Fram Alloy Blue kjetting og komponenter Fram Alloy Blue chain, slings and attachments
|
|
- Eustace Andrews
- 8 years ago
- Views:
Transcription
1 2007 Fram Alloy Blue kjetting og komponenter Fram Alloy Blue chain, slings and attachments
2 Kjættingfabriken AS ble grunnlagt i Hovedkontor og produksjonsutstyr er i dag på Sannidal i Kragerø. Avdelingskontorer og lager på Finnsnes i Troms. I tillegg til prøveutstyr på Sannidal er det også en 100 tonns strekkprøvemaskin på Finnsnes. Kjættingfabriken AS har produksjonsutstyr for produksjon av kjetting og tilbehør i h.t. internasjonale standarder. Vårt varemerke er FRAM. Kjættingfabriken was founded in The main office and works are located at Sannidal near Kragerø, 200 km s south of Oslo. Branch office and store also at Finnsnes in Northern Norway. At Finnsnes we have a testing machine with pullforce 100 metric tonnes. Kjættingfabriken provides machines for production of chains and accessories, delivered according to international standards. The Q.A.-system include all activities from sub supplies to the delivery of finished goods. The trade mark of Kjættingfabriken is FRAM. Produkter: FRAM kjetting og komponenter. Kortlenket-halvlanglenket og langlenket kjetting. Løkker, løftehoder, kroker og beslag. Spesialkomponenter for løft og surring, etc. Kjetting leveres også varmforsinket. Rustfri, syrefast og umagnetisk kjetting og beslag. Hjulkjetting For lastebiler, traktorer, etc. Products: FRAM chains and attachments Short-link chain, mid-link chain, long-link chain, links, master quad assemblies, hooks and other fittings. Equipment designed for special lifting and lashing operations. The chain can also be delivered Hot Dip Galvanized. Stainless/acid resistant chain and components. Tyrechains For trucks, tractors, etc. 2 KJÆTTINGFABRIKEN AS
3 1 Kjetting Chains Gruppeinndeling 2 Koplingselementer Coupling components 3 Beslag (løkker, kroker etc.) Fittings for chain (links, hooks etc.) 4 Øyebolter/muttere Eyebolts/eyenuts 5 6 Saensatte kjettingredskaper Chain slings Produksjon av spesialløfteredskap Special fittings 7 Taljer Hoists 8 9 Rustfritt/syrefast kjetting og deler Stainless/acid resistant chains and components Surrings- og sikringsutstyr Lashing equipment 10 Kabelarer Chain weels 11 Lastsurring og mykløft i polyester Webbing for lashing and lifting 12 Ståltau Wireropes
4 Fram kjetting Omregningstabell tonn - kn Tonn kn Tonn kn Tonn kn Tonn kn Tonn kn Tonn kn 1 9, , , , , ,6 1,5 14,7 23,5 230,5 45,5 446,2 67,5 661,9 94,5 926,7 116,5 1142,5 2 19, , , , , ,4 2,5 24,5 24,5 240,3 46,5 456,0 68,5 671,8 95,5 936,5 117,5 1152,3 3 29, , , , , ,2 3,5 34,3 25,5 250,1 47,5 465,8 69,5 681,6 96,5 946,3 118,5 1162,1 4 39, , , , , ,0 4,5 44,1 26,5 259,9 48,5 475,6 70,5 691,4 97,5 956,1 119,5 1171,9 5 49, , , , , ,8 5,5 53,9 27,5 269,7 49,5 485,4 71,5 701,2 98,5 966,0 120,5 1181,7 6 58, , , , , ,6 6,5 63,7 28,5 279,5 50,5 495,2 72,5 711,0 99,5 975,8 121,5 1191,5 7 68, , , , , ,4 7,5 73,5 29,5 289,3 51,5 505,0 73,5 720,8 100, ,5 1201,3 8 78, , , , , ,2 8,5 83,4 30,5 299,1 52,5 514,8 74,5 730,6 101,5 995,4 123,5 1211,1 9 88, , , , , ,0 9,5 93,2 31,5 308,9 53,5 524,7 75,5 740,4 102,5 1005,2 124,5 1220, , , , , , ,8 10,5 103,0 32,5 318,7 54,5 534,5 76,5 750,2 103,5 1015,0 125,5 1230, , , , , , ,6 11,5 112,8 33,5 328,5 55,5 544,3 77,5 760,0 104,5 1024,8 126,5 1240, , , , , , ,4 12,5 122,6 34,5 338,3 56,5 554,1 78,5 769,8 105,5 1034,6 127,5 1250, , , , , , ,3 13,5 132,4 35,5 348,1 57,5 563,9 79,5 779,6 106,5 1044,4 128,5 1260, , , , , , ,1 14,5 142,2 36,5 357,9 58,5 573,7 80,5 789,4 107,5 1054,2 129,5 1270, , , , , , ,9 15,5 152,0 37,5 367,7 59,5 583,5 81,5 799,2 108,5 1064,0 130,5 1279, , , , , , ,7 16,5 161,8 38,5 377,6 60,5 593,3 82,5 809,0 109,5 1073,8 131,5 1289, , , , , , ,5 17,5 171,6 39,5 387,4 61,5 603,1 83,5 818,9 110,5 1083,6 132,5 1299, , , , , , ,3 18,5 181,4 40,5 397,2 62,5 612,9 84,5 828,7 111,5 1093,4 133,5 1309, , , , , , ,1 19,5 191,2 41,5 407,0 63,5 622,7 85,5 838,5 112,5 1103,2 134,5 1319, , , , , , ,9 20,5 201,0 42,5 416,8 64,5 632,5 91,5 897,3 113,5 1113,1 135,5 1328, , , , , , ,7 21,5 210,8 43,5 426,6 65,5 642,3 92,5 907,1 114,5 1122,9 136,5 1338, , , , , , ,5 22,5 220,6 44,5 436,4 66,5 652,1 93,5 916,9 115,5 1132,7 137,5 1348,4 4
