UNIVERSAL RAILING, STEEL

Transcription

1 RAILINGS Page Universal Railing, steel Large Module Railing, steel Allround Railing, aluminium Module Railing, aluminium Standard Type Railing, aluminium

2 UNIVERSAL RAILING, STEEL Weland Universal Railing is manufactured in 4 different standard lengths which can be combined to any length in 250 mm steps. The railing bows are manufactured in two different heights, 1100 mm for pin fixing and 1200 mm for side fixing. Fixing components and other accessories such as kick strips and couplings can be supplied from stock. The railing bows are manufactured in large series and by applying rational methods, thus compatible prices can be offered. All stock components are hot dip galvanized. 500 mm 750 mm 1000 mm 2000 mm 108

3 STANDARD RAILING Post / Handrail: Ø 42 mm Intermediate rail: Ø 34 mm 1100 mm for pin fixing 1200 mm for side fixing Building Height Part no. Height Part no. Weight Meas ST ST , ST ST , ST ST , ST ST ,5 CHILDSAFE RAILING Intermediate bars: Daylight 100 mm Post / Handrail Ø 42 mm Intermediate rail: Ø 16 mm Lower rail: 30 x 8 mm 1100 mm for pin fixing 1200 mm for side fixing Building Height Part no. Height Part no. Weight Meas BS BS , BS BS , BS BS , BS BS ,6 KICK STRIP Height 100 mm For building measure Best.nr. Kg/st 500 SL ,3 750 SL , SL , SL ,0 2 self-drilling screws SS COUPLING Pre-drilled locating holes in all railings M8 screw with sleeve spacer KP FIXING WITH LOCATING PIN For bolting into concrete or wood. Can also be welded in place. Hot dip galvanized. Single for beginning/end TU ,6 kg Double with two pins TU ,2 kg SIDE FIXING For bolting into concrete or wood. Can also be welded in place. Hot dip galvanized. Single for beginning/end SR ,5 kg Double for 2 tubes SR ,8 kg Balustrades for this type of fixing should be 1200 mm high. OUTSIDE BUSHING for welding on existing construction. Provided with welded-on nut. Including screw. Hot Dip Galvanized UH ,6 kg Untreated UH ,6 kg INSIDE PIN Available in two forms.for casting into concrete: (one end cut open) or for welding to existing steelwork. Hot dip galvanized 300 mm IT ,3 kg Hot dip galvanized 150 mm IT ,1 kg Untreated 150 mm IT ,1 kg CONCRETE BASE Stable concrete base with cast-in handholds for easy removal. With two holes BF kg 109

4 LARGE MODULE RAILING, STEEL Weland Large Module Railing for continuous mounting. Start in one end and proceed from there, independent of lengths or corners. The railing is a complete system, and all components required are supplied from stock. The railing module is 6 m long and can be used complete or cut to required length. The railing is supplied in two different heights, 1230 mm för side fixing and 1100 mm for top fixing. All jointing is carried out with welding. The railing is designed for normal load. All components are hot dip galvanized. RAILING MODULE Post / Handrail: Ø 42 mm Intermediate rail: Ø 27 mm Daylight between posts: 1000 mm , ,3 END RAILING Post / Handrail: Ø 42 mm Intermediate rail: Ø 27 mm , ,5 110

5 CORNER JOINT FITTING WITH POST Post / Handrail: Ø 42 mm Intermediate rail: Ø 27 mm The post is at 221 mm distance from the corner 521 x ,0 521 x ,5 CORNER JOINT FITTING Handrail fitting: Ø 42 mm Intermediate rail fitting: Ø 27 mm 90 degrees corner Length Ø Part no. Weight 150 x ,2 150 x ,5 JOINT MODULES For handrail Ø 42 mm For intermediate rail Ø 27 mm Description Part no. Weight kg For handrail ,1 For intermediate rail ,1 KICK STRIP ,0 KICK STRIP OUTSIDE CORNER 150 x ,1 KICK STRIP INSIDE CORNER 150 x ,1 FIXING, TYPE R For side fixing Description Height Part no. Weight Typ R ,4 FIXING, TYPE R3 For top fixing Description Height Part no. Weight Typ R ,7 FIXING, TYPE R8 Reinforced fixing of end railing, for side fixing Description Height Part no. Weight Typ R ,3 FIXING, TYPE U42 For fixing of kick strips Description For Part no. Weight (mm) Ø kg Typ U ,1 111

6 ALLROUND RAILING, ALUMINIUM An aluminium railing of adapted, stocked, standardised components. Handrails, intermediate rails and kick strips are supplied in commercial lengths. The outstanding flexibility of the railing makes mounting an easy task. The material used is nature anodised aluminium, alloy SS The railing is also suitable for tough applications, i.e. in the chemical process industries and in purification plants. COMPONENTS FOR ALLROUND RAILING HANDRAIL Ø 50 mm 6250 mm ,8 kg/m INTERMEDIATE RAIL Ø 35 mm 6250 mm ,6 kg/m Corner with angle fixing L 90 BOW for round corners Ø 50 mm 500 mm Böj 50 0,7 kg Ø 35 mm 500 mm Böj 35 0,5 kg 112

