Submersible Motor Pump. Amarex N. 50 Hz DN 50 - DN 100. Type Series Booklet
|
|
|
- Christopher Snow
- 8 years ago
- Views:
Transcription
1 Amarex N Hz DN - DN 100 Type Series Booklet
2 Legal information/copyright Type Series Booklet Amarex N All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any other purpose, nor otherwise transmitted, published or made available to a third party without the manufacturer's express written consent. Subject to technical modification without prior notice. KSB Aktiengesellschaft, Frankenthal.05.13
3 Contents Contents Waste Water Amarex N... 4 Main applications... 4 Fluids handled... 4 Operating data...4 Designation... 4 Design details... 4 Materials...5 Product benefits... 5 Certifications... 5 Product overview / selection tables... 6 Table of fluids handled...6 Overview of product features... 8 Material variants Technical data Characteristic curves...14 n = 2900 rpm n = 14 rpm Dimensions and connections...24 Connections Dimensions...25 Installation types...37 Notes on installation Suggested installation layouts for transportable pump sets Suggested installation layouts for stationary pump sets...39 Suggested electrical installation layouts...41 Scope of supply Accessories... Installation parts for stationary pump sets... Installation parts for transportable pump sets...43 Chain for stationary and transportable pump sets Accessories for stationary and transportable pump sets Electrical accessories
4 Waste Water Amarex N Main applications Waste water management Drainage systems Sewage treatment plants Sludge disposal Drainage of rooms and areas at risk of flooding on municipal, commercial and industrial premises Fluids handled Service water Grey water Waste water with faeces Waste water containing long fibres and solid substances Fluids containing gas Activated sludge Digested sludge Raw sludge Operating data Operating properties Characteristic Value Flow rate Q Up to 190 m 3 /h (53 l/s) Head H Up to 49 m Fluid temperature t Up to +40 C 1) Characteristic Value Motor rating P kw to 4.2 kw Enclosure IP 68 to EN / IEC 529 Designation Example: Amarex N F 80-2 / 04 4 YL G-2 Key to the designation Code Amarex N F Description Type series Impeller type F Free-flow impeller S Cutter D Open, diagonal single-channel impeller 80-2 Size of hydraulic system 04 Motor size 4 Number of motor poles 2 2-pole 4 4-pole YL Motor version UL Without explosion protection, for fluid temperatures of up to 55 C YL 2) With explosion protection, for fluid temperatures of up to 40 C WL Without explosion protection, for fluid temperatures of up to 60 C G Material variant ( Page 10) G Pump casing: grey cast iron JL1040 Intermediate casing: grey cast iron JL 1040 Impeller: grey cast iron JL 1040 G1 Pump casing: grey cast iron JL1040 Intermediate casing: grey cast iron JL 1040 Impeller: Noridur (duplex stainless steel) G2 Pump casing: grey cast iron JL1040 Intermediate casing: grey cast iron JL 1040 Impeller: Norihard (white cast iron) GH Pump casing: grey cast iron JL1040 Intermediate casing: Norihard (white cast iron) Impeller: Norihard (white cast iron) 2 Nominal impeller diameter [mm] Design details Design Fully floodable submersible motor pump Not self-priming Close-coupled pump set Shaft seal Two bi-directional mechanical seals in tandem arrangement, with liquid reservoir Impeller types Various, application-based impeller types 1) For short periods (3 to 5 minutes or until the temperature guards trip) UL and WL models can be operated at up to 80 C. 2) In countries stipulating explosion-proof units for handling sewage with faeces, motor version YL must be used. 4 Amarex N
5 D impeller F impeller Open, diagonal single-vane impeller (impeller type D) Free-flow impeller (impeller type F) Suitable for the following fluids: fluids containing solid substances and long fibres Suitable for the following fluids: fluids containing solids and stringy material as well as fluids with entrapped air or gas D and F impellers are suitable for handling the following fluids: Activated sludge Digested sludge Heating sludge Mixed water Raw waste water Raw sludge Recirculated sludge S impeller Impeller with cutter (impeller type S) Suitable for the following fluids: faeces, domestic sewage and waste water containing long fibres S impellers are suitable for handling the following fluids: Domestic waste water Grey water Waste water with faeces Standard bearings Grease-lubricated bearings sealed for life Maintenance-free Reinforced bearings (optional, only for S impeller) The following hydraulic system/motor combinations can be equipped with reinforced bearings: Reinforced bearings Size of hydraulic system Amarex N S -172 (motor version YL) Amarex N S -222 (motor version YL) Pump-end bearings: Drive Motor size and number of poles 002, 012, , 0 Grease-lubricated bearing sealed for life Three-phase asynchronous squirrel-cage motor Explosion-proof pump sets comply with Ex dc IIB type of protection. Materials Overview of available materials Component Material Casing JL 1040 Intermediate casing JL 1040 Impeller JL ) Cutter (only Amarex N S) 1.80 (K100) Shaft Mechanical seal (motor end) Carbon/Al 2 O 3 Mechanical seal (pump end) SiC/SiC Screws/bolts A2 Sealing elements NBR Product benefits Easy and fast installation/removal with polarised, absolutely watertight cable and KSB plug connection ensuring correct installation Motor absolutely watertight, also in the event of damage to the cable sheath, with individually stripped, tinned and resin-sealed conductors Highest operating reliability with optimum motor selection for operating mode S1, thermal class F, explosion-proof variant in Ex d IIB T4 Gb Long service life with shaft made of corrosion-resistant stainless steel Zero maintenance, ideal for continuous duty, with longlife bearings sealed on both sides, grease-packed for life Environmentally friendly, non-toxic, food-approved oil Significant reduction of energy costs by optimised hydraulic system and high efficiency Absolutely reliable and non-clogging design with optimised cutter (S impeller). No risk of leakage with close-coupled pump design Stationary pump sets easy to install and remove with automatic, bolt-free connection; leakage prevented by elastic sealing elements Ease of service with wetted bolts made of stainless steel, which are easy to undo even after years of operation Two bi-directional mechanical seals with oil reservoir filled with ecologically acceptable oil provide double safety Well suited for mechanical seal with covered spring for abrasive and aggressive fluids Only one set of spare parts for all pump sizes thanks to modular system Certifications Label Effective in: Note Europe Suitable for plants to Standard EN 1-1 Europe Amarex N DN - DN 100 BMW (test report) Nos.: to 05 3) Amarex N F /65/80/100 in material variant G1 = (Noridur), G2 = (Norihard) Amarex N 5
6 Product overview / selection tables Table of fluids handled The table below for your guidance is based on KSB's longstanding experience. The data are standard values and are not to be considered as generally binding recommendations. More detailed advice is available from our specialist department. Make use of our laboratory's wealth of experience when selecting materials. Selection aid for materials and hydraulic systems per fluid Fluid handled 4) Recommen ded material Recomm ended impeller type 5) Comments, further recommendations Grey water JL 1040 F, D, S Free passage > any solids contained, possibly pre-screened River water JL 1040 F, D Free passage > any solids contained, possibly pre-screened Contaminated surface water JL 1040 F, D Free passage > any solids contained, possibly pre-screened Waste water Untreated municipal waste water JL 1040 F, D, S ATV 6) recommends a free passage of 100 mm; min. free passage: 76 mm Waste water containing air JL 1040 F Up to 8 %, contact KSB for handling fluids with high outgassing rates or gas Raw waste water JL 1040 F, D ATV 6) recommends a free passage of 100 mm; min. free passage: 76 mm Mixed water JL 1040 F Free passage > any solids contained, possibly pre-screened Waste water or grey water containing long