lindab duct suspension & support system Duct suspensions & Support systems

Transcription

1 lindab duct suspension & support system Duct suspensions & Support systems

2 lindab duct suspension & support system Content Duct suspensions & Support systems Duct suspension Threaded rod OSB 0... Channels and channel brackets Supported cantilever CLS... 0 Rectangular plain washer SB... Channel RPC... 0 Hexagonal studding connector OSM... Channel nut long spring CNLS... 0 Eye bolt EB... Channel nut short spring CNSS... 0 Circular suspension Haer head bolt HHB... 0 Duct support DH... Haer top screw HTS... 0 Suspension rings UV... UV0... Brackets UVH... UVH0... Z-fastener with vibration damper WCZGM... DRSN...00 L-fastener with vibration damper WCLGM... We reserve the right to make changes without prior notice

3 lindab duct suspension & support system We reserve the right to make changes without prior notice

4 lindab duct suspension & support system We reserve the right to make changes without prior notice

5 lindab duct suspension & support system We reserve the right to make changes without prior notice

6 lindab duct suspension & support system Duct suspension FB ensions FB Ø, Ø, FB 0 Ø,0 Ø,0 Ø, 0, FB 0 Ø, Ø, Ø, 0 0, Description Suspension band Suspension bands are designed to suspend air ducts. It is easy to cut and bend and allows a quick and economical method of assembly. The perforated suspension steel band is made of steel with assorted holes, which, according to the type selected, allow fixing of threaded rods, threaded clamps, bolts, etc. The small holes can be used with rivets, screws or nails. Type Width Thickness m Material FB 0, galvanized FB 0, galvanized FB 0 0 0, galvanized FB 0 0, galvanized FB 0 0, galvanized FB 0, galvanized FB 0 0 0, stainless FB 0 0,0 stainless FB 0 FB 0 FB 0 FB 0 Ø,0 Ø, Ø, Ø,0 Ø, Ø, Ø, Ø, Ø, Ø, 0 0, 0,, 0, 0,0 Width Thickness FB0 0, 0 We reserve the right to make changes without prior notice

7 lindab duct suspension & support system Threaded rod OSB 0 ensions 0 0 Thread axis Description The threaded rod is according to the standard DIN -. That means that the thread angle is 0. Property class:. Surface finish: Electro zinc plated No fire classification Fire classification Tensile strength Yield strength R0 R0 ension Type At safety factor Recoended max load at safety factor Recoended max load at fire classified installations [] [kn] [kn] [kn] [kn] M 00 0,,,0 M 000 0,,,0 M 00 0,,,0,0 M 000 0,,,0,0 M 00 0,,,0,0 M 000 0,,,0,0 Ordering exaple ension l Type OSB We reserve the right to make changes without prior notice

8 l lindab duct suspension & support systems Duct suspension SB Rectangular plain washer Surface finish: Hot dipped galvanized. b Thickness 0 b b ension b SB OSM Hexagonal studding connector Used together with threaded rod to reduce wastage to a minimum. Threaded in both ends with a stop in the middle. Surface finish: Electro zinc plated. M 0 M 0 M 0 M 0 SB FB ension OSM 0 EB Eye bolt Surface finish: Electro zinc plated. M, M, M, ension EB We reserve the right to make changes without prior notice

9 lindab duct suspension & support system Duct holder DH ensions Ø d L A B Description Used to fix ducts standing on joists. Is provided with fixing holes in the base. Varying height can be arranged by installing two duct supports, one inside the other. These can be locked with two self-tapping screws on each short side. The L dimension can then vary: for Ø 0 between 0 and 00, for Ø 0 between 0 and 0. Can also be delivered in additional sizes. ension Height L DH 0 0 nom * Reinforced A B L m kg 0 0 0,0 0, , 0 0,0 0 * 0 0 0, 0 * 0, * 0 0 0, * 0, 0 * 0 0 0, 0 * 0, 00 * , 00 * 0 0, 0 * 0 0 0, 0 * 0, , 0, , , , , 0 0 0,0 0 0, We reserve the right to make changes without prior notice

