Submittal Data Sheet Wilo IPL - Inline Centrifugal Circulators
|
|
|
- Milton Campbell
- 9 years ago
- Views:
Transcription
1
2 Wilo IPL RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM IPL 1.5-1/5-6Hz 1,75 ( Pole) 6 1 H[ft] H[m] Wilo-IPL 1.5-1/5-175 RPM - 6 Hz - North America Qmin Ø. IPL 1.5-1/5- % 5% % 5% 6.% 5% Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: 1~115 / - V, 6 Hz TEFC, (ODP Opt), EPACT Rated 1¼ with ¼ pressure gauge tappings 15 PSI (1 Bar) % 1 5% % 1. hp 1 Materials of Construction Pump volute Impeller Shaft Mechanical seal Cast Iron Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Q[l/s] 6 1 NPSH [ft] Ø. 6 NPSH [m] Applications Hot water heating Industrial circulation.5 Air conditioning Solar Systems 1 Closed cooling circuits Geothermal Systems 6 1 P [hp]. P [kw] Ø Approval Stamp WIL-SDS-IPL1-1-1
3 Dimensions & Weights a l 1 max* c 1/ Vent Plug x f e lo m x / UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x 1 ¼ ¾ / ¾ 1 / 5¼ 9 1 / 9 / 1 9 / 1 15 / ½ 1 / 5 7 / 5 lbs IPL 1.5-1/5- () (7) (9) (96) (1) (1) (9) (9) () (5) (17) (79) (1) () (5).6 kg Flange Dimensions n x d L Dimensions - Inches (mm) DN ØD Ød 1 Øk n x d L 1.5 ¾ 7 / ½ x 9 / (11) (7) (9) ( x 1) Ø d 1 k Ø D Ø TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] IPL 1.5-1/ / / - WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) Fax: (7) -955 Web: [email protected] Tel: (66) Fax: () Web: [email protected] Tel: Fax: Web: [email protected]
![6 kg Flange Dimensions n x d L Dimensions - Inches (mm) DN ØD Ød 1 Øk n x d L 1.5 ¾ 7 / ½ x 9 / (11) (7) (9) ( x 1) Ø d 1 k Ø D Ø TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] IPL 1.](/docs-images/46/21652099/images/page_3.jpg "5-1/5-. 1 6 /. - 115 / - WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.wilo-canada.")
4 Wilo IPL RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz 1,75 ( Pole) H[ft] Wilo-IPL 1.5-6/95- H[m] 5 Wilo-IPL 1.5-/- 175 RPM - 6 Hz - North America 1 Qmin Ø Ø Ø.9 Ø IPL 1.5-6/95- IPL 1.5-9/95- IPL 1.5-/95- IPL 1.5-/- 5% 5% 57.1% 6 1 6% 6.5% 66.% 66%. hp 1 hp 6%.75 hp 5% 5%.5 hp Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller Shaft Mechanical seal 1~115 / - V, 6 Hz TEFC, (ODP Opt), EPACT Rated 1½ with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Q[l/s] NPSH [ft] NPSH [m] 1 Ø Applications Hot water heating Air conditioning Closed cooling circuits Industrial circulation Solar Systems Geothermal Systems P [hp] 1. Ø 6.1. Ø Ø.9. Ø P [kw].6.. Approval Stamp WIL-SDS-IPL1-1-1
5 Dimensions & Weights a l 1 max* c 1/ Vent Plug x e lo f m x / UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m o p x IPL 1.5-/- IPL 1.5-/95- IPL 1.5-9/95- IPL 1.5-6/95-1½ 15 / 17 7 / 5 / ¾ 5¼ 9 9 / 9 / 1 9 / 1 15 / 7 1 6½ / 1 / 5 7 / 56.7 lbs () (75) () (19) (11) (1) () (9) () (5) (17) () (5) / () (9) 6 kg 1½ 15 / 17 7 / 5 / ¾ 5¼ 9 9 / 9 / 1 9 / 1 15 / 7 1 6½ / 1 / 5 7 / 5.6 lbs () (75) () (19) (11) (1) () (9) () (5) (17) () (5) / () (9) 7 kg 1½ 15 / 1 / 5 / ¾ 5¼ 9 9 / 9 / 1 9 / 1 15 / 6 / 1 6½ / 1 / 5 7 / 6.6 lbs () (75) (1) (19) (11) (1) () (9) () (5) (15) () (5) / () (9) 1 kg 1½ 15 / 17 7 / 5 / ¾ 5¼ 9 9 / 9 / 1 9 / 1 15 / 7 1 6½ / 1 / 5 7 / 76.7 lbs () (75) () (19) (11) (1) () (9) () (5) (17) () (5) / () (9) 5 kg Flange Dimensions n x d L Dimensions - Inches (mm) DN ØD Ød 1 Øk n x d L 1.5 ¾ 7 / ½ x 9 / (11) (7) (9) ( x 1) Ø d 1 Ø k Ø D TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] IPL 1.5-/ / / - IPL 1.5-/ / / - IPL 1.5-9/ / / - IPL 1.5-6/ / / - WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) Fax: (7) -955 Web: [email protected] Tel: (66) Fax: () Web: [email protected] Tel: Fax: Web: [email protected]
