SMAJ Transient Voltage Suppressor Diode Series
|
|
- Theresa Rodgers
- 7 years ago
- Views:
Transcription
1 *RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 4 watts pplications I S (Min. Level 4) I T I Surge SMJ Transient Voltage Suppressor iode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. ourns offers Transient Voltage Suppressor iodes for surge and S protection applications, in compact chip package O-214 (SM) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Voltage from 5 V up to 17 V and reakdown Voltage up to 2 V. Typical fast response times are less than 1. ns for unidirectional devices and less than 5. ns for bidirectional devices from V to Minimum reakdown Voltage. ourns hip iodes conform to J standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. lectrical haracteristics (@ T = 25 Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power issipation (T P = 1 ms) (Note 1,2) P PK 4 Watts Peak orward Surge urrent 8.3 ms Single Half Sine Wave Superimposed on Rated Load (J Method) (Note 3) I SM 4 mps Steady State Power TL = 75 P M(V) 1. Watts Instantaneous orward I PP = 35 (or Unidirectional Units Only) V 3.5 Volts Operating Temperature Range T J -55 to +15 Storage Temperature Range T STG -55 to Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 per Pulse erating urve. 2. Thermal Resistance Junction to Lead ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Single Phase, Half Wave, 6 Hz, resistive or inductive load. or capacitive load, derate current by 2 %. How to Order SMJ 5. sia-pacific: Tel: ax: urope: Tel: ax: The mericas: Tel: ax: Package SMJ = SM/O-214 Working Peak Voltage 5. = 5. VRWM (Volts) Suffix = 5 % Tolerance Unidirectional evice = 5 % Tolerance idirectional evice *RoHS irective 22/95/ Jan including nnex. ustomers should verify actual device performance in their specifi c applications.
2 SMJ Transient Voltage Suppressor iode Series lectrical haracteristics T = 25 Unless Otherwise Noted) Unidirectional evice idirectional evice reakdown Voltage V R (Volts) Working Peak Voltage V RWM I RSM Surge urrent Part Part Part I Min. Max. T V RWM Number Marking Number Marking (m) (Volts) I R (μ) V RSM (Volts) I RSM (mps) SMJ5. H SMJ5. T / SMJ6. HG SMJ6. TG / SMJ6.5 HK SMJ6.5 TK / SMJ7. HM SMJ7. TM / SMJ7.5 HP SMJ7.5 TP / SMJ8. HR SMJ8. TR / SMJ8.5 HT SMJ8.5 TT / SMJ9. HV SMJ9. TV / SMJ1 HX SMJ1 TX / SMJ11 HZ SMJ11 TZ SMJ12 I SMJ12 U SMJ13 IG SMJ13 UG SMJ14 IK SMJ14 UK SMJ15 IM SMJ15 UM SMJ16 IP SMJ16 UP SMJ17 IR SMJ17 UR SMJ18 IT SMJ18 UT SMJ2 IV SMJ2 UV SMJ22 IX SMJ22 UX SMJ24 IZ SMJ24 UZ SMJ26 J SMJ26 V SMJ28 JG SMJ28 VG SMJ3 JK SMJ3 VK SMJ33 JM SMJ33 VM SMJ36 JP SMJ36 VP SMJ4 JR SMJ4 VR SMJ43 JT SMJ43 VT SMJ45 JV SMJ45 VV SMJ48 JX SMJ48 VX SMJ51 JZ SMJ51 VZ SMJ54 R SMJ54 W SMJ58 RG SMJ58 WG SMJ6 RK SMJ6 WK SMJ64 RM SMJ64 WM SMJ7 RP SMJ7 WP SMJ75 RR SMJ75 WR SMJ78 RT SMJ78 WT SMJ85 RV SMJ85 WV SMJ9 RX SMJ9 WX SMJ1 RZ SMJ1 WZ SMJ11 S SMJ11 X SMJ12 SG SMJ12 XG SMJ13 SK SMJ13 XK SMJ15 SM SMJ15 XM SMJ16 SP SMJ16 XP SMJ17 SR SMJ17 XR Notes: 1. Suffix denotes a 5 % tolerance unidirectional device. 3. or bidirectional devices with a V R of 1 volts or less, the I R limit is double. 2. Suffix denotes a 5 % tolerance bidirectional device. 4. or unidirectional devices with a V max. of 3.5 V at an I of 35,.5 Sine Wave of 8.3 ms Pulse Width. ustomers should verify actual device performance in their specifi c applications.
