TARIFF CODE and updates standard

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "TARIFF CODE and updates standard"

Transcription

1 TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of carbon: Other Billets, Blooms MS 1494 Beam Blanks Other Blooms MS 1495 Containing by weight 0.25% or more of carbon Containing by weight 0.6% or more Beam Blanks. MS of carbon Other No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS 7208 Flat rolled products of iron or non alloy steel, of a width of 600mm or more, hot rolled, not clad, plated or coated In coils, not further worked than Steel Strip and MS 1705:2003 hot rolled, with patterns in relief Sheet Of a thickness of 4.75mm or more Of a thickness of 3mm or more but Pipes & Tubes MS 1768:2004 less than 4.75mm Of a thickness of less than 3mm Of a thickness exceeding 10mm Of a thickness of 4.75mm or more

2 but not exceeding 10mm Of a thickness of 3mm or more but less than 4.75mm. Of a thickness of les than 3mm Containing by weight 0.6% or more Mild Steel Strip MS 1705:2003 of carbon and Sheet JIS G Other No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS Not in coils, not further worked than Pipes & Tubes MS 1768:2004 hot rolled, with patterns in relief JIS G Of a thickness exceeding 10mm Of a thickness of 4.65mm or more Steel Strip and but not exceeding 10mm. Sheet MS 1705: Of a thickness of 3mm or more but Plates, Wide Flats, MS 1721 less than 4.75mm. and Wide Strips Strutural steel MS EN 10025:2009 Structural Steel ASTM A131

3 for Ships ASTM A283 ASTM A285

4 High strength ASTM A242 Low Alloy Structural Steels. Carbon Structural ASTM A 36 Steel Strip and Pressure Vessel ASTM A 515 Plate, Carbon Steel Pressure Vessel ASTM A 516 Plate, Carbon Steel Structural Steel ASTM A 572 Seamless Pipe API 5L Rolled Steels for JIS G 3101 general structure Rolled Steels for JIS G 3106 Welded Structure

5 Steel Plates, JIS G 3113 Sheets and Strip. Steel Sheets, Plates JIS G 3116 and Strip for Gas Cylinders Corrosion Resisting JIS G 3125 Rolled Steel Hot Rolled High Strength Steel JIS G 3134 Sheets and Strip. Of thickness of less than 3 mm: Containing by weight 0.6% or more of Mild Steel Plates, MS 1705:2003 carbon Sheet & Strip. JIS G Other Plates, Wide Flats, MS 1721 and Wide Strips Carbon Structural ASTM A36 Steel

6 Rolled Steel for JIS G3101 General structure JIS G3106 Pipes & Tubes MS 1768:2004 JIS G 3132 Structural Steel MS EN 10025:2009 Seamless Pipe API 5L

7 Steel Plates, Sheets JIS G 3113 and Strips. Steel Sheets, Plates JIS G 3116 Corrosion Resisting JIS G 3125 Rolled Steel Hot rolled High strength JIS G 3134 Steel Sheets. Structural Steel for ASTM A131 Ships ASTM A242 ASTM A283 ASTM A285 Carbon Structural ASTM A 36 Steel Pressure Vessel ASTM A515 Plate, Carbon Steel ASTM A516 Structural Steel.

8 Structural Steel. MS EN 10025:2009

9 7209 Flat rolled products of iron or non alloy steel, of a width of 600mm or more, cold rolled (cold reduced), not clad, plated or coated. In coils, not further worked than cold rolled (cold reduced): Of a thickness of 3 mm or more Steel Sheet MS ISO 3574 :2009 (P) Of a thickness exceeding 1 mm but less MS ISO 4997 than 3 mm :2009 (P) Of a thickness of 0.5 mm or more but MS ISO not exceeding 1 mm :2009 (P) Of a thickness of less than 0.5 mm: Other MS ISO :2009 (P)

10 Not in coils, not further worked than cold rolled (cold reduced): Of a thickness of 3 mm or more MS ISO Of a thickness exceeding 1 mm but :2009 (P) less than 3 mm Of a thickness of 0.5 mm or more but not exceeding 1 mm Of a thickness of less than 0.5 mm: Other

11 7210 Flat rolled products of iron or non alloy steel, of a width of 600mm or more, clad, plated or coated. Plated or Coated with tin: Electrolytically plated or coated with zinc mm or less in thickness Steel Sheet MS ISO 5002: More than 1.5mm but less than 3mm in thickness

12 Corrugated: mm in or less in thickness Hot Dip Zinc Coated MS Sheet and Coil mm or less in thickness Other Plated or Coated with aluminium zinc alloys: Corrugated: mm or less in thickness Hot Dip Zinc Coated More than 1.5mm in thickness Sheet and Coil mm or less in thickness More than 1.5mm in thickness MS 1196:2004

13 mm or less in thickness Hot Dip Zinc Coated JIS G More than 1.5mm in thickness steel Sheet and Coil. Aluminium zinc JIS G 3322 Alloy coated Steel Sheet In Coil.

