Audio/Video AVR Series UPS - Intelligent Automatic Voltage Regulated Power Management System

Transcription

1 Audio/Video AVR Series UPS - Intelligent Automatic Voltage Regulated Power Management System MODEL NUMBER: HTR05-1U Description Tripp Lite's HTR05-1U AVR Series intelligent, Automatic Voltage Regulated UPS System prevents media data loss, equipment freeze-ups, downtime and equipment damage due to power outages, voltage fluctuations and transient surges. Network-grade AC surge suppression improves component life spans, protects sensitive A/V components from damage due to transient surges and helps component performance (fuller audio/sharper video) by filtering disruptive EMI/RFI line noise. Requires only one rack space (1U). Large internal batteries provide 17 min. half-load runtime and 5 min. full load runtime. Maintains regulated 120V nominal output without using battery power during brownouts as low as 90V. 500VA/300W power handling capability is compatible with audio/video components and other sensitive electronic applications. Includes 6 UPS-supported outlets with a single-outlet load bank that can be individually controlled via software interface to reboot select equipment on demand or automatically shed less significant loads to extend battery runtime for more critical equipment. Includes 1 surge-only outlet for peripherals not requiring battery backup. Supports simultaneous remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports. Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter for the ultimate in IP remote access, control and diagnostics capability with notification. Multi-function audible alarms and set of 5 front panel LEDs provide at-a-glance notification of UPS and line power status. $250,000 Ultimate Lifetime Insurance (USA and Canada Only). Features HTR05-1U AVR Series line-interactive UPS offers battery-derived sine wave AC output during power outages, voltage regulation during brownouts, plus network-grade AC surge suppression 500VA/300W power handling capability compatible with micro display devices, projectors, PVRs/DVRs, media center PCs, music servers and other sensitive electronic devices Maintains regulated 120V nominal output during brownouts as low as 90V Large internal batteries offer 17 min. runtime at half load (250VA/150W) and 5 min. runtime at full load (500VA/300W) Network-grade AC surge suppression protects sensitive A/V components from damage due to transient surges and improves component performance (fuller audio/sharper video) by filtering disruptive EMI/RFI line noise Highlights 500VA - 300Watt Automatic Voltage Regulated 1U UPS System 7 outlets; 1 switchable load IP remote access, control and diagnostics capability with notification (built-in accessory slot; SNMPWEBCARD available separately) Simultaneous communications via SNMPWEBCARD slot, USB and DB9 serial ports Drivers written for Crestron, AMX and Savant for seamless integration $250,000 Ultimate Lifetime Insurance (USA and Canada Includes 6 UPS-supported outlets with a single outlet load bank that can be powered on and off again via software interface. An additional surge-only 1 / 5 Only) Package Includes HTR05-1U AVR Series UPS System Mounting hardware USB and DB9 cabling PowerAlert Software Instruction manual with warranty information

2 Includes 6 UPS-supported outlets with a single outlet load bank that can be powered on and off again via software interface. An additional surge-only outlet powers accessories not requiring battery support PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager and notification, event logging and running user-defined script commands Offers simultaneous monitoring by up to 3 directly connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software Communication ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter Multi-function audible alarms and 5 front panel LEDs 1U rackmount; rackmount hardware included UPS battery set ships fully assembled and ready for installation; no time-consuming connection of internal batteries by user is necessary Attractive all-black color scheme $250,000 Ultimate Lifetime Insurance (USA and Canada Only) Specifications OUTPUT Output Volt Amp Capacity (VA) 500 Output Watt Capacity (watts) 300 Output power factor 0.6 Nominal Output Voltage(s) Supported Frequency compatibility 120V 60 Hz Output voltage regulation (line mode) -15%, +13% Output voltage regulation (Battery mode) Built-in UPS output receptacles Surge suppression only outlets Built-in controllable switched load banks Output AC waveform (AC mode) Output AC waveform (battery mode) +/- 5% R outlet(s) 6 UPS outlets, 1 surge-only outlets One switchable single-outlet 5-15R load bank Sine wave PWM sine wave INPUT Rated input current (at maximum load) Nominal Input Voltage(s) Supported 5.6A 120V AC UPS input connection type 5-15P 2 / 5

3 Input circuit breaker 15A UPS Input cord length (ft.) 10 UPS Input cord length (m) 4.5 Recommended Electrical Service 15A 120V BATTERY Full load runtime (minutes) Half load runtime (minutes) 5 min. (300w) 17 min. (150w) DC system voltage (VDC) 12 Battery recharge rate (included batteries) Replacement battery cartridge (internal UPS battery replacement) Battery Access Battery replacement description Less than 4 hours from 10% to 90% RBC62-1U Front panel battery access door Hot-swappable, user replaceable batteries VOLTAGE REGULATION Voltage regulation description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 90 to 136 Undervoltage correction Input voltages between 90V and 108V are boosted by 14% LEDS ALARMS & SWITCHES LED Indicators Alarms Alarm cancel operation Switches 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status Audible alarm indicates power-failure, overload and low-battery conditions Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status 2 Switches control off/on power status and alarm-cancel/self-test operation SURGE / NOISE SUPPRESSION UPS AC suppression joule rating EMI / RFI AC noise suppression 480 joules Yes AC suppression joule rating 480 AC suppression response time Instantaneous PHYSICAL Primary form factor UPS / Power Module dimensions in primary form factor (height x width x depth / inches) Rackmount 1.7 x 17.5 x / 5

4 UPS / Power Module dimensions in primary form factor (height x width x depth / cm) Rack Height 4.4 x 44.4 x U UPS / Power Module weight (lbs) 18.8 UPS / Power Module weight (kg) 8.5 UPS Shipping dimensions (height x width x depth / inches) UPS Shipping dimensions (height x width x depth / cm) 5 x 22.5 x x 57.2 x 40.6 Shipping weight (lbs) 22 Shipping weight (kg) 10 UPS housing material Steel ENVIRONMENTAL Operating Temperature Range Storage Temperature Range Relative Humidity +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius 0 to 95%, non-condensing AC mode BTU / hr. (full load) 65.1 Battery mode BTU / hr. (full load) AC mode efficiency rating (100% load) 94% COMMUNICATIONS Communications interface Network monitoring port description PowerAlert software Communications cable WatchDog compatibility USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface Supports detailed monitoring of UPS and site power conditions Included USB and DB9 cabling included Supports Watchdog application, OS and hard-reboot restart options for remote applications LINE / BATTERY TRANSFER Transfer time Low voltage transfer to battery power (setpoint) High voltage transfer to battery power (setpoint) 2-4 milliseconds SPECIAL FEATURES Grounding lug Back panel grounding lug 4 / 5

5 Cold Start (startup in battery mode during a power failure) High availability UPS features Green & high efficiency features Cold-start operation supported Hot swappable batteries Individually controllable load banks CERTIFICATIONS UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI) WARRANTY Product Warranty Period (Worldwide) Connected Equipment Insurance (U.S., Canada & Puerto Rico) 2-year limited warranty $250,000 Ultimate Lifetime Insurance Related Items Optional Products Model Number Description Qty. DCATV Network Surge Suppressor - Essential protection for TV/VCR coaxial lines 1 More information, including related products, owner's manuals, and additional technical specifications, can be found online at: Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products. 5 / 5