fibres JL 1040 F, D, S Free passage > any solids contained, possibly pre-screened Highly abrasive waste water causing wear (chemically neutral) Norihard F For solids contents < 5 g/l material variants G2, GH Corrosive waste water Noridur F Material variant G1 if required according to analysis of the fluid handled Sludge Raw sludge JL 1040 D, F Pumpable up to a dry substance content of: 13 % (D), 8 % (F) Digested sludge JL 1040 D, F Pumpable up to a dry substance content of: 13 % (D), 8 % (F) Activated sludge JL 1040 D, F Pumpable up to a dry substance content of: 13 % (D), 8 % (F) Industrial waste water containing... Paint suspensions JL 1040 F Solvent-free, observe the operator's instructions! Lacquer/paint/varnish JL 1040 F Solvent-free, contact KSB for silicone-free version suspensions Fibres/pulp JL 1040 F, D, S Chips/swarf Norihard F Material variant G2 or GH, special mechanical seal; solids content < 5 g/l Abrasive substances 7) Norihard F Material variant G2 or GH, special mechanical seal; solids content < 5 g/l Mildly acidic industrial waste JL 1040 F ph value 6.5: G1 variant and FPM (Viton) O-rings water Non-corrosive waste water Ammonium hydroxide JL 1040 F Ammonium hydroxide 5 % JL 1040 F NH 4 OH Urea 25 % (NH 2 ) 2 -CO JL 1040 F Potassium hydroxide 10 % JL 1040 F KOH Calcium hydroxide 5 % JL 1040 F Ca(OH) 2 Sodium hydroxide 5 % NaOH JL 1040 F Sodium carbonate % Na 2 CO 3 JL 1040 F 4) For any fluids which are not listed in this table contact KSB. 5) The first impeller type listed should be given preference. 6) ATV = German regulatory body for waste water management 7) Severe hydroabrasive wear occurs if solids contents of approx. 0.5 g/l or higher are combined with circumferential speeds exceeding m/s or low-flow conditions to the left of the duty point. 6 Amarex N
7 Fluid handled 4) Recommen ded material Recomm ended impeller type 5) Comments, further recommendations Non-corrosive waste water containing... Aliphatic hydrocarbons, e.g. oils, petrol, butane, methane JL 1040 F FPM (Viton) O-rings, TEHSITE cable, for high concentrations contact KSB. Aromatic hydrocarbons, e.g. benzene, styrene JL 1040 F FPM (Viton) O-rings, TEHSITE cable, for high concentrations contact KSB. Chlorinated hydrocarbons (e.g. tetrachloroethylene, JL 1040 F FPM (Viton) O-rings, TEHSITE cable, for high concentrations contact KSB. ethylene chloride, chloroform, methylene chloride) Highly abrasive industrial waste water causing wear (chemically neutral) 8) Lime water Norihard F For sinter contents < 5 g/l, material variant GH Lime milk containing quartz Norihard F Lime milk of up to 15 %, material variant GH and pigment suspension Water/sand mixture Norihard F Up to 5 g/l solids content, material variant GH 4) For any fluids which are not listed in this table contact KSB. 5) The first impeller type listed should be given preference. 8) The material variants required highly depend on the operating hours, rotational speed and flow velocity. Amarex N 7
8 Overview of product features Standard designs Size S impeller D impeller F impeller Amarex N S -... Amarex N D Amarex N D Amarex N F -... Amarex N F Amarex N F Amarex N F Material variant G G G Number of motor poles 2-pole -172/ /... 4-pole / / /... -2/ /... Explosion protection Motor version UL Non-explosionproof Motor version YL 9) Ex d IIB T4 Gb Motor version WL Non-explosionproof Motor Starting method DOL 10) Voltage 400 V Cooling Cooled by surrounding fluid Mode of operation S1: submerged (max. 25 m) (see 2) in outline drawing) S3: outside the fluid (see 1) in outline drawing) Power cable Type Rubber-sheathed cable (H07RN8-F 7G1.5²) Length 10 m Cable entry Absolutely watertight Sealing elements Shaft seal Mechanical seal Elastomer seals NBR Monitoring equipment Winding temperature version YL Winding temperature version UL, WL Coating 65-2/ / /... Temperature monitoring circuit (with automatic reset and start-up): bimetal switch directly connected with the control circuit of the motor contactor Limiting circuit (temperature limit for explosion protection without automatic reset): bimetal switch connected via a tripping unit with manual reset Temperature monitoring circuit (with automatic reset and start-up): bimetal switch directly connected with the control circuit of the motor Environmentally-friendly KSB top coat (two-component epoxy paint), colour RAL 02, film thickness = 80 µm Installation ( Page 37) Stationary, with guide hoop Installation depths 1.5 m/1.8 m/2.1 m Stationary, with single guide rail Installation depth 4.5 m Stationary, with twin guide rail Installation depth 4.5 m Stationary, with guide wire Installation depth 4.5 m Transportable Installation depth 4.5 m Maximum temperature of fluid handled Motor version UL 55 C Motor version YL 40 C Motor version WL 60 C 9) In countries stipulating explosion-proof units for handling sewage with faeces, motor version YL must be used. 10) Maximum switching frequency: starts per hour 8 Amarex N
9 Standard variants Size S impeller D impeller F impeller Amarex N S -172/... Amarex N S -222/... Amarex N D 80-2/... Amarex N D 100-2/... Amarex N F -... Amarex N F Amarex N F Amarex N F Material variants G G G1 G2 GH Number of motor poles 2-pole /... -2/ /... 4-pole / / /... Shaft material Material C45 N Motor Voltage 2 V, 415 V, 0 V, 690 V Monitoring equipment Leakage sensor in the motor space 11) Suction flange Drilled to DIN/ISO PN16 or ASME lb Sealing elements Elastomers: O-rings and flange gaskets made of Viton, lower mechanical seal with Viton gaskets Shaft seal: special mechanical seal (mechanical seal with covered spring HJ977) 12) Power cables Standard rubber-sheathed cable (H07RN8-F 7G1.5 2 ); for versions ULG, YLG, WLG 13) Standard rubber-sheathed cable (H07RN8-F 8x1.5 2 ) for pump with leakage sensor 13) TEHSITE power cable (8G1.5) for pump with or without leakage sensor, for versions ULG, YLG, WLG 14) Shielded rubber-sheathed cable (S07RC4N8-F-8G1.5) for pump with or without leakage sensor, for versions ULG, YLG, WLG operated with a frequency inverter 14) Coating Environmentally-friendly KSB standard coating (two-component epoxy paint), colour RAL 02, film thickness = 0 µm Installation ( Page 37) Stationary, with guide hoop Installation depths 1.5 m/1.8 m/2.1 m Stationary, with single guide rail Installation depth 6.0 m Stationary, with twin guide rail Installation depth 6.0 m Stationary, with guide wire Installation depth 9.5 m Transportable Installation depth 4.5 m 11) 8-core connection cable required 12) Silicon carbide/silicon carbide seal faces, Viton sealing elements, stainless steel spring and metal part, Viton (FPM) O-rings and flange gaskets 13) Total lengths available 15 m/ m/ m/40 m/ m 14) Total lengths available 10 m/15 m/ m/ m/40 m/ m Amarex N 9
10 Material variants Overview of material variants for standard models Component S impeller D impeller F impeller Amarex N S -172/... Amarex N S -222/... Amarex N D 80-2/... Amarex N D 100-2/... Amarex N F -... Amarex N F Amarex N F Amarex N F G G G Casing JL 1040 JL 1040 JL 1040 Intermediate casing JL 1040 JL 1040 JL 1040 Impeller JL 1040 JL 1040 JL 1040 Cutter (K100) - - Shaft Mechanical seal Drive end Carbon/Al 2 O 3 Carbon/Al 2 O 3 Carbon/Al 2 O 3 Pump end SiC/SiC SiC/SiC SiC/SiC Screws/bolts A2 A2 A2 Elastomer seals NBR NBR NBR Overview of material variants for standard models Component S impeller D impeller F impeller Amarex N S -172/... Amarex N S -222/... Amarex N D 80-2/... Amarex N D 100-2/... Amarex N F -... Amarex N F Amarex N F Amarex N F G G G1 G2 GH Casing - - JL 1040 JL 1040 JL 1040 Intermediate casing - - JL 1040 JL ) Impeller ) ) ) Cutter Shaft Mechanical seal Drive end - - Carbon/Al 2 O 3 Carbon/Al 2 O 3 Carbon/Al 2 O 3 Pump end - - SiC/SiC SiC/SiC SiC/SiC Screws/bolts - - A2 A2 A2 Elastomer seals - - NBR 17) NBR 17) NBR 17) 15) Noridur (= duplex stainless steel) 16) Norihard (= white cast iron) 17) Optional: FPM 10 Amarex N
