions. The transformerless design provides a high efficiency. In the ECO Mode the efficiency can be even further increased. The batteries are easy to replace by acces via the front. Superior attery Management optimizes the lifespan of the batteries and keeps you from surprises. Technical specifications (general) Input voltage range Vac Input frequency range 4565 Hz Output voltage 220//240 Vac ± 1% (user selectable) Output frequency 50 or 60 Hz, front selectable Environment IP 20 (IEC 60529) mbient operating temperature to 40 C Relative humidity 95% noncondensing udible noise 4055 d(), load and temperature dependent Interfacing std: RS232; optional: potential free contacts, SNMP Standard features ECO mode, SM Superior attery Management attery extension optional ackfeed protection standard available Software compatibility JUMP DataShield, JUMP Manager, IRIS Runtime table (minutes) LP 31 UPS model 831 (1) 31 (1) 1531 (2) 2031 (2) at typical UPS load (75%) V/Watts 0 / / / / / / (1) 7h battery (2) 14h battery.12

25 LP 31 Series double conversion UPS LP 831 attery capacity (V/h) Runtime (minutes) at 0% load Dimensions (hxwxd, mm) Net weight (kg) Ref. No. LP 31 LP 1531 LP 831 UPS 8 kv without battery LP 831 UPS with 7h battery in UPS cabinet LP 831 UPS with 14h battery in UPS cabinet LP 31 UPS kv without battery LP 31 UPS with 7h battery in UPS cabinet LP 31 UPS with 14h battery in UPS cabinet LP 1531 UPS 15 kv without battery LP 1531 UPS with 14h battery in UPS cabinet 240/7 240/12 240/7 240/14 240/ x4x x4x x4x x4x x4x x4x x4x x4x LP 31 double conversion LP 2031 LP 2031 UPS 20 kv without battery LP 2031 UPS with 14h battery in UPS cabinet 240/ x4x x4x Options battery cabinets and charger attery cabinet without batteries attery cabinet with batteries 2x240V/14h attery charger 4.2, necessary for battery capacity over 14h on LP 831 and LP 31 with capacity > 14h 925x4x x4x Options special Wooden crate (per cabinet) mandatory for sea and air freights Runtime selection table Runtimes (minutes) at full load, power factor battery cabinet 2 battery cabinets 7 h battery in UPS 14 h battery in UPS 7 h battery in UPS 14 h battery in UPS LP LP LP LP For ordering please contact customer service..13

26 LP Series double conversion UPS pplications The online LP UPS Series is designed for a range of missioncritical applications. The LP UPS is easy to install and service, optimised for the office environment. The robust design allows for more traditional industrial applications. Order codes Function Providing exceptionally reliable protection for electrical equipment Standards / Marking Safety: EN 50091; IEC Protection: IEC60529 EMC: EN (Class ) Characteristics The LP 33 UPS is a 3phase in / 3phase out, true VFI (Voltage & Frequency Independent) online double conversion, intelligent and heavy duty UPS. The VFI design concept enables the highest level of protection even under the toughest conditions. The system power and reliability can be easily expanded by adding units, creating a redundant system with no single points of failure, utilizing GE s unique Redundant Parallel rchitecture (RP ) technology. Technical specifications (general) Input voltage range Vac Input frequency range 4565 Hz Output voltage 380//415 Vac ± 1% (user selectable) Output frequency 50 or 60 Hz, front selectable Environment IP 20 (IEC 60529) mbient operating temperature 0 to 40 C Relative humidity 95% noncondensing udible noise 4055 d(), load and temperature dependent Interfacing std: RS232; potential free contacts, SNMP Standard features SM Superior attery Management attery extension optional ackfeed protection standard available Software compatibility JUMP DataShield, JUMP Manager, IRIS Runtime table (minutes) (1) LP 33 UPS model at typical UPS load (75%) V/Watts 3000 / / / / / / / 20 (1) with battery: 7h 14h 21h.14

27 LP Series double conversion UPS LP 33 LP 2033 LP 3033 LP 33 UPS kv with 7 h battery, single input LP 33 UPS kv with 14 h battery, single input LP 33 UPS kv with 7 h battery, single input + RP LP 33 UPS kv with 14 h battery, single input + RP LP 33 UPS kv with 7 h battery, dual input LP 33 UPS kv with 14 h battery, dual input LP 33 UPS kv with 7 h battery, dual input + RP LP 33 UPS kv with 14 h battery, dual input + RP LP 33 UPS kv without battery, single input LP 33 UPS kv without battery, single input + RP LP 33 UPS kv without battery, dual input LP 33 UPS kv without battery, dual input, + RP LP 2033 UPS 20 kv with 14 h battery, single input LP 2033 UPS 20 kv with 14 h battery, single input + RP LP 2033 UPS 20 kv with 14 h battery, dual input LP 2033 UPS 20 kv with 14 h battery, dual input + RP LP 2033 UPS 20 kv without battery, single input LP 2033 UPS 20 kv without battery, single input + RP LP 2033 UPS 20 kv without battery, dual input LP 2033 UPS 20 kv without battery, dual input, + RP LP 3033 UPS 30 kv with 21 h battery, single input LP 3033 UPS 30 kv with 21 h battery, single input + RP LP 3033 UPS 30 kv with 21 h battery, dual input LP 3033 UPS 30 kv with 21 h battery, dual input + RP LP 3033 UPS 30 kv without battery, single input LP 3033 UPS 30 kv without battery, single input + RP LP 3033 UPS 30 kv without battery, dual input LP 3033 UPS 30 kv without battery, dual input, + RP attery capacity (V/h) 240/7 240/14 240/7 240/14 240/7 240/14 240/7 240/14 240/14 240/14 240/14 240/14 240/21 240/21 240/21 240/21 Runtime (minutes) at 0% load Dimensions (hxwxd, mm) 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x500x780 13x660x780 13x660x780 13x660x780 13x660x780 13x660x780 13x660x780 13x660x780 13x660x780 Net weight (kg) Ref. No. LP double conversion Options battery cabinets and charger attery cabinet with 21 h batt, including cables (5m) and battery temperature sensor attery cabinet with 28 h batt, including cables (5m) and battery temperature sensor attery cabinet with 35 h batt, including cables (5m) and battery temperature sensor attery cabinet with 42 h batt, including cables (5m) and battery temperature sensor attery cabinet without batteries, including cables (5m) and battery temperature sensor Mounting set for 7 h battery in UPS cabinet (40 blocks) without battery Mounting set for 2x7 h battery in UPS cabinet (80 blocks) without battery Mounting set for 3x7 h battery in UPS cabinet (120 blocks) without battery Mounting set for each 7 h battery in battery cabinet (40 blocks) without battery, incl. fuses attery fuse box (with fuses) for LP 33 attery fuse box (with fuses) for LP 2033 attery fuse box (with fuses) for LP 3033 dditional battery charger 4.2 (can be installed in UPS) 50x760x780 50x760x780 50x760x780 50x760x780 50x760x Note: UPS and battery cabinets without batteries are also without battery mounting sets. To mount locally purchased batteries, order the mounting set. Options special Wooden crate (per cabinet) mandatory for sea and air freights, 20 kv Wooden crate (per cabinet) mandatory for sea and air freights, 30 kv Wooden crate (per cabinet) mandatory for sea and air freights, battery cabinets Runtime selection table Runtimes (minutes) at full load, power factor 0.8 attery cabinet with 21 h battery attery cabinet with 28 h battery attery cabinet with 35 h battery attery cabinet with 42 h battery LP LP LP For ordering please contact customer service..15

