Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
|
|
|
- Erin Parsons
- 7 years ago
- Views:
Transcription
1 Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be flushed out high operating reliability - no shearing of the high grade steel stem injected into the ball, even at high torque extremely low clearance volume - the body encloses the ball due to the special die casting method optimised kv value - for all sizes, the internal ball diameter is constructively adapted to the internal pipe diameter DN - DN 0 lockable - manipulations are excluded due to the optionally available locking plate Application chemical plants industrial plants water treatment Utilisation for shutting off pipeline systems Flow Media Neutral and aggressive fluid or gaseous media free of solid particles, provided that the valve components coming into contact with the media are resistant at the operating temperature in accordance with the ASV resistance guide. Testing Requirements and tests/inspections according to DIN, 2 and 0. DIN EN 22, leakage rate A tested. Nominal Pressure (H 2 O, C) PN - PN Fluid Temperature see pressure/temperature diagram Operating Pressure see pressure/temperature diagram Size DN 0 - DN 0 Body PVC-U Stem stainless steel (.0) Ball PE Ball Seat PTFE Sealing Actuation with T-handle, simultaneously serving as a position indicator with electric actuator, DIN EN ISO 2 with pneumatic actuator, DIN EN ISO 2 Connection flange DIN, PN 0/, with DIN face-to-face dimension (DN 0 DIN 2 F; > DN 0 DIN 2 F) PP/steel flange DIN, PN 0/, with DIN face-to-face dimension (DN 0 DIN 2 F; > DN 0 DIN 2 F) Mounting as required Accessories limit switch unit lockable hand lever locking plate Colour body: PVC-U, grey, RAL 0 hand lever: PVC-U, orange, RAL 0 hand lever: die casting, orange, RAL 0 Flanges: black, RAL PP/Steel Flanges: black, RAL > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
2 Ball valve C Pressure loss curve (standard values for H 2 O, C) Operating note Safe operation of the valve can only be ensured if it is properly installed, operated, serviced or repaired by qualified personnel according to its intended use while observing the accident prevention regulations, safety regulations, relevant standards, directives/technical regulations or codes of practice such as e.g. DIN, DIN EN, DIN ISO and DVS*. *DVS = German Welding Society The intended use includes adhering to specified limit values for pressure and temperature, as well as checking the resistance. This requires all components coming into contact with the medium to be "resistant" in accordance with the ASV resistance guide. P = pressure loss Q = flow pressure loss and k v value The diagram shows the pressure loss P in relation to the flow Q. Conversion aid: c v = k v x 0.0; f v = k v x 0.0 Units: k v [l/min]; c v [gal/min] US; f v [gal/min] GB Flow characteristic VO = valve opening FR = K v value Torque (Nm) The specified torques are standard values. They were determined at the specified nominal pressures with H 2 O, C. These values can be higher or lower, depending on the operating pressure and the medium. 2 > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
3 Ball valve C, manual body PVC-U ball PE size d(mm) pressure range DN(mm) DN(inch) 2 2 /2 PN(bar) Connection ball seat sealing ident No flange DIN EN 02 PTFE. kg 22.0 kg 2. kg kg kg 22.0 kg flange DIN EN 02 PTFE 0. kg 22. kg.0 kg. kg. kg.2 kg > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
4 Ball valve C, manual DN 0 dimensions d(mm) DN(mm) DN(inch) / dimensions(mm) DN - DN 0 A b b d2 dk D DG f f g H K L M N X z x x x x x x 22 > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
5 Ball valve C, electric Voltage please refer to the technical data further drive variants and options on request Mounting Set DN 0-2: stainless steel (.0); DN 0: painted steel Coupling steel square, galvanised adaptor made of aluminium Screws stainless steel (.0) Actuator variant V body PVC-U ball PE size d(mm) pressure range DN(mm) DN(inch) 2 2 /2 PN(bar) Connection ball seat sealing ident No flange DIN EN 02 PTFE 0.0 kg kg kg kg kg kg flange DIN EN 02 PTFE kg 2. kg 0.0 kg 0. kg 0 0. kg 0. kg > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
6 Ball valve C, electric dimensions d(mm) DN(mm) DN(inch) 0 2 OA 2 /2 OA 0 OA 0 00 OA 0 2 AS 0 0 AS dimensions(mm) b b d2 dk D f f h H K L N N O O P z > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
7 Ball valve C, electric Technical data Torque Voltage Manipulating time(s) Power consumption(w) Setting angle( ) Weight(kg) Duty cycle(%) Type of protection Temperature( C) OA 0 VAC 0 0 IP OA 00 VAC 0 0 IP OA (*) 0 00 VAC 0 0 IP OA (*) VAC 00 0 IP (*) Drive variants: please order separately. Customer's wiring is given as an example only and is not part of the actuator supply, Check power supply specifications prior to installing the device. Warning : Open and Close commands must not be activated simultaneously in order to properly isolate the unused motor winding. Technical data AS Torque 0 Voltage VAC Manipulating time(s) Power consumption(w) Setting angle( ) Weight(kg) Duty cycle(%) 0 Type of protection IP Temperature( C) (*) Drive variants: please order separately. AS (*) 0 00 VAC 00 0 IP > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
