1-Way Bracket Assemblies
|
|
- Lisa Shelton
- 8 years ago
- Views:
Transcription
1 -Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of signals to any size of mast arm or pole. This complete adjustability is not possible with other types of rigid mountings. ASTRO-BRAC ASSY, Stellar Series: -Way Band Mount... AS-0 -Way Cable Mount... AS-0 -Way Tenon Mount... AB-0 ASTRO-BRAC CLAMP KIT: Band Mount, Stellar Series... AS-00 Cable Mount, Stellar Series... AS-00 Tenon Mount... AB-0 ARM KIT, ½" CTC... AB-000 GUSSETED TUBE, w/ Vinyl Insert, ½" Alum TOE... AB-00. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. See pages T- thru T- for clamp kit pole diameter options.. Please specify options when ordering. SIGNAL SECTION:,,,, or BAND LENGTH: ", ", ", ", or " SIGNAL SECTION:,,,, or CABLE LENGTH: ", ", or " SIGNAL SECTION:,,,, or 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com 0//0 Page T-
2 Horizontal Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac easily adapts to mount signals horizontally from a mast arm or span wire. When adjustments for skewed angles are necessary, the Articulating Astro-Brac is a must. SIGNAL SECTION:,, or BAND LENGTH: ", ", ", ", or " CGB: 0."-0." wire size 0."-0." wize HORIZONTAL MAST ARM ASSY, Stellar Series: -Way Band Mount... AS-0 -Way Cable Mount... AS-0 ASTRO-BRAC CLAMP KIT, Stellar Series: Band Mount... AS-00 Cable Mount... AS-00 TUBE, Aluminum, ½" x Length... SE-0 ARM KIT, ½" CTC, Tapped for /" CGB... AB-00 CGB, 0."-0." Wire Size.... SE-0 CGB, 0."-0." Wire Size.... SE-00. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. See pages T- thru T- for clamp kit pole diameter options.. Please specify options when ordering. CGB Option SIGNAL SECTION:,, or CABLE LENGTH: ", ", or " CGB: 0."-0." WIRE SIZE 0."-0." WIRE SIZE 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com Page T- 0//0
3 Pedestrian Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. These brackets allow the rigid, completely adjustable, mounting of the Pedestrian Signal. ICC PEDESTRIAN HEAD ASSY, Stellar Series: -Way Band Mount... AS-0 -Way Band Mount... AS-0 -Way Cable Mount... AS-0 -Way Cable Mount... AS-0 ASTRO-BRAC CLAMP KIT, Stellar Series: Band Mount... AS-00 Cable Mount... AS-00 GUSSETED TUBE, w/ Vinyl Insert, ½" Alum TOE... AB-00 UPPER ARM: -Way, " CTC... AB-0 -Way... AB-0 LOWER ARM: -Way " CTC... AB-0 -Way... AB-0 COVER," CTC, ABS Plastic...AB-0-M COVER SET, -Way Lower Arm, ABS Plastic...AB-0-M HARDWARE KIT, -Way Arm... AB-00 SPACER KIT, ICC Ped Head... AB-0 ITEM - BAND LENGTH: ", ", ", ", or ". All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. See pages T- thru T- for clamp kit pole diameter options.. Please specify options when ordering. ITEM - CABLE LENGTH: ", ", or " 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com 0//0 Page T-
4 Articulated Serrated Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Articulated Serrated series of Astro-Brac can handle even the toughest signal alignment problems. The internal wiring capability and axes of adjustments make this system visibly the most universal. SIGNAL SECTION:,,,, or BAND LENGTH: ", ", ", ", or " SIGNAL SECTION:,,,, or CABLE LENGTH: ", ", or " ARTICULATED SERRATED ASSY: -Way Band Mount... AB-0 -Way Cable Mount... AB-0 -Way Tenon Mount, -/" to ½" O.D.... AB-0 -Way Tenon Mount, -/" O.D.... AB-0 -Section Cluster Cable Mount... AB-0 ARTICULATED SERRATED CLAMP KIT: Band Mount, Internal Wiring Capability... AB-0 Cable Mount, Internal Wiring Capability... AB-0 Tenon Mount, -/" to ½" O.D. Pole... AB-00 Tenon Mount, -/" O.D. Tenon... AB-0 ARM KIT: -Way, ½" CTC... AB-000 -Section Cluster... AB-00 GUSSETED TUBE, ½" Alum TOE w/ Vinyl Insert... AB-00. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. See pages T- thru T- for clamp kit pole diameter options.. Please specify options when ordering. ITEM - SIGNAL SECTION:,,,, or CABLE LENGTH: ", ", or " 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com //0 Page T-
5 Terminal Compartment Assemblies Tube Length " " " ITEM - SIGNAL SECTION:,, or BAND LENGTH: ", ", ", ", or " IN-LINE OPS ASSY.'S Signal Section The Astro-Brac in its various configurations is a truly universal system for mounting signals. When Astro-Brac is required to have a terminal compartment take your pick of in-line or integral clamp kit terminal compartments without sacrificing adjustability. TERMINAL COMPARTMENT ASSY.: -Way In-Line, Stellar Series, Band Mount... AS-0 -Way Mark I, Band Mount... AB-0 -Way Mark I, Cable Mount... AB-0 -Sec Cluster, Cable Mount... AB-0 ASTRO-BRAC CLAMP KIT: Band Mount, Stellar Series... AS-00 Mark I Terminal Compartment, Band Mount... AB-0 Mark I Terminal Compartment, Cable Mount... AB-0 ARM KIT: ½" CTC... AB-000 -Section Cluster... AB-00 TERMINAL COMPARTMENT, In-Line Flat Back... SE- GUSSETED TUBE, ½" Alum TOE w/ Vinyl Insert... AB-00. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. See pages T- thru T- for clamp kit pole diameter options.. Please specify options when ordering. SIGNAL SECTION:,, or CABLE LENGTH: ", ", or " CABLE LENGTH: ", ", OR " 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com 0//0 Page T-