28 LP Series double conversion UPS pplications The GE Digital Energy LP 33 Series is a highly reliable and cost effective three phase UPS system providing critical power protection for a wide range of applications. Order codes Function Providing exceptionally reliable protection for electrical equipment Standards / Marking Safety: EN ; EN 60950; IEC Protection: IEC EMC: EN (Class ) The GE Digital Energy LP was developed using GE s Design for Six Sigma methodology to ensure that the product fully meets customer requirements and expectations. Characteristics The LP 33 UPS is a 3phase in / 3phase out, true VFI (Voltage & Frequency Independent) online double conversion, intelligent and heavy duty UPS. The VFI design concept enables the highest level of protection even under the toughest conditions. The LP UPS offers reliability at its best. The unit is equipped with a redundant power supply ensuring the load being transferred in an instant to the static bypass in the event of a breakdown of the power electronics. To further increase system reliability, 2 or more units can be connected in parallel. In this way a redundant fault tolerant system is created with maximum availability and reliability. The decentralized bypass offers maximum flexibility to the enduser for future expansion of the system. Technical specifications (general) Input voltage range Vac Input frequency range 5060 Hz ± % Output voltage 3x380//415 Vac (user selectable) Output frequency 50 or 60 Hz ± 0.1% (user selectable) Efficiency 93% (on ECO Mode 99%) Input power factor 0.98 Input current THDi at 200% load < % (< 5% optional) Environment IP 20 (IEC 60529) mbient operating temperature 0 to 40 C Relative humidity 95% noncondensing udible noise 40 kv: <60 d(), kv: <65 d(), load and temperature dependent Interfacing std: RS232; 4 alarm contacts, SNMP interface (optional) Software compatibility JUMP DataShield, JUMP Manager, IRIS Runtime table (0% load, minutes) LP 33 UPS model Capacity of battery set (V/h) 480/ / / /

29 LP Series double conversion UPS LP 4033 LP 6033 LP 8033 LP 033 LP attery cabinets with batteries Options mounted in factory LP 4033 UPS 40 kv without battery, THDi < % LP 4033 UPS 40 kv without battery, THDi < 5% LP 6033 UPS 60 kv without battery, THDi < % LP 6033 UPS 60 kv without battery, THDi < 5% LP 8033 UPS 80 kv without battery, THDi < % LP 8033 UPS 80 kv without battery, THDi < 5% LP 033 UPS 0 kv without battery, THDi < % LP 033 UPS 0 kv without battery, THDi < 5% LP UPS 120 kv without battery, THDi < % LP UPS 120 kv without battery, THDi < 5% (1) preliminary attery capacity (V/h) attery cabinet with 480 V / 22 h battery for LP 4033 with fuses attery cabinet with 480 V / 33 h battery for LP 4033 with fuses attery cabinet with 480 V / 33 h battery for LP 60/8033 without fuses attery cabinet with 480 V / 50 h battery for LP 60/8033 without fuses attery cabinet with 480 V / 2x33 h battery for LP 60/8033 without fuses attery cabinet with 480 V / 2x33 h battery for LP 0/12033 without fuses attery cabinets without batteries attery cabinet without battery for LP 4033 with fuses attery cabinet without battery for LP 60/8033 without fuses attery cabinet without battery for LP 60/8033 without fuses attery cabinet without battery for LP 0/12033 without fuses attery fuse box for LP 4033 with fuses attery fuse box for LP 60/8033 without fuses attery fuse box for LP 0/12033 without fuses attery fuse kit for LP 6033 attery fuse kit for LP 8033 attery fuse kit for LP 033 attery fuse kit for LP Options field installable Options special RP Redundant Parallel rchitecture Separate bypass input for LP 4033 Separate bypass input for LP 6033 Separate bypass input for LP 8033 Separate bypass input for LP 0/12033 RP Redundant Parallel rchitecture (field installed) Extended customer interface card (6 relay contacts) ottom Grid for cabinet 430x725 mm ottom Grid for cabinet 600x725 mm ottom Grid for cabinet 725x725 mm ottom Grid for cabinet 780x725 mm Seaworthy packing (also for air freights), LP 4033 Seaworthy packing (also for air freights), LP 60/80/0/12033 Runtime (min) at load 0% Dimensions (hxwxd, mm) 1x600x725 1x600x x600x x600x x600x x600x x725x x725x x725x x725x725 1x430x725 1x430x x430x x600x x600x x780x725 1x430x x430x x600x x780x x150x200 x200x x200x Net weight (kg) (1) (1) 450 (1) 450 (1) Ref. No. LP double conversion Runtime selection table Runtimes (minutes) at full load, power factor 0.8 attery cabinet with 22 h battery for LP 4033 attery cabinet with 33 h battery for LP 4033 attery cabinet with 33 h battery for LP 60/8033 attery cabinet with 50 h battery for LP 60/8033 attery cabinet with 2x33 h battery for LP 60/8033 attery cabinet with 2x33 h battery for LP 0/12033 LP LP LP LP 033 LP For ordering please contact customer service..17

