Working Scaffold LAB 130. Contents. Ref. No. Description / Application Product m² List kg
|
|
|
- Julian Bell
- 7 years ago
- Views:
Transcription
1 Ref. No. Description / Application Product m² List kg This product list includes all parts necessary for most applications. For parts required for special applications, please refer to the MEVA price list. Dimensions are in centimetres (cm) unless another measure is shown. Contents Board holder 48 LAB...58 Bracket connection LAB...61 Bracket extension LAB...59 Combi ledger LAB...61 Compensation platform LAB 130/ Corner platform LAB Corner support LAB...61 Coupling pin 48 LAB...58 Extension for guard-railing LAB...57 Formwork connector head LAB...63 Guard-railing post 48/100 LAB...57 Height adjustment 60/100 LAB...60 LAB suspension for prefab parts...65 Pin...62 Pin connector LAB...59 Pressure rod LAB...60 Railing 140 LAB...56 Railing for corner platform LAB...55 Scaffold tube 110 LAB...62 Screw LAB...63 Side railing LAB...58 Single scaffolding bracket LAB...56 Sleeve for LAB suspension for prefab parts...65 Sleeve LAB...63 Suspension loop Suspension rail LAB...65 Suspension shoe LAB...63 Suspension tube 150 LAB...64 Transport spreader LAB...62 Tube suspension shoe LAB...64 Uni-platform LAB 130/ Working platform LAB LAB 53
2 Working platform LAB 130 Galvanized. Guard-railings and brackets are made of tubes Ø 48.3 mm. The guardrailing is equipped with a protective steel mesh (mesh width 100 x 100 mm). The platform is covered with non-slipping aluminium on a hot-dip galvanized steel frame construction. Stacking height 30 cm. Admissible load capacity 3 kn/ m² (300 kg/m²) according to DIN 4420, scaffolding group Working platform LAB 130/ Working platform LAB 130/ (200) 335 (235) The numbers in parentheses refer to the Working platform LAB 130/240 Compensation platform LAB 130/240 Galvanized. Is primarily used for length adjustment up to 2.00 m. The compensation platform is attached to the adjacent platforms with 2 integrated reversible couplings and thus secured against uplift and shifting. Admissible load capacity 2 kn (200 kg/m²) according to DIN 4420, scaffolding group Compensation platform LAB 130/ LAB 54
3 Corner platform LAB 130 Galvanized. Crescent-shaped platform without guard-railing for outside corners between 70 and 180. The guard-railings must be ordered separately and need to be attached to the corner platform before use. The corner platform is secured against uplift and shifting by attaching the integrated couplers to the adjacent platforms. Admissibile load capacity 3 kn/ m² (300 kg/m²) according to DIN 4420, scaffolding group Corner platform LAB 130 (without railing) Railing for corner platform LAB Galvanized. Each corner platform requires 3 guard-railings which are self-securing when assembled. The railings are connected to each other with integrated couplings. When using a pin connector LAB, this railing can also be used as railing extension Railing for corner platform LAB Uni-platform LAB 130/140 Galvanized. Versatile supplement to the working platform LAB 130. Can be applied as inner corner, as working platform with a length of 1.40 m (plus railing 140) or as compensation platform up to 1.00 m. Four connectors for 2 single scaffolding brackets are integrated (incl. 4 pins 16/120) Uni-platform LAB 130/ LAB 55