6 OPS Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. When mounting programmable signals set your sights on the most versatile mounting system. You will clearly see why the adjustability of the Astro- Brac fills the bill. M Parts M Parts -WAY OPTICALLY PROGRAMMED ASSY: OPS Band Mount, Stellar Series... AS-0 M Band Mount, Stellar Series... AS-0 OPS Cable Mount, Stellar Series... AS-0 M Tenon... AB-0 -SEC CLUSTER, M Band Mount... AB-0 ASTRO-BRAC CLAMP KIT: Band Mount, Stellar Series... AS-00 Cable Mount, Stellar Series... AS-00 Tenon Mount... AB-0 ARM KIT: ", McCain & M Optically Programmed Signals... AB-00 ", M Optically Programmed Signals... AB-000 -Section Cluster OPS... AB-00 GUSSETED TUBE, ½" Alum TOE w/ Vinyl Insert... AB-00 ITEMS - SIGNAL SECTION:,,,, or BAND LENGTH: ", ", ", ", or ". All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. See pages T- thru T- for clamp kit pole diameter options.. Please specify options when ordering. ½" OPS ASSY'S Tube Length 0" " " Signal Section TRI-BOLT OPS ASSY'S Tube Length " " " Signal Section M Parts M Parts M Parts M Parts SIGNAL SECTION:,,,, or CABLE LENGTH: ", ", or " SIGNAL SECTION:,,,, or BAND LENGTH: ", ", ", ", or " 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com Page T- 0//0
7 Cable Mount Clamp Kits These high tensile aluminum alloy clamp kits provide strength with maximum adjustability and complete clamping versatility. They feature high strength galvanized aircraft cable and stainless steel swaged fittings. Supplied complete with all necessary attaching hardware. ASTRO-BRAC CLAMP KIT: Stellar Series Cable Mount... AS-00 Cable Mount... AB-00 Free-Swinging Cable Mount, /" Clevis... AB-0 ½" Threaded Cable Mount... AB-0 " Threaded Cable Mount... AB-0 CABLE ASSEMBLY, Galv. Screw & Stainless Hdwr.... AB-00 U-BOLT KIT, /"-, Stainless... AB-0. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating.. Please specify options when ordering. CABLE LENGTH: " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com Page T- 0//0
8 Band Mount Clamp Kits These high tensile aluminum alloy clamp kits provide strength with maximum adjustability and complete clamping versatility. They feature forged galvanized clamp screws which allow easy signal mounting on any size signal pole. Supplied complete with all necessary attaching hardware. ASTRO-BRAC CLAMP KIT: Stellar Series Band Mount... AS-00 Band Mount... AB-00 Free-Swinging Band Mount, /" Clevis... AB-0 Free-Swinging Band Mount, /" Clevis... AB-0 ½" Threaded Band Mount... AB-00 " Threaded Band Mount... AB-00 Plumbizer Band Mount... AB-00 Band Mount, For Large Dia. Poles... AB-0 CLAMP SCREW KIT, Galv. Screw & Stainless Hdwr.... AB-00 BAND, /", Stainless... AB-0 U-BOLT KIT, /"-, Stainless... AB-0 SUPPORT TUBE, " x ", Alum.... SE-0. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. Please specify options when ordering. ITEM - BAND LENGTH: " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole BAND LENGTH: " fits."-" dia. pole " max. fits."-" dia. pole 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com //0 Page T-
9 Articulated Clamp Kits The aluminum articulated clamp kits provide strength with axis of adjustability and complete clamping versatility. They feature forged galvanized clamp screws with stainless steel bands or high strength galvanized aircraft cable. Supplied complete with all necessary attaching hardware. BAND LENGTH: " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole ASTRO-BRAC CLAMP KIT: Horizontal Articulated Band Mount... AB-0 Horizontal Articulated Cable Mount... AB-0 Horizontal Articulated Cable Mount w/ Tube Saddle... AB-0 CLAMP SCREW KIT, Galv. Screw & Stainless Hdwr.... AB-00 BAND, /", Stainless... AB-0 CABLE ASSEMBLY, Galv. Cable & Stainless Hdwr.... AB-00 U-BOLT KIT, /"-, Stainless... AB-0 TUBE SADDLE, Alum.... AB-00. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. Please specify options when ordering. ITEM - CABLE LENGTH: " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com //0 Page T-