30 SitePro Series double conversion UPS pplications The online SitePro UPS is an extremely reliable UPS providing critical power protection for a wide range of demanding missioncritical applications such as computer and data centers, medical facilities, broadcasting and satellite transmission systems, manufacturing and process control units, security systems, financial institutions, transportation infrastructure etc. etc. Order codes Function Providing exceptionally reliable protection for electrical equipment Standards / Marking Safety: EN 50091; EMC: EN ; EN Characteristics The SitePro family of 3phase in / 3phase out highperformance UPS systems operates in a double conversion mode (providing true online operation), thus providing the highest levels of power reliability. Each UPS is fully compliant with international standards regarding Voltage and Frequency Independent (VFI) operation. True VFI makes the GE SitePro an extremely reliable UPS for data security and other demanding critical applications, even under the toughest conditions. The SitePro UPS is available in models from kv up to 500 kv. For highpower redundant applications, the GE SitePro can be installed with up to eight units in parallel achieving power protection up to 4 MV. The systems are controlled in a true peertopeer configuration with redundancy in all critical elements and functions, utilizing GE s unique Redundant Parallel rchitecture (RP ) technology. This advanced technology provides the highest possible system reliability for mission critical applications with no single points of failure..18

31 Technical specifications Technical specifications (model dependent) Output power rating (kv) Output power factor Output power rating Dimensions Weight (without batteries) Noise level (DIN 45630) Dimensions (hxwxd, mm): = 1450x680x800 = 1450x750x800 C = 1800x10x800 D = 1800x1550x800 E = 1800x2600x800 (kw) kg d() Technical specifications (general) C C D D E E SitePro double conversion Input voltage range Vac Input frequency range 4566 Hz Output voltage 3x380//415 Vac + N ± 1% (user selectable) Output frequency 50 or 60 Hz (user selectable) Output distortion at linear load < 2% Output distortion at nonlinear load < 3% Crest factor > 3:1 Overload capability on inverter 125% min., 150% 1 min. (500 kv 30 sec.) Output voltage regulation static ± 1% Output voltage regulation dynamic ± 3% Overall efficiency at 0% load (double conversion mode) up to 94.5% Environment IP 20 (IEC 60529) mbient operating temperature 0 to 40 C Relative humidity 95% noncondensing Interfacing std: RS232; potential free contacts, programmable relays attery extension optional ackfeed protection standard available Software compatibility JUMP DataShield, JUMP Manager, IRIS Runtime table kv (1) (0% load, minutes) LP 33 UPS model kv 15 kv 20 kv 30 kv 40 kv 60 kv Capacity of battery set (V/h) 360 / / / / / / / (1) For the full SitePro range (500 kv) runtimes are possible from 5 minutes up to 4 hours. Contact your dealer for customised battery solutions not mentioned in this catalogue..19

32 SitePro Series double conversion UPS SitePro attery capacity (V/h) Runtime (min) at 0% load Dimensions (hxwxd, mm) Net weight (kg) Ref. No. Order codes SitePro kv without battery, with 6 pulse rectifier RP kit installed in factory h battery in UPS cabinet 17 h battery in UPS cabinet 24 h battery in UPS cabinet 33 h battery in UPS cabinet h battery mounted in separate cabinet 17 h battery mounted in separate cabinet 24 h battery mounted in separate cabinet 38 h battery mounted in separate cabinet 65 h battery mounted in separate cabinet 2x38 h battery mounted in separate cabinet attery fuses for cabinet attery fuse box (with fuses) attery contactor mounted in UPS cabinet Input isolation transformer mounted in UPS cabinet batt. cavity Input filter for 5th harmonic with power factor correction, mounted inside the batt. cavity for 50Hz Output cabinet 4x 360/ 360/17 360/24 360/33 360/ 360/17 360/24 360/38 360/65 360/ x680x x750x x10x x200x SitePro 15 SitePro 15 kv without battery, with 6 pulse rectifier RP kit installed in factory 17 h battery in UPS cabinet 24 h battery in UPS cabinet 33 h battery in UPS cabinet 17 h battery mounted in separate cabinet 24 h battery mounted in separate cabinet 38 h battery mounted in separate cabinet 65 h battery mounted in separate cabinet 2x38 h battery mounted in separate cabinet attery fuses for cabinet attery fuse box (with fuses) attery contactor mounted in UPS cabinet Input isolation transformer mounted in UPS cabinet batt. cavity Input filter for 5th harmonic with power factor correction, mounted inside the batt. cavity for 50Hz Output cabinet 4x 360/17 360/24 360/33 360/17 360/24 360/38 360/65 360/ x680x x750x x10x x200x SitePro 20 SitePro 20 kv without battery, with 6 pulse rectifier RP kit installed in factory 17 h battery in UPS cabinet 24 h battery in UPS cabinet 33 h battery in UPS cabinet 17 h battery mounted in separate cabinet 24 h battery mounted in separate cabinet 38 h battery mounted in separate cabinet 65 h battery mounted in separate cabinet 2x38 h battery mounted in separate cabinet attery fuses for cabinet attery fuse box (with fuses) attery contactor mounted in UPS cabinet Input isolation transformer mounted in UPS cabinet batt. cavity Input filter for 5th harmonic with power factor correction, mounted inside the batt. cavity for 50Hz Output cabinet 4x 360/17 360/24 360/33 360/17 360/24 360/38 360/65 360/ x680x x750x x10x x200x For ordering please contact customer service..20

