NURSECALL SYSTEMS C-TEC DISABLED PERSONS TOILET ALARM KITS DISABLED PERSONS TOILET ALARMS/SINGLE ZONE CALL SYSTEM KITS

Transcription

1 NURSECALL SYSTEMS C-TEC DISABLED PERSONS TOILET ALARM KITS DISABLED PERSONS TOILET ALARMS/SINGLE ZONE CALL SYSTEM KITS Include everything required for a reliable and easy to install disabled persons toilet alarm system (except cable and fixings) NC951 Standard disabled persons toilet alarm kit, c/w NC942 call controller, NC807C ceiling pull, NC806CS overdoor light & sounder, NC809DBB reset point & sounder, NC949 disabled wc sticker NC951B Elite disabled persons toilet alarm kit c/w battery back-up c/w NC942B call controller, NC807C ceiling pull, NC806CS overdoor light & sounder, NC809DBB reset point & sounder, NC949 disabled wc sticker NC951/SS Stainless steel disabled persons toilet alarm kit c/w NC941/SS call controller, NC807C plastic ceiling pull, NC806CS/SS s/steel overdoor light & sounder, NC809DB/SS s/steel reset point & sounder, NC949 disabled wc sticker C-TEC 800 SERIES CALL SYSTEM SINGLE ZONE EMERGENCY INDICATOR PANELS C/W 12V PSU NC942 Single zone 140mA call controller c/w psu, reset/mute buttons & relay NC942B Single zone 140mA call controller c/w psu, reset/mute buttons, relay & on-board battery back-up NC941 Single zone 250mA double gang call controller, c/w psu & reset button NC941/SS Single zone 250mA double gang call controller, c/w psu & reset button (s/steel) NC941B Battery back-up kit for NC ZONE EMERGENCY INDICATOR PANELS C/W MUTE & RESET BUTTONS, REQUIRE 12V PSU NC944 Four zone double gang call controller NC930 12V 250mA PSU for up to two NC944s NC925B1 12V 1A PSU for up to three NC944s NC944/SS Four zone double gang call controller (s/steel) NC930/SS 12V 250mA PSU for up to two NC944/SS (s/steel) 10 TO 30 ZONE EMERGENCY INDICATOR PANELS C/W 12V PSU, BATTERY AND MUTE BUTTON NC812KE 10 zone Emergency master panel c/w PSU & battery NC822KE 20 zone Emergency master panel c/w PSU & battery NC832KE 30 zone Emergency master panel c/w PSU & battery Repeater panels and larger master panels available to order 10 TO 30 ZONE STANDARD INDICATOR PANELS C/W 12V PSU Can indicate standard calls only NC810K 10 zone Standard master panel c/w PSU NC820K 20 zone Standard master panel c/w PSU NC830K 30 zone Standard master panel c/w PSU Repeater panels and larger master panels available to order OVERDOOR LIGHTS AND SOUNDERS Can be used to increase call indication levels NC806C Overdoor light NC806C/SS Overdoor light (s/steel version) NC806CS Overdoor light with sounder NC806CS/SS Overdoor light with sounder (s/steel version) NC887D Switchable sounder NC888D Remote sounder STANDARD CALL POINTS, MONITORING POINTS & CEILING PULLS Can generate standard calls only NC802DB Standard call point, button reset c/w remote socket NC802DM Standard call point, magnetic reset c/w remote socket NC807C Ceiling pull unit, no on-board reset, no remote socket NC894DKB Monitoring point, button reset, no remote socket NC894DKM Monitoring point, magnetic reset, no remote socket 50