10 Tenon Mount Clamp Kits These high tensile aluminum alloy clamp kits provide strength with maximum adjustability and complete clamping versatility. They feature stainless steel studs and cast back half clamps for mounting to plumbizer tenon or small diameter structures. Supplied complete with all necessary attaching hardware. ASTRO-BRAC CLAMP KIT: Tenon Mount, Fits." to." Dia. Pole... AB-0 Horizontal Articulated Tenon Mount, Fits." to." Dia. Pole... AB-0 Free-Swinging Tenon Mount, /" Clevis... AB-0 U-BOLT KIT, /"-, Stainless... AB-0. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating.. Please specify options when ordering. 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com //0 Page T-
11 Mini-Brac Clamp Kits This unique mount is a smaller version of the Astro-Brac and gives the same kind of universal application. Ideal for side-of-pole or mast arm mountings. THREADS: ½"-½" NPS ½"-½" NPT BAND LENGTH: " fits "-" dia. pole " fits "-" dia. pole ASTRO MINI-BRAC CLAMP KIT: Band Mount, ½"... AB-0 Band Mount... AB-0 Cable Mount, ½" NPS... AB-0 Cable Mount, /"- NPT... AB-0 BAND, /", Stainless... AB-0 CLAMP SCREW KIT, Galv. Screw & Stainless Hdwr.... AB-00 CABLE ASSEMBLY, Mini-Brac, Galv. Screw & Stainless Hdwr.... AB-0. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. Please specify options when ordering. THREADS: /"- NPT (M Opticom) "- NC BAND LENGTH: " fits "-" dia. pole " fits "-" dia. pole Typical Applications Mast Arm Mounting Emergency Traffic Signal Sensor ITEM - CABLE LENGTH: " fits "-" dia. pole Side-of-Pole Mounting Vehicular or Pedestrian Signals 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com //0 Page T-
12 Articulated Serrated Clamp Kits The aluminum articulated serrated clamp kits provide strength with axis of adjustability and complete clamping versatility. They feature unobstructed center openings for internal wiring capability and come complete with all necessary attaching hardware. BAND LENGTH: " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole ASTRO-BRAC CLAMP KIT: Articulated Serrrated Band Mount... AB-0 Articulated Serrrated Cable Mount... AB-0 Articulated Serrrated Tenon Mount, -/" to ½" O.D. Pole... AB-00 Articulated Serrrated Tenon Mount, -/" O.D. Pole... AB-0 CLAMP SCREW KIT, Galv. Screw & Stainless Hdwr.... AB-00 BAND, /", Stainless... AB-0 CABLE ASSEMBLY, Galv. Cable & Stainless Hdwr.... AB-00 U-BOLT KIT, /"-, Stainless... AB-0. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. Please specify options when ordering. CABLE LENGTH: " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole ITEM - 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com Page T- //0
13 Stellar Series Clamp Kits These tensile aluminum alloy clamp kits provide strength with maximum adjustability and complete clamping versatility. They feature an intergral terminal compartment for easy signal wiring and come complete with all necessary attaching hardware. STELLAR SERIES CLAMP KIT: Band Mount... AS-00 Cable Mount... AS-00 CLAMP SCREW KIT, Galv. Screw & Stainless Hdwr.... AB-00 BAND, /", Stainless... AB-0 CABLE ASSEMBLY, Galv. Cable & Stainless Hdwr.... AB-00 U-BOLT KIT, /"-, Stainless... AB-0. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. Please specify options when ordering. BAND LENGTH: " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole CABLE LENGTH: " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com Page T- //0
14 -Way Arm Kits All Pelco arms kits are durable aluminum alloy castings. Various styles are available to fit any manufacturers signal. They allow positive positioning of the signal head without misalignment. Supplied complete with stainless steel hardware and wire covers. M Parts M Parts ASTRO ARM KIT: -WAY, ½" CTC... AB-000 -WAY, ½" CTC, w/ Stainless Slotted Washer... AB-00 -WAY, ½" CTC, Tapped for /" CGB... AB-00 -WAY, ½" CTC,Tapped for " CGB... AB-00 -WAY, " CTC, For M Optically Programmed Signals... AB-000 -WAY, " CTC, For McCain or M Optically Programmed Signals... AB-00 UPPER ARM: ½" CTC... AB-0 ½" CTC, Tapped for /" CGB... AB-0 ½" CTC, Tapped for " CGB... AB-0 " CTC, M Optically Programmed Signals... AB-0 " CTC, Optically Programmed Signals... AB-0 LOWER ARM: ½" CTC... AB-0 " CTC, M Optically Programmed Signals... AB-0 " CTC, Optically Programmed Signals... AB-00 COVER, LOWER ARM: ½" CTC, ABS Plastic... AB-0-M " CTC, ABS Plastic... AB-0-M " CTC, ABS Plastic... AB-0-M HARDWARE KIT: -Way... AB-00 -Way w/ Stainless Slotted Washer... AB-0 -Way For CGB Arm... AB-0 -Way For M Arm... AB-0 OCTAGONAL CAP, ½" x -/" Alum... SE-0 ALLTHREAD NIPPLE, ½" x -/" Alum... SE All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating.. Please specify options when ordering. 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com Page T- //0