11 Technical data Impeller diameter Size Motor version P 1 P 2 I N I A Fluid temperature [kg] Mat. No. [kw] [kw] [A] [A] [ C] 1 S -172/002 LG-1 ULG 1,75 1, 3, S -172/002 LG-1 YLG 1,75 1, 3, S -172/002 LG-1 WLG 1,75 1, 3, S -172/002 LG-140 ULG 1,75 1, 3, S -172/002 LG-140 YLG 1,75 1, 3, S -172/002 LG-140 WLG 1,75 1, 3, S -172/012 LG-160 ULG 2,60 1,90 4, S -172/012 LG-160 YLG 2,60 1,90 4, S -172/002 LG-160 WLG 2,60 1,90 4, S -222/032 LG-175 ULG 4,00 3,10 7, S -222/032 LG-175 YLG 4,00 3,10 7, S -222/032 LG-175 WLG 4,00 3,10 7, S -222/0 LG-190 ULG 5, 4, 8, S -222/0 LG-190 YLG 5, 4, 8, S -222/0 LG-190 WLG 5, 4, 8, F -170/002 LG-90 ULG 1,75 1, 3, F -170/002 LG-90 YLG 1,75 1, 3, F -170/002 LG-90 WLG 1,75 1, 3, F -170/002 LG-107 ULG 1,75 1, 3, F -170/002 LG-107 YLG 1,75 1, 3, F -170/002 LG-107 WLG 1,75 1, 3, F -170/012 LG-1 ULG 2,60 1,90 4, F -170/012 LG-1 YLG 2,60 1,90 4, F -170/012 LG-1 WLG 2,60 1,90 4, 60 1 F -170/022 LG-1 ULG 3,06 2, 5, F -170/022 LG-1 YLG 3,06 2, 5, F -170/022 LG-1 WLG 3,06 2, 5, F -170/022 LG-140 ULG 3,06 2, 5, F -170/022 LG-140 YLG 3,06 2, 5, F -170/022 LG-140 WLG 3,06 2, 5, F -2/032 LG-1 ULG 4,00 3,10 7, F -2/032 LG-1 YLG 4,00 3,10 7, F -2/032 LG-1 WLG 4,00 3,10 7, F -2/032 LG-140 ULG 4,00 3,10 7, F -2/032 LG-140 YLG 4,00 3,10 7, F -2/032 LG-140 WLG 4,00 3,10 7, F -2/0 LG-1 ULG 5, 4, 8, F -2/0 LG-1 YLG 5, 4, 8, F -2/0 LG-1 WLG 5, 4, 8, F -2/0 LG-160 ULG 5, 4, 8, F -2/0 LG-160 YLG 5, 4, 8, F -2/0 LG-160 WLG 5, 4, 8, F -2/0 LG-170 ULG 5, 4, 8, F -2/0 LG-170 YLG 5, 4, 8, F -2/0 LG-170 WLG 5, 4, 8, F -2/0 LG-180 ULG 5, 4, 8, F -2/0 LG-180 YLG 5, 4, 8, F -2/0 LG-180 WLG 5, 4, 8, F /032 LG-1 ULG 4,00 3,10 7, F /032 LG-1 YLG 4,00 3,10 7, F /032 LG-1 WLG 4,00 3,10 7, F /032 LG-128 ULG 4,00 3,10 7, F /032 LG-128 YLG 4,00 3,10 7, F /032 LG-128 WLG 4,00 3,10 7, F /032 LG-136 ULG 4,00 3,10 7, F /032 LG-136 YLG 4,00 3,10 7, F /032 LG-136 WLG 4,00 3,10 7, F /0 LG-146 ULG 5, 4, 8, Amarex N 11
12 Impeller diameter Size Motor version P 1 P 2 I N I A Fluid temperature [kg] Mat. No. [kw] [kw] [A] [A] [ C] F /0 LG-146 YLG 5, 4, 8, F /0 LG-146 WLG 5, 4, 8, F /0 LG-152 ULG 5, 4, 8, F /0 LG-152 YLG 5, 4, 8, F /0 LG-152 WLG 5, 4, 8, F /0 LG-158 ULG 5, 4, 8, F /0 LG-158 YLG 5, 4, 8, F /0 LG-158 WLG 5, 4, 8, F 65-2/004 LG-112 ULG 1,23 0,80 2,75 17, F 65-2/004 LG-112 YLG 1,23 0,80 2,75 17, F 65-2/004 LG-112 WLG 1,23 0,80 2,75 17, F 65-2/004 LG-125 ULG 1,23 0,80 2,75 17, F 65-2/004 LG-125 YLG 1,23 0,80 2,75 17, F 65-2/004 LG-125 WLG 1,23 0,80 2,75 17, F 65-2/004 LG-135 ULG 1,23 0,80 2,75 17, F 65-2/004 LG-135 YLG 1,23 0,80 2,75 17, F 65-2/004 LG-135 WLG 1,23 0,80 2,75 17, F 65-2/004 LG-145 ULG 1,23 0,80 2,75 17, F 65-2/004 LG-145 YLG 1,23 0,80 2,75 17, F 65-2/004 LG-145 WLG 1,23 0,80 2,75 17, F 65-2/004 LG-155 ULG 1,23 0,80 2,75 17, F 65-2/004 LG-155 YLG 1,23 0,80 2,75 17, F 65-2/004 LG-155 WLG 1,23 0,80 2,75 17, F 65-2/014 LG-165 ULG 1,94 1, 3,54 17, F 65-2/014 LG-165 YLG 1,94 1, 3,54 17, F 65-2/014 LG-165 WLG 1,94 1, 3,54 17, F 65-2/014 LG-175 ULG 1,94 1, 3,54 17, F 65-2/014 LG-175 YLG 1,94 1, 3,54 17, F 65-2/014 LG-175 WLG 1,94 1, 3,54 17, F 65-2/024 LG-185 ULG 2,56 1,80 4,25 17, F 65-2/024 LG-185 YLG 2,56 1,80 4,25 17, F 65-2/024 LG-185 WLG 2,56 1,80 4,25 17, F 65-2/024 LG-195 ULG 2,56 1,80 4,25 17, F 65-2/024 LG-195 YLG 2,56 1,80 4,25 17, F 65-2/024 LG-195 WLG 2,56 1,80 4,25 17, F 80-2/034 LG-1 ULG 2,60 1,90 5,87 37, F 80-2/034 LG-1 YLG 2,60 1,90 5,87 37, F 80-2/034 LG-1 WLG 2,60 1,90 5,87 37, F 80-2/034 LG-135 ULG 2,60 1,90 5,87 37, F 80-2/034 LG-135 YLG 2,60 1,90 5,87 37, F 80-2/034 LG-135 WLG 2,60 1,90 5,87 37, F 80-2/034 LG-1 ULG 2,60 1,90 5,87 37, F 80-2/034 LG-1 YLG 2,60 1,90 5,87 37, F 80-2/034 LG-1 WLG 2,60 1,90 5,87 37, F 80-2/034 LG-165 ULG 3, 2,60 6, 37, F 80-2/034 LG-165 YLG 3, 2,60 6, 37, F 80-2/034 LG-165 WLG 3, 2,60 6, 37, F 80-2/044 LG-180 ULG 5,13 3,70 8,40 37, F 80-2/044 LG-180 YLG 5,13 3,70 8,40 37, F 80-2/044 LG-180 WLG 5,13 3,70 8,40 37, F 80-2/044 LG-195 ULG 5,13 3,70 8,40 37, F 80-2/044 LG-195 YLG 5,13 3,70 8,40 37, F 80-2/044 LG-195 WLG 5,13 3,70 8,40 37, F 80-2/044 LG-210 ULG 5,13 3,70 8,40 37, F 80-2/044 LG-210 YLG 5,13 3,70 8,40 37, F 80-2/044 LG-210 WLG 5,13 3,70 8,40 37, F 100-2/034 LG-1 ULG 2,60 1,90 5,87 37, F 100-2/034 LG-1 YLG 2,60 1,90 5,87 37, F 100-2/034 LG-1 WLG 2,60 1,90 5,87 37, Amarex N
13 Impeller diameter Size Motor version P 1 P 2 I N I A Fluid temperature [kg] Mat. No. [kw] [kw] [A] [A] [ C] 135 F 100-2/034 LG-135 ULG 2,60 1,90 5,87 37, F 100-2/034 LG-135 YLG 2,60 1,90 5,87 37, F 100-2/034 LG-135 WLG 2,60 1,90 5,87 37, F 100-2/034 LG-1 ULG 3, 2,60 6, 37, F 100-2/034 LG-1 YLG 3, 2,60 6, 37, F 100-2/034 LG-1 WLG 3, 2,60 6, 37, F 100-2/044 LG-165 ULG 5,13 3,70 8,40 37, F 100-2/044 LG-165 YLG 5,13 3,70 8,40 37, F 100-2/044 LG-165 WLG 5,13 3,70 8,40 37, F 100-2/044 LG-180 ULG 5,13 3,70 8,40 37, F 100-2/044 LG-180 YLG 5,13 3,70 8,40 37, F 100-2/044 LG-180 WLG 5,13 3,70 8,40 37, F 100-2/044 LG-195 ULG 5,13 3,70 8,40 37, F 100-2/044 LG-195 YLG 5,13 3,70 8,40 37, F 100-2/044 LG-195 WLG 5,13 3,70 8,40 37, F 100-2/044 LG-210 ULG 5,13 3,70 8,40 37, F 100-2/044 LG-210 YLG 5,13 3,70 8,40 37, F 100-2/044 LG-210 WLG 5,13 3,70 8,40 37, D 80-2/034 LG-154 ULG 2,60 1,90 5,87 37, D 80-2/034 LG-154 YLG 2,60 1,90 5,87 37, D 80-2/034 LG-154 WLG 2,60 1,90 5,87 37, D 80-2/034 LG-168 ULG 2,60 1,90 5,87 37, D 80-2/034 LG-168 YLG 2,60 1,90 5,87 37, D 80-2/034 LG-168 WLG 2,60 1,90 5,87 37, D 80-2/034 LG-180 ULG 2,60 1,90 5,87 37, D 80-2/034 LG-180 YLG 2,60 1,90 5,87 37, D 80-2/034 LG-180 WLG 2,60 1,90 5,87 37, D 80-2/034 LG-190 ULG 2,60 1,90 5,87 37, D 80-2/034 LG-190 YLG 2,60 1,90 5,87 37, D 80-2/034 LG-190 WLG 2,60 1,90 5,87 37, D 100-2/034 LG-195 ULG 3, 2,60 6, 37, D 100-2/034 LG-195 YLG 3, 2,60 6, 37, D 100-2/034 LG-195 WLG 3, 2,60 6, 37, D 100-2/044 LG-9 ULG 5,13 3,70 8,40 37, D 100-2/044 LG-9 YLG 5,13 3,70 8,40 37, D 100-2/044 LG-9 WLG 5,13 3,70 8,40 37, D 100-2/044 LG-2 ULG 5,13 3,70 8,40 37, D 100-2/044 LG-2 YLG 5,13 3,70 8,40 37, D 100-2/044 LG-2 WLG 5,13 3,70 8,40 37, Amarex N 13
14 Characteristic curves n = 2900 rpm Amarex N S -172, n = 2900 rpm Characteristic curves to ISO 9906 Class 2A / 3B, below 10 kw to The curves refer to the effective motor speed Q [US.gpm] Q [IM.gpm] H [m] Q [m³/h] ø1 38 η [%] 15 ø ø H [ft] Q [l/s] P [hp] P [kw] ø ø1 ø Q [m³/h] K /0 Free passage = 6 mm 14 Amarex N
![3 0 5 Q [m³/h] 10 15 24 39.5 32 40.2 28 39.5 15 24 ø1 38 η [%] 15 ø140 35.5 32 28 24 ø160 100 80 60 40 H [ft] 0 1.8 0 2 Q [l/s] 4 6 1.5 2.0 P [hp] 1.](/docs-images/40/15275244/images/page_14.jpg "5 1.0 P [kw] ø140 1.0 ø1 ø160 0.5 0 5 Q [m³/h] 10 15 K2563-52-14/0 Free passage = 6 mm 14 Amarex N")
15 Amarex N S -222, n = 2900 rpm Characteristic curves to ISO 9906 Class 2A / 3B, below 10 kw to The curves refer to the effective motor speed Q [US.gpm] Q [IM.gpm] η [%] H [ft] ø H [m] 15 ø Q [m³/h] Q [l/s] P [hp] ø190 P [kw] ø Q [m³/h] K /0 Free passage = 6 mm Amarex N 15
![4 32 38 34.5 32 H [ft] 28 28 24 10 24 ø190 15 H [m] 15 ø175 0 0 5 Q [m³/h] 10 15 0 3.5 0 2 Q [l/s] 4 6 3.0 4 P [hp] 2.](/docs-images/40/15275244/images/page_15.jpg "5 3 2.0 ø190 P [kw] ø175 1.5 0 5 Q [m³/h] 10 15 K2563-52-15/0 Free passage = 6 mm Amarex N 15")
16 Amarex N F -170, n = 2900 rpm Characteristic curves to ISO 9906 Class 2A / 3B, below 10 kw to The curves refer to the effective motor speed Q [US.gpm] Q [IM.gpm] η [%] H [m] Qmax ø ø ø1 ø H [ft] ø Q [m³/h] Q [l/s] ø ø1 P [hp] P [kw] ø1 2 1 ø107 ø Q [m³/h] 40 Free passage = 40 mm K /0 16 Amarex N
![4 44.5 40.5.5.5 44 43.4 40.5 37.5.5 40.5 37 40.0 40.5 37 37 37 ø1 31 31 ø107 40.5 ø1 ø140 60 40 H [ft] ø90 0 0 0 10 Q [m³/h] 40 2.](/docs-images/40/15275244/images/page_16.jpg "8 0 2 Q [l/s] 4 6 8 10 12 ø140 3 2 ø1 P [hp] P [kw] ø1 2 1 ø107 ø90 1 0.2 0 10 Q [m³/h] 40 Free passage = 40 mm K2563-52-13/0 16 Amarex N")
17 Amarex N F -2, n = 2900 rpm Characteristic curves to ISO 9906 Class 2A / 3B, below 10 kw to The curves refer to the effective motor speed Q [US.gpm] Q [IM.gpm] H [m] Qmax η [%] ø ø ø ø ø H [ft] Q [m³/h] 40 ø1 0 5 Q [l/s] ø180 8 ø170 ø ø1 P [hp] P [kw] ø140 4 ø Q [m³/h] 40 Free passage = 40 mm K /0 Amarex N 17
![5 47 48.5 48.7 48.5 η [%] 47.3 47 48.8 48.5 45 49.1 47 ø180 48.5 49.5 ø170 47 48.5 47 ø160 48.](/docs-images/40/15275244/images/page_17.jpg "5 47 ø1 47 45 45 ø140 1 100 80 60 H [ft] 40 6 0 10 Q [m³/h] 40 ø1 0 5 Q [l/s] 10 15 6 ø180 8 ø170 ø160 6 4 ø1 P [hp] P [kw] ø140 4 ø1 2 2 0.")
