lindab duct suspension & support system Duct suspensions & Support systems

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "lindab duct suspension & support system Duct suspensions & Support systems"

Transcription

1 lindab duct suspension & support Duct suspensions & Support s

2 lindab duct suspension & support Content Duct suspensions & Support s Duct suspension Duct suspension FB... DRSN... 0 DRSNR... 0 Channels and channel brackets Threaded rod OSB Supported cantilever CL... 0 CLS... 0 Rectangular plain washer SB... Channel RPA... 0 RPC... 0 Hexagonal studding connector Eye bolt OSM... EB... Channel slide nuts Haer head bolt CN... 0 CNS... 0 CNLS... CNSS... HHB... Circular suspension Duct support DH... RK...0 Haer top screw HTS... Duct holder MDH... Channel end cap CEC... Suspension rings UV... UV0... UVH... UVH We reserve the right to make changes without prior notice

3 lindab duct suspension & support Content Duct suspensions & Support s Brackets L-fastener WCL... Fastener bracket Z-fastener MP fastener Toggle Coil wire WCLT... WCZ... WCMP... VIPPB... SPTRAD... Brackets Beam clamp Frame support WCRVG... WCVG... WCZGM... WCLGM... BCT...0 BC...0 Stand... We reserve the right to make changes without prior notice

4 lindab duct suspension & support Duct suspension FB ensions FB Ø, Ø, FB 0 Ø,0 Ø,0 Ø, 0, FB 0 Ø, Ø, Ø, 0 0, Description Suspension band Suspension bands are designed to suspend air ducts. It is easy to cut and bend and allows a quick and economical method of assembly. The perforated suspension steel band is made of steel with assorted holes, which, according to the type selected, allow fixing of threaded rods, threaded clamps, bolts, etc. The small holes can be used with rivets, screws or nails. Type Width m Material FB 0, galvanized FB 0, galvanized FB 0 0 0, galvanized FB 0 0, galvanized FB 0 0, galvanized FB 0, galvanized FB 0 0 0, stainless FB 0 0,0 stainless FB 0 FB 0 FB 0 FB 0 Ø,0 Ø, Ø, Ø,0 Ø, Ø, Ø, Ø, Ø, Ø, 0 0, 0,, 0, 0,0 Width FB0 0, We reserve the right to make changes without prior notice

5 lindab duct suspension & support Duct suspension FB Technical data Max load for different fire classes (Kg) R R 00 C 0 min Type class. FB0 0, 0 FB0 0, 0 FB0, FB0 0, 0 FB0 0, 0 FB0, 0 0 We reserve the right to make changes without prior notice

6 lindab duct suspension & support Threaded rod OSB 0 ensions 0 0 Thread axis Description The threaded rod is according to the standard DIN -. That means that the thread angle is 0. Property class:. Surface finish: Electro zinc plated Max load for different fire classes (Kg) No fire classification Fire classification Tensile strength Yield strength ension Type At safety factor Recoended max load at safety factor Recoended max load at fire classified installations [] [kn] [kn] [kn] [kn] M 00 0,,,0 M 000 0,,,0 M 00 0,,,0,0 M 000 0,,,0,0 M 00 0,,,0,0 M 000 0,,,0,0 class. R R 00 C 0 min M 0 M M M ension l Type OSB We reserve the right to make changes without prior notice

7 lindab duct suspension & support s Duct suspension SB Rectangular plain washer Surface finish: Hot dipped galvanized. b 0 b b ension b OSM Hexagonal studding connector Used together with threaded rod to reduce wastage to a minimum. Threaded in both ends with a stop in the middle. Surface finish: Electro zinc plated. M 0 M 0 M 0 M 0 Max load for different fire classes (Kg) SB R R 00 C 0 min class. M 0 0 M M M M ension OSM 0 SB FB We reserve the right to make changes without prior notice

8 lindab duct suspension & support s l Duct suspension EB Eye bolt Surface finish: Electro zinc plated. M, M, M, Max load for different fire classes (Kg) R R 00 C 0 min class. M M M ension EB We reserve the right to make changes without prior notice

9 lindab duct suspension & support Duct holder DH ensions Ø d L A B Description Used to fix ducts standing on joists. Is provided with fixing holes in the base. Varying height can be arranged by installing two duct supports, one inside the other. These can be locked with two self-tapping screws on each short side. The L dimension can then vary: for Ø 0 between 0 and 00, for Ø 0 between 0 and 0. Can also be delivered in additional sizes. ension Height L DH 0 0 nom * Reinforced A B L m kg 0 0 0,0 0, , 0 0,0 0 * 0 0 0, 0 * 0, * 0 0 0, * 0, 0 * 0 0 0, 0 * 0, 00 * , 00 * 0 0, 0 * 0 0 0, 0 * 0, , 0, , , , , 0 0 0,0 0 0, We reserve the right to make changes without prior notice

10 lindab duct suspension & support Duct holder DH Technical data Max load for different fire classes (Kg) R R 00 C 0 min class. 0 0 We reserve the right to make changes without prior notice

11 lindab duct suspension & support Duct holder MDH Ø 00 h M b d Description The folded shape of the duct holder and its multiple of fixation points makes the duct very firmly attached. The duct holder is suitable for of all types of duct mounting. I.e. vertical and horizontal onto a wall, hanging under a ceiling and standing on a floor. The screw holes are easy to access and shaped like double key-holes which makes the mounting fast and easy. Ø 0 0 h The duct is fastened with help of suspension rings UV0 or UVH0, which are threaded through the duct holder. ensions M M Ø 0 00 b h d d b nom b d h m kg , 0 0 0, 0 0 0, , , , , ension Distance to fixing surface, h MDH , , , ,0 0 0, We reserve the right to make changes without prior notice

12 lindab duct suspension & support Duct holder MDH nom b d h m kg 0 0, , , , , , , 00 0, , , , , ,0 Technical data Max load for different fire classes (Kg) class. R R 00 C 0 min Side R R Smoke 0 min We reserve the right to make changes without prior notice