10 lindab duct suspension & support system Duct holder MDH Ø 00 h M b d Description The folded shape of the duct holder and its multiple of fixation points makes the duct system very firmly attached. The duct holder is suitable for of all types of duct mounting. I.e. vertical and horizontal onto a wall, hanging under a ceiling and standing on a floor. The screw holes are easy to access and shaped like double key-holes which makes the mounting fast and easy. Ø 0 0 h The duct is fastened with help of suspension rings UV0 or UVH0, which are threaded through the duct holder. ensions M M Ø 0 00 b h d d b nom b d h m kg , 0 0 0, 0 0 0, , , , , ension Distance to fixing surface, h MDH , , , ,0 0 0, We reserve the right to make changes without prior notice

11 lindab duct suspension & support system Duct holder MDH nom b d h m kg 0 0, , , , , , , 00 0, , , , , ,0 We reserve the right to make changes without prior notice

12 lindab duct suspension & support system Suspension rings UV ensions Ø, t 0 Description For suspension of circular ducting. At insulated duct it is recoended that the suspension ring is mounted inside the insulation. nom t Can also be delivered in additional sizes. m kg 0,0 0, 0,0 0,,0 0, 0,0 0, 00,0 0, 0,0 0,,0 0,,0 0, 00,0 0, 0,0 0, 00,0 0, 0,0 0, 0,0 0,0 ension UV 00 We reserve the right to make changes without prior notice

13 lindab duct suspension & support system Suspension rings UV0 ensions Ø, t Description For suspension of circular ducting. At insulated duct it is recoended that the suspension ring is mounted inside the insulation. 0 nom t Can also be delivered in additional sizes. m kg, 0,0 0, 0, 0, 0,, 0, 0,0 0,0 00,0 0, 0,0 0,0,0 0, 00,00 0, 00,00 0, 0,00 0, 00,00 0, 00,00, 0,00, ension UV0 00 We reserve the right to make changes without prior notice

14 lindab duct suspension & support system Suspension rings UVH ensions Ø, t 0 Description For suspension of circular ducting. At insulated duct it is recoended that the suspension ring is mounted inside the insulation. N.B. Is sold in pairs. nom t Can also be delivered in additional sizes. m kg 0,0 0,0 0,0 0,0,0 0,0 0,0 0,0 00,0 0,0 0,0 0,0,0 0,0,0 0,0 00,0 0,0 0,0 0,0 00,0 0,0 0,0 0,0 0,0 0,0 ension UVH 0 We reserve the right to make changes without prior notice

15 lindab duct suspension & support system Suspension rings UVH0 ensions Ø, t 0 0 Description For suspension of circular ducting. At insulated duct it is recoended that the suspension ring is mounted inside the insulation. N.B. Is sold in pairs. nom t Can also be delivered in additional sizes. m kg 0, 0, 0, 0,, 0, 0,0 0, 00,0 0, 0,0 0,0,0 0, 00,00 0, 00,00 0,0 0,00 0, 00,00, 00,00,0 0,00, ension UVH0 00 We reserve the right to make changes without prior notice

16 lindab duct suspension & support system Circular suspension DRSN ensions Ø 00 Ø0 0 t t 0 t Description For suspension of circular ducting. Combined connection nut M/M and slotted quick closure for Ø 00. Ø 00 With slotted quick closure. With screw PH M 0. Connection nut M+M. Ø0 0 With Ø hole. With bolt and nut H M 0. Connection nut M+M. nom t m kg, 0, 0, 0, 0, 0,, 0, 0, 0, 0, 0, 0, 0,0 0, 0, 00, 0,, 0, 0, 0, 0, 0, 00, 0,, 0,, 0, 00, 0, 0, 0, 00, 0, 0,,00 00,,0 0,,,, 00,, ension DRSN 0 00,, 00,, 0,,00 0,,0 00 We reserve the right to make changes without prior notice

