4.0 UPS dedicated to ICT for unmatched energy savings

Transcription

1 4.0 UPS dedicated to ICT for unmatched energy savings

2 Introducing UPSaver by Borri, a new modular UPS series for the ICT industry, totally configurable, quickly scalable, with high efficiency and low TCO. Applications Cloud Data center equipment must be easily scalable to react quickly to the fast-changing ICT market. It must also guarantee a low total cost of ownership and a low PUE (Power Usage Effectiveness defined as the ratio of total amount of power used by the facility to the power delivered to ICT equipment), which is the most commonly used figure to evaluate a data center s energy performance. Data servers Networking services Telco equipment

3 4 benefits for your business Continuous saving: 400,000 euros after 5 years per 500 kw of power usage Certified continuity: maximum efficiency in all modes of operation Maximum flexibility: modular, easy expandable, 4 modes of operation for best power quality under any conditions Minimum lifecycle cost and minimum environmental footprint The UPSaver philosophy Conventional UPS work in on-line double conversion, at about 95% efficiency. Considering that in all developed countries mains are free from disturbances for most of the time, UPSaver can significantly increase its efficiency by using UPS conversion only when it s actually needed. UPSaver moves the concept of static conversion from Uninterruptible Power Supply to Uninterruptible Power Saver, a permanent saving system continuously monitoring the mains to guarantee high quality power to your ICT equipment at minimum energy usage. UPSaver versus conventional UPS Conventional UPS Up to 95% efficiency Few system configuration options Low system expandability No hot maintenance or system resizing Low power density UPSaver 99.5% maximum efficiency Any system configuration option High system expandability Hot maintenance and system resizing, no need to switch to bypass line High power density

4 4 level modularity 1) Removable power modules for easy maintenance and low MTTR 2) Unit modularity for flexible and quick system power expansion 3) System modularity to make your business grow up to more than 7 MW Save energy to empower your business: with UPSaver dynamic mode of operation you choose how much you save 10 years savings* per 500 kw power usage Using UPSaver instead of an IGBT-based on-line double conversion UPS 400, , , ,000 based on European average electricity price * 200, , ,000 50, Using UPSaver instead of a legacy SCR-based 12p on-line double conversion UPS 800, ,000 This study has been done in collaboration with the Measurement, Reliability and Quality Laboratory of the Information Engineering Department at University of Florence UPSaver pure double conversion UPSaver strategy UPSaver pure Ultra High Efficiency 600, , , , , ,

5 4) Synchronized systems modularity for seamless transfer between two independent power lines Easy connection system: with UPSaver I/O module any maintenance or system configuration operation is easy, safe and can be carried out without switching to bypass line Distributed and centralised static bypass configuration A line B line 4 modes of operation UPSaver can function in all IEC EN classified modes of operation. Set the best mode of operation for your application or enable the UPSaver strategy algorithm to monitor the mains and switch between its modes of operation to always feed the load with the highest quality power at the highest efficiency. Double High Efficiency: all the on-line double conversion protection (VFI-Voltage frequency independent mode), at 96% efficiency with Borri patented Green Conversion technology. ECO mode: suitable for stable mains, in VFD (Voltage Frequency Dependent) mode of operation achieving 98% efficiency. Very High Efficiency: maximum efficiency in unstable mains conditions with Active Filtering, the Borri VI (Voltage Independent) mode of operation achieving 97% efficiency. Ultra High Efficiency: the most innovative technology for ICT equipment total protection with 99.5% efficiency and minimum total cost of ownership.