13 lindab duct suspension & support Suspension rings UV ensions Ø, t 0 Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. code ension UV 00 nom t Can also be delivered in additional sizes. m kg 0,0 0, 0,0 0,,0 0, 0,0 0, 00,0 0, 0,0 0,,0 0,,0 0, 00,0 0, 0,0 0, 00,0 0, 0,0 0, 0,0 0,0 Technical data Max load for different fire classes (Kg) R R 00 C 0 min class We reserve the right to make changes without prior notice

14 lindab duct suspension & support Suspension rings UV0 ensions Ø, t Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. code ension UV nom t Can also be delivered in additional sizes. m kg, 0,0 0, 0, 0, 0,, 0, 0,0 0,0 00,0 0, 0,0 0,0,0 0, 00,00 0, 00,00 0, 0,00 0, 00,00 0, 00,00, 0,00, Technical data Max load for different fire classes (Kg) R R 00 C 0 min class We reserve the right to make changes without prior notice

15 lindab duct suspension & support Suspension rings UVH ensions Ø, t 0 Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. N.B. Is sold in pairs. code ension UVH 0 nom t Can also be delivered in additional sizes. m kg 0,0 0,0 0,0 0,0,0 0,0 0,0 0,0 00,0 0,0 0,0 0,0,0 0,0,0 0,0 00,0 0,0 0,0 0,0 00,0 0,0 0,0 0,0 0,0 0,0 Technical data Max load for different fire classes (Kg) R R 00 C 0 min class We reserve the right to make changes without prior notice

16 lindab duct suspension & support Suspension rings UVH0 ensions Ø, t 0 0 Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. N.B. Is sold in pairs. code ension UVH0 00 nom t Can also be delivered in additional sizes. m kg 0, 0, 0, 0,, 0, 0,0 0, 00,0 0, 0,0 0,0,0 0, 00,00 0, 00,00 0,0 0,00 0, 00,00, 00,00,0 0,00, Technical data Max load for different fire classes (Kg) R R 00 C 0 min class We reserve the right to make changes without prior notice

17 lindab duct suspension & support Circular suspension DRSN ensions Ø 00 Ø0 0 t t 0 t Description For suspension of circular ducting. Combined connection nut M/M and slotted quick closure for Ø 00. Ø 00 With slotted quick closure. With screw PH M 0. Connection nut M+M. Ø0 0 With Ø hole. With bolt and nut H M 0. Connection nut M+M. nom t m kg, 0, 0, 0, 0, 0,, 0, 0, 0, 0, 0, 0, 0,0 0, 0, 00, 0,, 0, 0, 0, 0, 0, 00, 0,, 0,, 0, 00, 0, 0, 0, 00, 0, 0,,00 00,,0 0,,,, 00,, code ension DRSN 0 00,, 00,, 0,,00 0,,0 We reserve the right to make changes without prior notice 0

18 lindab duct suspension & support Circular suspension DRSN Technical data Max load for different fire classes (Kg) Topnut class. R R 00 C 0 min Side class. R R 00 C 0 min We reserve the right to make changes without prior notice

19 lindab duct suspension & support Circular suspension DRSNR ensions Ø 00 t Ø0 0 0 t Description For suspension of circular ducting. With vibration-damping internal rubber lining. Combined connection nut M/M and slotted quick closure for Ø 00. code ension DRSNR 0 Ø 00 With slotted quick closure. With screw PH M 0. Connection nut M+M. Ø0 0 With Ø hole. With bolt and nut H M 0. Connection nut M+M. nom t m kg, 0, 0, 0, 0, 0,, 0, 0, 0, 0, 0, 0, 0, 0, 0,0 00, 0,, 0, 0, 0, 0, 0, 00, 0,0, 0,, 0, 00, 0, 0,,0 00,, 0,, 00,,0 0,,0,,0 00,,0 00,,00 00,,0 0,,0 0,,0 We reserve the right to make changes without prior notice 0

20 lindab duct suspension & support Circular suspension DRSNR Technical data Max load for different fire classes (Kg) Topnut class. R R 00 C 0 min Side class. R R 00 C 0 min We reserve the right to make changes without prior notice

21 0 00 lindab duct suspension & support Duct holder RK ensions Description Hot dip galvanized duct holder with foot. The ring is joined with two M bolts and nuts. The leg is joined with a M bolt and nut The foot has four fastening holes. nom Ring material m kg 0 0,0 0,0 0 0,0 00 0,0 0 0,0 0,0 00 0, ,0 0 0,0 00 0,0 00 0,0 0 0,0 ension RK 00 We reserve the right to make changes without prior notice 0

22 lindab duct suspension & support s Channels and channel brackets CL Cantilever Material: Hot dipped galvanized. To be fixed of walls, floors and ceilings as an assembly profile. 0 0 l 0 m kg Ø 0 0,0 00 0,0 0 0, 00 0, 00 0, CL 00 CLS Supported cantilever Material: Hot dipped galvanized. To be fixed of walls, floors and ceilings as an assembly profile.the diagonal support bar makes it suitable for heavy loads. a b l 0 a b m kg , , ,0 00 0,0 00 0, 00 0, CLS 00 Ø 0 We reserve the right to make changes without prior notice

23 lindab duct suspension & support s Channels and channel brackets RPA Channel Surface finish: Electro zinc plated. SLOT/ PLAI A B SLOT SLOT class. 00 C 0 min t B A c/c 0 c/c Ø,, B 00 lx B ension A B Type RPA SLOT We reserve the right to make changes without prior notice 0

24 lindab duct suspension & support s Channels and channel brackets RPC Channel Surface finish: Electro zinc plated. Available as plain or slotted. A B SLOT/ PLAI t 000 PLAI, 000 PLAI, 000 SLOT, 000 SLOT, 000 PLAI, 000 PLAI, 000 SLOT, 000 SLOT, A B 000 PLAI, 000 PLAI, 000 SLOT, t =, c/c 0 A 000 SLOT, 000 PLAI, 000 PLAI, 000 SLOT, 000 SLOT, t =, B class. 00 C 0 min lx lx ension A B Type RPC 000 SLOT, 0 We reserve the right to make changes without prior notice

