Engine Assembly Hardware Manual

Transcription

1

2 IMPORTANT The purpose of this manual is to provide the location and torque values of the various fasteners within the engine. This is not, and should not be used as, an engine assembly manual or an engine overhaul manual. Engine Components International (ECi ) recommends the use of Lycoming Direct Drive Overhaul Manual (SSP-1776) and applicable service literature for complete assembly information. * * * In order to accommodate all engines series with the proper hardware quantities, the ECi TITAN EXP Engine Hardware Kit (AE116-1) may contain an excess of parts for particular engine models. * * * All parts listed in this manual may be substituted in each ECi Hardware Kit with an FAA approved OEM or other PMA equivalent part number. Please see for PMA Supplements. Hardware Manual Legend Symbol Description Dash Used in engine installation (not part of hardware kits) Check mark Included in Engine Hardware Kit, AE116-1 Diamond Included in Fuel Injection System (FIS) Hardware Kit, AE110 Circled Arrow Included in Cold Induction System (CIS) Hardware Kit, AE109 Revision Table Revision Level Date Page Change / Description 0 02/28/08 n/a 1 03/10/08 Page 18, Fuel Throttle Body & Carburetor 2 05/09/08 Page 13, Magnetos 3 10/02/08 Pages 2, 3, 6, 7, 9, 10, 14, 15, 16, 17, 19, /18/08 Page 3, 16, 17, /15/09 Title page Important message 6 08/13/10 Page 3, 4, 14, 15, 16, /25/11 Cover, Title page Trademarks ECi, EXP, KitEngine, Nickel+Carbide and TITAN are trademarks or registered trademarks of ECi. All other company, product or service names referenced in this document are used for identification purposes only and may be trademarks of their respective owners. Contact Engine Components International 9503 Middlex San Antonio, TX Toll-free Tel Fax Web sales-service@eci.aero 2010 ECi. All rights reserved. M300 Revision 7 (05/25/2011)

3 Inspect the package to determine if there are any damaged or missing items. If you notice a problem, immediately contact your parts supplier or ECi Customer Service department at 800-ECi-2FLY ( ), or sales-service@eci.aero. Table of Contents Assembly Page Crankshaft & Connecting Rod... 2 Crankcase... 3 Idler Shaft... 4 Cylinder and Related Parts... 5 Oil Pump... 6 Fuel Pump Drive... 7 Accessory Case... 8 Fuel Injection Pump (AN Style)... 9 Fuel Pump (AC Style) Prop Governor Adapter & Cover Vacuum Pump Adapter & Cover Magnetos Oil Filter Adapter Prop Governor Line & Starter Oil Sump Cold Induction System Fuel Throttle Body & Carburetor Fuel Injector Lines Hardware Kit Parts Lists Index... 21

4 Crankshaft & Connecting Rod 1 AEL Bolt, Connecting Rod (360, 540) See AEL12186 AEL Bolt, Connecting Rod (340) See AEL12186 AEL Bolt, Connecting Rod (235, 320) See AEL AEL Nut, Connecting Rod 480 in.-lbs. 3 AEL Lockplate, Crankshaft Gear N/A 4 AELSTD Bolt, Crankshaft Gear 204 in.-lbs.* * Install bolt per SB475 (latest revision) & AD C. Parts listed above are shown are for illustrative purposes only; they are not included in the TITAN EXP Engine Hardware Kit (P/N: AE116-1). M300 Revision 7 (05/25/2011) Page 2

5 Crankcase 1 AE Bolt, Hex, 3/8-24 UNF-3 x 3-37/64 N/A 2 AE Washer, Plain, 3/8 ID N/A * 3 AE Washer, Internal Star, 3/8 ID N/A 4 AE Nut, Hex, 3/8-24 UNF 300 in. lbs. 5 AE Bolt, Hex, 1/4-20 UNC x 1-1/8 Long 96 in.-lbs. 6 AE Washer, Plain, 1/4 ID N/A 7 AE Washer, Internal Star, 1/4 ID N/A 8 AE Nut, Hex, 1/4-20 UNC 96 in.-lbs. 9 AE Bolt, Hex, 1/4-20 UNC-3 x 1-1/2 Long 96 in.-lbs. 10 AE Bolt, Hex,1/4-20 UNC x 1-3/4 Long 96 in.-lbs. 11 SL-STD Nut, Hex, High Castle, 3/8-24 UNF 300 in. lbs.; secure with lockwire * 12 AE8001D Bolt, Hex, 1/4-20 UNC x 1-1/2 Drilled End in.-lbs. 13 AE Nut, Hex, Castle, 1/4-20 UNC in.-lbs. ; secure with lockwire 14 AEL Thrubolt, 1/2-20 x Long N/A 15 AELSTD O-Ring, Thrubolt N/A 16 AEL O-Ring, Thrubolt N/A 17 AEL O-Ring, Thrubolt N/A * Correct alignment of the nut castellations and stud safety wire hole at the proper torque may require up to three washers (max). Washer, Flat,.390 ID.625 OD x.032 Thick (P/N: AE L)is available. M300 Revision 7 (05/25/2011) Page 3