4 Railing 140 LAB Galvanized. Pluggable railing for Uni-platform LAB 130/140 when used as working platform with a length of 1.40 m or as compensation platform. Also serves as railing extension Railing 140 LAB Single scaffolding bracket LAB Galvanized. Can be used as a single bracket beneath corner platforms when applied in acute-angled corners, beneath compensation platforms or Uni-platforms. When used as a single bracket, a guard-railing post 48/100 LAB is also required Single scaffolding bracket LAB LAB 56
5 Guard-railing post 48/100 LAB Galvanized. Is used with single scaffolding brackets LAB and suited as railing extension for all types of guardrailing Guard-railing post 48/100 LAB Extension for guard-railing LAB Galvanized. With protective steel mesh (mesh width 100 x 100 mm). Extends the guard-railing by 1.00 m Extension for guard-railing LAB Extension for guard-railing LAB verstellbar (224) Ø 4 Ø The numbers in parentheses refer to the Extension for guard-railing LAB 240 LAB 57
6 Side railing LAB Galvanized. With integrated protective steel mesh (width 100 x 100 mm). Side protection for working platform LAB. Is provided with an integrated coupling, a limit stop and a clamping device Side railing LAB Board holder 48 LAB Galvanized. Permits railing boards and toe boards to be attached at any position of the railings and brackets Board holder 48 LAB Coupling pin 48 LAB Galvanized. Is used to attach a scaffold tube to a railing post, e.g. when using protection nets. Can be attached to the guard-railing post 48/100 LAB with a pin 14/ Coupling pin 48 LAB Ø LAB 58
7 Pin connector LAB Galvanized. Connects corner railings LAB to each other for height extension. The railings of a level must be connected to each other Pin connector LAB Ø 4 Bracket extension LAB Galvanized. Is used to bridge wall openings and allows platforms to be positioned about 1.30 m higher. Is provided with a pin 16/20 and a spacer. When bridging wall openings higher than 2.50 m, pressure rods LAB are also required Bracket extension LAB LAB 59
8 Pressure rod LAB Galvanized. Is used together with the bracket extension when bridging wall openings higher than 2.50 m. Delivery includes 2 pins 16/ Pressure rod LAB Height adjustment 60/100 LAB Galvanized. Permits lowering of LAB 130 platforms beneath eaves by 60 cm or 100 cm. The height adjustment is secured to the platform with a pin 16/80 (included in the delivery) before flying the platforms Height adjustment 60/100 LAB LAB 60
9 Combi ledger LAB Galvanized. Nailable ledger for single scaffolding bracket LAB to mount job-built planking or to adjust height if the compensation platform is provided with a bracket only on one side Combi ledger LAB Bracket connection LAB Galvanized. Is used to fasten a single scaffolding bracket LAB to the corner platform LAB in acute-angled corners. The single scaffolding bracket acts like a pressure rod. Delivery includes 2 pins 16/80. A corner support LAB is also required Bracket connection LAB Corner support LAB Galvanized. Turns the single scaffolding bracket LAB into a corner bracket. Delivery includes 2 pins 12/80 with cotter pins Corner support LAB LAB 61
10 Scaffold tube 110 LAB Galvanized. Supplement for Uni-platform LAB 130/140 in combination with single scaffolding brackets LAB. Is used to brace the single brackets when the Uni-platform is lifted Scaffold tube 110 LAB Ø Transport spreader LAB Galvanized, foldable. Max. load capacity 10 kn (1 ton). Is used to move working platforms LAB 130 beneath the eaves. For use and safety check see the transport spreader Safety Instructions Transport spreader LAB Pin Galvanized, Ø 16 mm. Self-locking through tilting end. Is used to secure various accessories (pin is integrated) of the working platform LAB Pin 16/ Pin 16/ LAB 62
