The compact Intercom Server for small-sized solutions. The perfect server solution to get started with the analogue Intercom world 3 G15-TEL

Transcription

1 The compact Intercom Server for small-sized solutions Compact housing Audio + Functionality 4 upgrade possibility The perfect server solution to get started with the analogue Intercom world Cost-effective Intercom Server power in a compact format ideal as a stand-alone solution for small sized applications, including full support of 20 analogue 4-wire Intercom stations and modules. In a design that is compact enough for wall mounting, the Server offers proven Commend Intercom functionality, including integrated door / gate control and alarm functions, call forwarding to a telephone network by using a telephone interface, etc. Via licences, both the Intercom Server and expansion cards can easily be upgraded to a fully-featured Server, which offers additional and proven Intercom features, like the integration of digital and IP subscribers. Have a growing business? Your will grow with it. 1 Basic housing with five plug-in slots for up to 20 analogue subscribers. One AF input (for music or alarm), two inputs for floating contacts, two relay outputs, RS-232 and IP interface for (remote) programming or maintenance. The preinstalled Intercom server software enables the playback of pre-recorded audio as well as the indication of the current time and date. 2 G15-GET-4B DSP subscriber card for connection of up to four 4-wire analogue subscribers with feature level B. Up to five G15-GET-B cards can be used with a Intercom Server. Every single card provides an audio bandwidth of 16 khz and enables OpenDuplex conversations in 7 khz. 3 G15-TEL Multi-functional telephone interface for connecting the Intercom System to an analogue subscriber of a telephone system or directly to a standard telephone line. Telephone mode for direct dialing of the desired telephone number from an Intercom station. Auto Dialer mode with automatic dialing of freely programmable dialing sequences initiated by calls or call requests. Freely configurable speech storage for acoustic identification and messages ( waiting information) in dialer mode. DTMF telephones can operate functions in the Intercom system ( once a call has been received on a remote telephone, all after dial functions are available). 4 G15-8E8A Plug-in card with eight inputs for floating contacts and eight relay outputs (make, open or switch-over). Read in of five operation states with inputs (Idle, Active 1, Active 2, Short, Line break). DATASHEET DATENBLATT V1.0/0615 V Seite SA 1 16

2 Let your Intercom system grow with your company The new compact Intercom Server Many years of experience with the compact Intercom Servers GE 50 and GE 100 allowed the development of a new, compact, cost-effective and futureoriented Intercom Server. The combines all features, which are well known from previous compact servers, including the great benefit that this server can easily be upgraded to a full-fledged Intercom Server by software licences. Start your business today with the world of Commend our solutions grow with your needs. The new way to join the Intercom world of Commend The start with the compact Intercom Server offers following benefits: Inexpensive purchase and maintenance Proven and cost-effective analogue technology Up to 20 subscribers and 42 inputs and outputs available per Intercom Server Seamless integration with the telephone network Full support of all analogue Commend Intercom terminals Start system G15-8E8A G15-TEL G15-GET-4B Required licence upgrades L15-G3-8E8A L15-G3-TEL L15-G3-GET L15-GE300 Note: It is mandatory to upgrade every single component of the system! Advanced system G3-8E8A G3-TEL G3-GET-4B Need more Intercom power? Upgrade to a and enjoy the benefits of the advanced Commend Server class: Full support of all Intercom technologies (IP, digital, analogue) Digital networking over IP, 2-wire lines, E1 etc. Flexible upgrade options with various feature packages Easy integration of existing systems DATASHEET DATENBLATT V1.0/0615 V Seite SA 2 26

3 Technical Specifications Technical data Power supply: 24 VDC (±5%) Emergency power consumption: Power consumption: 200 mah (without cards) 30 W Distortion: < 0.9% Operating temperature range: Storage temperature range: Relative humidity: Dimensions of the housing (WxHxD): Weight including package: Mounting: Relay outputs: Music input: Digital inputs IN1, IN2: 0 C to +50 C (32 F to 122 F) 30 C to +60 C ( 22 F to 140 F) 20% to 80%, not condensing 310 x 210 x 85 mm (12.21 x 8.27 x 3.15 inch) approx. 1,650 g (3.64 lbs) wall mounting max. switching capacity: 60 W / 62.5 VA, max. switching current: 2 A max. switching voltage: 60 VDC / 40 VAC max. 800 mv rms at 10 kω, 16 khz for floating contacts, max. line resistance: 1.5 kω Features and highlights Compact polycarbonate housing suitable for wall mounting Easy installation and start-up More than 100 standard features Latest Intercom technology: microprocessor-controlled, high level of integration, object-oriented programming Integrated functions for door / gate control Flexible expansion with different feature packages Wide range of applications User-friendly configuration with PC software (included in extent of supply) Expansion Subscribers Outputs Inputs Basic expansion (digital) Maximum expansion (digital) Extent of supply Intercom Server Short reference Cable bearers, screws and dowels The types of differ in extent of supply: : without power supply unit EU: incl. 24 VDC power supply unit CA: incl. 24 VDC power supply unit with adapters for AUS, USA and UK System requirements Intercom Server software min. PRO Configuration software min. CCT DATASHEET DATENBLATT V1.0/0615 V Seite TE 1 16