6 Idler Shaft 1 AE * 1 Nut, Hex, Castle, 5/16-18 UNC 150 in.-lbs.; secure with lockwire 2 AE8001A Bolt, Hex, 5/16-18 UNC x 7/8 Drilled Head in.-lbs.; secure with lockwire * See Lycoming Service Instruction 1310A or latest revision. M300 Revision 7 (05/25/2011) Page 4

7 Cylinder and Related Parts 1 AEL383-B 16 Nut, Hex, 3/ in.-lbs. 2 AELSTD Nut, Hex, 1/ in.-lbs. 3 AEL Spacer, 33/64 ID x 7/8 OD x 3/8 Thick N/A 4a AE Screw, Phillips head, 1/4-20, Stainless 50 in.-lbs.* 4b AE Washer, Plain, 1/4 ID, Stainless N/A 4c AE Washer, External Star, 1/4 ID, Stainless N/A 5 AEL Seal, Pushrod Shroud N/A 6 AEL O-Ring, Pushrod Shroud N/A 7 AEL Spring, Pushrod Shroud N/A 8 AEL Lockplate, Pushrod Shroud N/A 9 AE Nut, Hex, 1/4-20 UNC 96 in.-lbs. * Silicone rocker cover gaskets have specific procedures and torque values. See ECi SB 03-3 for details. M300 Revision 7 (05/25/2011) Page 5

8 Oil Pump 1 AE Washer, Plain, 5/16 ID N/A 2 SL-STD Nut, Hex, High Castle, 5/16-18 UNC 204 in.-lbs.; secure with lockwire M300 Revision 7 (05/25/2011) Page 6

9 Fuel Pump Drive Bolt, Hex, 1/4-20UNC x 5/8, Drilled 1 AE8001H in.-lbs.; secure with lockwire Head * (See illustration) This offset shaft is to be installed with short side towards the fuel pump. Included in the TITAN EXP Fuel Injection System Hardware Kit, (P/N: AE110). All other parts shown are for illustrative purposes only. M300 Revision 7 (05/25/2011) Page 7

10 Accessory Case 1 AE Bolt, Hex, 1/4-20 UNC x 15/16 Long 96 in.-lbs. 2 AE Washer, Internal Star, 1/4 ID N/A 3 AE Washer, Plain, 1/4 ID N/A 4 AE Bolt, Hex, 1/4-20 x 1-1/4 Long 96 in.-lbs. 5 AE Bolt, Hex, 1/4-20 UNC-3 x 1-1/2 Long 96 in.-lbs. M300 Revision 7 (05/25/2011) Page 8

11 Fuel Injection Pump (AN Style) 1 AE Nut, Hex, 5/16-18 UNC in.-lbs. 2 AE Washer, Internal Star, 5/16 ID N/A 3 AELSTD213 1 Seal, Fuel Pump Drive Shaft N/A 4 AE Washer, Plain, 5/16 ID N/A Included in the TITAN EXP Fuel Injection System Hardware Kit, (P/N: AE110). All other parts shown are for illustrative purposes only. M300 Revision 7 (05/25/2011) Page 9

12 Fuel Pump (AC Style) 1 AE Washer, Internal Star, 3/8 ID N/A 2 AE Bolt, Hex, 3/8-16 UNC-3 x 3/4 Long in.-lbs. 3 AE Washer, Plain, 3/8 ID N/A 4 NAS1352-6H20P 2 Bolt, Int. Wrench, 3/8-16 UNC x 1-1/ in. lbs.; secure with lockwire M300 Revision 7 (05/25/2011) Page 10