18 Amarex N F , n = 2900 rpm Characteristic curves to ISO 9906 Class 2A / 3B, below 10 kw to The curves refer to the effective motor speed Q [US.gpm] Q [IM.gpm] η [%] H [m] Qmax ø146 ø136 ø128 ø1 ø152 ø H [ft] Q [m³/h] Q [l/s] ø ø152 P [hp] 3 ø146 4 ø136 2 ø128 ø1 P [kw] Q [m³/h] Free passage = 65 mm K /0 18 Amarex N
![5 38 46.5 44.5 45.9 44.5 44.5 38 44.5 44.5 45.1 44.1 44.5 38 38 38 38 ø146 ø136 ø128 ø1 ø152 ø158 60 H [ft] 40 1 4.](/docs-images/40/15275244/images/page_18.jpg "8 0 Q [m³/h] 40 60 80 0 5 Q [l/s] 10 15 25 ø158 6 4 ø152 P [hp] 3 ø146 4 ø136 2 ø128 ø1 P [kw] 2 1 0 Q [m³/h] 40 60 80 Free passage = 65 mm")
19 n = 14 rpm Amarex N F 65-2, n = 14 rpm Characteristic curves to ISO 9906 Class 2A / 3B, below 10 kw to The curves refer to the effective motor speed Q [US.gpm] Q [IM.gpm] η [%] H [ft] 2 H [m] ø135 ø125 ø ø155 ø145 ø165 ø175 ø185 ø Q [m³/h] Q [l/s] ø195 2 ø185 P [hp] 1.0 ø175 ø165 P [kw] 1 ø ø112 ø135 ø125 ø Q [m³/h] Free passage = 65 mm K /0 Amarex N 19
![1 53 55.5 55.5 53 η [%] 53 53 49 49 49 H [ft] 2 H [m] 32 38.0 45.5 44.](/docs-images/40/15275244/images/page_19.jpg "2 32 49 32 32 ø135 ø125 ø112 49 49 ø155 ø145 ø165 ø175 ø185 ø195 10 0 0 10 Q [m³/h] 40 60 70 0 1.7 0 5 Q [l/s] 10 15 1.5 ø195 2 ø185 P [hp] 1.")
20 Amarex N F 80-2, n = 14 rpm Characteristic curves to ISO 9906 Class 2A / 3B, below 10 kw to The curves refer to the effective motor speed Q [US.gpm] Q [IM.gpm] H [m] ø210 ø195 0 Q [m³/h] ø ø Qmax 58 ø1 η [%] 58 ø165 ø H [ft] Q [l/s] 40 4 ø210 ø195 3 ø180 4 ø165 P [hp] 2 ø1 P [kw] 2 1 ø1 ø Q [m³/h] Free passage = 76 mm K /0 Amarex N
![6 62 40 58 62 58 62 63.0 58 ø210 ø195 0 Q [m³/h] 40 60 80 100 1 140 62.4 ø1 62 58 62 40 61.](/docs-images/40/15275244/images/page_20.jpg "5 ø135 58 Qmax 58 ø1 η [%] 58 ø165 ø180 40 H [ft] 10 0 4.4 0 10 Q [l/s] 40 4 ø210 ø195 3 ø180 4 ø165 P [hp] 2 ø1 P [kw] 2 1 ø1 ø135 0.")
21 Amarex N F 100-2, n = 14 rpm Characteristic curves to ISO 9906 Class 2A / 3B, below 10 kw to The curves refer to the effective motor speed Q [US.gpm] Q [IM.gpm] H [m] η [%] Qmax ø135 ø ø180 ø165 ø1 41 ø195 ø H [ft] Q [m³/h] Q [l/s] 40 4 ø210 ø195 3 ø180 4 ø165 2 ø1 P [hp] P [kw] ø135 2 ø Q [m³/h] Free passage = 100 mm K /0 Amarex N 21
22 Amarex N D 80-2, n = 14 rpm Characteristic curves to ISO 9906 Class 2A / 3B, below 10 kw to The curves refer to the effective motor speed Q [US.gpm] Q [IM.gpm] η [%] Qmin H [m] ø ø ø ø H [ft] Q [m³/h] Q [l/s] ø ø180 2 ø168 P [hp] 1.0 P [kw] 1 ø Q [m³/h] Free passage = 65 mm K /0 22 Amarex N
23 Amarex N D 100-2, n = 14 rpm Characteristic curves to ISO 9906 Class 2A / 3B, below 10 kw to The curves refer to the effective motor speed Q [US.gpm] Q [IM.gpm] η [%] Qmin H [ft] H [m] ø9 ø ø Q [m³/h] Q [l/s] 40 ø ø9 2.5 P [hp] 2.0 ø195 3 P [kw] Q [m³/h] K /0 2 Free passage = 76 mm Amarex N 23
24 Dimensions and connections Connections Discharge line connections at the duckfoot bend Flanged connection (DN /DN 65) Threaded connection in the flange (DN /DN 65) Clamped connection (DN /DN 65) P2 / P4 P27 P2 / P4 P8 P2 / P4 For standard pipes to DIN 2440 / DIN 2441 With outside diameter of 60.3 mm, steel for DN With outside diameter of 63 mm, PVC (ISO 3606) for DN With threaded flange DN - G 2 With outside diameter of 76.1 mm, steel for DN 65 With outside diameter of 75 mm, PVC (ISO 3606) for DN 65 With threaded flange DN 65 - G 2 1 / 2 For standard pipes to DIN 2440 / DIN 2441 / DIN 2448 With outside diameter of 60.3 mm, steel for DN With outside diameter of 63 mm, PVC (ISO 3606) for DN With outside diameter of 76.1 mm, steel for DN 65 With outside diameter of 75 mm, PVC (ISO 3606) for DN Amarex N
25 Dimensions Amarex N, transportable model Connection elbow with flanges (P14) DN 3 b 2 L 2 2) e 2 DN C 2 Dimensions [mm] DN DN 3 19) C 2 L 2 a 2 1) DN R 2 f 2 Connection elbow with internal and external thread (P14) and threaded flange (P27) DN 3 DN 1 b 3 DN PN 16 L 2 1) Lowest switch-off point for automatic operation 2) Minimum submergence for continuous operation Pump dimensions [mm] Size Pump DN 1 DN 2 a 2 18) b 2 b 3 e 2 f 2 18) R S F S F F F F D F D C 2 Dimensions [mm] DN DN 3 C 2 L 2 G Pump flange DN₂ DN and 65 ISO 7005 PN 16 DIN 21 PN 16 Z f x R9,5 k f H f D f DN 2 DN 80 and 100 ISO 7005 PN16 DIN 21 PN16 D f DN 2 k f Z f x R9, Connection elbow with flange/hose connection (P13) D 1 Dimensions of the pump flange in [mm] Pump size Flange H f DN C 1 L 1 Dimensions [mm] DN D 1 C 1 L H f k f D f Z f 172 S F S F F F F D F D ) If a foot plate is fitted, a₂ + 10 mm 19) DN₃ to ISO 7005/DIN 21 Amarex N 25
26 A A Waste Water Amarex N, stationary model with guide wire, single-rail and guide hoop arrangement, straight claw DN 3 = DN : DIN ISO ASME = standard Guide wire arrangement Single guide rail arrangement Guide hoop arrangement 60 R 3 2) a 1 1) C B a) 100 k 1 b Ø10 DN B DIN 2440 DIN 2448 NF A NF A NF A NF A E ) Ø10 Ø33,7 x 3,2 113 DN 3 E b) DN 3 h 1 R 1 A Ø A f 1 g 60 A A DN 1 l ) Lowest switch-off point for automatic operation 2) Minimum submergence for continuous operation 3) Not included in KSB's scope of supply a) Minimum b) Maximum Dimensions of pump and foundation [mm] Size Pump Foundation DN 1 DN 2 a 1 b 1 d f 1 g h 1 k 1 l 1 m R 1 R 3 Z f DN 3 N O P 172 S F S F Installation in the sump Clamped connection A - A 1 P a) d m C O a) N a) DN 2 Ø63 (PVC) NF EN Ø60,3 DIN 2440 DIN 2448 G NF A NF A NF A NF A G Pump flange DN₂ ISO 7005 PN10/16 DIN 21 PN10/16 Flanged elbow DN₃ ISO 7005 PN 10 - PN16 DIN 21 PN10 - PN16 ASME 2 ASME B16.1 class Ø125 DN PN10-PN16 4 x Z f x R 9,5 Ø DN 2 Ø1,5 ASME 2 1 Ø Amarex N
27 Amarex N, stationary model with guide wire, single-rail and guide hoop arrangement, inclined claw DN 3 = DN : DIN ISO ASME = standard Guide wire arrangement Single guide rail arrangement Guide hoop arrangement R 3 a 1 h 1 R 1 2) 1) C A b 1 B a) k 1 l 1 10 Ø g 60 f 1 Ø10 DN 3 B :129 5 A DIN 2440 DIN 2448 NF A NF A NF A NF A A E ) Ø10 Ø33,7 x 3,2 113 DN 3 A E A b) DN 3 60 f 1 g Ø10 A 1) Lowest switch-off point for automatic operation 2) Minimum submergence for continuous operation 3) Not included in KSB's scope of supply a) Minimum b) Maximum Dimensions of pump and foundation [mm] Size Pump Foundation DN 2 a 1 b 1 d f 1 g h 1 k 1 l 1 m R 1 R 3 Z f DN 3 N O P 172 S S Installation in the sump Clamped connection A - A 1 P a) d m C O a) N a) DN 2 Ø63 (PVC) NF EN Ø60,3 DIN 2440 DIN 2448 G NF A NF A NF A NF A G Pump flange DN₂ ISO 7005 PN10/16 DIN 21 PN10/16 Flanged elbow DN₃ ISO 7005 PN16 DIN 21 PN16 ASME 2 ASME B16.1 class Ø125 DN PN10-PN16 4 x Z f x R 9,5 Ø DN 2 Ø1,5 ASME 2 1 Ø102 1 Amarex N 27
28 Amarex N, stationary installation with twin guide rail arrangement, inclined claw DN 3 = DN : DIN ISO ASME = standard Twin guide rail arrangement E DIN 2440 DIN 2448 NF A NF A NF A NF A Ø10 E ) D k 1 b 1 3) 113 R 3 1) a 1 DN 3 R 1 A g A f 1 h 1 DN 1 Ø l 1 1) Lowest switch-off point for automatic operation 2) Minimum submergence for continuous operation 3) Not included in KSB's scope of supply a) Minimum Dimensions of pump and foundation [mm] Size Pump Foundation DN 1 DN 2 a 1 b 1 d f 1 g h 1 k 1 l 1 m R 1 R 3 Z f DN 3 N O P 172 S F S F Installation in the sump Clamped connection A - A P a) d m D O a) DN 2 N a) Ø63 (PVC) NF EN Ø60,3 DIN 2440 DIN 2448 G NF A NF A NF A NF A Flanged elbow DN₃ ISO 7005 PN16 DIN 21 PN16 ASME 2 ASME B16.1 class 125 G Ø125 DN PN10-PN16 4 x Ø1,5 ASME 2 1 Ø Amarex N