25 lindab duct suspension & support s Channels and channel brackets Channel slide nuts Channel slide nuts and springs are self aligning and are specially manufactured to complement the range of RPC channels. The slide nut can be moved along the channel for ease of alignment whilst the springs tension the nut against the internal channel lips to facilitate installation. In addition to the shape of the slide nuts prevents turning inside the channel eliminating the need to grip the nut whilst inserting bolts or threaded rod. CN Channel nut, without spring 00 C 0 min class.,, 0 ension CN CNS Channel nut with spring ension CNS We reserve the right to make changes without prior notice 0

26 lindab duct suspension & support s Channels and channel brackets CNLS Channel nut long spring 00 C 0 min class.,, 0 ension CNLS CNSS Channel nut short spring 00 C 0 min class.,, 0 ension CNSS We reserve the right to make changes without prior notice

27 lindab duct suspension & support s Channels and channel brackets HHB Haer head bolt HTS Haer top screw 00 C 0 min class.,, 0 ension HHB 0 00 C 0 min class.,, 0 ension HTS 0 We reserve the right to make changes without prior notice

28 lindab duct suspension & support s Channels and channel brackets CEC Channel end cap for channel for channel For cannel CEC We reserve the right to make changes without prior notice

29 lindab duct suspension & support s Brackets WCL L-fastener Surface finish: Electro zinc plated. l l Ø 0 0 Max load for different fire classes (Kg) WCLT Fastening bracket Surface finish: Electro zinc plated. R R 00 C 0 min class code ension WCL l 0, 0, 00, l Ø, ( ) 0 0 Max load for different fire classes (Kg) R R 00 C 0 min class. 0 code ension WCLT 0 We reserve the right to make changes without prior notice

30 lindab duct suspension & support s Brackets WCZ Z-fastener Surface finish: Electro zinc plated. Ø Max load for different fire classes (Kg) WCMP MP-fastener For hanging in corrugated sheet metal roofing. The fastener fits wave bottoms of width 0 0. The fastener angle has holes of Ø,, intended for blind rivet or sheet metalscrew B. The fastener can handle a weight of kg without any deformation. R R 00 C 0 min class code ension code ension WCZ WCMP 0 We reserve the right to make changes without prior notice

31 lindab duct suspension & support s Brackets VIPPB Toggle For hanging in corrugated sheet metal roofing. 0 code ension VIPPB SPTRAD Coil wire Galvanized insulation thread. code ension SPTRAD We reserve the right to make changes without prior notice

32 lindab duct suspension & support Brackets WCRVG ensions º 0, 0 Ø, º, Ø, Ø Description RV suspension profile with shock absorbing rubber For suspension of ventilation ducts with the use of threaded rods and self-drilling screws or blind rivets. Allows fixing against trapeze type ceilings. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel :... WCRVG Technical data Max load for different fire classes (Kg) R R 00 C 0 min class. 0 We reserve the right to make changes without prior notice

33 lindab duct suspension & support Brackets WCVG ensions 0 Ø ( ) Ø Ø 0 Description V suspension profile with shock absorbing rubber For suspension of ventilation ducts with the use of threaded rods and self-drilling screws or blind rivets. Allows fixing against trapeze type ceilings. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel :... WCVG Technical data Max load for different fire classes (Kg) class. R R 00 C 0 min We reserve the right to make changes without prior notice

34 lindab duct suspension & support Brackets WCZGM ensions Ø, ( ) Ø 0 Ø Description Z suspension profile with shock absorbing rubber For suspension of ventilation ducts. Easy height adjustment by using threaded rod and hex nuts. Fixing with blind rivets or self drilling screws. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel :... WCZGM Technical data Max load for different fire classes (Kg) class. R R 00 C 0 min 0 We reserve the right to make changes without prior notice

35 lindab duct suspension & support Brackets WCLGM ensions Ø ( ),, Ø Description L suspension profile with shock absorbing rubber 0 Ø For suspension of ventilation ducts. Easy height adjustment by using threaded rod and hex nuts. Fixing with blind rivets or self drilling screws. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel :... WCLGM Technical data Max load for different fire classes (Kg) class. R R 00 C 0 min 0 We reserve the right to make changes without prior notice

36 lindab duct suspension & support s Brackets Beam clamp To fix on to beams without welding or drilling. With hexagon head screw DIN., threaded end with cup point according to EN ISO and locknut DIN. Available as threaded (BCT) or not threaded (BC). Material: Body made of malleable cast iron, zinc plated, casting tolerance acc. to DIN GTA /. BCT Threaded rod hole. M M M BC Not threaded rod hole. Max load for different fire classes (Kg) R R 00 C 0 min class.,, 0 ension BCT 0 We reserve the right to make changes without prior notice

37 lindab duct suspension & support s Frame support Stand Consisting of square tubes and a number of parts which are used to create a range of different structures. This stand is made up of square tubes in accordance with DIN and materials in accordance with SIS. The load diagram indicates the maximum permissible load with regard to flex sensing and does not take deflection into account. The diagram indicates the maximum permissible load for different distances between the supporting legs without exceeding the limit load in accordance with the Swedish Fatigue Design Code for Welded Structures, StBK-N, static load. This load diagram is applicable to all horizontal tubes with their associated supports, provided that there are no lateral forces. Load, kg B A 00 Square part SSTP Square tube SSR 0 0 c/c for support, m 0,,0,,0,0 0 0 A = Extended, evenly distributed static load tubes x x, B = Centrically applied static spot load x x, Example Load 0 kg, distributed evenly Stand tube x gives a max c/c between supporting legs of, m SSR Square tube Surface finish: Hot dipped galvanized., 000 SSR We reserve the right to make changes without prior notice

38 lindab duct suspension & support s Frame support SSTP T-piece Surface finish: Electro zinc plated. 0 0,0 SSF Support foot Surface finish: Electro zinc plated. 0 0,0 SSFA Adjustable foot Surface finish: Electro zinc plated. 0 0,0 SSTP SSF SSFA SSH Corner piece Surface finish: Electro zinc plated. 0 0,0 SSH We reserve the right to make changes without prior notice

