Eaton s E-Series protective relay family
|
|
|
- Madeleine York
- 8 years ago
- Views:
Transcription
1 E-Series protective relays Feeder distribution relays Motor relays Transformer relays Generator relays Eaton s E-Series protective relay family Microprocessor-based design
2 Eaton s E-Series relay family introduction The protective relay family Eaton s E-Series protective relays offer a microprocessor-based overcurrent design that is compatible with both ANSI and IEC applications. They are panel-mounted, self-contained units that operate from either AC or DC control power. Eaton s E-Series relays provide you with unique microprocessor-based devices that protect motors, feeder distribution circuits, transformers and generators. All E-Series relays have the option for zone selective interlocking and maintenance mode. E-Series relay programmable logic equations allow for configurations such as M-T-M (no, open or closed) retransfer and M-M preferred source schemes to easily be added, eliminating the requirement for separate PLC controls. AND, NAND, and N gates are included using a standard assignment list (protective function states, breaker states, system alarms and module inputs). Up to 80 logic are available with four inputs each, including internal and output timer logic gates. EDR-5000 EMR-000 ETR-5000 EGR-5000 Feeder distribution relay Feeder distribution relays provide complete protection for medium voltage feeder distribution lines. Models include: EDR-000 EDR-5000 Motor relay Motor relays provide complete and reliable motor protection for any size motor at different voltage levels, including diagnostics, monitoring and starting control functions. Models include: EMR-000 Transformer relay Transformer relays provide primary protection, control and backup protection of transformers, including current differential, restricted ground differential and overcurrent protection. Models include: ETR-4000 Generator relay Generator protection relays can be used to protect any size generators. They may be used as primary or backup protection in standby generators and cogeneration applications. Models include: EGR-4000 EMR-4000 ETR-5000 EGR-5000 EMR-5000 Common software tools All E-Series relays use PowerPort-E software for easy access to information and programming groups. Whether you are using the front panel or the software, the interface is the same on all models. Operation System Parameters Protection Parameters Device Parameters Control Logic Device Planning Service Download PowerPort-E software at 2 EATON E-Series protective relays
3 Common features Front Panel Access Communication Interfaces Rear View IRIG-B Time Sync RS-485 Connector (Standard) Fiber Optic Port URTD Module RS-22 Port (Standard) Ethernet (RJ-45) Port Reference order guide for availability by model. E-Series Relay Family Feature Comparison Chart Description EDR-000 EDR-5000 EMR-000 EMR-4000 EMR-5000 ETR-4000 ETR-5000 EGR-4000 EGR-5000 Communications Protocols Modbus RTU (RS-485) standard n n n n n n n n n IEC-6850 MMS (Ethernet) optional n n N/A n n n n n n IEC-6850 Goose (Ethernet) optional n n N/A n n n n n n Modbus TCP/IP (Ethernet) optional n n n n n n n n n Metering and Monitoring Features Current (pos, neg and zero seq.) n n n n n n n n n Current demand n n n n n n n n Differential current n n n Voltage (pos, neg and zero seq.) n n n n n n Phase angles n n n n n n n Volt-amperes and VA demand n n n n n n Watts and kw demand n n n n n n kwh (forward, reverse and net) n n n n n n VARs and kvar demand n n n n n n kvarh (lead, lag and net) n n n n n n Power factor n n n n n n Frequency n n n n n n Volts/Hz n rd harmonic voltage n % THD current n n n n n n n n % THD voltage n n n n n Magnitude THD current n n n n n n n Magnitude THD voltage n n n n n Min./max. recording n n n n n n n n n Sync values n n n Temperature with remote URTD module n n n n n n n Trip circuit monitoring n n n n n n n n n Breaker wear n n n n n n n n n CT supervision n n n n n n n n VT supervision n n Waveform recorder (6000 cycles typical) 600 cycles n n n n n n n n Fault recorder (20 events) n n n n n n n n n Sequence of events recorder (00 events) n n n n n n n n n Trend recorder n n n n n n n n Motor history n n n Motor start trending n n n Generator hours of operation n n Programmable logic equations n n n n n n n n EATON E-Series protective relays
4 Eaton s distribution relay family EDR Series Model comparison guide protective functions EDR-000 Protection functions 50 Breaker failure 50P Phase instantaneous overcurrent 50R Calculated ground or neutral instantaneous overcurrent 50X Measured ground or neutral instantaneous overcurrent 5P Phase overcurrent protection per time-current curve 5R Calculated ground fault protection per time-current curve 5X Measured ground or neutral fault protection per time-current curve CLPU Cold load pickup SOTF Switch on to fault CTS Current transformer supervision 74TCM Trip coil monitor (option) ZI Zone selective interlocking (option) EDR-5000 The EDR-5000 has all of the same protection functions as the EDR-000 with additional Enhanced protection functions 27A/M Auxiliary and main three-phase undervoltage 46 Phase unbalance negative sequence overcurrent 47 Phase voltage unbalance and sequence protection 55A/D Apparent and displacement power factor 59A/M Auxiliary and main three-phase overvoltage 