SIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Series - TO-92. Description
|
|
- Elinor Manning
- 7 years ago
- Views:
Transcription
1 SIACtor Series - TO-92 RoHS Pb e3 escription SIACtor Series TO-92 are designed to protect baseband equipment such as modems, line cards, CPE and SL from damaging overvoltage transients. The series provides a robust through-hole solution that enables equipment to comply with global regulatory standards. Features and Benefits Agency Approvals Agency Agency File Number E13383 Low voltage overshoot Low on-state voltage oes not degrade surge capability after multiple surge events within limit. Fails short circuit when surged in excess of ratings Low capacitance 2nd level interconnect is Pb-free per IPC/ JEEC J-ST-69A.1 Pinout esignation Schematic Symbol Pin 1 Pin 3 Applicable Global Standards TIA-968-A TIA-968-B ITU K.2/21 Enhanced Level* ITU K.2/21 Basic Level GR 189 Inter-building* GR 189 Intra-building IEC Y/T 182 Y/T 993 Y/T 95 * A/B-rated parts require series resistance Electrical =2.2 Amps 2V bias Part Number Marking V min V max ma min ma max A max V max pf min pf max P8EALxxx P8EA P3EALxxx P3EA P64EALxxx P64EA P72EALxxx P72EA P9EALxxx P9EA P11EALxxx P11EA P13EALxxx P13EA P15EALxxx P15EA P18EALxxx P18EA P23EALxxx P23EA P26EALxxx P26EA P31EALxxx P31EA P35EALxxx P35EA Table continues on next page.
2 Electrical Characteristics (continued Part Number =2.2 Amps 2V bias V Min V Max ma Min ma Max A Max V Max pf Min pf Max P8EBLxxx P8EB P3EBLxxx P3EB P64EBLxxx P64EB P72EBLxxx P72EB P9EBLxxx P9EB P11EBLxxx P11EB P13EBLxxx P13EB P15EBLxxx P15EB P18EBLxxx P18EB xxx P23EB P26EBLxxx P26EB P31EBLxxx P31EB P35EBLxxx P35EB P8ECLxxx P8EC P3ECLxxx P3EC P64ECLxxx P64EC P72ECLxxx P72EC P9ECLxxx P9EC P11ECLxxx P11EC P13ECLxxx P13EC P15ECLxxx P15EC P18ECLxxx P18EC P23ECLxxx P23EC P26ECLxxx P26EC P31ECLxxx P31EC P35ECLxxx P35EC Absolute maximum ratings measured at T A = 25ºC (unless otherwise noted. - evices are bi-directional (unless otherwise noted. - xxx part number suffix: AP = Ammo Pack, RP1 and RP2 = Reel Pack, blank = Bulk Pack Surge Ratings Series I PP.2x31 1 2x1 1 8x2 1 1x16 1 1x56 1 5x32 1 1x36 1 1x1 1 5x31 1.5x7 2 2x x5 2 1x16 2 1x56 2 9x72 2 1x36 2 1x1 2 1x7 2 ITSM 5/6 Hz A min A min A min A min A min A min A min A min A min A min A/µs max A di/dt B C Current waveform in µs 2 Voltage waveform in µs - Peak pulse current rating (I PP is repetitive and guaranteed for the life of the product that remains in thermal equilibrium. - I PP ratings applicable over temperature range of -4ºC to +85ºC - The device must initially be in thermal equilibrium with -4 C < T J < +15 C Thermal Considerations Package Symbol Parameter Value Unit TO-92 T J Operating Junction Temperature Range -4 to +15 C T S Storage Temperature Range -65 to +15 C R JA Thermal Resistance: Junction to Ambient 9 C/W
3 Temperature SIACtor Protection Thyristors V-I Characteristics t r x t d Pulse Waveform +I -V I RM -I +V IPP Peak Pulse Current %IPP 1 5 t r Peak Value Waveform = t r x t d t d t r = rise time to peak value t d = decay time to half value Half Value t Time (µs Normalized Change vs. Junction Temperature Normalized C Holding Current vs. Case Temperature Percent of Change % C Junction Temperature (T J C (T C = 25ºC Ratio of C Case Temperature (T C - ºC Soldering Parameters Reflow Condition Pb-Free assembly (see Fig. 1 - Temperature Min (T s(min +15 C Pre Heat - Temperature Max (T s(max +2 C - Time (Min to Max (t s 6-18 secs. Average ramp up rate (Liquidus Temp (T L to peak 3 C/sec. Max. T S(max to T L - Ramp-up Rate 3 C/sec. Max. Reflow - Temperature (T L (Liquidus +217 C - Temperature (t L 6-15 secs. T P T L T S(max T S(min Preheat t S Figure 1 Ramp-up t P t L Critical Zone TL to TP Ramp-down Peak Temp (T P Time within 5 C of actual Peak Temp (t p Ramp-down Rate Time 25 C to Peak Temp (T P o not exceed +26(+/-5 C 3 secs. Max. 6 C/sec. Max. 8 min. Max. +26 C 25 time to peak temperature (t 25ºC to peak Time