17 lindab duct suspension & support system Circular suspension DRSNR ensions Ø 00 t Ø0 0 0 t Description For suspension of circular ducting. With vibration-damping internal rubber lining. Combined connection nut M/M and slotted quick closure for Ø 00. ension DRSNR 0 Ø 00 With slotted quick closure. With screw PH M 0. Connection nut M+M. Ø0 0 With Ø hole. With bolt and nut H M 0. Connection nut M+M. nom t m kg, 0, 0, 0, 0, 0,, 0, 0, 0, 0, 0, 0, 0, 0, 0,0 00, 0,, 0, 0, 0, 0, 0, 00, 0,0, 0,, 0, 00, 0, 0,,0 00,, 0,, 00,,0 0,,0,,0 00,,0 00,,00 00,,0 0,,0 0,,0 We reserve the right to make changes without prior notice 0

18 0 00 lindab duct suspension & support system Duct holder RK ensions Description Hot dip galvanized duct holder with foot. The ring is joined with two M bolts and nuts. The leg is joined with a M bolt and nut The foot has four fastening holes. nom Ring material m kg 0 0,0 0,0 0 0,0 00 0,0 0 0,0 0,0 00 0, ,0 0 0,0 00 0,0 00 0,0 0 0,0 ension RK 00 0 We reserve the right to make changes without prior notice

19 lindab duct suspension & support systems Channels and channel brackets CL Cantilever Material: Hot dipped galvanized. To be fixed of walls, floors and ceilings as an assembly profile. 0 0 l 0 Ø CL 00 CLS Supported cantilever Material: Hot dipped galvanized. To be fixed of walls, floors and ceilings as an assembly profile.the diagonal support bar makes it suitable for heavy loads. a b l 0 a b CLS 00 Ø We reserve the right to make changes without prior notice 0

20 lindab duct suspension & support systems Channels and channel brackets RPA Channel Surface finish: Electro zinc plated. SLOT/ PLAI Thickness A B SLOT SLOT t A c/c 0 B B ension A B Type Thickness RPA SLOT c/c Ø,, B RPC Channel Surface finish: Electro zinc plated. Available as plain or slotted. A B SLOT/ PLAI Thickness t 000 PLAI, 000 PLAI, 000 SLOT, 000 SLOT, 000 PLAI, B 000 PLAI, 000 SLOT, A 000 SLOT, 000 PLAI, 000 PLAI, t =, c/c SLOT, 000 SLOT, 000 PLAI, 000 PLAI, 000 SLOT, t =, A B 000 SLOT, ension A B Type Thickness RPC 000 SLOT, 0 We reserve the right to make changes without prior notice

21 lindab duct suspension & support systems Channels and channel brackets Channel slide nuts Channel slide nuts and springs are self aligning and are specially manufactured to complement the range of RPC channels. The slide nut can be moved along the channel for ease of alignment whilst the springs tension the nut against the internal channel lips to facilitate installation. In addition to the shape of the slide nuts prevents turning inside the channel eliminating the need to grip the nut whilst inserting bolts or threaded rod. CN Channel nut, without spring ension CN CNS Channel nut with spring ension CNS CNLS Channel nut long spring ension CNLS We reserve the right to make changes without prior notice 0

22 lindab duct suspension & support systems Channels and channel brackets CNSS Channel nut short spring ension HHB Haer head bolt ension HTS Haer top screw ension CNSS HHB 0 HTS 0 0 We reserve the right to make changes without prior notice

23 lindab duct suspension & support systems Channels and channel brackets CEC Channel end cap for channel for channel For cannel CEC We reserve the right to make changes without prior notice 0

24 lindab duct suspension & support systems Brackets WCL L-fastener Surface finish: Electro zinc plated. l Thickness l Ø 0 0 code ension WCL WCLT Fastening bracket Surface finish: Electro zinc plated. l Thickness 0, 0, 00, l code ension WCLT Ø, ( ) WCZ Z-fastener Surface finish: Electro zinc plated. Ø Thickness code ension WCZ 0 We reserve the right to make changes without prior notice

25 lindab duct suspension & support systems Brackets WCMP MP-fastener For hanging in corrugated sheet metal roofing. The fastener fits wave bottoms of width 0 0. The fastener angle has holes of Ø,, intended for blind rivet or sheet metalscrew B. The fastener can handle a weight of kg without any deformation code ension VIPPB Toggle For hanging in corrugated sheet metal roofing. 0 code ension SPTRAD Coil wire Galvanized insulation thread. code ension WCMP 0 VIPPB SPTRAD We reserve the right to make changes without prior notice 0