15 -Way & Cluster Arm Kits All Pelco arms kits are durable aluminum alloy castings. Various styles are available to fit any manufacturers signal. They allow positive positioning of the signal head without misalignment. Supplied complete with stainless steel hardware and wire covers. ASTRO ARM KIT: -Way... AB-00 -Way, w/ Stainless Slotted Washer... AB-00 -Way Variable... AB-00 -Sec Cluster... AB-00 -Sec Cluster, w/ Stainless Slotted Washer... AB-00 -Sec Cluster, M Optically Programmed Signals...AB-00 UPPER ARM: -Way... AB-0 " CTC, M Optically Programmed Signals... AB-0 -Sec. Cluster... AB-0 LOWER ARM, -Way... AB-0 COVER SET, -Way Lower Arm, ABS Plastic... AB-0-M COVER, Upper Cluster Arm, ABS Plastic... AB-0-M HARDWARE KIT: -Way... AB-00 -Way w/ Stainless Slotted Washer... AB-0 -Sec. Cluster... AB-00 -Sec. Cluster w/ Stainless Slotted Washer... AB-0 -Sec. Cluster For M Signals... AB-0. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating.. Please specify options when ordering. M Parts 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com //0 Page T-
16 Aluminum Tubes Supplied in lengths shown below, Pelco's vertical support tubing is made from high strength aluminum alloy. A unique shape and vinyl insert insures a complete weather proof wiring installation anywhere along the entire length of the tube. The standard " tube will accommodate all signal combinations up to - Section ". Tubes are also available in " and " lengths for and - Section combinations. GUSSETED TUBE w/ VINYL INSERT: ½" x Length, Threaded One End...AB-00 ½" x Length, Threaded Both Ends...AB-00 GUSSETED TUBE ONLY: ½" x Length, No Threads...AB-000 ½" x Length, Threaded One End...AB-00 ½" x Length, Threaded Both Ends...AB-00 ALUMINUM TUBE ½" x Length, No Threads...SE-0. Lengths up to 0" maximum are available upon request.. Please specify options when ordering. TUBE LENGTH: " for up to -sec " " for up to -sec " & -sec cluster " for up to -sec " " for up to -sec " " for up to -sec " Concealed Wiring Installation Pelco's aluminum gusseted tubes allow wire entry at any point. vinyl insert conceals wiring from mast arm to signal head. Simply run wire throught field-drilled hole in mast arm, through Astro-Brac, and into support tube. Hollow lower arm provides a channel for wire to be fed into signal head. 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com Page T- //0
17 Hardware Kits HARDWARE KIT: -Way Arm, ¼"-0, Zinc Slotted Washer & Stainless Fasteners... AB-00 Stainless Slotted Washer & Stainless Fasteners... AB-0 -Way CGB Arm, ¼"-0, Zinc Slotted Washer & Stainless Fasteners... AB-0 -Way M Arm, ¼"-0, Stainless Fasteners... AB-0 -Sec. Cluster, ¼"-0, Zinc Slotted Washer & Stainless Fasteners... AB-00 Stainless Slotted Washer & Stainless Fasteners... AB-0 -Sec. Cluster M, ¼"-0, Stainless Fasteners... AB-00 U-BOLT KIT, /"-, Stainless... AB-0 CLAMP SCREW KIT, Astro-Brac, /"- Galvanized Clamp Screw & Stainless Fasteners... AB-00-GLV Stainless Clamp Screw & Stainless Fasteners...AB-00-SS CLAMP SCREW KIT, Mini-Brac, /"- Galvanized Clamp Screw & Stainless Fasteners... AB-00-GLV Stainless Clamp Screw & Stainless Fasteners...AB-00-SS SLOTTED GASKET, Neoprene... AB-0 SLOTTED WASHER: Zinc Plated... SE-0-ZN Stainless Steel...SE-0-SS LOCK WASHER, Split, ¼", Stainless... FS-0-SS BOLT, Hex. Hd., ¼"-0 x ½", Stainless... FS-0-SS SET SCREW, Sq. Hd., /"- x /", Stainless... FS-0 ADAPTER RING, M... AB-0 BOLT, Hex. Hd., ¼"-0 x ", Stainless... FS-0-SS U-BOLT, /"- x -/" x -/" x /", Stainless... FS-00-SS LOCKWASHER, Split, /", Stainless... FS-0-SS NUT, Hex., /"-, Stainless... FS-0-SS. All hardware kits are supplied standard with stainless fasteners (size /" or less). 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com /0/0 Page T-
18 Mark I Terminal Compartments These tensile aluminum alloy clamp kits provide strength with maximum adjustability and commplete clamping versatility. They allow for a quicker, easier installation while providing a stronger clamping mechanism. Complete with all necessary attaching hardware. BAND LENGTH: " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole MARK I TERMINAL COMPARTMENT CLAMP KIT: Band Mount... AB-0 Band Mount For Large Dia. Poles... AB-0 Cable Mount... AB-0 CLAMP SCREW KIT, Galv. Screw & Stainless Hdwr.... AB-00 BAND, /", Stainless... AB-0 CABLE ASSEMBLY, Galv. Screw & Stainless Hdwr.... AB-00 U-BOLT KIT, /"-, Stainless... AB-0. All assemblies are supplied standard with stainless fasteners and natural aluminum alodine coating. Stainless upgrade to include stainless steel clamp screw where applicable.. All Mark I Terminal Compartments are supplied with a -circuit terminal strip.. Please specify options when ordering. BAND LENGTH: " fits."-" dia. pole " max. fits."-" dia. pole CABLE LENGTH: " fits "-." dia. pole " fits "-." dia. pole " fits "-." dia. pole 0 W. th St., Edmond OK FAX: pelco@pelcoinc.com Page T- //0