59N Ground fault overvoltage 67P Directional overcurrent 67X Calculated directional overcurrent 78V Vector surge element 8U/O/R Under and over and rate of change frequency LOP Loss of power 25 Sync check 2 Forward and reverse watts 2V Forward and reverse VARs 5V Voltage restraint 79 Auto-reclosing Typical one-line example ANSI protective guide Protective key 27A 59N 59A on EDR-000 and EDR-5000 on EDR TCM 50P 5P 50 50R 5R 46 67P 67R LOP See Page for metering CTS SOTF CLPU 25 50X 5X 55 A/D 67X 8 47 U/O 8R 78V 27M 59M 5V 2 2V circuit breaker. EDR family ordering guide EDR A 0 B A Relay Model 000 = Current protection relay 5000 = Differential current, voltage and power protection relay EDR-000 Hardware Option A = 4 DI, 4 outputs, removable terminals B = 8 DI, 6 outputs, removable terminals, trip coil monitor C = 4 DI, 4 outputs, removable terminals, zone interlocking (ZI) and IRIG-B EDR-5000 Hardware Option A = 8 DI, outputs, removable terminals, ZI and IRIG-B B = 8 DI, outputs, removable terminals, ZI, IRIG-B and large display Mounting Options 0 = Standard mount = Projection mount Conformal Coating Options A = None B = Conformal coated circuit boards Communication Options B = Modbus RTU (RS-485) standard H = IEC-6850 (MMS and Goose) I = Modbus RTU + Modbus TCP/IP Hardware Option 2 0 = Phase current 5A/A, ground current 5A/A, power supply range: 9 00 Vdc, Vac = Phase current 5A/A, sensitive ground current 0.5A/0.A, power supply range: 9 00 Vdc, Vac 4 EATON E-Series protective relays
5 Eaton s motor relay family EMR Series Model comparison guide protective functions EMR-000 EMR-4000 EMR-5000 Protection functions 50 Breaker failure 50P Phase instantaneous overcurrent 50R Calculated ground or neutral instantaneous overcurrent 50X Measured ground or neutral instantaneous overcurrent 5P Phase overcurrent protection per time-current curve 5R Calculated ground fault protection per time-current curve 5X Measured ground or neutral fault protection per time-current curve 46 Phase unbalance negative sequence overcurrent 49/8 Thermal protection using optional URTD module 49/5 Thermal overload protection (I 2 T) 49S/5 Locked rotor 50J Jam or stall protection 7 Underload protection 66 Starts per time period 4 Underspeed CTS Current transformer supervision 74TCM Trip coil monitor (option) ZI Zone selective interlocking (option) 86 Lockout protection The EMR-4000 has all of the same protection functions as the EMR-000 with additional Enhanced protection functions 27A/M Auxiliary and main three-phase undervoltage 47 Phase voltage unbalance and sequence protection 55A/D Apparent and displacement power factor 59A/M Auxiliary and main three-phase overvoltage 59N Ground fault overvoltage 2/2V Forward and reverse watts and VARs 5V Voltage restraint 78V Vector surge element 8U/O/R Under and over and rate of change frequency LOP Loss of power CLPU Cold load pickup SOTF Switch on to fault The EMR-5000 has all of the same protection functions as the EMR-4000 with additional Enhanced protection functions 87M Differential current Typical one-line example ANSI protective guide 74 TCM 50X 50 50P 5 5P 50R CTS 7 5X SOTF 55 A/D CLPU 27A 5R /5 49S/ 5 59A 50J 2 2V LOP Protective key on all EMR models on EMR-4000 and EMR-5000 on EMR-5000 See Page for metering 47 8 U/O 8R 78V 27M 59M 5V Motor Load 4 87M 49/8 URTD Module EMR family ordering guide EMR A 0 B A Relay Model 000 = Current protection relay 4000 = Current, voltage and power protection relay 5000 = Differential current, voltage and power protection relay EMR-000 Hardware Option A = 4 DI, 4 outputs, removable terminals B = 8 DI, 6 outputs, removable terminals, trip coil monitor C = 4 DI, 4 outputs, removable terminals, zone interlocking (ZI) and IRIG-B EMR-4000 Hardware Option A = 8 DI, outputs, removable terminals, ZI and IRIG-B B = 8 DI, outputs, removable terminals, ZI, IRIG-B and large display EMR-5000 Hardware Option A = 8 DI, outputs, removable terminals, ZI and IRIG-B B = 8 DI, outputs, removable terminals, ZI, IRIG-B and large display Mounting Options 0 = Standard mount = Projection mount Conformal Coating Options A = None B = Conformal coated circuit boards Communication Options B = Modbus RTU (RS-485) standard H = IEC-6850 (MMS and Goose) I = Modbus RTU + Modbus TCP/IP Hardware Option 2 0 = Phase current 5A/A, ground current 5A/A, power supply range: 9 00 Vdc, Vac = Phase current 5A/A, sensitive ground current 0.5A/0.A, power supply range: 9 00 Vdc, Vac EATON E-Series protective relays 5
6 Eaton s transformer relay family ETR Series Model comparison guide protective functions ETR-4000 Protection functions 87R Dual-slope percentage restrained current differential with magnetizing inrush and over-excitation blocking 87H Unrestrained current differential 87GD Restricted ground fault / ground differential 50P Instantaneous overcurrent with timers 50R Instantaneous calculated with timers 50X Instantaneous measured with timers 5P Inverse time overcurrent 5Q Negative sequence phase overcurrent 5R Inverse time overcurrent calculated 5X Inverse time overcurrent measured Breaker failure 49 Temperature protection SOTF Switch onto fault protection CLPU Cold load pickup 74TCM Trip coil monitor ZI Zone selective interlocking for bus protection Breaker failure ETR-5000 The ETR-5000 has all of the same protection functions as the ETR-4000 with additional Enhanced