4 Installation Instructions Precautions With regard to the electromagnetic compatibility, the Intercom Server is suitable for the following types of application: residential buildings, office and commercial premises, small businesses and industrial premises with public low-voltage mains supply. This is a Class A product. In a domestic environment, this product may cause radio interference. Defective power cables of the power supply may not be repaired or changed. In case of defective power cables, the whole power supply must be changed. Mounting and installation of the Intercom Server and of the equipment may be carried out by authorised service personnel only. Cards may be inserted or removed only with voltage switched off. Before exchanging of cards, ESD precautions must be observed. The terminal of the motherboard (see Cable run ) is used as grounding point for Wrist Strap Grounding. plug-in cards Subscriber card G15-GET-4B: Basic subscriber card for 4 analogue subscribers with feature level B W 60 mm (2.36 inch), H 160 mm (6.3 inch), D 20 mm (0.79 inch) 198 g (0.4 lbs) Telephone interface card G15-TEL Connection via RJ11 telephone socket. W 60 mm (2.36 inch), H 160 mm (6.3 inch), D 20 mm (0.79 inch) 350 g (0.76 lbs) Input / output card G15-8E8A: Connection for 8 outputs and 8 inputs via plugable screw terminals. W 167 mm (6.57 inch), H 100 mm (3.94 inch), D 20 mm (0.79 inch) 185 g (0.37 lbs) Configuration via IP The Intercom Servers are automatically recognised in local networks by CCT 800 for configuration (reachable via layer 2). Configuration via RS-232 For configuration of the, a 9-way D-Submin connection cable is required (1:1, plug on server side, socket on PC side): NC 1 1 TXD 2 2 RXD 3 3 NC 4 4 GND 5 5 NC 6 6 NC 7 7 NC 8 8 NC 9 9 (9-way D-Submin plug) (9-way D-submin jack) PC NC = not connected This cable can be purchased at an electric outfitter or ordered with the type X-KAB-CCT. upgrade licences Intercom Server upgrade licence L15-GE300: Licence for one upgrade from a to a Upgrade licence for a subscriber card L15-G3-GET: Licence for one upgrade from a G15-GET card to a G3-GET card Upgrade licence for a telephone interface card L15-G3-TEL: Licence for one upgrade from a G15-TEL card to a G3-TEL card Upgrade licence for an input/output card L15-G3-8E8A: Licence for one upgrade from a G15-8E8A card to a G3-8E8A card DATASHEET DATENBLATT V1.0/0615 V Seite IN 1 16

5 OBSERVE PRECAUTIONS FOR HANDLING OF ELECTROSTATIC SENSITIVE DEVICES! Achtung: Darf nur durch geschultes Personal geöffnet werden Attention: May only be opened by qualified persons! Attention: Seul ie personnel qualife est autorise a l ouvrir! Attentie: Mag alleen geopend worden door gekwalificeerd personeel! Attenzione: Darf nur durch geschultes Personal geöffnet werden Atencion: Darf nur durch geschultes Personal geöffnet werden Security and Communication Connection diagram Music / Alarm input Expansion plug IP Slot number Status LED G15-8E8A G15-GET-4B G15-GET-4B G15-GET-4B G15-TEL M3 +24V Power ON OFF Inputs for floating contacts MUSIC IN1 IN2 RS232 OUT1 OUT2 A B C D A B C D OUT1 OUT2 Floating outputs (relays) Mounting, dimensions Measuring units in mm (inch), not scale! 306 (12.1) 290 (11.4) * * 180 (7.1) 206 (8.1) Attention * Protection against contact acc. to IEC/EN : For installation in the operator access area, the housing cover has to be screwed onto the housing. DATASHEET DATENBLATT V1.0/0615 V Seite IN 2 26

6 Cable run M3 Grounding point for wrist strap grounding +24V Cable bearer min. 120 mm (4.7 inch) A B C D Cable bearer 4 / Cable clamp NAK cm (55.1 inch) Analogue RJ11/RJ45-Socket Quality tested. Reliable. Smart. COMMEND products are developed and manufactured by Commend International in Salzburg, Austria. A strong worldwide network COMMEND is represented the world over by local Commend Partners and helps to improve security and communication with tailored Intercom solutions. The development and manufacturing processes are certified in accordance with EN ISO 9001:2008. The technical data contained herein has been provided solely for informational purposes and is not legally binding. Subject to change, technical or otherwise. IoIP, OpenDuplex and Commend are trademarks registered by Commend International GmbH. All other brands or product names are trademarks or registered trademarks of the respective owner and have not been specifically earmarked. ALGERIA AUSTRALIA AUSTRIA BELGIUM BRAZIL CANADA CHINA CROATIA CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY HUNGARY ICELAND INDIA IRELAND ITALY LIECHTENSTEIN LUXEMBURG MALAYSIA MIDDLE EAST MOROCCO NETHERLANDS NEW ZEALAND NORWAY POLAND PORTUGAL RUSSIA SERBIA SINGAPORE SLOVAKIA SLOVENIA SPAIN SOUTH AFRICA SWEDEN SWITZERLAND TUNISIA TURKEY UNITED KINGDOM USA DATASHEET DATENBLATT V1.0/0615 V Seite IN 3 36