CAMERA MTGS. Astro-Brac 1-Piece Camera Bracket Stellar Series
Astro-Brac 1-Piece Camera Bracket Stellar Series AS-3004 SH-0514 SH-0514 Stellar Series Mount, Alum AS-0170 - - - 46=46 : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify by including -SS in the part number,
More informationPelco manufactures a variety of sign brackets in rigid and free-swinging mounts for both flat and internally illuminated signs.
Astro Sign-rac Overhead Street Name Signs Stellar Series A-0502 Sign Clamp AS-3004 AS-3009 Astro Sign-rac, Stellar and Mount for Overhead Street Name Signs AS-0128 - - - and and : 29, 36, 42, 48, 56, 72,
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationDB 18 & DB 18E Options
DB 8 & DB 8E Options Assembly Manual Boom Truss Element Truss 6m Passive Inventory check DB 8 & DB 8 E Boom Truss Kit 7-004-0 QTY Part # Description 6 60-0045 /6 wire clips 4 60-0048 /6 Thimble 4 60-0044
More informationINSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS
INSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS FOR YOUR SAFETY, FOLLOW THE INSTALLATION DIRECTIONS GENERAL DESCRIPTION:
More informationNordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationEZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast
EZ-48-3AB-125-35 Weather Station Mounting Tripod and Mast EZ-125-35M 35 Mast Extension (Optional) EZ-125-SK Stake Kit (Optional) EZ-46-3 Tar Pad Kit (Optional) EZ-GWA Guy Wire Kit (Optional) Ambient Weather
More informationF-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
More informationTRAFFIC ACCESSORIES. GPL Geometrically Programmed Louvers
GPL Geometrically Programmed Louvers The Pelco GPL is a precisely aimed and controlled traffic signal louvering system. Drivers see a full circle of bright projected light when they are within the preset
More informationItem No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
More informationCable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers
SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the
More informationCDGRD-10. Grounding. Solutions For Comm/Data Applications
CDGRD-10 Grounding Solutions For Comm/Data Applications Overview & Table of Contents Cooper B-Line s Grounding products for rack & runway provide a complete solution for grounding metal supports. The offering
More informationSection M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationAUTOMATION TOOLING CATALOG ENGINEERING DATA & COMPONENT SELECTION CATALOG # 62612
AUTOMATION TOOLING CATALOG ENGINEERING DATA & COMPONENT SELECTION CATALOG # 62612 Len & Jerry's specializes in finding solutions to reduce: Weight deflection/vibration frequency cost Problems found frequently
More informationBrackets and Tenons. Product Specifications. PB Series
Product Specifications FINISH Exclusive Colorfast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation
More informationPSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS AC AND DC GENERATOR SCHEMATIC ENGINE GENERATOR ASSEMBLY REF Description QTY PSS10 PSS12 1 Engine, Honda GX620K1VXC2 Code 637220 1 99779-000 GX670VXC2 Code 637220
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationI BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
More informationMounting Tripod Kit Installation Manual
Mounting Tripod Kit Installation Manual For use with Davis s wireless and cabled Vantage Pro2 weather stations, the Mounting Tripod simplifies installation. The tripod supports the Integrated Sensor Suite
More informationI-Line. Accessories. Essential cable installation products for corrugated, smooth wall, and braided cables
I-Line TM Essential cable installation products for corrugated, smooth wall, and braided cables Installation Coaxial cable installation components for corrugated, smooth wall and braided cables Proven
More informationPOLE MOUNT SYSTEM EX-3 INSTALLATION
May 2014 POLE MOUNT SYSTEM EX-3 INSTALLATION The Pole Mount System EX-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures. The
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationSECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationFLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS ASSEMBLY & INSTALLATION INSTRUCTIONS KIT P/N 510-42000-00 KIT P/N 510-42010-00 KIT P/N 510-42015-00
