High voltage tester HA 1800 Table-top device

Size: px

Start display at page:

Download "High voltage tester HA 1800 Table-top device"

Sharyl Reed
8 years ago
Views:

1 High voltage tester HA 1800 Table-top device single devices Ethernet USB RS-232 digital I/O n ergonomic table-top device, supported by a user-friendly operation n conforms to CE, in accordance with EN n calibration via Ethernet interface n automatic test process n 4.3" TFT display n time basis seconds n optical and audible alarm n min./max. limiting value comparator n micro processor controlled n internal clock / calendar n 24 VDC control interface n PC remote control interface n high voltage test pistols n n PC remote control software Technical data HA 1800B Technical data HA 1800G Technical data HA 1800J safety current limited 100-5C / 3 ma VDC / 4 ma VDC / 40 ma n warning lamp set All parameters are ly programmable. 6

limiting value comparator n micro processor controlled n internal clock / calendar n 24 VDC control interface n PC remote control interface n high voltage test pistols n n PC remote control

2 High voltage tester HA '' / 5 HU rack single devices Ethernet USB RS-232 digital I/O Technical data HA 1880B Technical data HA 1880G Technical data HA 1880J safety current limited 100-5C / 3 ma VDC / 4 ma VDC / 40 ma n conforms to CE, in accordance with EN n calibration via Ethernet interface n supported by a user-friendly operation n automatic test process n 4.3" TFT display n time basis seconds n optical and audible alarm n min./max. limiting value comparator n micro processor controlled n internal clock / calendar n 24 VDC control interface n PC remote control interface n high voltage test pistols n n PC remote control software n warning lamp set All parameters are ly programmable. 7

operation n automatic test process n 4.3" TFT display n time basis 0.1-999.9 seconds n optical and audible alarm n min./max.

3 Single devices High voltage test devices HA 3600A With high voltage testers air and leakage paths are tested. Measurement of test voltages is specified in the relevant standards (IEC, EN, UL, BS, VDE, etc.). As a general rule applies: rated voltage x V Due to their low these devices (series HA 3600) are especially well equipped to be used as mobile units in industry and service. A high voltage error is displayed visually or audibly. In addition the error can be localized by means of operating mode burn-out. portable, manual devices visual and audible alarm burn-out, error localization connection for warning lamps analogue measuring instrument for voltage, class 1.5 high voltage test pistol warning lights kV / 100 ma 14 / 3 HU ca. 18 kg Phone Fax info@spselectronic.com

As a general rule applies: rated voltage x 2 + 1000 V Due to their low these devices (series HA 3600) are especially well equipped to be used as mobile units in industry and service.

4 Single devices High voltage test devices HA 3600D With high voltage testers air and leakage paths are tested. Measurement of test voltages is specified in the relevant standards (IEC, EN, UL, BS, VDE, etc.). As a general rule applies: rated voltage x V Due to their low these devices (series HA 3600) are especially well equipped to be used as mobile units in industry and service. A high voltage error is displayed visually or audibly. In addition the error can be localized by means of operating mode burn-out. portable, manual devices visual and audible alarm (t), with dwell time burn-out, error localization connection for ext. start (for foot switch or test pistol with start signal) connection for warning lamps good / fault test signal via interface analogue measuring instrument for voltage, class 1.5 analogue measuring instrument for current, class 1.5 test cage high voltage test pistols warning lights current range time basis / dwell time 0.25, kv / 100 ma 0-10 ma ma (reversible via toggle switch) 1-60 s 14 / 3 HU ca. 18 kg Phone Fax info@spselectronic.com

5 Single devices High voltage test devices HA 3881B High voltage testers of series HA 3881 are a completely new generation of test devices. This device concept meets all the application requirements for manual operation, automatic protocolling as well as a fully automatic system application. Software packages for remote control support complete concepts and OEM-users. Special attention has been paid to a user-friendly operation via knob and a 5.7 colour display. As an a keyboard or a barcode reader can be connected via USB interface. The programme memory adapts dynamically to the test requirements. Up to 8 digital IN- / OUTPUTS are processed during the test allowing the realization of small customer-specific test stations with adapters and switch matrix without additional controls. Optionally, up to 24 digital IN-/OUTPUTS are possible. Via a comfortable WINDOWS-software remote control with a PC is possible. The printer interface allows protocols of all parameters and test and measurement results according to standard. Due to the integrated Ethernet interface several high voltage testers of series 3881 can be operated in a network with one server PC. The setup of this network solution allows the reading-in of the DUT directly at the high voltage tester via a connected barcode reader. Selection of test programme and filing of test results is carried out on the server PC. The technical data of series HA 3881 comply with all of the relevant standards (IEC, EN, UL, VDE, etc.). For system application (OEM-users) additional sense modules for 4-wire measurement and rear high voltage interfaces are available. secondary measurement of current and voltage remote control ramp function optical and audible alarm large 5.7 colour display operation via knob and / or keyboard micro processor controlled dynamic programme memory internal clock / calendar automatic test process interfaces: 24 VDC interface / PLC remote control interface USB interface for barcode reader / keyboard Ethernet RS 232 connection for remote control operation and printer integration of IN- / OUTPUTS into test process: 8 digital inputs 8 digital outputs 2 analouge inputs Optionen PC-remote control software rearside connection high voltage test pistols warning ligts output DC insulation test (IR) rear connection kv / 10 ma <12 ma bound 19 / 4 HU ca. 20 kg Phone Fax info@spselectronic.com