5 1 Gruppe 1 Kjetting Group 1 Chains Kjetting som brukes i varme / Variations in WLL due to use at various temp. 6 Slitasje på kjetting / Wear on chain links Hva menes med et redskaps arbeidsvinkel? / What is a working angle.. 6 Hva menes med sikkerhetsfaktor? / What is factor of safety Kvalitet Klasse 8, / Grade Kjetting, farget / Chains painted Kortlenket, NS-EN / Chain, short link NS-EN 818-2, grade Kortlenket, klasse 8 RS / Short link chains, grade 8 RS Kortlenket kalibrert, klasse 8 RS / Short link calibrated chains, grade 8 RS 7 Halvlanglenket / Half long link chains Langlenket / Long link chains Kjetting, varmforsinket / Chains, hot dip galvanized Kortlenket / Short link Halvlanglenket / Half long link Langlenket / Long link Kjetting, DIN 766 / Chains, according to DIN 766 Kortlenket, varmforsinket / Short link, hot dip galvanized Kortlenket, kalibrert / Short link, calibrated Kjetting, usertifisert / Chains, not with certificate Kortlenket, varmforsinket / Short link, hot dip galvanized Langlenket, varmforsinket / Long link, hot dip galvanized Forniklet / Nickel plated
6 Variasjon i WLL ved bruk i varierende temperaturer Variations in WLL due to various temperature Temperatur C Reduksjonsfaktor Temperature in C Reductionfactor 40 < t < t 300 0, < t 400 0,75 over/ ikke tillatt excess 400 Not permissible Dersom kjetting blir oppvarmet til over 400 C må den ikke brukes, men returneres til produsent for kontroll og eventuell ny varmbehandling. If chain reach temperatures in excess of the max permissible temperature in table, they should be withdrawn from service and referred to the manufacturer. Slitasje på kjetting: Wear on chain links: Max tillatt slitasje må ikke overskride 10% av materialdiameteren, målt over 2 diametere (D1 + D2), 90 forskjøvet i forhold til hverandre. D.v.s. at gjenværende diameter D1 + D2 må være minst 90% av nominell dia. Dn. (Se fig.). 2 Wear by contact with other objects usually occurs on the outside of straight portions of the links where it is easily to be seen and measured. Wear between adjoining links are hidden. The chain should be slack and adjoining links rotated to expose the inner end of each link. Inter-link wear, as measured by taking the diameter indicated (D1) and one at right angles. (D2) may be tolerated until the mean of theis diameters has been reduced to 90% of nominal diameter (Dn) (See figure) provided. Example: Eksempel: 20 short link chain 20 kortlenket kjetting Målt: D1 = 16 D2 = = x 0,9 = 18 Altså for stor slitasje og kjettingen skal kasseres. Measured: = x 0,9 = 18 D1 = 16 D2 = 18 The wear is to great, the chain has to be scraped. Arbeidsvinkel: Working angle: Sikkerhetsfaktor: Factor of safety: Vinkelen mellom den loddrette linje og hvert ben i et flerparters kjettingløfteredskap. The angle from vertical to each leg of a sling. Minimum bruddkraft WLL Minimum breakingforce WLL 6 KJÆTTINGFABRIKEN AS
7 Fram Alloy Blue chains Fram Alloy Blue kjetting Fram kortlenket kjetting NS-EN klasse 8 Fram short link chains NS-EN grade 8 B L D Varenr. Dim. WLL Prøvekraft Min. bruddkraft Mål i /Dim Kg/mtr. Item no. Code 4:1 Proof force Min. break. force tonn/ton kn kn D L B x21 1,5 38,5 61, ,3 1,05 2 8x24 2,0 50,3 80, ,4 1, x30 3,15 78, ,0 2, x39 5, ,2 3, x48 8, ,4 5, x60 12, ,0 8, x66 15, ,0 10, x78 21, ,8 15,2 9 32x96 31, ,0 23,00 Fram Alloy Blue kortlenket kjetting klasse 8 Blåfarget RS Fram Alloy Blue short link chains grade 8 RS B L D Varenr. Dim. Prøvekraft Min. bruddkraft Mål i /Dim Kg/mtr. Item no. Code Proof force Min. break. force kn kn D L B x24 40,2 80, ,4 1, x ,0 2, x ,2 3, x ,4 5, x60 251, ,0 8,60 Fram Alloy Blue kalibrert kortlenket kjetting - klasse 8 RS Blank (Tilhørende kabelarer side 62.) Fram Alloy Blue short link calibrated chains grade 8RS (Matching wheels page 62.) Varenr. Dim. WLL Prøvekraft Min. bruddkraft Mål i /Dim Kg/mtr. Item no. Code 4:1 Proof force Min. break. force tonn/ton kn kn D L B B L D x 24,0 1,5 38,5 61,8 7 24,0 10,5 1, x 26,5 2,0 50,3 80,4 8 26,5 11,0 1, x 30,5 3,15 78, ,5 13,5 2, x 39,5 5, ,5 16,5 3, x 48,0 8, ,0 21,0 5, x 60,5 12, ,5 26,0 8, x 75,5 20, ,5 33,0 13, x 96,5 31, ,5 42,0 23,00 KJÆTTINGFABRIKEN AS 7