11 Formwork connector head LAB Not shown. Galvanized. Is required when using working scaffolds LAB as pouring platforms Formwork connector head LAB Suspension shoe LAB Galvanized. Provides a safe suspension point together with a sleeve LAB and a screw LAB Suspension shoe LAB Ø Sleeve LAB Built-in sleeve with DW thread Ø 26.5 mm, length 27 cm. Enables the installation of the suspension shoe LAB. A screw LAB is also required Sleeve LAB Screw LAB Galvanized. DW thread Is used to screw the suspension shoe LAB into the sleeve. Length of thread 25 cm. SW Screw LAB LAB 63
12 Suspension loop 10 Uncoated. Is used to suspend platforms. Loop Ø 10 mm Suspension loop Tube suspension shoe LAB Galvanized. Together with sleeve LAB and screw LAB it provides a safe suspension point for the suspension tube 150 LAB Tube suspension shoe Suspension tube 150 LAB Galvanized. Is hooked into 2 tube suspension shoes LAB and permits the suspension of the working platform LAB at the joint of two platforms. The tube length of 1.50 m does not require an exact fitting of the anchoring points Suspension tube 150 LAB Ø Ø 8.5 LAB 64
13 LAB suspension for prefab parts Galvanized. Is used to suspend the working platform LAB 130 to prefabricated walls. Admissible load 2 kn/ m² (200 kg/ m²) when used with LAB 130/ LAB suspension for prefab parts Ø 7 4 Sleeve for LAB suspension for prefab parts Cast-in plastic part (lost). Is required for each application of the LAB suspension for prefab parts Sleeve for LAB suspension for prefab parts (compl.) Ø Ø Ø 4.2 Suspension rail LAB Galvanized. Is used to suspend and attach LAB or KAB platforms after pouring the wall or slab. If the wall contains a thermal insulation layer, the suspension can only be attached if the layer is not thicker than 20 cm. Suspension rail is attached with two diagonally positioned dowels (Fischer FZA 14x60 M8i or equivalent). Dowels must be ordered separately Suspension rail LAB LAB 65
14 Notes LAB 66
15 Notes LAB 67
16 Headquarters (Germany) Logistic Centers International Sales & Service MEVA Schalungs-Systeme GmbH Industriestraße 5 D Haiterbach Tel Fax info@meva.de A-Pfaffstätten, Tel D-Berlin, Tel D-Haiterbach, Tel D-Hannover, Tel H-Budapest, Tel UAE Dubai, Tel USA-Springfield, Tel A-Pfaffstätten, Tel AUS-Adelaide, Tel B-Kruibeke, Tel CDN-Toronto, Tel CH Seon, Tel CO-Bogotá, Tel F Sarreguemines, Tel GB Tamworth, Tel H Budapest, Tel HR-Bestovje, Tel IND-Mumbai, Tel LT-Kaunas, Tel MAL-Perak, Tel N-Oslo, Tel NL Gouda, Tel PA-Panama City PL-Bialystok, Tel RUS Moskva, Tel SGP-Singapore, Tel SLO-Petrovce, Tel UAE Dubai, Tel USA Springfield, Tel
BRIO Modular scaffolding
BRIO Modular scaffolding // Versatile and multifunctional // Table of content Features Benefits Solutions Basic components 2 4 6 11 // Features BRIO Modular Scaffolding covers the different configurations
Layher. Protective Systems. More Possibilities. The Scaffolding System. Layher Keder Roof and Keder Hall Instructions for Assembly and Use
Layher Keder Roof and Keder Hall Instructions for Assembly and Use Quality management certified according to DIN EN ISO 9001:2000 by German TÜV-CERT Protective Systems Layher More Possibilities. The Scaffolding
FRACASSO SCAFFOLDING PS 720
FRACASSO SCAFFOLDING PS 720 Characteristics Geometry Strengths PS 720 was designed and constructed in keeping with European regulations EN12810 and EN12811. 150 mm pin obtained by tapering the upright
SCAFFOLDING PRODUCT TECHNICAL GUIDE. Scaffold Couplers General Technical and Application Manual. Genuine Safety. Outstanding Service.