33 SitePro Series double conversion UPS SitePro 30 SitePro 30 kv without battery, with 6 pulse rectifier RP kit installed in factory 24 h battery in UPS cabinet 33 h battery in UPS cabinet 24 h battery mounted in separate cabinet 38 h battery mounted in separate cabinet 65 h battery mounted in separate cabinet 2x38 h battery mounted in separate cabinet attery fuses for cabinet attery fuse box (with fuses) attery contactor mounted in UPS cabinet Input isolation transformer mounted in UPS cabinet batt. cavity Input filter for 5th harmonic with power factor correction, mounted inside the batt. cavity for 50Hz Output cabinet 4x attery capacity (V/h) 360/24 360/33 360/24 360/38 360/65 360/76 Runtime (min) at 0% load Dimensions (hxwxd, mm) 1450x680x x750x x10x x200x150 Net weight (kg) Ref. No. SitePro double conversion SitePro 40 SitePro 40kV without battery, with 6 pulse rectifier SitePro 40kV without battery, prepared for 12 pulse rectifier RP kit installed in factory 33 h battery in UPS cabinet 38 h battery mounted in separate cabinet 65 h battery mounted in separate cabinet 2x38 h battery mounted in separate cabinet attery fuses for cabinet attery fuse box (with fuses) attery contactor mounted in UPS cabinet Input isolation transformer mounted in UPS cabinet batt. cavity 12 pulse rectifier without galv. separation in separate cabinet 12 pulse rectifier with galv. separation in separate cabinet Input isolation transformer in separate cabinet Input filter for 5th harmonic with power factor correction, mounted inside the batt. cavity for 50Hz Output cabinet 4x 360/33 360/38 360/65 360/ x680x x680x x750x x10x x200x SitePro 60 SitePro 60kV without battery, with 6 pulse rectifier SitePro 60kV without battery, prepared for 12 pulse rectifier RP kit installed in factory 65 h battery mounted in separate cabinet 2x38 h battery mounted in separate cabinet attery fuses for cabinet attery fuse box (with fuses) Input isolation transformer in separate cabinet 12 pulse rectifier without galv. separation in separate cabinet 12 pulse rectifier with galv. separation in separate cabinet Input filter for 5th harmonic with power factor correction, mounted inside the batt. cavity for 50Hz Output cabinet 4x 360/65 360/ x750x x750x x750x x10x800 x300x x10x For ordering please contact customer service..21

34 SitePro Series double conversion UPS SitePro 150 Dimensions (hxwxd, mm) Net weight (kg) Ref. No. Order codes SitePro 150 kv without battery, with 6 pulse rectifier SitePro 150 kv without battery, prepared for 12 pulse rectifier with galv. separation SitePro 150 kv without battery, prepared for 12 pulse rectifier without galv. separation RP kit installed in factory Input isolation transformer in separate cabinet 12 pulse rectifier without galv. separation in separate cabinet 12 pulse rectifier with galv. separation in separate cabinet attery fuse box (with fuses) Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse rectifier Input filter for 5th harmonic with power factor correction, in separate cabinet, for 50Hz Input filter for 5th harmonic with power factor correction, in separate cabinet, for 60Hz Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz Cables for common mains (1) Output cabinet 2x Output cabinet 3x Output cabinet 4x 1800x10x x10x x10x xx x10x x10x x1550x SitePro 200 SitePro 200 kv without battery, with 6 pulse rectifier SitePro 200 kv without battery, prepared for 12 pulse rectifier with galv. separation SitePro 200 kv without battery, prepared for 12 pulse rectifier without galv. separation RP kit installed in factory Input isolation transformer in separate cabinet 12 pulse rectifier without galv. separation in separate cabinet 12 pulse rectifier with galv. separation in separate cabinet attery fuse box (with fuses) Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse rectifier Input filter for 5th harmonic with power factor correction, in separate cabinet, for 50Hz Input filter for 5th harmonic with power factor correction, in separate cabinet, for 60Hz Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz Cables for common mains (1) Output cabinet 2x Output cabinet 3x Output cabinet 4x 1800x10x x10x x10x xx x10x x10x x1550x SitePro 250 SitePro 250 kv without battery, with 6 pulse rectifier SitePro 250 kv without battery, prepared for 12 pulse rectifier with galv. separation SitePro 250 kv without battery, prepared for 12 pulse rectifier without galv. separation RP kit installed in factory 12 pulse rectifier without galv. separation in separate cabinet 12 pulse rectifier with galv. separation in separate cabinet attery fuse box (with fuses) Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse rectifier without galv. separation Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse rectifier with galv. separation Input filter for 5th harmonic with power factor correction, in separate cabinet, for 50Hz Input filter for 5th harmonic with power factor correction, in separate cabinet, for 60Hz Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz Cables for common mains (1) Output cabinet 2x Output cabinet 3x Output cabinet 4x 1800x1550x x1550x x1550x x10x xx x10x x1550x x1780x (1) In case of common mains and DCU or filter (input to UPS and bypass) order also the cables For ordering please contact customer service..22

35 SitePro Series double conversion UPS SitePro 300 SitePro 300 kv without battery, with 6 pulse rectifier SitePro 300 kv without battery, prepared for 12 pulse rectifier with galv. separation SitePro 300 kv without battery, prepared for 12 pulse rectifier without galv. separation RP kit installed in factory 12 pulse rectifier without galv. separation in separate cabinet 12 pulse rectifier with galv. separation in separate cabinet attery fuse box (with fuses) Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse rectifier without galv. separation Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse rectifier with galv. separation Input filter for 5th harmonic with power factor correction, in separate cabinet, for 50Hz Input filter for 5th harmonic with power factor correction, in separate cabinet, for 60Hz Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz Cables for common mains (1) Output cabinet 2x Output cabinet 3x Output cabinet 4x Dimensions (hxwxd, mm) 1800x1550x x1550x x1550x x10x xx x10x x1550x x1780x800 Net weight (kg) Ref. No. SitePro double conversion SitePro SitePro kv without battery, with 12 pulse rectifier without galv. separation SitePro kv without battery, prepared for 12 pulse rectifier with galv. separation RP kit installed in factory 12 pulse rectifier with galv. separation in separate cabinet Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse rectifier without galv. separation Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse rectifier with galv. separation Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz attery fuse box (with fuses) Output cabinet 2x Output cabinet 3x Output cabinet 4x 1800x2600x x2600x x10x800 00x600x x1550x x1780x x1780x SitePro 500 SitePro 500 kv without battery, with 12 pulse rectifier without galv. separation SitePro 500 kv without battery, prepared for 12 pulse rectifier with galv. separation RP kit installed in factory 12 pulse rectifier with galv. separation in separate cabinet Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse rectifier without galv. separation Input filter for 11th and 13th harmonic, in separate cabinet, for 50Hz, only with 12 pulse rectifier with galv. separation Distortion Control Unit, filter for 5,7,11,13 harmonics, in separate cabinet, for 50Hz attery fuse box (with fuses) Output cabinet 2x Output cabinet 3x Output cabinet 4x 1800x2600x x2600x x10x x10x800 00x600x x1550x x2200x x2200x (1) In case of common mains and DCU or filter (input to UPS and bypass) order also the cables For ordering please contact customer service..23