6 Wilo IPL 175 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz 1,75 ( Pole) 1 H[ft] H[m] Wilo-IPL -/1- Wilo-IPL -1/ RPM - 6 Hz - North America Qmin 1 Ø 6.1 5% 6% 5 7% % Ø 5.5 7% 5 Ø 5. IPL -/1-71.7% Ø IPL -/1- IPL -/- IPL -1/15-66.% 67.%.75 hp.5 hp 1 hp 6% 1.5 hp 6 Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Engineered composite NPSH [ft] Ø P [hp] Ø 5.5. Ø 5.. Ø.5 1 Q[l/s] NPSH [m] 5 1 P [kw] 1. Ø Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems Approval Stamp WIL-SDS-IPL1-1-1
7 Dimensions & Weights a l 1 max* c 1/ Vent Plug x e lo f m x / UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x IPL -1/15- ½ 17 9 / ½ 5 1 / 5¼ 9¾ 1 / 1 9 / 1 15 / 7 1 6¾ 1 / 5 7 / 66. lbs (5) (9) (6) (11) (1) (1) () (1) () (5) (17) (56) (17) () (51).1 kg IPL -/1- ½ 17 9 / ½ 5 1 / 5¼ 9¾ 1 / 1 9 / 1 15 / 7 1 6¾ 1 / 5 7 / 76. lbs (5) (9) (6) (11) (1) (1) () (1) () (5) (17) (56) (17) () (51).6 kg IPL -/- ½ 17 9 / ½ 5 1 / 5¼ 9¾ 1 / 1 9 / 1 15 / 7 1 6¾ 1 / 5 7 /. lbs (5) (9) (6) (11) (1) (1) () (1) () (5) (17) (56) (17) () (51). kg IPL -/1- ½ 17 9 / ½ 5 1 / 5¼ 9¾ 1 / 1 9 / 1 15 / 7 1 6¾ 1 / 5 7 / 91. lbs (5) (9) (6) (11) (1) (1) () (1) () (5) (17) (56) (17) () (51) 1. kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L TEFC Motor Data 5¼ 7 / ½ x 9 / (1) (7) (1) ( x 1) P Phase FLA Voltage n x dl Model [HP] [~] [A] [V] IPL -1/ / / - IPL -/ / / / / - IPL -/- 1. / / ø d1 ø k ø D / / - WILO USA LLC IPL -/ /. - / WILO Canada Inc. WILO Mexico Tel: (66) Fax: (7) -955 Web: [email protected] Tel: (66) Fax: () Web: [email protected] Tel: Fax: Web: [email protected]
8 Wilo IPL RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz 1,75 ( Pole) H[ft] Wilo-IPL.5-/75- H[m] Wilo-IPL.5-15/15-1 Qmin 175 RPM - 6 Hz - North America 1 Ø 5. Ø. 5% 5% 6% Ø. 6%.75 hp % 5% 1.5 hp 1 hp NPSH [ft] 1 P [hp] Ø 5. Ø.5 IPL.5-/75- IPL.5-/- IPL.5-17/15- IPL.5-15/15-67.% 66.5% 6.7% 66.5% hp Ø.5 Ø 5. Ø 5. Ø 5. Q[l/s] NPSH [m] 1 P [kw] 1... Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated ½ with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems Approval Stamp WIL-SDS-IPL1-1-1
![5-15/15-67.% 66.5% 6.7% 66.5% 1 5 6.5 hp Ø.5 Ø 5. Ø 5. Ø 5. Q[l/s] 9 7 6 5 1 NPSH [m] 1 P [kw] 1.](/docs-images/46/21652099/images/page_8.jpg ".. Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller Shaft Mechanical seal")
9 Dimensions & Weights a l 1 max* c 1/ Vent Plug x e f lo m x ½ 1 UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x IPL.5-15/15- ½ ¾ 17 1 / 11 / 5 7 / 5¼ 1 1 / 5 5 / 1 9 / / 7 1½ 6¾ 1 / 5 7 / 7.7 lbs (65) (95) (5) (119) (1) (1) (57) (15) () (55) (17) () (171) () (57) 5.7 kg IPL.5-17/15- ½ ¾ 7 / 11 / 5 7 / 5¼ 1 1 / 5 5 / 1 9 / / 6 / 1½ 6¾ 1 / 5 7 /. lbs (65) (95) (1) (119) (1) (1) (57) (15) () (55) (15) () (171) () (57). kg IPL.5-/- ½ ¾ 17 1 / 11 / 5 7 / 5¾ 1 1 / 5 5 / 1 9 / / 7 1½ 6¾ 1 / 5 7 / 96. lbs (65) (95) (5) (119) (1) () (57) (15) () (55) (17) () (171) () (57).9 kg ½ ¾ 17 1 / 11 / 5 7 / 5¾ 1 1 / 5 5 / 1 9 / / 7 1½ 6¾ 1 / 5 7 / 9.7 lbs IPL.5-/75- (65) (95) (5) (119) (1) () (57) (15) () (55) (17) () (171) () (57).7 kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L.5 TEFC Motor Data 7 5 / 5½ X ¾ (17) (11) (1) ( x 19) P Phase FLA Voltage n x dl Model [HP] [~] [A] [V] IPL.5-15/ / / - IPL.5-17/ / / / / - IPL.5-/- 1. / / / / - IPL.5-/ /. - / ø d1 ø k ø D WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) Fax: (7) -955 Web: [email protected] Tel: (66) Fax: () Web: [email protected] Tel: Fax: Web: [email protected]