6 Long battery life Green Battery Management and Green Conversion technology save battery life, by mitigating the major root causes of battery ageing, such as ripple current and floating charge micro currents. Full power factor Thanks to its IGBT-based technology UPSaver has both an input and output unit power factor, thus acting as a power factor correction system for the upstream source feeding any power factor load up to its maximum rated power. GE friendly Unit input power factor, input THDi <3%, programmable soft start and hold-off features make UPSaver your Genset s best friend. General Data Input Output Connection type Nominal voltage Hardwired 4w (rectifier), 4w (bypass) 380/400/415 Vac 3-phase with neutral Voltage tolerance -20%, +10% Frequency and range 50/60 Hz (45 65 Hz) Power factor 0.99 Current distortion (THDi) <3% Connection type Nominal voltage Frequency Voltage regulation (VFI) Power factor Overload capability Hardwired 4w 380/400/415 Vac 3-phase with neutral 50/60 Hz ±1% static; ±5% dynamic for 100% step load, recovery time <10 ms Any power factor up to 1, without power derating Inverter: % for 10 min; % for 1 min; bypass: 150% continuous, 1000% for 1 cycle UHE mode AC/AC efficiency 99.5% VFI mode AC/AC efficiency 96.0% Classification as per IEC EN Environmental System VFI-SS-111 Operating temperature 0 C +40 C Storage temperature -10 C +70 C Altitude Audible noise at 1m (dba) <1000 m <50 (UHE) Protection degree IP 20 Colour RAL 9005 Installation layout Accessibility Standards and certifications Quality assurance, environment, health and safety Wall, back to back and side by side installation allowed Front and top access, bottom and top cable entry Safety IEC EN EMC IEC EN Test and performance IEC EN Marking ISO 9001:2008, ISO 14001:2004, GOST, BS OHSAS 18001:2007 CE

7 Transformer-free design With its transformer-free architecture UPSaver is compact, efficient and more environmentally sustainable. Smart parallel Whether you use it in a power or an N+R redundant parallel, UPSaver feeds the required power to the load with the minimum number of modules. Switching off unnecessary modules further enhances system efficiency. Backfeed protection UPSaver comes with both detection circuitry and input terminal disconnection contactor for maximum operator safety. for more information visit us at UPSaver Unit Nominal power (kw) UPS dimensions WxHxD (mm) 460x1690x x1900x850 UPS weight (kg) UPSaver System 100 N parallel N+1 parallel N nominal power (kw) N+1 nominal power (kw) Dimensions WxHxD (mm) 1380x1690x x1690x x1690x x1690x880 UPS weight (kg) UPSaver System 200 N parallel N+1 parallel N nominal power (kw) N+1 nominal power (kw) Dimensions WxHxD (mm) 2250x1900x x1900x x1900x x1900x x1900x850 UPS weight (kg) Connectivity and function extensions Front panel Remote communication Optional function extensions Graphic display. Optional: touch screen display Serial RS232 and USB; input terminal block for remote emergency power off (REPO), battery circuit breaker aux. cont., external maintenance bypass circuit breaker aux. cont. Optional: input terminal block for diesel mode aux. cont., SNMP adapter (Ethernet), web interface (Ethernet), ModBus-TCP/IP (Ethernet); ModBus-RTU (RS485); ModBus-RTU to PROFIBUS DP adapter; SPDT contact relay board; UPS managing and server shutdown software Isolation transformer, external maintenance bypass, custom battery cabinets, wall-mounted battery fuse switch box, battery thermal probe, load-sync box

8 Borri is a company specialized in custom design, manufacturing and servicing of power electronics equipment for industrial and IT applications. Borri s R&D department is one of the most complete regarding the different disciplines in the field of power conversion. Long experience in semiconductors and magnetic component design is combined with the most advanced digital regulation algorithms and microcontroller programming know-how. Borri has a leading position in the oil and gas market thanks to its proven customizing expertise and continuous pursuit of excellence in a state-of-the-art product. However, wide experience in several branches of power electronics such as UPS systems for data centers and inverters for renewable energy and storage, make Borri a leader in this technology not only for oil and gas applications. The latest patented three-phase solution based on its green conversion operation can guarantee the best PUE for green data centers: proof of the ongoing company commitment to innovation. Based in Italy with 12,000 m 2 production space and a large full-testing area, the company can call on more than 80 years experience and multidisciplinary research and development. Borri has a strong global presence and is represented in all 5 continents where it can provide on-site service and technical support. Our solutions UPSaver Series, 3/3 phase modular UPS, 60 to 200 kw, the most versatile and cost-effective way to build up and power your IT business up to 7.2 MW STS100/300 series, 1/1 and 3/3 phase Static Transfer Switch, safely add redundancy to all your applications B9000/9600FXS Series, 3/3 phase UPS, 60 to 800 kva, for rugged power solutions to continuous cooling, industrial type critical load, and ESS Systems (ESS = Emergency, Safety & Security) B8000FXS Series, 3/3 and 3/1 phase transformer-free UPS, 10 to 100 kva for effective local area data and critical load protection Borri Via 8 Marzo, Bibbiena (AR) Italy Tel Fax sales@upsaver.info