SCAFFOLDING PRODUCT TECHNICAL GUIDE Scaffold Couplers Genuine Safety. Outstanding Service. Introduction Scaffold couplers are essentially the fundamental component that is used to assemble tube-and-coupler
UNIVERSAL RAILING, STEEL
RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL
MAXIMO The panel formwork with the MX Tie which is installed from one side only
MAXIMO The panel formwork with the MX Tie which is installed from one side only The PERI MX Tie Edition 02/2010 PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49
Fixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
Bolt-on castor set B
12/2010 Original Operating Instructions 999285502 en-gb Please retain for future reference Bolt-on castor set B rt. n 586168000 2008 models onward Basic drawings of product Product description The Bolt-on
Since it was established in 1989, with a small manufacturing base in Qwa Qwa and a hire yard in Botswana, Uni-Span
formwork formwork Since it was established in 1989, with a small manufacturing base in Qwa Qwa and a hire yard in Botswana, Uni-Span has grown to become one of the major players in the scaffolding and
WOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear
1 Schedule drawing 1.1 Schedule drawing, WOLFF 6023.6clear [X] max. hook height above ground Data WOLFF 6023.6clear Item Crane type Design Type of setup Basis of calculation Payload torque Hoist winch
Naval construction systems english chinese
Naval construction systems english chinese Marcegaglia 1 International certifications SCAFFOLDING: PREFABRICATED FRAMES CNAS - MCC Test reports no. TC-JG1- Q-2009-08; 15; 16; 17; 18. MARQUE NF Equipements
Product Catalogue HW-B150H
Product Catalogue Content 1 Coverage and Terminology... 4 1.1 Design Standards... 4 1.2 Load Criteria... 5 1.3 Definition of Terms... 6 1.3.1 Flood Barrier... 6 1.3.2 Flood Height, effective Flood Height,
HDA -----------------------------------------------------------
----------------------------------------------------------- Lightstrips ---------------------------------------------------------------------- Ceiling system for heating and cooling LIGHTSTRIPS LIGHTSTRIPS
Installation information. METTLER TOLEDO MultiRange DW150 / DW150T wall scale
Installation information METTLER TOLEDO MultiRange DW150 / DW150T wall scale DW150 / DW150T wall scale Contents Contents Page 1. Installation... 2 1.1 Preparatory work... 2 1.2 Installing the wall plates
Installation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
valid as of 1 April 2014 Fradiflex metal water stop
FRANK Product List valid as of 1 April 2014 Fradiflex metal water stop Fradiflex metal water stop Stremafl ex Controlled crack component Sealing of joints in concrete structures requires a very reliable
TRIO 330 The framed panel formwork for heights of up to 3.30 m
TRIO 330 The framed panel formwork for heights of up to 3.30 m product range 4.30 3.30 2 ties up to 3.30 m TRIO 330 The framed panel formwork for floor heights up to 3.30 m TRIO 330 is an independent formwork
Söll GlideLoc Aluminium Ladders. Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073
Söll GlideLoc Aluminium Ladders Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073 7 Söll GlideLoc Aluminium ladders Y-spar Profile 52 x 51 mm With connector Mounting
GUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
Knürr Miracel. Knürr Miracel. 19 Network and Server Rack Platform 1.12 to 1.22 1.11
Knürr Miracel 19 Network and Server Rack Platform 1.12 to 1.22 1.11 19" Server Rack: Knürr Miracel Strong points 1.13 Knürr Miracel ASP ASP/Server Rack 1.16 Knürr Miracel Server Rack 1.18 Knürr Miracel
Chapter 10 - Scaffolding Systems
Chapter 10 - Scaffolding Systems Contents Chapter 10 - Scaffolding Systems... 10-1 Check and Oil the Pump Jacks... 10-4 Set Pump Jack Brackets... Error! Bookmark not defined. Set Pump Jack Poles... 10-5
7. PRINCIPAL STEPS 8. POTENTIAL HAZARDS 9. RECOMMENDED CONTROLS
ACTIVITY HAZARD ANALYSIS (AHA) 1. Contract Number: 2. Contractor Name: 3. Date prepared: 4. Title/Activity Performed: FIXED SCAFFOLDING 5. Location: 6. Estimated Date of Completion: 7. PRINCIPAL STEPS
