KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12 14tel: Hinges
|
|
|
- Georgiana Franklin
- 8 years ago
- Views:
Transcription
1 355
2 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e. when combining aluminium profiles with different slot widths. Guide tabs Many hinges can be supplied on request with guide tabs for the slots of aluminium profiles. They secure the hinge against twisting and make it stronger. The hinges are designed in such a way that the guide tabs can simply be broken out with a screwdriver. By the way, hinges are supplied with a stainless steel axle as standard. K0436 and K0442 are supplied with a steel axle. without locating tabs Left and right hinge Each lift-off hinge has a left and right version, before ordering it should be known on which side the door or hatch is to be mounted. Left hinge. The left hinge half is fixed. The hatch or door opens from right to left. with locating tabs for aluminium profiles with slot Right hinge. The right hinge half is fixed. The hatch or door opens from left to right. Tip If you want to fit a door or hatch so that it cannot be lifted off, you can still use a left and right lift-off hinge. The two hinges are fitted in the end position and secure each other mutually. Fixed hinge. The hinge is non-liftoff. It is suitable for opening left or right. 357
3 K0434 in plastic, detachable, left Glass-fibre reinforced thermoplastic; axle in stainless steel Hinge black, axle natural finish K All hinges can be supplied on request with guide tabs for the slots of aluminium profiles (slots 6, 8 and 10). They facilitate mounting, secure the hinge against twisting and make it stronger. KIPP in plastic, detachable, left 358 Order No. A1 A2 A3 A4 B1 B2 D1 D2 D3 H Load bearing Approx. capacity weight N kg K , ,031 K , , , ,033 K , , ,035 K , , , ,037 K , , ,038 K , , , ,040 K , , , ,043 K , , , ,033 K ,5 17,5 29,5 29, , ,034 K , ,5 35, , ,036 K ,5 22,5 29,5 38, , ,038 K , ,5 43, , ,040 K ,5 27,5 29,5 48, , ,041 K ,5 32,5 29,5 57, , ,045 K , , ,034 K ,5 35,5 29, , ,036 K ,5 35, , ,038 K ,5 35,5 38, , ,040 K ,5 43, , ,042 K ,5 35,5 48, , ,043 K ,5 35,5 57, , ,047
4 K0434 in plastic, detachable, left KIPP in plastic, detachable, left Order No. A1 A2 A3 A4 B1 B2 D1 D2 D3 H Load bearing Approx. capacity weight N kg K , , , ,037 K ,5 17,5 38,5 29, , ,038 K , ,5 35, , ,040 K ,5 22,5 38,5 38, , ,042 K , ,5 43, , ,043 K ,5 27,5 38,5 48, , ,045 K ,5 32,5 38,5 57, , ,049 K , , ,038 K ,5 43,5 29, , ,040 K ,5 35, , ,042 K ,5 43,5 38, , ,043 K ,5 43, , ,045 K ,5 43,5 48, , ,046 K ,5 43,5 57, , ,050 K , , , ,040 K ,5 17,5 48,5 29, , ,041 K , ,5 35, , ,043 K ,5 22,5 48,5 38, , ,045 K , ,5 43, , ,046 K ,5 27,5 48,5 48, , ,048 K ,5 32,5 48,5 57, , ,052 K , , , ,043 K ,5 17,5 57,5 29, , ,045 K , ,5 35, , ,047 K ,5 22,5 57,5 38, , ,049 K , ,5 43, , ,050 K ,5 27,5 57,5 48, , ,052 K ,5 32,5 57,5 57, , ,
5 K0434 in plastic, detachable, right Glass-fibre reinforced thermoplastic; axle in stainless steel Hinge black, axle natural finish K All hinges can be supplied on request with guide tabs for the slots of aluminium profiles (slots 6, 8 and 10). They facilitate mounting, secure the hinge against twisting and make it stronger. KIPP in plastic, detachable, right 360 Order No. A1 A2 A3 A4 B1 B2 D1 D2 D3 H Load bearing Approx. capacity weight N kg K , ,031 K , , , ,033 K , , ,035 K , , , ,037 K , , ,038 K , , , ,040 K , , , ,043 K , , , ,033 K ,5 17,5 29,5 29, , ,034 K , ,5 35, , ,036 K ,5 22,5 29,5 38, , ,038 K , ,5 43, , ,040 K ,5 27,5 29,5 48, , ,041 K ,5 32,5 29,5 57, , ,045 K , , ,034 K ,5 35,5 29, , ,036 K ,5 35, , ,038 K ,5 35,5 38, , ,040 K ,5 43, , ,042 K ,5 35,5 48, , ,043 K ,5 35,5 57, , ,047 K , , , ,037 K ,5 17,5 38,5 29, , ,038 K , ,5 35, , ,040
