BIS Gulv / Radiator Beslag
|
|
- Elvin French
- 8 years ago
- Views:
Transcription
1 O BIS Gulv / Radiator Beslag BIS Manifold Fixings BIS Manifold Fixing 2 BIS Pipe Protection BIS Protection Plate BIS Two-Part Floor Bend BIS Floor Bend BIS Bend Guider BIS Protective Pipe BIS PE Flexible Pipe Sleeve BIS Rørbærer BIS Dobbeltrørbærer BIS Shouldered Masonry Nail for BIS Floor Clamp BIS Plug Clamp BIS Plug Clamp BIS Tacker System BIS Tacker Clamp BIS Cast-in Pipe Clamp BIS Rosettes BIS Rosette BIS Double Rosette BIS Supports for Wall-Mounted Gas Heaters BIS Gas Heater Support 18 BIS Panel Radiator Fixings BIS Fixing Set for Isolated Radiator (OS1/ZVH) BIS Fixing Set for Radiator (OS1/ZVH) BIS Panel Radiator Foot BIS Ribbed Radiator Fixings BIS Ribbed Radiator Foot BIS Side Holder BIS Radiator Hanging Bracket
2 O BIS Gulv / Radiator Beslag BIS Manifold Fixing fixing for manifold-units Ø 3/4-1.1/2" (26,9-48,3 mm) (O 05 05) materiale: stål elforzinket sound proofing lining made of natural rubber, black lydisolerende indlæg i henhold til DIN 4109 Art.nr. D D Model Pakke1 (mm) (") ,9 ¾ Enkel ,0 1 Enkel ,3 1½ Enkel ,9 ¾ Dobbelt ,3 1½ Dobbelt 25 Other types on request. Supplement 3 BIS Protection Plate 4 BIS Two-Part Floor Bend
3 BIS Gulv / Radiator Beslag O BIS Protection Plate pipe protection (O 10 05) to protect hidden pipework after pouring materiale: stål processing floor pre-galvaniseret protection of plastic pipes from screws or nails Art.nr. Pakke
4 O BIS Gulv / Radiator Beslag BIS Two-Part Floor Bend (O 10 10) guiding of plastic floor pipe 12 mm two-part floor bend protects the pipe against mechanical damage ('buckle') for pipe sleeve up to Ø 25 mm with perforation line for separation into 2 single floor bends distance strip simplifies setting of distance between wall and bend double eye to fix centre distance during casting foot plate with dove tail: increases centre distance from 35 to 50 mm by switching the left and right floor bend upperpart easily tackable to bottomplate materiale: PP (polypropylen), creamcoloured (according to RAL 1013) Art.nr. D Pakke1 (mm) Supplement 7 BIS Protective Pipe 10 BIS Shouldered Masonry Nail
5 BIS Gulv / Radiator Beslag O BIS Floor Bend guiding of plastic floor pipe 12 mm (O 10 15) protects the pipe against mechanical damage ('buckle') for pipe sleeve up to Ø 25 mm materiale: PP (polypropylen), creamcoloured (according to RAL 1013) Art.nr. D Model Pakke1 (mm) Enkel Dobbelt 25 Supplement 7 BIS Protective Pipe 10 BIS Shouldered Masonry Nail Alternativ 4 BIS Two-Part Floor Bend
6 O BIS Gulv / Radiator Beslag BIS Bend Guider guiding of plastic floor pipe mm (O 10 20) to make 90 corners with plastic floorpipes pipe guidance corresponding prescribed bending radius 5xD smooth finish: pipe can be fixed without damage good grip due to special design material: glass-fibre reinforced PA (polyamide), black temperature resistance up to +140 C Art.nr. D B H Pakke1 (mm) (mm) (mm)
7 BIS Gulv / Radiator Beslag O BIS Protective Pipe pipe protection (O 10 25) Art.nr : one-part protective sleeve (L = 1m) Art.nr and : two-part protective sleeve (L = 15 cm) protects pipe between floor bend and radiator against mechanical damage and UV-radiation easily cut to size fits perfectly to upper side of BIS floor bend materiale: PP (polypropylen), creamcoloured (according to RAL 1013) or white (according to RAL 9013) Art.nr. L Colour Pakke1 Enhed m Cream 50 m mm Hvid 20 Stk mm Cream 20 Stk
8 O BIS Gulv / Radiator Beslag BIS PE Flexible Pipe Sleeve (O 10 30) pipe protection Ø mm protective sleeve for all types of pipe, in wall ducts or in concrete material: LDPE (low-density polyethylene), white temperature resistance from -30 C to +80 C Art.nr. D L Pakke1 Enhed (mm) m 100 m m 100 m m 100 m m 50 m m 50 m.