39 lindab duct suspension & support s Frame support SSB Angle internal and external Surface finish: Electro zinc plated. SSB Angle 0 Surface finish: Electro zinc plated. SSVA Wall attachment Surface finish: Electro zinc plated. SSKV Corner X Surface finish: Electro zinc plated. 0 0,0 Angle 0 0,0 Angle 0 0,0 0 0,0 SSB SSB 0 SSVA SSKV We reserve the right to make changes without prior notice

40 lindab duct suspension & support s Frame support SBEI Pipe cover, inside Material: Plastic. for square tubes for square parts ension SBEU Pipe cover, outside Material: Plastic. for square tubes for square parts ension GMATTA, GKUDDE Anti-vibration mat Plain rubber mat, or thickness with 0 shore, or ribbed mat, designed for vibration damping, thickness with 0 shore. SBEI 0 SBEU 0 Code GMATTA 0 kg/cm² GKUDDE 0 kg/cm² GKUDDE 0 kg/cm² GKUDDE We reserve the right to make changes without prior notice

lindab duct suspension & support system Duct suspensions & Support systems

lindab duct suspension & support system Duct suspensions & Support systems lindab duct suspension & support system Duct suspensions & Support systems lindab duct suspension & support system Content Duct suspensions & Support systems Duct suspension Threaded rod OSB 0... Channels

More information

Lindab's recommendations

Lindab's recommendations Mounting instruction Suspension of ventilation systems Lindab's recommendations Content General Examples of suspension Lower requirements of bearing capacity Suspension without requirements of fire class

More information

Lindab s recommendations

Lindab s recommendations Mounting instruction Suspension of ventilation systems Lindab s recommendations Content General General Examples of suspension Lower requirements of bearing capacity Suspension without requirements of

More information

PROPER HANGING OF FIRE SPRINKLER SYSTEMS IFSA. All rights reserved.

PROPER HANGING OF FIRE SPRINKLER SYSTEMS IFSA. All rights reserved. PROPER HANGING OF FIRE SPRINKLER SYSTEMS 2010 IFSA. All rights reserved. 1 HANGING PER NFPA 13 2 Historical developments and basic concepts Hangers Hanger installation Special listed pipe Hangers in earthquake

More information

SECTION 15140 - PIPE HANGERS AND SUPPORTS

SECTION 15140 - PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the

More information

BZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No.

BZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No. Hexagon Nuts Full nut with metric coarse thread. Available in the following materials: Steel, Bright Zinc Plated. Din 934-8 Steel, Self Colour. Din 934-10. Stainless Steel; A2-70. Din 934. Also available

More information

Cast-in Channels 9-1.

Cast-in Channels 9-1. Cast-in Channels 9-1 www.cfsfixings.com Contents Typical Channel Applications 9-3 Typical Cast-in Channel Anchor Variations 9-4 Cast-in Channel - Cold Rolled 9-5 Cast-in Channel - Hot Rolled 9-7 T-Bolts

More information

SECTION 02832 CHAIN LINK FENCE AND GATES

SECTION 02832 CHAIN LINK FENCE AND GATES SECTION 02832 CHAIN LINK FENCE AND GATES PART 1 GENERAL 1.01 SECTION INCLUDES A. Fabrication, furnishing and installation of chain link fence, chain link gates, and extension brackets with barbed wire.

More information

LLOYD INDUSTRIES INC. DAMPER INSTALLATION INSTRUCTIONS

LLOYD INDUSTRIES INC.  DAMPER INSTALLATION INSTRUCTIONS DAMPER Installation and Maintenance Instructions 1-1/2 Hour Rated, UL Classified model 75 fire dampers For use in fire barriers with ratings of less than 3 hours INSPECTION 1. Inspect for shipping damage.

More information

Isover HVAC Application Handbook Installing fire protection insulation to metal ductwork

Isover HVAC Application Handbook Installing fire protection insulation to metal ductwork Isover HVAC Application Handbook Installing fire protection insulation to metal ductwork HVAC - Fire protection of metal ductwork Fire protection Thermal insulation Isover ULTIMATE TM Protect - Fire protection

More information

Used as closure strip at edges of greenscreen panels. Recommended on panel edges adjacent

Used as closure strip at edges of greenscreen panels. Recommended on panel edges adjacent Our Accessory Items list will provide your project with the necessary edge trims, mounting and joining clips, straps, posts, and caps to match your specified finishes with maximum flexibility. ½" leg x

More information

.2 Section Waste Management and Disposal..4 Section Testing, Adjusting and Balancing (TAB) of Mechanical Systems.

.2 Section Waste Management and Disposal..4 Section Testing, Adjusting and Balancing (TAB) of Mechanical Systems. Issued 2006/08/01 Section 15072 Vibration Isolation Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal.3 Section 03300 Cast

More information

G-2. Space Management. Above the Desk Space Management. Tool Bars

G-2. Space Management. Above the Desk Space Management. Tool Bars Space Management Above the Desk Space Management Custom Accents Space Management is designed to create added workspace for the office environment. By placing often used desk items in easy to access storage

More information

SOLAR SOLC201 On roof kit Installation Manual

SOLAR SOLC201 On roof kit Installation Manual SOLC201 On roof kit Installation Manual Page 1 of 32 0 Overall view Figure 1: Overall view of installation method Page 2 of 32 1 Contents 0 OVERALL VIEW 2 1 CONTENTS 3 2 BEFORE YOU START 4 2.1 GENERAL

More information

NATIONAL TELEPHONE AND FACSIMILE NUMBERS

NATIONAL TELEPHONE AND FACSIMILE NUMBERS R PRODUCT GUIDE INDUSTRIAL FANS COMMERCIAL & DOMESTIC FANS GRILLES / LOUVRES / DIFFUSERS DAMPERS DUCTWORK FILTRATION SUPPORT SYSTEMS AIR HANDLING / HEAT RECOVERY SYSTEMS AIR CURTAINS R Ordering from Vent