FLOE DOCK STEPS FOR ROLL-IN AND SECTIONAL DOCKS ASSEMBLY & INSTALLATION INSTRUCTIONS KIT P/N 0-000-00 KIT P/N 0-00-00 KIT P/N 0-0-00 TOOLS REQUIRED () /" WRENCHES OR SOCKETS TAPE MEASURE TORQUE WRENCH
More informationFUTURE MOBILITY HEALTHCARE APPRECIATES YOUR BUSINESS. OUR CUSTOMER SERVICE REPRESENTATIVES CAN BE CONTACTED AT: TO PLACE ORDERS: (905) 671-1661
PARTS MANUAL FUTURE MOBILITY HEALTHCARE APPRECIATES YOUR BUSINESS. OUR CUSTOMER SERVICE REPRESENTATIVES CAN BE CONTACTED AT: TO PLACE ORDERS: (905) 671-1661 FOR YOUR CONVENIENCE YOU MAY ALSO PLACE ORDERS
More information2.4M SERIES 1241 ANTENNA
4096-859 Revision A August 7, 2012 2.4M SERIES 1241 ANTENNA GENERAL DYNAMICS SATCOM Technologies 1500 Prodelin Drive Newton NC 28658USA Phone 828-464-4141 www.gdsatcom.com Prodelin Corporation Page 1 8/17/2012
More information2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
More informationRAIN COLLECTOR S HELF MANUAL
RAIN COLLECTOR S HELF MANUAL The Rain Collector Shelf provides a good mounting support for your Rain Collector II. The Rain Collector Shelf is designed to be attached to Davis Sensor Mounting Arm, and
More informationCable Tie Mounting Bases
Temperature Rating: 0ºC to 66ºC (32ºF to 150ºF) *Synthetic Rubber Adhesive Choose from adhesive-backed, epoxy or screw mounting bases! Available in a variety of materials for both indoor and outdoor use
More information1-2 Pair Drop Wire Clamp
ADH -2 Pair Drop Wire Clamp Clamps, Drop Neoprene Shim Dimpled Shim Serrated Shim Used to support one and two pair telephone drop wire at span clamps, drive hooks, and various drop attachments. Aluminum
More informationPOLE MOUNT SYSTEM-3 INSTALLATION
1 May 2014 POLE MOUNT SYSTEM-3 INSTALLATION The Pole Mount System-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker products to be mounted to pole structures. The only
More informationEZ-Steer Assisted Steering System
EZ-Steer Assisted Steering System Installation Instructions Platform Kit P/N 53059-54 Case IH CVX 1135 CVX 1145 CVX 1155 CVX 1170 CVX 1190 CVX 1195 CVX 135 CVX 145 CVX 155 CVX 175 CVX 195 New Holland TVT
More informationCall for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
More information3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
More informationInstallation Guide. WSD-100 Wind Speed and Direction Sensor For XR5 Data Loggers. February, 2011
WSD-100 Wind Speed and Direction Sensor For XR5 Data Loggers Installation Guide February, 2011 Pace Scientific Inc www.pace-sci.com Tel: 704-799-0688 sales@pace-sci.com 1 Disclaimer The following warranty
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationInstallation Instructions Hustler 6-BTV Trap Vertical
Installation Instructions Hustler 6-BTV Trap Vertical ASSEMBLY 1. Check the package contents against the parts list on page 2. 2. WARNING. Installation of this product near power lines is dangerous. For
More informationOPW 400 and 500 Series Multi-Port Spill Containment Manholes. Model Descriptions. Features. Listings and Certifications
FSA400 Model s u OPW 411 Series features a flushmounted manhole lid and raised dual dam and groove spill container rings, with P2105 Buckets using OPW 1-2105 Style Slip-On 5-gallon containers. Base is
More informationWind Direction Smart Sensor (S-WDA-M003)
(S-WDA-M003) The Wind Direction smart sensor is designed to work with HOBO Stations. The smart sensor has a plug-in modular connector that allows it to be added easily to a HOBO Station. All sensor parameters
More informationArecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual
0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security
More informationINDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
More informationSmall Flat Panel Lift Arm FSA-1004 and KSA-1004
I N S T A L L A T I O N I N S T R U C T I O N S Small Flat Panel Lift Arm FSA-1004 and KSA-1004 The Lift Arm is an accessory that can be used with a broad range of Small Flat Panel Displays. The allows
More informationAM/FM ANTENNA RELOCATION KIT
-J0 REV. 008-09-0 AM/FM ANTENNA RELOCATION KIT GENERAL Kit Number 766-09 Models This kit is used to relocate a fender-mounted AM/FM antenna to a Detachable Tour-Pak on specific model motorcycles. For model
More informationBolted Connectors & Terminals
Disconnect Tee Connecr Type ADT5 75 Body 90 Nom. Function: ADT connecrs provide a convenient means of connecting lugged service conducrs overhead mains conducrs. Construction: Body - High strength cast
More informationIs your concept unique?
