V50... V53 Series, 3/2, 5/2 or 5/3 Solenoid actuated and pilot operated spool valve
|
|
|
- Tabitha Blake
- 7 years ago
- Views:
Transcription
1 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve > > ort size: /8... /2 (I /) > > igh flow in-line valves > > lexible in-line and manifold mounting options > > ompact and robust design > > ow power energy efficient solenoids echnical features edium: ompressed air, filtered (40 µm) lubricated or non lubricated peration: oftseal spool valve, solenoid and pilot actuated ort size: /8, /4, /8, /2 ounting position: In-line or sub-base perating pressure: etails of minimum and maximum pressure see overleaf. low: ee tables overleaf mbient/edia temperature: ilot models: ( ) olenoid models: ( ); ir supply must be dry enough to avoid ice formation at temperatures below +2 (+5 ). aterials: ody/sub-base: die-cast aluminium alloy or aluminium alloy, white painted oftseal spool: /aluminium alloy ounting sheets/screws: steel prings: stainless steel lectrical details for solenoid operators oltage tolerance ± 0% ating Inlet orifice lectrical connection (corresponding to choosen coil) 00% continuous duty 0,6 mm; 50 0,8 mm; orm ; 5 mm; 50 olenoid coil mounting our positions x 90 anual override rotection class Industrial tandard; 22 mm; ush and turn to lock (plastic) I 65 (with sealed plug) without notice, the specifications given in this document. ( d) 205 orgren mb en
2 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve echnical data, /2 and 5/2 way valves, solenoid actuated, standard models ymbol unction ort size ctuation/ return ilot supply perating pressure (bar) low (l/min) anual override eight (kg) rawing o. odel *) /2 /8 olenoid/air Internal ush & turn 0, /2 /4 olenoid/spring Internal ush & turn 0, /2 /8 olenoid/spring Internal ush & turn 0, /2 /2 olenoid/spring Internal ush & turn 0, /2 /8 olenoid/solenoid Internal ush & turn 0, /2 /4 olenoid/solenoid Internal ush & turn 0, /2 /8 olenoid/solenoid Internal ush & turn 0, /2 /2 olenoid/solenoid Internal ush & turn 0, /2 /8 olenoid/air Internal ush & turn 0, echnical data, 5/ way valves, solenoid actuated, standard models ymbol *) Insert coil code from below tables. 2 unction ort size id position ctuation/ return ilot supply perating pressure (bar) low (l/min) anual override eight (kg) rawing o. odel *) 5/ /8 olenoid/solenoid Internal ush & turn 0, / /4 olenoid/solenoid Internal ush & turn 0, / /8 olenoid/solenoid Internal ush & turn 0, / /2 olenoid/solenoid Internal ush & turn 0, / /8 olenoid/solenoid Internal ush & turn 0, / /4 olenoid/solenoid Internal ush & turn 0, / /8 olenoid/solenoid Internal ush & turn 0, / /2 olenoid/solenoid Internal ush & turn 0, / /8 olenoid/solenoid Internal ush & turn 0, / /4 olenoid/solenoid Internal ush & turn 0, / /8 olenoid/solenoid Internal ush & turn 0, / /2 olenoid/solenoid Internal ush & turn 0, *) Insert coil code from below tables. = ll orts locked; = entre pen xhaust,; = entre pen ressure oltage codes and spare coils 50 series only 5 mm coil for connector interface acc , form oltage ower Inrush/old odel ode 2 d.c. 2, d.c. 2, /20 50/60 z,7/, /240 50/60 z,7/, onnector plugs - include of delivery 5 mm, (I 4650 ) orm 2-pole + 5/2 /4 olenoid/spring Internal ush & turn 0, /2 /8 olenoid/spring Internal ush & turn 0, /2 /2 olenoid/spring Internal ush & turn 0, /2 /8 olenoid/solenoid Internal ush & turn 0, /2 /4 olenoid/solenoid Internal ush & turn 0, /2 /8 olenoid/solenoid Internal ush & turn 0, /2 /2 olenoid/solenoid Internal ush & turn 0, Industrial standard 22 mm 2-pole series 22 mm coil for connector interface acc. to industrial standard oltage ower Inrush/old odel ode 2 d.c. 2 /48/2/ d.c 2 /48//2 0/20 50/60 z 4/2,5 /48/8/ /240 50/60 z 6/5 /48/9/ en without notice, the specifications given in this document. ( d) 205 orgren mb