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

Instructions for Retrofitting T.M. Cobb and El and El Pocket Door Frames (recommended for 2x4 and 2x6 walls)

Instructions for Retrofitting T.M. Cobb and El and El Pocket Door Frames (recommended for 2x4 and 2x6 walls) Instructions for Retrofitting T.M. Cobb and El and El Pocket Door Frames (recommended for 2x4 and 2x6 walls) The Peterson Pocket Door System has been engineered to function in T.M. Cobb (www.tmcobb.com)

More information

Installation Instructions for Wall & Frame Mounted Overhead Cabinets

Installation Instructions for Wall & Frame Mounted Overhead Cabinets Installation Instructions for Wall & Frame Mounted Overhead Cabinets CAUTION MAKE SURE THE WALL MEETS THE LOAD CAPACITY REQUIREMENTS FOR THE OVERHEAD CABINET BEING INSTALLED. REFER TO LOCAL BUILDING CODES

More information

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices 04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust

More information

CONSTRUCTION STAGES STAGE 1: PRELIMINARY WORK, AUXILIARY MATERIALS, TOOLS

CONSTRUCTION STAGES STAGE 1: PRELIMINARY WORK, AUXILIARY MATERIALS, TOOLS CONSTRUCTION STAGES STAGE 1: PRELIMINARY WORK, AUXILIARY MATERIALS, TOOLS - TOOLS AUXILIARY MATERIALS FOR INSTALLATION OF MOLDS CONSTRUCTION OF FOUNDATIONS PREPARATION OF THE CONSTRUCTION SITE MARKING

More information

Gatorshield Steel Tubing

Gatorshield Steel Tubing steel tubing Gatorshield Steel Tubing ROUND STEEL TUBING Catalog # Size Gauge Bundle Qty. Price/Foot Price/Piece 014-108-288 1 x 24 18 127 $1.05 $25.20 014-104-288 1 x 24 14 127 $1.47 $35.28 014-104-276

More information

Organisational Kitchen Fittings Kitchen Cabinet Fittings

Organisational Kitchen Fittings Kitchen Cabinet Fittings Pull-out wire storage basket Finish: Chrome plated Load capacity: 30 kg Installation depth: 400 mm Version: Runners and baskets separated, designed for wardrobe interiors without doors Type of pull out:

More information

Machine Screws, Dowel Pins and Hardware

Machine Screws, Dowel Pins and Hardware Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-

More information

TECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE

TECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE TECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE Selecting a Fitting fittings are a blackheart malleable casting and are manufactured to BS EN 1562 1997 for the strength requirements. fittings

More information

FULLY FRAMELESS GLASS DIYGUIDE. Version 2

FULLY FRAMELESS GLASS DIYGUIDE. Version 2 DIYGUIDE Version 2 01 site measure Planning is the first step of any successful project. We have a large range of sizes to allow for varying site requirements. Simply decide where you would like your pool

More information

DIMENSIONAL BOLTING CATALOG

DIMENSIONAL BOLTING CATALOG DIMENSIONAL BOLTING CATALOG DIMENSIONAL CATALOG Table of Contents Page Screws Round Head Screws 1-1 Various Head Styles Machine Scerws 1-2 to 1-23 Tapping Screws (Approx. Hole Sizes) 1-24 Thumb and Wing

More information

Installation Manual For FE26 Iron Railing. Call for Installation Support. Extra Screws Included

Installation Manual For FE26 Iron Railing. Call for Installation Support. Extra Screws Included Installation Manual For FE Iron Railing Call 1-800-335-5909 for Installation Support Extra Screws Included Fortress Fe 2 Post Mounting Applications (USA) It is the responsibility of the installer to meet

More information

UNIT SHELF TYPE "C" SHELVING SYSTEM UNIT SHELF Glass Shelf Installation

UNIT SHELF TYPE C SHELVING SYSTEM UNIT SHELF Glass Shelf Installation 499 TYPE "C" XL-US02C Glass Shelf Installation * Insert clamp fasteners before mounting leveling legs. Glass Thickness 8 or 10mm Overall Height Max. 2600mm (102-3/8") Glass Width Max. 1200mm (47-1/4")

More information

SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement

SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement PART 1 GENERAL SECTION 32 31 00 EXPANDED METAL FENCING Meets Buy American Procurement 1.1 SUMMARY A. Section Includes 1. Supply and install all materials and accoutrements required for the installation

More information

PITCHED ROOF STRUCTURES

PITCHED ROOF STRUCTURES PITCHED ROOF STRUCTURES for framed and frameless photovoltaic modules Needed tools and materials: cordless screwdriver 10mm and 13mm spanners 5mm Allen key bolts, screws and tools for fixing the system

More information

Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers

Cable Installation Accessories. Cable Hoisting and Attachment. Snap-In Hangers. SnapStak Hangers SnapStak Hangers New design increases stack height SnapStak hangers have become the industry standard for maximizing space utilization on crowded towers and now that utility is further expanded with the

More information

ClearSpan Pro Solar Star Greenhouse Door Kits

ClearSpan Pro Solar Star Greenhouse Door Kits ClearSpan Pro Solar Star Greenhouse Kits (Double Sliding ) Ground Level Diagram shows a corrugated sliding door centered and installed in an end wall frame. The door kit includes materials for the door

More information

Formwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co.

Formwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co. Tie Rod & Formwork s well as containing our comprehensive range of Formwork Tie Sytems; this section also covers our market leading Rapidobat Column Former. Exclusive also to Formwork Direct are innovations

More information

SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT

SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Equipment

More information

Mechanical arms, belts and sheets

Mechanical arms, belts and sheets Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black

More information

UNIVERSAL RAILING, STEEL

UNIVERSAL RAILING, STEEL RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL

More information

Sliding and Folding Door Fittings Sliding Door Accessories

Sliding and Folding Door Fittings Sliding Door Accessories Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:

More information

STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM

STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM Chapter 9 STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM 9.1 BACKGROUND Steel is widely used in the construction of multi-storey buildings. However, steel construction is seldom used and is traditionally

More information

FUEL TANK KIT FITTING INSTRUCTIONS

FUEL TANK KIT FITTING INSTRUCTIONS A.Tank Fitting FUEL TANK KIT FITTING INSTRUCTIONS 1. Remove side panels and seat, disconnect the battery. 2. Remove SAS valve from LH frame guard and disconnect at plug, remove frame guard. 3. Remove rectifier

More information

WTW SWANTM. Linear slot air diffusers of wall-to-wall design for ceilings

WTW SWANTM. Linear slot air diffusers of wall-to-wall design for ceilings SWANTM WTW Linear slot air diffusers of wall-to-wall design for ceilings Quick facts Wall-to-wall installation Diffuser face of light aluminium design 2, 3 or slots Horizontal/vertical air distribution

More information

Dear costumers, You have just received our new catalogue with KOPOS KOLIN a.s. offer of metal cable support system products. Those types of products

Dear costumers, You have just received our new catalogue with KOPOS KOLIN a.s. offer of metal cable support system products. Those types of products Dear costumers, You have just received our new catalogue with KOPOS KOLIN a.s. offer of metal cable support system products. Those types of products were firstly introduced on the market in year 2007.

More information

Part # 11300210 67-70 GM B Body Complete CoilOver System

Part # 11300210 67-70 GM B Body Complete CoilOver System 350 S. St. Charles St. Jasper, In. 47546 Part # 11300210 67-70 GM B Body Complete CoilOver System Front Components: 1 11283510 Front HQ Series CoilOvers 1 11282899 Front Lower StrongArms 1 11283699 Front

More information

Corner Soldier Corner Soldier

Corner Soldier Corner Soldier Wall Formwork Corner Soldier Corner Soldier Designed to be used in congunction with standard soldiers, they simplify the construction of corners. By allowing ties to pass through in both direction, each

More information

ESD-ACCESSORIES. Reasons for this charging are for example: persons and their clothing workplaces including floors packaging constructions and tools

ESD-ACCESSORIES. Reasons for this charging are for example: persons and their clothing workplaces including floors packaging constructions and tools 1. 3 D S s e i r o s s e c c a 3 WORKPLACE SYSTEMS 3.12 ESD ACCESSORIES 2 E ESD-ACCESSORIES ESD (Electro Static Discharge) is the electrostatic discharge of charged objects or persons caused by direct

More information

SLIDING DOORS. 3. For doors fitted to the eave side of the building this header takes the form of an additional eave purlin.

SLIDING DOORS. 3. For doors fitted to the eave side of the building this header takes the form of an additional eave purlin. 1 SLIDING DOORS AGS/DR/03 The aim of this instruction is to guide you through the process of construction and fitting of Sliding Doors. Due to the number of sizes available this instruction is written

More information

TECHNICAL INFORMATION Models No. Description

TECHNICAL INFORMATION Models No. Description TECHNICAL INFORMATION Models No. Description HP2070, HP2070F, HP2071, HP2071F 20mm (3/4") 2-Speed Hammer Drill CONCEPT AND MAIN APPLICATIONS L W NEW TOOL P 1 /13 W L These hammer drills have been developed

More information

PB accessories. PB accessories. Labelling option. Order Information B4-2728. Printed board handle A BZA42727 BZA42724.

PB accessories. PB accessories. Labelling option. Order Information B4-2728. Printed board handle A BZA42727 BZA42724. Printed board handle A Assembly behind front panels Only use printed board handle in conjunction with printed board retainer A (6087-097) Insertion and extraction function Labelling option B4-2728 Item

More information

Beam Clamps for Rectangular Channels and Tubes

Beam Clamps for Rectangular Channels and Tubes Beam Clamps for Rectangular Channels and Tubes NuClamp quickly and securely attaches strut channels to I-beams or similar structural members. One version clamps at a 90 Degree angle. PN NC35 allows struts

More information

Tubular connection elements

Tubular connection elements KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular

More information

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12 September 2013 Page 1 of 12 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work shall consist of the supply and construction of a chain link fence, barb wire fences or mesh fences as shown on the Plans or

More information

Connection Solutions

Connection Solutions Connection Solutions DESIGN BUILD SYSTEM Connection Solutions for Cold formed Steel Construction Complies with; AS/NZS 4600:2005 AISI S100:2007 AS/NZ 1397 ASTM A653 DESIGN & BUILD SYSTEM FRAMECAD Construction

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

64 Push-to-Close Latch

64 Push-to-Close Latch 244 64 Push-to-Close Latch Pull-to-open Paddle latch Miniature Plastic slide 11 (.42) Stainless steel, passivated and brushed finish and glass-filled reinforced nylon, black working load: 90 N (20 lbf)

More information

Dura-Breeze Portable RV Screen Room

Dura-Breeze Portable RV Screen Room DBSR-08 Dura-Breeze Portable RV Screen Room Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory

More information

Preformed Metal Roofing and Siding

Preformed Metal Roofing and Siding Page -1-1. GENERAL 1.1. Description This specification along with the drawings covers the furnishing of all material, products, equipment, accessories, tools, services, transportation, labor and supervision

More information

Part # 11336799 63-72 Chevy C-10 Rear CoolRide Kit w/ StrongArms

Part # 11336799 63-72 Chevy C-10 Rear CoolRide Kit w/ StrongArms Components: 2 90006781 267c air spring 350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11336799 63-72 Chevy C-10 Rear CoolRide Kit w/ StrongArms 1 90000626

More information

Residential Deck Safety, Construction, and Repair

Residential Deck Safety, Construction, and Repair Juneau Permit Center, 4 th Floor Marine View Center, (907)586-0770 This handout is designed to help you build your deck to comply with the 2006 International Residential Building code as modified by the

More information

Ceiling Mounted Folding Attic Ladders Installation Instructions

Ceiling Mounted Folding Attic Ladders Installation Instructions Ceiling Mounted Folding Attic Ladders Installation Instructions WARNING Before you start installing your new Louisville Ceiling Mounted Folding Attic Ladder, you must read and understand the following:

More information

INSTALLATION OF A BAY WINDOW

INSTALLATION OF A BAY WINDOW INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening

More information

FLEXTRAY - Hanging Support Methods

FLEXTRAY - Hanging Support Methods 18 Eaton s B-Line series FLEXTRAY Wire Basket Accommodates 1 /4" and 3 /8" rod sizes Installs quickly with a screwdriver or pliers thus reducing installation time Requires only one hex nut (not included)

More information

These specifications shall apply to all high strength bolts and anchor bolts.