wirerodsystems STRUCTURAL structural residential landscape coercial retail Sta-Lok Terminals Ltd are one of the world s leading manufacturers of stainless steel fittings for wire ropes, rods & fabricated
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationTECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER 1.800.591.9360 TECHNICAL ASSISTANCE FAX: 1.626.855.4894
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 9744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS FREEZE RESISTANT WALL MOUNTED EMERGENCY EYEWASH
More informationSECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
More information2 & 5-Wire Overfill Sensors
2 & 5-Wire Overfill Sensors Optic overfill sensors detect the presence of liquid at a preset level. The new Civacon Universal 2 & 5-Wire Sensor is fully compatible with all our current Sensors and Monitors,
More informationM2 Antenna Systems, Inc. Model No: KT34M2
M2 Antenna Systems, Inc. Model No: KT34M2 10m f, MHz G, dbi F/B, db 28.0 7.3 18 28.2 7.3 23 28.4 7.4 25 28.6 7.5 24 29.2 7.6 20 15m f, MHz G, dbi F/B, db 21.0 6.9 19 21.1 6.9 22 21.2 7.0 24 21.3 7.0 24
More informationSolstice/Sky Water Pump Replacement
Solstice/Sky Water Pump Replacement The water pump on the Solstice/Sky is starting to need replacement on some vehicles. This guide will help in replacing the water pump while the engine is still in the
More informationHome Signal Distribution Kit for Cable TV Plus SIRIUS
Home Signal Distribution Kit for Cable TV Plus SIRIUS For Use With a Single SIRIUS Radio Installation Manual Thank you for purchasing the Home Signal Distribution Kit for Cable TV Plus SIRIUS The Home
More informationHALF COUPLER HALF COUPLER
HALF COUPLER HALF COUPLER Lightweight & low profile KUPO professional couplers are constructed from high tensile aluminum extrusion and have been developed for installa ons where load capaci es of up to
More informationwith installation dynafact boost GAUGE this manual is for use with systems 64050-64054
owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 GENERAL INSTALLATION PRACTICES This manual is an installation guide for all 1. Banks DynaFact
More informationPart Name/Description Part Number Quantity. Power Cable 4000950-5 1
Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Power Cable 4000950-5 1 Raven Harness Adapter Kit 4100525 1 Installation Instructions
More informationRequired Supplies for Installing Check Tag Assembly
Check Tag Assembly and Antenna Installation Instructions 411922-004 05/10 This document explains how to install and connect the check tag assembly and check tag antenna. Required Supplies for Installing
More informationHigh Flow Air Cleaner Assembly
34-0112 High Flow Air Cleaner Assembly 34-0114 34-1128 34-0113 34-0105 34-0178 Big Sucker Air Filter Kits for Carbureted or Fuel Injected Twin Cam and EV2 Big Twin Models. The all-in-one backing plate
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More informationTABLE OF CONTENTS DT7K INSTRUCTION MANUAL TABLE OF CONTENTS 1-19-00E DT7K
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL SECTION 100 DESCRIPTION & SPECIFICATIONS 17459 INSTALLATION DIMENSIONS - DT7K 17384 MOUNTING HOLE TEMPLATE S14930 INSTALLATION DRAWING - 14930 MOUNTING PEDESTAL
More informationPARTS & SERVICE MANUAL for CONTEMPO SERIES WARMER LAMPS
PARTS & SERVICE MANUAL for CONTEMPO SERIES WARMER LAMPS Merco Contempo Warmer Lamps offer graceful, dramatic styling to match any décor. They are made of exacting tolerance from heavy duty, solid, mandrelspun
More informationIn-Ground Basketball System Owners Manual
In-Ground Basketball System Owners Manual Customer Service Center N53 W4700 South Corporate Circle Sussex, WI 53089 U.S.A. Write Model Number From Box Here: WARNING! 3 Capable Adults REQUIRED TOOLS AND
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More informationStandard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More informationSPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
More informationINSTALLATION INSTRUCTIONS
Turbo Tube Slide INSTALLATION INSTRUCTIONS C A U T I O N Do not climb on the outside of the slide This slide is designed for home use only, not for Public Playgrounds PlayCore, Inc. 2004 Copyrighted Material.
