Submersible pumps Grundfos With top exit Mop sump pomps Simer en City With top exit Submersible pumps Homa Submersible pumps DAB

Size: px

Start display at page:

Download "Submersible pumps Grundfos With top exit Mop sump pomps Simer en City With top exit Submersible pumps Homa Submersible pumps DAB"

Cameron Webster
7 years ago
Views:

Submersible pumps Grundfos With top exit Mop sump pomps Simer en City With top exit Submersible pumps Homa Submersible pumps DAB Grunfos KP sump pump completely made of stainless steel.

1 Submersible pumps Grundfos With top exit Mop sump pomps Simer en City With top exit Submersible pumps Homa Submersible pumps DAB Grunfos KP sump pump completely made of stainless steel.. Very effective for marine, construction and industry. Ideal as ballast pump. Pump is completely immersible, open impeller, special liquid filled motor. Thermical protection only with the 230 volt types. Without motor safety switch no guarantee, certainly not with the 400 volt. Shaftseal: lipseal made of NBR rubber. Maximum head 10 meter. Made of Stainless steel 304. for light polluted water and water with a little higher acid value and that with a permanent temperature of 50 degrees C. Voltages 230V 50Hz. Serie KP 150 free rate liter per hour, at 5 meter 250 liter per hour. Maximum rate 5,2 mtr. Pumps till 10 mm (only without floater), connection 1 1/4 female thread. Weight 6,3 kilo. 1,3 Amp. Shaft capacity 0,15Kw, 0,2Pk. With 10 meter neoprene cable with 3 pole plug KP V KP150.AV1 230V + vertical float KP150.A1 230V + ball float Serie KP 250 free rate liter per hour, at 5 meter 6200 liter per hour. Maximum rate 7,5 mtr. Pumps till 10 mm (only without floater), connection 1 1/4 female thread. Weight 7,2 kilo. 2,3 Amp. Shaft capacity 0,24Kw, 032Pk. With 10 meter neoprene cable with 3 pole plug KP V KP250.AV1 230V + vertical float KP250.A1 230V + ball float Serie KP 350 free rate liter per hour, at 5 meter 9000 liter per hour. Maximum rate 9,0 mtr. Pumps till 10 mm (only without floater), connection 1 1/4 female thread. Weight 7,5 kilo. 4,0 Amp. Shaft capacity 0,37Kw, 05Pk. With 10 meter neoprene cable with 3 pole plug KP V KP350.AV1 230V + vertical float KP350.A1 230V + ball flaot Pag. 59/02

2 Grunfos AP12 sump pump completely made of stainless steel.. Very effective for marine, construction and industry. Ideal as ballast pump. Pump is completely immersible, open impeller, oil filled motor (non-toxic). Thermical protection only with the 230 volt types. Without motor safety switch no guarantee, certainly not with the 400 volt. Shaftseal: mecanical seal made of carbon on ceramic lipseal of NBR rubber. Maximum head 10 meter. for light polluted water and water with a little higher acid value and that with a permanent temperature of 55 degrees C. Voltages 230V 50Hz. Made of Stainless steel 304. Serie AP12-04 free rate liter per hour, at 5 meter liter per hour. Maximum rate 9,5 mtr. Pumps till 30 mm (only without floater), connection 1 1/2 female thread. Weight 10 kilo. Shaft capacity 0,7Kw, 09Pk. With 10 meter neoprene cable with 3 pole plug. Maximum particle to pump 12 mm no sand or gravel. At 230V 3,1Amp and at 400V 1,3amp AP V AP V Serie AP12-06 free rate liter per hour, at 5 meter liter per hour. Maximum rate 12,7 mtr. Pumps till 30 mm (only without floater), connection 1 1/2 female thread. Weight 11 kilo. Shaft capacity 0,94Kw, 1,25Pk. With 10 meter neopreene cable with 3 pole plug. Maximum particle to pump 12 mm no sand or gravel. At 230V 4,4Amp and at 400V 1,6amp AP V AP V Serie AP12-08 free rate liter per hour, at 5 meter liter per hour. Maximum rate 14,4 mtr. Pumps till 30 mm (only without floater), connection 1 1/2 female thread. Weight 12,6 kilo. Shaft capacity 1,27Kw, 1,7Pk. With 10 meter neoprene cable with 3 pole plug. Maximum particle to pump 12 mm no sand or gravel. At 230V 5,9Amp and at 400V 2,1amp AP V AP V Serie AP12-11 free rate liter per hour, at 5 meter liter per hour. Maximum rate 16,6 mtr. Pumps till 30 mm (only without floater), connection 1 1/2 female thread. Weight 15,1 kilo. Shaft capacity 1,6Kw, 2,1Pk. With 10 meter neoprene cable with 3 pole plug. Maximum particle to pump 12 mm no sand or gravel. At 230V 8,0Amp and at 400V 3,0amp AP V AP V