4 Physical Specifications Environmental Specifications Lead Material Terminal Finish Body Material Copper Alloy 1% Matte-Tin Plated UL recognized epoxy meeting flammability classification 94V- High Temp Voltage Blocking Temp Cycling Biased Temp & Humidity 8% Rated (V AC Peak +125 C or +15 C, 54 or 18 hrs. MIL-ST-75 (Method 14 JEEC, JES22-A C to +15 C, 15 min. dwell, 1 up to 1 cycles. MIL-ST-75 (Method 151 EIA/JEEC, JES22-A14 52 V C (+85 C 85%RH, 54 up to 18 hrs. EIA/ JEEC, JES22-A-11 High Temp Storage +15 C 18 hrs. MIL-ST-75 (Method 131 JEEC, JES22-A-11 Low Temp Storage -65 C, 18 hrs. Thermal Shock C to +1 C, 5 min. dwell, 1 sec. transfer, 1 cycles. MIL-ST-75 (Method 156 JEEC, JES22-A-16 Autoclave (Pressure Cooker Test +121 C, 1%RH, 2atm, 24 up to 168 hrs. EIA/ JEEC, JES22-A-12 Resistance to Solder Heat +26 C, 3 secs. MIL-ST-75 (Method 231 Moisture Sensitivity Level 85%RH, +85 C, 168 hrs., 3 reflow cycles (+26 C Peak. JEEC-J-ST-2, Level 1 Part Numbering Part Marking TYPE P = SIACtor MEIAN VOLTAGE CONSTRUCTION VARIABLE PACKAGE TYPE P xxx ExLxxx PACKING OPTIONS RoHS COMPLIANT I PP RATING XXXXXXX XX XXXXX Part Marking Code (Refer to Electrical Characteristics Table ate Code Packing Options Package Type escription Packing Options Quantity Added Suffix Lead Spacing Industry Standard E RP1.1 inch (2.54mm TO-92 Tape and Reel Pack EIA-481- RP2.2 inch (5.8mm 2 TO-92 Ammo Pack AP EIA-468-B TO-92 Bulk Pack N/A N/A Additional Information atasheet Resources Samples
5 imensions TO-92 Ammo Pack Specification TO-92 MT1/PIN 1 M L Temperature Measurement Point E K J MT2/PIN 3 The TO-92 is designed to meet mechanical standards as set forth in JEEC publication number 95. H N A B G Min Max Min Max A B E G H J K L M N All leads are insulated from case. Case is electrically non-conductive. (Rated at 16 V (AC RMS for one minute from leads to case over the operating temperature range. Mold flash shall not exceed.13 mm per side (41.2 (6. MAX.78 (18..2 ( (9..5 ( (12.7 irection of Feed imensions are in inches (and millimeters ( ( ( (3.2 MAX 1.27 ( evices per fold.157 IA (4. Flat down 1.7 ( ( (43 Tape and Reel Specification TO-92 FLAT SIE OF TO-92 imensions Min Max Min Max A N/A N/A 36. B 4.16 N/A 12. N/A A C B W1 C N/A 86. N/A.795 N/A 2.2 N/A W P P ROUN SIE OF TO-92 P F(for RP F(for RP H H1 W2 W W3 W4 (RP1 (RP2 H N/A N/A 42.5 H1 N/A 1.27 N/A W W W3.236 N/A 6. N/A P F F W4.2 N/A.5 N/A imension Minimum Maximum Minimum Maximum A N/A N/A 36. B 4.16 N/A 12. N/A C N/A 86. N/A Specifications.795 are subject N/A to change without 2.2 notice. N/A W P
How To Test A Sidactor Series For A Power Supply
SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
More informationSM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
More informationGas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
More informationSESD Series Ultra Low Capacitance Discrete TVS
SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most
More informationC650 and C850 Series TBU High-Speed Protectors
*RoHS COMPLIANT Features Formerly brand Extremely high speed performance Blocks high voltages and currents Very high bandwidth; GHz compatible Small package, minimal PCB area Simple, superior circuit protection