3 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve ption selector hread size ubstitute /8 0 /4 /8 2 /2 hread ubstitute /8 /4 /8 /2 -hread ubstitute /8 /4 /8 /2 5-2 oltage (eries 50) ubstitute 2 d.c. 2, d.c. 2,9 0/20 a.c. (50/60 z),7/, 8 220/240 a.c. (50/60 z),7/, 9 oltage (eries ) ubstitute 2 d.c d.c. 2 0/20 a.c. (50/60 z) 4/2, /240 a.c. (50/60 z ) 6/5 9 ctuation ubstitute olenoid/air olenoid/spring 7 olenoid/solenoid unction ubstitute /2 ormally closed 4 5/2 5 5/ ll ports blocked 6 5/ entre open exhaust 7 5/ entre open pressure 8 without notice, the specifications given in this document. ( d) 205 orgren mb en
4 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve echnical data, /2 or 5/2 way valves, pilot actuated, standard models ymbol unction ort size ilot eturn perating pressure (bar) ilot pressure (bar) low (l/min) eight (kg) rawing o. /2 /8 ir ir spring , , X090 odel /2 /4 ir pring , , X090 /2 /8 ir pring , X090 /2 /2 ir pring , X090 /2 /8 ir ir , , X020 /2 /4 ir ir , , X020 /2 /8 ir ir , X020 /2 /2 ir ir , X020 5/2 /8 ir ir spring , , X /2 /4 ir pring , , X090 5/2 /8 ir pring , X090 5/2 /2 ir pring , X090 5/2 /8 ir ir , , X020 5/2 /4 ir ir , , X020 5/2 /8 ir ir , X020 5/2 /2 ir ir , X020 echnical data, 5/ way valves, pilot actuated, standard models ymbol unction ort size ilot id position eturn perating pressure (bar) ilot pressure (bar) low (l/min) eight (kg) rawing o. 5/ /8 ir ir , , X020 5/ /4 ir ir , , X020 5/ /8 ir ir , X020 5/ /2 ir ir , X020 5/ /8 ir ir , , X020 5/ /4 ir ir , , X020 5/ /8 ir ir , X020 5/ /2 ir ir , X020 5/ /8 ir ir , , X020 5/ /4 ir ir , , X020 5/ /8 ir ir , X020 5/ /2 ir ir , X020 = ll orts locked; = entre pen xhaust; = entre pen ressure odel ption selector hread size ubstitute /8 0 /4 /8 2 /2 hread ubstitute /8 /4 /8 /2 -hread ubstitute /8 /4 /8 /2 5 -X 0 0 ir function ubstitute ilot operated/pilot return 2 ilot operated/spring return 9 ilot port thread ubstitute /8 /8 eturn ubstitute ir spring pring 7 ir unction ubstitute /2 ormally closed 4 5/2 5 5/ ll ports blocked 6 5/ entre open exhaust 7 5/ entre open pressure 8 en without notice, the specifications given in this document. ( d) 205 orgren mb
5 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve anifold system and blanking plates anifold for port valves lanking plate for port valves anifold for 5 port valves lanking plate for 5 port valves or valve series age 4 I thread thread age 5 age 4 I thread thread age 5 50 (/8 ) 50*) 50*) *) 505*) (/4 ) 5*) 5*) v 55*) (/8 ) 52*) 52*) *) 525*) (/2 ) 5*) 5*) v 55*) 5055 *) umber of station for stations umber of station 0 for 0 stations without notice, the specifications given in this document. ( d) 205 orgren mb en
6 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve /2 ingle solenoid pilot valve, /8 port ir return 2 /2 ingle solenoid pilot valve, /4... /2 ports pring return imensions in mm rojection/irst angle 2 X 4 I anual override (ush and urn) 2 land size g 7 olenoid rotates 2 x 80 (50), 4 x 90 (5... 5) 4 land size g 9 eries rawing I X 50 99,5,5 2,5 5,5 65 5,2 55, /8 4, /8, ,5 6 0, ,5,5 7, , ,5 / /4, , , ,5 7 46,5 9,5 4 /8 26 9,5 4 /8 4, , ,5 7 46,5 9,5 4 / /2 4,2 8 2, ,5 22 en without notice, the specifications given in this document. ( d) 205 orgren mb
7 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve /2 ouble solenoid pilot valve, /8 port /2 ouble solenoid pilot valve, /4... /2 ports imensions in mm rojection/irst angle 2 X 2 4 I anual override (ush and urn) 2 land size g 7 olenoid rotates 2 x 80 (50), 4 x 90 (5... 5) 4 land size g 9 eries rawing I X 50 44,5 6, ,5 5,2 55, /8 4,5 6,5 2 /8, ,5 6 0, ,5 0,5 4 0, , ,5 / /4, , ,5 7 46,5 9,5 4 / /8 4, , ,5 7 46,5 9,5 4 / /2 4,2 8 2, ,5 22 without notice, the specifications given in this document. ( d) 205 orgren mb en