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
6720616592.00-1.SD. Flat roof. Rack Mounting. Installation instructions 6 720 647 036 (2010/11) AU
6720616592.00-1.SD Flat roof Rack Mounting AU Installation instructions 2 Contents AU Contents 1 Key to symbols and safety instructions....... 3 1.1 Explanation of symbols................ 3 1.2 Safety
Pipe Clamps and Accessories
Products 4.0 Products 4.1 Connection options to pipe clamps with Triple-Thread Connector NT 3G (M16, M10, M8) 4.2 Connection options to pipe clamps with Triple-Thread Connector NT 3G (3/8", M12, M10) 4.3
HORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
1 Introduction - Advice... 2. 2 Conductor Rails... 3. 3 Track Coupler... 4. 4 Power feeds... 5. 5 Air Gap Insulation Section... 6
Contents 1 Introduction - Advice... 2 2 Conductor Rails... 3 3 Track Coupler... 4 4 Power feeds... 5 5 Air Gap Insulation Section... 6 6 Expansion joints... 7 7 Anchor Caps... 8 8 End Caps (Distance between
Installation information. METTLER TOLEDO MultiRange Floor scales / Pit scales
Installation information METTLER TOLEDO MultiRange Floor scales / Pit scales KC300/KCS300 KC600/KCS600 KD600/KD1500 KE1500/KE3000 KES1500/KES3000 KG3000/KG6000 KN1500 Floor scales / Pit scales Contents
lindab duct suspension & support system Duct suspensions & Support systems
lindab duct suspension & support Duct suspensions & Support s lindab duct suspension & support Content Duct suspensions & Support s Duct suspension Duct suspension FB... DRSN... 0 DRSNR... 0 Channels and
Òàëðåïû, çàêðûòîãî òèïà Turnbuckles, closed type B 1 - B 5
Òàëðåïû, çàêðûòîãî òèïà Turnbuckles, closed type B 1 - B 5 B 1 Hook - hook B 2 Hook - jaw B 3 Jaw - jaw B 4 Hook - spacer B 5 Handwheel B 1 B 2 B 3 / / / 18,0 18,0 18,0 min-max () 950-1350 950-1350 950-1350
How To Build A Fastscaf Decking Decking Frame
Layher SpeedyScaf System Technical Brochure The standard system for scaffolding construction Made of hot-dip-galvanised steel or aluminium General construction approvals Z-8.1-16.2, Z-8.1-840 and Z-8.1-844
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
Residential Deck Safety, Construction, and Repair
Juneau Permit Center, 4 th Floor Marine View Center, (907)586-0770 This handout is designed to help you build your deck to comply with the 2006 International Residential Building code as modified by the
OVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers
Now available with full IP65 rating: Protection from dust and water jets NEW: K470 Plus covered containers Universal container K 470 the original since 1950 Often copied but never equalled or bettered
MultiPost-AP anchorage device
MultiPost-AP anchorage device MultiPost anchorage point Type 1 Fixing on reinforced concrete with large, 360 rotating stainless steel lifting eye for the simultaneous securing of max. 2 persons. This can
mechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
Knürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
Operating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
MOVIEtube CR. Cinematography Rig. Setup Camera Sony PDW-F3 (MTCR-P-10-01) Version 03-2011 / English
MOVIEtube CR Cinematography Rig (MTCR-P-10-01) Setup Camera Sony PDW-F3 Version 03-2011 / English Step by step assembly instruction 1) The MOVIEtube CR (MTCR-P-10-01) is supplied as shown in the picture
JP Tribander Owner Manual
JP Tribander Owner Manual JP-Tribander Technical overview JP-Tribander is effective tribander beam for 20m, 15m and 10meters with full size elements without traps. Antenna is designed using latest computer
Preface nivtec.com 3
nivtec.com Preface nivtec.com 3 nivtec 4 nivtec.com Planning with an Eye for Details nivtec.com 5 prolight+sound 2012 6 nivtec.com Meeting Point Fair Booth nivtec.com 7 Our Preparations 8 nivtec.com Enable
Description. Outlets Page 62. Contact foil Page 65. Accessories Page 65. Outlets Page 68. Accessories Page 69. Brackets Page 73.