9 BIS Gulv / Radiator Beslag O BIS Dobbeltrørbærer for floor pipe Ø mm (O 15 05) sammenhængende u-beslag rørbærer for montering af varmerør i gulvet, før det bliver støbt i beton øget styrke ved hjælp af profilens form materiale: stål elforzinket Art.nr. D Model B s k Pakke1 (mm) (mm) (mm) (mm) Enkel 43 1, Enkel 47 1, Enkel 52 1, Enkel 55 1, Dobbelt 61 1, Dobbelt 69 1, Dobbelt 79 1, Dobbelt 85 1, mm 20 mm D 25 mm B Ø 5,5 mm 5 mm XX 1 mm D 5 mm B k 20 mm Ø 5,5 mm XX Supplement 10 BIS Shouldered Masonry Nail
10 O BIS Gulv / Radiator Beslag BIS Shouldered Masonry Nail (O 15 10) for floor clamps Art.nr : can be hammered into concrete without pre-drilling a hole Part No : with hand protection and ergonomic hand grip Art.nr : materiale: stål , tempered Art.nr. Model Pakke1 Pakke BIS Shouldered Masonry Nail BIS Hammer-in tool 1 -
11 BIS Gulv / Radiator Beslag O BIS Plug Clamp for floor pipe 28 mm (O 15 15) rørbærer for montering af varmerør i gulvet, før det bliver støbt i beton materiale: PA (polyamid), grøn Art.nr. D Model B H Pakke1 Pakke2 (mm) (mm) (mm) Enkel Enkel Enkel Dobbelt Dobbelt Alternativ 9 BIS Dobbeltrørbærer
12 O BIS Gulv / Radiator Beslag BIS Plug Clamp for floor pipe mm 391 (O 15 17) B rørbærer for montering af varmerør i gulvet, før det bliver støbt i beton materiale: PA (polyamid) D Art.nr. D Model B H k Pakke1 (mm) (mm) (mm) (mm) Enkel Enkel Dobbelt Dobbelt H h X B k D H h X Ø 6 mm
13 BIS Gulv / Radiator Beslag O BIS Tacker System for floor pipe Ø mm (O 15 20) the BIS Tacker system consists of wide materiale: PP (polypropylen), sort and stable clamps and a problem free tacker device Art.nr : Tacker device for a quick processing of tacker clamps (KA8 and KAL) Art.nr (type KA8): for insulating plates from 25 mm thickness with foil Art.nr (type KAL): for insulating plates from 40 mm thickness without foil (e.g. Styrodur, Styropor ) for floor pipe up to Ø 20 mm Art.nr : Tacker device for a quick processing of tacker clamps (KA8 and KAL) Art.nr (type KA8): for insulating plates from 25 mm thickness with foil by means of self-adhesive tape attached together per 20 pieces Art.nr. D Model Type H Pakke1 Pakke2 (mm) ,0 Tacker KA BIS Tacker Clamps (short) KA BIS Tacker Clamps (long) KAL (mm)
14 O BIS Gulv / Radiator Beslag BIS Tacker Clamp for floor pipe to burling plate or rail Ø 20 mm (O 15 25) for a manual fixing of floor pipe to profiled plate or rails e.g. Raufix on isolation plate for floor pipe up to Ø 20 mm can be used in addition to burled plates near manifolds, pipe bends and damaged plates shape retaining clamp ends length adapted to various insulation thicknesses almost all common rails have punched holes adapted to these clamps materiale: PP (polypropylen) Art.nr. D H Colour Pakke1 Pakke2 (mm) (mm) Black Red Grøn Alternativ 13 BIS Tacker System
15 BIS Gulv / Radiator Beslag O BIS Cast-in Pipe Clamp floor pipe to steel reinforcement Ø mm (O 15 30) for clamping to steel reinforcement weld material: PE (polyethylene) mesh suitable for each postion (can be fitted on the cross or crosswise on the steel reinforcement weld mesh) Art.nr. D DN H h b x s Colour Pakke1 Pakke2 (mm) (mm) (mm) (mm) (mm) x 3,0 Blue x 5,0 Yellow
16 O BIS Gulv / Radiator Beslag BIS Rosette finishing of pipe apertures Ø mm (O 20 05) one-part rosette for finishing of pipe apertures materiale: PP (polypropylen), hvid (i henhold til RAL 9016) Art.nr. D B H Pakke1 Pakke2 (mm) (mm) (mm)
17 BIS Gulv / Radiator Beslag O BIS Double Rosette finishing of pipe apertures Ø mm (O 20 10) for finishing of pipe apertures both parts are securely connected Art.nr XX: for copper or metal ingen skade ved befæstelse (egnet til alle pipes (Ø 12, 15, 18 or 20 mm) tykkelser) Art.nr XX: for plastic or multilayer material: ABS, white (according to RAL pipe (Ø 14, 16, 17 or 20 mm) 9010) Art.nr. D B k Pakke1 Pakke2 (mm) (mm) (mm)