14 7211 Flat rolled products of iron or non alloy steel, of a width of less than 600mm, not clad, plated or coated. MS Universal plate. Steel Strip and Sheet 1705: Exceeding 150mm but not exceeding Pipes & Tubes 400mm in width Other Universal plates Not exceeding 25mm in width Exceeding 25mm, but not exceeding 400mm in width Other MS 1768:2004

15 Coils for re rolling SAE J 403: Other Steel Strip and Sheet MS 1705:2003

16 Not exceeding 25mm in width Pipes & Tubes MS 1768: Exceeding 150mm, but not exceeding 400mm in width Other Coils for re rolling Of a thickness of 0.17 mm or less Other Not exceeding 25mm in width Steel Strip MS ISO Exceeding 25mm, but not exceeding 6932: mm in width Other Of a thickness of 0.17 mm or less Other

17 Not exceeding 25mm in width Steel Strip MS ISO Exceeding 25mm, but not exceeding 4960: mm in width Other Of a thickness of 0.17 mm or less Other Not exceeding 25mm in width Exceeding 25mm, but not exceeding 400mm in width Other Other

18 7212 Flat rolled products of iron or non alloy steel, of a width of less than 600mm, not clad, plated or coated Not exceeding 25mm in width Steel Sheet Ms ISO Exceeding 25mm, but not exceeding 5002: mm in width Other mm or less in thickness Other Not exceeding 25mm in width Hot Dip Zinc Coated MS Exceeding 25mm, but not exceeding Sheet In Coil 400mm in width Other mm or less in thickness Other

19 Not exceeding 25mm in width Hot Dip Zinc Coated JIS G Exceeding 25mm, but not exceeding Steel Sheets and 400mm in width Coils Other mm or less in thickness. Aluminium zinc JIS G More than 1.5mm in thickness. alloy coated steel sheet and coil Not exceeding 25mm in width Hot Dip Zinc Coated MS Exceeding 25mm, but not exceeding Steel Sheets and : mm in width Coils Other mm or less in thickness More than 1.5mm in thickness.

20 Containing indentations, ribs, grooves Hot Rolled Steel MS 146:2006 or other deformations produces during Reinforcement Bar the rolling process Other, of free cutting steel. Free Cutting Steel MS Of circular cross section measuring Steel Wire Rod. MS ISO less than 14mm in diameter : Part 1 & Other MS ISO 16120: Part 3 MS ISO 16120: Part 4

21 7214 Other bar and rods of iron or non alloy steel, not further worked than forged, hot rolled, hot drawn or hot extruded, but including those twisted after rolling. MS Round Carbon steel for 2247:2009 structural machine use Round Hot Rolled Steel MS 146:2006 Reinforcement bar

22 Other Carbon steel for MS 2247:2009 structural machine use Round Carbon steel for MS 2246:2009 structural machine use Round Hot Rolled Steel MS 146:2006 Reinforcement bar Round Free Cutting Steel MS 1495

23 Round Carbon steel for MS 2247:2009 structural machine use Round Structural Steel. MS EN 10025:2009 MS 2247:2009

24 Round Free Cutting Steel MS Round PC Strand MS 1138: part 1 4: Round Round

25 7216 Angles, Shape and sections of iron or non alloy steel Of a thickness of 5mm or less Structural Steel & MS Other Sheet Pile. MS Other Other Other Of a thickness of 5mm or less Other

26 Of a thickness of 5mm or less Structural Steel & MS Other Sheet Pile. MS Containing by weight 0.6% or more carbon Thickness of web of 9mm and above Other L Section Of a thickness of 5mm or less Other, T section Of a height of 80mm or more Of a height of less than 80mm Of a thickness of 5mm or less Other Of a thickness of 5mm or less Other

27 Of a height of 80mm or more. Structural Steel & MS 2259: Of a height of less than 80mm H Pile Of a thickness of 5mm or less Structural Steel & MS Other, shapes and sections. H Pile MS Of a thickness of 5mm or less Structural Steel & Other, shapes and sections. H Pile MS 2259:2009

28 7217 Wire of iron and non alloy steel Not plated or coated, whether or MS not polished MS Plated or coated with zinc MS MS MS Plated or coated with other base MS ISO material 16650: Other Steel Wire & Fabric ASTM A 933

29 7222 Other bars and rods of stainless steel: angles, shapes and section of stainless steel Round MS Round 7228 Other bars and rods of alloy steel: angles, shapes and section of alloy steel; hollow drill bars and rods, of alloy or non alloy steel Of a height of 80mm or more Of a thickness of 5mm or less Of a thickness of 5mm or less Structural Steel & MS 1490 H Pile MS 1491

30 7229 Wire of other alloy steel Other PC Strand MS 1138: part 1 4: Sheet piling of iron and steel, whether or not drilled, punched or made from assembled elements, welded angles, shapes and sections, of iron steel or steel Rails Sheet Pile MS MS Angles, Shapes and sections. Structural Steel & MS 1490 H Pile MS 1491

31 Railway or tramway track construction material of iron or 7302 steel Rails Steel Rails BS Sleepers (cross ties) AS & 2 Light Rail JIS E 1103 Crane Rail DIN 536