10 Wilo IPL 175 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz 1,75 ( Pole) 6 H[ft] Wilo-IPL -6/6- H[m] Wilo-IPL -/- 9 Qmin 175 RPM - 6 Hz - North America 1 Ø 5. Ø.9 IPL -6/6- IPL -/- 5% 5% 6% 5% 5% 6% 7% 67.6% 7.6% 7% 6% 6% 1.5 hp 5% 5% 5% 1 hp Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Q[l/s] 6 NPSH [ft] NPSH [m] Ø Impeller Shaft Mechanical seal Applications Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) P [hp] P [kw] Ø Ø.9.. Hot water heating Air conditioning Closed cooling circuits Industrial circulation Solar Systems Geothermal Systems Approval Stamp WIL-SDS-IPL1-1-1
11 Dimensions & Weights a l 1 max* c 1/ Vent Plug x e f lo m x ½ 1 UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x IPL -/- 1 / 1 1 / 15 / 6 5¾ 1 7 / 5 5 / 1 9 / / / 5 7 / 1.6 lbs () (15) (5) (15) (15) () (77) (15) () (55) (17) (1) (17) () (6) 7 kg IPL -6/6-1 / 1 1 / 15 / 6 5¾ 1 11 / 5 5 / 1 9 / / / 5 7 / 11.7 lbs () (15) (5) (15) (15) () (71) (15) () (55) (17) (1) (17) () (6) 5. kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L 7½ 5 1 / 6 X ¾ (191) (1) (15.) ( x 19) n x dl TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] / / - IPL -/- 1. / / / / - IPL -6/ /. - / ø d1 ø k ø D WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) Fax: (7) -955 Web: [email protected] Tel: (66) Fax: () Web: [email protected] Tel: Fax: Web: [email protected]
12 Wilo IPL RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz,5 ( Pole) H[ft] Ø.7 57% 55.6% 61% 61.7% 61.% Q[l/s] NPSH [ft] NPSH [m] Ø. 57% Ø.7 Ø P [hp] P [kw] Ø. Ø. Qmin IPL /1- IPL 1.5-6/95- IPL 1.5-/9- % 61% Wilo-IPL /1- Wilo-IPL 1.5-/9-5 RPM - 6 Hz - North America 1.5 hp %.75 hp Ø. 1 hp H[m] 1... Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated 1½ with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems 6 1 Approval Stamp WIL-SDS-IPL1-1-1
![5-59/1- Wilo-IPL 1.5-/9-5 RPM - 6 Hz - North America 1.5 hp %.75 hp Ø. 1 hp H[m] 1.](/docs-images/46/21652099/images/page_12.jpg ".. Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller Shaft Mechanical seal")
13 Dimensions & Weights a l 1 max* c 1/ Vent Plug x e lo f m x / UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x IPL 1.5-/9-1½ 1 15 / / 1 / 9 / 5¼ / 9 / 1 9 / 1 15 / / 5 7 / 56. lbs () (75) (9) (79) (9) (1) (1) (9) () (5) (17) (5) (17) () (51) 5.5 kg IPL 1.5-6/96-1½ 1 15 / / 1 / 9 / 5¼ / 9 / 1 9 / 1 15 / / 5 7 / 5. lbs () (75) (9) (79) (9) (1) (1) (9) () (5) (17) (5) (17) () (51) 6. kg IPL /1-1½ 1 15 / / 1 / 9 / 5¼ / 9 / 1 9 / 1 15 / / 5 7 / 5. lbs () (75) (9) (79) (9) (1) (1) (9) () (5) (17) (5) (17) () (51) 6. kg Flange Dimensions n x d L Dimensions - Inches (mm) DN ØD Ød 1 Øk n x d L 1.5 ¾ 7 / ½ x 9 / (11) (7) (9) ( x 1) Ø d 1 k Ø D Ø TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] IPL 1.5-/ / / / / - IPL 1.5-6/ / 1. - / / 115 / - IPL / /. - / WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) Fax: (7) -955 Web: [email protected] Tel: (66) Fax: () Web: [email protected] Tel: Fax: Web: [email protected]
14 Wilo IPL 5 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz,5 ( Pole) 1 H[ft] Wilo-IPL -6/17- H[m] Wilo-IPL -/1-7 5 RPM - 6 Hz - North America Qmin Ø. Ø. Ø. IPL -6/17- IPL -5/- IPL -/1-5% 5% 6% 6.% 6.% 6.5% 6% 5% hp 5% 1 hp 1.5 hp 1 Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) NPSH [ft] Ø P [hp]. Ø. 1.5 Ø. 1. Ø..5 1 Q[l/s] NPSH [m] 1 P [kw] 1... Impeller Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems Approval Stamp WIL-SDS-IPL1-1-1
15 Dimensions & Weights a l 1 max* c 1/ Vent Plug x e lo f m x / UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x IPL -/1- ¼ 17 7 / ½ 1 / 5¼ ¾ 9 / 1 9 / 1 15 / 7 11½ 5¾ 1 / 5 7 / 65.7 lbs (5) () (5) () (1) (1) () (9) () (5) (17) (9) () () (56) 9. kg IPL -5/- ¼ 17 7 / ½ 1 / 5¼ ¾ 9 / 1 9 / 1 15 / 7 11½ 5¾ 1 / 5 7 / 66.1 lbs (5) () (5) () (1) (1) () (9) () (5) (17) (9) () () (56) kg IPL -6/17- ¼ 17 7 / ½ 1 / 5¼ ¾ 9 / 1 9 / 1 15 / 7 11½ 5¾ 1 / 5 7 / 77. lbs (5) () (5) () (1) (1) () (9) () (5) (17) (9) () () (56) 5 kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L 5¼ 7 / ½ x 9 / (1) (7) (1) ( x 1) n x dl TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] / / - IPL -/ / 1. - / / 115 / - IPL -5/ /. - / ø d1 ø k ø D 1 / / - IPL -6/ /.9 - / WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) Fax: (7) -955 Web: [email protected] Tel: (66) Fax: () Web: [email protected] Tel: Fax: Web: [email protected]
16 Wilo IPL.5 5 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz,5 ( Pole) H[ft] H[m] Wilo-IPL.5-65/7- Qmin Wilo-IPL.5-5/6-5 RPM - 6 Hz - North America Ø.5 5% 6% 5% 6% 6% 6% 6% 6% 5% % 5% hp NPSH [ft] 1 Ø. IPL.5-65/7- IPL.5-5/ % 69.5% hp Ø.5 1 NPSH [m] P [hp] P [kw].5 Ø Ø % Q[l/s] Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated ½ with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems Approval Stamp WIL-SDS-IPL1-1-1
![5. 1.5 Ø. 1. 1.5 5 1 15 5 7% Q[l/s] Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute](/docs-images/46/21652099/images/page_16.jpg "Impeller Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated ½ with ¼ pressure")
17 Dimensions & Weights a l 1 max* c 1/ Vent Plug x e f lo m x ½ 1 UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia a l 1 b 1 b b bmax c e f g l m p x IPL.5-5/6- ½ 5 / 1 7 / 11 / 5¾ 9 5 / 1 / 1 9 / 1 15 / 7 1½ 6¾ / 91. lbs (65) (9) (5) (99) (119) () (5) (1) () (5) (17) () (171) (5) (67) 1. kg IPL.5-65/7- ½ 5 / 1 7 / 11 / 5¾ 9 5 / 1 / 1 9 / 1 15 / 7 1½ 6¾ / 6.7 lbs (65) (9) (5) (99) (119) () (5) (1) () (5) (17) () (171) (5) (67) 9. kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L / 5½ X ¾ (17) (11) (1) ( x 19) n x dl TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] 1 / / - IPL.5-5/ /.9 - / IPL.5-65/ / - / ø d1 ø k ø D WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) Fax: (7) -955 Web: [email protected] Tel: (66) Fax: () Web: [email protected] Tel: Fax: Web: [email protected]
18 Wilo IPL 5 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM IPL -56/- 6Hz,5 ( Pole) 6 1 H[ft] H[m] Wilo-IPL -56/- 5 RPM - 6 Hz - North America 6 Qmin 1 5 Ø.1 IPL -56/- 6% 7% 7% 7.7% 7% 7% Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated with ¼ pressure gauge tappings 15 PSI (1 Bar) 1 6% hp 6 Materials of Construction Pump volute Cast Iron Impeller Engineered composite Shaft L stainless steel stub shaft NPSH [ft] Ø P [hp] Ø Q[l/s] NPSH [m] 1 P [kw] Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems Approval Stamp WIL-SDS-IPL1-1-1
19 Dimensions & Weights a l 1 max* c 1/ Vent Plug x e f lo m x ½ 1 UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia a l 1 b 1 b b bmax c e f g l m p x 15 / 1 1 / ¼ 5 5 / 5¾ / 1 9 / / / 97.7 lbs IPL -56/- () (1) (6) (1) (15) () (5) (15) () (55) (17) (56) (17) (5) (69). kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L 7½ 5 1 / 6 X ¾ (191) (1) (15.) ( x 19) n x dl TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V].5 - / - / 6 IPL -56/- 575 ø d1 ø k ø D WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) Fax: (7) -955 Web: [email protected] Tel: (66) Fax: () Web: [email protected] Tel: Fax: Web: [email protected]
![kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L 7½ 5 1 / 6 X ¾ (191) (1) (15.) ( x 19) n x dl TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V].](/docs-images/46/21652099/images/page_19.jpg "5 - / - / 6 IPL -56/- 575 ø d1 ø k ø D WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.")