8 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve 5/2 ingle solenoid pilot valve, /8 port ir return 5 6 5/2 ingle solenoid pilot valve, /4... /2 ports pring return I 4 imensions in mm rojection/irst angle anual override (ush and urn) 2 land size g 7 olenoid rotates 2 x 80 (50), 4 x 90 (5... 5) 4 land size g 9 eries rawing I ,5, /8 /8 29 8,5 4 6 /8, , , , /4 / /4, , , ,5 7 46,5 4,5 4 /8 / ,5 0 /8 4, ,5 7 46,5 7 4 /2 / /2 4,2 8 4, en without notice, the specifications given in this document. ( d) 205 orgren mb
9 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve 5/2 ouble solenoid pilot valve, /8 port 5/2 ouble solenoid pilot valve, /4... /2 ports imensions in mm rojection/irst angle I anual override (ush and urn) 2 land size g 7 olenoid rotates 2 x 80 (50), 4 x 90 (5... 5) 4 land size g 9 eries rawing I ,5, /8 / /8, , /4 / /4, , ,5 7 46,5 4,5 4 /8 / /8 4, ,5 7 46,5 7 4 /2 / /2 4,2 8 4, without notice, the specifications given in this document. ( d) 205 orgren mb en
10 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve 5/ ouble solenoid pilot valve, /8 port 5/ ouble solenoid pilot valve, /4 port imensions in mm rojection/irst angle I 5/ ouble solenoid pilot valve, /8 and /2 ports 4 2 I anual override (ush and urn) 2 land size g 7 olenoid rotates 2 x 80 (50), 4 x 90 (5... 5) 4 land size g 9 eries rawing I ,5, /8 / /8, , , /4 / /4, ,5 48, ,5 79,5 26 5,5 7 46,5 4,5 4 /8 / ,5 0 /8 4, ,5 9,5 29 4,5 7 46,5 7 4 /2 / , /2 4,2 8 4, en without notice, the specifications given in this document. ( d) 205 orgren mb
11 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve /2 ingle air pilot valve, /8 port ir spring return /2 ingle air pilot valve, /4... /2 ports pring return imensions in mm rojection/irst angle 2 X eries rawing X 50 2,5 2,5 5,5 6,5 5, /8 4,5 2 /8, ,5 0,5 /8,5 5,5 7,5 65,5 25 4,2 5 8,5 / /4, ,5 26 /8 7, ,5 46,5 9,5 4 / /8 4, / , ,5 46,5 9,5 4 / /2 4,2 8 2, ,5 /8 7 /2 ouble air pilot valve, /8 port /2 ouble air pilot valve, /4... /2 ports 4 5 X eries rawing X 50 4,5 2,5 5,5 69 5, /8 4,5 2 /8, ,5 0,5 /8,5 5 5,5 7, ,2 5 8,5 / /4, ,5 26 /8 7, ,5 46,5 9,5 4 / /8 4, / , ,5 46,5 9,5 4 / /2 4,2 8 2, ,5 /8 7 without notice, the specifications given in this document. ( d) 205 orgren mb en
12 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve 5/2 ingle air pilot valve, /8 port ir spring return 5/2 ingle air pilot valve, /4... /2 ports pring return imensions in mm rojection/irst angle eries rawing ,5 4,5, /8 / ,5 6 /8, ,5 /8,5, ,5 20 4,2 5 7 /4 / /4, ,5 2 /8 7,5 7, ,5 46,5 4,5 4 /8 / /8 4, / ,5 46,5 7 4 /2 / /2 4,2 8 4, / /2 ouble air pilot valve, /8 port 5/2 ouble air pilot valve, /4... /2 ports eries rawing ,5, /8 / /8, /8, ,2 5 7 /4 / /4, ,5 /8 7, ,5 46,5 4,5 4 /8 / /8 4, / ,5 46,5 7 4 /2 / /2 4,2 8 4,5 2 0 /8 7 en without notice, the specifications given in this document. ( d) 205 orgren mb
13 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve 5/ ouble air pilot valve, /8 port 5/ ouble air pilot valve, /4 port imensions in mm rojection/irst angle / ouble air pilot valve, /8 and /2 ports 22 2 eries rawing ,5, /8 / /8, /8, ,2 5 7 /4 / /4, ,5 45,5 /8 7, ,5 26 5,5 46,5 4,5 4 /8 / /8 4, ,5 / ,5 29 4,5 46,5 7 4 /2 / /2 4,2 8 4, ,5 /8 7 without notice, the specifications given in this document. ( d) 205 orgren mb en
14 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve anifold system, /2 valves for 50 and 5 for 52 and 5 imensions in mm rojection/irst angle eries Ø eight (kg) 50 / , ( x 9) 9 + ( x 9) 0,05 + ( x 0,05) 5 / , ( x 2) 9 + ( x 2) 0,08 + ( x 0,06) 52 / ,5 27 4, ( x ) 9 + ( x ) 0,06 + ( x 0,) 5 / , ( x ) 9 + ( x ) 0,07 + ( x 0,4) = umber of stations anifold system, 5/2 and 5/ valves eries Ø eight (kg) 50 / , ( x 9) 9 + ( x 9) 0,04 + ( x 0,04) 5 / , ( x 2) + ( x 2) 0,07 + ( x 0,06) 52 / , ( x ) 9 + ( x ) 0,06 + ( x 0,09) 5 / , ( x ) 9 + ( x ) 0,08 + ( x 0,5) = umber of stations en without notice, the specifications given in this document. ( d) 205 orgren mb