3 SMJ Transient Voltage Suppressor iode Series Product imensions Recommended ootprint G H imension G H SM (O-214) ( ) ( ) ( ) ( ) ( ) (.2 -.8) ( ) (.3 -.6) imension (Max.) (Min.) (Min.) Physical Specifications IMNSIONS: SM (O-214) 2.7 (.16) 2.1 (.83) 1.27 (.5) (INHS) ase Molded plastic per UL lass 94V- Polarity athode band indicates unidirectional device No cathode band indicates bidirectional device Weight..2 ounces /.64 grams IMNSIONS: (INHS) ustomers should verify actual device performance in their specifi c applications.
4 SMJ Transient Voltage Suppressor iode Series Rating & haracteristic urves Pulse erating urve Non-Repetitive Surge urrent Peak Pulse erating in Percent of Peak Power or urrent x 1 Waveform as efined by R mbient Temperature ( ) Peak orward Surge urrent (mps) Pulse Width 8.3 ms 1 Single Half Sine-Wave (J Method) Number of ycles at 6 Hz Pulse Waveform Typical Junction apacitance I P, Peak Pulse urrent (%) 1 5 TR=1 µs Peak value (IRSM) Half value= IRSM 2 T=25 TP Pulse width (TP) is defined as that point where the peak current decays to 5 % of IPSM. 1 x 1 waveform as defined by R... apacitance (p) idirectional Unidirectional T = T, Time (ms) Pulse Rating urve Standoff Voltage (Volts) Steady State Power erating urve P P, Peak Power (KW) mm Lead reas T = 25 Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph.1.1 µs 1. µs 1 µs 1 µs 1. ms 1 ms RM(V) Steady State Power issipation (W) Hz Resistive or Inductive Load TP, Pulse Width TL, Lead Temperature ( ) ustomers should verify actual device performance in their specifi c applications.
5 N5-54N SMJ Transient - Voltage TVS/Steering Suppressor iode iode rrayseries Packaging Information The product will be dispensed in tape and reel format (see diagram below). P P 1 d Index Hole T 12 W 2 1 P Trailer evice Leader nd 1 pitches (min.) 1 pitches (min.) Start IMNSIONS: (INHS) W 1 irection of eed evices are packed in accordance with I standard RS-481- and specifications shown here. Item Symbol SM (O-214) arrier Width 2.9 ±.1 (.114 ±.4) arrier Length 5.59 ±.1 (.22 ±.4) arrier epth 2.36 ±.1 (.93 ±.4) Sprocket Hole d 1.55 ±.5 (.61 ±.2) Reel Outside iameter 33 (12.992) 5. Reel Inner iameter 1 (1.969) MIN. 13. ±.2 eed Hole iameter 2 (.512 ±.8) Sprocket Hole Position 1.75 ±.1 (.69 ±.4) Punch Hole Position 5.5 ±.5 (.217 ±.2) Punch Hole Pitch P 4. ±.1 (.157 ±.4) 4. ±.1 Sprocket Hole Pitch P (.157 ±.4) 2. ±.5 mbossment enter P 1 (.79 ±.2) Overall Tape Thickness T.3 ±.1 (.12 ±.4) Tape Width W 12. ±.2 (.472 ±.8) 18.4 Reel Width W 1 (.724) MX. Quantity per Reel -- 5, 2/1 ustomers should verify actual device performance in their specifi c applications.
SMBJ Transient Voltage Suppressor Diode Series
*RoHS OMPLINT eatures n RoHS compliant* n Surface Mount SM package n Standoff Voltage: 5 to 495 volts n Power issipation: 600 watts pplications n I 600-4-2 S (Min. Level 4) n I 600-4-4 T n I 600-4-5 Surge
More information1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
.AT3G Series, SZ.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More information1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.
TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > SMAJ series. Description. Features. less than 1μA when V BR.