26 lindab duct suspension & support system Brackets WCRVG ensions º 0, 0 Ø, º, Ø, Ø Description RV suspension profile with shock absorbing rubber For suspension of ventilation ducts with the use of threaded rods and self-drilling screws or blind rivets. Allows fixing against trapeze type ceilings. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel Thickness:... WCRVG We reserve the right to make changes without prior notice

27 lindab duct suspension & support system Brackets WCVG ensions 0 Ø ( ) Ø Ø 0 Description V suspension profile with shock absorbing rubber For suspension of ventilation ducts with the use of threaded rods and self-drilling screws or blind rivets. Allows fixing against trapeze type ceilings. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel Thickness:... WCVG We reserve the right to make changes without prior notice

28 lindab duct suspension & support system Brackets WCZGM ensions Ø, ( ) Ø 0 Ø Description Z suspension profile with shock absorbing rubber For suspension of ventilation ducts. Easy height adjustment by using threaded rod and hex nuts. Fixing with blind rivets or self drilling screws. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel Thickness:... WCZGM We reserve the right to make changes without prior notice

29 lindab duct suspension & support system Brackets WCLGM ensions Ø ( ),, Ø Description L suspension profile with shock absorbing rubber 0 Ø For suspension of ventilation ducts. Easy height adjustment by using threaded rod and hex nuts. Fixing with blind rivets or self drilling screws. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel Thickness:... WCLGM We reserve the right to make changes without prior notice

30 lindab duct suspension & support systems Brackets Beam clamp To fix on to beams without welding or drilling. With hexagon head screw DIN., threaded end with cup point according to EN ISO and locknut DIN. Available as threaded (BCT) or not threaded (BC). Material: Body made of malleable cast iron, zinc plated, casting tolerance acc. to DIN GTA /. BCT Threaded rod hole. M M M BC Not threaded rod hole. ension BCT We reserve the right to make changes without prior notice

31 lindab duct suspension & support systems Frame support system Stand system Consisting of square tubes and a number of parts which are used to create a range of different structures. This stand system is made up of square tubes in accordance with DIN and materials in accordance with SIS. The load diagram indicates the maximum permissible load with regard to flex sensing and does not take deflection into account. The diagram indicates the maximum permissible load for different distances between the supporting legs without exceeding the limit load in accordance with the Swedish Fatigue Design Code for Welded Structures, StBK-N, static load. This load diagram is applicable to all horizontal tubes with their associated supports, provided that there are no lateral forces. Load, kg B A 00 Square part SSTP Square tube SSR 0 0 c/c for support, m 0,,0,,0,0 0 0 A = Extended, evenly distributed static load tubes x x, B = Centrically applied static spot load x x, Example Load 0 kg, distributed evenly Stand tube x gives a max c/c between supporting legs of, m SSR Square tube Surface finish: Hot dipped galvanized. Thickness, 000 SSR We reserve the right to make changes without prior notice

32 lindab duct suspension & support systems Frame support system SSTP T-piece Surface finish: Electro zinc plated. Thickness 0 0,0 SSF Support foot Surface finish: Electro zinc plated. Thickness 0 0,0 SSFA Adjustable foot Surface finish: Electro zinc plated. Thickness 0 0,0 SSTP SSF SSFA SSH Corner piece Surface finish: Electro zinc plated. Thickness 0 0,0 SSH We reserve the right to make changes without prior notice

33 lindab duct suspension & support systems Frame support system SSB Angle internal and external Surface finish: Electro zinc plated. SSB Angle 0 Surface finish: Electro zinc plated. SSVA Wall attachment Surface finish: Electro zinc plated. SSKV Corner X Surface finish: Electro zinc plated. Thickness 0 0,0 Angle Thickness 0 0,0 Angle Thickness 0 0,0 Thickness 0 0,0 SSB SSB 0 SSVA SSKV We reserve the right to make changes without prior notice