8 Fram Alloy Blue kjetting Fram Alloy Blue chains Fram Alloy Blue halvlanglenket kjetting Blåfarget Fram Alloy Blue half long link chains Varenr. Dim. Prøvekraft Bruddkraft Mål i /Dim Kg/mtr. Item no. Code Proof force Breaking force kn kn D L B B L D x , x , , x , x , ,3 Fram Alloy Blue langlenket kjetting Blåfarget Fram Alloy Blue long link chains Varenr. Dim. Prøvekraft Bruddkraft Mål i /Dim Kg/mtr. Item no. Code Proof force Breaking force kn kn D L B B L D x , x , x , , x , , x , x , , x , x , ,0 8 KJÆTTINGFABRIKEN AS
9 Fram Alloy varmforsinket kjetting Fram Alloy hot dip galvanized chains Fram Alloy varmforsinket kortlenket kjetting Fram Alloy short link hot dip galvanized chains Varenr. Dim. Prøvekraft Bruddkraft Mål i /Dim Kg/mtr. Item no. Code Proof force Breaking force kn kn D L B B L D x 21 29,4 48, ,3 1, x 24 39,2 65, ,0 1, x 30 63,7 108, ,5 2, x ,0 177, ,5 3, x ,0 275, ,0 5, x ,0 441, ,0 8, x ,0 520, ,0 11, x ,0 686, ,0 14, x ,0 1079, ,0 23,50 Fram Alloy varmforsinket halvlanglenket kjetting Fram Alloy half long link hot dip galvanized chains Varenr. Dim. Prøvekraft Bruddkraft Mål i /Dim Kg/mtr. Item no. Code Proof force Breaking force kn kn D L B B L D x , x , x , x ,3 Fram Alloy varmforsinket langlenket kjetting Fram Alloy long link hot dip galvanized chains Varenr. Dim. Prøvekraft Bruddkraft Mål i /Dim Kg/mtr. Item no. Code Proof force Breaking force kn kn D L B B L D x 57 47,1 78, , x 66 73,5 121, , x , , x , , x , x , , x , x , ,0 KJÆTTINGFABRIKEN AS 9
10 Diverse bløtjernskjetting Various chains Kortlenket varmforsinket kjetting DIN 766 Short link hot dip galvanized chains, DIN 766 Varenr. Dim. Maks. brukslast Prøvekraft Bruddkraft Mål i /Dim Kg/mtr. Item no. Code Ultimate Proof force Breaking force working load kn kn D L B tonn/ton x 18,5 5 18,5 7 0,5 2 6 x 18,5 6 18,5 8 0,8 3 8 x 24 0,630 12,7 24, , x 28 1,000 19,6 39, , x 31 1,120 22,6 44, , x 36 1,600 31,4 62, , x 45 2,500 49,0 98, , x 56 4,000 78,5 156, ,0 Kortlenket kalibrert kjetting DIN 766 Blank Overflateherdet (Tilhørende håndhjul og kabelarer side ) Short link calibrated chains, DIN 766. Bright polished. Case hardened (Matching wheels, page ) Varenr. Dim. WLL Prøvekraft Bruddkraft Mål i /Dim Kg/mtr. Item no. Code 4:1 Proof force Breaking force tonn/ton kn kn D L B x 18,5 5 18,5 7 0,5 2 6 x 18,5 6 18,5 8 0,8 3 7 x 22 0,450 8,8 17, ,0 4 8 x 24 0,630 12,7 24, ,4 5 9,5 x 27 0,850 16,7 33,3 9, , x 31 1,120 22,6 44, , x 36 1,600 31,4 62, , x 45 2,500 49,0 98, , x 56 4,000 78,5 156, ,0 10 KJÆTTINGFABRIKEN AS
11 Various chains Diverse bløtjernskjetting Varmforsinket kortlenket kjetting usertifisert Short link chains hot dip galvanized not with certificate Varmforsinket langlenket kjetting usertifisert Long link chains hot dip galvanized not with certificate Forniklet kjetting usertifisert Nickel-plated not with certificate Varenr. Dim. Mål i /Dim Kg/mtr. Item no. Code D L B /8-4 4,0 19 5,5 0,3 2 3/16-5 5,0 22 7,5 0,5 3 1/4-6,5 6,5 24 9,0 0,9 4 5/16-8 8,0 25,5 10,5 1,4 5 3/ , ,5 2,1 6 7/ , ,0 2,6 7 1/ , ,0 3,7 Varenr. Dim. Mål i /Dim Kg/mtr. Item no. Code D L B x ,2 0, x ,2 0, x ,0 0, x ,5 0, x ,0 0, x ,5 0, x ,0 1, x ,0 1, x ,5 1,70 Varenr. Dim. Mål i /Dim Kg/mtr. Item no. Code D L B , ,12 KJÆTTINGFABRIKEN AS 11
12 12
13 2 Gruppe 2 Koplingselementer Group 2 Coupling components Koplingselementer / Coupling components Leddet koplingsløkke / Coupling links Rundslings kopling / Roundsling coupling Omega koplingsløkker / Omega couplinglinks Sjakler / Shackles Sjakkel kort type m/øyebolt, type A / Short type A with eye pin Sjakkel kort type m/sporbolt, type B / Short type B with slotted head pin Sjakkel kort type m/mutterbolt, type C / Short type C with nut pin Sjakkel lang type m/øyebolt, type A / Long type A with eye pin Sjakkel lang type m/mutterbolt, type C / Long type C with nut pin Red-Pin harpesjakler m/mutterbolt/splint / Red-Pin bow-shackles Red-Pin harpesjakler m/mutterbolt/splint, offshore / Red-Pin bow-shackles, offshore. 16 Usertifiserte sjakler / Shackles without certificate Svivler / Swivel Kulelagersvivel type SKL / Ball bearing swivel Koplingsløkke for kulelagersvivel / Coupling links for ball bearing swivel Reparasjonssett / Spare parts Rep.sett kompl. for Fram koplingsløkke / Spare parts for Fram coupling links Hylse for Fram koplingsløkke / Bush for Fram coupling links