6 K0434 in plastic, detachable, right KIPP in plastic, detachable, right Order No. A1 A2 A3 A4 B1 B2 D1 D2 D3 H Load bearing Approx. capacity weight N kg K ,5 22,5 38,5 38, , ,042 K , ,5 43, , ,043 K ,5 27,5 38,5 48, , ,045 K ,5 32,5 38,5 57, , ,049 K , , ,038 K ,5 43,5 29, , ,040 K ,5 35, , ,042 K ,5 43,5 38, , ,043 K ,5 43, , ,045 K ,5 43,5 48, , ,046 K ,5 43,5 57, , ,050 K , , , ,040 K ,5 17,5 48,5 29, , ,041 K , ,5 35, , ,043 K ,5 22,5 48,5 38, , ,045 K , ,5 43, , ,046 K ,5 27,5 48,5 48, , ,048 K ,5 32,5 48,5 57, , ,052 K , , , ,043 K ,5 17,5 57,5 29, , ,045 K , ,5 35, , ,047 K ,5 22,5 57,5 38, , ,049 K , ,5 43, , ,050 K ,5 27,5 57,5 48, , ,052 K ,5 32,5 57,5 57, , ,
7 K0435 in plastic Glass-fibre reinforced thermoplastic; axle in stainless steel Hinge black, axle natural finish K with different wing lengths can be used on the left and right. All hinges can be supplied on request with guide tabs for the slots of aluminium profiles (slots 6, 8 and 10). They facilitate mounting, secure the hinge against twisting and make it stronger. KIPP in plastic 362 Order No. A1 A2 A3 A4 B1 B2 D1 D2 D3 H Load bearing Approx. capacity weight N kg K ,5 11,5 19,5 19, , , ,008 K , ,032 K , , , ,034 K , , ,036 K , , , ,038 K , , ,039 K , , , ,041 K , , , ,041 K ,5 17,5 29,5 29, , ,036 K , ,5 35, , ,037 K ,5 22,5 29,5 38, , ,039 K , ,5 43, , ,041 K ,5 27,5 29,5 48, , ,043 K ,5 32,5 29,5 57, , ,046 K ,5 35, , ,040 K ,5 35,5 38, , ,041 K ,5 43, , ,042 K ,5 35,5 48, , ,044 K ,5 35,5 57, , ,047 K ,5 22,5 38,5 38, , ,043 K , ,5 43, , ,044 K ,5 27,5 38,5 48, , ,046 K ,5 32,5 38,5 57, , ,049 K ,5 43, , ,046 K ,5 43,5 48, , ,048 K ,5 43,5 57, , ,051 K ,5 27,5 48,5 48, , ,049 K ,5 32,5 48,5 57, , ,052 K ,5 32,5 57,5 57, , ,055
8 K0436 in plastic with clamping function 180 Thermoplastic hinge glass-fibre reinforced; axle in steel; clamping lever glass-fibre reinforced thermoplastic; mechanics in steel Hinge black; axle galvanized; clamping lever black; mechanics black galvanized Ø 6,6 K The hinges can be clamped in every position due to adjustable clamping lever. 29,5 On request: with guide tabs (slot 6, 8 and 10) for aluminium profiles. Combinations of different hinge wings A1 A2 A3 A4 KIPP in plastic with clamping function Order No. A1 A2 A3 A4 Load bearing capacity N K K ,5 17,5 29,5 29, K K ,5 22,5 38,5 38, K ,5 43, K ,5 27,5 48,5 48, K ,5 32,5 57,5 57,
9 K0437 Hinge plastic, with oblong holes Glass-fibre reinforced thermoplastic; axle in stainless steel Hinge black, axle natural finish K Horizontal adjustment of the hinges permits an optimal location. KIPP Hinge plastic, with oblong holes 364 Order No. Load bearing Approx. capacity weight N kg K ,008
10 K0438 plastic, with guide tabs, detachable Glass-fibre reinforced thermoplastic; axle in stainless steel; washer in thermoplastic Hinge and washer black, axle natural finish guide tab for 8 mm slot K The hinges can be fixed in a slot (8 mm) via the guide tabs. washer KIPP, plastic, with guide tabs, detachable Order No. Surface finish Load bearing Approx. capacity weight N kg K left hand 700 0,021 K right hand 700 0,