2 NURSECALL SYSTEMS (continued) EMERGENCY CALL POINTS Can generate standard and emergency calls NC802DEB-1/2 Emergency call point, button reset c/w remote socket NC802DEM Emergency call point, magnetic reset, with remote socket IP65 WATER RESISTANT ALERT POINTS Can be set up to generate standard or emergency calls (not both) NC802DEWM Water resistant master alert point, magnetic reset, no remote socket NC802DEWS Water resistant slave alert point, no on-board reset, no remote socket, max 10 per master NC802DESS IP69K sauna alert point (must be used as a slave to a NC802DEWM) STAINLESS STEEL ALERT CALL POINT Can be set up to generate standard or emergency calls (not both) NC802DEM/SS Stainless steel call point, magnetic reset, no remote socket INFRARED CALL POINTS AND CEILING RECEIVERS Generate standard and/or emergency calls when triggered by a suitable transmitter NC802DERB Infrared call point, button reset c/w remote socket NC802DERM Infrared call point, magnetic reset c/w remote socket NC302RXC Infrared master ceiling receiver, no on-board reset NC302RXCS Infrared slave ceiling receiver, max. 3 per master INFRARED TRANSMITTERS For triggering Infrared call points and ceiling receivers QT412RXA Mk2 transmitter, push/pull for emergency QT412RXCA Mk2 transmitter, push for call/pull for emergency QT424/1 Single way charging unit for NC412 range transmitter QT424/10 Ten way charging unit for NC412 range transmitters RESET POINTS Can be used to reset devices which do not have an on-board reset facility NC809DB Button reset point NC809DM Magnetic reset point NC899IRR Keyswitch reset point, for use with infra-red ceiling receivers NC809DBB Button reset point c/w sounder and braille label MAGNETIC RESET KEYS For use with all magnetic call points, monitoring points and reset points NC803M/10 Pack of 10 magnetic reset keys ANCILLARY CALLING DEVICES Generate standard calls via a call point s remote socket NC805C/6 1.8m (6ft) tail call lead NC805C/14 4.2m (14ft) tail call lead NC805D 1.2 to 3.6m (4 to 12ft) coiled tail call lead NC805P Hand/foot operated pneumatic pad (requires 1 x NC805AS) NC805AS Remote air switch for NC805P NC805MD Portable movement detector MISCELLANEOUS 800 SERIES DEVICES Generate standard calls via a call point s remote socket NC899KD Area isolator, can be used to isolate areas/zones NC884DE Emergency 5:1 input expander, can be used to provide area/zonal indication NC885 Standard 5:1 input expander, can be used to provide area/zonal indication NC889 Call latch module, can trigger a standard call from a n/o or n/c switch NC889ERM Multi-purpose call latch module, can trigger a standard and/or an emergency call from a n/o or n/c switch NC883D 12V relay unit, can be used to switch sirens, strobes, etc NC848/50 50 x anti-tamper screws NC947 Anti-tamper Allen key, for use with anti-tamper screws 51

3 C-CALL CALL/WAITING ROOM SYSTEMS C-TEC C-CALL WAITING ROOM CALL SYSTEM Attractive slimline indicator panels with personalised self-adhesive labels Available in self-resetting or manual reception reset formats Durable desk and wall mounting call pushes with call confirmation LEDs C-CALL SELF-RESETTING DISPLAY PANELS NC905KT 2 zone self-resetting display panel NC906KT 4 zone self-resetting display panel NC907KT 6 zone self-resetting display panel NC925C Double insulated PSU, one required per system Call/Waiting Room Systems C-CALL RECEPTION PANELS NC911K 10 zone reception panel NC921K 20 zone reception panel C-CALL MANUAL RESET RECEPTION PANELS NC912K-5 5 zone resettable reception panel c/w psu NC912K zone resettable reception panel c/w psu NC912K zone resettable reception panel c/w psu C-CALL CALL PUSHES, OVERDOOR LIGHTS AND REMOTE SOUNDERS NC917L Call push (latching or non-latching) NC915L Desk push/4ft lead (latching/non-latching), requires NC NC920 Wall socket, for use with NC915L desk push NC806C Overdoor light NC888D Remote sounder 52