Multistage high-pressure multistage centrifugal pumps
Series description Wilo-Helix V 2 4 6 8 Wilo-Helix V 19-27 7 6 6 Hz - North America 22 2 18 5 16 14 4 12 3 1 V 1 V 19 V 27 8 2 6 1 5 1 15 2 25 3 4 2 35Q[US gpm] H[ft] H[m] Design Vertical multi-stage,
1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]
![1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]](/thumbs/40/20910486.jpg "1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]")
Product review: Range: Wilo-Star....... Star F Star Star Star F Star Star FX [m /h] Wilo-Star Cast iron body Hz [US gpm].......... [m /h] Wilo-Star Bronze body 9 Hz [US gpm] Star Star Star Star Star BF
Heating, air-conditioning, cooling
Series description Design High efficiency, single stage, low pressure, inline centrifugal pump Supplied with EC motor and electronic duty adaptation Available in glanded construction, mechanical shaft
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
CRK 2-130 A-W-A-BUBV 85805906
GRUNDFOS DATA BOOKLET CRK 2-13 A-W-A-BUBV 858596 Grundfos Pump 497113 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/497113/crk-2-13-13-a-w-a-auuv.html
Wilo Building Services - Price Book
Pioneering for You 2016 - United States - 60 Hz. Wilo - Price Book Pumps and pump systems for HVAC, pressure boosting, water supply and sump & sewage. Effective - January 1, 2016 20-57-002-1215 FSA-066
TECHNICAL BROCHURE B5-33GB 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB GB, 7GB, 1GB, 18GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
Series description: Wilo-Yonos MAXO
16 88 / Series description: Wilo-Yonos MAXO /,5-1 1 Wilo-Yonos MAXO 1 5/,5-1 8 6 /,5-5/3/,5-7 5/3/,5-1 /5/,5-8 65/,5-9 5/,5-9 5/3/,5-1 5 1 15 5 Design Glandless circulation pump with threaded connection
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
Series description: Wilo-Yonos MAXO-D
ATAC Solutions LTD / 1 / Series description: 1 /,5-1 1 5/,5-1 3/,5-7 3 3 5/ /, / 11 5-,5-,5-9 Design Glandless circulation pump with threaded connection or flange connection, EC motor with automatic power
Product Catalogue. ETX, Stainless steel threaded centrifugal pumps, 50 Hz
Product Catalogue ETX, Stainless steel threaded centrifugal pumps, Hz Contents Introduction... ETX... Choosing the right pump There are a wide range of pumps to select from. In order to find the right
dp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
Series description: Wilo-Drain TC 40
Series description: Wilo-Drain TC 40 H[m] Wilo-Drain TC 40 10 8 6 4 2 TC 40/8 TC 40/10 0 0 2 4 6 8 10 12 14 Q[m³/h] Design Submersible sewage pump Application Pumping heavily contaminated fluids for House/site
TECHNICAL BROCHURE BAQUABII. * Available up to 100 GPM systems. Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS
TECHNICAL BROCHURE BAQUABII * Available up to 1 GPM systems Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS FEATURES The AB2 variable speed pump controller and complete booster package kits, provide
CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
EVAC ONLINEVAC TECHNICAL DATA 6547655 EVAC ONLINEVAC 16, 24 V DC. Required maintenance space 700 mm. Required maintenance space 200 mm 360 Ø13
Date: 9 Apr 202 Doc. 002967-6547655 6, 24 V DC Ø3 360 Required maintenance 990±0 960 40 040 20 890 350 (P/N 546664) 95±5 67±5 Vacuum sensor G /4 88±5 INLET DN40 943 Connection Frame: Steel S235 EN 0025
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
VM, VMC, VMN. Vertical Multistage Centrifugal Pump, 60Hz
VM, VMC, VMN Vertical Multistage Centrifugal Pump, 60Hz Approvals CERTIFICATE IQNet and SQS hereby certify that the organisation Swiss Pump Company AG 3645 Thun-Gwatt Switzerland Whole Company Design,
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
SUPER-TITAN. Split-case pumps with power, performance and reliability for a world of applications
SUPER-TITAN Split-case pumps with power, performance and reliability for a world of applications The Prestige. The Performance. SUPER-TITAN PUMPS Features The TKL Super-Titan pump makes a significant contribution
Wilo SP Series Submersible Sump Pumps ECS. ECS19-15.25 ECS22-15.33 ECS24-15.50 Installation and operating instructions
Wilo SP Series Submersible Sump Pumps ECS ECS19-15.25 ECS22-15.33 ECS24-15.50 Installation and operating instructions PREINSTALLATION CHECK Inspect this pump before it is used. Occasionally, pumps can
JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS.