34 lindab duct suspension & support systems Frame support system SBEI Pipe cover, inside Material: Plastic. for square tubes for square parts ension Thickness SBEU Pipe cover, outside Material: Plastic. for square tubes for square parts ension Thickness GMATTA, GKUDDE Anti-vibration mat Plain rubber mat, or thickness with 0 shore, or ribbed mat, designed for vibration damping, thickness with 0 shore. SBEI 0 SBEU 0 Code GMATTA 0 kg/cm² GKUDDE 0 kg/cm² GKUDDE 0 kg/cm² GKUDDE We reserve the right to make changes without prior notice

35 lindab duct suspension & support systems Gripple hang fast system Overview Gripple product range Hanger kits FHL FHS FHT FHE FHE0 FHGS FHGT FHRDS FHRDT Name Fast hanging wire kit loop Loop Fast hanging wire kit stud Drop in anchor and stud Fast hanging wire kit toggle Toggle Fast hanging wire kit eyelet Straight eyelet Fast hanging wire kit 0 eyelet Fast hanger groove stud 0 eyelet Drop in anchor and stud Fast hanger groove toggle Toggle Fast hanger rectangular duct stud Drop in anchor and stud Fast hanger rectangular duct toggle Toggle at/in ceiling Wire and lock Wire and lock Wire and lock Wire and lock Wire and lock Wire Wire Wire Wire in between Trapeze Trapeze Duct trapeze Duct trapeze at duct Accessories Tools FHCWA FHCS WRT FHPS WRC KEY-F Name Fast hanger concrete wire anchor Concrete anchor Corner Saddle Wire rope twister Fast hanging plastic sleeve Wire rope cutter Flag key at/in ceiling Wire twister Protective sleeve Wire cutter Unlock key in between Corner saddle at duct We reserve the right to make changes without prior notice

36 lindab duct suspension & support systems Gripple hang fast system Fast hanging wire kit Each kit comprises a length of steel wire rope with a choice of different end fixings, a rope lock to adjust the free end, and a setting key. Hangers are available as standard in load related sizes. Each size is designed to carry a specific weight range and has a designated safe working load (SWL). NOTE! The free end of the wire rope must have a length of minimum. The reason for this is to prevent a possibly frying wire rope to jeopardize the hold property of the lock. Size Working load span 0 kg 0 kg Stainless spring type 0 S Wire rope entry hole Locking wedge Zink housing Serrated teeth Gripple hanger No. 0 We reserve the right to make changes without prior notice

37 lindab duct suspension & support systems Gripple hang fast system FHL Fast hanging wire kit loop For looping around purlins, beams, roof trusses and other suitable building features. Comes as a ready-to-use kit with wire and Hang Fast system. The types made of stainless steel (SS) have a type approval for fire class. Note: The working load at fire class differs from the normal working load. Max. working load at fire class Wire rope Working length load span R R0 Size kg Material kg 00 0 GALV GALV GALV GALV GALV GALV 00 0 SS GALV SS GALV SS GALV Material Size FHL GALV 000 We reserve the right to make changes without prior notice

38 lindab duct suspension & support systems Gripple hang fast system FHS Fast hanging wire kit stud For anchoring into concrete ceilings, metal decking and channel nuts. Comes as a ready-to-use kit with drop-in anchor, wire and Hang Fast system. The types made of stainless steel (SS) have a type approval for fire class. Note: The working load at fire class differs from the normal working load. Size Wire rope length Stud size Stud end length Working load span kg Material Max. working load at fire class R R0 kg 00 M 0 0 GALV 000 M 0 0 GALV 000 M 0 0 GALV 000 M 0 0 GALV 000 M 0 0 GALV 000 M 0 0 GALV 000 M 0 0 GALV 000 M 0 0 GALV 000 M 0 0 GALV 00 M 0 GALV 000 M 0 GALV 000 M 0 GALV 000 M 0 GALV 000 M 0 GALV 000 M 0 GALV 00 M 0 SS M 0 GALV 000 M 0 SS M 0 GALV 000 M 0 SS M 0 GALV Material Type (Stud size) Size FHS GALV M 000 We reserve the right to make changes without prior notice