More informationTeccor brand Thyristors EV Series 0.8 Amp Sensitive SCRs
SxX8xSx Series RoHS escription New device series offers high static dv/dt and lower turn off (t q ) sensitive SR with its small die planar construction design. It is specifically designed for I (round
More informationFeatures. Applications. Truth Table. Close
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
More informationLC01-6. Low Capacitance TVS for High-Speed Telecommunication Systems. PROTECTION PRODUCTS Description. Features. Applications
escription The transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SDC15 transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD),
More informationSTIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More information0.185 (4.70) 0.170 (4.31) 0.055 (1.39) 0.045 (1.14) Features 0.603 (15.32) 0.573 (14.55) 0.104 (2.64) 0.094 (2.39)
*.6 (4.6).9 (2.28).25 (5.2).9 (4.83).45 (.54) Max..4 (.4).35 (8.89).54 (3.9).42 (3.6) ia. PIN S.48 (29.6).8 (28.4) * May be notched or flat.3 (2.87).2 (2.56).635 (6.3).58 (4.73).37 (.94).26 (.66).5 (2.67).95
More informationFLC21-135A LOW POWER FIRE LIGHTER CIRCUIT. Application Specific Discretes A.S.D.
Application Specific iscretes A.S.. LC21-135A LOW POWER IRE LIGHTER CIRCUIT EATURES EICATE THYRISTOR STRUCTURE OR CAPACITIVE ISCHARGE IGNITION OPERATION HIGH PULSE CURRENT CAPABILITY I RM =90A @ tp=10µs
More informationTISP4600F3, TISP4700F3 OBSOLETE
*RoHS COMPLIANT TISP4600F3, TISP4700F3 HIGH OLTAGE BIDIRECTIONAL THYRISTOR OEROLTAGE PROTECTORS TISP4600F3, TISP4700F3 Ion-Implanted Breakdown Region Precise and Stable oltage Low oltage Overshoot under
More informationLC05-6. Dual Low Capacitance TVS Array for Telecom Line-Card Applications. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The LC5-6 has been specifically designed to protect sensitive components which are connected to highspeed telecommunications lines from over voltages caused by lightning, electrostatic discharge
More informationACTP250J1BJ AC Transient Protector
*RoHS COMPLIANT ACTP250J1BJ BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS ACTP250J1BJ AC Transient Protector Designed to withstand a 2.5 kv (1.2/50 voltage, 8/20 current) combination wave surge per IEC
More informationS112-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description Features The S112-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor
More informationN-Channel 30-V (D-S) MOSFET
Si3456V N-Channel 3-V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) (Ω) I (A) d Q g (Typ.) 3.4 at V GS = V 6.3.5 at V GS = 4.5 V 5.7 TSOP-6 Top View.8 nc FEATURES Halogen-free According to IEC 649-- efinition
More informationA I DM. W/ C V GS Gate-to-Source Voltage ± 20. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ± 2 V R DSon) max @V GS = V) 24 m * PD - 9787A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 4 m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
More informationDSL03. Low capacitance TVS for high speed lines such as xdsl. Description. Features. Complies with the following standards
Low capacitance TVS for high speed lines such as xdsl Description Datasheet - production data Features High surge capability to comply with GR-1089 and ITU-T K20/21 Keeps its peak power capability up to
More informationSpezifikation für Freigabe / specification for release
Artikelnummer / part number : 82550350 Datum / Date : 31.07.06 description : 0805 SMD VARISTOR Lead Free SMD size: 0805 ROHS Compliant A Mechanische Abmessungen / dimensions : SIZE SIZE W L T a 0402 0.5
More information1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.
TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive
More informationRClamp0502BA. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
More informationPDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier
More informationBTA40, BTA41 and BTB41 Series
BTA4, BTA41 and BTB41 Series STANDARD 4A TRIACS Table 1: Main Features Symbol Value Unit I T(RMS) 4 A V DRM /V RRM 6 and 8 V I T (Q1 ) 5 ma DESCRIPTION Available in high power packages, the BTA/ BTB4-41
More informationOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
More informationA I DM. W/ C V GS Gate-to-Source Voltage ± 12. Thermal Resistance Symbol Parameter Typ. Max. Units
V DS 2 V V GS Max ±2 V * PD - 973A HEXFET Power MOSFET R DSon) max @V GS = 4.V) 2. m R DSon) max @V GS = 2.V) 27. m 6 Micro3 TM SOT-23) Applications) Load System Switch Features and Benefits Features Benefits
More informationSurface Mount Schottky Barrier
FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Moisture sensitivity level: level, per J-STD-020 - Compliant to RoHS Directive
More informationOptocoupler, Phototransistor Output, AC Input
Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have
More informationFeatures. Case: TO-220-3 (2), TO-220F-3 (Option 1), TO-252-2 (1) and TO- 263-2 Power Management Instrumentation
HIGH VOLTAGE POWER SCHOTTKY RECTIFIER Product Summary V F (MAX) (V) I R (MAX) (ma) V RRM (V) I O (A) @ +25 C @ +25 C 100 2x10 0.85 0.1 Description High voltage dual Schottky rectifier suited for switch
More informationY.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
More informationASSR-1410, ASSR-1411 and ASSR-1420 General Purpose, Form A, Solid State Relay (Photo MOSFET) (60V/0.6A/1Ω) Features. Applications. Truth Table.
ASSR-, ASSR- and ASSR- General Purpose, Form A, Solid State Relay (Photo MOSFET) (V/.A/Ω) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free
More informationDOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
More informationFeatures. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
More informationLC03-6. Low Capacitance TVS for High-Speed Data Interfaces. Features. Description. Mechanical Characteristics. Applications
Description The LC0- transient voltage suppressor is designed to protect components which are connected to high speed telecommunication lines from voltage surges caused by lightning, electrostatic discharge
More informationEVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
More informationFeatures. P-Channel Enhancement Mode MOSFET
P-Channel Enhancement Mode MOSFET Features Pin Description -4V/-25, R DS(ON) = 4mΩ (typ.) @ V GS = -V R DS(ON) = 55mΩ (typ.) @ V GS = -5V Super High Dense Cell Design G D S Reliable and Rugged Lead Free
More informationTISP4500H3BJ Overvoltage Protector
*RoHS COMPLINT TISP4500H3BJ BIDIRECTIONL THYRISTOR OVERVOLTGE PROTECTORS TISP4500H3BJ Overvoltage Protector Non-Conductive During K.20/21/45 Power Contact Test - Off-State Voltage... >245 V rms - For Controlled
More informationWE-LF SMD Common Mode Power Line Choke
A Dimensions: [mm] B Recommended hole pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 10 khz/ 0.1 ma L 2x 6.8 mh ±30% Rated current @ 70 C I R 1.0 A max. DC
More informationP6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
More informationRoHS Compliant Containing no Lead, no Bromide and no Halogen. IRF9310PbF SO8 Tube/Bulk 95 IRF9310TRPbF SO8 Tape and Reel 4000
PD 97437A IRF93PbF HEXFET Power MOSFET V DS 30 V R DS(on) max (@V GS = V) I D (@T A = 25 C) 4. mω 20 A * SO8 Applications Charge and Discharge Switch for Notebook PC Battery Application Features and Benefits
More information4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
More informationBZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
More informationPIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages
DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
More informationIRF6201PbF. HEXFET Power MOSFET V DS 20 V. R DS(on) max. 2.75 mω. Q g (typical) 130 nc 27 A. Absolute Maximum Ratings
PD - 97500A IRF620PbF V DS 20 V HEXFET Power MOSFET R DS(on) max (@ = 4.5V) 2.45 mω 6 R DS(on) max (@ = 2.5V) 2.75 mω 6 6 Q g (typical) 30 nc * SO-8 I D (@T A = 25 C) 27 A Applications OR-ing or hot-swap
More informationVOIDLESS HERMETICALLY SEALED STANDARD RECOVERY GLASS RECTIFIERS. Qualified to MIL-PRF-19500/420
Available on commercial versions VOIDLESS HERMETICALLY SEALED STANDARD RECOVERY GLASS RECTIFIERS Qualified to MIL-PRF-19500/420 DESCRIPTION This standard recovery rectifier diode series is military qualified
More informationDSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards
-xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits
More informationRClamp0504P RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamps are low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected
More informationOptocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
More informationSMF05C. TVS Diode Array For ESD and Latch-Up Protection PRELIMINARY. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The SMF series TVS arrays are designed to protect sensitive electronics from damage or latchup due to ESD and other voltageinduced transient events. They are designed for use in applications