Pluvia Syphonic roof rainage system Description Outlets Page 62 Pluvia outlets 12 l Contact foil Page 65 Accessories Page 65 Pluvia outlets 25 l Outlets Page 68 Accessories Page 69 Pluvia outlets 45/60/100
ASSEMBLY INSTRUCTIONS Residential Roof solutions
ASSEMBLY INSTRUCTIONS Residential Roof solutions CROSSRAIL System USA Table of contents TABLE OF CONTENTS THE COMPANY SAFETY REGULATIONS MATERIALS REQUIRED TOOLS REQUIRED ASSEMBLY TERMS AND CONDITIONS
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
Stair Towers Public Stair Towers Universal System Scaffold Loading Towers 750 Temporary Roofs and Containment
U K S Y S T E M S C A F F O L D Stair Towers Public Stair Towers Universal System Scaffold Loading Towers 750 Temporary Roofs and Containment Why you should use UK System Scaffold Hire UK SYSTEM SCAFFOLD
TELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
Huwilift DUO, Huwilift DUO Forte Seite 4 3. Huwilift MAXI. Huwilift MAXI UP. Huwilift Senso, Huwilift E-Senso Page 4 17
INDEX Lifters Huwilift DUO, Huwilift DUO Forte Seite 4 3 Classic solution for lift-up flaps. Huwilift MAXI Page 4 7 Quickly installed for a gentle lift. Huwilift MAXI UP Page 4 13 Lifts and lowers chest
soil and rock 1.3 soil penetrometers 1.3.1 soil penetrometers page 96
soil and rock 1.3 soil penetrometers 1.3.1 soil penetrometers page 96 96 1.3.1 soil penetrometers tecnotest tecnotest s range of penetrometers Tecnotest manufactures a complete range of static, dynamic
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
Dear costumers, You have just received our new catalogue with KOPOS KOLIN a.s. offer of metal cable support system products. Those types of products
Dear costumers, You have just received our new catalogue with KOPOS KOLIN a.s. offer of metal cable support system products. Those types of products were firstly introduced on the market in year 2007.
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
User Manual Swifty Rehabilitation Buggy. Thomashilfen. Kinder- Reha
User Manual Swifty Rehabilitation Buggy Thomashilfen Kinder- Reha Dear Swifty user, the Swifty rehabilitation buggy is a modern, high-quality medical product with an attractive design. We have made a point
00MK-MA0190-EN00. Mounting System ASSEMBLY INSTRUCTIONS. Universal Light system with locking brackets, for sloped roof
00MK-MA0190-EN00 Mounting System ASSEMBLY INSTRUCTIONS Universal Light system with locking brackets, for sloped roof Rev.02 November 2014 Table of contents General instructions 2 General safety instructions
Agila Ceiling Supply Unit Medical Supply Units
Agila Ceiling Supply Unit Medical Supply Units Featuring a wide range of configurations and options to choose from, the compact and highly ergonomic Dräger Agila family uses a minimum of precious care
S4 - Top Hung Window. Outside view. Inside view. Interior frame. Exterior frame. Glazing Panel
S4 - Top Hung Window Outside view Inside view Interior frame Exterior frame Glazing Panel Dometic Seitz GmbH 1 S4-Top Hung Window.doc Exterior frame End cap Sealing rubber between exterior frame and wall
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL Check out our Affordable Selection of DIY Pole Barn kit sizes and prices below. We offer a complete DIY pole barn kit plus independent experienced
Remote Head REMO ONE. Code 5750. Manual
Remote Head REMO ONE Code 5750 Manual by sachtler. All rights reserved Version: 1.2/09/05 Issue date: September 2005 Order no.: srh20t010a We want you to receive Sachtler products that are always state
DRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4
DRUM ROLLER Suitable for drums up to 200 liter capacity Made from fire-galvanized sheet steel ø 610 mm, with 4 polyamide swiveling castors ø 75 mm Model FAR-1: closed version with welded leak-proof base,
FAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
Auxiliary Rams USERS MANUAL
Auxiliary Rams 2007 Chief Automotive Technologies, Inc. Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one
MERO Floor Systems - CleanRoom
MERO Floor Systems - CleanRoom Innovative solutions out of one hand Development Access floor Consulting Hollow floor Planning Floor covering and Manufacturing Installation Installation Services Floor systems