3 City speed mop sump pump. Very effective absorbing to a very low level, after running dry the pump is running again very easy and fast. Pump is completely immersible, open impeller. Thermical protection built in. Dry motor. Maximum head 3,0 mtr. Shaftseal: double mecanical seal made of carbon on ceramic and lipseal separate by oil chamber. Impeller made of Noryl, housing made of plastic. Pumpshaft made of stainless steel EN For clean and light polluted water with a maximum temperature of +40 degrees C. 230v 50Hz. Speedmop 30M free rate 7200 liter per hour, at 5 meter 2400 liter per hour. Maximum rate 7,0 meter. Pumps till 2 mm. Maximum particle to pump 2,0 mm no sand. Connection 1" hose and 1" male thread. Weight 4 kilo. 230V 1,3Amp. Shaft cap. 0,25Kw, 0,33Pk. Will be supplied with 10 meter neoprene cable H05-RN-F with standard rubber plug Speedmop 30M 230V V Speedmop 30MV 230V with float switch Speedmop 30M free rate 9000 liter per hour, at 5 meter 4800 liter per hour. Maximum rate 9,0 meter. Pumps till 2 mm. Maximum particle to pump 2,0 mm no sand. Connection 1 1/4" hose and 1 1/4" male thread. Weight 5 kilo. 230V 2,0Amp. Shaft cap. 0,37Kw, 0,5Pk. Will be supplied with 10 meter neoprene cable H05-RN-F with standard rubber plug Speedmop 50M 230V V Speedmop 50MV 230V with float switch Simer Classic sump pump. The well known sump pump that absorbs floorcloth dry till 3 mm, after running dry the pump is running again very easy and fast because of the built in de-aerater. Ideal pump for marine and industry. Pump is completely immersible, open impeller. Thermical protection built in. Oil filled motor. Mechanische seal van keramiek op carbon. Impeller and housing made of aluminium with a epoxy coating. Pumpshaft made of stainless steel. For clean and light polluted water. 230V 50Hz. Simer Classic free rate 4800 liter per hour, at 5 meter 800 liter per hour. Maximum rate 6,0 meter. Pumps till 3 mm. Maximum particle to pump 2,5 mm no sand. Connection 1" hose and 1 1/4" female thread. Weight 4 kilo. 230V 3,5Amp. Shaft cap. 0,12Kw, 0,16Pk. Will be supplied with 10 meter neoprene cable H07-RN-F with standard rubber plug Simer Classic 230V

4 Homa submersible pumps Stainless steel sump pump with cooling jacket for clean and dirty water. Connection pressure side R 1 1/4" female Impeller: Vortex Free entry Ø20 mm. Motor speed 2900 rpm Material: housing, impeller and suction mesh of stainless steel. Voltage 230V 1 ph, 0,45 Kw Complete with 10 meter cable and plug. Performance max. 7,3 mtr Qmax. 11,5 m³/h Weight 7,0 kilo CR360VW without float CR360VW A with float switch Series H500 Wear resisted sump pump with cooling jacket for dirty-, clean- and leakage water. Connection pressure side R 2 1/2" - R6" Impeller: open multi-channel impeller Free entry Ø8 - Ø18 mm Motor speed 2900 rpm Materials: housing of aluminium or cast iron, impeller of cast iron or hard casting. Voltage 400V 3 ph A: with automatic float switch AT: with automatic float switch and special thermal motor protection. Complete with 20 meter cable and power controlbox, storz coupling H500B/2,5D Performance max 19,5 meter Qmax. 51,8 m³/h 2,0 Kw Weight 49 kilo A H500B/2,5DA Performance max 19,5 meter Qmax. 51,8 m³/h 2,0 Kw Gewicht 49 kilo Vrije doorlaat Ø10 mm H500B/3,5D Opvoerhoogte max 24,0 meter A H500B/3,5DA AT H500B/3,5DA T H500B/5,5D Qmax. 120 m³/h 4,6 Kw Weight 66 kilo A H500B/5,5DA Qmax. 120 m³/h 4,6 Kw Weight 66 kilo Top Pag. 59/01

5 Homa submersible waist water pumps series TP53 Specially for waist water and dirty water. Available in performance from 9,5 till 30,0 meter Qmax van 42,0 tot 81,9 m³/h Connection pressure side 3" male thread Impeller: Single channel impeller or Vortex impeller Free entry from Ø50 mm till Ø65 mm Motor speed at 230V 1 ph 2900 rpm and with 400V 3 ph 1450 rpm Materials housing and impeller: cast iron. Also available with automatic flaot level switch All models available with Ex II 2G Eex (ib) IIB T4 motor Supplied with 10 meter cable without plug Model A with power control box with plug. On request Homa waist water submersible pumps series TP70 For sewage and effluent. Available in performance from 6,2 till 23,7 meter Qmax van 55,0 tot 125,0 m³/uur Pressure connection 3" male thread / DN80 Impeller: Single channel impeller or Vortex impeller Free entry Ø70 mm Motor speed 230V 1 ph 2900 rpm and with 400V 3 ph 1450 rpm Materials housing and impeller: cast iron. Also available with automatic flaot level switch All models available with Ex II 2G Eex (ib) IIB T4 motor Supplied with 10 meter cable without plug Model A with power control box with plug. On request Dab dsubmersible pumps Series Drenag , Feka and Grinder Type Drenag for water with sand, mud water at construction sites, light poluted water, rain water, ground water, clean water, water from lakes or rivers, not aggressive water. For Feka and Grinder ground water, sewage water, dirty water with particles and/or fobres which are not aggressive Max. performance 10 meter Drenag 1400 M Drenag 1800 T Feka 1400 M Feka 1800 T Grinder 1400 M Grinder 1800 T Dab Drenag Dab Feka Dab Grinder

Series description: Wilo-Drain TC 40

Series description: Wilo-Drain TC 40 H[m] Wilo-Drain TC 40 10 8 6 4 2 TC 40/8 TC 40/10 0 0 2 4 6 8 10 12 14 Q[m³/h] Design Submersible sewage pump Application Pumping heavily contaminated fluids for House/site