These specifications shall apply to all high strength bolts and anchor bolts. BOLTS (New Section) 972 972.1 REQUIREMENTS These specifications shall apply to all high strength bolts and anchor bolts. 972.2 SPECIFIC REQUIREMENTS A. General: All bolts, nuts, and washers shall have

More information

2015 CATALOGUE Industrial Products and Price List

2015 CATALOGUE Industrial Products and Price List McGowan Fence & Supply Limited 811 Progress Avenue Scarborough, Ontario M1H 2X4 Tel (416)431-5556 Fax (416)431-2595 2015 CATALOGUE Industrial Products and Price List QUALITY and Service Since 1948 TERMS

More information

Chapter 10 - Scaffolding Systems

Chapter 10 - Scaffolding Systems Chapter 10 - Scaffolding Systems Contents Chapter 10 - Scaffolding Systems... 10-1 Check and Oil the Pump Jacks... 10-4 Set Pump Jack Brackets... Error! Bookmark not defined. Set Pump Jack Poles... 10-5

More information

Tech Line: /5415 Front Strut Frame Installation 2 x3 Box Frame Rails and 1-5/8 Round Tube

Tech Line: /5415 Front Strut Frame Installation 2 x3 Box Frame Rails and 1-5/8 Round Tube Tech Line: 1-561-863-2188 5410/5415 Front Strut Frame Installation 2 x3 Box Frame Rails and 1-5/8 Round Tube These instructions are just one way of properly installing a strut front suspension. Depending

More information

Knürr Smaract. Knürr Smaract. CompactRack

Knürr Smaract. Knürr Smaract. CompactRack CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.

More information

- STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS -

- STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS - - STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS - PART 1.01: MATERIALS STEEL: All steel material for the fence and gate system shall conform to the requirements of ASTM A- 787 and ASTM A653

More information

HORIZONTAL INSTALLATION

HORIZONTAL INSTALLATION THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof

More information

HOSE, TUBE, AND PIPE CLAMPS

HOSE, TUBE, AND PIPE CLAMPS hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions

More information

ROLLER BLINDS INSTALLATION OPERATING AND CARE INSTRUCTIONS

ROLLER BLINDS INSTALLATION OPERATING AND CARE INSTRUCTIONS ROLLER BLINDS INSTALLATION OPERATING AND CARE INSTRUCTIONS MATERIAL AND TOOLS Each Roller Blind ordered should include: 1 pair of universal installation brackets. If a linked blind has been ordered you

More information

Pipe Clamps and Accessories

Pipe Clamps and Accessories Products 4.0 Products 4.1 Connection options to pipe clamps with Triple-Thread Connector NT 3G (M16, M10, M8) 4.2 Connection options to pipe clamps with Triple-Thread Connector NT 3G (3/8", M12, M10) 4.3

More information

Installation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...

Installation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-... Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information

More information

INSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)

INSTALLATION INSTRUCTIONS. 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) INSTALLATION INSTRUCTIONS 6108 Air Spring Kit 2011+ Ford F250 Single Wheel 4WD 2011+ Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113) Thank you for purchasing a quality Hellwig Product. PLEASE

More information

Pryda Timber Connectors

Pryda Timber Connectors Pryda Timber Connectors A complete guide to the design, specification and installation of Pryda Post Anchors March 2012 ESSENTIAL NOTES PRYDA PRODUCT GUIDES INTRODUCTION The information in this Product

More information

BUILD A TABLETOP LOOM

BUILD A TABLETOP LOOM BUILD A TABLETOP LOOM From 1" x 2" stock (actual 3/4" x 1"1/2) cut: 4 pieces 15" long 4 pieces 5"1/2 long Use the above to make 2 frames for the front and back of the loom. From 1" x 4" stock (actual 3/4"

More information

Saferand easierinstallation

Saferand easierinstallation EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little

More information

LIFTING SYSTEMS RR, RRPr, PLA, PNLF

LIFTING SYSTEMS RR, RRPr, PLA, PNLF LIFTING SYSTEMS RR, RRPr, PLA, PNLF Replaces the brochure 11/2006 3/2007 Benefits of Peikko lifting systems RR Wide model range Is installed to the surface of the mould, the mould remains solid RRPr Fully

More information

Guide rail bracket (for adjustable heads)

Guide rail bracket (for adjustable heads) (for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,

More information

Part # 11060210 59-64 Impala SA CoilOver Suspension Package

Part # 11060210 59-64 Impala SA CoilOver Suspension Package 350 S. St. Charles St. Jasper, In. 47546 Part # 11060210 59-64 Impala SA CoilOver Suspension Package Front Components: 1 11053510 HQ Series Front Coilovers 1 11052899 Front Lower StrongArms 1 11053699

More information

User information: Channels and corrosion User information: Cleaning of stainless steel channels

User information: Channels and corrosion User information: Cleaning of stainless steel channels 1 Miscellaneous History of pipe fastening systems Examples of applications Economic aspects 2 Project management 3 Description of system Channels Brackets Design components Connectors 3D parts 4 Technical

More information

Installation Manual Box Rail Series

Installation Manual Box Rail Series Installation Manual Box Rail Series INTRODUCTION THANK YOU for purchasing Real Sliding Hardware. Our hardware will add a stunning accent to your living environment and maximize its space. It is made with