Software packages for remote control support complete concepts and OEM-users. Special attention has been paid to a user-friendly operation via knob and a 5.7 colour display.

6 Single devices High voltage test devices HA 3881G High voltage testers of series HA 3881 are a completely new generation of test devices. This device concept meets all the application requirements for manual operation, automatic protocolling as well as a fully automatic system application. Software packages for remote control support complete concepts and OEM-users. Special attention has been paid to a user-friendly operation via knob and a 5.7 colour display. As an a keyboard or a barcode reader can be connected via USB interface. The programme memory adapts dynamically to the test requirements. Up to 8 digital IN- / OUTPUTS are processed during the test allowing the realization of small customer-specific test stations with adapters and switch matrix without additional controls. Optionally, up to 24 digital IN-/OUTPUTS are possible. Via a comfortable WINDOWS-software remote control with a PC is possible. The printer interface allows protocols of all parameters and test and measurement results according to standard. Due to the integrated Ethernet interface several high voltage testers of series 3881 can be operated in a network with one server PC. The setup of this network solution allows the reading-in of the DUT directly at the high voltage tester via a connected barcode reader. Selection of test programme and filing of test results is carried out on the server PC. The technical data of series HA 3881 comply with all of the relevant standards (IEC, EN, UL, VDE, etc.). For system application (OEM-users) additional sense modules for 4-wire measurement and rear high voltage interfaces are available secondary measurement of current and voltage remote control ramp function optical and audible alarm large 5.7 colour display operation via knob and / or keyboard micro processor controlled dynamic programme memory internal clock / calendar automatic test process interfaces: 24 VDC interface / PLC remote control interface USB interface for barcode reader / keyboard Ethernet RS 232 connection for remote control operation and printer integration of IN- / OUTPUTS into test process: 8 digital inputs 8 digital outputs 2 analouge inputs Options PC-remote control software rearside connection high voltage test pistols warning ligts test cage output DC insulation test (IR) rear connection kv / 100 ma 500 va kv / 100 ma 500 va 19 / 4 HU ca. 20 kg Phone Fax info@spselectronic.com

7 Single devices High voltage test devices HA 5012L With these high voltage testers air and leakage paths are tested. Measurement of test voltages is specified in the relevant standards (IEC, EN, UL, BS, VDE, etc.). As a general rule applies: rated voltage x V The high voltage tester series HA 5012L has been developed solely for application in automatic test systems. These devices are remote controlled via a 24 VDC / PLC remote control interface. Current and voltage are supplied via analogue, signals (0-10 VDC). Analogue inputs (0-10 VDC) are available for rated value defaults. conforms to CE, in accordance with EN electronic, wear-proof cutting-in via semi-conductor relay in zero pause analogue instrument class 1.5 for voltage analogue instrument class 1.5 for current secondary measurement of current and voltage rear connections for all interfaces PLC remote control interface analogue programming of release current (0-10 VDC) analogue output for voltage (0-10 VDC) analogue output for current (0-10 VDC) voltage programming (0-230 V or V) separate earthing contact connection for warning lamp set Options current range 1 ma / 10 ma kv / 100 ma kv / 50 ma yes 19 / 4 HU Phone Fax info@spselectronic.com

As a general rule applies: rated voltage x 2 + 1000 V The high voltage tester series HA 5012L has been developed solely for application in automatic test systems.

Safety and function tester series 1800

Safety and function tester series 1800 ELECTRICAL SAFETY TEST DEVICES n HIGH VOLTAGE n INSULATION n EARTH BOND n LEAKAGE CURRENT n FUNCTION n CONTINUITY n SURGE TEST n WINDING SHORT CIRCUIT n PARTIAL DISCHARGE