11 85 K0439 in plastic with a catching function 20 10,5 guide tab for slot 3 8 Hinge and coverings, glass-fibre reinforced thermoplastic PA; axle in stainless steel Ø6,4 10,2 Hinge and coverings black; axle natural finish K The hinges are equipped with a catching function. It catches in four positions and keeps doors and covers open and tightly closed. The hinges are available with or without guide tabs for aluminium profiles. A1 A2 A3 A4 indexed positions KIPP in plastic with a catching function 366 Order No. A1 A2 A3 A4 Guide tabs Load bearing Approx. for slot capacity weight N kg K ,75 17, ,073 K ,75 17, ,073 K ,75 17, ,073 K ,75 22,75 36,75 36, ,093 K ,75 22,75 36,75 36, ,093 K ,75 22,75 36,75 36, ,093
12 90 K0440 in plastic with adjustable friction 20 SW 4 10,5 3 8 Hinge and coverings, glass-fibre reinforced thermoplastic PA; steel parts in stainless steel guide tab for slot Ø6,4 10,2 Hinge and coverings black; steel parts natural finish K The friction hinges allow door positioning in any angular position desired. Friction resistance can be continuously adjusted by means of an adjusting screw of 0-5 Nm. The hinges are available with or without guide tabs for aluminium profiles. A1 A2 A3 A4 180 KIPP in plastic with adjustable friction Order No. A1 A2 A3 A4 Guide tabs Load bearing Approx. for slot capacity weight N kg K ,75 17, ,052 K ,75 17, ,052 K ,75 17, ,052 K ,75 22,75 36,75 36, ,064 K ,75 22,75 36,75 36, ,064 K ,75 22,75 36,75 36, ,
13 K0441, die cast zinc with oblong holes Die cast zinc; axle stainless steel; washers thermoplastic Hinge black powder-coated; axle natural finish; washers black K washer Horizontal adjustment of the hinges permits an optimal location. KIPP with oblong holes in die cast zinc 368 Order No. Guide tabs Load bearing Approx. for slot capacity weight N kg K ,175 K ,175 K ,175
14 K0442 in die cast zinc with clamping function Ø 8,2 180 Hinge in die cast zinc; axle in steel; clamping lever glass-fibre reinforced thermoplastic; mechanics in steel Hinge black powder-coated; axle galvanized; clamping lever black; mechanics black galvanized 1,5 guide tab for slot K ,1 21 The hinges can be clamped in every position due to adjustable clamping lever. The hinges are available with or without guide tabs for aluminium profiles. A1 A2 74 KIPP in die cast zinc with clamping function Order No. A1 A2 Guide tabs Load bearing for slot capacity N K ,5 22, K ,5 22, K ,5 22, K , K , K , K K K
15 K0579 in aluminium, detachable, left 180 Pressure-cast aluminium; axle in stainless steel Ø 14 9 Hinge matt galvanized; axle natural finish 40 Ø 6,6 K for surface elements and aluminium profiles On request: with guide tabs (slot 5, 6, 8, 10, 12 and 14) for aluminium profiles. Combinations of different wing lengths. A1 A2 A3 A4 KIPP in aluminium, detachable, left 370 Order No. A1 A2 A3 A4 Load Approx. bearing weight capacity N kg K ,056 K ,5 17,5 29,5 29, ,064 K ,072 K ,5 22,5 38,5 38, ,068 K ,5 43, ,070 K ,5 27,5 48,5 48, ,078 K ,5 32,5 57,5 57, ,088
16 K0579 in aluminium, detachable, right 180 Pressure-cast aluminium; axle in stainless steel Ø 14 9 Hinge matt galvanized; axle natural finish 40 Ø 6,6 K for surface elements and aluminium profiles On request: with guide tabs (slot 5, 6, 8, 10, 12 and 14) for aluminium profiles. Combinations of different wing lengths. A1 A2 A3 A4 KIPP in aluminium, detachable, right Order No. A1 A2 A3 A4 Load Approx. bearing weight capacity N kg K ,056 K ,5 17,5 29,5 29, ,064 K ,072 K ,5 22,5 38,5 38, ,068 K ,5 43, ,07 K ,5 27,5 48,5 48, ,078 K ,5 32,5 57,5 57, ,
17 K0580 in aluminium Ø 6 Ø Pressure-cast aluminium; axle in stainless steel Hinge matt galvanized; axle natural finish 40 Ø 6,6 K for surface elements and aluminium profiles, not detachable On request: with guide tabs (slot 5, 6, 8, 10, 12 and 14) for aluminium profiles. Combinations of different wing lengths. A1 A2 A3 A4 KIPP in aluminium 372 Order No. A1 A2 A3 A4 Load Approx. bearing weight capacity N kg K ,057 K ,5 17,5 29,5 29, ,065 K ,073 K ,5 22,5 38,5 38, ,069 K ,5 43, ,073 K ,5 27,5 48,5 48, ,079 K ,5 32,5 57,5 57, ,089