SMAJ Series RoHS Pb e3 Uni-directional Description Bi-directional The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More information1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.6.8AT3G Series, SZ.6.8AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationuclamp3301d Low Voltage µclamp TM for ESD and CDE Protection PROTECTION PRODUCTS - MicroClamp TM Description Features Mechanical Characteristics
MicroClamp TM Description The µclamp TM series of Transient oltage Suppressors (TS) are designed to replace multilayer varistors (MLs) in portable applications such as cell phones, notebook computers,
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (bi-directional) 6.4 V to 231 V V BR (uni-directional) 6.4 V to 231 V V WM 5.0 V to 188 V P PPM
More informationTeccor brand Thyristors EV Series 0.8 Amp Sensitive SCRs
SxX8xSx Series RoHS escription New device series offers high static dv/dt and lower turn off (t q ) sensitive SR with its small die planar construction design. It is specifically designed for I (round
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),
More informationGreen. Part Number Qualification Case Packaging B1X0Q-13-F Automotive SMA 5,000/Tape & Reel B1X0BQ-13-F Automotive SMB 3,000/Tape & Reel
reen 1.0A SURFAE MOUNT SHOTTKY BARRIER RETIFIER Product Summary B120Q/BQ-B140Q/BQ V RRM (V) I O (A) V F Max (V) I R Max (ma) T A = +25 T A = +25 20/30/40 1.0 0.5 0.5 B150Q/BQ, B160Q/BQ V F Max (V) I R
More informationSurface Mount Schottky Barrier
FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive
More informationRClamp0504P RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationRClamp0821P. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description The RailClamp family is a series of ultra low capacitance Transient oltage Suppressors (TS) designed to protect high speed data interfaces. This series has been specifically designed
More information3EZ6.2D5 Series. 3 Watt DO-41 Surmetic 30 Zener Voltage Regulators
EZ6.D Series Watt DO- Surmetic Zener Voltage Regulators This is a complete series of Watt Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon-oxide
More informationSMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latchup due to ESD and other voltageinduced transient events. They are designed for use in applications
More informationµclamp3601p TVS Diode for Proximity Switch Input Protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics
PRTECTIN PRDUCTS - MicroClamp Description The µclamp P is a high-surge transient voltage suppressor (TVS) optimized for protection of sensitive digital sensors used in proximity switches and industrial
More information1N59xxBRNG Series. 3 W DO-41 Surmetic 30 Zener Voltage Regulators
W DO-4 Surmetic 0 Zener Voltage Regulators This is a N9xxBRNG series with limits and excellent operating characteristics that reflect the superior capabilities of silicon oxide passivated junctions. All
More informationVOIDLESS HERMETICALLY SEALED STANDARD RECOVERY GLASS RECTIFIERS. Qualified to MIL-PRF-19500/420
Available on commercial versions VOIDLESS HERMETICALLY SEALED STANDARD RECOVERY GLASS RECTIFIERS Qualified to MIL-PRF-19500/420 DESCRIPTION This standard recovery rectifier diode series is military qualified
More information10MQ100N SCHOTTKY RECTIFIER. I F(AV) = 2.1Amp V R = 100V. Bulletin PD-20520 rev. M 07/04. Major Ratings and Characteristics. Description/ Features
0MQ00N SCHOTTKY RECTIFIER 2. Amp I F(AV) = 2.Amp V R = 00V Major Ratings and Characteristics Characteristics 0MQ00N Units I F DC 2. A V RRM 00 V I FSM @ tp = 5 µs sine 20 A V F @.5Apk, T =25 C 0.68 V J
More informationSTPS40L15CW. 2 x 20 Amps SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 40Amp V R = 15V. Bulletin PD-20622 rev. B 10/06. Description/ Features
Bulletin PD-20622 rev. B 0/06 STPS40L5CW SCHOTTKY RECTIFIER 2 x 20 Amps I F(AV) = 40Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 40 A waveform V RRM 5
More informationSLVU2.8. PROTECTION PRODUCTS Absolute Maximum Rating. Electrical Characteristics I T I PP V R I PT I F. www.semtech.com. 2008 Semtech Corp.