Redi-Flo2, 2 Environmental Submersible Pumps MP1 Submittal Data QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS Technical Data Motor Type: Water-Filled, variable speed submersible Maximum Fluid
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
SVA SIGMA PUMPY HRANICE SELF PRIMING PUMPS 426 2.98 16.05
SIGMA PUMPY HRANICE SELF PRIMING PUMPS SVA SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +40 581 661 111, fax: +40 581 60 587 Email: [email protected] 46.98 16.05 Applications
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: [email protected]
Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
Max. Head (m) LVR3-7-220V 3 32 5 44 0,55 10 50Hz ~ 220 V Oval Flange G1. LVR3-7-380V 3 32 5 44 0,55 10 50Hz ~ 380 V Oval Flange G1
Description NordicFlow s keep the system pressurized during normal conditions and prevent unnecessary activation of the main pump. They have compact design, high efficiency, low noise, reliable sealing
Series 1510 Centrifugal Pumps Technical Bulletin. Bulletin B-207G Bell & Gossett
Bulletin B-7G Bell & Gossett Series 1 Centrifugal Pumps Technical Bulletin For hydronic heating and cooling systems, industrial, pressure boosting and general pumping applications High efficiency, low
SIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
Goulds Water Technology
APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼" NPT suction, 1" NPT discharge, 1" NPT drive (pressure) Pressure switch: AS4 preset
Catalogue Wilo- Stratos PARA
Heating, ir Condition, Cooling, Geothermal heat, Solar heat 25-50W 100W 200W Catalogue Wilo- Stratos PR Wilo-Stratos PR 15/1-5; 20/1-5; 25/1-5; 30/1-5 Wilo-Stratos PR 15/1-7; 20/1-7; 25/1-7; 30/1-7 Wilo-Stratos
Series description: Wilo-Star-Z
H[m] Series description: Wilo-Star-Z 4 3 Wilo-Star-Z Star-Z 2/5 2/4 2 1 Star St ar- Z1 5T Design Glandless circulation pump with threaded connection Application Potable water circulation systems in industry
HVAC HANDBOOK HV AC LPH H B001
HVAC HANDBOOK We endeavour to become the most responsible, the most future-oriented and first of all the most innovative manufacturer in the world Being responsible is our foundation Thinking ahead makes
PRO-CLEAN. Technical Description. Specifications. Space-saving design with minimum heat loss (melamine resin insulation)
PRO-CLEAN Product description Specifications Technical Description Max. backup operating pressure Max. service water operating pressure 3 bar 6 bar Hot water connection " female thread* V4A (no..4) Cold
Horizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
Max primary circuit temperature 90ºC Max primary circuit temp. 90ºC Max secondary circuit temperature 45ºC Max secondary circuit temp.
EGLISH 1 Product description exchanger equipped with an electronic control unit and circulation pump for the primary circuit. All Aqua-Mex variants can be ordered with an interior coil of either titanium
FI Frame-Mounted End Suction Pumps
Water Circulation Pumps & Circulators FI Frame-Mounted End Suction Pumps FI Series Pumps provide the ultimate in reliability and ease of installation for heating, air conditioning, pressure boosting, cooling
Transformer oil cooler ALFA A02
A02 Transformer oil cooler ALFA Transformer oil cooler ALFA The transformer oil cooler ALFA is used to cool power transformers by means of forced air and oil flow. The oil in the cooler is circulated using
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10
The Company. QUALITY WHICH REDUCES PUMPING COSTS For over 45 years, PAPANTONATOS S.A. has focused on the customer s design,
The Company QUALITY WHICH REDUCES PUMPING COSTS For over 45 years, PAPANTONATOS S.A. has focused on the customer s design, manufacturing and service needs in the field of submersible pumps. Our engineering
Eurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
300 Series PA Pump and Cooler Assemblies
Type 300 Series PA Sizes 300 thru 370 (Page 1 of 9) 300 Series PA Pump and Cooler Assemblies Pump and Cooler Assemblies with Air/Oil Heat Exchanger When compact gear drives require assistance to dissipate
IN series. Centrifugal pumps standardized to DIN-24255
IN series Centrifugal pumps standardized to DIN-24255 DESCRIPTION The new standardized IN series are single-stage horizontal centrifugal pumps, with axial suction and radial discharge, buit to Standard
Operators manual Basic water heater
Operators manual Basic water heater Isotemp Basic water heater has been designed and produced to ensure that your water heater will give long and trouble free operation for many years. It is important,
KTZ32.2-51. data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
An SPX Process Equipment Operation. Universal II Industrial Series Rotary Positive Displacement ECP Pumps
An SPX Process Equipment Operation Universal II Industrial Series Rotary Positive Displacement ECP Pumps New levels of performance. Reduced operational and maintenance costs. For more than half a century,