13 Prop Governor Adapter & Cover 1 AE Nut, Hex, 5/16-18 UNC 204 in.-lbs. 2 AE Washer, Internal Star, 5/16 ID N/A 3 AE Washer, Plain, 5/16 ID N/A 4 MS Retaining Ring, Internal, 13/16 ID x 27/64 Thick N/A 5 AEL Washer, Accessory Gear N/A 6 AE8001H Bolt, Hex, 5/16-18 UNC x 1 7/32 Drilled Head 204 in.-lbs.; secure with lockwire M300 Revision 7 (05/25/2011) Page 11

14 Vacuum Pump Adapter & Cover 1 AE Washer, Accessory Gear N/A 2 AE Washer, Plain, 1/4 ID N/A 3 AE Washer, Internal Star, 1/4 ID N/A 4 AE Nut, Hex, 1/4-20 UNC 96 in.-lbs. 5 AELSTD208 1 Seal, Vacuum Pump Drive Shaft N/A M300 Revision 7 (05/25/2011) Page 12

15 Magnetos 1 AE Pin, Cotter, 3/32 Dia. x 3/4 Long N/A 2 AE Nut, Hex, 5/16-18 UNC 204 in.-lbs. 3 AE Washer, Internal Star, 5/16 ID N/A 4 AEL Clamp, Magneto N/A M300 Revision 7 (05/25/2011) Page 13

16 Oil Filter Adapter 1 AEL Adapter, Breather N/A 2 AEL Plug, Oil Cooler Bypass N/A 3 AELSTD294 1 Gasket, Annular, 7/8 OD x 5/8 ID x 3/32 Thick N/A 4 AE Washer, Internal Star, 1/4 ID N/A 5 AE Washer, Plain, 1/4 ID N/A 6 AE Bolt, Hex, 1/4-20 UNC x 1.00 Long 96 in.-lbs. 7 AEL Gasket, Temperature Control Valve N/A M300 Revision 7 (05/25/2011) Page 14

17 Prop Governor Line & Starter 1 MS Elbow, 90º, 1/4-NPT x 3/8 Flared Tube 130 in.-lbs. 2 AE Bolt, Hex, 5/16-18 UNC-3 x 15/16 Long 204 in.-lbs. 3 AE Washer, Internal Star, 5/16 ID N/A 4 AE Washer, Plain, 5/16 ID N/A 5 AE Clamp, Cushion, 3/8 ID for 1/4 Dia. Screw N/A 6 AEL Elbow, Prop Governor Line Connection 110 in.-lbs. 7 AELSTD Hose, Prop Governor Line Support N/A 8 AEL Clip, Prop Governor Line Support N/A 9 AE Nut, Hex, 5/16-18 UNC 204 in.-lbs. 10 AE Bolt, Hex, 5/16-18 UNC-3 x 1-5/32 Long 204 in.-lbs. M300 Revision 7 (05/25/2011) Page 15

18 Oil Sump 1 AE Bolt, Hex, 1/4-20 UNC x 15/16 Long 96 in.-lbs. 2 AE Bolt, Hex, 1/4-20 UNC x 1-1/8 Long 96 in.-lbs. 3 AE Washer, Plain, 1/4 ID N/A 4 AE Washer, Internal Star, 1/4 ID * N/A 5 AE Nut, Hex, 1/4-20 UNC * 96 in.-lbs. 6 MS Screw, Drive, #4 x 3/16 Long N/A 7 AELSTD551 3 Plug, Square Head, 1/2 NPT Flush with casting 8 AEL Screen, Oil Filter N/A 9 AELSTD111 1 Gasket, Annular, 1-14 OD x 1 ID x 3/32 Thick N/A 10 AEL Plug, Oil Screen 135 after full contact Included in the TITAN EXP Cold Induction System Hardware Kit, (P/N: AE109). M300 Revision 7 (05/25/2011) Page 16

19 Cold Induction System 1 AE Bolt, Hex, 1/4-20 x 1-1/4 Long 96 in.-lbs. 2 AE Washer, Plain, 1/4 ID N/A 3 AE Washer, Internal Star, 1/4 ID N/A 4 AE Spacer, Phenolic, Plenum,.063 Thickness N/A 5 AE Washer, Plain, 5/16 ID N/A 6 AE8001H Bolt, 5/16-18UNC x 1 Long, Drilled Head 204 in.-lbs., Lockwire to casting 7 AE Valve Assy, Drain 40 in.-lbs. 8 AEL Clamp, Hose N/A Included in the TITAN EXP Cold Induction System Hardware Kit, (P/N: AE109). All other parts shown are for illustrative purposes only. M300 Revision 7 (05/25/2011) Page 17