32 7303 Tubes, Pipes and hollow profiles of cast iron Tubes, pipes and hollow profiles Ductile iron pipes, BS EN of cast iron. fittings, accessories. 545:2006 BS EN 598: Tubes, Pipes and hollow profiles, seamless of iron (other than cast iron) or steel Of stainless steel. Boiler, Super heater, ASTM/SA 213 & heat exchanger tubes Condenser tube ASTM A249 Stainless steel pipe ASTM 312 ASTM A358 ASTM A376 ASTM A409 ASTM A813

33 Other Steel Pipe ASTM A53 Seamless Pipe API 5L Carbon Steel Pipe ASTM A106 Steel Pipe ASTM A333 Carbon Steel Pipe ASTM A106 Steel Boiler & ASTM A210 Super heater Tubes

34 Drill pipe of stainless steel Boiler, Super heater, ASTM/SA 213 & Heat exchanger Other drill pipe Tubes Other of stainless steel Condenser Tubes ASTM A Other Stainless Steel Pipes ASTM High pressure hydro electric conduits ASTM A Other ASTM A High pressure hydro electric conduits ASTM A Other ASTM A813

35 High pressure hydro electric conduits Boiler, Super heater, ASTM/SA 213 & Heat exchanger Tubes Other Condenser Tubes ASTM A High pressure hydro electric conduits Stainless Steel Pipes ASTM Other ASTM A High pressure hydro electric conduits ASTM A Other ASTM A High pressure hydro electric conduits ASTM A Other High pressure hydro electric conduits

36 7305 Other tubes and pipes (e.g. welded, riveted or similarly closed) having circular cross sections, the external diameter of which exceeds 406.4mm of iron and steel Longitudinally submerged arc Tubes and Pipes MS ISO 3183 welded Other, longitudinally welded Other Casing of a kind used in drilling for oil Casing tubes API 5CT and gas Longitudinally welded Boiler, Super heater & ASTM/SA 213 Heat exchanger tubes Stainless Steel Pipes ASTM 312 ASTM A376 ASTM A333 ASTM A53 ASTM A135

37 Other Non alloy steel tube MS 1968:2007 and fittings Other Non alloy steel tube MS 1968 and fittings MS 1862

38 7306 Other tubes, hollow profile and pipes (e.g. open seam or welded, riveted or similarly closed) of iron or steel Welded of stainless steel. Seamless Pipe API 5L Other Boiler, Super heater & ASTM/SA 213 Heat exchanger tubes Stainless Steel Pipes ASTM 312 ASTM A376 ASTM A333 ASTM A53 ASTM A Welded of stainless steel. Stainless Steel Pipes MS 1841

39 Other, welded of circular cross section Carbon Steel Tubes. MS of iron or non alloy steel Welded Steel Pipes MS 1968 MS 863: Other, welded of circular cross section Stainless Steel Pipes ASTM of iron or non alloy steel JIS G3459 SUS 304 SUS 316 SUS 317 SUS 321

40 Other, welded of circular cross section Carbon Steel Tubes. MS of other alloy steel Of square or rectangular cross section Of other non circular cross section Other Non alloy steel & MS Tubes & fittings MS 863:2004 MS Structures (bridges, towers, doors, windows, scaffolding) Other Tube for scaffolding MS

41 7312 Stranded wire ropes, cables, plaited, bands, slings and the like of iron steel not electrically insulated Stranded wire ropes and cables Wire ropes & wire MS ISO Strand, Wire cable. MS MS MS ISO Other Single wire for wire BS EN Strand, Wire cable. BS EN BS EN Cloth (including endless bands) grill, netting and fencing expended metal of iron steel Grill, netting and fencing, welded at Steel fabric, mesh for MS 145 the intersection, of wire with a fencing maximum cross sectional dimension of 3mm or more and having a mesh size of size 100cm2 or more Expended metal Steel Grating BS 405

42 7325 Other cast articles of iron and steel Manhole covers, gratings and frames Manhole Tops & gully BS EN thereof 124:

Chapter 73 Articles of iron or steel

Chapter 73 Articles of iron or steel Notes. Chapter 73 Articles of iron or steel 1.- In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and

More information

DATASHEET FOR EXPORTERS

DATASHEET FOR EXPORTERS DATASHEET FOR EXPORTERS IMPORT VERIFICATION PROGRAMME FOR INDONESIA IRON & STEEL Page 1 / 11 TABLE OF CONTENTS 1. Import Verification Programme (IVP) mandate... 3 2. Inspection Order... 3 3. Inspection

More information

Chapter 73. Articles of iron and steel

Chapter 73. Articles of iron and steel 242 - Bangladesh Customs Tariff Notes. Chapter 73 Articles of iron and steel 1. In this Chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over

More information

CHAPTER 73 ARTICLES OF IRON OR STEEL. 1.-In this Chapter the expression " cast iron " applies to products obtained by casting in which iron

CHAPTER 73 ARTICLES OF IRON OR STEEL. 1.-In this Chapter the expression  cast iron  applies to products obtained by casting in which iron Notes. CHAPTER 73 ARTICLES OF IRON OR STEEL 1.-In this Chapter the expression " cast iron " applies to products obtained by casting in which iron predominates by weight over each of the other elements

More information

Quantity Full Pref. Duty (1) (2) (3) (4) (5) (6) (7)

Quantity Full Pref. Duty (1) (2) (3) (4) (5) (6) (7) Chapter 73 Articles of iron or steel Notes. 1. In this Chapter the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and

More information

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) Spectifications ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) ANSI / ASME B1.20.1 ASME B16.10 ASME B16.11 ASME B16.25 ANSI / ASME B16.28 ANSI / ASME B16.34

More information

American Society of Mechanical Engineers

American Society of Mechanical Engineers American Society of Mechanical Engineers ASTM A53 /ASME SA53 Pipe Steel Black and Hot Dipped Zinc Coated Welded and Seamless ASTM A105/ASME SA105 Forgings, Carbon Steel, for Piping Components ASTM A106/ASME

More information

CHAPTER 73. Articles of iron or steel

CHAPTER 73. Articles of iron or steel NOTES : CHAPTER 73 Articles of iron or steel 1. In this Chapter, the expression cast iron applies to products obtained by casting in which iron predominates by weight over each of the other elements and

More information

INDIAN STANDARDS (BIS) ON WELDING

INDIAN STANDARDS (BIS) ON WELDING ** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding

More information

Discussion on Products under the Scope of EN 1090-1 and proposed CEN/TR to clarify the scope

Discussion on Products under the Scope of EN 1090-1 and proposed CEN/TR to clarify the scope CEN/TC 135 N 686 European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung CEN/TC 135 Execution of steel structures and aluminium structures N 686 Secretariat:

More information

Mission Statement. State Steel strives to provide quality products and services at competitive

Mission Statement. State Steel strives to provide quality products and services at competitive Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories

More information

PRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM

PRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com

More information

Scope of EN 1090-1 Clarification Document

Scope of EN 1090-1 Clarification Document Scope of EN 1090-1 Clarification Document This document has been submitted to the European Commission as the UK view on the scope of EN 1090-1. After discussions, including with the European Technical

More information

SECTION 710 GUARDRAIL MATERIALS

SECTION 710 GUARDRAIL MATERIALS 710.08 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 SECTION 710 GUARDRAIL MATERIALS 710.01 General. Metal beam

More information

1.3.3 When pipe is required for close coiling, this should b specified on the order.

1.3.3 When pipe is required for close coiling, this should b specified on the order. SA 36* SA 53* Covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded contrsuction of bidges and buildings, and for general structural purposes. When the

More information

CUSTOMS TARIFF - SCHEDULE XV - 1

CUSTOMS TARIFF - SCHEDULE XV - 1 XV - 1 Section XV BASE METALS AND ARTICLES OF BASE METAL Notes. 1. This Section does not cover: (a) Prepared paints, inks or other products with a basis of metallic flakes or powder (headings 32.07 to

More information

Cut & Bent Bar Reinforcement Mesh Fabric Stockholders Reinforcement Accessories Express Valued Service Quality & Reliability

Cut & Bent Bar Reinforcement Mesh Fabric Stockholders Reinforcement Accessories Express Valued Service Quality & Reliability Your Local Independent Supplier Serving the Construction Industry Cut & Bent Bar Reinforcement Mesh Fabric Stockholders Reinforcement Accessories Express Valued Service Quality & Reliability 911001 LIVERSEDGE

More information

Pipe Pile. (800) 848-6249

Pipe Pile. (800) 848-6249 Pipe Pile Similar to H-Piles, Pipe Piles are also designed to transfer structural loads through the foundation to soils below. Where H-Piles are typically classified as point bearing, Pipe Piles are most

More information

Mechanical arms, belts and sheets

Mechanical arms, belts and sheets Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black

More information

SECTION 32 31 13 CHAIN LINK FENCES AND GATES

SECTION 32 31 13 CHAIN LINK FENCES AND GATES SECTION 32 31 13 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Fence framework, fabric, and accessories. 2. Excavation for post bases. 3. Concrete foundation for posts

More information

- STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS -

- STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS - - STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS - PART 1.01: MATERIALS STEEL: All steel material for the fence and gate system shall conform to the requirements of ASTM A- 787 and ASTM A653

More information

JIS G3444 Carbon steel tubes for general structural purposes

JIS G3444 Carbon steel tubes for general structural purposes JIS G3444 Carbon steel tubes for general structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes (hereafter referred to as "tubes") used for civil engineering, architecture,

More information

The City of Winnipeg Section Turtle Island Community Centre Renovation Page 1 of 5

The City of Winnipeg Section Turtle Island Community Centre Renovation Page 1 of 5 Turtle Island Community Centre Renovation Page 1 of 5 Part 1 General 1.1 SECTION INCLUDES.1 Shop fabricated ferrous metal items..2 Shop fabricated aluminum items..3 Steel pipe handrails balusters, and

More information

TESTING LABORATORY ROURKELA

TESTING LABORATORY ROURKELA TESTING LABORATORY ROURKELA 1. Background: Keeping in view of the growing demand of quality of the products of the industries, Govt. has established Testing Laboratory, Rourkela, under the Directorate

More information

Rolling - Introductory concepts

Rolling - Introductory concepts Rolling - Introductory concepts R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Joint Initiative of IITs and IISc Funded by MHRD Page 1 of 8 Table of Contents 1. Rolling -

More information

Progressive, modern, innovative that s what Brunswick Steel is all about.