29 Amarex N 65, stationary model with guide wire, single-rail and guide hoop arrangement DN 3 = 65/65: DIN ISO ASME = standard - DN 3 = 65/80: DIN ISO = standard, ASME = variant Guide wire arrangement Single guide rail arrangement Guide hoop arrangement R 3 a1 2) 1) B C k 1 b 1 a) Ø DN 3 B E Ø33,7 x 3,2 DIN 2440 DIN 2448 NF A NF A NF A NF A ) Ø E DN 3 b) 1800 h 1 R 1 A 165 A A A f 1 g A A DN 1 60 Ø10 l 1 1) Lowest switch-off point for automatic operation 2) Minimum submergence for continuous operation 3) Not included in KSB's scope of supply a) Minimum b) Maximum Dimensions of pump and foundation [mm] Size Pump Foundation DN 1 DN 2 a 1 b 1 d f 1 g h 1 k 1 l 1 m R 1 R 3 Z f DN 3 N O P F F Installation in the sump Flanged elbow DN A - A 165 C O a) DN 65/65 ISO 7005 PN16 DIN 21 PN16 ASME B 16.1 class / 2 12 m DN 2 D f Ø65 g f k f D f Ø65 g f k f d N a) P a) Z f x 21 1 Z f x 21 1 Dimensions of the flanged elbow DN 3 [mm] Flange design DN 3 g f k f D f Z f ISO 7005 PN DIN 21 PN ASME B16.1 class , Amarex N 29
30 Extension elbow DN 3 DN 65/80 ISO 7005 PN16 DIN 21 PN16 25 ASME B 16.1 class Clamped connection Ø76,1 (PVC) NF EN Ø75 D DIN 2440 DIN 2448 NF A NF A NF A NF A Ø80 g f k f D f Ø80 g f k f D f Z f x 18 Z f x 19 D Amarex N
31 Amarex N 65, stationary installation with twin guide rail arrangement DN 3 = 65/65: DIN ISO ASME = standard - DN 3 = 65/80: DIN ISO = standard, ASME = variant Twin guide rail arrangement DIN 2440 DIN 2448 NF A NF A NF A NF A D E Ø33,7 x 3,2 k ) 85 Ø10 E ) b R 3 1) a 1 DN 3 R 1 A h 1 DN 1 10 l f 1 g A 1) Lowest switch-off point for automatic operation 2) Minimum submergence for continuous operation 3) Not included in KSB's scope of supply a) Minimum Dimensions of pump and foundation [mm] Size Pump Foundation DN 1 DN 2 a 1 b 1 d f 1 g h 1 k 1 l 1 m R 1 R 3 Z f N O P F F Installation in the sump Flanged elbow DN A - A 165 D O a) DN 65/65 ISO 7005 PN16 DIN 21 PN16 ASME B16.1 class /2 12 m DN 2 D f Ø65 g f k f D f Ø65 g f k f d a) P Z f x 21 1 Z f x 21 1 a) N Dimensions of the flanged elbow DN 3 [mm] Flange design DN 3 g f k f D f Z f ISO 7005 PN DIN 21 PN ASME B16.1 class , Amarex N 31
32 Extension elbow DN 3 DN 65/80 ISO 7005 PN16 DIN 21 PN16 25 ASME B16.1 class Clamped connection Ø76,1 (PVC) NF EN Ø75 D DIN 2440 DIN 2448 NF A NF A NF A NF A Ø80 g f k f D f Ø80 g f k f D f Z f x 18 Z f x 19 D 32 Amarex N
33 Amarex N 80 and 100, stationary installation with guide wire and single guide rail arrangement DN 3 = 80/80: DIN ISO = standard, ASME = variant - DN 3 = 80/100 or 100/100: DIN ISO ASME = standard Guide wire arrangement R 1 R 3 Waste Water 2) C b 1 B a) k Ø10 B Single guide rail arrangement E 3) Ø10 E Ø 60,3 x 3,6 DIN 2440 DIN 2448 NF A NF A NF A NF A G 1) DN 3 G 1 DN3 h 1 a 1 g H H A A A A f 1 L DN 1 l 1 ØK 1) Lowest switch-off point for automatic operation 2) Minimum submergence for continuous operation 3) Not included in KSB's scope of supply a) Minimum Pump dimensions [mm] Size Pump DN 1 DN 2 a 1 b 1 d f 1 g h 1 k 1 l 1 m R 1 R F D F D Dimensions of the foundation in [mm] Size Foundation DN 3 A B C D E G G 1 H J øk L N O P 80 2 F/D , F/D , F/D , Installation in the sump Flanged elbow DN B D E A - A C A D B d m N a) C O a) DN 2 a) P DN 80/80 ISO 7005 PN16 DIN 21 PN16 DN 100/100 ISO 7005 PN16 DIN 21 PN16 ASME B16.1 class Z f x 18 DN 80/80 ASME B16.1 class DN 3 g f k f D f Z f x R9,5 Ø80 g f k f D f Amarex N 33
34 Extension elbow DN 3 DN 80/100 ISO 7005 PN16 DIN 21 PN16 DN 80/100 ASME B16.1 class Dimensions of the flanged elbow DN 3 [mm] Flange design DN 3 g f k f D f Z f ISO 7005 PN DIN 21 PN ASME B16.1 class , ,5 2 8 Ø100 g f k f D f g f k f D f 25 DN 3 Z f x 19 Z f x Amarex N
35 Amarex N 80 and 100, stationary installation with twin guide rail arrangement DN 3 = 80/80: DIN ISO = standard, ASME = variant - DN 3 = 80/100 or 100/100: DIN ISO ASME = standard Twin guide rail arrangement 2) DIN 2440 DIN 2448 NF A NF A NF A NF A D E b 1 k ) Ø10 55 E G 1 1) DN 3 R 3 A a 1 A h 1 R 1 H f 1 g DN 1 Ø18 l ) Lowest switch-off point for automatic operation 2) Minimum submergence for continuous operation 3) Not included in KSB's scope of supply a) Minimum b) Maximum Pump dimensions [mm] Size Pump DN 1 DN 2 a 1 b 1 d f 1 g h 1 k 1 l 1 m R 1 R F D F D Installation in the sump A - A C D O a) Na) B D D B P a) d m DN 2 E A Dimensions of the foundation in [mm] Size Foundation DN 3 A B C D E G 1 H J N O P 80 2 F D F D Amarex N 35
36 Flanged elbow DN Extension elbow DN 3 DN 80/80 ISO 7005 PN16 DIN 21 PN16 DN 100/100 ISO 7005 PN16 DIN 21 PN16 ASME B16.1 class Z f x 18 DN 80/80 ASME B16.1 class DN 80/80 ISO 7005 PN16 DIN 21 PN16 25 Ø100 g f k f D f DN 80/100 ASME B16.1 class DN 3 DN 3 g f k f D f Z f x R9,5 Ø80 g f k f D f g f k f D f Dimensions of the flanged elbow DN 3 [mm] Z f x 19 Z f x 19 Flange design DN 3 g f k f D f Z f ISO 7005 PN DIN 21 PN ASME B lbs , , Amarex N
37 Installation types Overview of installation types Installation type S - stationary wet installation P7 P1 P7 P2 P7 P1 P4 P1 P4 P5 P5 P5 Guide hoop arrangement Guide wire arrangement Single guide rail arrangement P1: pump P2: installation parts for guide hoop arrangement (Amarex N and 65 only), installation depth = 1.5 m / 1.8 m / 2.1 m P5: claw P7: chain and shackle, length = 2 m P1: pump P4: installation parts for guide wire arrangement, installation depth = 4.5 m P5: claw P7: chain and shackle, length = 5 m P1: pump P4: installation parts for single guide rail arrangement P5: claw P7: chain and shackle, length = 5 m Installation type P - transportable wet installation P7 P7 P1 P1 P5 P4 P6 Twin guide rail arrangement P1: pump P4: installation parts for twin guide rail arrangement P5: claw and adapter P7: chain and shackle, length = 5 m P1: pump P6: foot P7: chain and shackle, length = 5 m Amarex N 37
38 Notes on installation Suggested installation layouts for transportable pump sets Size P1 P17 P14 P27 P18 P1 P17 P14 P27 P1 P27 P17 P18 P6 P6 P6 Suggestion 1 Vertical hose connection with elbow (P14) and Storz rigid coupling (P17) (quick connection) Suggestion 2 Vertical hose connection with plastic hose (P18) Suggestion 3 Horizontal hose connection (quick connection) with plastic hose (P18) Sizes 65, 80, 100 P19 P1 P P16 P15 P26 P14 P25 P6 Suggestion 1 Vertical hose connection (quick connection) with plastic hose (P19) and hose clip (P) P19 P1 P P13 P25 P6 Suggestion 2 Vertical hose connection with plastic hose (P19), hose clip (P) and connection elbow (P13) P1 P25 P15 P16 P P19 P6 Suggestion 3 Horizontal hose connection (quick connection) with plastic hose (P19), hose clip (P), Storz hose coupling (P16), Storz rigid coupling (P15) P1 to P27 ( Page ) 38 Amarex N