More information

MultiPost-AP anchorage device

MultiPost-AP anchorage device MultiPost-AP anchorage device MultiPost anchorage point Type 1 Fixing on reinforced concrete with large, 360 rotating stainless steel lifting eye for the simultaneous securing of max. 2 persons. This can

More information

4-Post Equipment Rack Assembly Instructions

4-Post Equipment Rack Assembly Instructions Instruction Sheet 860421239 4-Post Equipment Rack Assembly Instructions General The 4-post equipment racks are industry standard 19-inch (483mm) and 23-inch (584mm) wide racks available in 7 foot (2.1m),

More information

CINCINNATI PRESS BRAKE ACCESSORIES Prices F.O.B. our Shop Harrison, Ohio

CINCINNATI PRESS BRAKE ACCESSORIES Prices F.O.B. our Shop Harrison, Ohio CINCINNATI PRESS BRAKE ACCESSORIES Prices F.O.B. our Shop Harrison, Ohio STANDARD FILLER BLOCKS FOR CINCINNATI PRESS BRAKES Set screws are on 12 centers starting 6 in from the end. PRICE LIST No. PB-36

More information

HI-LINE UTILITY SUPPLY CO. Phone: Fax:

HI-LINE UTILITY SUPPLY CO. Phone: Fax: 152 PINS FOR 1" INSULATORS - For Wood CrossArms - Long Shank w/ nut, washer & lock nut Cat. No. Dia. Shoulder Pin Length O.A. Length 881 10-3/4" 881A 5" 11-1/2" 883 2" 12-1/2" 884 11-3/4" PINS FOR 1" INSULATORS

More information

LOCKN LOAD FIRST TIME INSTALLATION

LOCKN LOAD FIRST TIME INSTALLATION LOCKN LOAD TM TRACK MOUNTING KIT HOLDEN COLORADO / ISUZU D-MAX DUAL CAB 2012 + 2 BAR TRACK HEAVY DUTY ROOF RACK SYSTEM MAX VEHICLE ROOF LOAD RATING: 100KG TOTAL LOAD EQUALS WEIGHT OF ROOF RACKS + ACCESSORIES

More information

MATERIAL SPECIFICATIONS

MATERIAL SPECIFICATIONS FENCING - 1 2-11-1 CHAIN LINK FENCE AND GATE(S) A. SCOPE MATERIAL SPECIFICATIONS This section covers the work necessary for the chain link fence gate(s), complete. General Like items of materials provided

More information

Front axle components, overview

Front axle components, overview just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,

More information

BenQ PROJECTOR CEILING MOUNT GUIDE

BenQ PROJECTOR CEILING MOUNT GUIDE BenQ PROJECTOR CEILING MOUNT GUIDE SAFETY INSTRUCTIONS 1. Follow the instructions in this manual when installing the projector with this bracket. Improper or inadequate installation could cause the projector

More information

Lathe Milling Attachment

Lathe Milling Attachment Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,

More information

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)

SECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here) SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2

More information

Galvanized Metal Fenders. Tread Aluminum Fenders. Plastic Fenders. Fender Brackets

Galvanized Metal Fenders. Tread Aluminum Fenders. Plastic Fenders. Fender Brackets Galvanized Metal Fenders Heavy duty stamped fenders are made from 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets not included. Wheel Size Dimensions

More information

Fire Sprinkler Hanging & Bracing Products. Innovative Hanging & Bracing Fire Protection Solutions

Fire Sprinkler Hanging & Bracing Products. Innovative Hanging & Bracing Fire Protection Solutions Fire Sprinkler Hanging & Bracing Products Innovative Hanging & Bracing Fire Protection Solutions Innovative Products From a Trusted Leader To help ensure the availability and operation of safety systems

More information

Söll GlideLoc Aluminium Ladders. Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073

Söll GlideLoc Aluminium Ladders. Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073 Söll GlideLoc Aluminium Ladders Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073 7 Söll GlideLoc Aluminium ladders Y-spar Profile 52 x 51 mm With connector Mounting

More information

Bunk Slicks. Bolts directly onto carpeted bunk boards. Fits 2 x 6 or 2 x 4 standard bunk boards. Slide on or off with less effort. Easy to Install.

Bunk Slicks. Bolts directly onto carpeted bunk boards. Fits 2 x 6 or 2 x 4 standard bunk boards. Slide on or off with less effort. Easy to Install. Bunk Board Guide On s 24 Part #86123 The 2x4 bunk boards are carpeted. Bunk placement if mounted above frame is 19. Outside of the frame there is 5-11 of side movement. U-bolts and nuts are zinc plated.

More information

SECTION 32 31 13 CHAIN LINK FENCES AND GATES

SECTION 32 31 13 CHAIN LINK FENCES AND GATES SECTION 32 31 13 CHAIN LINK FENCES AND GATES PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Fence framework, fabric, and accessories. 2. Excavation for post bases. 3. Concrete foundation for posts

More information

Speed-Mat Rectangle Cutter

Speed-Mat Rectangle Cutter Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.

More information

R O A D S M I T H TRIKE CONVERSIONS BY THE TRIKE SHOP

R O A D S M I T H TRIKE CONVERSIONS BY THE TRIKE SHOP R O A D S M I T H TRIKE CONVERSIONS BY THE TRIKE SHOP Please thoroughly review the instructions before and during installation. Keep in mind that this product was designed to be installed by trained dealer

More information

Chapter 3 Assembling the Storage Ladder

Chapter 3 Assembling the Storage Ladder Chapter 3 Assembling the Storage Ladder This chapter provides step-by-step instructions for assembling and attaching the Safety Ladder to the Storage Wall. General Information The Lista Safety Ladder provides

More information

Internal Strap Assemblies (Box Vehicles)

Internal Strap Assemblies (Box Vehicles) Commercial Body Fittings LOAD Internal Strap Assemblies (Box Vehicles) Part No. Working Buckle Webbing End Fitting Wgt. (kg) Length (mtr) CARG3309B 2.75 Overcentre 50mm Hook/Hook 0.59 CARG3312B 3.66 Overcentre

More information

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium

More information