36 SitePro Series double conversion UPS Options miscellaneous Dimensions (hxwxd, mm) Ref. No. Order codes Kit to convert Single to RP operation for SitePro S6 (in case of ISM please order kit version E below) RP kit factory installed, version E, required in combination with ISM Kit to convert Single UPS to RP operation, version E, required in combination with ISM ISM Intelligent Synchronization Module (compatible with RP version E) Data cable for RP system between unit 6 meters Data cable for RP system between unit 12 meters Data cable for RP system between unit 30 meters Data cable for RP system between unit 85 meters Maxium distance between the first and the last UPS in one system is 85 meters dditional Customer Interface card (500 kv) Remote signalling panel (incl. 24 Vdc Power Supply) Remote monitoring system Kit to mount Chinese Display for SitePro S6 uxiliary Power Supply 24VDC, factory mounted only Top cable entry box (60 kv only) 2 bottom side grids + 1 x side panel for cabinet with factory installed batteries (60 kv) Mounting set for battery /17/24 H in 30 kv UPS cabinet Mounting set for 33 h battery in 40 kv UPS cabinet Note: UPS without batteries are also without battery mounting sets. To mount locally purchased batteries, order the mounting set. Options battery cabinets attery cabinet 500mm with 4 shelves (with 2 side panels and 2 bottom side grids) 40 kv attery cabinet 750mm with 4 shelves (with 2 side panels and 2 bottom side grids) 60 kv attery cabinet 10mm with 4 shelves (with 2 side panels and 2 bottom side grids) 60 kv Note: attery cabinets are normally mounted next to the UPS. For remote placement, order bottom grids and side panel. 1450x750x x10x800 attery cabinet 680mm with 4 shelves (3 mobile) c/w 1 x sides ( kv) attery cabinet 10mm with 4 shelves (3 mobile) c/w 1 x sides ( kv) attery cabinet 1550mm with 4 shelves (3 mobile) c/w 1 x sides ( kv) 2 bottom side grids + 1 x side panel for cabinet ( kv) Note: For all batteries installed on racks, it is recommended that a battery fuse box also be installed. Note: For battery cabinets that are placed more than 3 meters from the UPS, it is recommended that a battery fuse box (wallmounted) or battery fuse+holder (inside battery cabinet) also be installed. 1800x10x x1550x800 attery temperature sensor 5 meter attery temperature sensor 15 meter attery temperature sensor 20 meter attery temperature sensor 30 meter (shielded) Empty cabinet 500mm c/w 2 x sides and 2 x bottom grills (60 kv) Empty cabinet 750mm c/w 2 x sides and 2 x bottom grills (60 kv) Empty cabinet 10mm c/w 2 x sides and 2 x bottom grills (60 kv) Empty cabinet 680mm c/w 2 x sides and 2 x bottom grills ( kv) Empty cabinet 10mm c/w 2 x sides and 2 x bottom grills ( kv) Empty cabinet 1550mm c/w 2 x sides and 2 x bottom grills ( kv) Note: empty cabinets are battery cabinets without battery shelves 1450x750x x10x x10x x1550x800 Options active filter ctive Filter 45, 3wire ctive Filter 45, 3wire with EMI Filter IEC Class ctive Filter 115, 3wire ctive Filter 115, 3wire with EMI Filter IEC Class 800x800x x800x x680x x680x800 Options colour Non standard colour (per cabinet) (40 kv) Non standard colour (per cabinet) (60 kv) Non standard colour (per cabinet) ( kv) Options packing & tests Wooden crate (per cabinet) mandatory for sea and air freights (60 kv) Wooden crate (per cabinet) mandatory for sea and air freights ( kv) Reception test in our factory (per system per day) (40 kv) Reception test in our factory (per system per day) (60500 kv) For ordering please contact customer service..24

37 Notes SitePro double conversion.25

38 SG Series double conversion UPS pplications The online SG series UPS is an extremely reliable UPS providing critical power protection for a wide range of demanding missioncritical applications such as computer and data centers, medical facilities, broadcasting and satellite transmission systems, manufacturing and process control units, security systems, financial institutions, transportation infrastructure etc. etc. Order codes Function Providing exceptionally reliable protection for electrical equipment Standards / Marking Safety: EN ; IEC EMC: EN Characteristics The GE Digital Energy 3phase in / 3phase out highperformance SG Series is one of the best performing and most reliable threephase UPS systems providing critical power protection for a wide range of applications. Every SG Series system operates in VFI mode (Voltage Frequency Independent) yielding the maximum levels of power reliability for all missioncritical processes. The Digital Energy SG Series was developed using GE s Design for Six Sigma methodology to ensure that the product fully meets customer requirements and expectations. With proven technology the SG Series UPS provides top class reliability and performance. With backfeed protection and compliance to EMC standards the SG Series complies to current and future standards. Reliability can be further increased by paralleling up to eight UPS units utilising GE s unique RP technology (Redundant Parallel rchitecture). With RP every UPS is controlled in a true peertopeer configuration with redundancy in all critical elements and functions, eliminating all single points of failure. The decentralised bypass offers great flexibility to up or down grade the system in case future needs might change..26

39 Technical specifications Technical specifications (model dependent) Output power rating (kv) Output power rating (kw) Dimensions Weight (without batteries), kg Input current THD (optional) Dimensions, hxwxd (mm): = 1820x800x800 = 1820x1200x800 C = 1820x1650x800 Technical specifications (general) < 6% preliminary Input voltage range Vac Input frequency range 4565 Hz Output voltage 3x380//415 Vac (user selectable) Output frequency 50 or 60 Hz ± 0.01% (user selectable) Output power factor 0.9 Output voltage THD at linear load < 1% Output voltage THD at nonlinear load < 3% Overload capability on inverter 125% min., 150% 1 min. Output voltage regulation static < ± 1% Output voltage regulation dynamic (0% step load) < ± 2% (recovery time < 20 ms) System efficiency 98% on super ECO mode Protection degree IP 20 mbient operating temperature 0 to 40 C Relative humidity 95% noncondensing Interfacing std: RS232; potential free contacts, programmable relays attery extension optional ackfeed protection standard available Software compatibility JUMP DataShield, JUMP Manager, IRIS < 6% < 6% C 10 < 5% C 1300 < 5% SG Series double conversion Runtime table kv (1) (0% load, minutes) SG Series model 80 kv 0 kv 120 kv Capacity of battery set (V/h) 360 / 1x75 6 (2) (2) 360 / 1x / 2x92 33 (2) (2) 360 / 1x130 (2) / 2x (2) / 3x (2) 360 / 3x130 (2) (1) For the full SG Series range (80200 kv) runtimes are possible from 5 minutes up to 34 hours. Contact your dealer for customised battery solutions not mentioned in this catalogue. (2) This combination of battery set / UPS model is not available..27