18 Notes 373
19 374
20 The standard terms and conditions of sale, delivery and payment that you can find on our website apply. Heinrich Kipp Werk KG Postfach DE Sulz a.n. Tel.: +49 (0) Fax: +49 (0) Internet
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
Furniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
Tubular connection elements
KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
Product Information 19 / 45HU Data-Center-Rack (Cabinet)
The Rosenberger-OSI Data-Center-Rack has been developed especially for FO patch distributors in Data Centers. In Data Centers the requirement for highest density becomes increasingly more important than
Huwilift DUO, Huwilift DUO Forte Seite 4 3. Huwilift MAXI. Huwilift MAXI UP. Huwilift Senso, Huwilift E-Senso Page 4 17
INDEX Lifters Huwilift DUO, Huwilift DUO Forte Seite 4 3 Classic solution for lift-up flaps. Huwilift MAXI Page 4 7 Quickly installed for a gentle lift. Huwilift MAXI UP Page 4 13 Lifts and lowers chest
mechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
Morgue refrigeration unit
Morgue refrigeration unit The Morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site
DryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
DELTA PT. Calculable Extra Performance
DELTA PT Calculable Extra Performance DELTA PT The Screw for Thermoplastics Optimal material flow Superior vibration resistance High torsional strength and tensile strength Calculable performance The Fastener
SL30-ISO PROFILE SYSTEM
AESTHETICS AND sustainability SL30-ISO PROFILE SYSTEM TECHNICAL DOCuMENTATION WWW.MHB.NL SL30-ISO PROFILE SYSTEM 1. SL30-ISO and SL30-ISO-PLUS Sustainability is getting worldwide more and more the attention
Type 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
Installation Instructions:
Portable Guardrail System Model Numbers: 7900060, 7900061, 7900062, 7900063 Installation Instructions: Portable Guardrail System This instruction is intended to meet the Manufacturer s Instructions requirement
Standard Sleep Pod Side Entry Assembly Instructions
Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people
Guide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
Terminal Boxes in Glass Fiber Reinforced Polyester (GRP)
Features Variants options Glass fiber reinforced polyester (GRP) enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 16 enclosure size options Various terminal
H45 LED - Direct and indirect pendant
RAL 01 10 00 IP 20 230V 50/60Hz Specifications Direct and indirect light pendant linear luminaire. Aluminium profile. Diffusers in frosted polycarbonate profile. Driver included. Supplied with clear base,
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
2&3 SECTION LOFT LADDER
TWIST CATCH ASSEMBLY A4 A2 A1 A3 A7 A6 A5 2&3 SECTION LOFT LADDER Images feature the 3 section loft ladder, but the same instructions apply to both 2 & 3 section ladders Installation and Operating Instructions
NEWSTAR BROCHURE. December 2007
NEWSTAR BROCHURE December 2007 Surface Overhead Door Closers Door Closing 5003 Silver Slide Cover SE Door Widths from 850mm to 1100mm. Door Weights 40kg to 80kg. Suitable for use in temperatures from -15
FRAME PROFILE MASONRY METAL DOOR FRAME FLUSH MASONRY KD MITER CORNER JOINT. #8 Screw (MS002485) Required on all fire rated KD frames. Bend Tabs.