18 O BIS Gulv / Radiator Beslag BIS Gas Heater Support (O 25 05) fixing of gas heaters universal console for fixing of all current types of wallmounted gas heaters ideal for situations without a wall (eg. under slanted roof) 3 lateral dimensions: an overview per brand/type wall-mounted gas heater to determine the necessary console will be sent on request for the greater part pre-assembled with height-adjustable cross beams with 2 sliding tee-bolt assemblies for heaterfixing materiale: stål studs: pre-galvanized; cross-beams: zinc plated packed in plastic film (clean and complete at the construction site) incl. assembly instructions Art.nr. Model B Pakke1 (mm) Gas Heater Support Gas Heater Support Gas Heater Support 900 1
19 BIS Gulv / Radiator Beslag O BIS Fixing Set for Isolated Radiator (OS1/ZVH) fixing of central heating radiators (O 30 05) fixing set (OS1 - ZVH) for radiators with sharp weld on top and side with plastic insert to prevent annoying noises support and slide provided with reinforcement groove materiale: metal dele lavet af stål; plastik dele lavet af POM (polyoxymethylen), creamcoloured; plug of PA (polyamide) elforzinket temperature resistance from -25 C to +120 C Part No : 2 Bottom supports (Part No ) 2 Upper/Side supports (Part No ) 1 Fixing set (Part No ) Part No : 2 Bottom supports (Part No ) 2 Upper/Side supports (Part No ) 1 Fixing set (Part No ) Art.nr. Model Type Pakke1 Pakke Fixing set for radiator OS1/ZVH Upper/Side support Bottom support Fixing set Parts also separately available.
20 O BIS Gulv / Radiator Beslag BIS Fixing Set for Radiator (OS1/ZVH) (O 30 10) fixing of central heating radiators fixing set (OS1 - ZVH) for radiators with sharp weld on top and side support provided with reinforcement groove material: metal parts made of steel; plug made of PA (polyamide) elforzinket Part No : 2 Bottom supports (Part No ) 2 Upper/Side supports (Part No ) 1 Fixing set (Part No ) Art.nr. Model Type L LU S Pakke1 Pakke Fixing set for radiator OS1/ZVH Upper/Side support mm , Upper/Side support mm , Bottom support - 50 mm , Bottom support mm , Parts also separately available. (mm) (mm) Alternativ 19 BIS Fixing Set for Isolated Radiator (OS1/ ZVH)
21 BIS Gulv / Radiator Beslag O BIS Panel Radiator Foot fixing of panel radiators (O 30 20) support for panel radiator with sharp weld on bottom side supports radiator during fixing (no heavy lifting) materiale: stål elforzinket Art.nr. Type Pakke
22 O BIS Gulv / Radiator Beslag BIS Ribbed Radiator Foot (O 35 05) fixing of ribbed radiators support for ribbed radiators supports radiator during fixing (no heavy lifting) fix radiator by means of nuts with tabs materiale: stål elforzinket Art.nr. Type Pakke
23 BIS Gulv / Radiator Beslag O BIS Side Holder fixing of ribbed radiators (O 35 10) wall holder for ribbed radiator with round materiale: stål water channels elforzinket clamped material thickness support: 3 mm distance between wall and waterchannel: 58 mm Art.nr. Type Pakke
24 O BIS Gulv / Radiator Beslag BIS Radiator Hanging Bracket (O 35 20) fixing of panel radiators wall holder for panel- or ribbed radiators with cover strip (up to 3.5 mm) the distance to the wall can be determined by sawing or cutting off the front side (27.5, 39 or 50 mm) materiale: stål elforzinket Art.nr. Type Pakke
UNIVERSAL RAILING, STEEL
RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL
More informationmechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
More informationBIS WC Element / Lyft Alpro
W BIS WC Element / Lyft Alpro BIS WC Frames BIS Walkon BIS Walkon Quattro BIS Walkon Top BIS Walkon Comfort BISMAT VN (Quattro) BIS Control Panel Ellipse / Cube BIS Control Panel Space (BISMAT Top) BIS
More informationPB accessories. PB accessories. Labelling option. Order Information B4-2728. Printed board handle A BZA42727 BZA42724.