protection functions 46 Phase unbalance negative sequence overcurrent protection 47 Phase voltage unbalance and sequence protection 27M/59M Main three-phase under/overvoltage protection 27A/59A Auxiliary single-phase under/overvoltage protection 8 Frequency that can be assigned to: overfrequency, underfrequency, rate of change or vector surge 2 Forward and reverse watts protection 2V Forward and reverse VARs protection 24 Over-excitation, volts-per-hertz protection 86 Lockout protection Typical one-line example ANSI protective guide CTRL Winding Side Winding Side 2 TCM 87 87H TCM CTRL LOP 24 Protective key on all ETR models on ETR-5000 See Page for metering Inrush Bloc ZI 50P R 50X 5X ZI 50P R Inrush Bloc 59M 27M 5P QR 5P QR CLPU SOTF 87G D 87G DH 59A 27A 2/ 2V circuit breaker. ETR family ordering guide ETR A 0 B A Relay Model 4000 = Current and differential current protection relay 5000 = Differential current, voltage and power protection relay ETR-4000 Hardware Option A = 8 DI, 9 outputs, removable terminals, 2 zone interlocking (ZI) and URTD interface ETR-5000 Hardware Option A = 8 DI, 9 outputs, removable terminals, 2 zone interlocking (ZI) and URTD interface B = 8 DI, 9 outputs, 2 AI, 2 AO, removable terminals, zone interlocking (ZI) and URTD interface Mounting Options 0 = Standard mount = Projection mount Conformal Coating Options A = None B = Conformal coated circuit boards Communication Options B = Modbus RTU (RS-485) standard H = IEC-6850 (Goose) I = Modbus RTU + Modbus TCP/IP Hardware Option 2 0 = Phase current 5A/A, ground current 5A/A, power supply range: 9 00 Vdc, Vac = Phase current 5A/A, sensitive ground current 0.5A/0.A, power supply range: 9 00 Vdc, Vac 6 EATON E-Series protective relays
7 Eaton s generator relay family EGR Series Model comparison guide protective functions EGR-4000 Protection functions 50 Breaker failure 50P Phase instantaneous overcurrent 50R Calculated ground or neutral instantaneous overcurrent 50X Measured ground or neutral instantaneous overcurrent 5P Phase overcurrent protection per time-current curve 5P(2) & 5P() have 5V Voltage restraint 5R Calculated ground fault protection per time-current curve 5X Measured ground or neutral fault protection per time-current curve 49/5 Thermal protection element 67P/67R/67X/67N Directional overcurrent 46 Phase unbalance negative sequence overcurrent 47 Phase voltage unbalance and sequence protection 27A/27M Auxiliary and main three-phase undervoltage 59A/59M Auxiliary and main three-phase overvoltage 59N Ground fault overvoltage element 8U/O Underfrequency and overfrequency 78V Vector surge element 55A/55D Apparent and displacement power factor 2 Forward and reverse watts 2V Forward and reverse VARs 24 Over-excitation, volts-per-hertz (64S) 27TN/59N Stator ground fault 46G Generator unbalance 40 Loss of excitation 25 Sync check 79 Auto-reclosing 86 Lockout LOP Loss of power CLPU Cold load pickup SG Wear Switchgear wear SOTF Switch on to fault CTS Current transformer supervision 74TCM Trip coil monitor (option) ZI Zone selective interlocking (option) EGR-5000 The EGR-5000 has all of the same protection functions as the EGR-4000 with additional Differential protection functions 87 Phase current differential protection 87H Unrestrained high-set differential current protection 87GD Restricted ground fault protection 87GDH High-set restricted ground fault protection 50/27 Inadvertent energization Typical one-line example ANSI protective guide Protective key 27A 59A on all EGR models on EGR TCM 24 27M 47 59M 59M X 5X See Page for metering 87 GD G 2 2V 40 50/27 50P/ 5P 50/ 5V 55 LOP 67R 67X G CLPU SG Wear CTS SOTF 67P 67N 50R 5R R circuit breaker. EGR family ordering guide EGR A 0 B A Relay Model 4000 = Current, voltage and power protection relay 5000 = Differential current, voltage and power protection relay EGR-4000 Hardware Option A = 8 DI, 5 outputs, 2 AI, 2 AO, zone interlocking (ZI) and URTD interface Mounting Options 0 = Standard mount = Projection mount Conformal Coating Options A = None B = Conformal coated circuit boards EGR-5000 Hardware Option A = 6 DI, 9 outputs, zone interlocking (ZI) and URTD interface B = 6 DI, 9 outputs, 2 AI, 2 AO, zone interlocking (ZI) and URTD interface Communication Options B = Modbus RTU (RS-485) standard H = IEC-6850 (Goose) I = Modbus RTU + Modbus TCP/IP Hardware Option 2 0 = Phase current 5A/A, ground current 5A/A, power supply range: 9 00 Vdc, Vac = Phase current 5A/A, sensitive ground current 0.5A/0.A, power supply range: 9 00 Vdc, Vac EATON E-Series protective relays 7
8 E-Series Relay Family Standard Accessories Description Universal RTD module with Modbus RTU Vac / Vdc Universal RTD module with Modbus RTU Vdc m fiber optic cable for relays / URTD communications 5m fiber optic cable for relays / URTD communications 0m fiber optic cable for relays / URTD communications 25m fiber optic cable for relays / URTD communications E-Series RS-22 null modem cable E-Series USB to RS-22 converter E-Series RS-22 cable and USB to RS-22 converter Catalog Number URTDII-0 URTDII-02 MPF0- MPF0-5 MPF0-0 MPF B224G0 66B224G02 66B224G0 Eaton 000 Eaton Boulevard Cleveland, OH 4422 United States Eaton.com 20 Eaton All Rights Reserved Printed in USA Publication No. BR02600EN / Z460 October 20 Eaton is a registered trademark. All other trademarks are property of their respective owners.