20 Fuel Throttle Body & Carburetor 1 AE Nut, Hex, Lock, 5/16-18 UNC 204 in.-lbs. 2 AE Washer, Plain, 5/16 ID N/A 3 AE Washer, Belleville, Safety Serrated N/A 4 AE Bolt, Int. Wrenching, UNC 5/16-18x1.00 Long in.-lbs. 5 AE Washer, Internal Star, 5/16 ID N/A Included in the TITAN EXP Fuel Injection System Hardware Kit, (P/N: AE110). M300 Revision 7 (05/25/2011) Page 18

21 Fuel Injector Lines 1 AE Washer, Internal Star, 1/4 ID N/A 2 AE Bolt, Hex, 1/4-20 x 1/2 Long in.-lbs in. lbs. Safety 3 AE8007H Screw, Fill, Slot, #10-24UNC x 1/2, Drill Hd wire screws together 4 AE Clamp, Cushion, 1/8 ID for #10 Dia. Screw N/A 5 AE Clamp, Cushion, 3/4 ID for #10 Dia. Screw N/A 6 AE Screw, Fillister, Slotted, #10-32UNF x 5/8 49 in.-lbs. 7 AE L 14 Washer, Flat, #10,.032 Thick N/A 8 AE Nut, Hex, Nylon Lock, #10-32UNC 49 in.-lbs. 9 AE Bracket, Support Clamp N/A Included in the TITAN EXP Fuel Injection System Hardware Kit, (P/N: AE110). M300 Revision 7 (05/25/2011) Page 19

22 Hardware Kit Parts Lists Inspect the package to determine if there are any damaged or missing items. If you notice a problem, immediately contact your parts supplier or ECi Customer Service department at 800-ECi-2FLY ( ), or sales-service@eci.aero. TITAN EXP Cold Induction System Hardware Kit P/N: AE109 Part No. Description Qty PMA Supp. AE Valve Assy, Drain 1 EXP AE Spacer, Phenolic, Plenum,.063 Thickness 4 EXP AE Washer, Plain, 1/4 ID AE Washer, Plain, 5/16 ID 4 59 AE Washer, Internal Star, 1/4 ID AE Bolt, Hex, 1/4-20 UNC x 15/16 Long AE Bolt, Hex, 1/4-20 UNC x 1-1/8 Long 2 59 AE Bolt, Hex, 1/4-20 x 1-1/4 Long 8 59 AE8001H Bolt, 5/16-18UNC x 1 Long, Drilled Head 4 EXP AE Nut, Hex, 1/4-20 UNC AEL Clamp, Hose 8 39 TITAN EXP Fuel Injection System Hardware Kit P/N: AE110 Part No. Description Qty PMA Supp. AE Washer, Belleville, Safety Serrated 4 EXP AE Bolt, Int. Wrenching, UNC 5/16-18x1.00 Long 4 EXP AE Clamp, Cushion, 1/8 ID for #10 Dia. Screw 6 47 AE Clamp, Cushion, 3/4 ID for #10 Dia. Screw 5 47 AE L Washer, Flat, #10,.032 Thick 14 EXP AE Washer, Plain, 5/16 ID 8 59 AE Washer, Internal Star, 1/4 ID 1 59 AE Washer, Internal Star, 5/16 ID 4 59 AE73136 Bracket, Support Clamp 2 EXP AE Bolt, Hex, 1/4-20 x 1/2 Long 1 59 AE8001H Bolt, Hex, 1/4-20UNC x 5/8, Drilled Head 2 EXP AE Screw, Fillister, Slotted, #10-32UNF x 5/ AE8007H Screw, Fill, Slot, #10-24UNC x 1/2, Drill Hd 2 59 TITAN EXP Engine Hardware Kit P/N: AE116-1 Part No. Description Qty PMA Supp. AE Pin, Cotter, 3/32 Dia. x 3/4 Long 2 EXP AE Clamp, Cushion, 3/8 ID for 1/4 Dia. Screw 1 47 AE Washer, Plain, 1/4 ID AE Washer, Plain, 5/16 ID AE Washer, Plain, 3/8 ID 6 59 AE Washer, Internal Star, 1/4 ID AE Washer, Internal Star, 5/16 ID AE Washer, Internal Star, 3/8 ID 4 59 AE Bolt, Hex, 3/8-24 UNF-3 x 3-37/ AE Bolt, Hex, 1/4-20 UNC x 15/16 Long AE Bolt, Hex, 1/4-20 UNC x 1.00 Long 4 59 AE Bolt, Hex, 1/4-20 UNC-3 x 1-1/8 Long 3 59 AE Bolt, Hex, 1/4-20 x 1-1/4 Long 9 59 AE Bolt, Hex, 1/4-20 UNC-3 x 1-1/2 Long AE Bolt, Hex, 1/4-20 UNC x 1-3/4 Long 1 59 AE Bolt, Hex, 5/16-18 UNC-3 x 15/16 Long 1 59 AE Bolt, Hex, 5/16-18 UNC-3 x 1-5/32 Long 1 59 AE Bolt, Hex, 3/8-16 UNC-3 x 3/4 Long 2 59 AE8001A Bolt, Hex, 5/16-18 UNC x 7/8 Drilled Head 3 59 AE8001D Bolt, Hex, 1/4-20 UNC x 1-1/2 Drilled End 3 59 AE8001H Bolt, Hex, 5/16-18 UNC x 1 7/32 Drilled Head 4 59 AE Nut, Hex, 3/8-24 UNF 2 59 AE Nut, Hex, 1/4-20 UNC AE Nut, Hex, 5/16-18 UNC AE Nut, Hex, Castle, 1/4-20 UNC 3 59 AE Nut, Hex, Castle, 5/16-18 UNC 1 59 AE Nut, Hex, Lock, 5/16-18 UNC 4 59 MS Screw, Drive, #4 x 3/16 Long 4 SP NAS1352-6H20P Bolt, Int. Wrench, 3/8-16 UNC x 1-1/4 2 SP SL-STD-1420 Nut, Hex, High Castle, 5/16-18 UNC 3 OE SL-STD-872 Nut, Hex, High Castle, 3/8-24 UNF 1 OE AE Nut, Hex, 5/16-18 UNC 4 59 AE Nut, Hex, Nylon Lock, #10-32UNC 7 EXP EXP ECi Xperimental Products not PMA Certified OE See OEM or manufacturer s PMA Supplement for details SP Standard Part in accordance with FAR Part 21 ECi. All rights reserved. M300 Revision 7 (05/25/2011) Page 20