Description The SL series of transient voltage suppressors are designed to protect low voltage, state-of-the-art MOS semiconductors from transients caused by electrostatic discharge (ESD), cable discharge
More informationCharacteristics Values Units. Rectangular waveform 0.5 A. range - 55 to 150 C
Bulletin I075 rev. C 05/06 IR0530CSPTRPbF 0.5 Amp 30 Volt Features Ultra Low V F To Footprint Area Very Low Profile (
More informationuclamp3301h Low Voltage μclamp TM for ESD and CDE Protection PRELIMINARY Features
PROTECTION PRODUCTS -MicroClamp Description The μclamp series of Transient Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers,
More information1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
More informationLC01-6. Low Capacitance TVS for High-Speed Telecommunication Systems. PROTECTION PRODUCTS Description. Features. Applications
escription The transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge
More informationHigh Performance Schottky Rectifier, 1 A
High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die
More informationSESD Series Ultra Low Capacitance Discrete TVS
SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most
More informationSTIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
More information1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
1SMBAT3G Series, SZ1SMBAT3G Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The SMB series is designed to protect voltage sensitive components from high voltage, high energy
More information1N5820, 1N5821, 1N5822. Axial Lead Rectifiers SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 20, 30, 40 VOLTS
1N58, 1N5821, 1N5822 1N58 and 1N5822 are Preferred Devices Rectifiers This series employs the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
More informationAUTOMOTIVE GRADE. Orderable Part Number AUIRF7805Q SO-8 Tape and Reel 4000 AUIRF7805QTR
UTOMOTIVE GRE UIRF7805Q Features dvanced Planar Technology Low On-Resistance Logic Level N Channel MOSFET Surface Mount vailable in Tape & Reel 150 C Operating Temperature Lead-Free, RoHS Compliant utomotive
More informationAlso Offering RoHs Compliant Equivalent Parts. MA4ST2000 Series V5. Ultra High Ratio Si Hyperabrupt Varactor Diode. Features
eatures Ultra igh apacitance Ratio, (0.1V)/(4.7V) =18:1 (0.1V)/(2.7V) = 12:1 Surface Mount Plastic Packages :,, S-70, 3 Lead SP Process for Superior vs V and Q vs V Repeatability Lead-ree () equivalents
More information1N5817, 1N5818, 1N5819. Axial Lead Rectifiers. SCHOTTKY BARRIER RECTIFIERS 1.0 AMPERE 20, 30 and 40 VOLTS
1N5817 and 1N5819 are Preferred Devices Axial ead Rectifiers This series employs the Schottky Barrier principle in a large area metal to silicon power diode. State of the art geometry features chrome barrier
More informationuclamp0541z Ultra Small μclamp 1-Line ESD Protection
- Z-Pak TM Description μclamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace 2 size multilayer varistors (MLVs) in portable applications
More informationPDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier
More informationSCHOTTKY BARRIER RECTIFIERS 1.0 AMPERE 20, 30 and 40 VOLTS
1N5817 and 1N5819 are Preferred Devices... employing the Schottky Barrier principle in a large area metal to silicon power diode. State of the art geometry features chrome barrier metal, epitaxial construction
More informationDual Common-Cathode Ultrafast Plastic Rectifier
(F,B)6AT thru (F,B)6JT Dual Common-Cathode Ultrafast Plastic Rectifier TO-0AB 6xT PIN PIN 3 PIN CASE 3 TO-63AB ITO-0AB F6xT PIN PIN 3 PIN 3 FEATURES Glass passivated chip junction Ultrafast recovery time
More informationMCC. www.mccsemi.com MMSZ4678 THRU MMSZ4716
omponents 2736 Marilla Street Chatsworth!"# $%!"# MMSZ4678 THRU MMSZ476 Features Zener Voltage.8V-39V Very Sharp Reverse Characteristic VZ tolerance ± 5% High Reliability Epoxy meets UL 94 V- flammability
More informationSTPS20L15DPbF SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 20Amp V R = 15V. Bulletin PD-20873 rev. A 02/07. Major Ratings and Characteristics
STPS20L5DPbF SCHOTTKY RECTIFIER 20 Amps I F(AV) = 20Amp V R = 5V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 20 A waveform V RRM 5 V I FSM @ tp = 5 μs sine 700 A
More informationLC05-6. Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LC5-6 has been specifically designed to protect sensitive components which are connected to highspeed telecommunications lines from over voltages caused by lightning, electrostatic discharge