E-Series protective relay family
E-Series protective relays Feeder distribution relays Motor relays Transformer relays Generator relays E-Series protective relay family Reliable protection for every application Eaton s E-Series relay
Motor Protection Relay
Contents Description Page Key Features, Functions and Benefits.......... 2 General Description....................... 2 Features................................ 3 Protection and Control Functions.............
Applications. diris_826_a_1_gb_cat
Measurement units NEW diris_824_a_1_cat Energy monitoring and management of low voltage/ high voltage electrical installations Function are measurement units which can provide all the functions offered
Nu-Lec Training Modules
PTCC Controller Nu-Lec Training Modules Product Training Operator Training PTCC The Basics An overview of the construction and physical features of the Pole Top Control Cubicle PTCC Operation and Features
FP-4000 Feeder Protection
FP-4000 Feeder Protection Technical Data TD02602007E Effective September 2007 Supersedes TD02602003E Pages 1 8, Dated March 2006 FP-4000 FP-4000 Product Description........................... 2 Application
G650. Protection, control and monitoring for generator interconnection. Digital Energy Multilin. Communications
G650 & ontrol System Protection, control and monitoring for generator interconnection Key Benefits omplete distributed generator interconnection protection with two protection options, Basic Protection
Power-monitoring unit PowerLogic System. Technical data sheet. Power Meter Series 800
Power-monitoring unit PowerLogic System Technical data sheet 2003 Power Meter Series 800 Function and characteristics PB100313 The PowerLogic Power Meter Series 800 offers all the high-performance measurement
TURBOtech srl. SED-635 Digital Excitation System. Industrial Electronics Sector FEATURES
SED-635 Digital Excitation System SED-635 is a complete excitation system capable of adapting to control synchronous generators of any size. The integration of the TOUCH SCREEN operator interface and a
Motor Protection Relay
Contents Description Page Key Features, Functions and Benefits.......... 2 General Description....................... 2 Features................................ 3 Protection and Control Functions.............
EMR-3000 Modbus Register Maps
EMR-3000 Modbus Register Maps IM02602007E EMR-3000 Table of Contents Modbus Parameters... 3 Notes for the SCADA-System... 4 Specific Modbus Function Codes... 5 Setting Date and Time... 9 Supported Modbus
Product Description Full Voltage Starting Electric Fire Pump Controllers FTA1000
Product Description Full Voltage Starting Electric Fire Pump Controllers FTA1000 Description Firetrol FTA1000 Full Voltage Fire Pump Controllers are intended for use with electric motor driven fi re pumps
SCADA Controlled Multi-Step Automatic Controlled Capacitor Banks & Filter Banks
SCADA Controlled Multi-Step Automatic Controlled Capacitor Banks & Filter Banks Introduction SCADA (Supervisory Controlled and Data Acquisition) controlled multi-step metalenclosed automatic capacitor
Power Meter Series 700
PowerLogic power-monitoring units Power Meter Series 700 Technical data sheet 2007 Functions and characteristics E90463 The PowerLogic Power Meter Series 700 offers all the measurement capabilities required
Generator Protection Relay
Contents Description Page Key Features, Functions, and Benefits......... 2 General Description....................... 2 Features................................ 3 Protection and Control Functions.............
ATC-300 Automatic Transfer Switch Controller
ATC-300 Technical Data New Information Technical Data Page 2 Effective: May 2004 ATC-300 Introduction The Cutler-Hammer ATC-300 from Eaton s Electrical business is a comprehensive, multi-function, microprocessor-based
Features. Display. Measurements. Intelligent. Accuracy. Models. Installation DEIF A/S. Multi-instrument 4921210109D
7000/7000C/7020 Multi-instrument 4921210109D Features Measurements All 3-phase AC measurements True RMS Replaces analogue meters Demand on each phase current Accuracy U, I and F class 0.5 Other values
BT300 HVAC Drives Conventional Bypass (C-Bypass) Options
BT300 HVAC Drives Conventional Bypass (C-Bypass) Options Description The BT300 Conventional Bypass is a companion package for the family of BT300 HVAC Drives. For information on the family of BT300 HVAC
Fundamentals of Power
Fundamentals of Power Fundamentals of Power 2008 American Power Conversion Corporation. All rights reserved. All trademarks provided are the property of their respective owners. Learning Objectives At
DRTS 33. The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters
The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual
GE Protection and Control Business Department. Page 1 Date 5/11/99
GE Protection and Control Business Department Page 1 GE Protection and Control Business Department Proven Overcurrent Protection with Power Management Communication The The Advantages of Microprocessor
Model 8220. POWER QUALITY ANALYZERS, METERS & LOGGERS Power Quality Meter
Special product features '''' ENERGY METER ''' MEASURES RPM POWER QUALITY ANALYZERS, METERS & LOGGERS Power Quality Meter Model A measurement tool for electrical parameters and distribution network disturbances
RISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features:
Application : RISH Master 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network & replaces the multiple analog
C441 series communication modules Accessories for electronic overload relays and soft starters. Monitoring and control made simple
C441 series communication modules Accessories for electronic overload relays and soft starters Monitoring and control made simple Monitoring and control made simple C441 series communication modules Eaton
Sentron Series Circuit Breakers
Sentron Series Circuit Breakers Siemens Sentron Series circuit breakers are available in nine frame sizes: ED, FD, JD, LD, LMD, MD, ND, PD, and RD. Sentron Series circuit breakers have a wide range of
Gas Genset Controls. Genset Control Panel (GCP2) with PCS (PowerCommand Supervisor) Features. Description
Gas Genset Controls Genset Control Panel (GCP2) with PCS (PowerCommand Supervisor) Description The Cummins Power Genset Control Panel (GCP2) is an integrated monitoring and control system for the Cummins
..OR How To Protect your 3-Phase Equipment Investment with 3-Phase Monitors from Time Mark...