39 Suggested installation layouts for stationary pump sets Sizes, 65, 80, 100 Guide hoop arrangement Amarex N S -172/F -170, S -222/F -2, F /65-2 Suspended installation Amarex N S -172/F -170, S -222/F -2, F /65-2 P7 P22 P21 P7 P22 P21 P1 P1 P8/P27 P14 P27 P4 Suggestion 1 Single-pump station Flanged duckfoot bend Suggestion 2 Single-pump station for 1.5 m installation depth Direct connection to discharge pipe (suspended installation) Guide wire, single guide rail or twin guide rail arrangement Amarex N, 65, 80, 100 P4 P22a) P24 P21a) P23 P22a) P24 P21a) P23 P7 P7 P1 P8/P27a) DN 1 P1 P4 Suggestion 3 Either with guide wire, single guide rail or twin guide rail arrangement Single-pump station for 4.5 m installation depth Flanged duckfoot bend Suggestion 4 Either with guide wire, single guide rail or twin guide rail arrangement Dual-pump station for 4.5 m installation depth Flanged duckfoot bend a) DN only Amarex N 39
40 Dimensions Guide wire arrangement Amarex N, 65, 80, 100 DN 2 K G B DN 1 DN 1 E ØD L ØA Ma) O E Single-pump station for 4.5 m installation depth Flanged duckfoot bend Na) Dual-pump station for 4.5 m installation depth Flanged duckfoot bend a) minimum Dimensions [mm] Amarex N Ø A B Ø D E G K L M N O DN 1 DN 2 S -172 / 1 pump F pumps S -222 / 1 pump F -2 2 pumps F / 1 pump F pumps F 80-2 / 1 pump D pumps F pump pumps Amarex N
41 Suggested electrical installation layouts Amarex N is available in explosion-proof and nonexplosionproof design. CEE motor protection switch (up to 4.0 kw) E E51 E52 E53 E4/E11, E14, E17, E19 E E51 E52 E53 E, E21, E23, E24 E60 E63 Suggested installation layout No. 1 Suggested installation layout No. 2 Non-explosionproof Explosion-proof Scope of supply Wet-installed stationary pump sets Pump set complete with power cables Claw with sealing element (O-ring) and mounting elements Lifting rope/lifting chain ) Mounting bracket with mounting elements Duckfoot bend with mounting elements Guiding accessories (guide rails are not included in KSB's scope of supply) Wet-installed transportable pump sets Pump set complete with power cables Feet (and foot plate, if applicable) Lifting rope/lifting chain 21) ) Optional 21) Optional Amarex N 41
42 Accessories Installation parts for stationary pump sets Overview of installation parts for stationary installation Item Description Sizes Connection/ installation depth Guide hoop arrangement P2 + P5 P2 + P5 P2 + P5 Installation parts for stationary wet installation (guide hoop arrangement) Consisting of: DN flanged duck foot bend, stainless steel anchor bolts, guide rail, claw with stainless steel screws/bolts, NOW WITHOUT CHAIN Installation parts for stationary wet installation (guide hoop arrangement) Consisting of: DN 65 flanged duck foot bend, stainless steel anchor bolts, guide rail, claw with stainless steel screws/bolts, NOW WITHOUT CHAIN Installation parts for stationary wet installation (guide hoop arrangement) Consisting of: DN 65/80 flanged duck foot bend, stainless steel anchor bolts, guide rail, claw with stainless steel screws/bolts, NOW WITHOUT CHAIN Guide wire arrangement P4 + P5 Installation parts for stationary wet installation, installation depth 4.5 m (guide wire installation) Consisting of: flanged duck foot bend, stainless steel anchor bolts, suspension bracket, mounting bracket, 10 m guide wire, claw with stainless steel screws/bolts, NOW WITHOUT CHAIN Single guide rail arrangement P4 + Installation parts for wet-installed stationary P5 pump sets (single guide rail arrangement) for installation depth = 4.5 m Consisting of: flanged duckfoot bend, stainless steel anchor bolts, mounting bracket, claw with stainless steel screws/bolts, NOW WITHOUT CHAIN (guide rail not included in KSB's scope of supply) Twin guide rail arrangement x2 P4 + Installation parts for wet-installed stationary P5 pump sets (twin guide rail arrangement) for installation depth = 4.5 m x4 x4 Consisting of: flanged duckfoot bend, stainless steel anchor bolts, mounting bracket, adapter, claw with stainless steel screws/bolts, NOW WITHOUT CHAIN (guide rails not included in KSB's scope of supply) Amarex DN, DN 3: DIN ISO ASME straight claw Amarex N DN, DN 3: DIN ISO ASME inclined claw Amarex N DN 65, DN 3: DIN ISO ASME Amarex N DN 65/80, DN 3: DIN/ISO Amarex N DN 65/80, DN 3: ASME Mat. No. [kg] Inst. depth 1.5 m Inst. depth 1.8 m Inst. depth 2.1 m Inst. depth 1.5 m Inst. depth 1.8 m Inst. depth 2.1 m Inst. depth 1.5 m Inst. depth 1.8 m Inst. depth 2.1 m Inst. depth 1.5 m Inst. depth 1.8 m Inst. depth 2.1 m Inst. depth 1.5 m Inst. depth 1.8 m Inst. depth 2.1 m Amarex N DN, DN 3: DIN ISO ASME straight claw Amarex N DN, DN 3: DIN ISO ASME inclined claw Amarex N DN 65, DN 3: DIN ISO ASME Amarex N DN 65/80, DN 3: DIN/ISO Amarex N DN 65/80, DN 3: ASME Amarex N DN 80, DN 3: DIN/ISO Amarex N DN 80, DN 3: ASME Amarex N DN 80/100, DIN ISO ASME Amarex N DN 100, DIN ISO ASME Amarex N DN, DN 3: DIN ISO ASME straight claw Amarex N DN, DN 3: DIN ISO ASME inclined claw Amarex N DN 65, DN 3: DIN ISO ASME Amarex N DN 65/80, DN 3: DIN/ISO Amarex N DN 65/80, DN 3: ASME Amarex N DN 80, DN 3: DIN/ISO Amarex N DN 80, DN 3: ASME Amarex N Amarex N Amarex N inclined claw Amarex N straight claw DN 80/DN 100, DN 3: DIN ISO ASME DN 100, DN 3: DIN ISO ASME DN, DN 3: DIN ISO ASME DN 65, DN 3: DIN ISO ASME DN 65/80, DN 3: DIN/ISO DN 65/80, DN 3: ASME DN 80, DN 3: DIN/ISO DN 80, DN 3: ASME DN 80/100, DN 3: DIN ISO ASME DN 100, DN 3: DIN ISO ASME Amarex N
Series description: Wilo-Drain TC 40
Series description: Wilo-Drain TC 40 H[m] Wilo-Drain TC 40 10 8 6 4 2 TC 40/8 TC 40/10 0 0 2 4 6 8 10 12 14 Q[m³/h] Design Submersible sewage pump Application Pumping heavily contaminated fluids for House/site
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
Flygt 3068, 50Hz. Technical Specification
Flygt 3068, 50Hz Technical Specification Table of Contents Table of Contents B-pump...2 Product description...2 Motor rating and performance curves...4 C-pump...6 Product description...6 Motor rating
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
Conlift1, Conlift2, Conlift2 ph+
GRUNDFOS DATA BOOKLET Conlift1, Conlift2, Conlift2 ph+ Small lifting stations 50 Hz CONLIFT1, CONLIFT2, CONLIFT2 ph+ Table of contents 1. Product overview 3 Conlift for condensate applications 3 Applications
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
The Company. QUALITY WHICH REDUCES PUMPING COSTS For over 45 years, PAPANTONATOS S.A. has focused on the customer s design,
The Company QUALITY WHICH REDUCES PUMPING COSTS For over 45 years, PAPANTONATOS S.A. has focused on the customer s design, manufacturing and service needs in the field of submersible pumps. Our engineering
Multistage high-pressure multistage centrifugal pumps
Series description Wilo-Helix V 2 4 6 8 Wilo-Helix V 19-27 7 6 6 Hz - North America 22 2 18 5 16 14 4 12 3 1 V 1 V 19 V 27 8 2 6 1 5 1 15 2 25 3 4 2 35Q[US gpm] H[ft] H[m] Design Vertical multi-stage,
Submersible pumps Grundfos With top exit Mop sump pomps Simer en City With top exit Submersible pumps Homa Submersible pumps DAB
Submersible pumps Grundfos With top exit Mop sump pomps Simer en City With top exit Submersible pumps Homa Submersible pumps DAB Grunfos KP sump pump completely made of stainless steel.. Very effective
KTZ32.2-51. data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
SISTO-16TWA/HWA/DLU. Type Series Booklet
Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents
Compact pumps from the wastewater experts. FLYGT 3045, 3057, 3068. Power range 0.75 2.4 kw.