8 Ball valve C, electric Function of switches: Direction of rotation (viewed from top through the actuator onto the valve shaft) I) Anti-clockwise (normally open). II) Clockwise (normally close). Note: The torque switches provide a momentary contact. Exception: Type SRA.2 drive The travel limits provide a continuous contact. > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
9 Ball valve C, pneumatic Control Pressure bar Control Function NC (normally closed) NO (normally open) (double acting) Standard visual position indicator further options such as limit switch unit, positioner or pilot valves on request Mounting Set DN 0-2: stainless steel (.0); DN 0: painted steel Coupling steel square, galvanised adaptor made of aluminium Screws stainless steel (.0) Actuator variant NC body PVC-U ball PE size d(mm) pressure range DN(mm) DN(inch) 2 2 /2 PN(bar) Connection ball seat sealing ident No flange DIN EN 02 PTFE 0.0 kg kg kg kg kg 22.0 kg flange DIN EN 02 PTFE 00.0 kg 2.0 kg.0 kg 22.0 kg.0 kg. kg Actuator variant NO body PVC-U ball PE size d(mm) pressure range DN(mm) DN(inch) 2 2 /2 PN(bar) Connection ball seat sealing ident No flange DIN EN 02 PTFE 0.0 kg kg kg kg kg 22.0 kg flange DIN EN 02 PTFE 00.0 kg 2.0 kg.0 kg 22.0 kg.0 kg. kg > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
10 Ball valve C, pneumatic Actuator variant body PVC-U ball PE size d(mm) pressure range DN(mm) DN(inch) 2 2 /2 PN(bar) Connection ball seat sealing ident No flange DIN EN 02 PTFE 0.0 kg kg kg kg kg kg flange DIN EN 02 PTFE 00.0 kg 2.0 kg 0. kg 0.0 kg 0.0 kg 0.0 kg 0 > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
11 Ball valve C, pneumatic DN 0 dimensions d(mm) DN(mm) DN(inch) 0 2 PP0 PPS 2 /2 PP0 PPS 0 PP PA2S 0 00 PP PA0S 0 2 PA2 P0S 0 0 PA2 P0S dimensions(mm) DN - DN 0 / / / / b b d2 dk D f f h H H K L N N O O P P z N/O/P/H = NC-NO N/O/P/H = > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
12 Ball valve C, pneumatic Technical data PA-Line Option (to be ordered additionally if required) limit switch unit; positioner; handwheel; pilot solenoid valve; AS Interface connection Function Torque (start) at bar(nm) Torque (end) at bar(nm) Control volume (Opening)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) Function Torque (start) at bar(nm) Control volume (Opening)(Liter) Control volume (Closing)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) PA0S /. PA /. PA2S /. Control pressure connection Normally closed NC: control pressure to connection»b«,valve opens Normally open NO: control pressure to connection»b«,valve closes Double acting : control pressure to connection»a«,valve closes control pressure to connection»b«,valve opens Control: /2-way solenoid valves for actuators /2-way solenoid valves for actuators Note: The drives require a control pressure of bar for optimum function. Malfunctions may occur, if the control pressure deviates. In this case, a new drive configuration is necessary. Technical data PP-Line Option (to be ordered additionally if required) limit switch unit; positioner; handwheel; pilot solenoid valve; AS Interface connection Function Torque (start) at bar(nm) Torque (end) at bar(nm) Control volume (Opening)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) PPS /. 2 > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
13 Ball valve C, pneumatic Function Torque (start) at bar(nm) Control volume (Opening)(Liter) Control volume (Closing)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) Control pressure connection PP /. PP / 2. Normally closed NC: control pressure to connection»b«,valve opens Normally open NO: control pressure to connection»b«,valve closes Double acting : control pressure to connection»a«,valve closes control pressure to connection»b«,valve opens Control: /2-way solenoid valves for actuators /2-way solenoid valves for actuators Note: The drives require a control pressure of bar for optimum function. Malfunctions may occur, if the control pressure deviates. In this case, a new drive configuration is necessary. Technical data P-Line Option (to be ordered additionally if required) limit switch unit; positioner; handwheel; pilot solenoid valve; AS Interface connection Function Torque (start) at bar(nm) Torque (end) at bar(nm) Control volume (Opening)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) P0S /. > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
14 Ball valve C, pneumatic Control pressure connection Normally closed NC: control pressure to connection»b«,valve opens Normally open NO: control pressure to connection»b«,valve closes Double acting : control pressure to connection»a«,valve closes control pressure to connection»b«,valve opens Control: /2-way solenoid valves for actuators /2-way solenoid valves for actuators Note: The drives require a control pressure of bar for optimum function. Malfunctions may occur, if the control pressure deviates. In this case, a new drive configuration is necessary. > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
15 Ball valve C parts lists position 2 quantity designation body with ball cap end position limiter pressure piece O-ring hand lever hexagon bolt > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
16 Ball valve C > data sheet no.: 0 - /0/0 ASVStübbe GmbH & Co. KG Hollwieser Str. D-2 Vlotho Tel. +(0). -0 Fax +(0) contact@asv-stuebbe.de
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
SISTO-16TWA/HWA/DLU. Type Series Booklet
Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
Custom configuration such as modified angle dimensions, other flange standards, 3-way function, alternative materials.are available on request.