..OR How To Protect your 3-Phase Equipment Investment with 3-Phase Monitors from Time Mark... TIME MARK CORPORATION 11440 EAST PINE STREET TULSA, OK 74116 USA tel 918 438-1220 fax 918 437-7584 www.time-mark.com
Motor Protection Relay
Supersedes March 2011 Contents Description Page Key Features, Functions and Benefits.... 2 General Description.... 2 Features.... 3 Protection and Control Functions... 4 Diagnostic Features.... 5 Monitoring
How To Protect Your Power Supply From Dangerous Currents And Voltages
ids ACOS 300 Protection equipment for medium and highvoltage grids ACOS 300 Protection Devices Already minor incidents, such as branches dropping on overhead lines or underground cables damaged by construction
Generator Differential Relay Electrical Apparatus
Generator Differential Relay Electrical Apparatus MD3G Rotating Machine Differential Relay 150-3 The MD3G Rotating Machine Differential Relay is a member of Cooper Power Systems Edison line of microprocessor
Automatic Transfer Switch Controller
Automatic Transfer Switch Controller Decision-Makerr MPAC 1500 Model KBS with Decision-Makerr MPAC 1500 Controller Applicable Models Model Description KCS Standard-Transition Any Breaker ATS ] KCP Programmed-Transition
A project to optimise quality and energy efficiency must include metering
EMDX 3 : Energy Metering A project to optimise quality and energy efficiency must include metering Metering upstream identifies the critical points and ensures optimum targeting of the actions to be taken,
Cahier technique no. 196
Collection Technique... Cahier technique no. 196 Integration of local power generation in industrial sites and commercial buildings T. Hazel "Cahiers Techniques" is a collection of documents intended for
Maximize protection. MiCOM series 10, 20, 30, 40. Make the most of your energy. Comprehensive range of digital protection relays
Maximize protection MiCOM 10, 20, 30, 40 Comprehensive range of digital protection relays Make the most of your energy Increase energy availability Maximize energy availability and the profits generated
Transfer Equipment Controls
Control Types Manual Transfer Switches Nonautomatic Transfer Switches Automatic Transfer Switches The type of control system for the transfer switch will vary depending on the type of switching equipment
Integrated protection and control for medium sized AC motors
Key Benefits Enhanced Thermal Model including RTD and Current Unbalance Biasing plete Asset monitoring with programmable RTD inputs for Stator, Bearing and Ambient temperature protection Enhanced reporting
Galleon 6-10K Online UPS. Voltronic Power Technology Corporation
Galleon 6-10K Online UPS Voltronic Power Technology Corporation Features Galleon online UPS series delivers optimal power quality, provides superior power management, resolves utility power protection
Unified requirements for systems with voltages above 1 kv up to 15 kv
(1991) (Rev.1 May 2001) (Rev.2 July 2003) (Rev.3 Feb 2015) Unified requirements for systems with voltages above 1 kv up to 15 kv 1. General 1.1 Field of application The following requirements apply to
Feeder protection. for overhead lines and cables in isolated neutral or compensated networks. Specification
Feeder protection for overhead lines and cables in isolated neutral or compensated networks Specification Feeder protection for overhead lines and cables in isolated neutral or compensated networks Version
Automatic Transfer Switch-Controller ATS-C by Eaton. Automatic Transfer Switch- Controller ATS-C 96 and C 144
Automatic Transfer Switch-Controller ATS-C by Eaton Automatic Transfer Switch- Controller ATS-C 96 and C 144 Supply safety for low voltage energy distribution. Automatic Transfer Switch-Controller ATS-C
Uninterruptible Power Supply
96-01101 / rev. 2e / 2-2-12 Uninterruptible Power Supply EXCEPTIONAL SUPPORT & PROTECTION Uninterruptible Power Supply with Energy Saver design that is optimized to address the needs of A/V systems Features
Motor Protection Principles. Craig Wester GE Multilin Craig.Wester@GE.com
Motor Protection Principles Craig Wester GE Multilin Craig.Wester@GE.com Motor History & Facts The first U.S. patent for a motor was issued to Thomas Davenport in 1837. Today in North America, more than
OVR-3SP Recloser with PCD Control Style Guide 1VAL263901-SG March 30, 2009 Revision B
OVR-3SP Recloser with PCD Control Style Guide 1VAL263901-SG March 30, 2009 Revision B The OVR-3SP three-phase recloser style guide aids in the proper selection of your OVR-3SP style number. The OVR-3SP
SOLARCARE SERIES PRODUCT AND APPLICATION GUIDE
SOLARCARE SERIES PRODUCT AND APPLICATION GUIDE for solar energy management LEATEC Delivering Solutions for Energy Management SOLAR ENERGY DATA CENTER BUILDING 4 to8 String Monitoring with 0.% Accuracy
LTR Series Uninterruptible Power Systems 700 VA - 2.1 KVA. General Specification
08/17/12 Rev2 LTR Series General Specification 700 VA to 2.1 KVA 1.0 General LTR Series Uninterruptible Power Systems 700 VA - 2.1 KVA General Specification This specification describes the features and
GTEC transfer switch open transition
GTEC transfer switch open transition 40-1250 Amp Description The GTEC automatic transfer switch combines reliability and flexibility in a small, economical package for transferring loads between a utility
Application/Connection Examples
This Quick Start Guide is designed to familiarize the user with the connection and configuration of the DTS-305 DIN rail mounted single / 3 phase power & energy meter with RS-485 or TCP communications.