23 Index AE Valve Assy, Drain... 17, 20 AE Pin, Cotter, 3/32 Dia. x 3/4 Long... 13, 20 AE Washer, Belleville, Safety Serrated AE Bolt, Int. Wrenching, UNC 5/16-18x1.00 Long... 18, 20 AE109 TITAN EXP Cold Induction System Hardware Kit... 2, 16, 17, 20 AE110 TITAN EXP Fuel Injection System Hardware Kit... 2, 7, 9, 18, 19, 20 AE116-1 TITAN EXP Engine Hardware Kit. 2, 3, 4, 5, 6, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 AE Clamp, Cushion, 1/8 ID for #10 Dia. Screw 19, 20 AE Clamp, Cushion, 3/4 ID for #10 Dia. Screw 19, 20 AE Clamp, Cushion, 3/8 ID for 1/4 Dia. Screw. 15, 20 AE Spacer, Phenolic, Plenum,.063 Thickness 17, 20 AE35355 Screw, Phillips head, 1/4-20, Stainless... 5 AE35356 Washer, Plain, 1/4 ID, Stainless... 5 AE35357 Washer, External Star, 1/4 ID, Stainless... 5 AE L Washer, Flat, #10,.032 Thick... 19, 20 AE Washer, Plain, 1/4 ID... 3, 8, 12, 14, 16, 17, 20 AE Washer, Plain, 5/16 ID. 6, 9, 11, 15, 17, 18, 20 AE Washer, Plain, 3/8 ID... 3, 10, 20 AE L Washer, Flat,.390 ID.625 OD x.032 Thick.. 3 AE Washer, Internal Star, 1/4 ID.. 3, 8, 12, 14, 16, 17, 19, 20 AE Washer, Internal Star, 5/16 ID... 9, 11, 13, 15, 18, 20 AE Washer, Internal Star, 3/8 ID... 3, 10, 20 AE71596 Washer, Accessory Gear AE73136 Bracket, Support Clamp... 19, 20 AE Bolt, Hex, 3/8-24 UNF-3 x 3-37/ , 20 AE Bolt, Hex, 1/4-20 x 1/2 Long... 19, 20 AE Bolt, Hex, 1/4-20 UNC x 15/16 Long. 8, 16, 20 AE Bolt, Hex, 1/4-20 UNC x 1.00 Long... 14, 20 AE Bolt, Hex, 1/4-20 UNC x 1-1/8 Long.. 3, 16, 20 AE Bolt, Hex, 1/4-20 x 1-1/4 Long... 8, 17, 20 AE Bolt, Hex, 1/4-20 UNC-3 x 1-1/2 Long. 3, 8, 20 AE Bolt, Hex, 1/4-20 UNC x 1-3/4 Long... 3, 20 AE Bolt, Hex, 5/16-18 UNC-3 x 15/16 Long 15, 20 AE Bolt, Hex, 5/16-18 UNC-3 x 1-5/32 Long... 15, 20 AE Bolt, Hex, 3/8-16 UNC-3 x 3/4 Long... 10, 20 AE8001A Bolt, Hex, 5/16-18 UNC x 7/8 Drilled Head... 4, 20 AE8001D Bolt, Hex, 1/4-20 UNC x 1-1/2 Drilled End... 3, 20 AE8001H Bolt, Hex, 1/4-20UNC x 5/8, Drilled Head 7, 20 AE8001H Bolt, 5/16-18UNC x 1 Long, Drilled... 