More informationSilicon PIN Photodiode with Daylight Blocking Filter Version 1.4 BP 104 FS
216-3-3 Silicon PIN Photodiode with Daylight Blocking Filter Version 1.4 BP 14 FS Features: Especially suitable for applications of 95 nm Short switching time (typ. 2 ns) DIL plastic package with high
More information3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
More informationAxial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
More informationDSC1001. Low-Power Precision CMOS Oscillator 1.8~3.3V. Features. General Description. Benefits. Block Diagram
DSC.8~.V LowPower Precision CMOS Oscillator General Description The DSC is a silicon MEMS based CMOS oscillator offering excellent jitter and stability performance over a wide range of supply voltages
More informationSuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal
SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode
More informationlogic level for RCD/ GFI applications
logic level for RCD/ GFI applications BT68 series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. MAX. MAX. UNIT thyristors in a plastic envelope, intended
More informationData Sheet. HSMP-382x, 482x. Surface Mount RF PIN Switch and Limiter Diodes. Features. Description/Applications
HSMP-382x, 482x Surface Mount RF PIN Switch and Limiter iodes ata Sheet escription/applications The HSMP-382x series is optimized for switch ing applications where ultra-low resistance is required. The
More informationCAN bus ESD protection diode
Rev. 04 15 February 2008 Product data sheet 1. Product profile 1.1 General description in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationApplication Note AN-0994 Maximizing the Effectiveness of your SMD Assemblies
Application Note AN-0994 Maximizing the Effectiveness of your SMD Assemblies Table of Contents Page Method...2 Thermal characteristics of SMDs...2 Adhesives...4 Solder pastes...4 Reflow profiles...4 Rework...6
More informationSilicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
More informationOptocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
More informationAdvanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of 1A Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
More informationETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards
ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved
More informationlogic level for RCD/ GFI/ LCCB applications
logic level for RCD/ GFI/ LCCB applications BT68W series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. MAX. MAX. UNIT thyristors in a plastic envelope
More information1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
.AT3G Series, SZ.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationµclamp3601p TVS Diode for Proximity Switch Input Protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics
PRTECTIN PRDUCTS - MicroClamp Description The µclamp P is a high-surge transient voltage suppressor (TVS) optimized for protection of sensitive digital sensors used in proximity switches and industrial
More informationCMS Common mode inductors, surface mount
Technical Data 4313 Effective October 215 Supersedes March 27 Common mode inductors, surface mount pplications EMI filters DC-DC brick power supplies Discrete output supplies Discrete and point-of-use
More informationSpezifikation für Freigabe / specification for release
Artikelnummer / part number : 82380050100 Datum / Date : 2006-08-01 ROHS Compliant A Mechanische Abmessungen / dimensions : b SIZ Size L T a b min/max min/max min/max min/max 0508 1.05/1.35 1.85 /2.15
More informationSchottky Rectifier, 1 A
Schottky Rectifier, 1 A BQPbF FEATURES SMB Cathode Anode Small foot print, surface mountable Low forward voltage drop High frequency operation Available RoHS* COMPLIANT Guard ring for enhanced ruggedness
More informationSURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
More informationTISP9110LDM Overvoltage Protector
*RoHS COMPLINT TISP9110LDM INTEGRTED COMPLEMENTRY BUFFERED-GTE SCRS FOR DUL POLRITY SLIC OEROLTGE PROTECTION TISP9110LDM Overvoltage Protector High Performance Protection for SLICs with +ve and -ve Battery
More informationDDSL01. Secondary protection for DSL lines. Features. Description
Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description
More information1 Form A Solid State Relay
Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package
More informationBTA12, BTB12, T12xx. 12 A Snubberless, logic level and standard triacs. Features. Applications. Order code. Description
12 A Snubberless, logic level and standard triacs Features Medium current triac Low thermal resistance with clip bonding Low thermal resistance insulation ceramic for insulated BTA High commutation (4Q)
More informationSilicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
More informationST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
More informationWE-CBF SMD EMI Suppression Ferrite Bead
A Dimensions: [mm] B Recommended land pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Impedance @ 100 MHz 100 MHz Z 600 Ω ±25% Maximum impedance 80 MHz Z 650 Ω typ. Rated
More informationLC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS
Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.