Metering Devices IQ Analyzer 6400/6600 Series
Metering Devices IQ Analyzer 6400/6600 Series Technical Data Supersedes TD.17.02A.T.E pages 1-8 dated May 2000 Description Page General Description............................................. 2 Applications....................................................
Remote Monitoring and REC 501 Control Unit Product Guide
Remote Monitoring and Control Unit REC 501 Product Guide Issued: May 1999 Status: Updated Version: B/06.11.2001 Data subject to change without notice Features Remote control and monitoring unit for the
Numerical transformer protection in medium voltage networks Transformer Protection and Control RET620
Guideform Specification 1MRS758531 A Numerical transformer protection in medium voltage networks Transformer Protection and Control RET620 The configurable transformer management relay is intended for
OVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F
OVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F The OVR three-phase recloser style guide aids in the proper selection of your OVR three-phase style number.
Eaton s Electrical Services & Systems. Technical Training Safety Training
Eaton s Electrical Services & Systems Technical Training Safety Training 2 EATON CORPORATION Eaton s Electrical Services & Systems Technical Training Safety Training Eaton conducts technical training and
SECTION 16002C CAMPUS CENTRAL METERING SYSTEM DESIGN CRITERIA 1. General
SECTION 16002C CAMPUS CENTRAL METERING SYSTEM DESIGN CRITERIA 1. General A. Electrical usage on the Brown campus is presently monitored by a Siemens-brand, web-based central metering system, which includes
PowerCommand Paralleling System Digital MasterControl
PowerCommand Paralleling System Digital MasterControl Description The PowerCommand Digital MasterControl is a systemlevel controller designed to interface directly with Cummins Power Generation PowerCommand
Arc Terminator Active Arc-Resistant Switchgear
Arc Terminator Active Arc-Resistant Switchgear Increasing safety and productivity by extinguishing internal arcing faults within the switchgear. The Square D Arc Terminator from Schneider Electric offers
How To Test A Power Switch On A Power Supply
transfer switches Soft load Innovative, reliable, integrated solution Built with years of experience Powered with innovation Delivered with reliability A history of experience, innovation and reliability
Relion 611 series. Feeder Protection and Control REF611 Application Manual
Relion 611 series Feeder Protection and Control REF611 Document ID: 1MRS757456 Issued: 2011-11-18 Revision: A Product version: 1.0 Copyright 2011 ABB. All rights reserved Copyright This document and parts
Reverse-feed applications for circuit breakers
Technical Publication PU01200001E Contents Description Page Intoduction.......................................................................... 2 breaker classifications..........................................................
POWER SYSTEM ACCESSORIES
POWER SYSTEM ACCESSORIES Monitor III Software Applicable Controllers Software for Monitoring and Control of: Decision-Maker 550 generator set controller Decision-Maker 340 generator set controller Decision-Maker
Bulletin 150 SMC Flex Smart Motor Controller Specifications
Specifications Specifications Standard Features Optional Features Installation Setup Communications Power Wiring Control Wiring Keypad Software Starting and Stopping Modes Protection and Diagnostics Metering
Product Description Primary Resistance Starting Electric Fire Pump Controllers FTA1500
Product Description Primary Resistance Starting Electric Fire Pump Controllers FTA1500 Description Firetrol FTA1500 Primary Resistance Fire Pump Controllers use resistors in the line to reduce line voltage
TOSHIBA G9000 80/100/160/225 kva
CORPORATE OFFICE 13131 WEST LITTLE YORK ROAD HOUSTON, TX 77041 PHONE: (713) 466-0277 (800) 231-1412 FACSIMILE: (713) 896-5226 TOSHIBA G9000 80/100/160/225 kva GUIDE SPECIFICATION THREE PHASE UNINTERRUPTIBLE
Tmax MCCBs. Molded case circuit breakers. Tmax
Molded case circuit breakers Introduction ABB is once again demonstrating its commitment to new product development and its superiority in product performance. Never before has the industry seen such high
3500/22M Transient Data Interface
3500/22M Transient Data Interface Bently Nevada* Asset Condition Monitoring Description The 3500 Transient Data Interface (TDI) is the interface between the 3500 monitoring system and GE s System 1* machinery
Submit shop drawings for equipment provided under this section Shop drawings shall indicate:
Section 16435 - SWITCHBOARDS Introduction Part 1 - General Reference The work under this section is subject to requirements of the Contract Documents including the General Conditions, Supplementary Conditions,
UNIVERSITY OF WASHINGTON Facilities Services Design Guide. Electrical. Switchboards. Basis of Design. Design Evaluation
Basis of Design This section applies to the design relating to low voltage switchboards. Design Criteria UW Class N1 facilities main switchboards shall be rear accessible. The main, tie and feeder breakers
How To Protect A Motor From Overcurrent
Phase ailure elays Type PS and PD Class 8430 Catalog 04 CONTENTS Description.....................................................Page Product Description and Definitions......................................