LEAKVALVE: HIGHLIGHTS The core of this valve is a diaphragm in stainless steel 316L, gold plated. Robust, it cannot be damaged with any normal methods. The dead volume is kept as small as possible. There
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
Output torques up to 8000 Nm. General features. Protection. External coating. Working temperature range
Type series booklet 8521.15/2--10 ACTELEC 31 to 800 (BERNARD) 1/4 turn electric actuators (irreversible reducer with multi -turn electric actuator ACTELEC 31: screw -nut kinematics ACTELEC 200 to 800:
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
Diaphragm Actuators Favorable Variety Pneumatic Diaphragm Actuators Electric Actuators Hydraulic Actuators
Favorable Variety Whether rotary or linear with pneumatic, electric, and hydraulic valve actuators from ARCA Regler GmbH, you always have the right solution at hand. ARCA s comprehensive product portfolio
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
Butterfly Valves PN 6/10/16 for flanged connection
4 136 ACVATIX Butterfly Valves PN 6/10/16 for flanged connection tight-closing VKF46.. VKF46..TS Grey cast iron housing EN-GJL-250 (to DN 300) nodular cast iron housing EN-GJS-400-15 (from DN 350) DN 40
4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
Instructions Manual. Electromagnetic sensor Series FLOMID FX. instrumentation for fluids. R-MI-FlomidFX Rev.: 0 English version
instrumentation for fluids Electromagnetic sensor Series FLOMID FX Instructions Manual! Conforms with the Pressure Equipment Directive 97/23/EC. 0830 This equipment is considered as being a pressure accessory
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
Hydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
3/2-way pneumatic cartridge solenoid valve
3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as
Order Code for GEA Tuchenhagen VESTA Sterile Valves. Type H_A 2/2 Way Seat Valve
Order Code for VESTA Sterile Valves Type H_A 2/2 Way Seat Valve engineering for a better world GEA Mechanical Equipment VESTA Sterile Valves are designed for universal use in sterile process technology.
Stop valve with soft seal. Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Straight through with flanges ARI-EURO-WEDI
ARI-EURO-WEDI Stop valve with soft seal Free of maintenance stop valve - soft sealed (to 120 C) ARI-EURO-WEDI - Fig. 070 Page 2 ARI-EURO-WEDI - Fig. 071 Page 2 ARI-EURO-WEDI - Hood valve Fig. 070 Fig.
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Type overview. Technical data
Technical data sheet R3..xx-S.. Characterised control valve, 3-way, Internal thread For closed cold and warm water systems For modulating water-side control of air handling units and heating systems ir
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
Combi switchbox with integrated 3/2 way pilot valve
H Combi switchbox with integrated 3/2 way pilot valve Construction The GEMÜ combi switchbox with integrated 3/2 way pilot valve for pneumatically operated quarter turn actuators has a micro-processor controlled
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
British Standard Underground Hydrant Range
British Standard Underground Hydrant Range 2 THE NEW AVK BRITISH STANDARD HYDRANT RANGE AVK are the renowned market leading innovators, manufacturers and suppliers of BS 750 fire hydrants into the UK,
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
Control- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
How To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational
VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
Threaded Resistance Thermometers Model TR10-D, Miniature Design
Electrical Temperature Measurement Threaded Resistance Thermometers Model TR10-D, Miniature Design WIKA Data Sheet TE 60.04 Applications Machine building, plant and tank construction Power transmission
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
Pressure relief valves Size 6
Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are
Butter y valves Plastic and Metal
Butter y valves Plastic and Metal VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement and control systems. Fritz
Kämmer Series 185000 Laboratory Valves
flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless
Norbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
Operating instructions Mechatronic flow sensor. SBY33x 704465/06 03/2011
Operating instructions Mechatronic flow sensor SBY33x 7065/06 03/2011 Contents 1 Safety instructions...2 2 Functions and features...3 3 Installation...3 Electrical connection... 5 Switch point setting...