50AI01oe 02/15. Labko GRP cesspools. Instructions for installation, operation and maintenance
02/15 Labko GRP cesspools Instructions for installation, operation and maintenance Reliable solutions Wastewater treatment systems Contents 1 LABKO CESSPOOLS... 3 1.1 GENERAL... 3 1.2 IMPORTANT TO KNOW
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before
Fixed ladders. Fixed ladders. Shaft ladders
Fixed ladders Fixed ladders Fixed ladders are perfect to provide safe and permanent access to buildings, equipment or machines also at great heights, e.g.: + + Ascent for inspection and maintenance work
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12 14tel: 061307-3801. E-mail:pzoli@kiralytrading.hu agi@kiralytrading.hu. Hinges
355 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e. when
Geberit Pluvia. Syphonic roof drainage system. Overview Page 42. Geberit Pluvia outlets 6 l. Geberit Pluvia outlets 14 l
Geberit Pluvia Syphonic roof rainage system Description Overview Page 42 Geberit Pluvia outlets 6 l Outlets Page 43 Contact foil Page 43 Outlets Page 44 Geberit Pluvia outlets 14 l eating element Page
Modular Access Floor for Data Center. From Rack to Row to Room to Building
Modular Access Floor for Data Center From Rack to Row to Room to Building Why using Scneider Electric modular access floor in Data Centers The evolution of modern Data Centers emphasizes specific exigencies
Isover HVAC Application Handbook Installing fire protection insulation to metal ductwork
Isover HVAC Application Handbook Installing fire protection insulation to metal ductwork HVAC - Fire protection of metal ductwork Fire protection Thermal insulation Isover ULTIMATE TM Protect - Fire protection
ENAiKOON ultrasonic fuel-level sensor
ultrasonic fuel-level sensor Product Summary The ultrasonic fuel-level sensor is the perfect solution for monitoring the fuel level and fuel consumption of trucks, boats, construction equipment, generators,
Data Sheet VITOSOL 100. Flat collectors for the utilisation of solar energy. Vitosol 100. Part nos. and prices: see price list
VITOSOL 100 Flat collectors for the utilisation of solar energy Data Sheet Part nos. and prices: see price list File in: Vitotec 1 Manual, Index 16 Vitosol 100 Type s 1.7 Vitosol 100 Type s 2.5 Vitosol
Worldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers
Fluxa Area floodlights for high pressure discharge lamps and LEDs
Fluxa Area floodlights for high pressure discharge lamps and s Fluxa is a series of area floodlights with symmetrical or wide beam reflectors. There are 4 sizes for high pressure discharge lamps or with
PUMP JACK SYSTEM AND ACCESSORIES
Pump Jack Model # 2200 A low cost, easy to operate, safe, portable scaffolding built of rugged steel. It's perfect for shingling, siding, sheathing, insulating, painting, building, roofing, home repair
lindab duct suspension & support system Duct suspensions & Support systems
lindab duct suspension & support system Duct suspensions & Support systems lindab duct suspension & support system Content Duct suspensions & Support systems Duct suspension Threaded rod OSB 0... Channels
Removable Aluminium posts
Post Solent Sail Shades Ltd 120 Billington Gardens Hedge End Southampton SO30 2RT Tel/Fax: 01489 788243 www.solentsailshades.co.uk Email: info@solentsailshades.co.uk Removable Aluminium posts Single Pole
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
Functional Purism. Excellent Line offers the perfect balance between purist design and functional technology for first-class atmosphere.
Functional Purism Functional Purism Excellent Line offers the perfect balance between purist design and functional technology for first-class atmosphere. 06 / D Line 20 / S Line 36 / P Line 48 / Drop Line
Installation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
DEHN + SÖHNE. DEHNconductor System No Problems with Proximities
DEHN + SÖHNE DEHNconductor System No Problems with Proximities DEHNconductor System - New Possibilities for controling Proximities. For preventing dangerous flashovers among parts of external lightning
12.1 Schlüter -KERDI-BOARD