40 SG Series double conversion UPS SG 80 Dimensions (hxwxd, mm) Net weight (kg) Ref. No. Order codes SG 80 kv without battery, with 6 pulse rectifier SG 80 kv without battery, with 6 pulse rectifier, with Class EMI filter SG 80 kv without battery, prepared for 12 pulse rectifier SG 80 kv without battery, prepared for 12 pulse rectifier, with Class EMI filter RP kit installed in factory 5th harmonic filter in UPS cabinet for THDi < 8% 5th and 11th harmonic filter in UPS cabinet for THDi < 6% 12 pulse rectifier without galv. separation in separate cabinet 12 pulse rectifier with galv. separation in separate cabinet Input isolation transformer in separate cabinet attery fuse box (without fuses) attery fuses for SG 80 kv Output cabinet 2x Output cabinet 3x Output cabinet 4x attery solutions, year lifetime, matching cabinets (1) attery 1x75 h, runtime 6 minutes attery 1x82 h, runtime 11 minutes attery 2x92 h, runtime 33 minutes attery 2x130 h, runtime 47 minutes attery 3x1 h, runtime 63 minutes 1820x800x x800x x800x x800x x500x x500x x500x xx x800x x800x x800x800 1x 1820x1200x800 1x 1820x1200x800 2x 1820x1200x800 2x 1820x1650x800 3x 1820x1200x SG 0 SG 0 kv without battery, with 6 pulse rectifier SG 0 kv without battery, with 6 pulse rectifier, with Class EMI filter SG 0 kv without battery, prepared for 12 pulse rectifier SG 0 kv without battery, prepared for 12 pulse rectifier, with Class EMI filter RP kit installed in factory 5th harmonic filter in UPS cabinet for THDi < 8% 5th and 11th harmonic filter in UPS cabinet for THDi < 6% 12 pulse rectifier without galv. separation in separate cabinet 12 pulse rectifier with galv. separation in separate cabinet Input isolation transformer in separate cabinet attery fuse box (without fuses) attery fuses for SG 0 kv Output cabinet 2x Output cabinet 3x Output cabinet 4x 1820x1200x x1200x x1200x x1200x x500x x500x x500x xx x800x x800x x800x attery solutions, year lifetime, matching cabinets (1) attery 1x82 h, runtime 8 minutes attery 1x130 h, runtime 15 minutes attery 2x1 h, runtime 31 minutes attery 3x1 h, runtime 48 minutes attery 3x130 h, runtime 61 minutes 1x 1820x1200x800 1x 1820x1650x800 2x 1820x1200x800 3x 1820x1200x800 3x 1820x1650x SG 120 SG 120 kv without battery, with 6 pulse rectifier SG 120 kv without battery, with 6 pulse rectifier, with Class EMI filter SG 120 kv without battery, prepared for 12 pulse rectifier SG 120 kv without battery, prepared for 12 pulse rectifier, with Class EMI filter RP kit installed in factory 5th harmonic filter in UPS cabinet for THDi < 8% 5th and 11th harmonic filter in UPS cabinet for THDi < 6% 12 pulse rectifier without galv. separation in separate cabinet 12 pulse rectifier with galv. separation in separate cabinet Input isolation transformer in separate cabinet attery fuse box (without fuses) attery fuses for SG 120 kv Output cabinet 2x Output cabinet 3x Output cabinet 4x 1820x1200x x1200x x1200x x1200x x500x x500x x500x xx x800x x800x x800x attery solutions, year lifetime, matching cabinets (1) attery 1x82 h, runtime 5 minutes attery 1x130 h, runtime minutes attery 2x130 h, runtime 30 minutes attery 3x130 h, runtime 46 minutes attery 4x130 h, runtime 66 minutes 1x 1820x1200x800 1x 1820x1650x800 2x 1820x1650x800 3x 1820x1650x800 4x 1820x1650x (1) ll runtimes based on nominal load, PF 0.8 For ordering please contact customer service..28

41 SG Series double conversion UPS SG 160 SG 200 SG 160 kv without battery, with 6 pulse rectifier SG 160 kv without battery, with 6 pulse rectifier, with Class EMI filter RP kit installed in factory 5th harmonic filter in UPS cabinet for THDi < 8% 5th and 11th harmonic filter in UPS cabinet for THDi < 6% Input isolation transformer in separate cabinet attery fuse box (without fuses) attery fuses for SG 160 kv Output cabinet 2x Output cabinet 3x Output cabinet 4x SG 200 kv without battery, with 6 pulse rectifier SG 200 kv without battery, with 6 pulse rectifier, with Class EMI filter RP kit installed in factory 5th harmonic filter in UPS cabinet for THDi < 8% 5th and 11th harmonic filter in UPS cabinet for THDi < 6% Input isolation transformer in separate cabinet attery fuse box (without fuses) attery fuses for SG 200 kv Output cabinet 2x Output cabinet 3x Output cabinet 4x Dimensions (hxwxd, mm) 1820x1650x x1650x x680x xx x800x x800x x800x x1650x x1650x x680x xx x800x x800x x800x800 Net weight (kg) Ref. No. SG Series double conversion Options miscellaneous RP kit factory installed, version E, required in combination with ISM Kit to convert Single UPS to RP operation, version E, required in combination with ISM ISM Intelligent Synchronization Module (compatible with RP version E) Data cable for RP system between unit 6 meters Data cable for RP system between unit 12 meters Data cable for RP system between unit 30 meters Data cable for RP system between unit 85 meters Maxium distance between the first and the last UPS in one system is 85 meters dditional Customer Interface card Remote signalling panel (incl. 24 Vdc Power Supply) Remote monitoring system uxiliary Power Supply 24VDC, factory mounted only Options battery cabinets Empty battery cabinet 800mm Empty battery cabinet 1200mm Empty battery cabinet 1650mm attery fuse holder and bracket (to be mounted in batt. cabinet in case of no batt, fuse box) Options active filter Options colour Options packing & tests attery temperature sensor 5 meter attery temperature sensor 15 meter attery temperature sensor 20 meter attery temperature sensor 30 meter (shielded) attery temperature sensor 60 meter (shielded) ctive Filter 45, 3wire ctive Filter 45, 3wire with EMI Filter IEC Class ctive Filter 115, 3wire ctive Filter 115, 3wire with EMI Filter IEC Class Non standard colour kv (per cabinet) Non standard colour kv (per cabinet) Wooden crate (per cabinet) mandatory for sea and air freights kv Wooden crate (per cabinet) mandatory for sea and air freights kv Reception test in our factory (per system per day) 1820x800x x1200x x1650x x800x x800x x680x x680x800 For ordering please contact customer service..29