Printed board handle A Assembly behind front panels Only use printed board handle in conjunction with printed board retainer A (6087-097) Insertion and extraction function Labelling option B4-2728 Item
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationOwner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions PM01 BASE KIT Model No. FDN1014 717090311 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY
More informationGuidelines for Earthquake Bracing of Residential Water Heaters
Guidelines for Earthquake Bracing of Residential Water Heaters Department of General Services Division of the State Architect 1102 Q Street, Suite 5100 Sacramento, CA 95814 Phone: (916) 324-7099 Fax: (916)
More informationTECHNISCHE FICHE - TECHNISCHE FICHE - Chat Board: Classic
- TECHNISCHE FICHE - Chat Board: Classic Classic is a magnetic glass- and writing board for use in modern offices and private homes. CHATBOARD Classic is Danish Design - made in Denmark. Classic is a glass
More informationUB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS
UB1 AIR CONDITIONING UNIT INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS: Carefully read these instructions before installing your new air-conditioner. AUSTRALIAN AUTOMOTIVE AIR AL00500054E 1 Table
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationBIS Metal Pipe Clamps with Lining
A BIS Metal Pipe Clamps with Lining BIS Clamps BISMAT Flash BISMAT 2000 Ø ¼ - 2" BISMAT 2000 Ø 2½ - 4" 2 3 4 BIS Industrial Clamps BIS Heavy Duty Clamps HD1501 (1/2") (BUP1000) 5 BIS Clamps for Plastic
More informationInstallation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More informationPipe Clamps and Accessories
Products 4.0 Products 4.1 Connection options to pipe clamps with Triple-Thread Connector NT 3G (M16, M10, M8) 4.2 Connection options to pipe clamps with Triple-Thread Connector NT 3G (3/8", M12, M10) 4.3
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
More informationM.P.M. PLASTIC MATERIALS EXTRUSION JUNE 2009 M.P.M. ESTRUSIONE MATERIE PLASTICHE
PLASTIC MATERIALS EXTRUSION Cold rooms and refrigerated cabinets profiles JUNE 2009 1 PLASTIC MATERIALS EXTRUSION C O N T E N T S 1 - STANDARD SYSTEM page 5 2 - SPEED SYSTEM page 9 3 - CLEAN SYSTEM page
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationDIAMOND Retractable Rodding Robot Model SPRAYROD-R
2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More informationGPD Rubber Press Seals
GPD Rubber Press Seals Leading in in ideas SYSTEM-TECHNIK GPD Rubber Press Seals Design Available with a rubber thickness of 30 mm for sealing against non-pressing water and a rubber thickness of 60 mm
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationHow To Buy A Designo Grille
anal ompact anal Plus 1 2 3 1. omplete anal Plus underfloor unit 2. Heat exchanger and inside finish of the duct in dark grey 3. Enlarged range of grilles anal Plus Operating principal Options Flexible
More informationProduct Information 19 / 45HU Data-Center-Rack (Cabinet)
The Rosenberger-OSI Data-Center-Rack has been developed especially for FO patch distributors in Data Centers. In Data Centers the requirement for highest density becomes increasingly more important than
More informationSchlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
More informationGuidelines for Earthquake Bracing Residential Water Heaters
Guidelines for Earthquake Bracing Residential Water Heaters Department of General Services Division of the State Architect In accordance with the Health and Safety Code Section 19215, the Division of the
More informationInForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
More informationTechnical catalogue convectors POLAND 2012
Technical catalogue convectors POLAND 2012 index convectors review...3 Narbonne...4 Narbonne VT... 10 Narbonne V... 16 Narbonne V VT... 20 mounting distances for Narbonne...26 mounting distances for Narbonne
More informationRittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow
More informationINSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR
INSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR (For NEW 2007 ALL WHITE KWIK-KITS ONLY) Warning do not attempt to install A/C units unless you are experienced with servicing
More informationREMOVE AND REPLACE AIR CONDITIONER. 170 Popular Dodge REMOVAL: AIR CONDITIONING Section 4 Page 1
Section 4 Page 1 REMOVE AND REPLACE AIR CONDITIONER 170 Popular Dodge REMOVAL: 1. Turn main breaker to the OFF position. 2. Unplug Air conditioner unit. 3. Remove cabinet doors on either side of Air conditioner.