I n n o v a t i v e p r o f i l e s 12.1 Schlüter -KERDI-BOARD S u b s t r a t e U N I V E R S A L S T R U C T U R A L P A N E L, B O N D E D W A T E R P R O O F I N G Application and Function Schlüter
Rack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
Price list Valid from April 2012
Price list Valid from April 2012 Page Ceramic infrared emitters 2-14 FIS 2 FSF series 2-3 FSL series 3 FSM series (MaxLife) 3-4 FSR series 4-5 HFS series 5-6 HLF 6 HLF/S 6 HLS series 6-7 HSR series (Quick
PRODUCT BROCHURE. RMD Kwikform United Kingdom. Superslim
RMD Kwikform United Kingdom Superslim Product Overview The Superslim soldier is the definitive formwork primary beam. Robust and easily assembled into beams of almost any length, the Superslim soldier
PRODUCT DATA SHEET T-LIFT DESK
T-LIFT DESK The height-adjustable desk allows you to alternate at work between sitting and standing. Formally minimalist; visually and technically based on the T-Platform. To be used for desk-sharing applications
OIL SPILL CONTAINMENT CONTAINERS AND RACKING
www.lubecontrol.com.au OIL SPILL CONTAINMENT CONTAINERS AND RACKING Lube Control Pty Ltd Providing lubrication solutions! Unit 5/53 Norfolk Rd, Marion, SA 5043 t: (08) 8298 5563 f: (08) 8298 6253 e: info@lubecontrol.com.au
PUBLIC VERTICAL PLATFORM LIFT PLANNING GUIDE
Multilift PUBLIC VERTICAL PLATFORM LIFT PLANNING GUIDE Applicable Codes: ASME A17.1 ASME A18.1 CSA B613 CSA B355-09 19-m01-2015 Part No. 000790 Copyright 2015 Savaria Corporation All rights reserved. Printed
Temperature Sensors. Accessories. for Injection Molding. Types 6192B, 6193B,
Accessories Temperature Sensors for Injection Molding Types 6192B, 6193B, 6194B, 6195B Temperature sensors for measuring the contact temperature directly in the cavity at the surface of the solidified
Accessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
ONTRAC WIRE MESH CABLE TRAY SYSTEM
P R O D U C T D ATA S H E E T ONTRAC WIRE MESH CABLE TRAY SYSTEM K E Y F E AT U R E S Available in two styles: Shaped and Standard Tray Easy to use pathway solution that supports large quantities of network
Discussion on Products under the Scope of EN 1090-1 and proposed CEN/TR to clarify the scope
CEN/TC 135 N 686 European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung CEN/TC 135 Execution of steel structures and aluminium structures N 686 Secretariat:
AMF Line; wall absorbers Wall mounted acoustic designs PERFORMANCE CEILINGS. M ore s c op e f or i n n ovat i on MADE IN GERMANY
PERFORMANCE CEILINGS M ore s c op e f or i n n ovat i on AMF Line; wall absorbers Wall mounted acoustic designs MADE IN GERMANY 138568_Prospekt Wandabsorber_GB int.indd 1 Acoustic elements on the wall
DCSO244 : 001 - GENERAL VIEW [1/9]
![DCSO244 : 001 - GENERAL VIEW [1/9]](/thumbs/40/20153364.jpg "DCSO244 : 001 - GENERAL VIEW [1/9]")
DCSO244 : 001 - GENERAL VIEW [1/9] Page 1 of 18 DCSO244 : 001 - GENERAL VIEW [1/9] Ref # Part Number Qty. Description 1 001651-000 LATERAL HOLDER K2.9499 1A 000819-000 FASTENING SCREW SET,ZN PL LIGHT-COLORED
Feed-through terminal block - SSK 110 KER-EX - 0502058
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
Security steel door dw 52-1 Teckentrup DF WK 2 optionally with glazing/ventilation grille
Security steel door dw 52-1 Teckentrup DF WK 2 optionally with glazing/ventilation grille Text example Compile and tender according to requirements. Please refer to technical data below for respective
3D Work- and Welding Table D28. Innovative technology improved. Englisch English Version 7.0. Award winning design. D 28 ProfiLine
Englisch English Version 7.0 D28 ProfiLine meets the requirements of high-quality suppliers D 28 ProfiLine 3D Work- and Welding Table D28 Award winning design D28 ProfiLine meets the requirements of high-quality
Ref: GA13UK Glass Awning Support System
Ref: GA13UK Glass Awning Support System Give any entrance an uncomplicated, graceful look, enhancing the design of any building. Installation LAMINATED TOUGHENED GLASS High grade 316 stainless steel for
3. Geberit Pluvia Roof Drainage Systems
3. Geberit Pluvia Roof Drainage Systems Assortment overview: Pluvia Outlets...52 3.1 Roof outlets... 53 3.1.1 Roof outlets up to 25 l/s...53 3.1.2 Roof outlets up to 100 l/s...55 3.2 Roof outlets for gutters...