17, 20 AE8001H Bolt, Hex, 5/16-18 UNC x 1 7/32 Drilled Head... 11, 20 AE Screw, Fillister, Slotted, #10-32UNF x 5/8.. 19, 20 AE8007H Screw, Fill, Slot, #10-24UNC x 1/2, Drill Hd 19 AE Nut, Hex, 3/8-24 UNF... 3, 20 AE Nut, Hex, 1/4-20 UNC... 3, 5, 12, 16, 20 AE Nut, Hex, 5/16-18 UNC... 9, 11, 13, 15, 20 AE Nut, Hex, Castle, 1/4-20 UNC... 3, 20 AE Nut, Hex, Castle, 5/16-18 UNC... 4, 20 AE Nut, Hex, Lock, 5/16-18 UNC... 18, 20 AE Nut, Hex, Nylon Lock, #10-32UNC... 19, 20 AEL12186 Nut, Connecting Rod... 2 AEL12272 Lockplate, Pushrod Shroud... 5 AEL12545 Plug, Oil Screen AEL14995 Spring, Pushrod Shroud... 5 AEL Clamp, Hose... 17, 20 AEL18639 Lockplate, Crankshaft Gear... 2 AEL18661 Seal, Pushrod Shroud... 5 AEL21195 Clamp, Magneto AEL383-B Nut, Hex, 3/ AEL62417 Plug, Oil Cooler Bypass AEL70310 O-Ring, Pushrod Shroud... 5 AEL70484 Screen, Oil Filter AEL71140 Adapter, Breather AEL71596 Washer, Accessory Gear AEL72075 O-Ring, Thrubolt... 3 AEL72091 O-Ring, Thrubolt... 3 AEL74070 Elbow, Prop Governor Line Connection AEL74669 Bolt, Connecting Rod (340)... 2 AEL74887 Spacer, 33/64 ID x 7/8 OD x 3/8 Thick... 5 AEL75061 Bolt, Connecting Rod (360, 540)... 2 AEL75165 Clip, Prop Governor Line Support AEL76220 Thrubolt, 1/2-20 x Long... 3 AEL76510 Gasket, Temperature Control Valve AEL78027 Bolt, Connecting Rod (235, 320)... 2 AELSTD111 Gasket, Annular, 1-14 OD x 1 ID x 3/32 Thick AELSTD1930 Hose, Prop Governor Line Support AELSTD2013 O-Ring, Thrubolt... 3 AELSTD208 Seal, Vacuum Pump Drive Shaft AELSTD2090 Nut, Hex, 1/ AELSTD213 Seal, Fuel Pump Drive Shaft... 9 AELSTD2213 Bolt, Crankshaft Gear... 2 AELSTD294 Gasket, Annular, 7/8 OD x 5/8 ID x 3/32 Thick AELSTD551 Plug, Square Head, 1/2 NPT MS Retaining Ring, Internal, 13/16 ID x 27/64 Thick MS Elbow, 90º, 1/4-NPT x 3/8 Flared Tube MS Screw, Drive, #4 x 3/16 Long... 16, 20 NAS1352-6H20P Bolt, Int. Wrench, 3/8-16 UNC x 1-1/ , 20 SL-STD-1420 Nut, Hex, High Castle, 5/16-18 UNC... 6, 20 SL-STD-872 Nut, Hex, High Castle, 3/8-24 UNF... 3, 20 ECi. All rights reserved. M300 Revision 7 (05/25/2011) Page 21