More information0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
More informationSM6T. Transil. Features. Description. Complies with the following standards. Peak pulse power: 600 W (10/1000 µs).
Transil Features Peak pulse power: 600 W (10/1000 µs) 4 kw (8/20 µs) Breakdown voltage range: from 6.8 V to 220 V Unidirectional and bidirectional types Low leakage current: 0.2 µa at 25 C 1 µa at 85 C
More informationBTW67 and BTW69 Series
BTW67 and BTW69 Series STNDRD 50 SCRs MIN FETURES: Symbol Value Unit I T(RMS) 50 V DRM /V RRM 600 to 1200 V G K I GT 80 m G K DESCRIPTION vailable in high power packages, the BTW67 / BTW69 Series is suitable
More informationPINNING - TO220AB PIN CONFIGURATION SYMBOL
BTA4 series GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated triacs in a plastic envelope, SYMBOL PARAMETER MAX. MAX. UNIT intended for use in applications requiring high bidirectional transient and
More informationData Sheet. ACPL-077L Low Power 3.3 V / 5 V High Speed CMOS Optocoupler Design for System Level Reliability. Description. Features. Functional Diagram
ACPL-077L Low Power 3.3 V / 5 V High Speed CMOS Optocoupler Design for System Level Reliability Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes
More informationTPI. Tripolar protection for ISDN interfaces. Features. Description. Complies with following standards. Benefits
Tripolar protection for ISDN interfaces Features Bidirectional triple crowbar protection Peak pulse current: I PP = 30, 10/1000 µs Breakdown voltage: TPI80N: 80 V TPI120N: 120 V vailable in SO-8 package
More informationCharacteristics Values Units. Rectangular waveform 0.5 A. range - 55 to 150 C
Bulletin I075 rev. C 05/06 IR0530CSPTRPbF 0.5 Amp 30 Volt Features Ultra Low V F To Footprint Area Very Low Profile (
More informationSIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
More informationEdixeon S White Series Datasheet
Edixeon S White Series Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright
More informationLow Current SMD LED PLCC-2
Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to
More informationContents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
More informationRClamp0514M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features
RailClamp Description RailClamps are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
More informationFeatures. Applications. Luminous Intensity, Iv (mcd) @ 20 ma. Typical Viewing Angle [1] (degrees), 2q 1/2
HLMP-Cx8 Series, HLMP-Cx25 Series HLMP-Cx27 Series, HLMP-C61 T-1 3 / 4 (5 mm) AlInGaP Lamps Data Sheet Description The HLMP-Cx8, HLMP-Cx25, HLMP-Cx27, and HLMP-C61 series are 5 mm lamps specially designed
More informationThick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
More informationPESDxU1UT series. 1. Product profile. Ultra low capacitance ESD protection diode in SOT23 package. 1.1 General description. 1.
Rev. 02 20 August 2009 Product data sheet 1. Product profile 1.1 General description Ultra low capacitance ElectroStatic Discharge (ESD) protection diode in a SOT23 (TO-236AB) small SMD plastic package
More informationMedium power Schottky barrier single diode
Rev. 03 17 October 2008 Product data sheet 1. Product profile 1.1 General description Planar medium power Schottky barrier single diode with an integrated guard ring for stress protection, encapsulated
More informationP-Channel 20 V (D-S) MOSFET
Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According
More information10MQ100N SCHOTTKY RECTIFIER. I F(AV) = 2.1Amp V R = 100V. Bulletin PD-20520 rev. M 07/04. Major Ratings and Characteristics. Description/ Features
0MQ00N SCHOTTKY RECTIFIER 2. Amp I F(AV) = 2.Amp V R = 00V Major Ratings and Characteristics Characteristics 0MQ00N Units I F DC 2. A V RRM 00 V I FSM @ tp = 5 µs sine 20 A V F @.5Apk, T =25 C 0.68 V J
More information