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
Richter Twin Piston Quarter-turn Actuators
Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter
The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.
D e s c r i p t i o n 500 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron. A major feature of these
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
ISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions
4057250/8 IM-P405-16 AB Issue 8 ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Operation
Puddle Flange. FRANK Puddle Flange
Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many
2- and 3-port valves with flanged connections, PN 10
4 402 VVF32.. VXF32.. ACVATIX 2 and 3port valves with flanged connections, PN 10 From the largestroke valve line VVF32.. VXF32.. Performance valves for medium temperatures from 10 150 C Valve body of grey
ARI-ASTRA / ASTRA Plus Combinend flow regulating valve
ARI-ASTRA - Free of maintenance combinend flow regulating valve - soft sealed (to 120 C) ARI-ASTRA Plus - Free of maintenance combinend flow regulating valve (to 175 C resp. 350 C) ARI-ASTRA / ASTRA Plus
15/40/80CN Series Medium Pressure Filters
1/4/8CN Series Medium Pressure Filters Max 32 l/min - 7 bar Global Filtration Technology 1/4/8CN Series TYPICAL APPLICATIONS Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard)
Wafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
Vacuum Gate Valve DN 100 and DN 150
Vacuum Gate Valve DN 100 and DN 150 WER Dok.E.02.050_02.051 1. Introduction/Safety Instructions 2. Description 3. Technical Data 4. Installation 5. Operation 6. Maintenance Instructions 7. Spare Parts
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
Overview of types. Technical data
Technical data sheet R3..xx-S.. Characterised control valves, 3-way, with internal thread For closed cold and warm water systems For modulating water-side control of HU and heating systems ir bubble-tight
IOM SERIES 820-E/P Electro-Pneumatic Positioner
FLUID CONTROL DIVISION Parker Hannifin Corporation 95 Edgewood Avenue New Britain, CT 06051 Telephone (860) 827-2300 IOM SERIES 820-E/P Electro-Pneumatic Positioner INSTALLATION, OPERATING & MAINTENANCE
Fixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
Check Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
VdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
Ventilstandarder ett urval av standarder
EN 19:2002 EN 558:2008+A1:2011 EN 593:2009+A1:2011 EN 736-1:1995 EN 736-2:1997 EN 736-3:2008 EN 1074-1:2000 EN 1074-2:2000, A1:2004 EN 1074-3:2000 EN 1074-4:2000 EN 1075-5:2001 EN 1074-6:2008 EN 1171:2002
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications. The
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
1.1 Z 011-A WAFER PATTERN BUTTERFLY TYP Z 011-A TECHNICAL DATA
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
Self-operated Temperature Regulators Type 1 to Type 9. PN 16 to 40 Class 125 to 300 DN 15 to 250 NPS ½ to 10 G ½ to 1 Up to 350 C Up to 660 F
Self-operated Temperature Regulators Type 1 to Type 9 PN 16 to 40 Class 125 to 300 DN 15 to 250 NPS ½ to 10 G ½ to 1 Up to 350 C Up to 660 F Edition April 2012 Information Sheet T 2010 EN Self-operated
VAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
Dampers. Inlet guide vane. Damper. Louvre damper. Handbook Radial Fans / Chapter 3 - Dampers REITZ List 2010 DO 1. Dampers
Inlet guide vane Damper ouvre damper Handbook Radial Fans / Chapter 3 - REITZ ist 2010 DO 1 Technical description rticle number and order code article number = component size DR D1 0 3-000 031-00 variant
Line-Mounted Valves L Series
Spare Part Kit for Valve Series B1LSAD3 Line-Mounted L Series Accessories Spare Part Kits All Series Valve Series B1LSAD3 40.1609 Incl. O-rings, gaskets, spring or muffl er Spare Part Kit for Valve Series
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
Direct steam injection humidifiers
Direct steam injection humidifiers Direct steam injection gives quality control of air humidity. Research and development in separation, the use of lightweight stainless steel combined a constant temperature
DN [mm] [m 3 /h] Characterizing disk Dimensions / Weights see «Dimensions and weights», page 3 Motorizing
![DN [mm] [m 3 /h] Characterizing disk Dimensions / Weights see «Dimensions and weights», page 3 Motorizing](/thumbs/40/21574271.jpg "DN [mm] [m 3 /h] Characterizing disk Dimensions / Weights see «Dimensions and weights», page 3 Motorizing")
Technical data sheet R5.. Characterized control valves, 3-way, with external thread for open and closed cold and warm water systems for modulating control on the water side of air-handling and heating
PLASTIC VOLUME CONTROL DAMPERS OVERVIEW TYPE: GGB
OVERVIEW TYPE: GGB All composite construction Rigid extruded upvc aerofoil blade section Integral blade seals for low leakage operation Individual blades driven via reinforced styrene gear wheels in maintenance