FRAME PROFILE MASONRY FLUSH MASONRY KD MITER CORNER JOINT Bend Tabs Head #8 Screw (MS002485) Required on all fire rated KD frames Corner Assembly 2" (50.8) Head Jamb Head Break Away Corner Clip Spot Welds
Fluxa Area floodlights for high pressure discharge lamps and LEDs
Fluxa Area floodlights for high pressure discharge lamps and s Fluxa is a series of area floodlights with symmetrical or wide beam reflectors. There are 4 sizes for high pressure discharge lamps or with
POD Visor Instructions
POD Visor Instructions Please read fully before beginning assembly and mounting the Visor Parts List - Visor Left Part (LV), Visor Right Part (RV) Qty 2, Aluminum Crossbars Hardware - Qty 17, 1/4" X 3/4"
HARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: info@alaks.com.tr 1160F Aluminum Corner
Installation Manual. Toilet Partitions, Dressing Compartments & Shower Stalls
Installation Manual Toilet Partitions, Dressing Compartments & Shower Stalls Metpar Corp 95 State Street, Westbury, New York, USA, 11590 Tel: 516-333-2600 Fax: 516-333-2618 Internet: http://www.metpar.com
CI/SfB (74.4) n6 Date July 2008. Supersedes all previous issues 5.01. Seats
CI/SfB (74.4) n6 Date July 2008 s Supersedes all previous issues 5.01 Range Page 2 Cube A quality solid- compression moulded soft close seat. Fitted with buffers and metal hinges. Suitable for the Cube
2005 MINI Cooper. 2002-05 MANUAL TRANSMISSIONS On-Vehicle Servicing. Cooper S Getrag 285
2002-05 MANUAL TRANSMISSIONS On-Vehicle Servicing APPLICATION MANUAL TRANSMISSION APPLICATIONS Application Transmission Model Cooper R65 Cooper S Getrag 285 LUBRICATION SERVICE INTERVALS Inspect fluid
EJOT Spiralform. The thread formers for metal. EJOT The Quality Connection
EJOT Spiralform The thread formers for metal EJOT The Quality Connection Imprint Editor: EJOT GmbH & Co. KG Industrial Fasteners Division D 57319 Bad Berleburg Layout and Realisation: EJOT GmbH & Co. KG
Preface nivtec.com 3
nivtec.com Preface nivtec.com 3 nivtec 4 nivtec.com Planning with an Eye for Details nivtec.com 5 prolight+sound 2012 6 nivtec.com Meeting Point Fair Booth nivtec.com 7 Our Preparations 8 nivtec.com Enable
PAM Connectors. PAM Bayonet Connectors
PAM Bayonet Tel : 33 (0)1 60 84 21 40 Fax : 33 (0)1 60 84 43 81 info@bernier.tm.fr www.bernier.tm.fr Overview Miniature audio connectors with bayonet locking system, equipped with 07 or 10 contacts, and
Plastic Injection Molding
Training Objective After watching this video and reviewing the printed material, the student/trainee will understand the principles and physical operations of the plastic injection molding process. An
Saferand easierinstallation
EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little
Hollow or Cinder Block Wall Mount Job Aid
Summary This Job Aid covers: Hollow or Cinder Block Wall Mount Job Aid Hollow or Cinder Block wall Mount Bracket Installing the Mount Bracket into Cinder Block This Job Aid supports the Technician audience.
Rutenbeck Network Connection Box Cat. 5, shielded. Cable installation. UAE Connection Box Cat. 5 Operating Instructions.