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages 2448LSG_P1 R4/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division
Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12
HORIZONTAL PUMPING SYSTEM
HORIZONTAL PUMPING SYSTEM BORETS U.S. INC. PERFORMANCE TECHNOLOGY INNOVATION Horizontal Pumping System What is HPS? HPS classification, Pumps, Stages, Impellers, Curves/Performance, Components Why use
TRANSLATION OF THE ORIGINAL MANUAL
l FLOWMAX PUMPS 08-120 F / 08-120 FT 16-120 F / 16-120 FT TECHNICAL FEATURES TRANSLATION OF THE ORIGINAL MANUAL IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents
SIGMA GROUP a. s. Divize průmyslová čerpadla
SIGMA GROUP a. s. Divize průmyslová čerpadla SIGMA GROUP a. s. INDUSTRIAL PUMP DIVISION Jana Sigmunda 79, 783 50 LUTÍN SEWAGE PUMPS NFPH, NFVH, NFJH, NFRH, NFPV, NFVV, NFJV, NFRV, NFPW NFVW Tel.: +420
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
Submersible pumps Grundfos With top exit Mop sump pomps Simer en City With top exit Submersible pumps Homa Submersible pumps DAB
Submersible pumps Grundfos With top exit Mop sump pomps Simer en City With top exit Submersible pumps Homa Submersible pumps DAB Grunfos KP sump pump completely made of stainless steel.. Very effective
BASIS RANGE TMB SERIES
BASIS RANGE SERIES magnetic driven pumps BASIS The pumps belong to Argal s BASIS range and feature, single stage, centrifugal impeller and magnetic drive. The range of pumps includes five models to deliver
MAGNETIC DRIVE PUMPS M35 TO M200 RANGE
032012 MAGNETIC DRIVE PUMPS APPLICATIONS : surface treatment, transfer, pumping of chemicals water treatment paper industry agriculture agribusiness cosmetics industry salt water metallurgy France SIEEC
Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
GRUNDFOS INDUSTRY. Grundfos Immersible Pumps
GRUNDFOS INDUSTRY Grundfos immersible pumps a complete and versatile range Universal flange connctions DIN JEM ANSI JIS Plug connector (Harting) () () Suitable for a variety of industrial applications
ICQ Series - square centrifugal
product ICQ Square Centrifugal (TEFC) dimensions mm 280-710 poles & duty 4-8 / up to 4,500 L/s application High performance centrifugal fans for medium to high pressure ducted systems. ICQ Series The ICQ
SENTRA SERIES WATER UNITS. 30 to 300 F Process Temperatures. 1/2 to 7.5 HP Centrifugal Pumps (20-100 GPM) 10 to 34 KW Stainless Steel Heaters
Temperature Control Units Water & Oil - 00 F Portable Chillers Air & Water-Cooled 0-70 F Central Chillers Air & Water-Cooled Packages & Modules 0-70 F Pump Tank Stations Chilled or Tower Water 00-00 gallons
5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
WATER pressure. Issue 3 / 2014. Clear water pumps for domestic and commercial applications
Issue 3 / 214 WATER pressure PUMPS AND washdown transfer pumps Clear water pumps for domestic and commercial applications Email: [email protected] Web: www.dlmwallace.co.nz Auckland: Maurice Road,
ECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
FULL PRODUCT GUIDE. performance quality service trust
FULL PRODUCT GUIDE performance quality service trust Vertical Turbine, Lineshaft & Submersible Pumps 6 & Larger Delivering Vertical Turbine Pump Reliability, Quality and Service Since 1969 Pump Type 6-30
CE6500 Energy Recovery Ventilator
ADVANCED COMMERCIAL Energy Recovery Ventilator PRODUCT SPECIFICATIONS & TECHNICAL DATA Features NOMINAL CAPACITY 5500-7000 CFM CASING Double-wall cabinet White exterior paint, -gauge galvanized steel -gauge
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
DODGE USAF 200/300 Direct Mount Pillow Block Bearings
DODGE USAF 200/300 Direct Mount Pillow Block Bearings These instructions must be read thoroughly before installation or operation. WARNING: To ensure that drive is not unexpectedly started, turn off and
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
Heavy Duty Industrial Air Compressors
HEAVY DUTY SERIES - VERTICAL TANK MOUNTED All units mounted on air receivers rated at 200 psi and CRN approved for Canada. All units may be ordered with magnetic starter (Starter supplied loose). All units
sealed close coupled pumps
sealed close coupled pumps centrifugal self-priming 1 - and are different configurations of the same range of centrifugal axle pumps, self-priming which offers reliability in use. Specifically designed
Ergo-Pro Single Line Solar Station Installation and Operating Instructions
Rp 3/4 Ergo-Pro Single Line Solar Station Installation and Operating Instructions Item No Pump type 677.21.70 WILO ST 15/6 13 2 4 11 Technical Specifications Max. operating pressure: 6 bar Max. operating
Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps.
5 Hz PUMP HANDBOOK Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps. You will find an overview of all Grindex pumps with
FLEXCON EXPANSION VESSELS. Flamco FLEXCON 2-80. Flexcon. Expansion vessels FLEXCON 110 1000 FLEXCON M. Flamco FLEXCON V-B.