Compact pumps from the wastewater experts FLYGT 304, 307, 3068. Power range 0.7.4 kw. Wastewater is unpredictable, Flygt pumps are not If you want a wastewater pump that just works month after month, year
No compromise. Highest total efficiency wastewater pumping. grundfos se & sl ranges Submersible and dry-installed wastewater pumps
grundfos se & sl ranges Submersible and dry-installed wastewater pumps 0.9-30 kw 2, 4, 6 pole 50Hz No compromise Highest total efficiency wastewater pumping ULTIMATE WASTEWATER PUMPING TECHNOLOGY The renewed
CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages 2448LSG_P1 R4/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
SJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
The conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
SIR 900-1100. INTERMEDIATE LIFTING STATIONS Communal waste water 50 Hz OPERATING LIMITS APPLICATIONS. AdVANTAGES
OPERATING LIMITS Useful volume up to : L 9 L Ambient temperature : to + C Max.fluid temperature : + C* passing blade at : mm Ø Inlet dia. : mm DN Ø Outlet dia. : / Ø Vent dia.: mm Ø Cable passage : mm
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Flygt N-Pumps 3085, 3102 & 3127. For reliable and efficient wastewater handling
Flygt N-Pumps 3085, 3102 & 3127 For reliable and efficient wastewater handling The Concept Flygt N-Pump series Reduced pumping efficiency, high energy and maintenance costs shouldn t be a fact of life
SIGMA GROUP a. s. Divize průmyslová čerpadla
SIGMA GROUP a. s. Divize průmyslová čerpadla SIGMA GROUP a. s. INDUSTRIAL PUMP DIVISION Jana Sigmunda 79, 783 50 LUTÍN SEWAGE PUMPS NFPH, NFVH, NFJH, NFRH, NFPV, NFVV, NFJV, NFRV, NFPW NFVW Tel.: +420
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR AT_-1/ Hz DN1 3 r/min min H G 1/ G 1/ 17 11 3xM, Depth 1 1 Ø1 Ø1 xø19 7 3xØ1 9 17 1 xø1 17 1 kw A kg H OKN-13 E1 F19 7. (9). 9 OKN-13 C1 F19. (.) 11. 1 9 OKN-1 E1
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
CRK 2-130 A-W-A-BUBV 85805906
GRUNDFOS DATA BOOKLET CRK 2-13 A-W-A-BUBV 858596 Grundfos Pump 497113 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/497113/crk-2-13-13-a-w-a-auuv.html
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
SEG range 0.9 4.0 kw GRUNDFOS WASTEWATER
SEG range 0.9 4.0 kw GRUNDFOS WASTEWATER Grundfos SEG range Tough, versatile pumps for domestic sewage transfer In areas with no sewer systems, or areas where gravitation systems are unsuitable, pressurised
4" SUBMERSIBLE PUMPS
4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant
Heating, air-conditioning, cooling
Series description Design High efficiency, single stage, low pressure, inline centrifugal pump Supplied with EC motor and electronic duty adaptation Available in glanded construction, mechanical shaft
Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]
![1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]](/thumbs/40/20910486.jpg "1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]")
Product review: Range: Wilo-Star....... Star F Star Star Star F Star Star FX [m /h] Wilo-Star Cast iron body Hz [US gpm].......... [m /h] Wilo-Star Bronze body 9 Hz [US gpm] Star Star Star Star Star BF
Series description: Wilo-Yonos MAXO
16 88 / Series description: Wilo-Yonos MAXO /,5-1 1 Wilo-Yonos MAXO 1 5/,5-1 8 6 /,5-5/3/,5-7 5/3/,5-1 /5/,5-8 65/,5-9 5/,5-9 5/3/,5-1 5 1 15 5 Design Glandless circulation pump with threaded connection
Product Catalogue. ETX, Stainless steel threaded centrifugal pumps, 50 Hz
Product Catalogue ETX, Stainless steel threaded centrifugal pumps, Hz Contents Introduction... ETX... Choosing the right pump There are a wide range of pumps to select from. In order to find the right
Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps.