39 lindab duct suspension & support systems Gripple hang fast system FHT Fast hanging wire kit toggle For roof cladding, light fittings, luminaries and other cavities. Comes as a ready-to-use kit with wire and Hang Fast system. Size Wire rope length Working load span kg Size FHE Fast hanging wire kit eyelet For attaching to a variety of fixtures and fittings. Easily attached to different substrates using screws. Comes as a ready-to-use kit with wire and Hang Fast system. FHT 000 Size Wire rope length Working load span kg Size FHE 000 We reserve the right to make changes without prior notice

40 lindab duct suspension & support systems Gripple hang fast system FHE0 Fast hanging wire kit 0 eyelet For fixing into concrete, steel or wood using gas or power. Easily attached to different substrates using screws. Comes as a ready-to-use kit with wire and Hang Fast system. Size Wire rope length Working load span kg Size FHE0 000 We reserve the right to make changes without prior notice

41 Gripple hang fast system lindab duct suspension & support systems FHGS Fast hanger groove stud For fast suspension of cable containment, air conditioning cassettes, chilled beams, etc. Pin allows rapid adjustment. Tapered design slots easily into strut. Comes as a ready-to-use kit with drop-in anchor, stud, wire and Trapeze system. The types made of stainless steel (SS) have a type approval for fire class. Note: The working load at fire class differs from the normal working load. Max. working load at fire class Wire rope Stud Working length Stud length load span R0 R0 R0 Size size kg Material kg 00 M 0 0 GALV 00 M 0 0 SS M 0 0 GALV 000 M 0 0 SS M 0 0 GALV 000 M 0 0 SS 0 0 Material Type (Stud size) Size FHGS GALV M 000 We reserve the right to make changes without prior notice

42 lindab duct suspension & support systems Gripple hang fast system FHGT Fast hanger groove toggle For fast suspension of cable containment, air conditioning cassettes, chilled beams, etc. Pin allows rapid adjustment. Tapered design slots easily into strut. Comes as a ready-to-use kit with toggle, wire and Trapeze system. Size Wire rope length Working load span kg Size FHRDS Fast hanger rectangular duct stud For fast suspension of rectangular ducting. Eliminates channel support. Pin allows rapid adjustment. Spreads the load across fixing points, for self-drilling screws or pop rivets (not pivoted). Rubber pad prevents leakage. FHGT 000 Comes as a ready-to-use kit with drop-in anchor, stud, wire and Duct Trapeze system. Wire length Stud size Stud length Working load span Size kg 00 M M 0 Size FHRDS 00 We reserve the right to make changes without prior notice

43 lindab duct suspension & support systems Gripple hang fast system FHRDT Fast hanger rectangular duct toggle For fast suspension of rectangular ducting. Eliminates channel support. Pin allows rapid adjustment. Spreads the load across fixing points, for self-drilling screws or pop rivets (not pivoted). Rubber pad prevents leakage. Comes as a ready-to-use kit with toggle, wire and Duct Trapeze system. Wire Size rope length Working load span kg Size FHRDT 00 FHCWA Fast hanger concrete wire anchor For anchoring in non-cracked concrete, precast hollow concrete and hard natural stone. Knock into a pre-drilled hole and pull with a claw haer to set. A B C Safe Working Load kg Hole Ø Hole depth, 0 0 FHCWA We reserve the right to make changes without prior notice

44 lindab duct suspension & support systems Gripple hang fast system FHCS Corner Saddle To minimize wire rope friction on rectangular ducting. Also available with magnetic fixing. Type Standard MAGN Type WRT Wire rope twister FHCS MAGN To keep tail wires neat and tidy. Grey aesthetic finish blends into background. WRT FHPS Fast hanging plastic sleeve To minimize the risk of condensation on wire rope. Black finish. Size m Thickness Size FHPS We reserve the right to make changes without prior notice

45 lindab duct suspension & support systems Gripple hang fast system WRC Wire rope cutter Purpose-made for cutting wire rope. Hardened jaws for durability. WRC KEY-F Flag key For adjusting the Hang Fast hanger No. height (pre-load). Type KEY-F - We reserve the right to make changes without prior notice