More information30BQ100PbF SCHOTTKY RECTIFIER. 3 Amp. I F(AV) = 3.0Amp V R = 100V. Bulletin PD-20409 rev. C 01/07. Major Ratings and Characteristics
30BQ00PbF SCHOTTKY RECTIFIER 3 Amp I F(AV) = 3.0Amp V R = 00V Major Ratings and Characteristics Characteristics Values Units I F(AV) Rectangular 3.0 A waveform V RRM 00 V I FSM @ t p = 5 μs sine 800 A
More informationDiode, Schottky SMB/DO-214AA. Page <1> 24/04/08 V1.1. Dimensions Inches (Millimeters)
Features: For surface mounted application. Metal to silicon rectifier, majority carrier conduction. Low forward voltage drop. Easy pick and place. High surge current capability. Plastic material. Epitaxial
More informationA I DM. -55 to + 175 T STG. Storage Temperature Range C Soldering Temperature, for 10 seconds 300 (1.6mm from case) Mounting torque, 6-32 or M3 screw
IGITL UIO MOSFET P 9673 IRFB565PbF Features Key Parameters Optimized for Class udio mplifier pplications Low R SON for Improved Efficiency Low Q G and Q SW for Better TH and Improved Efficiency Low Q RR
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - TO-92. Description
SIACtor Series - TO-92 RoHS Pb e3 escription SIACtor Series TO-92 are designed to protect baseband equipment such as modems, line cards, CPE and SL from damaging overvoltage transients. The series provides
More informationSK54B SCHOTTKY RECTIFIER
Applications: SCHOTTKY RECTIFIER Features: Switching power supply Converters Free-Wheeling diodes Reverse battery protection Disk drives Battery charging Small foot print, surface mountable Very low forward
More informationLC03-6. Low Capacitance TVS for High-Speed Data Interfaces. Features. Description. Mechanical Characteristics. Applications
Description The LC0- transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge
More informationA I DM. W/ C V GS Gate-to-Source Voltage ± 12. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ±2 V * PD - 973A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 2. m R DSon) max @V GS = 2.V) 27. m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
More informationStandard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A
Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single
More informationHFA15TB60 HFA15TB60-1
HEXFRED TM Features Ultrafast Recovery Ultrasoft Recovery Very Low I RRM Very Low Q rr Specified at Operating Conditions Benefits Reduced RFI and EMI Reduced Power Loss in Diode and Switching Transistor
More informationPESDxU1UT series. 1. Product profile. Ultra low capacitance ESD protection diode in SOT23 package. 1.1 General description. 1.
Rev. 02 20 August 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance ElectroStatic Discharge (ESD) protection diode in a SOT23 (TO-236AB) small SMD plastic package
More informationSchottky Rectifier, 1 A
Schottky Rectifier, 1 A BQPbF FEATURES SMB Cathode Anode Small foot print, surface mountable Low forward voltage drop High frequency operation Available RoHS* COMPLIANT Guard ring for enhanced ruggedness
More informationESD9X3.3ST5G Series, SZESD9X3.3ST5G Series. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection
ESD9X3.3ST5G Series, SZESD9X3.3ST5G Series Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD9X Series is designed to protect voltage sensitive components from ESD. Excellent
More informationHow To Make An Electric Static Discharge (Esd) Protection Diode
Rev. 01 0 October 2008 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance bidirectional ElectroStatic Discharge (ESD) protection diodes in small Surface-Mounted Device
More informationRClamp0522P RClamp0524P
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
More informationSM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
More informationI T(AV) off-state voltages. PINNING - TO92 variant PIN CONFIGURATION SYMBOL. 3 anode g
BT9 series GENERL DESCRIPTION QUICK REFERENCE DT Passivated, sensitive gate thyristors in a SYMBOL PRMETER MX. MX. MX. UNIT plastic envelope, intended for use in general purpose switching and phase BT9
More informationPINNING - TO220AB PIN CONFIGURATION SYMBOL
BTA4 series GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated triacs in a plastic envelope, SYMBOL PARAMETER MAX. MAX. UNIT intended for use in applications requiring high bidirectional transient and
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ040-M3 Cathode Anode PRODUCT SUMMARY Package SMB I F(AV) 1.0 A V R 40 V V F at I F 0.38 V I RM 9 ma at 125 C T J max. 150 C Diode variation Single die E AS 3.0 mj FEATURES