42 STS Static Transfer Switch pplications Order codes Function Providing exceptionally reliable protection for electrical equipment Standards / Marking Safety: EN EMC: EN level, EN Static Transfer Switches (STS) are designed to transfer the supply between two independent C power sources. Unlike traditional automatic transfer switches (TS), a static transfer switch provides a fast load transfer (typically 1/4 of a cycle), which ensures uninterrupted operation of sensitive electronic equipment. Load retransfer to the preferred input source is virtually instantaneous (typically 0.1 ms). The basic applications of STS are in automatic systems in the power industry, power supply systems for petrochemical industry, computer and telecommunication centres, automatic and security systems of intelligent buildings as well as other equipment which is sensitive to interruptions in the supply. Characteristics The excellent overload capability and transfer algorithm enables fast fuse clearance in the event of a shortcircuit. s a consequence the voltage immediately returns to normal to supply the other loads. The builtin transient voltage surge suppression system for SCR switches provides additional protection against damage to the supplied equipment. The static transfer switch consists of two bidirectional thyristor switches for each phase equipped with a control and protection system. The 2 or 4 pole types have an additional neutral line switch. fter failure of the preferred source, the STS checks the state of the alternate power source and transfers the load to whichever source provides power within selectable limits. This transfer can be triggered by disturbance in the preferred source voltage, overcurrent in the source or manual or remote change of the preferred source. With both sources in limits and synchronised (phase error within the acceptable range), manual or remote transfer is performed in less than 200 μs. Transfers initiated by fault conditions in the preferred source depend on the status of the alternate source. For synchronised power sources with phase error within the limits, transfer to an alternate source is made within 6ms delay. Lack of synchronisation causes delay before transfer. It is possible to set the delay with dipswitches. Technical specifications (general) Nominal input voltage Vac phph / Vac phn Input voltage window nominal 25% +20% Nominal input frequency 50 Hz Input frequency range nominal 9% + 6% Efficiency > 99% at cos phi 0.8 Crest factor acceptance 3.5 Power factor (max. cos phi) (leading/lgging) mbient operating temperature 0 to 40 C Relative humidity 95% noncondensing ltitude 00 m (above 00 m 5% derating per 500 m; max m) Cooling redundant cooling fans udible noise <55 d() EMC EN level, EN Protection IP20 (floorstanding), IP 00 (rackmount models).30

43 STS Static Transfer Switch 1phase, 1pole stand alone Voltage Current Dimensions (hxwxd, mm) Ref. No. 1phase, 1pole 19 rackmount 1phase, 2pole stand alone 1phase, 2pole 19 rackmount 3phase, 3pole floorstanding 3phase, 3pole 19 rackmount 3phase, 4pole floorstanding 3phase, 4pole 19 rackmount Options Static Transfer Switch STS251P Static Transfer Switch STS401P Static Transfer Switch STS631P Static Transfer Switch STS01P Static Transfer Switch STS1501P Static Transfer Switch STS2501P Static Transfer Switch STS1P Static Transfer Switch STS251PRM Static Transfer Switch STS401PRM Static Transfer Switch STS631PRM Manual ypass for STS251PRM Manual ypass for STS40/631PRM Static Transfer Switch STS252P Static Transfer Switch STS402P Static Transfer Switch STS632P Static Transfer Switch STS02P Static Transfer Switch STS1502P Static Transfer Switch STS2502P Static Transfer Switch STS2P Static Transfer Switch STS252PRM Static Transfer Switch STS402PRM Static Transfer Switch STS632PRM Manual ypass for STS252PRM Manual ypass for STS40/632PRM Static Transfer Switch STS253P Static Transfer Switch STS403P Static Transfer Switch STS633P Static Transfer Switch STS03P Static Transfer Switch STS1503P Static Transfer Switch STS2503P Static Transfer Switch STS3P Static Transfer Switch STS6303P Static Transfer Switch STS8003P Static Transfer Switch STS003P Static Transfer Switch STS253PRM Static Transfer Switch STS403PRM Static Transfer Switch STS633PRM Static Transfer Switch STS03PRM Static Transfer Switch STS254P Static Transfer Switch STS404P Static Transfer Switch STS634P Static Transfer Switch STS04P Static Transfer Switch STS1504P Static Transfer Switch STS2504P Static Transfer Switch STS4P Static Transfer Switch STS6304P Static Transfer Switch STS8004P Static Transfer Switch STS004P Static Transfer Switch STS254PRM Static Transfer Switch STS404PRM Static Transfer Switch STS634PRM x507x x507x x507x440 10x800x 10x800x 1900x800x x800x x483x x483x x483x x483x x483x x507x x507x x507x440 10x800x 10x800x 1900x800x x800x x483x x483x x483x x483x x483x197 10x800x 10x800x 10x800x 10x800x 1900x800x x800x x1200x500 20x1200x600 0x1600x800 0x1600x800 7x483x465 7x483x465 7x483x465 7x483x465 10x800x 10x800x 10x800x 1900x800x x1200x x1200x500 20x1200x600 0x1200x600 0x1600x800 0x1600x800 7x483x465 7x483x465 7x483x465 STS Static Transfer Switch MODUS RS485 interface Seaworthy packing (also for air freights) 250 Seaworthy packing (also for air freights) Seaworthy packing (also for air freights) 630 For ordering please contact customer service..31

44 Connectivity solutions pplications Order codes Function IRIS Turning the UPS in to a comprehesive power quality solution, thus providing increased system availability and process protection. JUMP DataShield In today s business environment, a power failure causes loss of crucial data, expensive down time and damaged computers or industrial equipment. With the use of appropriate monitoring and management software, the UPS becomes a comprehensive power quality solution. The software is an indispensable and fully integrated element, increasing system availability and process protection. Characteristics During a power failure, the software takes a number of actions: users are alerted, processes are managed into defined statuses, open files and communication links are closed and unattended systems are shut down in a controlled way. When the mains power returns, the system is automatically started up and begins operating. Protection software The main function of the GE protection software is data and operating system protection. JUMP DataShield diminishes the risk of lost data or system crashes. The software provides events handling and computer shutdown for all major operating systems, protecting the security of precious data. Multivendor and multiplatform environments as well as clientserver structures are managed, using SNMPbased network communication protocols. Management software The GE UPS management software provides direct access to remote UPS and active management of each UPS in multiunit configurations to ensure efficient and predictable power quality. network manager or facilities engineer can use JUMP Manager to monitor and control the local or remote UPS, and the equipment and processes it protects. Typically, an SNMP connection, direct serial link or modem connection is used for this purpose. The UPS can also be monitored on the Internet using the GE IRIS system. JUMP Manager.32