15 eries, /2, 5/2 or 5/ olenoid actuated and pilot operated spool valve lanking plate imensions in mm rojection/irst angle or unction alve port size eight (kg) odel /2 / , /2 / ,5 0, /2 / , /2 / , /2 / , /2 / ,5 0, /2 / , /2 / ,5 0, arning hese products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under»echnical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult II recision ngineering, orgren mb. hrough misuse, age, or malfunction, components used in fluid power systems can fail in various modes. he system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. ystem designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. ystem designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. without notice, the specifications given in this document. ( d) 205 orgren mb en
UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4
SPOO & SV VAVS monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FATURS Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended
3 Port Solenoid Valve
ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.
RM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5
SOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Model position position Type of actuation
KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
size 3 15 4200 size 4 19 6600
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
10 mm Solenoid Valves. 0,6 W Power Consumption. 10,5 mm wide. 230 l/min air-flow. Service friendly design. High quality solenoid system
10 mm Solenoid Valves 0,6 W Power Consumption 230 l/min air-flow 10,5 mm wide Service friendly design High quality solenoid system Table of Contents page 2 page 5/2 way in-line valves 3 MMD 510 301 24DC
Solenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
3/2-way pneumatic cartridge solenoid valve
3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as
Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
Valves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
indirect electro-pneumatic, pneumatic, manual, mechanical pneumatic spring, mechanical spring G1/8 6,5 890
L-M UNVRSL istributors / - / - UNVRSL Modular System: possibility to create a lot of different valves with a short number of basis elements - ontrol: manual, mechanical,, electric - Traditional UNVR spool
5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double
For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm
High Flow High Pressure Solenoid Valve. Double 3/2 N.C. solenoid valve with manual override
Double 3/2 N.C. solenoid valve with manual override General The high pressure/high flow capacity solenoid valve, as not available on the market, was especially engineered by BIFFI in the early '70s for
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
type V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
G1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
3 Port Solenoid Valve
Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large
Unit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
Control block VOFA with safety function
Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
zamak nitrile rubber self-extinguishing technopolymer aluminum
PS COMBOBOX valves - Valves with compact design: valve body with integrated sub-base - High flexibility: > possibility of choosing fitting dimension (--) according to users needs > manifolds from up to
Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.
Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
RA 23 178/08.99. Functional description 1/10. 4/3-, 4/2- and 3/2 Directional Control Valves Model WE 6.. /E, Series 6X with wet pin AC or DC solenoids
4/3-, 4/- and 3/ Directional Control Valves Model WE 6.. /E, Series 6X with wet pin C or DC solenoids Size 6 (D 03) up to 5100 SI (350 ar) up to 1 GM (80 L/min) R 3 178/06.98 R 3 178/08.99 Replaces: 06.98
ISO 15407-1/2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves
BD ISO 0/ (VDM ) ISO 0 ( mm) ISO 0 ( mm) Valves BDE = solenoid valves ISO 0/ with integrated connection including V DC coils and connector BDB = solenoid valves ISO 0/ with external connection with M connector
Control blocks for two-hand start ZSB
Key features Function This pneumatic control block for twohand start ZSB is used where a manually started operation, such as the triggering of compressed air cylinders, would otherwise involve danger for
servo-controlled 3-WaY vacuum solenoid valves WiTH
servo-controlled 3-WaY vacuum solenoid s WiTH low absorption electric coil The 3-way vacuum solenoid s in this series feature two positions with pneumatically pilot-operated conical shutters. They can
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Open center control block in monoblock design MO-40
Open center control block in monoblock design MO-40 RE 64370 Edition: 02.2015 Replaces: 02.1985 Size 40 Series 1X Maximum working pressure on pump side 350 bar on consumer side 420 bar Maximum flow 680
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
Solenoid/pneumatic valves, Tiger Classic
Solenoid/pneumatic valves, Tiger Classic Electrically or pneumatically actuated valves With internal or external pilot air Sturdy and reliable Specified types in accordance with ATEX directive for potentially
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.
Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the
On-off valves MS-EM/EE, MS series, NPT
On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
zamak nitrile rubber self-extinguishing technopolymes aluminum
G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
2.12. page 223 2.12. Products for Explosion hazardous Environment
2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available
D634-P Series Direct Drive Proportional Valve with Integrated 24 V Electronics ISO 4401 Size 05
D634-P Series Direct Drive Proportional Valve with Integrated 24 V Electronics ISO 4401 Size 05 GENERAL SECTION PAGE MOOG SERVO- AND PROPORTIONAL CONTROL VALVES General 2 enefits and Functionality 3 General
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
5 Port Solenoid Valve
Metal Seal ort Solenoid Valve Series VQ7-6/7-8 Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.6 VQ7-8/Manifold. Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and Size
Valve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
M A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
FILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
Tanktop Mounted Return Line Filters. BGT Series. MAX 2400 I/min - 10 bar LEIF LEIF FILTER FEATURING AN INNOVATIVE GREEN. Low pressure filters
GT Series X 2 I/min - bar N INNOVTIV GRN FITR FTURING IF IF 2 ow pressure filters GT Series Features & enefits Features bar rated filter ast aluminium head IF elements agnetic pre-filtration In-to-Out
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
LEIF LEIF. BGT Series. Tanktop Mounted Return Line Filters Max. 2400 I/min - 10 bar. Patented LEIF elements safeguard filtration quality
GT Series Tanktop ounted Return ine Filters ax. 24 I/min - bar atented IF elements safeguard filtration quality When high flow performance is needed N INNOVTIV GRN FITR FTURING IF IF The GT Series features
3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
STC 3S012-020-A Series Solenoid Valves
STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
Load-sensing control block in mono and sandwich plate design
Load-sensing control block in mono and sandwich plate design RE 64276/08.2010 Replaces: 08.2008 1/64 Type M4-12 Nominal size 12 Unit series 2X Nominal pressure 350 bar (pump side) Nominal pressure 420
zamak nitrile rubber selfestinguishing technopolymer aluminum B10 24 V DC (± 10%) holding 0,32 W, pick-up 5,5 W (25 ms) IP65 button with tool