5 Hz PUMP HANDBOOK Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps. You will find an overview of all Grindex pumps with
N-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING. Flygt
N-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING Flygt The Concept N-Pump series. Bringing NEW levels of efficiency to wastewater handling applications Reduced pumping efficiency,
Model 1210C Battery Powered Pump Shown. Description
12 Volt DC Rotary Vane Pump Series 1200C Model 1210C Battery Powered Pump Shown Description of Included Models Model Number FR1205C FR1210C FR1211C FR2410C FR2411C Description Basic 12 volt DC pump with
SIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
Wilo SP Series Submersible Sump Pumps ECS. ECS19-15.25 ECS22-15.33 ECS24-15.50 Installation and operating instructions
Wilo SP Series Submersible Sump Pumps ECS ECS19-15.25 ECS22-15.33 ECS24-15.50 Installation and operating instructions PREINSTALLATION CHECK Inspect this pump before it is used. Occasionally, pumps can
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
Series description: Wilo-Yonos MAXO-D
ATAC Solutions LTD / 1 / Series description: 1 /,5-1 1 5/,5-1 3/,5-7 3 3 5/ /, / 11 5-,5-,5-9 Design Glandless circulation pump with threaded connection or flange connection, EC motor with automatic power
Series 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
Dry Pit Solids Handling Pumps
Dry Pit Solids Handling Pumps A Time-Tested Leader Chicago Pump Dry Pit Solids Handling Pumps have an established reputation of efficiency, long life and reliable operation First in: Quality 3Reliability
KESSEL KTP 500 Submersible Pump with lateral and vertical outlet connection Order Numbers 28710, 28810, 28850
INSTALLATION AND OPERATING INSTRUCTIONS KESSEL KTP 500 Submersible Pump with lateral and vertical outlet connection Order Numbers 28710, 28810, 28850 Product advantages Automatic float switch as water
How To Pump A Pump
Multistage Pumps P, PVa, MP 300 Technical Data Performance range: m Capacities up to 1800m 3 /h (8800USgpm) m Head up to 300m (1000feet) m Max. speed up to 1750rpm Multistage pumps of series MP with smaller
Vertical Pumps for the Oil & Gas Industry
Vertical Pumps for the Oil & Gas Industry ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market, which is the largest segment of our business. We have been investing in technology to
TECHNICAL BROCHURE B5-33GB 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB GB, 7GB, 1GB, 18GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
LC/LCD ranges level controllers
GRUNDFOS WASTEWATER LC/LCD ranges level controllers 18 Grundfos Sololifts > Grundfos LC/LCD controllers Keeping a close eye on liquid levels Reliable level controllers from Grundfos Grundfos offers a choice
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY TYPICAL APPLICATIONS Water supply Transfer and distribution from water systems Pressure boosting in apartment buildings
Scraper Passage Indicator. Electrical Indicator. Features
IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
1. Description. 2. List of Accessories included A B C F G H
1. Description This unit is a pump that will clear the waste from a domestic shower and washbasin. The unit will start automatically. Please pay particular attention to the following: Possible danger to
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Smart Electromagnetic Flowmeter Open channel Flowmeter Detector
Magne3000 PLUS Smart Electromagnetic Flowmeter Open channel Flowmeter Detector Model NNK150/951 OVERVIE The Magne3000 PLUS Electromagnetic Flowmeter is submersible type of flowmeter mainly used for flow
sealed close coupled pumps
sealed close coupled pumps centrifugal self-priming 1 - and are different configurations of the same range of centrifugal axle pumps, self-priming which offers reliability in use. Specifically designed
VM, VMC, VMN. Vertical Multistage Centrifugal Pump, 60Hz
VM, VMC, VMN Vertical Multistage Centrifugal Pump, 60Hz Approvals CERTIFICATE IQNet and SQS hereby certify that the organisation Swiss Pump Company AG 3645 Thun-Gwatt Switzerland Whole Company Design,
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
Linear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
Transformer oil cooler ALFA A02
A02 Transformer oil cooler ALFA Transformer oil cooler ALFA The transformer oil cooler ALFA is used to cool power transformers by means of forced air and oil flow. The oil in the cooler is circulated using
Horizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
Linear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
BSM MOTOR DRIVEN CENTRIFUGAL PUMPS
PRINCIPLE OF OPERATION A hydraulically and dynamically balanced impeller with raised vane sections discharges liquid as a result of the centrifugal force developed in rotation. The head developed is entirely
Standard offering (pumps)
MDM PUMPS LTD Spring Lane Malvern, Worcs. England. WR14 1BP This outlines what we typically supply. Tel: +44 (0)1684 892678 Fax: +44 (0)1684 892841 E-mail: Website: Standard offering (pumps) info@mdmpumps.co.uk
extreme applications as standard
grundfos INDUSTRY The insurmountable CR extreme applications as standard THE unsurmountable CR A company you can trust Back in 1971 Grundfos shocked the pump world with the introduction of the CR30 - the
Oil and Coolant Circulating Heating System. Model - OCSM
Oil and Coolant Circulating Heating System Model - OCSM Installation & Operation Manual 216280-000 REV 2 Identifying Your System The HOTSTART heating system is designed to heat fluids for use in marine
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
Vertical selfpriming Side-Channel Pumps Type WPV
Vertical selfpriming Side-Channel Pumps Type WPV FIELD OF APPLICATION The side-channel pumps are selfpriming and operate more economically (better efficiency) than normal centrifugal pumps when handling
Goulds AF. Axial Flow Pump
Goulds AF Axial Flow Pump Goulds AF The Industry Leader in Circulating Pump Technologies Fabricated design 42-66 (1050-1600 mm) (shown with optional spring mounted base) Cast design 6-36 (150-900 mm) Goulds
IMPORTANT SAFETY NOTICE
IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will minimize your risk of injury. ITT Goulds
ANDRITZ Ritz Product range Pumps and motors
ANDRITZ Ritz Product range Pumps and motors www.andritz.com 02 Welcome to the world of ANDRITZ Ritz Water supply Mining Industry Sewage For over 125 years, the name ANDRITZ Ritz has stood for the highest
JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS.
Redi-Flo2, 2 Environmental Submersible Pumps MP1 Submittal Data QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS Technical Data Motor Type: Water-Filled, variable speed submersible Maximum Fluid
Climasys Thermal Management System. Schneider Electric Universal Enclosures 2009
Climasys Thermal Management System Schneider Electric Universal Enclosures 2009 Schneider Electric Universal Enclosures The specialist in sealed equipment What is the mission of Schneider Electric Universal
Terminal Boxes Series 8146
Series > Enclosures in shock-resistant glass fibre reinforced polyester resin > basic enclosure sizes various heights > Fitted according to the customer's requirements > For terminals up to max. 00 mm
VAD. Variable Area Desuperheaters
Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated
SVA SIGMA PUMPY HRANICE SELF PRIMING PUMPS 426 2.98 16.05
SIGMA PUMPY HRANICE SELF PRIMING PUMPS SVA SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +40 581 661 111, fax: +40 581 60 587 Email: sigmahra@sigmahra.cz 46.98 16.05 Applications
MOBILE FIRE - RESCUE DEPARTMENT FIRE CODE ADMINISTRATION
MOBILE FIRE - RESCUE DEPARTMENT FIRE CODE ADMINISTRATION Fire Pump Plan Review 2009 International Fire Code and NFPA 20 Date of Review / / BLD201 - Project Address: Project Name: Contractor s Business
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
SRA-125/SRAX-125 Double-Rail Lift-Out Rail System Installation & Service Manual with Parts List
SRA-125/SRAX-125 Double-Rail Lift-Out Rail System Installation & Service Manual with Parts List For MG, WG, WGL, and Grinder Pumps for Effluent & Sewage CAUTION! Read these safety warnings first before
Fire Pump Plan Review March 2010
Fire Pump Plan Review March 2010 Date of Review: / / Permit Number: Business/Building Name: Address of Project: Designer Name: Designer s Phone: Contractor: Contractor s Phone: Occupancy Classification:
Industrial Process Pump Safety Manual IMPORTANT SAFETY NOTICE
Industrial Process Pump Safety Manual IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will
Instruction manual of pumps WQ, WQF, SN, Furiatka, Furia, KRAKEN, BIG, IP, IPE, SWQ, CTR
CAUTION! Instruction manual of pumps WQ, WQF, SN, Furiatka, Furia, KRAKEN, BIG, IP, IPE, SWQ, CTR NOTE: read the manual prior to commencement of use. For safety reasons, the pump can only be operated by
Pumps SELECTION OF A PUMP
Pumps SELECTION OF A PUMP A water system needs to move the water produced from the source to its customers. In almost all cases in Minnesota, the source is at a lower elevation than the user so the water
Installation and Service Instructions. Neutralization System Part no. 7441823 Grünbeck part no. 410480
Installation and Service Instructions for use by heating contractors Neutralization System Part no. 7441823 Grünbeck part no. 410480 Safety and Installation Requirements Please ensure that these instructions
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
O-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
Axial and Mixed Flow Pumps for Large Volume Pumping
Vertical Industrial and Process Axial and Mixed Flow for Large Volume Pumping Encased (Can ) Water and Process Liquid Vertical Turbine for Water Supply from Drilled Wells Vertical close coupled single
Tsurumi BER. Submersible Ejectors
Tsurumi BER 400V 50Hz Submersible Ejectors This submersible ejector is composed of a B type pump and a venturi with diffusor trumpet. The large flow from the pump, first, at high speed, draws and mixes
VAG Non-Return Valves
VAG Non-Return Valves VAG SKR Slanted Seat Tilting Disk Check Valve Body Shaft Disk Bearing bush Seat Technical details Nominal pressure PN 10 / PN 16 Nominal diameter DN 200...1200 Fields of application:
VERTICAL TURBINE AND PROPELLER PUMPS
VERTICAL TURBINE AND PROPELLER PUMPS INTRODUCTION Vertical Turbine and Propeller Pumps Model 7000 Series Turbine Pump Model 800 Series Axial Flow Propeller Pump Model 800 Series Mixed Flow Propeller Pump
Output torques up to 8000 Nm. General features. Protection. External coating. Working temperature range
Type series booklet 8521.15/2--10 ACTELEC 31 to 800 (BERNARD) 1/4 turn electric actuators (irreversible reducer with multi -turn electric actuator ACTELEC 31: screw -nut kinematics ACTELEC 200 to 800:
VAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Vogel - Multistage Pumps Design MP, MPA, MPB, MPV Sizes DN 40 - DN 125
Vogel Pumpen Vogel - Multistage Pumps Design MP, MPA, MPB, MPV Sizes DN 40 - DN 125 1 Performance range: Capacities up to 340 m 3 /h (1500 USgpm) Head up to 500 m (1640 feet) Max. speed up to 3600 min
TECHNICAL BROCHURE BAQUABII. * Available up to 100 GPM systems. Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS
TECHNICAL BROCHURE BAQUABII * Available up to 1 GPM systems Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS FEATURES The AB2 variable speed pump controller and complete booster package kits, provide
Project: Model: Chk d: Date: Model 32DGUII61.5S
Contents Model 32DGUII6.5S 32DGFU6.5S 32DGFU6.5 50DGFU62.2S 50DGFU62.2 50DGFU63.7S 50DGFU63.7 Section Page Specifications 2-38 Selection Chart 2-38 Performance Curves 2-6 Outline Drawings 2-8 Sectional
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
Catalogue Wilo- Stratos PARA
Heating, ir Condition, Cooling, Geothermal heat, Solar heat 25-50W 100W 200W Catalogue Wilo- Stratos PR Wilo-Stratos PR 15/1-5; 20/1-5; 25/1-5; 30/1-5 Wilo-Stratos PR 15/1-7; 20/1-7; 25/1-7; 30/1-7 Wilo-Stratos
VXT. Open Cooling Towers. Open Cooling Towers. Product Detail VXT - B 1. Engineering Data... B2. Structural Support... B6
- B 1 Product Detail Engineering Data... B2 Structural Support... B6 Engineering Specifications... B9 - B 2 Engineering Data REMARK: Do not use for construction. Refer to factory certified dimensions &
This unit is a pump that will clear the waste from a domestic shower and washbasin, bath, washing machine, glass washer and a sink.
1. Description This unit is a pump that will clear the waste from a domestic shower and washbasin, bath, washing machine, glass washer and a sink. The unit will start automatically. Please pay particular