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationSaferand easierinstallation
EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little
More informationSTRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM
Chapter 9 STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM 9.1 BACKGROUND Steel is widely used in the construction of multi-storey buildings. However, steel construction is seldom used and is traditionally
More informationcontents classic 3 switch 4 mini swing 5 sign wedge 6 chalkboards 7 all purpose A frames 8 H2O swingmaster 9 café banner 10 vision 11
the sign selection pavement swing signs pavement foil signs A boards forecourt signs pavement banner stand systems A frame banners promotion units snapframe signage suspended poster rails contents PAVEMENT
More informationBeautifully Traditional
Arcade 800mm Single Sliding Door Quadrant - nickel Arcade 900mm Single Sliding Door Quadrant - nickel ARC48 ARC49 INSTALLATION INSTRUCTIONS A www.arcadebathrooms.com IMPORTANT - Please read before installation
More informationInstallation Instructions
Installation Instructions READ BEFORE INSTALLING UNIT For Low Profile Window Air Conditioner INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Follow each step
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationSCREEN PRINTING INSTRUCTIONS
SCREEN PRINTING INSTRUCTIONS For Photo-Imageable Solder Masks and Idents Type 5600 Two Part Solder Masks and Idents Mega Electronics Ltd., Mega House, Grip Industrial Estate, Linton, Cambridge, ENGLAND
More informationPolicy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996
CITY OF SAN JOSE BUILDING DIVISION POLICY Policy on Water Heater Installations Policy No. UPC 510-1-94 Effective: September 1, 1995 Revised: February 10, 1996 All new and replacement water heaters installed
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationbuilding applications copper - redefined
building applications copper - redefined copper - redefined The task The development of an innovative tube for the future: economical, environmentally friendly, ecological, completely safe and easy to
More informationGeekDesk Max Instructions for Assembly & Use
GeekDesk Max Instructions for Assembly & Use Work Sitting OR Standing! With the touch of a button... Elevate Your Work Instructions release 1.5, 2012-08-09 WELCOME! Thank you for purchasing a GeekDesk!
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationlindab duct suspension & support system Duct suspensions & Support systems
lindab duct suspension & support Duct suspensions & Support s lindab duct suspension & support Content Duct suspensions & Support s Duct suspension Duct suspension FB... DRSN... 0 DRSNR... 0 Channels and
More informationSECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationHORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationPANELIZED HOME INSTALLATION GUIDELINE
PANELIZED HOME INSTALLATION GUIDELINE A typical home package will be constructed of Snap-N-Lock Insulated Panels clad with steel skins. 4" panels will be used for the walls, and 6" panels for the roof.
More informationHDA -----------------------------------------------------------
----------------------------------------------------------- Lightstrips ---------------------------------------------------------------------- Ceiling system for heating and cooling LIGHTSTRIPS LIGHTSTRIPS
More informationConfort 160. Sliding Systems. Sapa Building System
Confort 160 Sliding Systems Sapa Building System Confort 160 is a high performance thermally insulated sliding window system, with a user-friendly slide action. The system, which has an attractive aesthetic
More information6 LED colours: White Blue Green Red Yellow Amber
Illuminated contours can be found in many places on petrol stations and buildings of industrial, commercial and service companies. Such light bands visually emphasize the contours of a building during
More informationDIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
More informationRemovable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
More informationAlways. Reliable. Tight. Wall sleeves Versatile solutions for building entries. cablepipebuildingentry+
Always. Reliable. Tight. Wall sleeves Versatile solutions for building entries. cablepipebuildingentry+ The wall sleeve The wall sleeve a largely unnoticed but very important sealing part. Wall sleeves
More informationEWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
More informationHanson Building Products. precast basement solutions
Hanson Building Products precast basement solutions Hanson Building Products Basement Systems Add an extra dimension and combine the inherent flexible, structural and waterproof properties of concrete
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More informationCAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
More informationCUSTOMER FLOW MANAGEMENT
Reduce the length of queues and ensure fair service: With Turn-O-Matic customer flow management from METO your customers are served in turn. Studies show that customers who take a number from the system
More informationCNC Tool Storage Solutions
CNC Tool Storage Solutions SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes
More informationINSTRUCTIONS: LocknCharge Laptop Carts
INSTRUCTIONS: LocknCharge Laptop Carts www.lockncharge.com Extra Tools required: Hammer, Philips head screwdriver, medium adjustable spanner. (Allen key supplied) (Panel colours for illustration purposes
More informationW I T H I N J O I ST S I N STA L L AT I ON
Radiantec W I T H I N J O I ST S I N STA L L AT I ON I N S TA L L AT I O N S U P P L E M E N T 260 Joists When tubing is placed beneath a joisted floor system, it is weaved between the joists and supported
More information1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS
By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool
More informationCHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More informationVITOSOL r 200-T SP2A. VITOSOL 200-T Type SP2A
Technical Data Manual Model Nos. and pricing: see Price List Vacuum tube collector based on the heat pipe principle For the utilisation of solar energy VITOSOL r 200-T SP2A Product may not be exactly as
More informationTerminal Boxes Series 8146
Series > Enclosures in shock-resistant glass fibre reinforced polyester resin > basic enclosure sizes various heights > Fitted according to the customer's requirements > For terminals up to max. 00 mm
More informationCNC Tool Storage Solutions
Solutions CNC TOOL STORAGE SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes
More informationCedar Cottage Doghouse Plans
Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent
More informationPlate carrier, Strap-on DF -13 MANUAL
Plate carrier, Strap-on DF MANUAL THE COMPLETE SYSTEM What is the complete system? The strap on system is developed to be an integral part of the soldier s equipment, working together with all other parts
More informationCNC Tool Storage Solutions
CNC Tool Storage Solutions Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes itself in
More information9. Direct screwing into plastics and metal
9. Direct screwing into plastics and metal 9.1 Direct screwing into plastics The use of plastics is gaining in importance through new application possibilities. Optimised thread pitch Advantages here are
More informationElectrical for Detached Garages: Updated Feb 19, 2016 for 2015 CE Code in force Jan. 1, 2016. Underground branch circuit feeding a detached garage:
Electrical for Detached Garages: Updated Feb 19, 2016 for 2015 CE Code in force Jan. 1, 2016 * Garage construction requires permits (electrical, building) * Permits must be applied for at the time. * Dial
More informationEdition Perfect combination ratiopacpro Electronic P Edition kaging www clear order..biz information in the catalogue
ratiopacpro Overview... 0 Cabinets... 1 Y Desk-top cases Y Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 06800002 Subracks/ 19" chassis...
More informationINSTALLATION INSTRUCTIONS
door frames Engineered product systems INSTALLATION INSTRUCTIONS door frames MINIMALIST DOOR FRAME Fry Reglet Flush Door frames are designed for use with 3 5/8 studs with ½ drywall both sides (4 5/8 throat
More informationGEET Fuel Processor Plans
GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationRe-board Accessories
Re-board Accessories Plastic Screws Plastic screws specially developed for 16 mm Re-board, but works with most thicknesses. A special version comes with a loop for hanging (only available in transparent
More informationRooflight INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Rooflight These instructions should be used for: Installing Permanent Trickle Ventilation: Constructing & Waterproofing a Timber Upstand Curb: Installing & Waterproofing Proprietary
More informationLinear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
More informationPanel Carts refer Page 112. 136 Intex Price Guide All prices are exclusive of GST
Panel Carts refer Page 112 136 Intex Price Guide All prices are exclusive of GST Cradle outriggers easily adjust Fast action single stage winch with silent cam lock brake Unique tilting cradle for easy
More informationWren Kitchens Installation Tips... 3. Carefully check your kitchen delivery... 4. Measuring out and marking up... 5. Fitting the base cabinets...
tra 1 Index Wren Kitchens Installation Tips... 3 Carefully check your kitchen delivery... 4 Measuring out and marking up... 5 Fitting the base cabinets... 6 Fitting the corner cabinets... 7 The 972mm or
More informationCabinets 101: Configuring A Network Or Server Cabinet
Cabinets 101: Configuring A Network Or Server Cabinet North, South and Central America White Paper May 2012 www.commscope.com Contents Background Information 3 What is a network or server cabinet? 3 What
More informationLK Wallbox UNI Push. Assembly. Only intended for LK PE-X Universal Pipe X.