P0 0mm COMPCT valves - threaded body and for sub-base mounting - Low standard power consumption (0,W): low power consumption electropilot B0 (standard version with LED) - Quick response times - High flow
LSB Series. Valve Position Monitor. www.powergenex.com. All innovation on driving your valve automation
LS Series Valve Position Monitor ll innovation on driving your valve automation www.powergenex.com LS-1000 Series Valve Position Monitor Robust valve position monitor with a good recognizable beacon, various
Pressure reducing valve, direct operated, Type ZDR 6 D
RE 26 57/2.3 Replaces:.2 Pressure reducing valve, direct operated, ype ZDR 6 D Nominal size 6 Series 4X aximum operating pressure 2 bar aximum flow 5 L/min K 4279/ ype ZDR 6 DP2 4X/ Y Overview of contents
E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
Directional Controls
Vickers Directional Controls DG5S-8 and DG5S-H8 wo-stage, Solenoid Controlled, ilot Operated, Four-Way Directional Valves Revised 11/94 591 Introduction General Description he DG5S-8 and DG5S-H8 are two-stage
Process Valve. 2 Port Valve For Compressed Air and Air-hydro Circuit Control
Process Valve Series VN Port Valve For Compressed ir and ir-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Valve [Option] Cylinder actuation by external
Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
PRESSURE RELIEF VALVES VALVOLE DI MASSIMA PRESSIONE
RESSURE RELIEF VALVES VALVOLE DI MASSIMA RESSIONE 31 ECHNICAL DAA Max : Cavity: Installation torque: ressure Relief Valve - Cartridge Valvola Massima ressione - Cartuccia WMD 5 5 l/min 45 Cartridge in
valvole 16 mm ad azionamento pneumatico pneumatically piloted valves - 16 mm
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time
Custom configuration such as modified angle dimensions, other flange standards, 3-way function, alternative materials.are available on request.
LEAKVALVE: HIGHLIGHTS The core of this valve is a diaphragm in stainless steel 316L, gold plated. Robust, it cannot be damaged with any normal methods. The dead volume is kept as small as possible. There
Recognizing and understanding schematic symbols will enable you to comprehend a circuit s function.
Schematic symbols are used to identify and graphically depict the function of fluid power components. Recognizing and understanding schematic symbols will enable you to comprehend a circuit s function.
Brueninghaus Hydromatik. Variable Displacement Pump A11VO RE 92 500/07.00. for open circuits
RE 92 500/07.00 Replaces: 03.97 Variable isplacement Pump A11VO for open circuits izes 40 260 eries 1 Nominal pressure 350 bar Peak pressure 400 bar A11VO Index Features 1 Ordering Code / tandard Program
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
Multi-talented. Valve and valve terminal series VG
Valve and valve terminal series VG Multi-talented. Highlights VUVG Compact with high flow rate Can be expanded to form a valve terminal with an individual connection 2x 3/2 one valve, two functions Simple
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
Compact power modules
Compact power modules Replaces: 07.12 1/22 DL series Summary Description Page Ordering details 2 echnical data 4 A.C. Electric motors 9 Central manifolds 11 Flow restrictor 16 Coils and connector 16 Gear
Type Function Namur Port size Max. air flow Operating pressure Weight
DRN 3 601/DRN PN 5313 701/PN 611 /DRN 5313 121 128 2.8.4.1.1 2.8.2.3 Seite page oldal 161 PNDRN 531 701 3 601 PNDRN 531 121 3 611 DRN 3 128 PN 531 701 DRN 3 601 BlockPneumatikus form flow regulator vezérlésű
0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3
Port Solenoid Valve 00/00/00 Metal Seal Rubber Seal 0. 0.9 (Standard) (High pressure type, High speed response type) Power consumption: 0. W/0.9 W Compact, High Flow Body ported Base mounted 00 00 00 00
ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions
4057250/8 IM-P405-16 AB Issue 8 ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Operation
Aluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
2 position single. (Standard) 100V AC 50/60Hz 200V AC 50/60Hz 24V DC. 2 position double
4/ Port Solenoid Valve Rubber Seal VZ1000/000/000 Solenoid Valve Variations Port Size Effective area (mm 2 ) Position solenoid Voltage Electrical entry Option/ Indicator light and surge voltage suppressor
Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational