compressed air conditioning accessories. one stop shop process reliable efficient economical high degree of reusability

Transcription

1 Screwdriving technology Automation Air motors Air tools compressed air conditioning and accessories one stop shop process reliable efficient economical high degree of reusability DEPRAG offers a comprehensive programme of equipment as well as complementary accessories. From the complete layout of your manual work station for manual production tasks to compressed air preparation every option from one source - DEPRAG. D 40 E

2 overview Air connection example Page Hoses, connections Page 4 / 5 Couplers, plugs, seal ring, hose nozzles Page 6 Claw couplers, safety couplers, hose connectors, hose clamps, connector plugs Page 7 Maintenance unit and filter-regulator, filter and oiler, pressure regulators, point-of-use oiler Page 8 Special oil, lubrication grease, shut-off-valves, ball valves, brass seal, blow guns, pressure-distributor Page 9 Exhaust filter, flow sensor, screw holder, perforated plates, injector, vacuum pump, vacuum hose Page 0 Measuring technology, tachometer Page 2

3 air connection example Pneumatic machine Optional equipment (D40E) Plug with fem. thread Coupler with hose barb Pressure hose Plug with hose barb Coupler with male thread Distributor Double nipple Maintenance unit

4 hoses Pressure Hose (Plastic) Pressure Hose (Rubber) Pressure hoses, oil resistant I.D. Plastic Comment I.D. Rubber 2.9 / 7 /64 4. / / PE-tube / /8 5 / / black 4 / 5 /2 6 / / / /4 6 / 5 / PVC with fabric 4 / 5 /2 6.2 / / / /8 9 / / supplem. black 6 / /4 8.2 / 2 / / /2 2 / 29 / / /4 2 / / / PVC 5 /8 25 / / /8 6 / 5 / / with fabric /4 29 / 5 / / /2 2 / / / 9 / supplement, 9 / / 5 /8 24 / 5 / transparent 9 / /4 29 / 5 / Comment with fabric supplement, black Pressure spiralhoses, Polyamid oil-resistant D L D Pressure spiralhose L Hose I.D. D L-work length m / ft. L-fully extend. max. m / ft. Connection 4 / 5 /2 2 / / / / 0.8 without connections / /4 65 / 2 9 /6-2.5 / / 6.4 Thread male double-sided / /8 0 / 5 / / / 24.6 Thread male rotatable connection A / /2 90 / 7 / / /.5 Thread /2 male and anti A / /2 90 / 7 / / / 24.6 Thread /2 male kink protection A for NANOMAT and MICROMAT Screwdriver 4 / 5 /2 2 / / / / 9.8 Plug / Coupler with kink guard M for MICROMAT Screwdriver 4 / 5 /2 2 / / / / 9.8 for MINIMAT Screwdriver (motor size ) Plug / Coupler 8200 Plug / Coupler D G Plug / 4 / 5 /2 2 / / / / 9.8 Coupler 8252 with kink guard L for MINIMAT Screwdriver (motor size and 2) 6 / /4 65 / 2 9 /6-2.5 / / 6.4 Plug 224/Coupler E Spiralschlauch for MINIMAT Screwdriver (motor size 2.5 and ) 6 / /4 65 / 2 9 /6-2.5 / / 6.4 Plug 224/Coupler F Spiralhose antistatic for MINIMAT-ESD Screwdriver (motor size, 2, 2.5 and ) 7.5 / 9 /64 65 / 2 9 / / / 9.8 Thread male P Exhaust Hoses 806 to 9870 A and A 0628 A Exhaust Hoses Motor Size Length Remark m / ft. for NANOMAT Screwdrivers, straight 00 / A for MICROMAT / MINIMAT Screwdrivers, straight 0 / / A 2 / A*) / / A for MINIMAT Slip clutch Screwdrivers, pistol grip 2 / 2.5 / 0.75 / 2.5 with air hose, length 2 m/6.6 ft A for MINIMAT Screwdrivers, angle-head design 2 / A*) for Slip clutch Screwdrivers, straight/angle-head design 2 / A *) not applicable for F-Screwdrivers 4

5 hoses Externally calibrated synthetic hoses I.D. mm/ in. Comment 2 / 0.08 / a x 0.5 PUN black 2.5 / 0. 4 / a x 0.75 PUN natural 2.5 / 0. 4 / a x 0.75 PUN black 4 / / a x PUN natural 4 / / a x PUN silver 4 / / a x PUN black 5.5 / / a x.25 PUN silver 5.5 / / a x.25 PUN natural 7 / / a x.5 PUN black 7 / / a x.5 PUN silver 8 / 0. 2 / a x 2 PUN silver Synthetic hose, ESD conductive I.D. mm/ in. Comment 4 / / a x ESD 5 / / a x.5 ESD 6.5 / / a x.75 ESD 8 / 0. 2 / a x 2 ESD Connections for externally calibrated hoses Straight design with external thread and external hex Straight design with external thread and internal hex Straight design with internal thread and external hex for hose Connection Comment for hose Connection Comment for hose Connection Comment / 0.2 M / 0.2 M / 0.2 M / 0.6 M / 0.6 M / 0.6 M5 824 / 0.2 M / 0.2 M / / 0.2 M / 0.6 M / / / 0.2 M ESD capable 8 / / 0. ¼ / 0.2 M / 0.6 ¼ / 0. ¼ 8408 ESD capable 4 / / 0.2 ¼ / 0.9 ¼ / / 0. ¼ / 0.9 ¼ ESD capable 8 / / 0.9 ¼ ESD capable 0 / 0.9 ¼ / 0.2 ¼ / 0.47 ½ 8099 ESD capable 2 / 0.47 ¼ / 0. ¼ / 0.62 ½ 8002 ESD capable 2 / 0.47 ¼ 8080 ESD capable 0 / 0.9 ¼ / 0.62 ½ / 0.47 ½ / 0.62 ½ angle design with external thread and external hex for hose Connection Comment 90 angle design with internal thread and external hex for hose Connection Comment / 0.2 M / / 0.6 M / / 0.2 M / 0.2 ¼ / 0.6 M / 0. ¼ / 0.2 M / 0. ¼ / / 0.9 ¼ / / 0.9 ¼ / / / / 0. ¼ / 0.9 ¼ / 0.9 ½ / 0.47 ½ / 0.62 ½

6 Couplers, plugs, seal ring, hose nozzles Plugs with female thread Plugs with male thread Coupler with hose barb Thread Part. no. Thread Part. no. for hose I.D. mm/in. Part. no. M M nominal size 2.7 mm air flow approx. 200 l/min / nominal size 5 mm air flow approx. 600 l/min nominal size 7.2 mm air flow approx. 000 l/min Couplers with female thread Couplers with male thread Plugs with hose barb / /8 4 / 5 /2 4 / 5 /2 6-7 / /4 6-7 (90 ) /4 6-7 / /4 0 / /8 2- / / Thread Part. no. Thread Part. no. Thread Part. no. nominal size 2.7 mm air flow approx. 200 l/min nominal size 5 mm air flow approx. 600 l/min M nominal size 2.7 mm air flow approx. 200 l/min nominal size 5 mm air flow approx. 600 l/min M / / for kink guard / 5 /2 6-7 / / nominal size 7.2 mm air flow approx. 000 l/min / nominal size 7.2 mm air flow approx. 000 l/min / / 5 /2 6-7 / /4 0 / /8 2- / / Seal Ring hard PVC for thread / Hose Nozzle male thread Hose Nozzle w/connector nut-female thread Hose Nozzle - male thread Hose Nozzle - w/connector nut for Thread Hose I.D. 6-7 / / / / / / / / / / / /8 / / / / /2 / / / / 5 / / 5 /8 / / 5 / / /4 / / / for Hose I.D. 6-7 / /4 6-7 / /4 0 / /8 0 / /8 2- / /2 5-6 / 5 /8 9 / /4 Thread Nozzle Nut incl / /2 round 2 mm x / 5 /8 round 2 mm x / /4 round 2 mm x

7 couplers, hose connectors, clamps, connector plug Claw Couplers male thread Claw Coupler O-ring (Spare part) Thread / Claw Couplers female thread Claw Coupler O-ring (Spare part) Thread / Claw Coupler male thread Safety Couplers with hose end Safety Coupler O-ring for Hose I.D. (Spare part) 0 / / / / / 5 / / / / 8044 Claws can be easily coupled, when nut is untightened. By tightening of nut, complete sealing is achieved. Claw Couplers with hose end Claw Coupler O-ring for Hose I.D. (Spare part) 6-7 / / / / / / / 5 / / / / Claw Coupler female thread Safety Coupler Claw Coupler Hose Connector for Hose I.D. 0 / / / / / 5 / / / O-Ring Hose Connector Hose Clamps steel, zinc plated Hose Clamps cast iron, zinc plated for Hose I.D. of Hose Bracket range dia. for Hose I.D. of Hose Hose Clamp / 7 /2- /4-6 / 7 /6-5 /8 8-6 / 5 /6-5 / / /8- /2 9-2 / /4-29 / / 5 / / 5 /8- / / - 5 / / /6- / / 9 / 7 / / / / /2-5 / / 7 /8-5 / / / / /2- / / 2-40 / /4-9 / Hose Clamp Connector Plug Male Size Tool Male Thread Connector /2 round 2 mm x 4006 round 2 mm x 4005 Connector Plug 7

8 maintenance unit, Filter regulator, Filter, oiler, pressure regulators, point-of-use oiler Maintenance Unit and Filter-Regulator Maintenance Unit - G Maintenance Unit 570 A Thread Size Air Flow m /min/cfm at 6 bar / 85 PSI Complete Portable Filter Oiler/Filter Oiler/Filter with without with without pressure pressure pressure pressure regulator regulator regulator regulator f / A A 5754 A A /2 f / A A 5749 A A f / A A 575 A A f / A 8279 A 5752 A /2 f 5-6 / A with connection coupling for injector (screw suction) f / A 570 B Application: The oiler is especially suitable for the lubrication of pneumatic tools with unstable air consumption. In contrast to standard oilers, above oiler will keep the mixture ratio of oil to air constant, because of the integrated compensation equipment. The mixture ratio is adjustable with the fill screw. Refilling can be done without interruption to the air flow. The filter removes solid components, oil and water, which are present in the compressed air. It also prevents pollution of the air tool and guards against functional breakdown. The filter-insert is washable. If air pressure is above 7 bar/99 PSI, it is recommended to mount a regulator between oiler and filter. Filter and Oiler Thread Air Flow Filter Oiler Size m /min/cfm at 6 bar / 85 PSI f / A ) A ) /2 f / A 2) A 2) f / A ) 8256 A ) f / A ) 8275 A ) /2 f 5-6 / A 8050 A ) set of connection fittings for above A 2) set of connection fittings for above A ) set of connection fittings for above 8277 A Portable Oiler/Filter Pressure Regulator Pressure Regulators Thread Max. Air Flow maximum maximum Part No Size m /min/cfm Inlet Pressure Outlet Pressure at 6 bar / 85 PSI bar / PSI bar / PSI f.5 / 5 6 / / A /2 f 5 / 76 6 / / A f 6. / / / A f 6. / / / A Point-Of-Use Oiler Thread Number Comment of Connections A B C D E F Very accurate point-of-use system (-0 mm per impulse) mainly for screwdrivers H The dosed quantity is not adjustable I Dosed quantity per impulse: 5 mm Point-Of-Use-Oiler With our point-of-use oiler an optimum lifespan with minimum oil consumption can be achieved. At the same time the exhaust air will be oil-free. 8

9 oil, lubrication grease, shut-off-valves, ball valves, brass seal, blow gun, distributor Special oil DEPRAGOL for Air Tools Content Viscosity liter / gal / E 22 mm/ 5 / F at 40 C 0 / G Characteristics: Free of resin and acid, humidity binding, with active substance combination for long term rust protection. Shut-Off-Valves Lubrication Grease Content 00 g / 0.22 lbs kg / 2.2 lbs Special lubrication grease for gearing in DEPRAG screwdrivers DEPRAGOL female thread Single Valve Double Valve Single Shut-Off-Valve Double Shut-Off-Valve Ball Valves female thread / / Brass Seal (spare part for shut-off-valves and three-way-pieces) Description Metal Sleeve Hose Ring Lock Screw Ball Valve Blow Gun, Aluminium, with Hose Nozzle Nozzle standard Nozzle silenced Nozzle silenced with safety umbrella Noiselevel at 6 bar / 85 PSI for Pistolgrip Straight Pistolgrip Straight Hose i.d. Aluminium Aluminium db (A) db (A) 6-7 / / / / / / / / / / / / / / / / / / Blow Gun Pistolgrip Blow Gun Straight Lock Screw Pressure-Distributor Input A Distributor Output B Double Nipple Lock Screw Seal Ring /2 x /2" ( /2 - /2 ) 8282 ( /2 ) 840 ( /2 ) /2 9 x ( /2 - /2 ) 828 ( ) 8286 ( ) Distributor Double Nipple 9

10 exhaust filter, flow sensor, screw holder, perforated plates, Injector, Vacuum pump, Vacuum hose Exhaust Filter Exhaust filter Distributor Air Flow m /min/cfm *) *) expanded air Thread Size Screwdrivers Motor Size Number of Screwdrivers without Distributor / 5 /2 f / 70 f 8048 with Distributor / 5 /2 f 00/0 / 2 / 544 A / B / C 2 / 70 /2 f 0 4 / 5 / 6 / 7 / 8 / 9 / D / E / F / G / H / I / K / 5 /2 f / A / B 2 / 70 /2 f / 4 / 5 / 6 / 7 / 8 / C / D / E / F / G / H / I / 5 /2 f 2 / A / B 2 / 70 /2 f 2 / 4 / 5 / 6 / C / D / E / F / G / 5 /2 f 2.5 and 544 A 2 / 70 /2 f 2.5 and 2 / / B / C / D 2 / 70 /2 f 4 / 2 / 5444 A / B / C Flow sensor Flow sensor, with electr. Magnet switch, 24 VDC Motor Size Air Flow Air max. Switching Connecting Electr. of tool Connection Power Cable Length Connection m /min / cfm ma incl. Connector parts (nipple and coupling) 00/0 0.5 / 5. i Ø /.7 M8 x C /2 0.5 / 2. i Ø /.7 to be 6645 B 2.5// / 2 i Ø /.7 screwed on 6645 A without Connector parts or plugged on 0.8 / 28.2 f /.7 PNP/closing 997 A Perforated plates Screw holder Colour red blue A C Plastic container in different colours, adjustable, perforated plates for different screw dia., exchangeable. Perforated plates for Screw holder for screws Perforation Ø 2 / 5 / x 20 / /2 x 25 / / /2 x 5 / /8 x 9 /2 907 / /8 4 x 25 / 5 /2 x 6 / / 5 /2 5 x 20 / /64 x 25 / / /64 6 x 20 / 5 /64 x 25 / / 5 /64 7 x 20 / 9 /2 x 25 /2 902 Screw holder Injector Injector, Vacuum-Pump for screw suction Suction volume Vacuum Noise level Air consumption Motor l/min - cfm bar / PSI db (A) l/min - cfm kw / V / Hz Injector / A Doubleinjector / A Vacuum-Pump VP 00, oil free / /20/ A Injector must be used with vacuum interruption Vacuum Hose, plastic Vacuum-pump I.D. / /8 5 / /

11 measuring technology measuring technology Various torque transducers see leaflet D020E. Measurement devices for manual use for precise highly dynamic torque measurement see leaflet D022E. tachometer tachometer - part no The measuring instrument for the touch free speed recording with a light ray (measuring range rpm) and for the mechanical speed recording with measuring tip or measuring wheel (measuring range rpm). Additionally, speeds and lengths can be acquired mechanically. A measurement unit selection (metric/imperial) is possible. The storage function indicates the last measurement (MIN/MAX). The compact measuring instrument possesses a digital display and is powered by two.5 V Mignon batteries.

12 DEPRAG SCHULZ GMBH u. CO. P.O. Box 52, D-9220 Amberg, Germany Carl-Schulz-Platz, D Amberg Phone (+49) , Fax (+49) CERTIFIED AS PER DIN EN ISO 900 DEPRAG. All rights and technical alterations reserved Fri