Test & Data Management Software
Test & Data Management Software TDMS protective relays energy meters transducers power quality CT-VT-PT transformers ground grid circuit breakers batteries surge arresters The Integrated Testing Solution
THYRISTORS T1-1PH from 850A to 2700A Specifications Universal 1 Phase Thyristor Unit 55-77-03-62, March 2012
Technical Information THYRISTORS T1-1PH from 850A to 2700A Specifications Universal 1 Phase Thyristor Unit 55-77-03-62, March 2012 GENERAL DESCRIPTION THYRISTORS T1-1PH is a full digital and universal
TAA-Compliant SmartPro 120V 1kVA.8kW Line-Interactive Sine Wave UPS, SNMP, Webcard, 1U Rack, USB, DB9 Serial
TAA-Compliant SmartPro 120V 1kVA.8kW Line-Interactive Sine Wave UPS, SNMP, Webcard, 1U Rack, USB, DB9 Serial MODEL NUMBER: SM1000RM1UTAA Description Tripp Lite SM1000RM1UTAA 1000VA / 1kVA / 800 watt line
How To Operate A Gec Transfer Switch Open Transition 40 2000 Amp Power Supply
GTEC Transfer switch open transition 40 2000 amp Description GTEC transfer switches combine reliability and flexibility in a small, economical package for transferring loads between a utility and a generator
User Manual V1.0 2014 SDM220MODBUS. Single-Phase Two Module DIN rail Meters
SDM220MODBUS Single-Phase Two Module DIN rail Meters Measures kwh, Kvarh, KW, Kvar, KVA, PF, Hz, dmd, V, A, etc. Di-directional measurement IMP & EXP Two pulse outputs RS485 Modbus Din rail mounting 36mm
EnerVista Viewpoint Monitoring
EnerVista Viewpoint Monitoring Easy to Use Monitoring and Data Recording EnerVista Viewpoint Monitoring is an easy to setup, powerful and simple to use data monitoring and recording software application
How To Use The Vacon 0 Machinery
vacon 0 machinery how would you like your ac drive today? easy adaptation for customer requirements The Vacon 0 Machinery is an extremely compact AC drive for machine builders in the power range from 0.25
Liebert GXT MT+ CX UPS, 1000VA - 3000VA Intelligent, Reliable UPS Protection. AC Power for Business-Critical Continuity
Liebert GXT MT+ CX UPS, 1000VA - 3000VA Intelligent, Reliable UPS Protection AC Power for Business-Critical Continuity Liebert GXT MT+ CX UPS, 1000VA -3000VA Intelligent, Reliable UPS Protection Liebert
VOLTAGE REGULATOR AND PARALLEL OPERATION
VOLTAGE REGULATOR AND PARALLEL OPERATION Generator sets are operated in parallel to improve fuel economy and reliability of the power supply. Economy is improved with multiple paralleled generators by
Electrical Network Management System
Electrical Network Management System Optimisation of the electrical network Measure to understand Understand to control Control to optimise Cost of power and fluids Power quality Power availability 2 Improvement
How To Use A Powerbook 2.2 (Powerbook 2) For Free On A Computer Or Ipad (Powerware) For A Week Or Two (For A Week) For $99.99 (For An Extended Period Of Time)
100% electricity Digital multimeters and power analyzers series DIGITAL MULTIMETERS AND POWER ANALYZERS with backlit graphic LCD screen For the control of energy distribution systems detecting when problems
EARTH LEAKAGE PROTECTION: CONTENTS
EARTH LEAKAGE PROTECTION: CONTENTS Earth Leakage Relays 128-130 Trip Circuit Supervision Relays 128-130 TEMPROTECT Protection and Distribution 1A to 6300A page 127 EARTH LEAKAGE PROTECTION ELR-1E The ELR-1E
PacifiCorp Original Sheet No. 476 FERC Electric Tariff, Substitute 6 th Rev Volume No. 11 APPENDIX 2 TO SGIP
PacifiCorp Original Sheet No. 476 APPENDIX 2 TO SGIP SMALL GENERATOR INTERCONNECTION REQUEST (Application Form) Transmission Provider: Designated Contact Person: Address: Telephone Number: An Interconnection
Communicate and view data from meters with one simple device
Communicate and view data from meters with one simple device PowerLogic EGX300 integrated gateway-server Web Monitoring Communications Plug and Play Plug into your energy usage with a simple mouse click
Installation manual. Generator Paralleling Controller GPC multi-line 2 4189340225C
Installation manual Generator Paralleling Controller GPC multi-line 2 Software ver. 1.3X Compact system in one unit - dynamic synchronisation - load sharing - generator protection DEIF A/S 3-phase AC RMS
Power Xpert Gateway 800E
Technical Data TD152006EN Power Xpert Gateway 800E Delivers real-time, Web-enabled monitoring of electrical distribution and control equipment Product snapshot The Power Xpert Gateway 800E is typically
MiCOM P139. Feeder Management and bay Control. Multifunction IEDs. CustOMEr benefits. APPlICAtIOn
01 Feeder Management and bay Control The is a cost effective one-box solution for integrated numerical time-overcurrent protection and bay control. The broad spectrum of protection functions enables the
SmartPro 120V 750VA 600W Line-Interactive Sine Wave UPS, 1U Rackmount, SNMPWEBCARD Option, USB, DB9 Serial