7 H ANGLED HOLDER for normal corners Dimension Height Part no. Weight 50 x 50 x 3 mm 12 mm x 50 x 3 mm 25 mm JOINT PIECE Ø 45 mm 200 mm SK50 0,1 kg Ø 31 mm 200 mm SK35 0,1 kg Ø END PLUG Plastic Ø 50 mm Ø 35 mm POST 50 x 30 mm 1100 mm ,9 kg 50 x 30 mm 1200 mm ,0 kg HOLDER FOR HANDRAIL Dimension (mm) for Part no. Weight Ø 50, post 50 x SPECIAL HOLDER FOR ANGLED HAND- RAILS Dimension (mm) for Part no. Weight Ø 50 (top), post 50 x F 0,1(both) Ø 50 (base), post 50 x ,1(both) HOLDER FOR INTERMEDIATE RAIL Dimension (mm) for Part no. Weight Ø 35, post 50 x D SIDE FIXING Dimension for Depth Part no. Weight Post 50 x 30 mm 80 mm ,3 kg ❶ ❷ H ❶ ❷ FLOOR FIXING ALUMINIUM FLOOR FIXING STEEL hot dip galvanized Dimension for Height Part no. Weight Post 50 x 30 mm ❶ ,3 kg Post 50 x 30 mm mm ❷ ,8 kg KICK STRIP 100 x 50 mm 6250 mm ,0 kg 113

8 MODULE RAILING, ALUMINIUM The Weland Module Railing offers a flexible and economical railing system. The railing is manufactured from Ø 50 mm aluminium tube and thus easily mounted and maintenance-free. The module measurements 500, 750, 1000 and 2000 mm give every possible length combination in 250 mm steps. The module railing is suitable for small guard railings as well as for protective railing in larger plants such as refuse disposal units, port installations, athletic grounds etc. 500 mm 750 mm 1000 mm 2000 mm The distance between the modules is 70 mm 114

9 MODULE RAILING Post, handrail and intermediate rail Ø 50 mm. Railing can also be supplied with height 1200 mm for side fixing Building Height Part no. Weight Measure (mm) kg 500 mm 1100 AMO ,5 750 mm 1100 AMO , mm 1100 AMO , mm 1100 AMO ,0 CHILDSAFE RAILING Childsafe with vertical bars, daylight maximum 100 mm. Railing can also be supplied with height 1200 mm for side fixing Building Height Part no. Weight Measure (mm) kg 500 mm 1100 ABMO ,3 750 mm 1100 ABMO , mm 1100 ABMO , mm 1100 ABMO ,9 70 COUPLING Stabilises the railing. Provided with pre-drilled holes in all posts. Description Height Part no. Weight Ø mm ,1 kg Nut M8 50 mm Insex screw M8 20 mm FIXING WITH GUIDE PIN For bolting into wood or concrete. Can also be welded in place. Hot dip galvanized Description Part no. Weight Single AFS ,8 kg Double AFS ,6 kg SIDE FIXING Intended for side fixing, i.e. in garage entrances, loading platforms, balconies etc. Can also be welded in place. Hot dip galvanized Description Part no. Weight Single ASI ,3 kg Double ASI ,5 kg Railings for this type of fixing must be 1200 mm high. State height when ordering CONCRETE BASE With cast-in sleeves, like side fixing. Description Part no. Weight Double ABF kg KICK STRIP Aluminium 100 x 50 mm. Fixing onto post by means of pop rivets. Length Part no. Weight ,0 kg 115

10 STANDARD TYPE RAILING, ALUMINIUM The construction of the Weland railing makes is suitable for all possible final designs. The framework consists of aluminium s and can be cladded with almost any material such as metal sheet, wood, glass, all sorts panels cross bars etc. This extensive choice of material also facilitates the choice of colour. Handrails are available in a large variety, and different types for fixing the posts can be supplied. A railing that in every way can be adapted to your requirement. Handrail Top Sheet Fixing Profile Post Bottom Sheet Fixing Profile Cladding Post Bracket 116

11 HANDRAIL Nr. 10 Nr. 20 Nr. 30 Nr. 40 Nr. 50 Nr. 60 Nr. 70 FIXING CHEMICAL ANCHOR FLOOR FIXING CLADDING CROSS BARS Square or halfround bars. Daylight maximum 100 mm GLASS Laminated or hardened glass. PANEL MATERIAL Principally any panel material obtainable can be used provided the panel thickness is between 4 and 8 mm. LATTICE / EXPANDED METAL Crenelled lattice, expanded metal or perforated plate with hole sizes to requirement. 117