Progressive, modern, innovative that s what Brunswick Steel is all about. REFERENCE CATALOGUE Progressive, modern, innovative that s what Brunswick Steel is all about. Established in 1970 as a family owned business, Brunswick Steel initially began as a demolition and salvage

More information

QUINTA SECCION SECRETARIA DE RELACIONES EXTERIORES

QUINTA SECCION SECRETARIA DE RELACIONES EXTERIORES Lunes 26 de junio de 2000 DIARIO OFICIAL (Quinta Sección) 1 (Viene de la Cuarta Sección) QUINTA SECCION SECRETARIA DE RELACIONES EXTERIORES 72 13 Bars and rods, hot-rolled, in irregularly wound coils,

More information

Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth

Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing

More information

HOME OFFICE SPECIFICATION FOR SEAMLESS ALLOY STEEL CYLINDERS FOR THE CONVEYANCE OF COMPRESSED GASES HOT

HOME OFFICE SPECIFICATION FOR SEAMLESS ALLOY STEEL CYLINDERS FOR THE CONVEYANCE OF COMPRESSED GASES HOT HOME OFFICE SPECIFICATION FOR SEAMLESS ALLOY STEEL CYLINDERS FOR THE CONVEYANCE OF COMPRESSED GASES HOT 1 Cylinders manufactured to these specifications shall be manufactured by a cylinder manufacturer

More information

Industrial type flooring and stair treads

Industrial type flooring and stair treads BRITISH STANDARD Industrial type flooring and stair treads Part 1: Metal open bar gratings Specification ICS 91.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Publishing

More information

BS EN 10025: 1-6: 2004 (Current) BS 4360: 1986 (Superseded, Withdrawn) Specification for weldable structural steels

BS EN 10025: 1-6: 2004 (Current) BS 4360: 1986 (Superseded, Withdrawn) Specification for weldable structural steels Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN/other Title

More information

SECTION CHAIN LINK FENCE AND GATES

SECTION CHAIN LINK FENCE AND GATES SECTION 02830 CHAIN LINK FENCE AND GATES PART 1 GENERAL 1.01 SCOPE OF WORK The work covered in this section shall include all materials, labor, and equipment necessary for a complete installation of the

More information

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12 September 2013 Page 1 of 12 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work shall consist of the supply and construction of a chain link fence, barb wire fences or mesh fences as shown on the Plans or

More information

LIST OF PRODUCTS UNDER MANDATORY CERTIFICATION. 4 IS 1489 (Part 1) Portland Pozzolana Cement-Part1 Fly-ash based

LIST OF PRODUCTS UNDER MANDATORY CERTIFICATION. 4 IS 1489 (Part 1) Portland Pozzolana Cement-Part1 Fly-ash based LIST OF PRODUCTS UNDER MANDATORY CERTIFICATION No. IS No. Product Cement 1 IS 12269 Ordinary Portland Cement, 53 Grade 2 IS 12330 Sulphate Resisting Portland Cement 3 IS 12600 Low heat Portland Cement

More information

SECTION 02824 EXPANDED METAL MESH FENCE

SECTION 02824 EXPANDED METAL MESH FENCE SECTION 02824 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for expanded metal mesh fence on the right-of-way. 1.02 REFERENCE STANDARDS A. ASTM International (ASTM): 1.03 SUBMITTALS

More information

Anodes and Misc Equipment

Anodes and Misc Equipment Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,

More information

SeAH Steel Corporation

SeAH Steel Corporation SeAH Steel Corporation SeAH Steel Corporation SeAH Steel has been at the forefront of innovation for nearly 50 years, continually employing the latest technologies to create high-quality products. This

More information

Welded Fabric. The CARES Guide to Reinforcing Steels Part 5. Installation of welded fabric on a major contract. 1.0 Introduction

Welded Fabric. The CARES Guide to Reinforcing Steels Part 5. Installation of welded fabric on a major contract. 1.0 Introduction Welded Fabric 1.0 Introduction Welded fabric, often referred to as mesh, is a machine welded grid arrangement of reinforcing bars or wires. It is covered by British Standard BS4483. This was revised in

More information

AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels

AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043

More information

SECTION METAL STAIRS, LADDERS, AND WALKWAYS

SECTION METAL STAIRS, LADDERS, AND WALKWAYS SECTION 05510 METAL STAIRS, LADDERS, AND WALKWAYS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: Technical requirements for metal stairs, ladder, and walkways. 1.2 REFERENCES A. General: References to

More information

MARTENSITIC STAINLESS STEEL RWL-34

MARTENSITIC STAINLESS STEEL RWL-34 MARTENSITIC STAINLESS STEEL RWL-34 RWL 34 is a Rapid Solidified Powder (RSP) Martensitic Stainless Steel, which is variation of the 420 martensitic stainless steel family with minimum 13 percent chromium

More information

+91-8048077645 Korus Alloys http://www.famoustubes.co.in/ We are one of the trusted trader and supplier of a quality range of Surgical Tube, Coil, Pipe, Flange, Fitting and Allied Product. These products

More information

SECTION-XV 625 CHAPTER-73. Tariff Item Description of goods Unit Rate of duty Standard Preferential