LK Wallbox UNI Push Only intended for LK PE-X Universal Pipe X. LK Wallbox UNI Push 16 Single Article no. 188 06 38 LK Wallbox UNI Push 20 Single Article no. 188 06 39 LK Distance template LK Wallbox UNI
More informationPreface nivtec.com 3
nivtec.com Preface nivtec.com 3 nivtec 4 nivtec.com Planning with an Eye for Details nivtec.com 5 prolight+sound 2012 6 nivtec.com Meeting Point Fair Booth nivtec.com 7 Our Preparations 8 nivtec.com Enable
More informationMorgue refrigeration unit
Morgue refrigeration unit The Morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site
More informationDIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS TheRTAStore.com STEP 1: CLEAR A WORK SPACE Place your RTA cabinet panels on a smooth, scratch resistant surface in a large, open area. (Some people like to
More informationElo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
More informationStair Parts Installation. Tricks
Stair Parts Installation Tips & Tricks Introduction Your DIY staircase guide Welcome to the Stairpart home installation guide. Your stairway is both a functional and focal point in your home, so keeping
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationFormwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co.
Tie Rod & Formwork s well as containing our comprehensive range of Formwork Tie Sytems; this section also covers our market leading Rapidobat Column Former. Exclusive also to Formwork Direct are innovations
More informationBEDFORD DORMOBILE PARTS LIST JUNE 2016
BEDFORD DORMOBILE PARTS LIST JUNE 2016 FOR UK AND EU REGION REPRODUCTION PARTS FOR YOUR ORIGINAL DORMOBILE BEDFORD CA AND CF CONVERSIONS DORMOBILE LIFTING ROOF PARTS BEDFORD CA & CF Roof vent cover (colour
More informationKnürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
More informationInstallation instructions, accessories - Handsfree for cellular phone, system B, entry level
XC90 Section Group Weight(Kg/Pounds) Year Month 3 39 0.5/1.1 2006 07 XC90 2003, XC90 2004 IMG-249663 Page 1 of 18 Required tools A0000162 A0000163 IMG-239664 M0000232 IMG-253123 IMG-252223 Page 2 of 18
More informationPower Cube Open Source Ecology Page 1. Power Cube. Version 4
Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete
More informationPackaged Terminal Air Conditioner Wall Sleeve Installation
Installation & Maintenance Data IM 1196 Group: PTAC Part Number: 910141799 Date: October 2013 Packaged Terminal Air Conditioner Installation x 42" PGAN with Top-Mounted Hydronic Heat Note: Installation
More informationInstallation instructions of the HEKI 3plus rooflight
Installation instructions of the HEKI 3plus rooflight before installing the HEKI 3plus rooflight, please read carefully the installation instructions. 1. Prerequisite for a correct installation of the
More informationRESERVDELSLISTA NORMFINISH DP14
1-A Glove L with lining 401100 1 pc 1-B Door L complete 400600 1 pc 1-C Main switch O-I 400101 1 pc 1-D START / STOP switch 400301 1 pc 1-E Fan motor 1,5 kw 400200 1 pc 1-F Gauge blast pressure 400400
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationSECTION 05 7360 ALUMINUM HANDRAIL AND RAILING SYSTEMS WITH DECORATIVE METAL PANEL INFILLS
1 SECTION 05 7360 ALUMINUM HANDRAIL AND RAILING SYSTEMS WITH DECORATIVE METAL PANEL INFILLS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and
More informationAir-Conditioning, Heating, and Refrigeration Institute. Sheet Metal and Air-Conditioning Contractors National Association
Air-Conditioning, Heating, and Refrigeration Institute Sheet Metal and Air-Conditioning Contractors National Association GUIDELINE B-1997 ACKNOWLEDGEMENT These guidelines for Roof Mounted Outdoor Air-
More informationModular Locomotive System Instruction Manual for HBK8 George Body Kit
Modular Locomotive System Instruction Manual for HBK8 George Body Kit Roundhouse Engineering Co. Ltd. Units 6-10 Churchill Business Park. Churchill Road, Wheatley. Doncaster. DN1 2TF. England. Tel. 01302
More information