14 Koplingselementer Coupling components Leddet koplingsløkke Type YA Connecting Link Code YA NS-EN Varenr. WLL For kjett. Type Mål i /Dim Kg Item no. 4:1 For chain Code N.W. tonn dim K A D B , YA-7/ ,2 3 3,15 10 YA ,3 4 5,30 13 YA ,7 5 8,00 16 YA ,1 6 12, YA-18/ ,7 7 15,00 22 YA ,0 8 21,20 26 YA ,6 9 30,00 32 YA ,6 Rundsling kopling Type YW Round Sling Coupling Code YW NS-EN Varenr. WLL For kjett. Type Mål i /Dim Kg Item no. 4:1 For chain Code N.W. tonn dim K W A B , YW-7/ ,2 1 3,15 10 YW ,4 2 5,30 13 YW ,7 3 8,00 16 YW ,2 4 12, YW-18/ ,9 5 15,00 22 YW ,3 6 21,20 26 YW ,0 7 31,50 32 YW ,5 Omega koplingsløkke Type YO Omega Link Code YO NS-EN Varenr. WLL For kjett. Type Mål i /Dim Kg Item no. 4:1 For chain Code N.W. tonn dim K D T P , YO-7/ ,2 2 3,15 10 YO ,4 3 5,30 13 YO ,0 4 8,00 16 YO ,4 5 12, YO-18/ ,3 14 KJÆTTINGFABRIKEN AS
15 Fram Alloy sjakler Fram Alloy shackles Sjakler kort type øyebolt type A / Shackles short type A with eye pin h 1 d 1 d 3 d 2 h 2 d 1 b 1 d 4 b 2 Varenr. Dim. WLL Mål i /Dim Kg Item no. Code 4:1 tonn b1 b2 d1 d2 d3 d4 h1 h A.06.A 2, , ,2 2 A.1.A 4, ,4 3 A.2.A 6,0 33, , ,0 4 A.3.A 10, ,2 5 A.5.A 15, ,7 6 A.6.A 25, ,2 Sjakler - kort type sporbolt type B m/splint / Shackles short type B with slotted head h 1 Sjakler - kort type mutterbolt type C m/splint / Shackles short type C with nut pin TYPE C MUTTERBOLT d 1 d 3 d 2 h 2 d 1 b 1 d 4 b 2 Varenr. Dim. WLL Mål i /Dim Kg Item no. Code 4:1 tonn b1 b2 d1 d2 d3 d4 d5 h1 h A.06.B 2, , ,2 2 A.1.B 4, , ,4 3 A.2.B 6,0 33, , ,0 4 A.3.B 10, ,1 5 A.5.B 15, ,6 6 A.6.B 25, ,9 Varenr. Dim. WLL Mål i /Dim Kg Item no. Code 4:1 tonn b1 b2 d1 d2 d3 d4 h1 h A.06.C 2, , ,2 2 A.1.C 4, ,4 3 A.2.C 6,0 33, , ,1 4 A.3.C 10, ,4 5 A.5.C 15, ,1 6 A.6.C 25, ,9 Sjakler - lang type øyebolt type A / Shackles long type A with eye pin Varenr. Dim. WLL Mål i /Dim Kg Item no. Code 4:1 tonn A B D E F H min. H max /4A 8, , /5A 7, , /6A 6, , /4A 20, ,6 2 32/5A 15, ,9 3 32/6A 11, ,1 4 45/4A 30, ,2 5 45/5A 25, ,4 6 45/6A 20, ,8 7 50/4A 50, ,4 8 50/5A 40, ,1 9 50/6A 30, ,9 KJÆTTINGFABRIKEN AS 15
16 Fram Alloy sjakler Fram Alloy shackles Sjakler - lang type mutterbolt, mutter sikret m/splint type C Shackles long type C with nut pin Sjakkel lang type kan også leveres med sporbolt. Shackle long type can be delivered with slodded head. Varenr. Dim. WLL Mål i /Dim Kg Item no. Code 4:1 tonn A B D E F H min. H max /4C 8, , /5C 7, , /6C 6, , /4C 20, ,2 2 32/5C 15, ,4 3 32/6C 11, ,6 4 45/4C 30, ,1 5 45/5C 25, ,0 6 45/6C 20, ,2 7 50/4C 50, ,8 8 50/5C 40, ,3 9 50/6C 30, , /4C 75, ,0 Harpesjakler Red-Pin m/mutterbolt / Red-Pin bow-shackles standard/offshore Leveres også i offshorekvalitet i henhold til kravene i DnV Also according to DNV Varenr. Dim. WLL Mål i /Dim Kg Varenr. Item no. Code 6:1 Item no. tonn A B C D E G Offshore /4 0, , /16 0, , /8 1, , /16 1, ,23 1 1/2 2, , /8 3, , /4 4, , /8 6, , , , /8 9, , /4 12, , /8 13, , /2 17, , /4 25, , , , /2 55, ,0 Usertifiserte sjakler varmgalvanisert / Shackles hot dip without certificate Varenr. Type D d W Varenr. Type D d W Kg Item no. H Item no. D / , /4 6,5 6, /4 6,5 6,5 12 0, / / , / / , / , / / , / , / / , / / , / / , , / / / / / / KJÆTTINGFABRIKEN AS
17 Swivel/Spare parts Svivler/Reparasjonssett Isolert kulelagersvivel Type BSI / Isulated Blank Swivels Code BSI For isolering av kran ved sveis i hengende last. Max 1500 Volt / With ball bearing, individually tested to resist 1500 Volts insulated with Test Certificate. Design for protection of overhead crane during welding operations on suspended loads. NS-EN Varenr. WLL For kjett. Type Mål i /Dim Kg Item no. 4:1 For chain Code N.W. tonn dim D L , BSI-7/ ,9 2 3,15 10 BSI ,2 3 5,30 13 BSI ,5 4 8,00 16 BSI ,4 5 12, BSI-18/ ,0 Halv koplingsløkke Type BST / Half Coupling Link Code BST Med bolt og låsehylse / With Coupling Pin and Sleeve Locking NS-EN Varenr. WLL For kjett. Type Mål i /Dim Kg Item no. 4:1 For chain Code N.W. tonn dim L A D K , BST-7/ ,1 2 3,15 10 BST ,2 3 5,30 13 BST ,4 4 8,00 16 BST ,4 5 12, BST-18/ ,1 Reparasjonssett / Spare parts For leddet koplingsløkke type YA / For Swivel Sling hook code YA Varenr. Størrelse Item no. Size / KJÆTTINGFABRIKEN AS 17
18 18
19 Gruppe 3 Beslag 3 Group 3 Components Løkker, ringer og løftehoder / Masterlinks, rings and masterlink assembles B-løkker / Masterlinks A-løkker / A-links Rings / Rings Løftehoder / Masterlink assemblies Innkortningsløkker / Adjusting links Sjakkelløkker/overgangsløkker / Joininglinks for welding B-løkker i h.t. DnV / Masterlinks according to DnV Løftehoder i h.t. DnV / Masterlinks assemblies according to DnV Kroker / Hooks Selvlukkende krok med øye, type YC Selflocking hooks with eye, code YC Selvlukkende krok med svivel, type YE Selflocking hooks with swivel, code YE Selvlukkende krok med gaffel, type YD Selflocking hooks with clevis, code YD Slavekrok med øye,type YP Slinghooks with eye, code YP Slavekrok med svivel, type YSW Slinghook with swivel, code YSW Slavekrok med gaffel, type YM Slinghook with clevis, code YM Slavekrok, type SK/Slinghook with latch, code SK Støperikrok, type YN/Eye foundery hook, code YN Krok for storsekk/ Hooks for big bag Innkortningskrok med øye, type YH Eye grab hook, code YH Innkortningskrok med gaffel, type YK Clevis grab hook, code YK Innkortningskrok med øye, type KD Eye shortning hook,code KD Rørkrok m/holdefjær/ Pipe hooks Containerbeslag / Container fittings Container krok med øye, type KA Eye container hook, code KA Gravemaskinskrok/Excavator weld on hooks Løpekrok for kjetting, type KE/Chook hook, code KE Krok for masseballer rustfri, type KMB Stainless hooks type KMB Reparasjonssett for kroker / Spare parts Reprasjonsett for kroker/spare parts, hooks
20 Løkker Links B-løkker Masterlinks A-løkker A-Links Varenr. Dim. WLL Mål i /Dim Kg Item no. Code 4:1 tonn d B L B.4 2, , B.5* 2, , B.6* 2, , B.6* 4, , B.7 3, , B.6* 6, , B.7 6, , B.6* 8, , B.7 7, , B.8 5, , B.6* 10, , B.6* 12, , , B.7 11, , B.6* 17, , B.6 28, , B.7 19, , B.6 38, , B.7 27, , B.6 45, , B.6 65, , B.6 84, ,0 Varenr. Dim. WLL Mål i /Dim Kg Item no. Code 4:1 tonn d b B L A.6 2, , A.6 3, , A.7 5, , A.6 7, , A.6 10, , A.6 12, , A.6 15, , A.6 25, , A.6 34, , A.6 40, ,0 Løkker, ringer og løftehoders WLL bestees ut fra deformasjonsgrensen, ikke ut fra min. bruddkraft. The WLL for links, rings and masterlink, assemblies, are determined from the proof load, not from the breaking force. * Tilpasset Omegaløkker. * Fits Omega. Løkker, ringer og løftehoders SWL/WLL bestees ut fra deformasjonsgrensen, ikke ut fra min. bruddkraft. The WLL for links, rings and masterlink, assemblies, are determined from the proof load, not from the breaking force. 20 KJÆTTINGFABRIKEN AS
21 Links Løkker Ringer / Rings Løftehoder / Master link assemblies Belastningstabell for løftehoder fra 0 45 Master link assemblies 0 45 Innkortningsløkker / Adjusting links SR SK Varenr. Dim. WLL Mål i / Kg Dim Item no. Code 4:1 tonn d D O.4 1, , O.6 1, , O.6 2, , O.7 4, , O.6 5, , O.6 6, , O.6 8, , O.6 10, , O.6 16, , O.7 10, ,5 11, O.6 23, , O.6 27, ,0 Varenr. Dim. WLL Toppløkke/Master Link Balanseløkke/ Intermediate M.L. Item no. Code 4:1 tonn Betegn. Mål i Betegn. Mål i Q.16.B 4,1 16.B.6 70 x B.5 51 x 95 1,2 2 Q.20.B 6,5 20.B.7 90 x B.6 70 x 120 2, Q.22.B.8 5,8 22.B x B.6 70 x 120 3,5 3 Q.22.B 8,2 22.B.6 90 x B.6 80 x 150 3,8 4 Q.25.B 10,7 25.B x B.6 80 x 150 4,5 5 Q.28.B 12,9 28.B x B.6 90 x 170 6,4 6 Q.32.B 17,1 32.B x B x 190 9,9 7 Q.38.B 28,1 38.B x B x ,2 8 Q.45.B 38,3 45.B x B x ,7 9 Q.50.B 45,0 50.B x B x ,2 10 Q.60.B 65,3 60.B x B x ,0 11 Q.70.B 84,0 70.B x B x ,0 Varenr. Dim. For kjett. WLL Mål i /Dim Kg Item no. Code For chain 4:1 dim tonn A B C D E F H / SR/11SK 7 2, ,2 2/ 2 13SR/13SK 8 2, , ,3 3/ 3 16SR/16SK 10 4, ,6 4/ 4 20SR/20SK 11 8, ,1 5/ 5 22SR/22SK 13 10, ,6 6/ 6 25SR/25SK 16 13, ,3 7/ 7 28SR/28SK 20 15, ,0 8/ 8 32SR/32SK 22 18, ,3 9/ 9 38SR/38SK 25 30, ,6 10/ 10 45SR/45SK 32 42, ,5 11/ 11 50SR/50SK 32 50, ,0 Kg KJÆTTINGFABRIKEN AS 21
Gruppe 5 Sammensatte kjettingredskaper
Gruppe 5 Sammensatte kjettingredskaper Group 5 Chain slings 5 Tabeller for symmetriske/usymmetriske løft / Tables for lifting situations.............. 36 Belastningstabeller for kjetting med sikkerhetsfaktor
More informationYEARS. Fram Alloy Blue kjetting og komponenter Fram Alloy Blue chain, slings and attachments
010 100 YEARS Fram Alloy Blue kjetting og komponenter Fram Alloy Blue chain, slings and attachments 100 YEARS Kjættingfabriken AS ble grunnlagt i 1909, og har i dag hovedkontor i Kragerø Næringspark. Bedriften
More informationKJÆTTINGFABRIKEN AS. www.kjettingfabriken.no FINNSNES OSLO HELLE
Soroya HAMMERFEST VADSØ Kvaloy TROMSØ Alteelva FINNSNES Tana BODØ Rossvatnet Vega Vikna KJÆTTINGFABRIKEN AS BERGEN Smola MOLDE Ålesund LEIKANGER Froya Hitra Rauma Lågen Lågen STEINKJER TRONDHEIM LILLEHAMMER
More informationLiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
More informationSlings, Rigging and Lifting Equipment
A printed or saved copy is an UNCONTROLLED copy. Check that it is the latest available version before use. Title: Number: SLINGS, RIGGING AND LIFTING EQUIPMENT GM-11-038-02 Version Number: 13.0 Date Revised:
More informationInstallation information. METTLER TOLEDO MultiRange Floor scales / Pit scales
Installation information METTLER TOLEDO MultiRange Floor scales / Pit scales KC300/KCS300 KC600/KCS600 KD600/KD1500 KE1500/KE3000 KES1500/KES3000 KG3000/KG6000 KN1500 Floor scales / Pit scales Contents
More informationRIGGING HARDWARE ASME B30.26. Addresses detachable lifting hardware for lifting purposes
RIGGING HARDWARE ASME B30.26 Addresses detachable lifting hardware for lifting purposes Adjustable Hardware (Turnbuckles, Eye nuts, Swivel Hoist Rings and Eyebolts Compression Hardware (Wire Rope Clips
More informationThe Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 9001.
Campbell Blocks Table of Contents Begun as a forging company in 1834, Campbell/Brewer-Titchener first manufactured horse harnesses, then carriage hardware, then horseless carriage hardware. From hardware
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationBIS Gulv / Radiator Beslag
O BIS Gulv / Radiator Beslag BIS Manifold Fixings BIS Manifold Fixing 2 BIS Pipe Protection BIS Protection Plate BIS Two-Part Floor Bend BIS Floor Bend BIS Bend Guider BIS Protective Pipe BIS PE Flexible
More informationROV shackles. your reliable partner
ROV shackles your reliable partner Dear Customer, For over 90 years the production of high tensile shackles has been our core business and competence. The designs and quality standards of our wire rope-
More informationMember of Van Beest International
P.O. Box, 0 AB Sliedrecht Industrieweg, HJ Sliedrecht The Netherlands Telephone : + 00 Fax : + E-mail : sales@vanbeest.com Website : www.vanbeest.com Dear Customer, For over 0 years the production of high
More informationWire Rope Slings SLING LEG OPTIONS WIRE ROPE SLINGS
SLING LEG OPTIONS Standard End Fitting Combinations To order sling legs, choose the correct size from the tables on the following pages. Determine the length needed and specify the end fittings required
More informationDIAMOND Retractable Rodding Robot Model SPRAYROD-R
2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic
More informationWire Rope and Cable Fittings
Wire Rope and Cable Fittings 85 Broadcommon Road Bristol, RI 02809 Tel. 401-253-0096 800-323-0492 Fax. 401-253-6487 820 Greenleaf Avenue Elk Grove Village, IL 60007 Tel. 847-437-6663 800-323-1592 Fax.
More informationM_004 Basic Rigging Safety Lecture
M_004 Basic Rigging Safety Lecture Milton J. Shoup III Mechanical Safety Officer University of Rochester Laboratory for Laser Energetics 1 of 101 Summary Safety is everyone s business and compliance with
More informationSAFE HANDLING OF PRECAST CONCRETE PRODUCTS
SAFE HANDLING OF PRECAST CONCRETE PRODUCTS Safety Handling of Precast Concrete Products The lifting of any precast product requires the use of special equipment and substantial planning and knowledge.
More informationInstallation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More information1-800-238-0333 2013 synthetics catalog right product right place right time
000 0 synthetics catalog right product right place right time Disclaimer & copyright The information contained in this catalog is derived from many sources, including numerous thirdparty manufacturers
More information5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationTube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
More informationProduct Information Report Rigging Techniques
Overview Chain Slings, Loading Angles and Choking All chain manufacturers publish working load limits for single-chain slings in straight tension and for multiple-legged slings when used at various angles.
More informationSECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More information4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
More informationREPAIR INSTRUCTIONS UNDER BODY CYLINDER (UM, UL)
Table of contents 1. Introduction... 3 1.1. Scope of use... 3 1.2. General remarks... 3 1.3. Contact Hyva... 3 1.4. Precautions... 4 1.5. Spare parts... 4 1.5.1. Prior to use... 4 1.6. Recycling and Reuse
More informationFormwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co.
Tie Rod & Formwork s well as containing our comprehensive range of Formwork Tie Sytems; this section also covers our market leading Rapidobat Column Former. Exclusive also to Formwork Direct are innovations
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationRating when used as a weight carrying hitch without spring bars:
BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.
More informationlindab duct suspension & support system Duct suspensions & Support systems
lindab duct suspension & support Duct suspensions & Support s lindab duct suspension & support Content Duct suspensions & Support s Duct suspension Duct suspension FB... DRSN... 0 DRSNR... 0 Channels and
More information13. STABILISATORER - STABILIZERS
Modeller og egenskaper Models and features Kran / Crane Teknisk Informasjon Technical Information T / m Type Bygget av den Italienske produsenten Built by Italian manufacturer ICM ICM ICM stabilizers are
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationClick. Campbell Chain. on the section you want
Campbell Chain Founded in 99, Campbell is the largest manufacturer of welded and weldless chain in the United States. Users of Campbell chain can select from a wide range of working load capacities including
More informationENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
More informationUNIVERSAL RAILING, STEEL
RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL
More informationCarton - Straight Link Machine Chain (Order Unit is Feet )
Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),
More informationEEC 94/20/EC APPROVED KINGPINS
EEC 94/20/EC APPROVED KINGPINS All Capus EEC approved Kingpin Assemblies have been tested in Germany by RWTuV. The tests include a simulated life test - 2 million cycles at the approved 'D' value loadings.
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More information3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
More informationVCE VET ENGINEERING STUDIES
Victorian Certificate of Education 2013 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET ENGINEERING STUDIES Written examination Section Wednesday 20 November 2013
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationDirective 2006/42/EC Classification of equipment used for lifting loads with lifting machinery
1(7) Classification of equipment used for lifting loads with lifting machinery December 2009 This classification was approved by the Machinery ing Group as a basis for a consistent application of the term
More information6720616592.00-1.SD. Flat roof. Rack Mounting. Installation instructions 6 720 647 036 (2010/11) AU
6720616592.00-1.SD Flat roof Rack Mounting AU Installation instructions 2 Contents AU Contents 1 Key to symbols and safety instructions....... 3 1.1 Explanation of symbols................ 3 1.2 Safety
More informationTECHNICAL SPECIFICATION
THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,
More informationWOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear
1 Schedule drawing 1.1 Schedule drawing, WOLFF 6023.6clear [X] max. hook height above ground Data WOLFF 6023.6clear Item Crane type Design Type of setup Basis of calculation Payload torque Hoist winch
More informationI BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
More informationUGVCL/SP/591/11KV HT AB CABLE
TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED) 1. SCOPE This specification covers requirements of XLPE insulated, 11 KV Aerial Bunched
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationTECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before
More informationOwner s Manual Gantry Cranes
Owner s Manual Gantry Cranes Fixed Height Gantry Crane MODEL NUMBER: SERIAL NUMBER: CAPACITY IN TONS: Telescoping Gantry Crane Bushman AvonTec 262-790-4200, 800338-7810, Fax 262-790-4200 www.bushmanavontec.com
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationGeneral Injection Mould Specifications KONGSBERG AUTOMOTIVE GROUP
KONGSBERG AUTOMOTIVE GROUP Edition 3 19.06.2013 A: GENERAL STATEMENT B: STEEL/COLUMN/STANDARD ELEMENTS STEEL COLUMN STANDARD ELEMENTS C: TECHNICAL CHARACTERISTICS I- MOULD BASE GENERAL CONTENT II- MOULD
More informationMACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)
MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer
More informationRoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
More informationM113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS SOUCY TRACK SYSTEM 04-M113-1ENS (SPLIT IDLER) Litho d in Canada 1 04-M113-1ENS
M113 VEHICLE FAMILY RUBBER TRACK INSTALLATION INSTRUCTIONS (SPLIT IDLER) 1 # TABLE OF CONTENTS List of parts and tools................................................3 Installation of complete kit...................................................5
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationThe Campbell operation facilities in York, PA, and Cortland, NY, conform to Quality Standard ISO 9001.
Campbell Chain Slings Table of Contents Founded in, Campbell is the largest manufacturer of welded and weldless chain in the United States. Users of Campbell chain can select from a wide range of working
More informationSSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
More informationNTN bindinger / NTN Bindings. Telemark-bindinger 75mm / Telemark Bindings 75mm
NTN bindinger / NTN Bindings 3 600 22 par/pair NTN m/skistopper, lang, oransje, medium NTN w/ski brake, long, orange, medium 3 600 23 par/pair NTN m/skistopper, lang, oransje, soft NTN w/ski brake, long,
More informationLinkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
More informationWorking Load Limit (lbs.) Wt./Ea. (lbs.) Working Load Limit (lbs.) Wt./Ea. (lbs.) Working Load Limit (lbs.)
STAINLESS STEEL Swivels Eye & Eye Swivels T316 Size Overall Length Limit SWVLEESS1/4 1/4 2.60 660.13 SWVLEESS5/16 5/16 3.54 1,045.24 SWVLEESS3/8 3/8 4.53 1,925.42 SWVLEESS1/2 1/2 5.75 2,750 1.28 SWVLEESS5/8
More informationSection M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
More informationHoist Rings. Sizes and Styles for all your Applications and Requirements. HR-125 The Original. SS-125 Stainless Steel. HR-1000 Heavy Lift
s and Styles for all your Applications and Requirements HR-125 The Origal HR-1000 Heavy Lift SS-125 Staless Steel HR-100 Pivot HR-125C Grade 8 Cha HR-125W Web HR-1200 Side Pull HR-500 Trench Cover English
More informationRINGFEDER. Automatic Hook Couplings for Road and Cross Country Vehicles. TYPE RUwg. Prospect
RINGFEDER E 07 00 Prospect Automatic Hook Couplings for Road and Cross Country Vehicles TYPE RUwg Automatic Hook Couplings Types RUwg K O D, K 1 D, K 2 D, K 3 D, K 4 D for towing eye according to VG 74059
More informationMultiPost-AP anchorage device
MultiPost-AP anchorage device MultiPost anchorage point Type 1 Fixing on reinforced concrete with large, 360 rotating stainless steel lifting eye for the simultaneous securing of max. 2 persons. This can
More informationTS 813 GROUNDING AND BONDING TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET GROUNDING
TORONTO TRANSPORTATION January 2012 TS 813 GROUNDING AND BONDING TABLE OF CONTENTS 1. DRAWINGS TTD 813.001 TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD 813.005 CONTROLLER CABINET
More informationKELGATE BRAKES - price list for 2014 Page 1
KELGATE BRAKES - price list for 2014 Page 1 Description GBP (Kgms) Disc's:- FV = Fully Vented RV = Radially Vented New systems are supplied dry. 02-9028 Charge for bleeding per caliper 18.00 00-8080 GTK'
More informationTBi Industries. MIG / MAG Welding torches TBi Expert 0. 1
TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240
More informationDRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4
DRUM ROLLER Suitable for drums up to 200 liter capacity Made from fire-galvanized sheet steel ø 610 mm, with 4 polyamide swiveling castors ø 75 mm Model FAR-1: closed version with welded leak-proof base,
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More informationNy postlov i Norge New postal regulations in Norway. Frode Wold, Norway Post Nordic Address Forum, Iceland 5-6. may 2015
Frode Wold, Norway Post Nordic Address Forum, Iceland 5-6. may 2015 < Norge skal innordne seg EU s postdirektiv og dette vil få konsekvenser for Posten Norge mht postnummeradministrasjon, postadresser
More informationDuring severe flood events, such as those
Recommended Practice for Home Heating Oil Tank Flood Resistance During severe flood events, such as those occurring from Hurricane Irene and Super- Storm Sandy, many coastal and low elevation inland areas
More informationIndustrial Guideline nr. 2
Industrial Guideline nr. 2 OFFSHORE CONTAINERS Purpose Provide guidance for the safe use of offshore containers in the Dutch mining industry taking in account Dutch legislation and European standards.
More informationWIRE ROPE LIFTING SLINGS. Suitable for lifting heavier weights with round shapes
05 WIRE ROPE LIFTING SLINGS Suitable for lifting heavier weights with round shapes Wire rope lifting slings have to be used only for weights which allows safe fastening according to weight shape and firmness
More informationHBM 140 10320-INT. GB DE FR DK SE NL NO FI (Original: DK) Made by
Usermanual HBM 140 10320-INT GB DE FR DK SE NL NO FI (Original: DK) Made by Complete 14 20 7 26 21 5 11 6 16 1 62 4x 26 4x 21 37x 5 35x 11 1 30 46 2 74 1 7 27 1 75 11 5 21 56 45 47 46 4 1 26 10 3 61 12
More informationTigrip Load Hoisting Tackle. Grabs & Clamps. Plate clamp with safety lock model TBL. Capacity 500-3000 kg. Technical data model TBL
Plate clamp with safety lock model TBL 500-3000 This clamp is primarily used for transporting single steel plates in the vertical position, as well as lifting and turning through 180. This clamp can also
More informationCables. Accessories. For Force, Torque and Strain Sensors
Accessories Cables For Force, Torque and Strain Sensors Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater
More information1x90 TONS TENSIONERS TECHNICAL PROPOSAL. 1 X 90 Tons 30 m/min Tensioners TECHNICAL PROPOSAL JOB 08/059. 0 19/02/2008 Basic proposal PP GM SB
Pagina N.: 1 of 19 1 X 90 Tons 30 m/min Tensioners JOB 08/059 0 19/02/2008 Basic proposal PP GM SB Rev N Date Issue Description Prepared by Checked by Approved by Pagina N.: 2 of 19 TABLE OF CONTENTS:
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationBAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
More informationMONDOATHENS BASKETBALL SET (Reference PK110)
MONDOATHENS BASKETBALL SET (Reference PK110) DESCRIPTION The MONDOATHENS backstop unit is mainly designed for multi-sports pavilions and installations where the highest-level basketball competitions are
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
More informationSeries 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
More informationONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationOutdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationM & S Sikkerheds - og Overtryksventiler/ M & S Safety - and Relief Valves
M & S Sikkerheds - og Overtryksventiler/ M & S Safety - and Relief Valves - Side 1. Issue AB:06-2012 255 HyCom Fjedersikkerhedsventil / HyCom-Safety Valve Spring Loaded - Manuel / Manual - For gasarter,
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationEdge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01
PARTS LIST KENT model: 908 4703 010 Simple. Clean. 2007-01 2 2007-01 TABLE OF CONTENTS 1 DESCRIPTION PLAN GENERAL VIEW 2-3 CHASSIS SYSTEM 4-5 SIDE BROOM ASSEMBLY 6-7 HOPPER SYSTEM 8-9 TRANSMISSION SYSTEM
More informationPRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE. By H P Gupta & D K Gupta
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE By H P Gupta & D K Gupta DIFFERENT TYPES OF DAMAGES 1.Minor cracks 0.5 to 5 mm wide in load or non-load bearing walls 2.Major
More informationPLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
More information