Rutenbeck Network Connection Box Cat. 5, shielded 1-gang, 1 x 8-pole Order No.: 0180 00 2-gang, 2 x 8-pole Order No.: 0178 00 1-gang, (especially for channel construction) Order No.: 0802 00 2-gang, (especially
AVENTOS HF Wood / wide aluminum door application
AVENTOS HF Wood / wide aluminum door application Lift mechanism set Lift mechanism (qty 2) #7 x 35 mm (-3/8 ) wood screw (qty 0) Power factor 85 230 ( lift mechanism req.) 20F2200.N5 23 470 20F2200.N5
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
K17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
Narrow stile lock 1314
3 2 4 6 6 1 3 2 4 4 5 3 2 4 3 5.... ( (. ). ) 11 12 5 3 5 4 8 1 6 20 8.5 6.5 19 Backset 15 3 5 2 1 5 2 5 5 0 8 9 2 8 1 1 21-1mm 12 8 24 1 6 8 1 ( 9 2 5 ) ) ). ) Narrow stile lock 1314 CE EN 12209 2 4 5
How To Fit A Portman Door Leaf
Portman Sliding Door Gear Timber/Frames Doors Frameless Glass Doors Top track Portman top tracks are suitable for door leaves of up to 80kg as standard Material is 6063T6 aluminium alloy anodised to 15
CI/SfB. (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems
Uniclass L4181 EPIC D181 CI/SfB (31.59) X NOVEMBER 2003 Coburn Interior Sliding Systems Interior Sliding Door Gears FOR CUPBOARDS, WARDROBES, INTERIOR SLIDING AND FOLDING DOORS A comprehensive range of
DE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
1000/14.02 KOBSERT. Thread inserts for metals
1000/14.02 KOBSERT Thread inserts for metals Contents KOBSERT Thread inserts for metals Page The principle 3 The benefits 3 Product types 3 Applications in the Automotive and General industry 4 Technical
Plaisance 24. Sliding Systems. Sapa Building System
Plaisance 24 Sliding Systems Sapa Building System Plaisance 24 is Sapa s noninsulated sliding system for windows and doors. Available as one-, two-, three- and fourrail solution. Among its features, there
Precision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
BLADE S-MAX Cabinet for Blade Server
Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and
Bolted Connectors & Terminals
Disconnect Tee Connecr Type ADT5 75 Body 90 Nom. Function: ADT connecrs provide a convenient means of connecting lugged service conducrs overhead mains conducrs. Construction: Body - High strength cast
ALUMINIUM SYSTEMS S.A.
ΡΟΛΑ ΑΠΛΑ και ΘΕΡΜΟΜΟΝΩΤΙΚΑ NORMAL & THERMAL INSULATING ROLLER SHUTTERS ALUMINIUM SYSTEMS S.A. ALUMINIUM SYSTEMS S.A C.AL.COM,.,,,.,,.. C.AL.COM. C.AL.COM. About us C.AL.COM is a modern dynamic commercial
ETP 45 (EXTERNAL TECHNICAL PAPER NUMBER 45)
TAPPEX THREAD INSERTS LIMITED Masons Road Stratford-upon-Avon Warwickshire CV37 9NT Telephone: +44(0) 1789 206600 Fax: +44(0) 1789 414194 Email: sales@tappex.co.uk ETP 45 (EXTERNAL TECHNICAL PAPER NUMBER
MOVIEtube CR. Cinematography Rig. Setup Camera Sony PDW-F3 (MTCR-P-10-01) Version 03-2011 / English
MOVIEtube CR Cinematography Rig (MTCR-P-10-01) Setup Camera Sony PDW-F3 Version 03-2011 / English Step by step assembly instruction 1) The MOVIEtube CR (MTCR-P-10-01) is supplied as shown in the picture
Linkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
SUPPORT EQUIPMENTS 7 E 01-12
SUPPORT EQUPMENTS 7 E 0- CLAMPS type C 7. BRACKETS type MA and SUPPORT RNG type AG 7. U-BOLTS type U and PLASTC SADDLES type P 7. SNGLE ACCUMULATOR UNT type BAS 7.4 EPE TALANA s.r.l. - Viale Spagna, 009
RADAR. 227 www.ncdirect.co.uk
RADAR solutions RADAR RADAR Key System 228 RADAR Lockset 229 RADAR Cover Plate 229 RADAR Padlock 230 RADAR Automatic Toilet Entry System 231 RADAR Ramp 231 RADAR Ramp Sign 231 227 www.ncdirect.co.uk RADAR
Slides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
Profile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
Steel Meter Boxes & Meter Box Repairs Electric & Gas Design Manufacture Supply