More informationCLASS III TRUCK PARTS Baker
CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie
More informationILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationRAIL FREE SOLAR ROOF MOUNT
RAIL FREE SOLAR ROOF MOUNT Utilizes EcoFasten Solar s patented technology Rock-it system Designed with the installer in mind. EcoFasten Solar specializes in solar roof attachments that are the easiest
More information92-00 Civic/ 94-01 Integra/ 93-97 Del Sol/ 92-95 CRX Rear Kit Part No. 75540
92-00 Civic/ 94-01 Integra/ 93-97 Del Sol/ 92-95 CRX Rear Kit Part No. 75540 www.airliftperformance.com MN-514 (06409) NPR 4762 Please read these instructions completely before proceeding with installation
More informationStep 1. Item 6. Item 1
Voltage Regulators QD3/T350 Motor Replacement Kit Kit Number 57A63675100B Service Information S225-50-35 Contents General..................................... 1 Parts Supplied...............................
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationS OUNTING INSTRUCTION M M o u n t i n g k i t 2 &
M O U N T I N G I N S T R U C T I O N S instructions This document is protected by copyright. The SICK AG company retains this right. Reproducing this document in whole or part is only permissible within
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationInstallation Instructions:
Portable Guardrail System Model Numbers: 7900060, 7900061, 7900062, 7900063 Installation Instructions: Portable Guardrail System This instruction is intended to meet the Manufacturer s Instructions requirement
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationINSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
More informationBUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationAssembly Instructions for the InteliTrack 3000 Rail Tracking System
Assembly Instructions for the InteliTrack 3000 Rail Tracking System InteliTrack is a trademark of Sedona Solar Technology. Sedona Solar Technology 16 April 2013 1 1. Before you begin WARNING Safety equipment
More informationCat. No. Finishes & Materials. Standard Finish: Electrogalvanized. Change suffix to SS6(C).
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
More informationMEDIUM FLAT PANEL DISPLAY STATIC MOUNT MSR Series
INSTALLATION INSTRUCTIONS MEDIUM FLAT PANEL DISPLAY STATIC MOUNT The static mount accommodates medium flat panel displays weighing up to 125 lbs (57 kgs). The teardrop holes in the mount allow for quick
More informationFittings REGULAR TENSION BANDS MEDIUM TENSION BANDS BEVELED TENSION BANDS
Fittings REGULAR TENSION BANDS 14 ga. x 3/4 1-3/8 010101 250.12 lb. 1-5/8 010102 250.14 lb. 1-7/8 010103 250.15 lb. 2-3/8 010104 250.18 lb. 2-7/8 010105 100.20 lb. 3 Full 010106 100.21 lb. 3-1/2 010107
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
More informationSUPPORT EQUIPMENTS 7 E 01-12
SUPPORT EQUPMENTS 7 E 0- CLAMPS type C 7. BRACKETS type MA and SUPPORT RNG type AG 7. U-BOLTS type U and PLASTC SADDLES type P 7. SNGLE ACCUMULATOR UNT type BAS 7.4 EPE TALANA s.r.l. - Viale Spagna, 009
More informationCUSTOM AUXILIARY FORWARD LIGHTING KIT
-J0 REV. 0--0 CUSTOM AUXILIARY FORWARD LIGHTING KIT GENERAL Kit Number -0, 0000 Models This Custom Auxiliary Lighting Kit adds lamps and turn signals to 00 and later FLHX model motorcycles. Additional
More informationUniversal Vehicle Power Supply 9007AX01. Installation Instructions
Universal Vehicle Power Supply 9007AX01 Installation Instructions Disclaimer Honeywell International Inc. ( HII ) reserves the right to make changes in specifications and other information contained in
More informationOVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More informationThis mount uses concrete parking bumpers and a Davis tripod to create a mounting solution for nonpenetrable
NON-PENETRATING FLAT ROOF MOUNT Application Note 18 For Any Davis Weather Station Installed on a Mounting Tripod Introduction This application note describes various mounting solutions for non-penetrable
More informationSTIHL Precision Series Hand Tools
STIHL Precision Series Hand Tools Spare Parts List A PH 80 Hedge Shear M PP 900/700 Pole Pruner Head Assembly B PL 0 Lopper N PP 900 Pole Pruner Head Parts C PL 0 Lopper O PS 0 Pruning Saw D PL 0 Lopper
More informationCabinets 101: Configuring A Network Or Server Cabinet
Cabinets 101: Configuring A Network Or Server Cabinet North, South and Central America White Paper May 2012 www.commscope.com Contents Background Information 3 What is a network or server cabinet? 3 What
More informationCasement/Awning Window Parts Reference Catalog
Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100
More information