FLEXCON EXPANSION VESSELS Flamco 1 Flexcon Expansion vessels FLEXCON 2-80 FLEXCON 110 1000 FLEXCON M Flamco FLEXCON V- 2007 edition / UK Flamco Flexcon the first name in expansion vessels Flamco has over
Butterfly Valves PN 6/10/16 for flanged connection
4 136 ACVATIX Butterfly Valves PN 6/10/16 for flanged connection tight-closing VKF46.. VKF46..TS Grey cast iron housing EN-GJL-250 (to DN 300) nodular cast iron housing EN-GJS-400-15 (from DN 350) DN 40
Thermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVI is self-acting thermostatic actuator primarily for use for temperature control
The conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
Electric Pumps Catalogue
Electric Pumps Catalogue Premier supplier of water equipment Pentair is a diversified operating company headquartered in Minnesota. Its Water Group is a global leader in providing innovative products
HEAT INTERFACE UNITS (Modular)
HEAT INTERFACE UNITS The Rhico T Fire Modular is probably the most versatile HIU available, the basic unit is a indirect heating only module incorporating a circulation pump on the secondary circuit. (A
MOLECULAR DRAG PUMPS MDP SERIES
MOLECULAR DRAG PUMPS MDP SERIES MOLECULAR DRAG PUMPS MDP SERIES If you need: to replace a rotary vane pump with a dry pump for an application at 10-3 a turbopump that can operate up to 10 a pump that can
SANITARY & WASTE WATER PUMPING SYSTEMS. Now you can install kitchen, bathroom, laundry and commercial facilities almost anywhere.
SANITARY & WASTE WATER PUMPING SYSTEMS Now you can install kitchen, bathroom, laundry and commercial facilities almost anywhere. Wallace Pumps solve all those waste disposal problems, big or small, with
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR AT_-1/ Hz DN1 3 r/min min H G 1/ G 1/ 17 11 3xM, Depth 1 1 Ø1 Ø1 xø19 7 3xØ1 9 17 1 xø1 17 1 kw A kg H OKN-13 E1 F19 7. (9). 9 OKN-13 C1 F19. (.) 11. 1 9 OKN-1 E1
MEMBRANE VACUUM MINI PUMPS
MEMBRANE VACUUM MINI PUMPS The mini pumps described in this page are membrane-type. They can be used both as vacuum pumps and compressors. In the latter version they can supply compressed air 100% oil-free
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
Flygt 3068, 50Hz. Technical Specification
Flygt 3068, 50Hz Technical Specification Table of Contents Table of Contents B-pump...2 Product description...2 Motor rating and performance curves...4 C-pump...6 Product description...6 Motor rating
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY TYPICAL APPLICATIONS Water supply Transfer and distribution from water systems Pressure boosting in apartment buildings
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SOLAR POWER MARKET. Concentrated Solar Thermal Power
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SOLAR POWER For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen
Flygt N-Pumps 3085, 3102 & 3127. For reliable and efficient wastewater handling
Flygt N-Pumps 3085, 3102 & 3127 For reliable and efficient wastewater handling The Concept Flygt N-Pump series Reduced pumping efficiency, high energy and maintenance costs shouldn t be a fact of life
AC METRIC (IEC) MOTORS THREE PHASE
AC METRIC MOTORS These high efficiency motors meet North American performance standards and EPACT energy efficiency mandates, and have.5 service factors. Typically used for replacement on machine tools,
VIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Issue G Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
Tsurumi BER. Submersible Ejectors
Tsurumi BER 400V 50Hz Submersible Ejectors This submersible ejector is composed of a B type pump and a venturi with diffusor trumpet. The large flow from the pump, first, at high speed, draws and mixes
Direct steam injection humidifiers
Direct steam injection humidifiers Direct steam injection gives quality control of air humidity. Research and development in separation, the use of lightweight stainless steel combined a constant temperature
Requirements for drilling mud agitator specifications. Mud agitator combines compact design with high torque performance
High capacity drilling mud solids control equipment manufacturer- http://www.china-kosun.com/ Requirements for drilling mud agitator specifications Mud agitator combines compact design with high torque
SIR 900-1100. INTERMEDIATE LIFTING STATIONS Communal waste water 50 Hz OPERATING LIMITS APPLICATIONS. AdVANTAGES
OPERATING LIMITS Useful volume up to : L 9 L Ambient temperature : to + C Max.fluid temperature : + C* passing blade at : mm Ø Inlet dia. : mm DN Ø Outlet dia. : / Ø Vent dia.: mm Ø Cable passage : mm
RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: [email protected] 426
That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance
![That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance](/thumbs/30/13966838.jpg "That s E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250. Training reality with industrial performance")
[ That s ] E[M]CONOMY: Not just training: Real Action! CONCEPT TURN 250 Training reality with industrial performance Concept TURN 250 Uncompromising quality right down to the last bolt, at an unbeatable
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
Energy Efficient Solutions in HVAC Pumping
Energy Efficient Solutions in HVAC Pumping Cost-effective quality. Flexibility. Interchangeability. Expert applications support. The fastest delivery in the marketplace for standard units. And GREEN. That
SRA-125/SRAX-125 Double-Rail Lift-Out Rail System Installation & Service Manual with Parts List
SRA-125/SRAX-125 Double-Rail Lift-Out Rail System Installation & Service Manual with Parts List For MG, WG, WGL, and Grinder Pumps for Effluent & Sewage CAUTION! Read these safety warnings first before