since 1895 Steel Meter Boxes & Meter Box Repairs Electric & Gas Design Manufacture Supply British Manufacturer Ritherdon design all the steel products detailed within this brochure at their factory in
PRODUCT DATA SHEET T-LIFT DESK
T-LIFT DESK The height-adjustable desk allows you to alternate at work between sitting and standing. Formally minimalist; visually and technically based on the T-Platform. To be used for desk-sharing applications
Rack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb
INSTALLATION INSTRUCTIONS COMPETITION SERIES COILOVER SUSPENSION SYSTEM 03+ Scion xb NOTE: Progress Technology products should only be installed by a qualified licensed mechanic experienced in the installation
www.hammondmfg.com General Accessories Hardware
Heavy Duty Door Clamping Junction Box Padlock Kit Quick Release Clamp Replacement hardware for use on all 1418 and 1447 Series enclosures. Formed heavy gauge stainless steel clamp with stainless steel
Arm Replacement Right Chair Tools: Large Phillips (cross-tip) Screwdriver 1 person: ~5 minutes
Arm Replacement Tools: Large Phillips (cross-tip) Screwdriver 1. Activate seat height lever to maximum length, and then tip chair over for access to the arm brackets on the underside of the seat. 2. Locate
Sarasota Splash Back Prep and Shine Paint Restorer Inside Front Cover
Caution: Read entire label before using product. Do-It-Yourself PAINT RESTORER KIT Kit Contains: 1-16 oz. Water-based, Biodegradeable Liquid Prep 1-16 oz. Aerosol Shine Spray 1 - Spray Nozzle 2 - Scrub
How To Replace A Reverse Osmosis Water Tank
ALL MODELS REVERSE OSMOSIS WITH NONAIRGAP FAUCET 1. Read all instructions carefully before starting installation. 2. Find the cold water line beneath your sink. The cold water is typically on the right.
POLEMOUNT FIELD FIX ASSEMBLY INSTRUCTIONS
POLEMOUNT FIELD FIX ASSEMBLY INSTRUCTIONS Polemount Field Fix Support If you have any questions or incur any problems installing or using the new Polemount, please use Miovision s Support System by emailing
Knürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
VW GOLF Mk4 TDI FRONT MOUNTING INTERCOOLER INSTALLATION INSTRUCTIONS
VW GOLF Mk4 TDI FRONT MOUNTING INTERCOOLER INSTALLATION INSTRUCTIONS Tools required: 10mm/13mm socket and 3/8 drive ratchet with extension Torx T20/25/30 screwdrivers or bits Phillips head screwdriver,
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
Supplementary instructions. Connection cable IP 66/IP 68 (1 bar) Retrofitting set/accessory for instruments of the plics family. Document ID: 34107
Supplementary instructions Connection cable IP 66/IP 68 (1 bar) Retrofitting set/accessory for instruments of the plics family Document ID: 4107 Contents Contents 1 For your safety 1.1 Appropriate use...
Technical Information
Technical Information This section of the catalogue provides technical information that will help specify, install and maintain Surelock McGill devices and components. The topics are listed below: Blast
Technical data sheet PVC Bi-fold doors
Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top
AVENTOS HF Narrow aluminum door application
AVENTOS HF Narrow aluminum door application Lift mechanism set Lift mechanism (qty ) #7 x 35 mm (-3/8 ) wood screw (qty 0) Power factor 85 30 ( lift mechanism req.) 0F00.N5 3 470 0F00.N5 47 880 0F500.N5
Triac Printed Circuit Board Replacement
Technical Service Bulletin: Triac Printed Circuit Board Replacement TRONIC 5000C Pro Models: WH17, WH27, WH36 Introduction Fig. 1 ELECTRICITY IS EXTREMELY DANGEROUS. TAKE EXTRA PRECAUTIONS AND ENSURE ALL
IT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
Call for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
PHA 2000 PHB 3000 EXIT PAD
PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER
Installation guide for the SafeLine type anchorage device. Tested in compliance with EN 795: 1996. No.: SE-...