SECTION-XV 625 CHAPTER-73. Tariff Item Description of goods Unit Rate of duty Standard Preferential SECTION-XV 625 CHAPTER-73 CHAPTER 73 Articles of iron or steel NOTES : 1. In this Chapter, the expression cast iron applies to products obtained by casting in which iron predominates by weight over each

More information

Alternative Steel Materials to BS 5950

Alternative Steel Materials to BS 5950 BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road

More information

+91-8079449636 Girnar Stainless http://www.girnarstainless.com/ We are one of the topmost manufacturers and suppliers of high quality Metal Products. Owing to their high tensile strength, robust design,

More information

Reliable Metal Bending

Reliable Metal Bending Reliable Metal Bending Since 1984 Welcome to Bendpro CNC Mandrel Bending Our commitment to you... P3 Accuracy Guaranteed Quick response quotes F.I.S. freight inclusive pricing Short lead-times 25+ years

More information

SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement

SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement PART 1 GENERAL SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement 1.1 SUMMARY A. Section Includes 1. Supply and install all materials and accoutrements required for the installation

More information

blocks guide brackets, thrust iron Grade nut, stem coupling Stem (spindle), Gate, frame Structural IS:2032

blocks guide brackets, thrust iron Grade nut, stem coupling Stem (spindle), Gate, frame Structural IS:2032 CHAPTER 26-SUPPLY AND ERECTION OF GATES Notes- 1. The rates include all lead and lift and cost of all materials and labour, for all Items. 2. The gates are classified on the basis of head above sill level

More information

isd dunaferr Product catalogue

isd dunaferr Product catalogue isd dunaferr Product catalogue COLD BENT STEEL SECTIONS (Open and hollow) Cold bent steel sections are produced from slit coils by continuous roller bending, using section-shaped pairs of rolls mounted

More information

Mirage over door heater. Features: Electric and LPHW versions. Compact and Versatile. Suitable for mounting up to 3.0m high from finished floor level.

Mirage over door heater. Features: Electric and LPHW versions. Compact and Versatile. Suitable for mounting up to 3.0m high from finished floor level. Features: Electric and LPHW versions. Compact and Versatile Suitable for mounting up to 3.0m high from finished floor level. Recessed or surface mounted. Energy saving controls option available. Available

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

Suggested Specification for Hot-Dip Galvanizing Revised May 2002

Suggested Specification for Hot-Dip Galvanizing Revised May 2002 Suggested Specification for Hot-Dip Galvanizing Revised May 2002 This suggested specification is provided as a guide to producing a quality document calling for after-fabrication hot-dip galvanizing of

More information

British standards (BS) & codes related to steel construction

British standards (BS) & codes related to steel construction Maryland Metrics Technical Data Chart British standards (BS) & codes related to steel construction Structural steel BS 970 : specification for wrought steels for mechanical and allied engineering purposes

More information

20 TANK CONTAINER STANDARD SPECIFICATION MODEL NUMBER: 24 FSTD 2 QUOTATION NUMBER

20 TANK CONTAINER STANDARD SPECIFICATION MODEL NUMBER: 24 FSTD 2 QUOTATION NUMBER REVISION: R0 DATE: 04/04/00 20 TANK CONTAINER STANDARD SPECIFICATION MODEL NUMBER: 24 FSTD 2 QUOTATION NUMBER PROPOSED BY: PREPARED FOR: TRENCOR TANK CONTAINERS - 1 - OPERATOR/ OWNER: 1. Technical Characteristics

More information

PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January

PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January News Release FOR IMMEDIATE RELEASE February 25, 2015 CONTACT: Lisa Harrison 202.452.7115/ lharrison@steel.org PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January Washington,

More information

AMERICAN SOCIETY OF TESTING MATERIALS (ASTM)

AMERICAN SOCIETY OF TESTING MATERIALS (ASTM) AMERICAN SOCIETY OF TESTING MATERIALS (ASTM) The Volume#1 details the standars for: 1. standards for various types of steel pipes specifying requirements for high-temperature services, ordinary use, and

More information

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE

SECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel

More information

woven wire gabions wrought iron chain zinc coated wire netting wire fencing curved fence panels plastic temporary fence block pvc coated gabion

woven wire gabions wrought iron chain zinc coated wire netting wire fencing curved fence panels plastic temporary fence block pvc coated gabion woven wire gabions wrought iron chain zinc coated wire netting wire fencing curved fence panels plastic temporary fence block pvc coated gabion baskets galvanized zinc wire basket beautiful metal gates

More information

SECTION 02832 CHAIN LINK FENCE AND GATES

SECTION 02832 CHAIN LINK FENCE AND GATES SECTION 02832 CHAIN LINK FENCE AND GATES PART 1 GENERAL 1.01 SECTION INCLUDES A. Fabrication, furnishing and installation of chain link fence, chain link gates, and extension brackets with barbed wire.