More informationMT..KB SERIES 55 A 90 A 110 A THREE PHASE CONTROLLED BRIDGE. Power Modules. Features. Description. Major Ratings and Characteristics
MT..KB SERIES THREE PHASE CONTROLLED BRIDGE Power Modules Features Package fully compatible with the industry standard INT-A-pak power modules series High thermal conductivity package, electrically insulated
More informationCAN bus ESD protection diode
Rev. 04 15 February 2008 Product data sheet 1. Product profile 1.1 General description in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller
More informationA I DM. W/ C V GS Gate-to-Source Voltage ± 20. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ± 2 V R DSon) max @V GS = V) 24 m * PD - 9787A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 4 m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
More informationMCR08B, MCR08M. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 0.8 AMPERES RMS 200 thru 600 VOLTS
MCR8B, MCR8M Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls,
More informationHigh Performance Schottky Rectifier, 3.0 A
High Performance Schottky Rectifier, 3. A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3. A V R 4 V V F at I F.46 V I RM 3 ma at 25 C T J max. 5 C Diode variation Single die E AS 6. mj FEATURES
More informationData Sheet. HSMP-382x, 482x. Surface Mount RF PIN Switch and Limiter Diodes. Features. Description/Applications
HSMP-382x, 482x Surface Mount RF PIN Switch and Limiter iodes ata Sheet escription/applications The HSMP-382x series is optimized for switch ing applications where ultra-low resistance is required. The
More informationRClamp0502BA. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
More informationHigh Performance Schottky Rectifier, 1.0 A
High Performance Schottky Rectifier, 1. A VS-BQ3-M3 Cathode Anode SMB PRODUCT SUMMARY Package SMB I F(AV) 1. A V R 3 V V F at I F.42 V I RM max. 15 ma at 125 C T J max. 15 C Diode variation Single die
More informationA1301 and A1302. Continuous-Time Ratiometric Linear Hall Effect Sensor ICs
Features and enefits Low-noise output Fast power-on time Ratiometric rail-to-rail output 4.5 to 6.0 V operation Solid-state reliability Factory-programmed at end-of-line for optimum performance Robust
More informationC650 and C850 Series TBU High-Speed Protectors
*RoHS COMPLIANT Features Formerly brand Extremely high speed performance Blocks high voltages and currents Very high bandwidth; GHz compatible Small package, minimal PCB area Simple, superior circuit protection
More informationAUIRLR2905 AUIRLU2905
Features dvanced Planar Technology Logic Level Gate Drive Low On-Resistance Dynamic dv/dt Rating 175 C Operating Temperature Fast Switching Fully valanche Rated Repetitive valanche llowed up to Tjmax Lead-Free,
More informationFeatures Benefits Description TO-247AC (Modified) Absolute Maximum Ratings Parameter Max Units
Bulletin PD -.338 rev. B /4 HEXFRED TM HFA5PB6 Ultrafast, Soft Recovery Diode Features Ultrafast Recovery Ultrasoft Recovery Very Low I RRM Very Low Q rr Specified at Operating Conditions Benefits Reduced
More informationNUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3.
Low Capacitance Surface Mount TVS for High-Speed Data Interfaces The NUP0 transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD and lightning.
More informationHigh-speed switching diodes. Type number Package Configuration Package NXP JEITA JEDEC
Rev. 8 18 November 2010 Product data sheet 1. Product profile 1.1 General description, encapsulated in small Surface-Mounted Device (SMD) plastic packages. Table 1. Product overview Type number Package
More informationStandard Recovery Diodes, (Stud Version), 40 A
Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-203AB (DO-5) PRODUCT SUMMARY I F(A) 40 A Package
More informationFeatures. P-Channel Enhancement Mode MOSFET
P-Channel Enhancement Mode MOSFET Features Pin Description -4V/-25, R DS(ON) = 4mΩ (typ.) @ V GS = -V R DS(ON) = 55mΩ (typ.) @ V GS = -5V Super High Dense Cell Design G D S Reliable and Rugged Lead Free
More informationNUP2105L, SZNUP2105L. Dual Line CAN Bus Protector SOT 23 DUAL BIDIRECTIONAL VOLTAGE SUPPRESSOR 350 W PEAK POWER
Dual Line CAN Bus Protector The SZ/NUP215L has been designed to protect the CAN transceiver in high speed and fault tolerant networks from ESD and other harmful transient voltage events. This device provides
More informationLC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS
Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.
More information19TQ015PbF. 19 Amp SCHOTTKY RECTIFIER. Case Styles. I F(AV) = 19Amp V R = 15V. Bulletin PD-20840 rev. B 04/06. Major Ratings and Characteristics
Bulletin PD-0840 rev. B 04/06 9TQ05PbF SCHOTTKY ECTIFIE 9 Amp I F(A) = 9Amp = 5 Major atings and Characteristics Characteristics alues Units I F(A) ectangular 9 A waveform M 5 I FSM @ tp = 5 μs sine 700
More informationMMSZxxxT1G Series, SZMMSZxxxT1G Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZxxxTG Series, SZMMSZxxxTG Series Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices
More informationSchottky Rectifier, 1.0 A
Schottky Rectifier, 1.0 A VS-BQ060PbF Vishay High Power Products FEATURES Small foot print, surface mountable Low forward voltage drop SMB Cathode Anode High frequency operation Guard ring for enhanced
More information5STP 21H4200 Old part no. TV 989-2100-42
Phase Control Thyristor Properties 5STP 1H Old part no. T 989-1- Key Parameters High operational capability DRM, RRM = Possibility of serial and parallel connection I TAm = 19 A Applications I TSM = 3
More informationIRLR8729PbF IRLU8729PbF
Applications l High Frequency Synchronous Buck Converters for Computer Processor Power l High Frequency Isolated DC-DC Converters with Synchronous Rectification for Telecom and Industrial Use Benefits
More informationSchottky Rectifier, 100 A
Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES
More informationAUTOMOTIVE GRADE. Base part number Package Type Standard Pack Orderable Part Number
UTOMOTVE GRDE URG4P40S-E nsulated Gate Bipolar Transistor Features V ES = 600V Standard: Optimized for minimum saturation voltage and low operating frequencies ( < khz) Generation 4 GBT design provides
More informationRClamp0522PA RClamp0524PA
PROTECTION PRODUCTS - RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed
More informationHow To Test A Sidactor Series For A Power Supply
SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.
More informationHIGH VOLTAGE TEMPERATURE COMPENSATED ZENER REFERENCE DIODES
Available HIGH VOLTAGE TEMPERATURE COMPENSATED ZENER REFERENCE DIODES DESCRIPTION The 1N4057 through 1N4085A series of temperature compensated reference diodes provides a wide selection of nominal voltages
More informationBAT64... BAT64-02W BAT64-02V BAT64-04 BAT64-04W BAT64-05 BAT64-05W BAT64-06W
Silicon Schottky Diodes For low-loss, fast-recovery, meter protection, bias isolation and clamping application Integrated diffused guard ring Low forward voltage Pb-free (RoHS compliant) package Qualified
More informationlogic level for RCD/ GFI/ LCCB applications
logic level for RCD/ GFI/ LCCB applications BT68GW GENERL DESCRIPTION QUICK REFERENCE DT Passivated, sensitive gate thyristor in a plastic SYMBOL PRMETER MX. UNIT envelope suitable for surface mounting,
More informationBZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
More informationFemtofarad bidirectional ESD protection diode
Rev. 3 24 October 2011 Product data sheet 1. Product profile 1.1 General description Femtofarad bidirectional ElectroStatic Discharge (ESD) protection diode in a leadless ultra small SOD882 Surface-Mounted
More informationTable 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit Per diode V F forward voltage I F =10mA
Rev. 03 9 June 2009 Product data sheet 1. Product profile 1.1 General description General-purpose Zener diodes in a SOT23 (TO-236AB) small Surface-Mounted Device (SMD) plastic package. 1.2 Features Non-repetitive
More informationlogic level for RCD/ GFI/ LCCB applications
logic level for RCD/ GFI/ LCCB applications BT68W series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. MAX. MAX. UNIT thyristors in a plastic envelope
More informationACTP250J1BJ AC Transient Protector
*RoHS COMPLIANT ACTP250J1BJ BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS ACTP250J1BJ AC Transient Protector Designed to withstand a 2.5 kv (1.2/50 voltage, 8/20 current) combination wave surge per IEC
More informationTPI. Tripolar protection for ISDN interfaces. Features. Description. Complies with following standards. Benefits
Tripolar protection for ISDN interfaces Features Bidirectional triple crowbar protection Peak pulse current: I PP = 30, 10/1000 µs Breakdown voltage: TPI80N: 80 V TPI120N: 120 V vailable in SO-8 package
More informationMBR2045CT SCHOTTKY BARRIER RECTIFIER 20 AMPERES 45 VOLTS
Preferred Device... using the Schottky Barrier principle with a platinum barrier metal. These state of the art devices have the following features: Guardring for Stress Protection Low Forward Voltage 150
More information1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007. Axial Lead Standard Recovery Rectifiers
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 Axial ead Standard Recovery Rectifiers This data sheet provides information on subminiature size, axial lead mounted rectifiers for general purpose
More informationlogic level for RCD/ GFI applications
logic level for RCD/ GFI applications BT68 series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. MAX. MAX. UNIT thyristors in a plastic envelope, intended
More informationP6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
More information