4 ADDRESSABLE CALL SYSTEM C-TEC QUANTEC ADDRESSABLE CALL SYSTEM Multiple call levels - standard call, help required (assist), Full monitoring of all network devices emergency and optional infrared staff attack Staff presence, call accept, manual and automatic call divert facilities Up to 256 network devices per system New optional Quantec Surveyor software allows detailed data Quantec Controller is now programmable via a sophisticated analysis reports to be sent direct to a PCs desktop on criteria such upload/download PC program or by its front panel controls as longest calls, busiest shifts, average call response times, etc. Up to 45 custom place names per system (in addition to an Now with HTM2015 capability (requires specially designed extensive library of pre-loaded place names) third-party switch assemblies used in conjunction with our new Flexible call routing - allows the system to be configured to range of Quantec universal devices) suit a building s exact operational requirements QUANTEC CONTROLLERS, DISPLAYS, SOUNDERS AND OVERDOOR LIGHTS QT601-2 Quantec controller AFP385 Flush bezel for Quantec controller QT707 Quantec PC programming software c/w lead (Windows) NEW SAF m programming lead only NEW QT707S Quantec Surveyor Data Management Software c/w wall socket and lead QT603 Quantec network splitter (installation aid) QT608C Quantec corridor display, with controls QT606 Quantec overdoor light QT606A Quantec addressable overdoor light QT688 Quantec addressable sounder NEW QT688/2 Quantec high-output 82dB addressable sounder (with optional HTM2015 capability - requires QT423 configurator) QUANTEC CALL POINTS, MONITORING POINTS, CEILING PULLS, INFRARED CEILING RECEIVERS AND RADIO RECEIVERS The QT602 call points listed below include remote sockets. Magnetic reset call points & call points without remote sockets are also available QT602 Quantec call point, button reset QT602S Quantec call point, button reset with sounder QT602R Quantec call point, button reset with infrared receiver QT602RS Quantec call point, button reset with sounder & infrared receiver QT602D Quantec slave call point QT607 Quantec ceiling pull unit QT604 Quantec monitoring point, button reset QT302RX Quantec master infrared ceiling receiver QT302RXS Quantec slave infrared ceiling receiver QT422RX Quantec Mk2 radio receiver (compatible with QT412 range transmitters) QT422RXEA Quantec Mk2 radio receiver extension aerial QT421 Single gang monitored heartbeat plate (checks integrity of QT422RX radio receivers) QUANTEC UNIVERSAL DEVICES QT611 Quantec multi-purpose programmable device (unplated), allows third-party switch assemblies & indicators to be interfaced to Quantec NEW QT612 Quantec relay output device (unplated), a zone-specific relay output to trigger third-party strobes, sounders, auto-diallers, etc. NEW QT613 Quantec zonal indicator driver device (unplated), can be used to drive third-party LED indicating devices NEW QT614 Quantec bedhead light dimmer interface (unplated) QT423 Quantec configurator (required to program QT611/612/613/614 devices) QUANTEC DUAL ACTION INFRARED/RADIO TRANSMITTERS Can be used to remotely trigger compatible Quantec infrared receivers and Quantec radio receivers QT412RXA Mk2 Dual action infrared/radio transmitter (Configured for push for attack/pull for attack) QT412RXCA Mk2 Dual action infrared/radio transmitter (Configured for push for call/pull for attack) QT423 Configurator for QT412RXU QT424/1 Single way charging unit for QT412 range dual action transmitter QT424/10 Ten way charging unit for QT412 range dual action transmitters ANCILLARY CALLING DEVICES, PRINTERS AND PAGING EQUIPMENT NC805C/6 1.8m (6ft) tail call lead NC805C/14 4.2m (14ft) tail call lead NC805D m (4-12ft) tail call lead QT600P Quantec printer kit incl. printer, lead & wall socket QT600S Quantec printer/paging wall socket DP874QA 400m Transmitter for alpha pagers, lead & wall socket DP876D Display pager aerial, extends transmitting range to 1500m DP876B Mounting bracket for DP876D DP876F 15 metre low loss cable for DP876D DP877QA 32 character alphanumeric display pager, group A QUANTEC ADDRESSABLE CALL SYSTEM QUANTEC DUAL ACTION TRANSMITTERS Addressable Call System 53

5 2 WIRE DISABLED PERSONS TOILET ALARM DISABLED PERSON TOILET ALARMS VPA-200P Standard Disabled Toilet Kit VPA-220P Premier Disabled Toilet Kit VPA-BB1 Back Up Battery Unit VPA-CB Push Button Call Point VPA-ODI Overdoor Twin LED & Sounder VPA-PC Pullcord VPA-RP Remote Reset Point 54