45 Connectivity solutions Code reference table Code Related cable UPS interface / functionality cs IMVC or VIC25 contact / power failure, battery low & shutdown cp contact shutdown adapter contact / power failure, battery low & shutdown i IMVI or VIC23 intelligent / features depend on UPS type Network protection software This free software (on CDROM) and an intelligent communication cable are shipped with each UPS (except SitePro/SG Series UPS) dditional copies of this software can be ordered, all software is without cabling. Medium CDROM Operating system Microsoft Windows (all) Novell Netware IM OS/2 Linux T&T Intel COMPQ Tru64 Unix DEC UNI P lpha DEC Ultrix RISC DEC OpenVMS V/P HPU 700/800 IM I RISC/60x UNIWRE INTEL SCO INTEL Siemens SINI RM SUN OS SPRC ll OS supporting JV The CDROM contains UPS Protection and Management Program, incl. SNMP gent and Client. For detailed information on compatibility for the various versions please refer to detailed specifications. Code cp,i cs,i cp,i cp,i cp,i cp,i cp,i cp,i cp,i cp,i cp,i cp,i cp,i cp,i cp,i i Ref. No Connectivity Solutions Service software Windows all (Intel) PowerFLG SerVICe on CDROM i JUMP manager Product code Ref. No. Free to use with max. 2 single UPS or 2 complete parallel configurations, no limitation of managed power JUMP Manager on CDROM License for more than 2 UPS systems and max. 0 kv managed power License for more than 2 UPS systems and max. 00 kv managed power License for more than 2 UPS systems and unlimited managed power SSL security internet communication module i RGUS management software for SitePro UPS Product Free to use with max. 1 single UPS. Compatible with Windows 9.x RGUS Software Package 30 days full featured license License for 2 to single UPSs License for more than single UPSs License for more than 1 parallel UPS system License for unlimited number of single & parallel UPS system Intelligent Energy Management (IEM), only for parallel units (order also )

46 Connectivity solutions Code reference table Code Related cable UPS interface / functionality cs IMVC or VIC25 contact / power failure, battery low & shutdown cp contact shutdown adapter contact / power failure, battery low & shutdown i IMVI or VIC23 intelligent / features depend on UPS type IRIS software Product code Ref. No. Order codes ccessories hardware interfaces Starter Kit (incl. 1st year fee and InterLinc box) IRIS starter kit, per system, incl. messaging and refresh fter 1st year (excl. InterLinc box) IRIS yearly fee after 1st year, incl. messaging and refresh Contact UPS Relayox Contact UPS Splitterox 2way Contact UPS Splitterox 4way Contact UPS larmox Contact UPS Shutdown dapter UPS Service ox (1) SNMP/Web Interface Card UTP for Match (19 ) (2), NetPro (19 ), LP11/31T/31 dvanced SNMP/Web Interface card UTP/NC for LP33, SitePro Series 6 and SG Series SNMP/Web Interface ox Ethernet UTP/NC (1) for Match (19 ), NetPro (19 ), LP11/31(T); With Lincbox also valid for SitePro Series 5 Relay card for Match 700L1500 (3) and Match (3) Relay card for Match (19 ) , NetPro (19 ) and LP11/31(T) Multi Serial oard (8 x RS232) (1) nalogue modem for IRIS (1) (Only valid for European market) (1) (4) Converter RS232RS485 kit US2Serial adaptor pack c cs cs c cs cs,i i i cs,i i i i (1) These products are delivered including cable(s). (2) Not for Match and Match ; alternative: SNMP ox, rt.no (3) Not for Match and Match ; alternative: Relay ox, rt.no (4) Not needed if ESI is installed. Only if distance is more than 15m ccessories hardware interfaces for SitePro External Signal Interface (ESI) Linc ox: CP4 Protocol Converter Modbus RTU Interface RS 232 (MatchNetProLPSiteProSG Series) Modbus RTU Interface RS 485 (MatchNetProLPSiteProSG Series) i i i These products are delivered including cable(s). ccessories cable kits adapters ML Series Connectivity Cable (1.5m) C Cable IEC320 male / female, 1.5 m IMVI Cable Intelligent UPS (2m) for LP and SitePro VIC23 Cable Intelligent UPS (2m) for Match and NetPro IMVC Cable Kit Contact UPS (2m) VIC32 Cable UPS to modem (2m) for Match and NetPro IMVM Cable UPS to modem (2m) for LP and SitePro Series 6 dapter 9p male > 25p female subd IM S Cable Kit for builtin UPS driver (2m) i i i cs i i c,cs,i c Note: length of all cables is 2 meters.34

47 Uninterruptible Power Supplies Introduction Order codes Numerical Index.1

48 Ref. No. Page Ref. No. Page The policy of GE Consumer & Industrial is one of continuous improvement. The right is reserved to alter the design or any structural details of the products at any time without giving notice. September 2005 GE Consumer & Industrial.2

49 Notes.3

50 Notes.4

51 GE Consumer & Industrial Power Protection Power Protection (formerly GE Power Controls), a division of GE Consumer & Industrial, is a first class European supplier of lowvoltage products including wiring devices, residential and industrial electrical distribution components, automation products, enclosures and switchboards. Demand for the company s products comes from wholesalers, installers, panelboard builders, contractors, OEMs and utilities worldwide GE POWER CONTROLS International Sales Nieuwevaart Gent elgium Tel. +32/ Fax +32/ [email protected] GE POWER CONTROLS Hornhouse Lane Knowsley Industrial Park Liverpool L33 7YQ United Kingdom Tel. 0800/ Fax 0800/ [email protected] GE imagination at work Ref. I/3184/E/E 5.0 Ed. 09/05 Copyright GE Consumer & Industrial 2005 ll specifications subject to change without prior notice