More information

HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches)

HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches) HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches) NOTE: Measurements for diameter are to be taken at least 2 inches (a) from the ends of the tubes

More information

Cable Trays Technical Instructions & Specifications

Cable Trays Technical Instructions & Specifications Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased

More information

FRACASSO SCAFFOLDING PS 720

FRACASSO SCAFFOLDING PS 720 FRACASSO SCAFFOLDING PS 720 Characteristics Geometry Strengths PS 720 was designed and constructed in keeping with European regulations EN12810 and EN12811. 150 mm pin obtained by tapering the upright

More information

NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE

NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_01_201211f

More information

Traction Tread Grating - Design Load Table of Contents & Advantages

Traction Tread Grating - Design Load Table of Contents & Advantages - Design Load Table of Contents & Advantages Design Load Tables, aluminum, stainless steel Planks - 7" width... 54 Planks - 10" width... 55 Planks - 12" width... 56 Planks - 10" width, large hole... 57

More information

Flash Butt Welding Machines

Flash Butt Welding Machines Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process

More information

One stop shopping for any metal, cut and ready, fast!

One stop shopping for any metal, cut and ready, fast! ANGLES Data and Specifications 01 Aluminum Angles (Typically Rounded Corners) This is the most versatile of the heat treatable aluminum alloys. This alloy offers a wide range of mechanical properties and

More information

SPECIFICATIONS FOR STEEL PIPE

SPECIFICATIONS FOR STEEL PIPE SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical

More information

General Allowances for Insulation & Cladding

General Allowances for Insulation & Cladding TRADE OF Industrial Insulation PHASE 2 Module 1 Sheet Metal and Insulation Fundamentals UNIT: 4 General Allowances for Insulation & Cladding Produced by In cooperation with subject matter expert: Michael

More information

Copper and Copper Alloy Tube, Pipe and Fittings

Copper and Copper Alloy Tube, Pipe and Fittings Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification

More information

Bolt On Balconies. Bolt on Balconies. 1

Bolt On Balconies. Bolt on Balconies.  1 Bolt on Balconies www.archtechnik.co.uk 1 BOLT ON BALCONY RANGE BY ARCHTECHNIK The bolt on balcony range of balconies by Archtechnik is a modulised balcony system designed to eliminate thermal bridging.

More information

Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits 1

Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits 1 Designation: A 2 96 (Reapproved 200) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits This standard is issued under the

More information

www.klmtechgroup.com TABLE OF CONTENT

www.klmtechgroup.com TABLE OF CONTENT Page : 1 of 10 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENT SCOPE 2 REFERENCES

More information

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2

More information

North American Stainless Long Products

North American Stainless Long Products North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development

More information

ASTM A-48 A-691 ASTM A-500 Tubing ASTM B-75 B626 Only general information is presented here. Please contact ASTM for greater detail.

ASTM A-48 A-691 ASTM A-500 Tubing ASTM B-75 B626 Only general information is presented here. Please contact ASTM for greater detail. ASTM A-48 A-691 ASTM A-500 Tubing ASTM B-75 B626 Only general information is presented here. Please contact ASTM for greater detail. ASTM Number Explanation A-48 This specification covers gray iron castings

More information

Metal Pressfitting Pipe Systems

Metal Pressfitting Pipe Systems VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing

More information

1.02 SYSTEM DESCRIPTION

1.02 SYSTEM DESCRIPTION 1 OF 7 MODULAR MEZZANINES GUIDE SPECIFICATIONS FOR PART 1 - GENERAL 1.01 RELATED WORK A. SECTION 03 30 00: Cast in Place Concrete (and Concrete Finishing) 1. The area where mezzanine is installed shall

More information

Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com

Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com Raw Material Type, Alloy, & Finishes By Manufacturing Method 1. Punch Press Department

More information

JIS G3457 Arc Welded Carbon Steel Pipes

JIS G3457 Arc Welded Carbon Steel Pipes JIS G3457 Arc Welded Carbon Steel Pipes 1. Scope This Japanese Industrial specifies the arc welded carbon steel pipes, hereinafter referred to as the "pipes". used for piping for steam, water, gas, air,

More information

+91-8071683511 Amanat Steels Pvt. Ltd http://www.amanatsteels.net/ Our company is one of the leading exporters & stockiest of Stainless Steel Pipes, Tubes, Round Bars, Hot Rolled & Cold Rolled Stainless

More information

Pipe and Offshore. Salzgitter Mannesmann International GmbH

Pipe and Offshore. Salzgitter Mannesmann International GmbH Pipe and Offshore Pipe and Offshore Salzgitter Mannesmann International GmbH Salzgitter Mannesmann International GmbH is the globally working export division of the Salzgitter Group, your single source

More information

THE BEST QUALITY STEEL STRUCTURES.

THE BEST QUALITY STEEL STRUCTURES. THE BEST QUALITY STEEL STRUCTURES THE COMPANY INSTAL BIALYSTOK S.A. is one of the largest construction and assembly companies in the North East Poland. It was established in 1974. The company is the part

More information

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-

ASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :- Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and

More information

SPECIFICATIONS FOR STEEL PIPE

SPECIFICATIONS FOR STEEL PIPE SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical

More information

INTER PLANT STANDARD STEEL INDUSTRY

INTER PLANT STANDARD STEEL INDUSTRY INTER PLANT STANDARD STEEL INDUSTRY IPSS SPECIFICATION FOR LIFTING MAGNETS (Third Revision) Corresponding IS does not exist IPSS:1-10-001-11 Formerly : IPSS: 1-10-001-07 0. FOREWORD 0.1 This Inter Plant

More information

FULL YEAR 2014 TOTAL STEEL IMPORTS UP 38% FROM 2013 Finished Steel Import Market Share 30% in December

FULL YEAR 2014 TOTAL STEEL IMPORTS UP 38% FROM 2013 Finished Steel Import Market Share 30% in December News Release FOR IMMEDIATE RELEASE January 27, 2015 CONTACT Lisa Harrison 202.452.7115/ lharrison@steel.org FULL YEAR 2014 TOTAL STEEL IMPORTS UP 38% FROM 2013 Finished Steel Import Market Share 30% in

More information

JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes

JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter

More information

SECTION 15140 - PIPE HANGERS AND SUPPORTS

SECTION 15140 - PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the

More information

AUSTENITIC STAINLESS DAMASCENE STEEL

AUSTENITIC STAINLESS DAMASCENE STEEL AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel

More information

HOT ROLLED BLACK SHEETS

HOT ROLLED BLACK SHEETS PLATES & SHEETS CHATHAM STEEL CORPORATION 2 HOT ROLLED BLACK SHEETS COMMERCIAL QUALITY A-69 Size (In.) Nom. Thickness Weight Per Sheet GA x 48 x 96 (.9) 240.0 (Lbs.) x 48 x 20 00.0 x 48 x 44 60.0 x 48

More information

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04

CALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04 BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and

More information

TEXNIKH 1501-05-07-02-00:2009 HELLENIC TECHNICAL SPECIFICATION. ежглеяис тгс йубеямгсеыс (теувос еутеяо) 33063 2009-12-23 ICS: 93.080.

TEXNIKH 1501-05-07-02-00:2009 HELLENIC TECHNICAL SPECIFICATION. ежглеяис тгс йубеямгсеыс (теувос еутеяо) 33063 2009-12-23 ICS: 93.080. ежглеяис тгс йубеямгсеыс (теувос еутеяо) 33063 2009-12-23 ICS 9308040 1501-05-07-02-002009 TEXNIKH HELLENIC TECHNICAL SPECIFICATION Road lighting columns and fixtures 10 313 111 45 33064 ежглеяис тгс йубеямгсеыс

More information

Carbon and stainless steel pipes/tubes for mechanical engineering and structural applications

Carbon and stainless steel pipes/tubes for mechanical engineering and structural applications Carbon and stainless steel pipes/tubes for mechanical engineering and structural applications ThyssenKrupp Materials Austria ThyssenKrupp Our service for you. The area of materials management is placing

More information

Stainless Steel Tube and Fittings

Stainless Steel Tube and Fittings Stainless Steel Tube and Fittings Stainless Steel 5 Tube and Fittings Photography courtesy of Outokumpu, Arcelor and New Zealand Tube Mills. Stainless steel tube and fittings As-welded (AW) tube Stainless

More information

FLOORS REINFORCEMENT Shear Stud Connector for steel- concrete composite structures cold applied by pins

FLOORS REINFORCEMENT Shear Stud Connector for steel- concrete composite structures cold applied by pins www.tecnaria.com FLOORS REINFORCEMENT Shear Stud Connector for steel concrete composite structures cold applied by pins HIGHPERFORMANCE FLOORS COMPOSITE STEEL AND CONCRETE STRUCTURES: STATIC AND ECONOMIC

More information

WALKWAYS LADDER RUNGS

WALKWAYS LADDER RUNGS BACK FORWARD STEEL PLATES/ LAMINAS/ PLANCHAS SAFETY PRODUCTS STEEL PLATES LAMINAS PLANCHAS ASTM A 36 A 36 ABS CERTIFIED AR 400 AR 500 ASTM 514 ASTM A 515 GR 50/60/70 ASTM A 516 GR 50/60/70 CORTEN OR ASTM

More information

CHAPTER 74. Copper and articles thereof

CHAPTER 74. Copper and articles thereof NOTE : CHAPTER 74 Copper and articles thereof In this Chapter, the following expressions have the meanings hereby assigned to them: (a) Refined copper Metal containing at least 99.85 per cent. by weight

More information

SERIES NG 1800 STRUCTURAL STEELWORK

SERIES NG 1800 STRUCTURAL STEELWORK MANUAL OF CONTRACT DOCUMENTS FOR HIGHWAY WORKS VOLUME 2 NOTES FOR GUIDANCE ON THE SPECIFICATION FOR HIGHWAY WORKS SERIES NG 1800 STRUCTURAL STEELWORK Contents Clause Title Page NG 1800 (08/14) General

More information

INTER PLANT STANDARD - STEEL INDUSTRY

INTER PLANT STANDARD - STEEL INDUSTRY INTER PLANT STANDARD - STEEL INDUSTRY SPECIFICATION FOR PULLING AND LIFTING MACHINES IPSS:1-07-027-14 IPSS Based on IS: 5604-1984 0. FOREWORD 0.1 This Inter Plant standard has been prepared by the Standards

More information

HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company.

HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company. HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company. Based on superb and fair business relationships to long-standing

More information