SmartPro 120V 750VA 600W Line-Interactive Sine Wave UPS, 1U Rackmount, SNMPWEBCARD Option, USB, DB9 Serial MODEL NUMBER: SMART750RM1U Highlights.75kVA / 750VA / 600W line interactive 1U rackmount UPS,
SmartPro 120V 750VA 600W Line-Interactive Sine Wave UPS, SNMP, Webcard, 1U Rack-Mount, USB, DB9 Serial
SmartPro 120V 750VA 600W Line-Interactive Sine Wave UPS, SNMP, Webcard, 1U Rack-Mount, USB, DB9 Serial MODEL NUMBER: SMART750RM1U Highlights.75kVA / 750VA / 600W line interactive 1U rackmount UPS, Sine
SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, SNMP, Webcard, 1U Rack, USB, DB9 Serial
SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, SNMP, Webcard, 1U Rack, USB, DB9 Serial MODEL NUMBER: SMART1000RM1U Description Tripp Lite SMART1000RM1U 1000VA / 1kVA / 800 watt line interactive,
ATC-900 Automatic Transfer Switch Controller
ATC-900 Automatic Transfer Switch Controller center industries. An intelligent control architecture allows the ATC-900 to address virtually any system requirements. Typical applications include utility-to-utility,
Suitable for Emergency, Peak and Prime Power System Applications. Low Voltage Automatic Transfer Switch Systems
Suitable for Emergency, Peak and Prime Power System Applications Low Voltage Automatic Transfer Switch Systems THE POWER AUTHORITY THE POWER AUTHORITY ASCO s experience and commitment to excellence in
SECTION 13421 PROGRAMMABLE LOGIC CONTROLLERS AND COMPUTER CONTROL SYSTEM PART 1 GENERAL. 1.01 Summary. A. Section Includes:
SECTION 13421 PROGRAMMABLE LOGIC CONTROLLERS AND COMPUTER CONTROL SYSTEM PART 1 GENERAL 1.01 Summary A. Section Includes: 1. The ISS shall furnish all labor, materials, equipment, services and incidentals
IEC 61850: Communication Networks and Systems in Substations
IEC 61850: Communication Networks and Systems in Substations Sistemi e strumenti per l'automazione, A. Flammini, AA2011-2012 Background I: Power Grid Sistemi e strumenti per l'automazione A. Flammini,
SmartOnline 200-240V 6kVA 4.2kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 6U Rack/Tower, DB9 Serial, Hardwire
SmartOnline 200-240V 6kVA 4.2kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 6U Rack/Tower, DB9 Serial, Hardwire MODEL NUMBER: SU6000RT3UHV Highlights 6000VA / 6kVA / 4200W on-line double-conversion
Limited Service Fire Pump Controllers Features
Must Be Installed Per Applicable Code and Manufacturers Recommendations Limited Service Fire Pump Controllers Features 1-1 FD20 Full Voltage - Limited Service with Plus Microprocessor Power I/O Board Transformers
Managing. Energy management and power analysis
management and power analysis Power monitors IN 96 and 144 - Selection table... 68 - IN 96, recdigit NOUS... 70 - IN 144, recdigit POWER... 72 - Multi-display recisplay... 73 Winthor software... 74 Managing
100% Stator Ground Fault Detection Implementation at Hibbard Renewable Energy Center. 598 N. Buth Rd 3215 Arrowhead Rd
100% Stator Ground Fault Detection Implementation at Hibbard Renewable Energy Center Introduction Roger Hedding Steven Schoenherr, P.E. ABB Inc. Minnesota Power 598 N. Buth Rd 3215 Arrowhead Rd Dousman,
FFI. Advances in Medium and Low Voltage Power Distribution ESS Metron Expo and Technical Seminars. Presented By: Greg Pelster & Robert Schmid
Advances in Medium and Low Voltage Power Distribution ESS Metron Expo and Technical Seminars Presented By: Greg Pelster & Robert Schmid FFI Ferrie, Franzmann Industries LOW VOLTAGE SWITCHGEAR & LOW VOLTAGE
TDMS Test & Data Management Software
Test & Data Management Software TDMS protective relays energy meters transducers power quality CT-VT-PT transformers ground grid circuit breakers batteries surge arresters The Integrated Testing Solution
SmartPro 230V 750VA 500W Line-Interactive Sine Wave UPS, SNMP, Webcard, Tower, USB, DB9 Serial
SmartPro 230V 750VA 500W Line-Interactive Sine Wave UPS, SNMP, Webcard, Tower, USB, DB9 Serial MODEL NUMBER: SMX750SLT Highlights 750VA line interactive tower UPS; Sine wave output 220/230/240V nominal
Data Bulletin. Choosing a Trip Unit for PowerPact H-, J-, and L-Frame Circuit Breakers. Introduction. Thermal-Magnetic or Electronic Trip Unit?
Data Bulletin 011DB110 07/01 Choosing a Trip Unit for PowerPact H-, J-, and L-Frame Circuit Breakers ENGLISH Inoduction Thermal-Magnetic or Eleconic Trip Unit? Thermal-Magnetic Trip Units 01171 t 0119
Energy Depot GmbH PRODUCT AND APPLICATION GUIDE. Total Monitoring Solution for PV. Delivering Solutions for Energy Management
Energy Depot GmbH Delivering Solutions for Energy Management PRODUCT AND APPLICATION GUIDE Total Monitoring Solution for PV SOLAR LOGGER & ANALYSIS DC STRING MONITORING Residential Comprehensive Solar
GE Digital Energy. TLE Series UPS. 160-400 kw three phase 400 Vac. with best-in-class efficiency. gimagination at work
GE Digital Energy TLE Series UPS 160-400 kw three phase 400 Vac with best-in-class efficiency gimagination at work GE provides clean, efficient and reliable power for today s digital world with the ultra