Installation guide for the SafeLine type anchorage device Tested in compliance with EN 795: 1996 No.: SE-... Version: 09.10.2008 SE 67 Subject to technical alterations! Contents 1. General information
CAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
K17.12 Door closers K17. Doors 01.09.2013
K17 Doors K17.12 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. OPTIC door closer TS40(V) with scissor
3D Work- and Welding Table D28. Innovative technology improved. Englisch English Version 7.0. Award winning design. D 28 ProfiLine
Englisch English Version 7.0 D28 ProfiLine meets the requirements of high-quality suppliers D 28 ProfiLine 3D Work- and Welding Table D28 Award winning design D28 ProfiLine meets the requirements of high-quality
TONNEAU INSTALLATION GUIDE
TONNEAU INSTALLATION GUIDE Warranty, Care & Maintenance Model 4056 Toyota Tacoma Double Cab 5' Short Bed 2005-Current (With Multi-Track System) EASY AS 1-2-3! NORMAL INSTALLATION TIME 30 MINUTES For Warranty
Stainless Steel and Mild Steel Enclosures. Stainless Steel and Mild Steel Enclosures
SX 8 The SX range comprises 14 sizes of enclosure manufactured in either stainless steel or mild steel. 11 sizes are available in depths of 140 or 200mm and 8 sizes are available in depths of 140, 200
Manual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
High-speed folding doors. F Series
High-speed folding doors F Series 02 F Series The horizontal folding motion of high-speed folding doors ensures that the entire vertical clearance is achieved immediately. F Series doors open at high speed
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
Watertight Luminaire, surface, 1x18W / 2x18W / 2x24W / 1x36W / 2x36W / 2x54W
Watertight Luminaire, surface, 1x18W / x18w / x4w / 1x36W / x36w / x54w IP67 00 cd/klm 18W 36W 30V/ 50/60Hz 1x18W 5105 0005..-xxx.8 x18w 5105 0001..-xxx 3.8 x4w 5105 0045..-xxx 3.0 x54w 5105 0044..-xxx
Solstice/Sky Water Pump Replacement
Solstice/Sky Water Pump Replacement The water pump on the Solstice/Sky is starting to need replacement on some vehicles. This guide will help in replacing the water pump while the engine is still in the
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
Rotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
3. Geberit Pluvia Roof Drainage Systems
3. Geberit Pluvia Roof Drainage Systems Assortment overview: Pluvia Outlets...52 3.1 Roof outlets... 53 3.1.1 Roof outlets up to 25 l/s...53 3.1.2 Roof outlets up to 100 l/s...55 3.2 Roof outlets for gutters...
SSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
Twist Drill Grinding Attachment By Steven Skiprat Jackson June 2009
Twist Drill Grinding Attachment By Steven Skiprat Jackson June 2009 Part 1. About the tool Part 2. Mounting the tool Part 3. Using the tool Part 1. About the tool This little gadget while not a precision
and Mounting options NEW Additional Profiles HepcoMotion MCS aluminium frame and machine construction system including MFS fencing system
NEW Additional Profiles and Mounting options HepcoMotion MCS aluminium frame and machine construction system including MFS fencing system MCS Machine Construction System and MFS Machine Fencing System
Hinge Replacement & Hinge and Hardware Adjustment Guide for Andersen Frenchwood Hinged Patio Doors Manufactured Before November 2005
Hinge Replacement & Hinge and Hardware Adjustment Guide for Andersen Frenchwood Hinged Patio Doors Manufactured Before November 2005 For ease of installation and continued enjoyment of your Andersen product,
BEDFORD DORMOBILE PARTS LIST JUNE 2016
BEDFORD DORMOBILE PARTS LIST JUNE 2016 FOR UK AND EU REGION REPRODUCTION PARTS FOR YOUR ORIGINAL DORMOBILE BEDFORD CA AND CF CONVERSIONS DORMOBILE LIFTING ROOF PARTS BEDFORD CA & CF Roof vent cover (colour
Dell P Series Monitor VESA Mounting Bracket Installation Instructions
Dell P Series Monitor VESA Mounting Bracket Installation Instructions The VESA mounting bracket enables a Wyse cloud client to be mounted to the Dell P Series Monitor and the Dell E24 Monitor. The cloud
ASSEMBLY INSTRUCTIONS Residential Roof solutions
ASSEMBLY INSTRUCTIONS Residential Roof solutions CROSSRAIL System USA Table of contents TABLE OF CONTENTS THE COMPANY SAFETY REGULATIONS MATERIALS REQUIRED TOOLS REQUIRED ASSEMBLY TERMS AND CONDITIONS
Incorporating V2.3. Product spec >>> > Series ECG - Egg Crate Grilles. > Series ECG45-45 Egg Crate Grilles
Incorporating V2.3 Product spec >>> > Series ECG - Egg Crate Grilles > Series ECG45-45 Egg Crate Grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract